aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--darwin-user/mmap.c2
-rw-r--r--disas.c2
-rw-r--r--exec.c2
-rw-r--r--hw/cirrus_vga.c2
-rw-r--r--hw/cuda.c4
-rw-r--r--hw/ne2000.c6
-rw-r--r--hw/scsi-disk.c2
-rw-r--r--hw/vga.c2
-rw-r--r--linux-user/elfload.c4
-rw-r--r--sdl.c3
-rw-r--r--target-i386/translate.c2
11 files changed, 16 insertions, 15 deletions
diff --git a/darwin-user/mmap.c b/darwin-user/mmap.c
index ada613d361..b4055abe1b 100644
--- a/darwin-user/mmap.c
+++ b/darwin-user/mmap.c
@@ -199,7 +199,7 @@ long target_mmap(unsigned long start, unsigned long len, int prot,
if (!(flags & MAP_FIXED)) {
#if defined(__alpha__) || defined(__sparc__) || defined(__x86_64__)
- /* tell the kenel to search at the same place as i386 */
+ /* tell the kernel to search at the same place as i386 */
if (host_start == 0) {
host_start = last_start;
last_start += HOST_PAGE_ALIGN(len);
diff --git a/disas.c b/disas.c
index fd14f682ae..2642c778dd 100644
--- a/disas.c
+++ b/disas.c
@@ -134,7 +134,7 @@ print_insn_thumb1(bfd_vma pc, disassemble_info *info)
}
#endif
-/* Disassemble this for me please... (debugging). 'flags' has teh following
+/* Disassemble this for me please... (debugging). 'flags' has the following
values:
i386 - nonzero means 16 bit code
arm - nonzero means thumb code
diff --git a/exec.c b/exec.c
index 61d8f61ab5..0e415a5e9b 100644
--- a/exec.c
+++ b/exec.c
@@ -1220,7 +1220,7 @@ CPULogItem cpu_log_items[] = {
{ CPU_LOG_EXEC, "exec",
"show trace before each executed TB (lots of logs)" },
{ CPU_LOG_TB_CPU, "cpu",
- "show CPU state before bloc translation" },
+ "show CPU state before block translation" },
#ifdef TARGET_I386
{ CPU_LOG_PCALL, "pcall",
"show protected mode far calls/returns/exceptions" },
diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
index 2cbafe1745..e5b0cfb653 100644
--- a/hw/cirrus_vga.c
+++ b/hw/cirrus_vga.c
@@ -2784,7 +2784,7 @@ static void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
case 0x09:
case 0x0c:
case 0x0d:
- case 0x12: /* veritcal display end */
+ case 0x12: /* vertical display end */
s->cr[s->cr_index] = val;
break;
diff --git a/hw/cuda.c b/hw/cuda.c
index c290450785..dc143e2052 100644
--- a/hw/cuda.c
+++ b/hw/cuda.c
@@ -445,9 +445,9 @@ static void cuda_update(CUDAState *s)
cuda_update_irq(s);
} else {
if (!(s->last_b & TIP)) {
- /* handle end of host to cuda transfert */
+ /* handle end of host to cuda transfer */
packet_received = (s->data_out_index > 0);
- /* always an IRQ at the end of transfert */
+ /* always an IRQ at the end of transfer */
s->ifr |= SR_INT;
cuda_update_irq(s);
}
diff --git a/hw/ne2000.c b/hw/ne2000.c
index 1830ab5482..1625c55388 100644
--- a/hw/ne2000.c
+++ b/hw/ne2000.c
@@ -325,7 +325,7 @@ static void ne2000_ioport_write(void *opaque, uint32_t addr, uint32_t val)
s->cmd = val;
if (!(val & E8390_STOP)) { /* START bit makes no sense on RTL8029... */
s->isr &= ~ENISR_RESET;
- /* test specific case: zero length transfert */
+ /* test specific case: zero length transfer */
if ((val & (E8390_RREAD | E8390_RWRITE)) &&
s->rcnt == 0) {
s->isr |= ENISR_RDC;
@@ -340,7 +340,7 @@ static void ne2000_ioport_write(void *opaque, uint32_t addr, uint32_t val)
if (index + s->tcnt <= NE2000_PMEM_END) {
qemu_send_packet(s->vc, s->mem + index, s->tcnt);
}
- /* signal end of transfert */
+ /* signal end of transfer */
s->tsr = ENTSR_PTX;
s->isr |= ENISR_TX;
s->cmd &= ~E8390_TRANS;
@@ -550,7 +550,7 @@ static inline void ne2000_dma_update(NE2000State *s, int len)
if (s->rcnt <= len) {
s->rcnt = 0;
- /* signal end of transfert */
+ /* signal end of transfer */
s->isr |= ENISR_RDC;
ne2000_update_irq(s);
} else {
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 92f745726f..384c098a09 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -489,7 +489,7 @@ int32_t scsi_send_command(SCSIDevice *s, uint32_t tag, uint8_t *buf, int lun)
is_write = 1;
break;
case 0x35:
- DPRINTF("Syncronise cache (sector %d, count %d)\n", lba, len);
+ DPRINTF("Synchronise cache (sector %d, count %d)\n", lba, len);
bdrv_flush(s->bdrv);
break;
case 0x43:
diff --git a/hw/vga.c b/hw/vga.c
index 9dbbfe2379..8661d00d35 100644
--- a/hw/vga.c
+++ b/hw/vga.c
@@ -346,7 +346,7 @@ static void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
case 0x09:
case 0x0c:
case 0x0d:
- case 0x12: /* veritcal display end */
+ case 0x12: /* vertical display end */
s->cr[s->cr_index] = val;
break;
default:
diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index c1306929cb..c0845fe650 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -799,7 +799,7 @@ static unsigned long load_elf_interp(struct elfhdr * interp_elf_ex,
#endif
if (interp_elf_ex->e_type == ET_DYN) {
- /* in order to avoid harcoding the interpreter load
+ /* in order to avoid hardcoding the interpreter load
address in qemu, we allocate a big enough memory zone */
error = target_mmap(0, INTERP_MAP_SIZE,
PROT_NONE, MAP_PRIVATE | MAP_ANON,
@@ -1191,7 +1191,7 @@ int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
base, as well as whatever program they might try to exec. This
is because the brk will follow the loader, and is not movable. */
/* NOTE: for qemu, we do a big mmap to get enough space
- without harcoding any address */
+ without hardcoding any address */
error = target_mmap(0, ET_DYN_MAP_SIZE,
PROT_NONE, MAP_PRIVATE | MAP_ANON,
-1, 0);
diff --git a/sdl.c b/sdl.c
index 6c30db146d..dc11937cf2 100644
--- a/sdl.c
+++ b/sdl.c
@@ -407,7 +407,8 @@ static void sdl_refresh(DisplayState *ds)
case SDLK_END: keysym = QEMU_KEY_END; break;
case SDLK_PAGEUP: keysym = QEMU_KEY_PAGEUP; break;
case SDLK_PAGEDOWN: keysym = QEMU_KEY_PAGEDOWN; break;
- case SDLK_BACKSPACE: keysym = QEMU_KEY_BACKSPACE; break; case SDLK_DELETE: keysym = QEMU_KEY_DELETE; break;
+ case SDLK_BACKSPACE: keysym = QEMU_KEY_BACKSPACE; break;
+ case SDLK_DELETE: keysym = QEMU_KEY_DELETE; break;
default: break;
}
}
diff --git a/target-i386/translate.c b/target-i386/translate.c
index e36e03d820..96e72c9dd8 100644
--- a/target-i386/translate.c
+++ b/target-i386/translate.c
@@ -6431,7 +6431,7 @@ static void optimize_flags(uint16_t *opc_buf, int opc_buf_len)
opc_ptr = opc_buf + opc_buf_len;
/* live_flags contains the flags needed by the next instructions
- in the code. At the end of the bloc, we consider that all the
+ in the code. At the end of the block, we consider that all the
flags are live. */
live_flags = CC_OSZAPC;
while (opc_ptr > opc_buf) {