aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
26 hoursRevert "mm/secretmem: use refcount_t instead of atomic_t"HEADmasterLinus Torvalds
This reverts commit 110860541f443f950c1274f217a1a3e298670a33. Converting the "secretmem_users" counter to a refcount is incorrect, because a refcount is special in zero and can't just be incremented (but a count of users is not, and "no users" is actually perfectly valid and not a sign of a free'd resource). Reported-by: syzbot+75639e6a0331cd61d3e2@syzkaller.appspotmail.com Cc: Jordy Zomer <jordy@pwning.systems> Cc: Kees Cook <keescook@chromium.org>, Cc: Jordy Zomer <jordy@jordyzomer.github.io> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
26 hoursMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull autofs fix from Al Viro: "Fix for a braino of mine (in getting rid of open-coded dentry_path_raw() in autofs a couple of cycles ago). Mea culpa... Obvious -stable fodder" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: autofs: fix wait name hash calculation in autofs_wait()
29 hoursMerge tag 'sched_urgent_for_v5.15_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: "Reset clang's Shadow Call Stack on hotplug to prevent it from overflowing" * tag 'sched_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/scs: Reset the shadow stack when idle_task_exit
29 hoursMerge tag 'x86_urgent_for_v5.15_rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: "A single change adding Dave Hansen to our maintainers team" * tag 'x86_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add Dave Hansen to the x86 maintainer team
29 hoursMerge tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull ksmbd fixes from Steve French: "Ten fixes for the ksmbd kernel server, for improved security and additional buffer overflow checks: - a security improvement to session establishment to reduce the possibility of dictionary attacks - fix to ensure that maximum i/o size negotiated in the protocol is not less than 64K and not more than 8MB to better match expected behavior - fix for crediting (flow control) important to properly verify that sufficient credits are available for the requested operation - seven additional buffer overflow, buffer validation checks" * tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: add buffer validation in session setup ksmbd: throttle session setup failures to avoid dictionary attacks ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests ksmbd: validate credit charge after validating SMB2 PDU body size ksmbd: add buffer validation for smb direct ksmbd: limit read/write/trans buffer size not to exceed 8MB ksmbd: validate compound response buffer ksmbd: fix potencial 32bit overflow from data area check in smb2_write ksmbd: improve credits management ksmbd: add validation in smb2_ioctl
29 hoursMerge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten fixes, seven of which are in drivers. The core fixes are one to fix a potential crash on resume, one to sort out our reference count releases to avoid releasing in-use modules and one to adjust the cmd per lun calculation to avoid an overflow in hyper-v" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufs-pci: Force a full restore after suspend-to-disk scsi: qla2xxx: Fix unmap of already freed sgl scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() scsi: qla2xxx: Return -ENOMEM if kzalloc() fails scsi: sd: Fix crashes in sd_resume_runtime() scsi: mpi3mr: Fix duplicate device entries when scanning through sysfs scsi: core: Put LLD module refcnt after SCSI device is released scsi: storvsc: Fix validation for unsolicited incoming packets scsi: iscsi: Fix set_param() handling scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()
3 daysMerge tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Fix for the cgroup code not ussing irq safe stats updates, and one fix for an error handling condition in add_partition()" * tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-block: block: fix incorrect references to disk objects blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on blkg->iostat_cpu
3 daysMerge tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Two fixes for the max workers limit API that was introduced this series: one fix for an issue with that code, and one fixing a linked timeout regression in this series" * tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block: io_uring: apply worker limits to previous users io_uring: fix ltimeout unprep io_uring: apply max_workers limit to all future users io-wq: max_worker fixes
3 daysMerge tag 'fuse-fixes-5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Syzbot discovered a race in case of reusing the fuse sb (introduced in this cycle). Fix it by doing the s_fs_info initialization at the proper place" * tag 'fuse-fixes-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: clean up error exits in fuse_fill_super() fuse: always initialize sb->s_fs_info fuse: clean up fuse_mount destruction fuse: get rid of fuse_put_super() fuse: check s_root when destroying sb
3 daysMerge tag 'hyperv-fixes-signed-20211022' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyper-v fix from Wei Liu: - Fix vmbus ARM64 build (Arnd Bergmann) * tag 'hyperv-fixes-signed-20211022' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyperv/vmbus: include linux/bitops.h
3 dayshyperv/vmbus: include linux/bitops.hArnd Bergmann
On arm64 randconfig builds, hyperv sometimes fails with this error: In file included from drivers/hv/hv_trace.c:3: In file included from drivers/hv/hyperv_vmbus.h:16: In file included from arch/arm64/include/asm/sync_bitops.h:5: arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly In file included from include/asm-generic/bitops/hweight.h:5: include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration] include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration] Include the correct header first. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org>
3 daysMerge tag 'acpi-5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix two regressions, one related to ACPI power resources management and one that broke ACPI tools compilation. Specifics: - Stop turning off unused ACPI power resources in an unknown state to address a regression introduced during the 5.14 cycle (Rafael Wysocki). - Fix an ACPI tools build issue introduced recently when the minimal stdarg.h was added (Miguel Bernal Marin)" * tag 'acpi-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Do not turn off power resources in unknown state ACPI: tools: fix compilation error
3 daysMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more x86 kvm fixes from Paolo Bonzini: - Cache coherency fix for SEV live migration - Fix for instruction emulation with PKU - fixes for rare delaying of interrupt delivery - fix for SEV-ES buffer overflow * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SEV-ES: go over the sev_pio_data buffer in multiple passes if needed KVM: SEV-ES: keep INS functions together KVM: x86: remove unnecessary arguments from complete_emulator_pio_in KVM: x86: split the two parts of emulator_pio_in KVM: SEV-ES: clean up kvm_sev_es_ins/outs KVM: x86: leave vcpu->arch.pio.count alone in emulator_pio_in_out KVM: SEV-ES: rename guest_ins_data to sev_pio_data KVM: SEV: Flush cache on non-coherent systems before RECEIVE_UPDATE_DATA KVM: MMU: Reset mmu->pkru_mask to avoid stale data KVM: nVMX: promptly process interrupts delivered while in guest mode KVM: x86: check for interrupts before deciding whether to exit the fast path
3 daysMerge branch 'acpi-tools'Rafael J. Wysocki
Merge a fix for a recent ACPI tools bild regresson. * acpi-tools: ACPI: tools: fix compilation error
3 daysKVM: SEV-ES: go over the sev_pio_data buffer in multiple passes if neededPaolo Bonzini
The PIO scratch buffer is larger than a single page, and therefore it is not possible to copy it in a single step to vcpu->arch/pio_data. Bound each call to emulator_pio_in/out to a single page; keep track of how many I/O operations are left in vcpu->arch.sev_pio_count, so that the operation can be restarted in the complete_userspace_io callback. For OUT, this means that the previous kvm_sev_es_outs implementation becomes an iterator of the loop, and we can consume the sev_pio_data buffer before leaving to userspace. For IN, instead, consuming the buffer and decreasing sev_pio_count is always done in the complete_userspace_io callback, because that is when the memcpy is done into sev_pio_data. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reported-by: Felix Wilhelm <fwilhelm@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 daysKVM: SEV-ES: keep INS functions togetherPaolo Bonzini
Make the diff a little nicer when we actually get to fixing the bug. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 daysKVM: x86: remove unnecessary arguments from complete_emulator_pio_inPaolo Bonzini
complete_emulator_pio_in can expect that vcpu->arch.pio has been filled in, and therefore does not need the size and count arguments. This makes things nicer when the function is called directly from a complete_userspace_io callback. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 daysKVM: x86: split the two parts of emulator_pio_inPaolo Bonzini
emulator_pio_in handles both the case where the data is pending in vcpu->arch.pio.count, and the case where I/O has to be done via either an in-kernel device or a userspace exit. For SEV-ES we would like to split these, to identify clearly the moment at which the sev_pio_data is consumed. To this end, create two different functions: __emulator_pio_in fills in vcpu->arch.pio.count, while complete_emulator_pio_in clears it and releases vcpu->arch.pio.data. Because this patch has to be backported, things are left a bit messy. kernel_pio() operates on vcpu->arch.pio, which leads to emulator_pio_in() having with two calls to complete_emulator_pio_in(). It will be fixed in the next release. While at it, remove the unused void* val argument of emulator_pio_in_out. The function currently hardcodes vcpu->arch.pio_data as the source/destination buffer, which sucks but will be fixed after the more severe SEV-ES buffer overflow. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 daysKVM: SEV-ES: clean up kvm_sev_es_ins/outsPaolo Bonzini
A few very small cleanups to the functions, smushed together because the patch is already very small like this: - inline emulator_pio_in_emulated and emulator_pio_out_emulated, since we already have the vCPU - remove the data argument and pull setting vcpu->arch.sev_pio_data into the caller - remove unnecessary clearing of vcpu->arch.pio.count when emulation is done by the kernel (and therefore vcpu->arch.pio.count is already clear on exit from emulator_pio_in and emulator_pio_out). No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 daysKVM: x86: leave vcpu->arch.pio.count alone in emulator_pio_in_outPaolo Bonzini
Currently emulator_pio_in clears vcpu->arch.pio.count twice if emulator_pio_in_out performs kernel PIO. Move the clear into emulator_pio_out where it is actually necessary. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
3 daysKVM: SEV-ES: rename guest_ins_data to sev_pio_dataPaolo Bonzini
We will be using this field for OUTS emulation as well, in case the data that is pushed via OUTS spans more than one page. In that case, there will be a need to save the data pointer across exits to userspace. So, change the name to something that refers to any kind of PIO. Also spell out what it is used for, namely SEV-ES. No functional change intended. Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 daysMerge tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing too crazy at the end of the cycle, the kmb modesetting fixes are probably a bit large but it's not a major driver, and its fixing monitor doesn't turn on type problems. Otherwise it's just a few minor patches, one ast regression revert, an msm power stability fix. ast: - fix regression with connector detect msm: - fix power stability issue msxfb: - fix crash on unload panel: - sync fix kmb: - modesetting fixes" * tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm: Revert "drm/ast: Add detect function support" drm/kmb: Enable ADV bridge after modeset drm/kmb: Corrected typo in handle_lcd_irq drm/kmb: Disable change of plane parameters drm/kmb: Remove clearing DPHY regs drm/kmb: Limit supported mode to 1080p drm/kmb: Work around for higher system clock drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel drm: mxsfb: Fix NULL pointer dereference crash on unload drm/msm/devfreq: Restrict idle clamping to a618 for now
4 daysmemblock: exclude MEMBLOCK_NOMAP regions from kmemleakMike Rapoport
Vladimir Zapolskiy reports: Commit a7259df76702 ("memblock: make memblock_find_in_range method private") invokes a kernel panic while running kmemleak on OF platforms with nomaped regions: Unable to handle kernel paging request at virtual address fff000021e00000 [...] scan_block+0x64/0x170 scan_gray_list+0xe8/0x17c kmemleak_scan+0x270/0x514 kmemleak_write+0x34c/0x4ac The memory allocated from memblock is registered with kmemleak, but if it is marked MEMBLOCK_NOMAP it won't have linear map entries so an attempt to scan such areas will fault. Ideally, memblock_mark_nomap() would inform kmemleak to ignore MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces operating on physical addresses can use __va() conversion. Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP take care of informing kmemleak to ignore such memory. Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Tested-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 daysRevert "memblock: exclude NOMAP regions from kmemleak"Mike Rapoport
Commit 6e44bd6d34d6 ("memblock: exclude NOMAP regions from kmemleak") breaks boot on EFI systems with kmemleak and VM_DEBUG enabled: efi: Processing EFI memory map: efi: 0x000090000000-0x000091ffffff [Conventional| | | | | | | | | | |WB|WT|WC|UC] efi: 0x000092000000-0x0000928fffff [Runtime Data|RUN| | | | | | | | | |WB|WT|WC|UC] ------------[ cut here ]------------ kernel BUG at mm/kmemleak.c:1140! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc6-next-20211019+ #104 pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kmemleak_free_part_phys+0x64/0x8c lr : kmemleak_free_part_phys+0x38/0x8c sp : ffff800011eafbc0 x29: ffff800011eafbc0 x28: 1fffff7fffb41c0d x27: fffffbfffda0e068 x26: 0000000092000000 x25: 1ffff000023d5f94 x24: ffff800011ed84d0 x23: ffff800011ed84c0 x22: ffff800011ed83d8 x21: 0000000000900000 x20: ffff800011782000 x19: 0000000092000000 x18: ffff800011ee0730 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffff0000233252c x14: ffff800019a905a0 x13: 0000000000000001 x12: ffff7000023d5ed7 x11: 1ffff000023d5ed6 x10: ffff7000023d5ed6 x9 : dfff800000000000 x8 : ffff800011eaf6b7 x7 : 0000000000000001 x6 : ffff800011eaf6b0 x5 : 00008ffffdc2a12a x4 : ffff7000023d5ed7 x3 : 1ffff000023dbf99 x2 : 1ffff000022f0463 x1 : 0000000000000000 x0 : ffffffffffffffff Call trace: kmemleak_free_part_phys+0x64/0x8c memblock_mark_nomap+0x5c/0x78 reserve_regions+0x294/0x33c efi_init+0x2d0/0x490 setup_arch+0x80/0x138 start_kernel+0xa0/0x3ec __primary_switched+0xc0/0xc8 Code: 34000041 97d526e7 f9418e80 36000040 (d4210000) random: get_random_bytes called from print_oops_end_marker+0x34/0x80 with crng_init=0 ---[ end trace 0000000000000000 ]--- The crash happens because kmemleak_free_part_phys() tries to use __va() before memstart_addr is initialized and this triggers a VM_BUG_ON() in arch/arm64/include/asm/memory.h: Revert 6e44bd6d34d6 ("memblock: exclude NOMAP regions from kmemleak"), the issue it is fixing will be fixed differently. Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 daysMerge branch 'ucount-fixes-for-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ucounts fixes from Eric Biederman: "There has been one very hard to track down bug in the ucount code that we have been tracking since roughly v5.14 was released. Alex managed to find a reliable reproducer a few days ago and then I was able to instrument the code and figure out what the issue was. It turns out the sigqueue_alloc single atomic operation optimization did not play nicely with ucounts multiple level rlimits. It turned out that either sigqueue_alloc or sigqueue_free could be operating on multiple levels and trigger the conditions for the optimization on more than one level at the same time. To deal with that situation I have introduced inc_rlimit_get_ucounts and dec_rlimit_put_ucounts that just focuses on the optimization and the rlimit and ucount changes. While looking into the big bug I found I couple of other little issues so I am including those fixes here as well. When I have time I would very much like to dig into process ownership of the shared signal queue and see if we could pick a single owner for the entire queue so that all of the rlimits can count to that owner. That should entirely remove the need to call get_ucounts and put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult because Linux unlike POSIX supports setuid that works on a single thread" * 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring ucounts: Proper error handling in set_cred_ucounts ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds ucounts: Fix signal ucount refcounting
4 daysMerge tag 'net-5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and can. We'll have one more fix for a socket accounting regression, it's still getting polished. Otherwise things look fine. Current release - regressions: - revert "vrf: reset skb conntrack connection on VRF rcv", there are valid uses for previous behavior - can: m_can: fix iomap_read_fifo() and iomap_write_fifo() Current release - new code bugs: - mlx5: e-switch, return correct error code on group creation failure Previous releases - regressions: - sctp: fix transport encap_port update in sctp_vtag_verify - stmmac: fix E2E delay mechanism (in PTP timestamping) Previous releases - always broken: - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init - netfilter: ipvs: make global sysctl read-only in non-init netns - tcp: md5: fix selection between vrf and non-vrf keys - ipv6: count rx stats on the orig netdev when forwarding - bridge: mcast: use multicast_membership_interval for IGMPv3 - can: - j1939: fix UAF for rx_kref of j1939_priv abort sessions on receiving bad messages - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix return error on FC timeout on TX path - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited - hns3: schedule the polling again when allocation fails, prevent stalls - drivers: add missing of_node_put() when aborting for_each_available_child_of_node() - ptp: fix possible memory leak and UAF in ptp_clock_register() - e1000e: fix packet loss in burst mode on Tiger Lake and later - mlx5e: ipsec: fix more checksum offload issues" * tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) usbnet: sanity check for maxpacket net: enetc: make sure all traffic classes can send large frames net: enetc: fix ethtool counter name for PM0_TERR ptp: free 'vclock_index' in ptp_clock_release() sfc: Don't use netif_info before net_device setup sfc: Export fibre-specific supported link modes net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags net/mlx5e: IPsec: Fix a misuse of the software parser's fields net/mlx5e: Fix vlan data lost during suspend flow net/mlx5: E-switch, Return correct error code on group creation failure net/mlx5: Lag, change multipath and bonding to be mutually exclusive ice: Add missing E810 device ids igc: Update I226_K device ID e1000e: Fix packet loss on Tiger Lake and later e1000e: Separate TGP board type from SPT ptp: Fix possible memory leak in ptp_clock_register() net: stmmac: Fix E2E delay mechanism nfc: st95hf: Make spi remove() callback return zero net: hns3: disable sriov before unload hclge layer net: hns3: fix vf reset workqueue cannot exit ...
4 daysMerge tag 'powerpc-5.15-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a bug exposed by a previous fix, where running guests with certain SMT topologies could crash the host on Power8. - Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is enabled. Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider. * tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/smp: do not decrement idle task preempt count in CPU offline powerpc/idle: Don't corrupt back chain when going idle
4 daysRevert "drm/ast: Add detect function support"Kim Phillips
This reverts commit aae74ff9caa8de9a45ae2e46068c417817392a26, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Fixes: aae74ff9caa8 ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/ Cc: Ainux <ainux.wang@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: sterlingteng@gmail.com Cc: chenhuacai@kernel.org Cc: Chuck Lever III <chuck.lever@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Jon Grimm <jon.grimm@amd.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: linux-kernel <linux-kernel@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com
4 daysMerge tag 'drm-misc-fixes-2021-10-21-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc7: - Rebased, to remove vc4 patches. - Fix mxsfb crash on unload. - Use correct sync parameters for Feixin K101-IM2BYL02. - Assorted kmb modeset/atomic fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e66eaf89-b9b9-41f5-d0d2-dad7e59fabb5@linux.intel.com
4 daysMerge tag 'drm-msm-fixes-2021-10-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes One more fix for v5.15, to work around a power stability issue on a630 (and possibly others) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs1WPLthmd=ToDcEHm=u-7O38RAVJ2XwRoS8xPmC520vg@mail.gmail.com
4 daysio_uring: apply worker limits to previous usersPavel Begunkov
Another change to the API io-wq worker limitation API added in 5.15, apply the limit to all prior users that already registered a tctx. It may be confusing as it's now, in particular the change covers the following 2 cases: TASK1 | TASK2 _________________________________________________ ring = create() | | limit_iowq_workers() *not limited* | TASK1 | TASK2 _________________________________________________ ring = create() | | issue_requests() limit_iowq_workers() | | *not limited* A note on locking, it's safe to traverse ->tctx_list as we hold ->uring_lock, but do that after dropping sqd->lock to avoid possible problems. It's also safe to access tctx->io_wq there because tasks kill it only after removing themselves from tctx_list, see io_uring_cancel_generic() -> io_uring_clean_tctx() Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d6e09ecc3545e4dc56e43c906ee3d71b7ae21bed.1634818641.git.asml.silence@gmail.com Reviewed-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 daysKVM: SEV: Flush cache on non-coherent systems before RECEIVE_UPDATE_DATAMasahiro Kozuka
Flush the destination page before invoking RECEIVE_UPDATE_DATA, as the PSP encrypts the data with the guest's key when writing to guest memory. If the target memory was not previously encrypted, the cache may contain dirty, unecrypted data that will persist on non-coherent systems. Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command") Cc: stable@vger.kernel.org Cc: Peter Gonda <pgonda@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Masahiro Kozuka <masa.koz@kozuka.jp> [sean: converted bug report to changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210914210951.2994260-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 daysKVM: MMU: Reset mmu->pkru_mask to avoid stale dataChenyi Qiang
When updating mmu->pkru_mask, the value can only be added but it isn't reset in advance. This will make mmu->pkru_mask keep the stale data. Fix this issue. Fixes: 2d344105f57c ("KVM, pkeys: introduce pkru_mask to cache conditions") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20211021071022.1140-1-chenyi.qiang@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 daysusbnet: sanity check for maxpacketOliver Neukum
maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
4 daysnet: enetc: make sure all traffic classes can send large framesVladimir Oltean
The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn <richard.pearn@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
4 daysnet: enetc: fix ethtool counter name for PM0_TERRVladimir Oltean
There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
4 daysMAINTAINERS: Add Dave Hansen to the x86 maintainer teamThomas Gleixner
Dave is already listed as x86/mm maintainer, has a profund knowledge of the x86 architecture in general and a good taste in terms of kernel programming in general. Add him as a full x86 maintainer with all rights and duties. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/87zgr3flq7.ffs@tglx
4 daysptp: free 'vclock_index' in ptp_clock_release()Yang Yingliang
'vclock_index' is accessed from sysfs, it shouled be freed in release function, so move it from ptp_clock_unregister() to ptp_clock_release(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
4 dayssfc: Don't use netif_info before net_device setupErik Ekman
Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
4 dayssfc: Export fibre-specific supported link modesErik Ekman
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
4 daysMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter fixes for net: 1) Crash due to missing initialization of timer data in xt_IDLETIMER, from Juhee Kang. 2) NF_CONNTRACK_SECMARK should be bool in Kconfig, from Vegard Nossum. 3) Skip netdev events on netns removal, from Florian Westphal. 4) Add testcase to show port shadowing via UDP, also from Florian. 5) Remove pr_debug() code in ip6t_rt, this fixes a crash due to unsafe access to non-linear skbuff, from Xin Long. 6) Make net/ipv4/vs/debug_level read-only from non-init netns, from Antoine Tenart. 7) Remove bogus invocation to bash in selftests/netfilter/nft_flowtable.sh also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
4 daysMerge tag 'mlx5-fixes-2021-10-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2021-10-20 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
4 daysMerge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-20 This series contains updates to e1000e, igc, and ice drivers. Sasha fixes an issue with dropped packets on Tiger Lake platforms for e1000e and corrects a device ID for igc. Tony adds missing E810 device IDs for ice. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
5 daysdrm/kmb: Enable ADV bridge after modesetAnitha Chrisanthus
On KMB, ADV bridge must be programmed and powered on prior to MIPI DSI HW initialization. v2: changed to atomic_bridge_chain_enable (Sam) Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
5 daysdrm/kmb: Corrected typo in handle_lcd_irqAnitha Chrisanthus
Check for Overflow bits for layer3 in the irq handler. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-5-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
5 daysdrm/kmb: Disable change of plane parametersEdmund Dea
Due to HW limitations, KMB cannot change height, width, or pixel format after initial plane configuration. v2: removed memset disp_cfg as it is already zero. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
5 daysdrm/kmb: Remove clearing DPHY regsEdmund Dea
Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during DSI initialization since this was causing MIPI Rx reset. Rest of the writes are bitwise, so will not affect Mipi Rx side. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
5 daysdrm/kmb: Limit supported mode to 1080pAnitha Chrisanthus
KMB only supports single resolution(1080p), this commit checks for 1920x1080x60 or 1920x1080x59 in crtc_mode_valid. Also, modes with vfp < 4 are not supported in KMB display. This change prunes display modes with vfp < 4. v2: added vfp check Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
5 daysdrm/kmb: Work around for higher system clockAnitha Chrisanthus
Use a different value for system clock offset in the ppl/llp ratio calculations for clocks higher than 500 Mhz. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-1-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
5 daysdrm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panelDan Johansen
This adjusts sync values according to the datasheet Fixes: 1c243751c095 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel") Co-developed-by: Marius Gripsgard <marius@ubports.com> Signed-off-by: Dan Johansen <strit@manjaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>