| Age | Commit message (Collapse) | Author |
|---|
|
QAT_401xx is a derivative of 4xxx. Add support for that device in the
qat_4xxx driver by including the DIDs (both PF and VF), extending the
probe and the firmware loader.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Srinivas Kerekare <srinivas.kerekare@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Re-enable the registration of algorithms after fixes to (1) use
pre-allocated buffers in the datapath and (2) support the
CRYPTO_TFM_REQ_MAY_BACKLOG flag.
This reverts commit 8893d27ffcaf6ec6267038a177cb87bcde4dd3de.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If a request has the flag CRYPTO_TFM_REQ_MAY_SLEEP set, allocate memory
using the flag GFP_KERNEL otherwise use GFP_ATOMIC.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reject requests with a source buffer that is bigger than the size of the
key. This is to prevent a possible integer underflow that might happen
when copying the source scatterlist into a linear buffer.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reject requests with a source buffer that is bigger than the size of the
key. This is to prevent a possible integer underflow that might happen
when copying the source scatterlist into a linear buffer.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The functions qat_dh_compute_value() allocates memory with
dma_alloc_coherent() if the source or the destination buffers are made
of multiple flat buffers or of a size that is not compatible with the
hardware.
This memory is then freed with dma_free_coherent() in the context of a
tasklet invoked to handle the response for the corresponding request.
According to Documentation/core-api/dma-api-howto.rst, the function
dma_free_coherent() cannot be called in an interrupt context.
Replace allocations with dma_alloc_coherent() in the function
qat_dh_compute_value() with kmalloc() + dma_map_single().
Cc: stable@vger.kernel.org
Fixes: c9839143ebbf ("crypto: qat - Add DH support")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After commit f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP"), if
the algorithms are enabled, the driver crashes with a BUG_ON while
executing vunmap() in the context of a tasklet. This is due to the fact
that the function dma_free_coherent() cannot be called in an interrupt
context (see Documentation/core-api/dma-api-howto.rst).
The functions qat_rsa_enc() and qat_rsa_dec() allocate memory with
dma_alloc_coherent() if the source or the destination buffers are made
of multiple flat buffers or of a size that is not compatible with the
hardware.
This memory is then freed with dma_free_coherent() in the context of a
tasklet invoked to handle the response for the corresponding request.
Replace allocations with dma_alloc_coherent() in the functions
qat_rsa_enc() and qat_rsa_dec() with kmalloc() + dma_map_single().
Cc: stable@vger.kernel.org
Fixes: a990532023b9 ("crypto: qat - Add support for RSA algorithm")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When an RSA key represented in form 2 (as defined in PKCS #1 V2.1) is
used, some components of the private key persist even after the TFM is
released.
Replace the explicit calls to free the buffers in qat_rsa_exit_tfm()
with a call to qat_rsa_clear_ctx() which frees all buffers referenced in
the TFM context.
Cc: stable@vger.kernel.org
Fixes: 879f77e9071f ("crypto: qat - Add RSA CRT mode")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The implementations of the crypto algorithms (aead, skcipher, etc) in
the QAT driver do not properly support requests with the
CRYPTO_TFM_REQ_MAY_BACKLOG flag set. If the HW queue is full, the driver
returns -EBUSY but does not enqueue the request. This can result in
applications like dm-crypt waiting indefinitely for the completion of a
request that was never submitted to the hardware.
Fix this by adding a software backlog queue: if the ring buffer is more
than eighty percent full, then the request is enqueued to a backlog
list and the error code -EBUSY is returned back to the caller.
Requests in the backlog queue are resubmitted at a later time, in the
context of the callback of a previously submitted request.
The request for which -EBUSY is returned is then marked as -EINPROGRESS
once submitted to the HW queues.
The submission loop inside the function qat_alg_send_message() has been
modified to decide which submission policy to use based on the request
flags. If the request does not have the CRYPTO_TFM_REQ_MAY_BACKLOG set,
the previous behaviour has been preserved.
Based on a patch by
Vishnu Das Ramachandran <vishnu.dasx.ramachandran@intel.com>
Cc: stable@vger.kernel.org
Fixes: d370cec32194 ("crypto: qat - Intel(R) QAT crypto interface")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Kyle Sanderson <kyle.leet@gmail.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All the algorithms in qat_algs.c and qat_asym_algs.c use the same
pattern to submit messages to the HW queues. Move the submission loop
to a new function, qat_alg_send_message(), and share it between the
symmetric and the asymmetric algorithms.
As part of this rework, since the number of retries before returning an
error is inconsistent between the symmetric and asymmetric
implementations, set it to a value that works for both (i.e. 20, was 10
in qat_algs.c and 100 in qat_asym_algs.c)
In addition fix the return code reported when the HW queues are full.
In that case return -ENOSPC instead of -EBUSY.
Including stable in CC since (1) the error code returned if the HW queues
are full is incorrect and (2) to facilitate the backport of the next fix
"crypto: qat - add backlog mechanism".
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to do DMAs, the QAT device requires that the scatterlist
structures are mapped and translated into a format that the firmware can
understand. This is defined as the composition of a scatter gather list
(SGL) descriptor header, the struct qat_alg_buf_list, plus a variable
number of flat buffer descriptors, the struct qat_alg_buf.
The allocation and mapping of these data structures is done each time a
request is received from the skcipher and aead APIs.
In an OOM situation, this behaviour might lead to a dead-lock if an
allocation fails.
Based on the conversation in [1], increase the size of the aead and
skcipher request contexts to include an SGL descriptor that can handle
a maximum of 4 flat buffers.
If requests exceed 4 entries buffers, memory is allocated dynamically.
[1] https://lore.kernel.org/linux-crypto/20200722072932.GA27544@gondor.apana.org.au/
Cc: stable@vger.kernel.org
Fixes: d370cec32194 ("crypto: qat - Intel(R) QAT crypto interface")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Set to zero the context buffers containing the DH key before they are
freed.
This is a defense in depth measure that avoids keys to be recovered from
memory in case the system is compromised between the free of the buffer
and when that area of memory (containing keys) gets overwritten.
Cc: stable@vger.kernel.org
Fixes: c9839143ebbf ("crypto: qat - Add DH support")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function qat_uclo_check_image_compat has an unsigned return type, but
returns a negative constant to indicate an error condition. So we change
unsigned to int.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove unnecessary line wrapping for the
adf_enable_vf2pf_interrupts() function, and harmonize pfvf_ops text.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change adf_gen4_enable_vf2pf_interrupts() to use a u32 variable,
consistently with both other GEN4 pfvf_ops and pfvf_ops of other
generations.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As a consequence of the refactored VF2PF interrupt handling logic, a
function that disables specific VF2PF interrupts is no longer needed.
Instead, a simpler function that disables all the interrupts, also
hiding the device specific amount of VFs to be disabled from the
pfvf_ops users, would be sufficient.
This patch replaces disable_vf2pf_interrupts() with the new
disable_all_vf2pf_interrupts(), which doesn't need any argument and
disables all the VF2PF interrupts.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace hard coded VF masks in adf_gen2_pfvf.c with the recently
introduced ADF_GEN2_VF_MSK.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the VF2PF interrupt handler in the PF ISR and the definition of
the internal PFVF API to correct the current implementation, which can
result in missed interrupts.
More specifically, current HW generations consider a write to the mask
register, regardless of the value, as an acknowledge of any pending
VF2PF interrupt. Therefore, if there is an interrupt between the source
register read and the mask register write, such interrupt will not be
delivered and silently acknowledged, resulting in a lost VF2PF message.
To work around the problem, rather than disabling specific interrupts,
disable all the interrupts and re-enable only the ones that we are not
serving (excluding the already disabled ones too). This will force any
other pending interrupt to be triggered and be serviced by a subsequent
ISR.
This new approach requires, however, changes to the interrupt related
pfvf_ops functions. In particular, get_vf2pf_sources() has now been
removed in favor of disable_pending_vf2pf_interrupts(), which not only
retrieves and returns the pending (and enabled) sources, but also
disables them.
As a consequence, introduce the adf_disable_pending_vf2pf_interrupts()
utility in place of adf_disable_vf2pf_interrupts_irq(), which is no
longer needed.
Cc: stable@vger.kernel.org
Fixes: 993161d ("crypto: qat - fix handling of VF to PF interrupts")
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
PFVF Block Message requests for CRC use 0-based values to indicate
amounts, which have to be remapped to 1-based values on the receiving
side.
This patch fixes one debug print which was however using the wire value.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove an unintentional extra space and improve the readability of a
PFVF related code comment.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Spurious PFVF interrupts can happen when either the ISR is invoked
without a valid source being set or, otherwise, when no interrupt bit
is set in the PFVF register containing the message.
The latter test was present for GEN2 devices but missing for GEN4, this
patch fills the gap.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
PFVF protocol version 0 is not a valid version, but PF drivers
currently would report any such version from VFs as compatible.
This patch adds an extra check for the invalid PFVF protocol
version 0.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
VF drivers are notified via PFVF of the VFs being disabled, but
such notification was not propagated within the VF driver.
Dispatch the ADF_EVENT_RESTARTING event by adding a missing call
to adf_dev_restarting_notify().
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Previously, the GEN4 host driver supported SR-IOV but had no working
implementation of the PFVF protocol to communicate with VF drivers.
Since all the host drivers for QAT devices now support both SR-IOV and
PFVF, remove the old and unnecessary checks to test PFVF support.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The functions adf_enable_pf2vf_interrupts(), adf_flush_vf_wq() and
adf_disable_pf2vf_interrupts() are not referenced when the driver is
compiled with CONFIG_PCI_IOV=n. This patch removes these unused stubs.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove unnecessary braces around a single statement in a for loop.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the driver starts the device, it enables all the necessary
interrupts. However interrupts associated to host rings are enabled by
default on all GEN2 devices (except for dh895x) even when SR-IOV is
active. Fix this behaviour by checking if data structures associated to
VFs have been allocated to determine whether to enable such interrupts
or not.
Since the logic for the fix is the same across GEN2 devices, replace
the function to be fixed (adf_enable_ints()) with a single one
(adf_gen2_enable_ints()) in the common GEN2 code in adf_gen2_hw_data.c.
Likewise, remove the unnecessary duplication of defines too.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The capability detection logic clears bits for the features that are
disabled in a certain SKU. For example, if the bit associate to
compression is not present in the LEGFUSE register, the correspondent
bit is cleared in the capability mask.
This change adds the compression capability to the mask as this was
missing in the commit that enhanced the capability detection logic.
Fixes: cfe4894eccdc ("crypto: qat - set COMPRESSION capability for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Set the CIPHER capability for QAT DH895XCC devices if the hardware supports
it. This is done if both the CIPHER and the AUTHENTICATION engines are
available on the device.
Fixes: ad1332aa67ec ("crypto: qat - add support for capability detection")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device
we care about. Replace iommu_present() with a more appropriate check.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Initialize fully the structures rts_map_msg containing the ring to
service map from the host.
This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
drivers/crypto/qat/qat_common/adf_pfvf_vf_msg.c:144:51: warning: missing field 'map' initializer [-Wmissing-field-initializers]
struct ring_to_svc_map_v1 rts_map_msg = { { 0 }, };
^
Fixes: e1b176af3d7e ("crypto: qat - exchange ring-to-service mappings over PFVF")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Initialize fully the structures cap_msg containing the device
capabilities from the host.
This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
drivers/crypto/qat/qat_common/adf_pfvf_vf_msg.c:99:44: warning: missing field 'ext_dc_caps' initializer [-Wmissing-field-initializers]
struct capabilities_v3 cap_msg = { { 0 }, };
^
Fixes: 851ed498dba1 ("crypto: qat - exchange device capabilities over PFVF")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function adf_gen4_get_vf2pf_sources() computes a mask which is
stored in a variable which is returned and not used.
Remove superfluous assignment of variable.
This is to fix the following warning when compiling the QAT driver
with clang scan-build:
drivers/crypto/qat/qat_common/adf_gen4_pfvf.c:46:9: warning: Although the value stored to 'sou' is used in the enclosing expression, the value is never actually read from 'sou' [deadcode.DeadStores]
return sou &= ~mask;
^ ~~~~~
Fixes: 5901b4af6e07 ("crypto: qat - fix access to PFVF interrupt registers for GEN4")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The implementations of aead and skcipher in the QAT driver do not
support properly requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set.
If the HW queue is full, the driver returns -EBUSY but does not enqueue
the request.
This can result in applications like dm-crypt waiting indefinitely for a
completion of a request that was never submitted to the hardware.
To avoid this problem, disable the registration of all crypto algorithms
in the QAT driver by setting the number of crypto instances to 0 at
configuration time.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for HW QAT Power Management (PM) feature.
This feature is enabled at init time (1) by sending an admin message to
the firmware, targeting the admin AE, that sets the idle time before
the device changes state and (2) by unmasking the PM source of interrupt
in ERRMSK2.
The interrupt handler is extended to handle a PM interrupt which
is triggered by HW when a PM transition occurs. In this case, the
driver responds acknowledging the transaction using the HOST_MSG
mailbox.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Co-developed-by: Marcinx Malinowski <marcinx.malinowski@intel.com>
Signed-off-by: Marcinx Malinowski <marcinx.malinowski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move error source related CSRs from 4xxx to the wider GEN4 header file.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In an effort to reduce the amount of workqueues, scattered across
the QAT driver, introduce the misc workqueue. This queue will be used
to handle bottom halves, Power Management and more in the future.
The function adf_misc_wq_queue_work() has been added to simplify
the enqueuing of jobs.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
While in this particular case it would not be a (critical) issue,
the pattern itself is bad and error prone in case the location
of the parameter is changed.
Don't cast parameter to unsigned long pointer in the bit operations.
Instead copy to a local variable on stack of a proper type and use.
Fixes: b4b7e67c917f ("crypto: qat - Intel(R) QAT ucode part of fw loader")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The logic that detects, enables and disables pfvf interrupts was
expecting a single CSR per VF. Instead, the source and mask register are
two registers with a bit per VF.
Due to this, the driver is reading and setting reserved CSRs and not
masking the correct source of interrupts.
Fix the access to the source and mask register for QAT GEN4 devices by
removing the outer loop in adf_gen4_get_vf2pf_sources(),
adf_gen4_enable_vf2pf_interrupts() and
adf_gen4_disable_vf2pf_interrupts() and changing the helper macros
ADF_4XXX_VM2PF_SOU and ADF_4XXX_VM2PF_MSK.
Fixes: a9dc0d966605 ("crypto: qat - add PFVF support to the GEN4 host driver")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Siming Wan <siming.wan@intel.com>
Signed-off-by: Siming Wan <siming.wan@intel.com>
Reviewed-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The "ret" variable needs to be signed or there is an error message which
will not be printed correctly.
Fixes: 0cec19c761e5 ("crypto: qat - add support for compression for 4xxx")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ring reset result values are defined starting from 0x1 instead of 0.
This causes out-of-tree drivers that support this message to understand
that a ring reset failed even if the operation was successful.
Fix by starting the definition of ring reset result values from 0.
Fixes: 0bba03ce9739 ("crypto: qat - add PFVF support to enable the reset of ring pairs")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reported-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the logic required to enable the compression service for 4xxx devices.
This allows to load the compression firmware image and report
the appropriate compression capabilities.
The firmware image selection for a given device is based on the
'ServicesEnabled' key stored in the internal configuration, which is
added statically at the probe of the device according to the following
rule, by default:
- odd numbered devices assigned to compression services
- even numbered devices assigned to crypto services
In addition, restore the 'ServicesEnabled' key, if present, when SRIOV
is enabled on the device.
Signed-off-by: Tomasz Kowalik <tomaszx.kowalik@intel.com>
Co-developed-by: Mateuszx Potrola <mateuszx.potrola@intel.com>
Signed-off-by: Mateuszx Potrola <mateuszx.potrola@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add logic to allow the detection of data compression capabilities for
4xxx devices.
The capability detection logic has been refactored to separate the
crypto capabilities from the compression ones.
This patch is not updating the returned capability mask as, up to now,
4xxx devices are configured only to handle crypto operations.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Extend support for resetting ring pairs on the device to VFs. Such
reset happens by sending a request to the PF over the PFVF protocol.
This patch defines two new PFVF messages and adds the PFVF logic for
handling the request on PF, triggering the reset, and VFs, accepting the
'success'/'error' response.
This feature is GEN4 specific.
This patch is based on earlier work done by Zelin Deng.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
So far PFVF support for GEN4 devices has been kept effectively disabled
due to lack of support. This patch adds all the GEN4 specific logic to
make PFVF fully functional on PF.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the configuration logic for the VF driver to leverage the
ring-to-service mappings now received via PFVF.
While the driver config logic is not yet capable of supporting
configurations other than the default mapping, make sure that both VF
and PF share the same default configuration in order to work properly.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In addition to retrieving the device capabilities, a VF may also need to
retrieve the mapping of its ring pairs to crypto and or compression
services in order to work properly.
Make the VF receive the ring-to-service mappings from the PF by means of a
new REQ_RING_SVC_MAP Block Message and add the request and response
logic on VF and PF respectively. This change requires to bump the PFVF
protocol to version 4.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The original design and current implementation of the PFVF protocol
expects the sender to both acquire and relinquish the ownership of the
shared CSR by setting and clearing the "in use" pattern on the remote
half of the register when sending a message. This happens regardless of
the acknowledgment of the reception, to guarantee changes, including
collisions, are surely detected.
However, in the case of a request that requires a response, collisions
can also be detected by the lack of a reply. This can be exploited to
speed up and simplify the above behaviour, letting the receiver both
acknowledge the message and release the CSR in a single transaction:
1) the sender can return as soon as the message has been acknowledged
2) the receiver doesn't have to wait long before acquiring ownership
of the CSR for the response message, greatly improving the overall
throughput.
Howerver, this improvement cannot be leveraged for fire-and-forget
notifications, as it would be impossible for the sender to clearly
distinguish between a collision and an ack immediately followed by a new
message.
This patch implements this optimization in a new version of the protocol
(v3), which applies the fast-ack logic only whenever possible and
guarantees backward compatibility with older versions. For requests, a
new retry loop guarantees a correct behaviour.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Allow the VF driver to get the supported device capabilities through PFVF,
by adding a new block message, the Capability Summary.
This messages allows to exchange the capability through masks, which
report, depending on the Capability Summary version, up to the following
information:
- algorithms and/or services that are supported by the device (e.g.
symmetric crypto, data compression, etc.)
- (extended) compression capabilities, with details about the compression
service (e.g. if compress and verify is supported by this device)
- the frequency of the device
This patch supports the latest Capabilities Summary version 3 for VFs,
but will limit support for the PF driver to version 2. This change also
increases the PFVF protocol to version 2.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
GEN2 devices use a single CSR for PFVF messages, which leaves up to 10 bits
of payload per single message. While such amount is sufficient for the
currently defined messages, the transfer of bigger and more complex data
streams from the PF to the VF requires a new mechanism that extends the
protocol.
This patch adds a new layer on top of the basic PFVF messaging, called
Block Messages, to encapsulate up to 126 bytes of data in a single
logical message across multiple PFVF messages of new types (SMALL,
MEDIUM and LARGE BLOCK), including (sub)types (BLKMSG_TYPE) to carry the
information about the actual Block Message.
Regardless of the size, each Block Message uses a two bytes header,
containing the version and size, to allow for extension while
maintaining compatibility. The size and the types of Block Messages are
defined as follow:
- small block messages: up to 16 BLKMSG types of up to 30 bytes
- medium block messages: up to 8 BLKMSG types of up to 62 bytes
- large block messages: up to 4 BLKMSG types of up to 126 bytes
It effectively works as reading a byte at a time from a block device and
for each of these new Block Messages:
- the requestor (always a VF) can either request a specific byte of the
larger message, in order to retrieve the full message, or request the
value of the CRC calculated for a specific message up to the provided
size (to allow for messages to grow while maintaining forward
compatibility)
- the responder (always the PF) will either return a single data or CRC
byte, along with the indication of response type (or error).
This patch provides the basic infrastructure to perform the above
operations, without defining any new message.
As CRCs are required, this code now depends on the CRC8 module.
Note: as a consequence of the Block Messages design, sending multiple
PFVF messages in bursts, the interrupt rate limiting values on the PF are
increased.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
