diff options
Diffstat (limited to 'drivers/staging/rt2860/common')
20 files changed, 3755 insertions, 3193 deletions
diff --git a/drivers/staging/rt2860/common/2860_rtmp_init.c b/drivers/staging/rt2860/common/2860_rtmp_init.c index 546f304ec330..0bc0fb99d2e4 100644 --- a/drivers/staging/rt2860/common/2860_rtmp_init.c +++ b/drivers/staging/rt2860/common/2860_rtmp_init.c @@ -173,9 +173,6 @@ NDIS_STATUS RTMPAllocTxRxRingMemory( pTxD->SDPtr0 = BufBasePaLow; // advance to next ring descriptor address pTxD->DMADONE = 1; -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); -#endif RingBasePaLow += TXD_SIZE; RingBaseVa = (PUCHAR) RingBaseVa + TXD_SIZE; @@ -236,9 +233,6 @@ NDIS_STATUS RTMPAllocTxRxRingMemory( pTxD = (PTXD_STRUC) pAd->MgmtRing.Cell[index].AllocVa; pTxD->DMADONE = 1; -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); -#endif // no pre-allocated buffer required in MgmtRing for scatter-gather case } DBGPRINT(RT_DEBUG_TRACE, ("MGMT Ring: total %d entry allocated\n", index)); @@ -318,10 +312,6 @@ NDIS_STATUS RTMPAllocTxRxRingMemory( pRxD = (PRXD_STRUC) pAd->RxRing.Cell[index].AllocVa; pRxD->SDP0 = RTMP_GetPhysicalAddressLow(pDmaBuf->AllocPa); pRxD->DDONE = 0; - -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR)pRxD, TYPE_RXD); -#endif } DBGPRINT(RT_DEBUG_TRACE, ("Rx Ring: total %d entry allocated\n", index)); @@ -821,10 +811,6 @@ PNDIS_PACKET GetPacketFromRxRing( IN OUT UINT32 *pRxPending) { PRXD_STRUC pRxD; -#ifdef RT_BIG_ENDIAN - PRXD_STRUC pDestRxD; - RXD_STRUC RxD; -#endif PNDIS_PACKET pRxPacket = NULL; PNDIS_PACKET pNewPacket; PVOID AllocVa; @@ -853,15 +839,8 @@ PNDIS_PACKET GetPacketFromRxRing( } -#ifdef RT_BIG_ENDIAN - pDestRxD = (PRXD_STRUC) pAd->RxRing.Cell[pAd->RxRing.RxSwReadIdx].AllocVa; - RxD = *pDestRxD; - pRxD = &RxD; - RTMPDescriptorEndianChange((PUCHAR)pRxD, TYPE_RXD); -#else // Point to Rx indexed rx ring descriptor pRxD = (PRXD_STRUC) pAd->RxRing.Cell[pAd->RxRing.RxSwReadIdx].AllocVa; -#endif if (pRxD->DDONE == 0) { @@ -904,10 +883,6 @@ PNDIS_PACKET GetPacketFromRxRing( *pRxPending = *pRxPending - 1; // update rx descriptor and kick rx -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR)pRxD, TYPE_RXD); - WriteBackToDescriptor((PUCHAR)pDestRxD, (PUCHAR)pRxD, FALSE, TYPE_RXD); -#endif INC_RING_INDEX(pAd->RxRing.RxSwReadIdx, RX_RING_SIZE); pAd->RxRing.RxCpuIdx = (pAd->RxRing.RxSwReadIdx == 0) ? (RX_RING_SIZE-1) : (pAd->RxRing.RxSwReadIdx-1); diff --git a/drivers/staging/rt2860/common/action.c b/drivers/staging/rt2860/common/action.c index d6f530fb857f..a4d9fdc0736e 100644 --- a/drivers/staging/rt2860/common/action.c +++ b/drivers/staging/rt2860/common/action.c @@ -72,17 +72,12 @@ VOID ActionStateMachineInit( StateMachineSetAction(S, ACT_IDLE, MT2_PEER_QOS_CATE, (STATE_MACHINE_FUNC)PeerQOSAction); StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)ReservedAction); -#ifdef QOS_DLS_SUPPORT - StateMachineSetAction(S, ACT_IDLE, MT2_PEER_DLS_CATE, (STATE_MACHINE_FUNC)PeerDLSAction); -#endif // QOS_DLS_SUPPORT // -#ifdef DOT11_N_SUPPORT StateMachineSetAction(S, ACT_IDLE, MT2_PEER_BA_CATE, (STATE_MACHINE_FUNC)PeerBAAction); StateMachineSetAction(S, ACT_IDLE, MT2_PEER_HT_CATE, (STATE_MACHINE_FUNC)PeerHTAction); StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ADD_BA_CATE, (STATE_MACHINE_FUNC)MlmeADDBAAction); StateMachineSetAction(S, ACT_IDLE, MT2_MLME_ORI_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction); StateMachineSetAction(S, ACT_IDLE, MT2_MLME_REC_DELBA_CATE, (STATE_MACHINE_FUNC)MlmeDELBAAction); -#endif // DOT11_N_SUPPORT // StateMachineSetAction(S, ACT_IDLE, MT2_PEER_PUBLIC_CATE, (STATE_MACHINE_FUNC)PeerPublicAction); StateMachineSetAction(S, ACT_IDLE, MT2_PEER_RM_CATE, (STATE_MACHINE_FUNC)PeerRMAction); @@ -92,7 +87,6 @@ VOID ActionStateMachineInit( StateMachineSetAction(S, ACT_IDLE, MT2_ACT_INVALID, (STATE_MACHINE_FUNC)MlmeInvalidAction); } -#ifdef DOT11_N_SUPPORT VOID MlmeADDBAAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem) @@ -131,21 +125,12 @@ VOID MlmeADDBAAction( pBAEntry =&pAd->BATable.BAOriEntry[Idx]; } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (ADHOC_ON(pAd)) ActHeaderInit(pAd, &Frame.Hdr, pInfo->pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid); else -#ifdef QOS_DLS_SUPPORT - if (pAd->MacTab.Content[pInfo->Wcid].ValidAsDls) - ActHeaderInit(pAd, &Frame.Hdr, pInfo->pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid); - else -#endif // QOS_DLS_SUPPORT // ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pInfo->pAddr); - } -#endif // CONFIG_STA_SUPPORT // Frame.Category = CATEGORY_BA; Frame.Action = ADDBA_REQ; @@ -220,10 +205,8 @@ VOID MlmeDELBAAction( // SEND BAR (Send BAR to refresh peer reordering buffer.) Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID]; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress); -#endif // CONFIG_STA_SUPPORT // + + BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress); FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton. FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton. @@ -241,20 +224,14 @@ VOID MlmeDELBAAction( // SEND DELBA FRAME FrameLen = 0; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { if (ADHOC_ON(pAd)) ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress, pAd->CommonCfg.Bssid); else -#ifdef QOS_DLS_SUPPORT - if (pAd->MacTab.Content[pInfo->Wcid].ValidAsDls) - ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress, pAd->CommonCfg.Bssid); - else -#endif // QOS_DLS_SUPPORT // ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[pInfo->Wcid].Addr); } -#endif // CONFIG_STA_SUPPORT // + Frame.Category = CATEGORY_BA; Frame.Action = DELBA; Frame.DelbaParm.Initiator = pInfo->Initiator; @@ -271,7 +248,6 @@ VOID MlmeDELBAAction( DBGPRINT(RT_DEBUG_TRACE, ("BA - MlmeDELBAAction() . 3 DELBA sent. Initiator(%d)\n", pInfo->Initiator)); } } -#endif // DOT11_N_SUPPORT // VOID MlmeQOSAction( IN PRTMP_ADAPTER pAd, @@ -299,40 +275,6 @@ VOID PeerQOSAction( { } -#ifdef QOS_DLS_SUPPORT -VOID PeerDLSAction( - IN PRTMP_ADAPTER pAd, - IN MLME_QUEUE_ELEM *Elem) -{ - UCHAR Action = Elem->Msg[LENGTH_802_11+1]; - - switch(Action) - { - case ACTION_DLS_REQUEST: -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - PeerDlsReqAction(pAd, Elem); -#endif // CONFIG_STA_SUPPORT // - break; - - case ACTION_DLS_RESPONSE: -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - PeerDlsRspAction(pAd, Elem); -#endif // CONFIG_STA_SUPPORT // - break; - - case ACTION_DLS_TEARDOWN: -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - PeerDlsTearDownAction(pAd, Elem); -#endif // CONFIG_STA_SUPPORT // - break; - } -} -#endif // QOS_DLS_SUPPORT // - -#ifdef DOT11_N_SUPPORT VOID PeerBAAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem) @@ -353,320 +295,12 @@ VOID PeerBAAction( } } - -#ifdef DOT11N_DRAFT3 - -#ifdef CONFIG_STA_SUPPORT -VOID StaPublicAction( - IN PRTMP_ADAPTER pAd, - IN UCHAR Bss2040Coexist) -{ - BSS_2040_COEXIST_IE BssCoexist; - MLME_SCAN_REQ_STRUCT ScanReq; - - BssCoexist.word = Bss2040Coexist; - // AP asks Station to return a 20/40 BSS Coexistence mgmt frame. So we first starts a scan, then send back 20/40 BSS Coexistence mgmt frame - if ((BssCoexist.field.InfoReq == 1) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040))) - { - // Clear record first. After scan , will update those bit and send back to transmiter. - pAd->CommonCfg.BSSCoexist2040.field.InfoReq = 1; - pAd->CommonCfg.BSSCoexist2040.field.Intolerant40 = 0; - pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq = 0; - // Fill out stuff for scan request - ScanParmFill(pAd, &ScanReq, ZeroSsid, 0, BSS_ANY, SCAN_2040_BSS_COEXIST); - MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq); - pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN; - } -} - - -/* -Description : Build Intolerant Channel Rerpot from Trigger event table. -return : how many bytes copied. -*/ -ULONG BuildIntolerantChannelRep( - IN PRTMP_ADAPTER pAd, - IN PUCHAR pDest) -{ - ULONG FrameLen = 0; - ULONG ReadOffset = 0; - UCHAR i; - UCHAR LastRegClass = 0xff; - PUCHAR pLen; - - for ( i = 0;i < MAX_TRIGGER_EVENT;i++) - { - if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid == TRUE) - { - if (pAd->CommonCfg.TriggerEventTab.EventA[i].RegClass == LastRegClass) - { - *(pDest + ReadOffset) = (UCHAR)pAd->CommonCfg.TriggerEventTab.EventA[i].Channel; - *pLen++; - ReadOffset++; - FrameLen++; - } - else - { - *(pDest + ReadOffset) = IE_2040_BSS_INTOLERANT_REPORT; // IE - *(pDest + ReadOffset + 1) = 2; // Len = RegClass byte + channel byte. - pLen = pDest + ReadOffset + 1; - LastRegClass = pAd->CommonCfg.TriggerEventTab.EventA[i].RegClass; - *(pDest + ReadOffset + 2) = LastRegClass; // Len = RegClass byte + channel byte. - *(pDest + ReadOffset + 3) = (UCHAR)pAd->CommonCfg.TriggerEventTab.EventA[i].Channel; - FrameLen += 4; - ReadOffset += 4; - } - - } - } - return FrameLen; -} - - -/* -Description : Send 20/40 BSS Coexistence Action frame If one trigger event is triggered. -*/ -VOID Send2040CoexistAction( - IN PRTMP_ADAPTER pAd, - IN UCHAR Wcid, - IN BOOLEAN bAddIntolerantCha) -{ - PUCHAR pOutBuffer = NULL; - NDIS_STATUS NStatus; - FRAME_ACTION_HDR Frame; - ULONG FrameLen; - ULONG IntolerantChaRepLen; - - IntolerantChaRepLen = 0; - NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory - if(NStatus != NDIS_STATUS_SUCCESS) - { - DBGPRINT(RT_DEBUG_ERROR,("ACT - Send2040CoexistAction() allocate memory failed \n")); - return; - } - ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[Wcid].Addr, pAd->CommonCfg.Bssid); - Frame.Category = CATEGORY_PUBLIC; - Frame.Action = ACTION_BSS_2040_COEXIST; - - MakeOutgoingFrame(pOutBuffer, &FrameLen, - sizeof(FRAME_ACTION_HDR), &Frame, - END_OF_ARGS); - - *(pOutBuffer + FrameLen) = pAd->CommonCfg.BSSCoexist2040.word; - FrameLen++; - - if (bAddIntolerantCha == TRUE) - IntolerantChaRepLen = BuildIntolerantChannelRep(pAd, pOutBuffer + FrameLen); - - MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen + IntolerantChaRepLen); - DBGPRINT(RT_DEBUG_ERROR,("ACT - Send2040CoexistAction( BSSCoexist2040 = 0x%x ) \n", pAd->CommonCfg.BSSCoexist2040.word)); - -} - - -/* - ========================================================================== - Description: - After scan, Update 20/40 BSS Coexistence IE and send out. - According to 802.11n D3.03 11.14.10 - - Parameters: - ========================================================================== - */ -VOID Update2040CoexistFrameAndNotify( - IN PRTMP_ADAPTER pAd, - IN UCHAR Wcid, - IN BOOLEAN bAddIntolerantCha) -{ - BSS_2040_COEXIST_IE OldValue; - - OldValue.word = pAd->CommonCfg.BSSCoexist2040.word; - if ((pAd->CommonCfg.TriggerEventTab.EventANo > 0) || (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0)) - pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq = 1; - - // Need to check !!!! - // How STA will set Intolerant40 if implementation dependent. Now we don't set this bit first.!!!!! - // So Only check BSS20WidthReq change. - if (OldValue.field.BSS20WidthReq != pAd->CommonCfg.BSSCoexist2040.field.BSS20WidthReq) - { - Send2040CoexistAction(pAd, Wcid, bAddIntolerantCha); - } -} -#endif // CONFIG_STA_SUPPORT // - - -BOOLEAN ChannelSwitchSanityCheck( - IN PRTMP_ADAPTER pAd, - IN UCHAR Wcid, - IN UCHAR NewChannel, - IN UCHAR Secondary) -{ - UCHAR i; - - if (Wcid >= MAX_LEN_OF_MAC_TABLE) - return FALSE; - - if ((NewChannel > 7) && (Secondary == 1)) - return FALSE; - - if ((NewChannel < 5) && (Secondary == 3)) - return FALSE; - - // 0. Check if new channel is in the channellist. - for (i = 0;i < pAd->ChannelListNum;i++) - { - if (pAd->ChannelList[i].Channel == NewChannel) - { - break; - } - } - - if (i == pAd->ChannelListNum) - return FALSE; - - return TRUE; -} - - -VOID ChannelSwitchAction( - IN PRTMP_ADAPTER pAd, - IN UCHAR Wcid, - IN UCHAR NewChannel, - IN UCHAR Secondary) -{ - UCHAR BBPValue = 0; - ULONG MACValue; - - DBGPRINT(RT_DEBUG_TRACE,("SPECTRUM - ChannelSwitchAction(NewChannel = %d , Secondary = %d) \n", NewChannel, Secondary)); - - if (ChannelSwitchSanityCheck(pAd, Wcid, NewChannel, Secondary) == FALSE) - return; - - // 1. Switches to BW = 20. - if (Secondary == 0) - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); - BBPValue&= (~0x18); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); - if (pAd->MACVersion == 0x28600100) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11); - DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); - } - pAd->CommonCfg.BBPCurrentBW = BW_20; - pAd->CommonCfg.Channel = NewChannel; - pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel; - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel,FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - pAd->MacTab.Content[Wcid].HTPhyMode.field.BW = 0; - DBGPRINT(RT_DEBUG_TRACE, ("!!!20MHz !!! \n" )); - } - // 1. Switches to BW = 40 And Station supports BW = 40. - else if (((Secondary == 1) || (Secondary == 3)) && (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == 1)) - { - pAd->CommonCfg.Channel = NewChannel; - - if (Secondary == 1) - { - // Secondary above. - pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2; - RTMP_IO_READ32(pAd, TX_BAND_CFG, &MACValue); - MACValue &= 0xfe; - RTMP_IO_WRITE32(pAd, TX_BAND_CFG, MACValue); - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); - BBPValue&= (~0x18); - BBPValue|= (0x10); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPValue); - BBPValue&= (~0x20); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPValue); - DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel )); - } - else - { - // Secondary below. - pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2; - RTMP_IO_READ32(pAd, TX_BAND_CFG, &MACValue); - MACValue &= 0xfe; - MACValue |= 0x1; - RTMP_IO_WRITE32(pAd, TX_BAND_CFG, MACValue); - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); - BBPValue&= (~0x18); - BBPValue|= (0x10); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPValue); - BBPValue&= (~0x20); - BBPValue|= (0x20); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPValue); - DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel )); - } - pAd->CommonCfg.BBPCurrentBW = BW_40; - AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); - pAd->MacTab.Content[Wcid].HTPhyMode.field.BW = 1; - } -} -#endif // DOT11N_DRAFT3 // -#endif // DOT11_N_SUPPORT // - VOID PeerPublicAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem) { -#ifdef DOT11N_DRAFT3 - UCHAR Action = Elem->Msg[LENGTH_802_11+1]; -#endif // DOT11N_DRAFT3 // - if (Elem->Wcid >= MAX_LEN_OF_MAC_TABLE) return; - -#ifdef DOT11N_DRAFT3 - switch(Action) - { - case ACTION_BSS_2040_COEXIST: // Format defined in IEEE 7.4.7a.1 in 11n Draf3.03 - { - //UCHAR BssCoexist; - BSS_2040_COEXIST_ELEMENT *pCoexistInfo; - BSS_2040_COEXIST_IE *pBssCoexistIe; - BSS_2040_INTOLERANT_CH_REPORT *pIntolerantReport = NULL; - - if (Elem->MsgLen <= (LENGTH_802_11 + sizeof(BSS_2040_COEXIST_ELEMENT)) ) - { - DBGPRINT(RT_DEBUG_ERROR, ("ACTION - 20/40 BSS Coexistence Management Frame length too short! len = %ld!\n", Elem->MsgLen)); - break; - } - DBGPRINT(RT_DEBUG_TRACE, ("ACTION - 20/40 BSS Coexistence Management action----> \n")); - hex_dump("CoexistenceMgmtFrame", Elem->Msg, Elem->MsgLen); - - - pCoexistInfo = (BSS_2040_COEXIST_ELEMENT *) &Elem->Msg[LENGTH_802_11+2]; - //hex_dump("CoexistInfo", (PUCHAR)pCoexistInfo, sizeof(BSS_2040_COEXIST_ELEMENT)); - if (Elem->MsgLen >= (LENGTH_802_11 + sizeof(BSS_2040_COEXIST_ELEMENT) + sizeof(BSS_2040_INTOLERANT_CH_REPORT))) - { - pIntolerantReport = (BSS_2040_INTOLERANT_CH_REPORT *)((PUCHAR)pCoexistInfo + sizeof(BSS_2040_COEXIST_ELEMENT)); - } - //hex_dump("IntolerantReport ", (PUCHAR)pIntolerantReport, sizeof(BSS_2040_INTOLERANT_CH_REPORT)); - - pBssCoexistIe = (BSS_2040_COEXIST_IE *)(&pCoexistInfo->BssCoexistIe); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (INFRA_ON(pAd)) - { - StaPublicAction(pAd, pCoexistInfo); - } - } -#endif // CONFIG_STA_SUPPORT // - - } - break; - } - -#endif // DOT11N_DRAFT3 // - } @@ -694,7 +328,6 @@ VOID PeerRMAction( return; } -#ifdef DOT11_N_SUPPORT static VOID respond_ht_information_exchange_action( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem) @@ -721,15 +354,12 @@ static VOID respond_ht_information_exchange_action( NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO)); // 2-1. Prepare ADDBA Response frame. -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (ADHOC_ON(pAd)) ActHeaderInit(pAd, &HTINFOframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid); else ActHeaderInit(pAd, &HTINFOframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr); } -#endif // CONFIG_STA_SUPPORT // HTINFOframe.Category = CATEGORY_HT; HTINFOframe.Action = HT_INFO_EXCHANGE; @@ -745,51 +375,6 @@ static VOID respond_ht_information_exchange_action( MlmeFreeMemory(pAd, pOutBuffer); } - -#ifdef DOT11N_DRAFT3 -VOID SendNotifyBWActionFrame( - IN PRTMP_ADAPTER pAd, - IN UCHAR Wcid, - IN UCHAR apidx) -{ - PUCHAR pOutBuffer = NULL; - NDIS_STATUS NStatus; - FRAME_ACTION_HDR Frame; - ULONG FrameLen; - PUCHAR pAddr1; - - - NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory - if(NStatus != NDIS_STATUS_SUCCESS) - { - DBGPRINT(RT_DEBUG_ERROR,("ACT - SendNotifyBWAction() allocate memory failed \n")); - return; - } - - if (Wcid == MCAST_WCID) - pAddr1 = &BROADCAST_ADDR[0]; - else - pAddr1 = pAd->MacTab.Content[Wcid].Addr; - ActHeaderInit(pAd, &Frame.Hdr, pAddr1, pAd->ApCfg.MBSSID[apidx].Bssid, pAd->ApCfg.MBSSID[apidx].Bssid); - - Frame.Category = CATEGORY_HT; - Frame.Action = NOTIFY_BW_ACTION; - - MakeOutgoingFrame(pOutBuffer, &FrameLen, - sizeof(FRAME_ACTION_HDR), &Frame, - END_OF_ARGS); - - *(pOutBuffer + FrameLen) = pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth; - FrameLen++; - - - MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen); - DBGPRINT(RT_DEBUG_TRACE,("ACT - SendNotifyBWAction(NotifyBW= %d)!\n", pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth)); - -} -#endif // DOT11N_DRAFT3 // - - VOID PeerHTAction( IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM *Elem) @@ -803,7 +388,7 @@ VOID PeerHTAction( { case NOTIFY_BW_ACTION: DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Notify Channel bandwidth action----> \n")); -#ifdef CONFIG_STA_SUPPORT + if(pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) { // Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps @@ -813,7 +398,6 @@ VOID PeerHTAction( Elem->Msg[LENGTH_802_11+2] )); break; } -#endif // CONFIG_STA_SUPPORT // if (Elem->Msg[LENGTH_802_11+2] == 0) // 7.4.8.2. if value is 1, keep the same as supported channel bandwidth. pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0; @@ -881,11 +465,6 @@ VOID ORIBATimerTimeout( INT i, total; UCHAR TID; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - total = pAd->MacTab.Size * NUM_OF_TID; for (i = 1; ((i <MAX_LEN_OF_BA_ORI_TABLE) && (total > 0)) ; i++) @@ -938,10 +517,8 @@ VOID SendRefreshBAR( } Sequence = pEntry->TxSeq[TID]; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress); -#endif // CONFIG_STA_SUPPORT // + + BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress); FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function. FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton. @@ -950,15 +527,20 @@ VOID SendRefreshBAR( MakeOutgoingFrame(pOutBuffer, &FrameLen, sizeof(FRAME_BAR), &FrameBar, END_OF_ARGS); + if (1) // Now we always send BAR. { +#ifndef RT30xx MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen); +#endif +#ifdef RT30xx + MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen); +#endif } MlmeFreeMemory(pAd, pOutBuffer); } } } -#endif // DOT11_N_SUPPORT // VOID ActHeaderInit( IN PRTMP_ADAPTER pAd, diff --git a/drivers/staging/rt2860/common/action.h b/drivers/staging/rt2860/common/action.h index ce3877dce81b..cfc2a5f8d1aa 100644 --- a/drivers/staging/rt2860/common/action.h +++ b/drivers/staging/rt2860/common/action.h @@ -41,17 +41,10 @@ typedef struct PACKED __HT_INFO_OCTET { -#ifdef RT_BIG_ENDIAN - UCHAR Reserved:5; - UCHAR STA_Channel_Width:1; - UCHAR Forty_MHz_Intolerant:1; - UCHAR Request:1; -#else UCHAR Request:1; UCHAR Forty_MHz_Intolerant:1; UCHAR STA_Channel_Width:1; UCHAR Reserved:5; -#endif } HT_INFORMATION_OCTET; diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c index 591d1e2158da..b95a341caacd 100644 --- a/drivers/staging/rt2860/common/ba_action.c +++ b/drivers/staging/rt2860/common/ba_action.c @@ -25,8 +25,6 @@ ************************************************************************* */ -#ifdef DOT11_N_SUPPORT - #include "../rt_config.h" @@ -132,10 +130,7 @@ void Announce_Reordering_Packet(IN PRTMP_ADAPTER pAd, // pass this 802.3 packet to upper layer or forward this packet to WM directly // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket)); -#endif // CONFIG_STA_SUPPORT // + ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket)); } } @@ -449,9 +444,6 @@ void ba_flush_reordering_timeout_mpdus( && (pBAEntry->list.qlen > 0) ) { -// printk("timeout[%d] (%lx-%lx = %d > %d): %x, ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer), -// (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), REORDERING_PACKET_TIMEOUT, -// pBAEntry->LastIndSeq); // // force LastIndSeq to shift to LastIndSeq+1 // @@ -468,22 +460,7 @@ void ba_flush_reordering_timeout_mpdus( pBAEntry->LastIndSeq = Sequence; } - //printk("%x, flush one!\n", pBAEntry->LastIndSeq); - } -#if 0 - else if ( - (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(MAX_REORDERING_PACKET_TIMEOUT))) && - (pBAEntry->list.qlen > 1)) - ) - { - DBGPRINT(RT_DEBUG_TRACE,("timeout[%d] (%lx-%lx = %d > %d): %x\n ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer), - (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), MAX_REORDERING_PACKET_TIMEOUT, - pBAEntry->LastIndSeq)); - ba_refresh_reordering_mpdus(pAd, pBAEntry); - pBAEntry->LastIndSeqAtTimer = Now32; - } -#endif } @@ -554,6 +531,13 @@ VOID BAOriSessionSetUp( pBAEntry->TimeOutValue = TimeOut; pBAEntry->pAdapter = pAd; +#ifdef RT30xx + DBGPRINT(RT_DEBUG_TRACE,("Send AddBA to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d isForced:%d Wcid:%d\n" + ,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2] + ,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5] + ,TID,isForced,pEntry->Aid)); +#endif + if (!(pEntry->TXBAbitmap & (1<<TID))) { RTMPInitTimer(pAd, &pBAEntry->ORIBATimer, GET_TIMER_FUNCTION(BAOriSessionSetupTimeout), pBAEntry, FALSE); @@ -610,11 +594,7 @@ VOID BAOriSessionAdd( return; } - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress); -#endif // CONFIG_STA_SUPPORT // + BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress); FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function. FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton. @@ -701,10 +681,6 @@ BOOLEAN BARecSessionAdd( RTMPInitTimer(pAd, &pBAEntry->RECBATimer, GET_TIMER_FUNCTION(BARecSessionIdleTimeout), pBAEntry, TRUE); } -#if 0 // for debugging - RTMPSetTimer(&pBAEntry->RECBATimer, REC_BA_SESSION_IDLE_TIMEOUT); -#endif - // Set Bitmap flag. pEntry->RXBAbitmap |= (1<<TID); pEntry->BARecWcidArray[TID] = Idx; @@ -1083,20 +1059,9 @@ VOID BAOriSessionSetupTimeout( pAd = pBAEntry->pAdapter; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // Do nothing if monitor mode is on - if (MONITOR_ON(pAd)) - return; - } -#endif // CONFIG_STA_SUPPORT // - -#ifdef RALINK_ATE - // Nothing to do in ATE mode. - if (ATE_ON(pAd)) + // Do nothing if monitor mode is on + if (MONITOR_ON(pAd)) return; -#endif // RALINK_ATE // pEntry = &pAd->MacTab.Content[pBAEntry->Wcid]; @@ -1113,8 +1078,16 @@ VOID BAOriSessionSetupTimeout( AddbaReq.Token = pBAEntry->Token; MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE, sizeof(MLME_ADDBA_REQ_STRUCT), (PVOID)&AddbaReq); RT28XX_MLME_HANDLER(pAd); +#ifndef RT30xx DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) : Send ADD BA again\n", pBAEntry->Token)); - +#endif +#ifdef RT30xx + DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d Wcid:%d\n" + ,pBAEntry->Token + ,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2] + ,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5] + ,pBAEntry->TID,pEntry->Aid)); +#endif pBAEntry->Token++; RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT); } @@ -1229,21 +1202,15 @@ VOID PeerAddBAReqAction( } NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP)); + // 2-1. Prepare ADDBA Response frame. -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (ADHOC_ON(pAd)) ActHeaderInit(pAd, &ADDframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid); else -#ifdef QOS_DLS_SUPPORT - if (pAd->MacTab.Content[Elem->Wcid].ValidAsDls) - ActHeaderInit(pAd, &ADDframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid); - else -#endif // QOS_DLS_SUPPORT // ActHeaderInit(pAd, &ADDframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr); } -#endif // CONFIG_STA_SUPPORT // + ADDframe.Category = CATEGORY_BA; ADDframe.Action = ADDBA_RESP; ADDframe.Token = pAddreqFrame->Token; @@ -1310,9 +1277,7 @@ VOID PeerAddBARspAction( } // Rcv Decline StatusCode if ((pFrame->StatusCode == 37) -#ifdef CONFIG_STA_SUPPORT || ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd) && (pFrame->StatusCode != 0)) -#endif // CONFIG_STA_SUPPORT // ) { pAd->MacTab.Content[Elem->Wcid].BADeclineBitmap |= 1<<pFrame->BaParm.TID; @@ -1426,6 +1391,10 @@ VOID SendPSMPAction( //ULONG Idx; FRAME_PSMP_ACTION Frame; ULONG FrameLen; +#ifdef RT30xx + UCHAR bbpdata=0; + UINT32 macdata; +#endif // RT30xx // NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory if (NStatus != NDIS_STATUS_SUCCESS) @@ -1433,22 +1402,62 @@ VOID SendPSMPAction( DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n")); return; } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr); -#endif // CONFIG_STA_SUPPORT // + + ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr); Frame.Category = CATEGORY_HT; Frame.Action = SMPS_ACTION; switch (Psmp) { case MMPS_ENABLE: +#ifdef RT30xx + if (IS_RT3090(pAd)) + { + // disable MMPS BBP control register + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata); + bbpdata &= ~(0x04); //bit 2 + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata); + + // disable MMPS MAC control register + RTMP_IO_READ32(pAd, 0x1210, &macdata); + macdata &= ~(0x09); //bit 0, 3 + RTMP_IO_WRITE32(pAd, 0x1210, macdata); + } +#endif // RT30xx // Frame.Psmp = 0; break; case MMPS_DYNAMIC: +#ifdef RT30xx + if (IS_RT3090(pAd)) + { + // enable MMPS BBP control register + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata); + bbpdata |= 0x04; //bit 2 + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata); + + // enable MMPS MAC control register + RTMP_IO_READ32(pAd, 0x1210, &macdata); + macdata |= 0x09; //bit 0, 3 + RTMP_IO_WRITE32(pAd, 0x1210, macdata); + } +#endif // RT30xx // Frame.Psmp = 3; break; case MMPS_STATIC: +#ifdef RT30xx + if (IS_RT3090(pAd)) + { + // enable MMPS BBP control register + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata); + bbpdata |= 0x04; //bit 2 + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata); + + // enable MMPS MAC control register + RTMP_IO_READ32(pAd, 0x1210, &macdata); + macdata |= 0x09; //bit 0, 3 + RTMP_IO_WRITE32(pAd, 0x1210, macdata); + } +#endif // RT30xx // Frame.Psmp = 1; break; } @@ -1501,10 +1510,7 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet( // a. pointer pRxBlk->pData to payload // b. modify pRxBlk->DataSize -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3); -#endif // CONFIG_STA_SUPPORT // + RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3); ASSERT(pRxBlk->pRxPacket); pRxPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket); @@ -1519,18 +1525,9 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet( // if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { #ifdef LINUX - NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3); -#endif -#ifdef UCOS - NdisMoveMemory(net_pkt_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3); + NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3); #endif - } -#endif // CONFIG_STA_SUPPORT // } } @@ -1598,13 +1595,9 @@ static VOID ba_enqueue_reordering_packet( } else { -#if 0 - DBGPRINT(RT_DEBUG_ERROR, ("!!! (%d:%d) Can't allocate reordering mpdu blk\n", - blk_count, pBAEntry->list.qlen)); -#else DBGPRINT(RT_DEBUG_ERROR, ("!!! (%d) Can't allocate reordering mpdu blk\n", pBAEntry->list.qlen)); -#endif + /* * flush all pending reordering mpdus * and receving mpdu to upper layer @@ -1652,29 +1645,11 @@ VOID Indicate_AMPDU_Packet( if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU) && (pRxBlk->DataSize > MAX_RX_PKT_LEN)) { -#if 0 // sample take off, no use - static int err_size; - - err_size++; - if (err_size > 20) { - printk("AMPDU DataSize = %d\n", pRxBlk->DataSize); - hex_dump("802.11 Header", (UCHAR *)pRxBlk->pHeader, 24); - hex_dump("Payload", pRxBlk->pData, 64); - err_size = 0; - } -#endif // release packet RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE); return; } - -#if 0 // test - /* Rec BA Session had been torn down */ - INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID); - return; -#endif - if (Wcid < MAX_LEN_OF_MAC_TABLE) { Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID]; @@ -1769,10 +1744,6 @@ VOID Indicate_AMPDU_Packet( // else { -#if 0 - ba_refresh_reordering_mpdus(pAd, pBAEntry); - INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID); -#else LONG WinStartSeq, TmpSeq; @@ -1794,9 +1765,5 @@ VOID Indicate_AMPDU_Packet( { pBAEntry->LastIndSeq = TmpSeq; } -#endif } } - -#endif // DOT11_N_SUPPORT // - diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c index b3f88f52af7c..66eca202eae4 100644 --- a/drivers/staging/rt2860/common/cmm_data.c +++ b/drivers/staging/rt2860/common/cmm_data.c @@ -105,7 +105,9 @@ NDIS_STATUS MiniportMMRequest( PNDIS_PACKET pPacket; NDIS_STATUS Status = NDIS_STATUS_SUCCESS; ULONG FreeNum; +#ifdef RT2860 unsigned long IrqFlags = 0; +#endif UCHAR IrqState; UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN]; @@ -117,9 +119,10 @@ NDIS_STATUS MiniportMMRequest( IrqState = pAd->irq_disabled; +#ifdef RT2860 if ((pAd->MACVersion == 0x28600100) && (!IrqState)) RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags); - +#endif do { // Reset is in progress, stop immediately @@ -172,14 +175,15 @@ NDIS_STATUS MiniportMMRequest( } while (FALSE); +#ifdef RT2860 // 2860C use Tx Ring if ((pAd->MACVersion == 0x28600100) && (!IrqState)) RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags); - +#endif return Status; } - +#ifdef RT2860 NDIS_STATUS MiniportMMRequestUnlock( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx, @@ -247,7 +251,115 @@ NDIS_STATUS MiniportMMRequestUnlock( return Status; } +#endif +#ifdef RT30xx +NDIS_STATUS MlmeDataHardTransmit( + IN PRTMP_ADAPTER pAd, + IN UCHAR QueIdx, + IN PNDIS_PACKET pPacket); + +#define MAX_DATAMM_RETRY 3 +/* + ======================================================================== + + Routine Description: + API for MLME to transmit management frame to AP (BSS Mode) + or station (IBSS Mode) + + Arguments: + pAd Pointer to our adapter + pData Pointer to the outgoing 802.11 frame + Length Size of outgoing management frame + + Return Value: + NDIS_STATUS_FAILURE + NDIS_STATUS_PENDING + NDIS_STATUS_SUCCESS + + IRQL = PASSIVE_LEVEL + IRQL = DISPATCH_LEVEL + + Note: + + ======================================================================== +*/ +NDIS_STATUS MiniportDataMMRequest( + IN PRTMP_ADAPTER pAd, + IN UCHAR QueIdx, + IN PUCHAR pData, + IN UINT Length) +{ + PNDIS_PACKET pPacket; + NDIS_STATUS Status = NDIS_STATUS_SUCCESS; + ULONG FreeNum; + int retry = 0; + UCHAR IrqState; + UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN]; + + ASSERT(Length <= MGMT_DMA_BUFFER_SIZE); + + // 2860C use Tx Ring + IrqState = pAd->irq_disabled; + + do + { + // Reset is in progress, stop immediately + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) || + RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)|| + !RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP)) + { + Status = NDIS_STATUS_FAILURE; + break; + } + + // Check Free priority queue + // Since we use PBF Queue2 for management frame. Its corresponding DMA ring should be using TxRing. + + // 2860C use Tx Ring + + // free Tx(QueIdx) resources + FreeNum = GET_TXRING_FREENO(pAd, QueIdx); + + if ((FreeNum > 0)) + { + // We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870 + NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE)); + Status = RTMPAllocateNdisPacket(pAd, &pPacket, (PUCHAR)&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE), pData, Length); + if (Status != NDIS_STATUS_SUCCESS) + { + DBGPRINT(RT_DEBUG_WARN, ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n")); + break; + } + + //pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK; + //pAd->CommonCfg.MlmeRate = RATE_2; + + + Status = MlmeDataHardTransmit(pAd, QueIdx, pPacket); + if (Status != NDIS_STATUS_SUCCESS) + RTMPFreeNdisPacket(pAd, pPacket); + retry = MAX_DATAMM_RETRY; + } + else + { + retry ++; + + printk("retry %d\n", retry); + pAd->RalinkCounters.MgmtRingFullCount++; + if (retry >= MAX_DATAMM_RETRY) + { + DBGPRINT(RT_DEBUG_ERROR, ("Qidx(%d), not enough space in DataRing, MgmtRingFullCount=%ld!\n", + QueIdx, pAd->RalinkCounters.MgmtRingFullCount)); + } + } + + } while (retry < MAX_DATAMM_RETRY); + + + return Status; +} +#endif /* RT30xx */ /* ======================================================================== @@ -283,14 +395,16 @@ NDIS_STATUS MlmeHardTransmit( return NDIS_STATUS_FAILURE; } +#ifdef RT2860 if ( pAd->MACVersion == 0x28600100 ) return MlmeHardTransmitTxRing(pAd,QueIdx,pPacket); else +#endif return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket); } - +#ifdef RT2860 NDIS_STATUS MlmeHardTransmitTxRing( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx, @@ -300,10 +414,6 @@ NDIS_STATUS MlmeHardTransmitTxRing( PUCHAR pSrcBufVA; UINT SrcBufLen; PTXD_STRUC pTxD; -#ifdef RT_BIG_ENDIAN - PTXD_STRUC pDestTxD; - TXD_STRUC TxD; -#endif PHEADER_802_11 pHeader_802_11; BOOLEAN bAckRequired, bInsertTimestamp; ULONG SrcBufPA; @@ -335,14 +445,7 @@ NDIS_STATUS MlmeHardTransmitTxRing( SwIdx = pAd->TxRing[QueIdx].TxCpuIdx; -#ifndef RT_BIG_ENDIAN pTxD = (PTXD_STRUC) pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa; -#else - pDestTxD = (PTXD_STRUC)pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa; - TxD = *pDestTxD; - pTxD = &TxD; - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); -#endif if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket) { @@ -350,15 +453,10 @@ NDIS_STATUS MlmeHardTransmitTxRing( return NDIS_STATUS_FAILURE; } + // outgoing frame always wakeup PHY to prevent frame lost + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) + AsicForceWakeup(pAd, FROM_TX); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // outgoing frame always wakeup PHY to prevent frame lost - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - AsicForceWakeup(pAd, FROM_TX); - } -#endif // CONFIG_STA_SUPPORT // pFirstTxWI =(PTXWI_STRUC)pSrcBufVA; pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXWI_SIZE); @@ -388,7 +486,7 @@ NDIS_STATUS MlmeHardTransmitTxRing( // // // In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame -#ifdef CONFIG_STA_SUPPORT + // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD if (pHeader_802_11->FC.Type != BTYPE_DATA) { @@ -401,7 +499,6 @@ NDIS_STATUS MlmeHardTransmitTxRing( pHeader_802_11->FC.PwrMgmt = pAd->CommonCfg.bAPSDForcePowerSave; } } -#endif // CONFIG_STA_SUPPORT // bInsertTimestamp = FALSE; if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL @@ -438,9 +535,6 @@ NDIS_STATUS MlmeHardTransmitTxRing( return (NDIS_STATUS_FAILURE); } -#ifdef RT_BIG_ENDIAN - RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE); -#endif // // fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET // should always has only one ohysical buffer, and the whole frame size equals @@ -470,9 +564,7 @@ NDIS_STATUS MlmeHardTransmitTxRing( pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket; pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL; -#ifdef RT_BIG_ENDIAN - RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI); -#endif + SrcBufPA = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE); @@ -484,11 +576,6 @@ NDIS_STATUS MlmeHardTransmitTxRing( pTxD->SDPtr0 = SrcBufPA; pTxD->DMADONE = 0; -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD); -#endif - pAd->RalinkCounters.KickTxCount++; pAd->RalinkCounters.OneSecTxDoneCount++; @@ -499,7 +586,25 @@ NDIS_STATUS MlmeHardTransmitTxRing( return NDIS_STATUS_SUCCESS; } +#endif /* RT2860 */ +#ifdef RT30xx +NDIS_STATUS MlmeDataHardTransmit( + IN PRTMP_ADAPTER pAd, + IN UCHAR QueIdx, + IN PNDIS_PACKET pPacket) +{ + if ((pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE) + ) + { + return NDIS_STATUS_FAILURE; + } + +#ifdef RT2870 + return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket); +#endif // RT2870 // +} +#endif /* RT30xx */ NDIS_STATUS MlmeHardTransmitMgmtRing( IN PRTMP_ADAPTER pAd, @@ -525,14 +630,14 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( return NDIS_STATUS_FAILURE; } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // outgoing frame always wakeup PHY to prevent frame lost - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - AsicForceWakeup(pAd, FROM_TX); - } -#endif // CONFIG_STA_SUPPORT // + // outgoing frame always wakeup PHY to prevent frame lost + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) +#ifdef RT2860 + AsicForceWakeup(pAd, FROM_TX); +#endif +#ifdef RT2870 + AsicForceWakeup(pAd, TRUE); +#endif pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA + TXINFO_SIZE); pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE); @@ -556,14 +661,10 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1); } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode. if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED -#ifdef DOT11_N_SUPPORT || pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED -#endif // DOT11_N_SUPPORT // ) { if (pAd->LatchRfRegs.Channel > 14) @@ -572,7 +673,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( pAd->CommonCfg.MlmeTransmit.field.MODE = 0; } } -#endif // CONFIG_STA_SUPPORT // // // Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE) @@ -582,7 +682,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( // pHeader_802_11->FC.PwrMgmt = 0; // (pAd->StaCfg.Psm == PWR_SAVE); // // In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame -#ifdef CONFIG_STA_SUPPORT + // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL)) { @@ -592,18 +692,15 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( else pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE; } -#endif // CONFIG_STA_SUPPORT // bInsertTimestamp = FALSE; if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL { -#ifdef CONFIG_STA_SUPPORT //Set PM bit in ps-poll, to fix WLK 1.2 PowerSaveMode_ext failure issue. if ((pAd->OpMode == OPMODE_STA) && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL)) { pHeader_802_11->FC.PwrMgmt = PWR_SAVE; } -#endif // CONFIG_STA_SUPPORT // bAckRequired = FALSE; } else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame) @@ -639,10 +736,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( return (NDIS_STATUS_FAILURE); } -#ifdef RT_BIG_ENDIAN - RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE); -#endif - // // fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET // should always has only one ohysical buffer, and the whole frame size equals @@ -669,10 +762,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode); } -#ifdef RT_BIG_ENDIAN - RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI); -#endif - // Now do hardware-depened kick out. HAL_KickOutMgmtTx(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen); @@ -752,9 +841,7 @@ static UCHAR TxPktClassification( UCHAR TxFrameType = TX_UNKOWN_FRAME; UCHAR Wcid; MAC_TABLE_ENTRY *pMacEntry = NULL; -#ifdef DOT11_N_SUPPORT BOOLEAN bHTRate = FALSE; -#endif // DOT11_N_SUPPORT // Wcid = RTMP_GET_PACKET_WCID(pPacket); if (Wcid == MCAST_WCID) @@ -768,7 +855,6 @@ static UCHAR TxPktClassification( { // It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame TxFrameType = TX_LEGACY_FRAME; } -#ifdef DOT11_N_SUPPORT else if (IS_HT_RATE(pMacEntry)) { // it's a 11n capable packet @@ -788,7 +874,6 @@ static UCHAR TxPktClassification( else TxFrameType = TX_LEGACY_FRAME; } -#endif // DOT11_N_SUPPORT // else { // it's a legacy b/g packet. if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) && @@ -874,16 +959,15 @@ BOOLEAN RTMP_FillTxBlkInfo( TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired); { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - - // If support WMM, enable it. - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)) - TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM); - } -#endif // CONFIG_STA_SUPPORT // + // If support WMM, enable it. +#ifdef RT2860 + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)) +#endif +#ifdef RT2870 + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && + CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)) +#endif + TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM); } if (pTxBlk->TxFrameType == TX_LEGACY_FRAME) @@ -892,7 +976,7 @@ BOOLEAN RTMP_FillTxBlkInfo( ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1))) { // Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate. pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode; -#ifdef DOT11_N_SUPPORT + // Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it??? if (IS_HT_STA(pTxBlk->pMacEntry) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET)) && @@ -901,16 +985,13 @@ BOOLEAN RTMP_FillTxBlkInfo( TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM); TX_BLK_SET_FLAG(pTxBlk, fTX_bForceNonQoS); } -#endif // DOT11_N_SUPPORT // } -#ifdef DOT11_N_SUPPORT if ( (IS_HT_RATE(pMacEntry) == FALSE) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE))) { // Currently piggy-back only support when peer is operate in b/g mode. TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack); } -#endif // DOT11_N_SUPPORT // if (RTMP_GET_PACKET_MOREDATA(pPacket)) { @@ -932,6 +1013,11 @@ BOOLEAN RTMP_FillTxBlkInfo( } return TRUE; + +#ifdef RT30xx +FillTxBlkErr: + return FALSE; +#endif } @@ -963,13 +1049,10 @@ BOOLEAN CanDoAggregateTransmit( return FALSE; } -#ifdef CONFIG_STA_SUPPORT if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP return TRUE; else -#endif // CONFIG_STA_SUPPORT // return FALSE; - } @@ -1022,6 +1105,7 @@ VOID RTMPDeQueuePacket( if (QIdx == NUM_OF_TX_RING) { sQIdx = 0; +//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA) eQIdx = 3; // 4 ACs, start from 0. } else @@ -1064,7 +1148,7 @@ VOID RTMPDeQueuePacket( DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags); break; } - +#ifdef RT2860 FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx); #ifdef DBG_DIAGNOSE @@ -1089,7 +1173,7 @@ VOID RTMPDeQueuePacket( RTMPFreeTXDUponTxDmaDone(pAd, QueIdx); FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx); } - +#endif /* RT2860 */ // probe the Queue Head pQueue = &pAd->TxSwQueue[QueIdx]; if ((pEntry = pQueue->Head) == NULL) @@ -1158,32 +1242,29 @@ VOID RTMPDeQueuePacket( pTxBlk->TxFrameType = TX_LEGACY_FRAME; } +#ifdef RT2870 + DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags); +#endif // RT2870 // Count += pTxBlk->TxPacketList.Number; - // Do HardTransmit now. -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - Status = STAHardTransmit(pAd, pTxBlk, QueIdx); -#endif // CONFIG_STA_SUPPORT // + // Do HardTransmit now. + Status = STAHardTransmit(pAd, pTxBlk, QueIdx); +#ifdef RT2860 DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags); // static rate also need NICUpdateFifoStaCounters() function. //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) NICUpdateFifoStaCounters(pAd); +#endif } RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags); - -#ifdef BLOCK_NET_IF - if ((pAd->blockQueueTab[QueIdx].SwTxQueueBlockFlag == TRUE) - && (pAd->TxSwQueue[QueIdx].Number < 1)) - { - releaseNetIf(&pAd->blockQueueTab[QueIdx]); - } -#endif // BLOCK_NET_IF // - +#ifdef RT2870 + if (!hasTxDesc) + RTUSBKickBulkOut(pAd); +#endif // RT2870 // } } @@ -1318,7 +1399,6 @@ VOID RTMPWriteTxWI( pTxWI->NSEQ = NSeq; // John tune the performace with Intel Client in 20 MHz performance -#ifdef DOT11_N_SUPPORT BASize = pAd->CommonCfg.TxBASize; if( BASize >7 ) @@ -1326,7 +1406,6 @@ VOID RTMPWriteTxWI( pTxWI->BAWinSize = BASize; pTxWI->ShortGI = pTransmit->field.ShortGI; pTxWI->STBC = pTransmit->field.STBC; -#endif // DOT11_N_SUPPORT // pTxWI->WirelessCliID = WCID; pTxWI->MPDUtotalByteCount = Length; @@ -1334,16 +1413,11 @@ VOID RTMPWriteTxWI( // If CCK or OFDM, BW must be 20 pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW); -#ifdef DOT11N_DRAFT3 - if (pTxWI->BW) - pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW); -#endif // DOT11N_DRAFT3 // pTxWI->MCS = pTransmit->field.MCS; pTxWI->PHYMODE = pTransmit->field.MODE; pTxWI->CFACK = CfAck; -#ifdef DOT11_N_SUPPORT if (pMac) { if (pAd->CommonCfg.bMIMOPSEnable) @@ -1373,7 +1447,6 @@ VOID RTMPWriteTxWI( pTxWI->MpduDensity = pMac->MpduDensity; } } -#endif // DOT11_N_SUPPORT // pTxWI->PacketId = pTxWI->MCS; NdisMoveMemory(pOutTxWI, &TxWI, sizeof(TXWI_STRUC)); @@ -1387,10 +1460,7 @@ VOID RTMPWriteTxWI_Data( { HTTRANSMIT_SETTING *pTransmit; PMAC_TABLE_ENTRY pMacEntry; -#ifdef DOT11_N_SUPPORT UCHAR BASize; -#endif // DOT11_N_SUPPORT // - ASSERT(pTxWI); @@ -1409,15 +1479,6 @@ VOID RTMPWriteTxWI_Data( pTxWI->ACK = TX_BLK_TEST_FLAG(pTxBlk, fTX_bAckRequired); pTxWI->txop = pTxBlk->FrameGap; -#ifdef CONFIG_STA_SUPPORT -#ifdef QOS_DLS_SUPPORT - if (pMacEntry && - (pAd->StaCfg.BssType == BSS_INFRA) && - (pMacEntry->ValidAsDls == TRUE)) - pTxWI->WirelessCliID = BSSID_WCID; - else -#endif // QOS_DLS_SUPPORT // -#endif // CONFIG_STA_SUPPORT // pTxWI->WirelessCliID = pTxBlk->Wcid; pTxWI->MPDUtotalByteCount = pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen; @@ -1425,11 +1486,6 @@ VOID RTMPWriteTxWI_Data( // If CCK or OFDM, BW must be 20 pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW); -#ifdef DOT11_N_SUPPORT -#ifdef DOT11N_DRAFT3 - if (pTxWI->BW) - pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW); -#endif // DOT11N_DRAFT3 // pTxWI->AMPDU = ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE); // John tune the performace with Intel Client in 20 MHz performance @@ -1446,12 +1502,10 @@ VOID RTMPWriteTxWI_Data( pTxWI->BAWinSize = BASize; pTxWI->ShortGI = pTransmit->field.ShortGI; pTxWI->STBC = pTransmit->field.STBC; -#endif // DOT11_N_SUPPORT // pTxWI->MCS = pTransmit->field.MCS; pTxWI->PHYMODE = pTransmit->field.MODE; -#ifdef DOT11_N_SUPPORT if (pMacEntry) { if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7)) @@ -1478,7 +1532,6 @@ VOID RTMPWriteTxWI_Data( pTxWI->MpduDensity = pMacEntry->MpduDensity; } } -#endif // DOT11_N_SUPPORT // #ifdef DBG_DIAGNOSE if (pTxBlk->QueIdx== 0) @@ -1523,15 +1576,9 @@ VOID RTMPWriteTxWI_Cache( pTxWI->PacketId = pTransmit->field.MCS; } -#ifdef DOT11_N_SUPPORT pTxWI->AMPDU = ((pMacEntry->NoBADataCountDown == 0) ? TRUE: FALSE); pTxWI->MIMOps = 0; -#ifdef DOT11N_DRAFT3 - if (pTxWI->BW) - pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW); -#endif // DOT11N_DRAFT3 // - if (pAd->CommonCfg.bMIMOPSEnable) { // MIMO Power Save Mode @@ -1550,7 +1597,6 @@ VOID RTMPWriteTxWI_Cache( } } } -#endif // DOT11_N_SUPPORT // #ifdef DBG_DIAGNOSE if (pTxBlk->QueIdx== 0) @@ -1665,12 +1711,10 @@ BOOLEAN PeerIsAggreOn( if (pMacEntry != NULL && CLIENT_STATUS_TEST_FLAG(pMacEntry, AFlags)) { -#ifdef DOT11_N_SUPPORT if (pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX) { return TRUE; } -#endif // DOT11_N_SUPPORT // #ifdef AGGREGATION_SUPPORT if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) @@ -1748,16 +1792,13 @@ PQUEUE_HEADER RTMPCheckTxSwQueue( return (NULL); } - +#ifdef RT2860 BOOLEAN RTMPFreeTXDUponTxDmaDone( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx) { PRTMP_TX_RING pTxRing; PTXD_STRUC pTxD; -#ifdef RT_BIG_ENDIAN - PTXD_STRUC pDestTxD; -#endif PNDIS_PACKET pPacket; UCHAR FREE = 0; TXD_STRUC TxD, *pOriTxD; @@ -1771,111 +1812,19 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone( RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF, &pTxRing->TxDmaIdx); while (pTxRing->TxSwFreeIdx != pTxRing->TxDmaIdx) { -#ifdef RALINK_ATE -#ifdef RALINK_28xx_QA - PHEADER_802_11 pHeader80211; - - if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE)) - { - if (pAd->ate.QID == QueIdx) - { - pAd->ate.TxDoneCount++; - //pAd->ate.Repeat++; - pAd->RalinkCounters.KickTxCount++; - - /* always use QID_AC_BE and FIFO_EDCA */ - ASSERT(pAd->ate.QID == 0); - pAd->ate.TxAc0++; - - FREE++; -#ifndef RT_BIG_ENDIAN - pTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa); - pOriTxD = pTxD; - NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC)); - pTxD = &TxD; -#else - pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa); - pOriTxD = pDestTxD ; - TxD = *pDestTxD; - pTxD = &TxD; - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); -#endif - pTxD->DMADONE = 0; - - pHeader80211 = pTxRing->Cell[pTxRing->TxSwFreeIdx].DmaBuf.AllocVa + sizeof(TXWI_STRUC); -#ifdef RT_BIG_ENDIAN - RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_READ, FALSE); -#endif - pHeader80211->Sequence = ++pAd->ate.seq; -#ifdef RT_BIG_ENDIAN - RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_WRITE, FALSE); -#endif - - if ((pAd->ate.bQATxStart == TRUE) && (pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.TxDoneCount < pAd->ate.TxCount)) - { - pAd->RalinkCounters.TransmittedByteCount += (pTxD->SDLen1 + pTxD->SDLen0); - pAd->RalinkCounters.OneSecDmaDoneCount[QueIdx] ++; - INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE); - /* get tx_tdx_idx again */ - RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF , &pTxRing->TxDmaIdx); - goto kick_out; - } - else if ((pAd->ate.TxStatus == 1)/* or (pAd->ate.bQATxStart == TRUE) ??? */ && (pAd->ate.TxDoneCount == pAd->ate.TxCount))//<========================PETER - { - DBGPRINT(RT_DEBUG_TRACE,("all Tx is done\n")); - // Tx status enters idle mode. - pAd->ate.TxStatus = 0; - } - else if (!(pAd->ate.Mode & ATE_TXFRAME)) - { - /* not complete sending yet, but someone press the Stop TX botton. */ - DBGPRINT(RT_DEBUG_ERROR,("not complete sending yet, but someone pressed the Stop TX bottom\n")); - DBGPRINT(RT_DEBUG_ERROR,("pAd->ate.Mode = 0x%02x\n", pAd->ate.Mode)); - } - else - { - DBGPRINT(RT_DEBUG_OFF,("pTxRing->TxSwFreeIdx = %d\n", pTxRing->TxSwFreeIdx)); - } -#ifndef RT_BIG_ENDIAN - NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC)); -#else - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - *pDestTxD = TxD; -#endif // RT_BIG_ENDIAN // - - INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE); - continue; - } - } -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - // static rate also need NICUpdateFifoStaCounters() function. //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) NICUpdateFifoStaCounters(pAd); /* Note : If (pAd->ate.bQATxStart == TRUE), we will never reach here. */ FREE++; -#ifndef RT_BIG_ENDIAN pTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa); pOriTxD = pTxD; NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC)); pTxD = &TxD; -#else - pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa); - pOriTxD = pDestTxD ; - TxD = *pDestTxD; - pTxD = &TxD; - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); -#endif pTxD->DMADONE = 0; - -#ifdef RALINK_ATE - /* Execution of this block is not allowed when ATE is running. */ - if (!(ATE_ON(pAd))) -#endif // RALINK_ATE // /*====================================================================*/ { pPacket = pTxRing->Cell[pTxRing->TxSwFreeIdx].pNdisPacket; @@ -1915,59 +1864,8 @@ BOOLEAN RTMPFreeTXDUponTxDmaDone( INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE); /* get tx_tdx_idx again */ RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF , &pTxRing->TxDmaIdx); -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - *pDestTxD = TxD; -#else - NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC)); -#endif - -#ifdef RALINK_ATE -#ifdef RALINK_28xx_QA -kick_out: -#endif // RALINK_28xx_QA // - // - // ATE_TXCONT mode also need to send some normal frames, so let it in. - // ATE_STOP must be changed not to be 0xff - // to prevent it from running into this block. - // - if ((pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.QID == QueIdx)) - { - // TxDoneCount++ has been done if QA is used. - if (pAd->ate.bQATxStart == FALSE) - { - pAd->ate.TxDoneCount++; - } - if (((pAd->ate.TxCount - pAd->ate.TxDoneCount + 1) >= TX_RING_SIZE)) - { - /* Note : We increase TxCpuIdx here, not TxSwFreeIdx ! */ - INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE); -#ifndef RT_BIG_ENDIAN//<==========================PETER - pTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa); - pOriTxD = pTxD; - NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC)); - pTxD = &TxD; -#else - pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa); - pOriTxD = pDestTxD ; - TxD = *pDestTxD; - pTxD = &TxD; - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); -#endif - pTxD->DMADONE = 0; -#ifndef RT_BIG_ENDIAN//<==========================PETER - NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC)); -#else - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - *pDestTxD = TxD; -#endif - // kick Tx-Ring. - RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx * RINGREG_DIFF, pAd->TxRing[QueIdx].TxCpuIdx); - pAd->RalinkCounters.KickTxCount++; - } - } -#endif // RALINK_ATE // + NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC)); } @@ -2050,10 +1948,6 @@ VOID RTMPHandleMgmtRingDmaDoneInterrupt( IN PRTMP_ADAPTER pAd) { PTXD_STRUC pTxD; -#ifdef RT_BIG_ENDIAN - PTXD_STRUC pDestTxD; - TXD_STRUC TxD; -#endif PNDIS_PACKET pPacket; UCHAR FREE = 0; PRTMP_MGMT_RING pMgmtRing = &pAd->MgmtRing; @@ -2064,14 +1958,7 @@ VOID RTMPHandleMgmtRingDmaDoneInterrupt( while (pMgmtRing->TxSwFreeIdx!= pMgmtRing->TxDmaIdx) { FREE++; -#ifdef RT_BIG_ENDIAN - pDestTxD = (PTXD_STRUC) (pMgmtRing->Cell[pAd->MgmtRing.TxSwFreeIdx].AllocVa); - TxD = *pDestTxD; - pTxD = &TxD; - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); -#else pTxD = (PTXD_STRUC) (pMgmtRing->Cell[pAd->MgmtRing.TxSwFreeIdx].AllocVa); -#endif pTxD->DMADONE = 0; pPacket = pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNdisPacket; @@ -2091,11 +1978,6 @@ VOID RTMPHandleMgmtRingDmaDoneInterrupt( } pMgmtRing->Cell[pMgmtRing->TxSwFreeIdx].pNextNdisPacket = NULL; INC_RING_INDEX(pMgmtRing->TxSwFreeIdx, MGMT_RING_SIZE); - -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, TRUE, TYPE_TXD); -#endif } NdisReleaseSpinLock(&pAd->MgmtRingLock); @@ -2293,6 +2175,7 @@ VOID DBGPRINT_RX_RING( DBGPRINT_RAW(RT_DEBUG_TRACE,(" RxSwReadIdx [%d]=", AC0freeIdx)); DBGPRINT_RAW(RT_DEBUG_TRACE,(" pending-NDIS=%ld\n", pAd->RalinkCounters.PendingNdisPacketCount)); } +#endif /* RT2860 */ /* ======================================================================== @@ -2352,7 +2235,15 @@ VOID RTMPResumeMsduTransmission( { DBGPRINT(RT_DEBUG_TRACE,("SCAN done, resume MSDU transmission ...\n")); - +#ifdef RT30xx + // After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value + // R66 should not be 0 + if (pAd->BbpTuning.R66CurrentValue == 0) + { + pAd->BbpTuning.R66CurrentValue = 0x38; + DBGPRINT_ERR(("RTMPResumeMsduTransmission, R66CurrentValue=0...\n")); + } +#endif RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, pAd->BbpTuning.R66CurrentValue); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); @@ -2401,7 +2292,6 @@ UINT deaggregate_AMSDU_announce( // convert to 802.3 header CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize, pRemovedLLCSNAP); -#ifdef CONFIG_STA_SUPPORT if ((Header802_3[12] == 0x88) && (Header802_3[13] == 0x8E) ) { // avoid local heap overflow, use dyanamic allocation @@ -2411,10 +2301,7 @@ UINT deaggregate_AMSDU_announce( WpaEAPOLKeyAction(pAd, Elem); kfree(Elem); } -#endif // CONFIG_STA_SUPPORT // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pRemovedLLCSNAP) { @@ -2423,15 +2310,11 @@ UINT deaggregate_AMSDU_announce( NdisMoveMemory(pPayload, &Header802_3[0], LENGTH_802_3); } } -#endif // CONFIG_STA_SUPPORT // pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize); if (pClonePacket) { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket)); -#endif // CONFIG_STA_SUPPORT // + ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket)); } @@ -2527,11 +2410,9 @@ MAC_TABLE_ENTRY *MacTableInsertEntry( return NULL; FirstWcid = 1; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + if (pAd->StaCfg.BssType == BSS_INFRA) FirstWcid = 2; -#endif // CONFIG_STA_SUPPORT // // allocate one MAC entry NdisAcquireSpinLock(&pAd->MacTabLock); @@ -2542,11 +2423,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry( (pAd->MacTab.Content[i].ValidAsWDS == FALSE) && (pAd->MacTab.Content[i].ValidAsApCli== FALSE) && (pAd->MacTab.Content[i].ValidAsMesh == FALSE) -#ifdef CONFIG_STA_SUPPORT -#ifdef QOS_DLS_SUPPORT - && (pAd->MacTab.Content[i].ValidAsDls == FALSE) -#endif // QOS_DLS_SUPPORT // -#endif // CONFIG_STA_SUPPORT // ) { pEntry = &pAd->MacTab.Content[i]; @@ -2558,24 +2434,7 @@ MAC_TABLE_ENTRY *MacTableInsertEntry( pEntry->PairwiseKey.KeyLen = 0; pEntry->PairwiseKey.CipherAlg = CIPHER_NONE; } -#ifdef CONFIG_STA_SUPPORT -#ifdef QOS_DLS_SUPPORT - if (apidx >= MIN_NET_DEVICE_FOR_DLS) - { - pEntry->ValidAsCLI = FALSE; - pEntry->ValidAsWDS = FALSE; - pEntry->ValidAsApCli = FALSE; - pEntry->ValidAsMesh = FALSE; - pEntry->ValidAsDls = TRUE; - pEntry->isCached = FALSE; - } - else -#endif // QOS_DLS_SUPPORT // -#endif // CONFIG_STA_SUPPORT // { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pEntry->ValidAsCLI = TRUE; pEntry->ValidAsWDS = FALSE; @@ -2583,7 +2442,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry( pEntry->ValidAsMesh = FALSE; pEntry->ValidAsDls = FALSE; } -#endif // CONFIG_STA_SUPPORT // } pEntry->bIAmBadAtheros = FALSE; @@ -2600,43 +2458,32 @@ MAC_TABLE_ENTRY *MacTableInsertEntry( pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_APCLI); else if (pEntry->ValidAsWDS) pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_WDS); -#ifdef CONFIG_STA_SUPPORT -#ifdef QOS_DLS_SUPPORT - else if (pEntry->ValidAsDls) - pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_DLS); -#endif // QOS_DLS_SUPPORT // -#endif // CONFIG_STA_SUPPORT // else pEntry->apidx = apidx; { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pEntry->AuthMode = pAd->StaCfg.AuthMode; pEntry->WepStatus = pAd->StaCfg.WepStatus; pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll; +#ifdef RT2860 AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)i); +#endif } -#endif // CONFIG_STA_SUPPORT // } pEntry->GTKState = REKEY_NEGOTIATING; pEntry->PairwiseKey.KeyLen = 0; pEntry->PairwiseKey.CipherAlg = CIPHER_NONE; -#ifdef CONFIG_STA_SUPPORT + +#ifdef RT2860 if ((pAd->OpMode == OPMODE_STA) && (pAd->StaCfg.BssType == BSS_ADHOC)) pEntry->PortSecured = WPA_802_1X_PORT_SECURED; else -#ifdef QOS_DLS_SUPPORT - if (pEntry->ValidAsDls == TRUE) - pEntry->PortSecured = WPA_802_1X_PORT_SECURED; - else -#endif //QOS_DLS_SUPPORT -#endif // CONFIG_STA_SUPPORT // +#endif pEntry->PortSecured = WPA_802_1X_PORT_NOT_SECURED; + pEntry->PMKID_CacheIdx = ENTRY_NOT_FOUND; COPY_MAC_ADDR(pEntry->Addr, pAddr); pEntry->Sst = SST_NOT_AUTH; @@ -2706,11 +2553,6 @@ BOOLEAN MacTableDeleteEntry( pEntry = &pAd->MacTab.Content[wcid]; if (pEntry && (pEntry->ValidAsCLI || pEntry->ValidAsApCli || pEntry->ValidAsWDS || pEntry->ValidAsMesh -#ifdef CONFIG_STA_SUPPORT -#ifdef QOS_DLS_SUPPORT - || pEntry->ValidAsDls -#endif // QOS_DLS_SUPPORT // -#endif // CONFIG_STA_SUPPORT // )) { if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr)) @@ -2719,11 +2561,8 @@ BOOLEAN MacTableDeleteEntry( // Delete this entry from ASIC on-chip WCID Table RT28XX_STA_ENTRY_MAC_RESET(pAd, wcid); -#ifdef DOT11_N_SUPPORT // free resources of BA BASessionTearDownALL(pAd, pEntry->Aid); -#endif // DOT11_N_SUPPORT // - pPrevEntry = NULL; pProbeEntry = pAd->MacTab.Hash[HashIdx]; @@ -2777,10 +2616,13 @@ BOOLEAN MacTableDeleteEntry( //Reset operating mode when no Sta. if (pAd->MacTab.Size == 0) { -#ifdef DOT11_N_SUPPORT pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0; -#endif // DOT11_N_SUPPORT // +#ifndef RT30xx AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/); +#endif +#ifdef RT30xx + RT28XX_UPDATE_PROTECT(pAd); // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet +#endif } return TRUE; @@ -2804,19 +2646,22 @@ VOID MacTableReset( for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++) { +#ifdef RT2860 RT28XX_STA_ENTRY_MAC_RESET(pAd, i); +#endif if (pAd->MacTab.Content[i].ValidAsCLI == TRUE) { - -#ifdef DOT11_N_SUPPORT // free resources of BA BASessionTearDownALL(pAd, i); -#endif // DOT11_N_SUPPORT // pAd->MacTab.Content[i].ValidAsCLI = FALSE; +#ifdef RT2870 + NdisZeroMemory(pAd->MacTab.Content[i].Addr, 6); + RT28XX_STA_ENTRY_MAC_RESET(pAd, i); +#endif // RT2870 // //AsicDelWcidTab(pAd, i); } @@ -3116,10 +2961,7 @@ VOID Indicate_Legacy_Packet( // 2. remove LLC // a. pointer pRxBlk->pData to payload // b. modify pRxBlk->DataSize -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3); -#endif // CONFIG_STA_SUPPORT // + RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3); if (pRxBlk->DataSize > MAX_RX_PKT_LEN) { @@ -3132,17 +2974,44 @@ VOID Indicate_Legacy_Packet( STATS_INC_RX_PACKETS(pAd, FromWhichBSSID); +#ifdef RT2870 + if (pAd->CommonCfg.bDisableReordering == 0) + { + PBA_REC_ENTRY pBAEntry; + ULONG Now32; + UCHAR Wcid = pRxBlk->pRxWI->WirelessCliID; + UCHAR TID = pRxBlk->pRxWI->TID; + USHORT Idx; + +#define REORDERING_PACKET_TIMEOUT ((100 * HZ)/1000) // system ticks -- 100 ms + + if (Wcid < MAX_LEN_OF_MAC_TABLE) + { + Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID]; + if (Idx != 0) + { + pBAEntry = &pAd->BATable.BARecEntry[Idx]; + // update last rx time + NdisGetSystemUpTime(&Now32); + if ((pBAEntry->list.qlen > 0) && + RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(REORDERING_PACKET_TIMEOUT))) + ) + { + printk("Indicate_Legacy_Packet():flush reordering_timeout_mpdus! RxWI->Flags=%d, pRxWI.TID=%d, RxD->AMPDU=%d!\n", pRxBlk->Flags, pRxBlk->pRxWI->TID, pRxBlk->RxD.AMPDU); + hex_dump("Dump the legacy Packet:", GET_OS_PKT_DATAPTR(pRxBlk->pRxPacket), 64); + ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32); + } + } + } + } +#endif // RT2870 // wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID); // // pass this 802.3 packet to upper layer or forward this packet to WM directly // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID); -#endif // CONFIG_STA_SUPPORT // - + ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID); } @@ -3152,22 +3021,18 @@ VOID CmmRxnonRalinkFrameIndicate( IN RX_BLK *pRxBlk, IN UCHAR FromWhichBSSID) { -#ifdef DOT11_N_SUPPORT if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0)) { Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID); } else -#endif // DOT11_N_SUPPORT // { -#ifdef DOT11_N_SUPPORT if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)) { // handle A-MSDU Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID); } else -#endif // DOT11_N_SUPPORT // { Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID); } @@ -3205,11 +3070,7 @@ VOID CmmRxRalinkFrameIndicate( } // get 802.3 Header and remove LLC -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3); -#endif // CONFIG_STA_SUPPORT // - + RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3); ASSERT(pRxBlk->pRxPacket); @@ -3219,10 +3080,8 @@ VOID CmmRxRalinkFrameIndicate( Payload2Size = Msdu2Size - LENGTH_802_3; pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID); -#endif // CONFIG_STA_SUPPORT // + + pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID); if (!pPacket2) { @@ -3235,17 +3094,11 @@ VOID CmmRxRalinkFrameIndicate( pRxBlk->DataSize = Payload1Size; wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID); -#endif // CONFIG_STA_SUPPORT // + ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID); if (pPacket2) { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID); -#endif // CONFIG_STA_SUPPORT // + ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID); } } @@ -3388,15 +3241,11 @@ VOID Indicate_EAPOL_Packet( { MAC_TABLE_ENTRY *pEntry = NULL; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pEntry = &pAd->MacTab.Content[BSSID_WCID]; STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID); return; } -#endif // CONFIG_STA_SUPPORT // if (pEntry == NULL) { diff --git a/drivers/staging/rt2860/common/cmm_data_2860.c b/drivers/staging/rt2860/common/cmm_data_2860.c index fae741e4beeb..fb1735533b74 100644 --- a/drivers/staging/rt2860/common/cmm_data_2860.c +++ b/drivers/staging/rt2860/common/cmm_data_2860.c @@ -110,10 +110,6 @@ USHORT RtmpPCI_WriteSingleTxResource( UCHAR *pDMAHeaderBufVA; USHORT TxIdx, RetTxIdx; PTXD_STRUC pTxD; -#ifdef RT_BIG_ENDIAN - PTXD_STRUC pDestTxD; - TXD_STRUC TxD; -#endif UINT32 BufBasePaLow; PRTMP_TX_RING pTxRing; USHORT hwHeaderLen; @@ -137,13 +133,8 @@ USHORT RtmpPCI_WriteSingleTxResource( // // build Tx Descriptor // -#ifndef RT_BIG_ENDIAN pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; -#else - pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; - TxD = *pDestTxD; - pTxD = &TxD; -#endif + NdisZeroMemory(pTxD, TXD_SIZE); pTxD->SDPtr0 = BufBasePaLow; @@ -154,12 +145,6 @@ USHORT RtmpPCI_WriteSingleTxResource( pTxD->LastSec1 = (bIsLast) ? 1 : 0; RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA); -#ifdef RT_BIG_ENDIAN - RTMPWIEndianChange((PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI); - RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE); - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD); -#endif // RT_BIG_ENDIAN // RetTxIdx = TxIdx; // @@ -184,10 +169,6 @@ USHORT RtmpPCI_WriteMultiTxResource( UCHAR *pDMAHeaderBufVA; USHORT TxIdx, RetTxIdx; PTXD_STRUC pTxD; -#ifdef RT_BIG_ENDIAN - PTXD_STRUC pDestTxD; - TXD_STRUC TxD; -#endif UINT32 BufBasePaLow; PRTMP_TX_RING pTxRing; USHORT hwHdrLen; @@ -231,13 +212,8 @@ USHORT RtmpPCI_WriteMultiTxResource( // // build Tx Descriptor // -#ifndef RT_BIG_ENDIAN pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; -#else - pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; - TxD = *pDestTxD; - pTxD = &TxD; -#endif + NdisZeroMemory(pTxD, TXD_SIZE); pTxD->SDPtr0 = BufBasePaLow; @@ -249,17 +225,6 @@ USHORT RtmpPCI_WriteMultiTxResource( RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA); -#ifdef RT_BIG_ENDIAN - if (frameNum == 0) - RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA+ TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE); - - if (frameNum != 0) - RTMPWIEndianChange((PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI); - - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD); -#endif // RT_BIG_ENDIAN // - RetTxIdx = TxIdx; // // Update Tx index @@ -290,10 +255,6 @@ VOID RtmpPCI_FinalWriteTxResource( pTxRing = &pAd->TxRing[pTxBlk->QueIdx]; pTxWI = (PTXWI_STRUC) pTxRing->Cell[FirstTxIdx].DmaBuf.AllocVa; pTxWI->MPDUtotalByteCount = totalMPDUSize; -#ifdef RT_BIG_ENDIAN - RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI); -#endif // RT_BIG_ENDIAN // - } @@ -303,10 +264,6 @@ VOID RtmpPCIDataLastTxIdx( IN USHORT LastTxIdx) { PTXD_STRUC pTxD; -#ifdef RT_BIG_ENDIAN - PTXD_STRUC pDestTxD; - TXD_STRUC TxD; -#endif PRTMP_TX_RING pTxRing; // @@ -317,21 +274,9 @@ VOID RtmpPCIDataLastTxIdx( // // build Tx Descriptor // -#ifndef RT_BIG_ENDIAN pTxD = (PTXD_STRUC) pTxRing->Cell[LastTxIdx].AllocVa; -#else - pDestTxD = (PTXD_STRUC) pTxRing->Cell[LastTxIdx].AllocVa; - TxD = *pDestTxD; - pTxD = &TxD; -#endif pTxD->LastSec1 = 1; - -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD); -#endif // RT_BIG_ENDIAN // - } @@ -344,10 +289,6 @@ USHORT RtmpPCI_WriteFragTxResource( UCHAR *pDMAHeaderBufVA; USHORT TxIdx, RetTxIdx; PTXD_STRUC pTxD; -#ifdef RT_BIG_ENDIAN - PTXD_STRUC pDestTxD; - TXD_STRUC TxD; -#endif UINT32 BufBasePaLow; PRTMP_TX_RING pTxRing; USHORT hwHeaderLen; @@ -373,13 +314,8 @@ USHORT RtmpPCI_WriteFragTxResource( // // Build Tx Descriptor // -#ifndef RT_BIG_ENDIAN pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; -#else - pDestTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa; - TxD = *pDestTxD; - pTxD = &TxD; -#endif + NdisZeroMemory(pTxD, TXD_SIZE); if (fragNum == pTxBlk->TotalFragNum) @@ -397,13 +333,6 @@ USHORT RtmpPCI_WriteFragTxResource( RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA); -#ifdef RT_BIG_ENDIAN - RTMPWIEndianChange((PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE), TYPE_TXWI); - RTMPFrameEndianChange(pAd, (PUCHAR)(pDMAHeaderBufVA + TXINFO_SIZE + TXWI_SIZE), DIR_WRITE, FALSE); - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD); -#endif // RT_BIG_ENDIAN // - RetTxIdx = TxIdx; pTxBlk->Priv += pTxBlk->SrcBufLen; @@ -431,20 +360,9 @@ int RtmpPCIMgmtKickOut( IN UINT SrcBufLen) { PTXD_STRUC pTxD; -#ifdef RT_BIG_ENDIAN - PTXD_STRUC pDestTxD; - TXD_STRUC TxD; -#endif ULONG SwIdx = pAd->MgmtRing.TxCpuIdx; -#ifdef RT_BIG_ENDIAN - pDestTxD = (PTXD_STRUC)pAd->MgmtRing.Cell[SwIdx].AllocVa; - TxD = *pDestTxD; - pTxD = &TxD; - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); -#else pTxD = (PTXD_STRUC) pAd->MgmtRing.Cell[SwIdx].AllocVa; -#endif pAd->MgmtRing.Cell[SwIdx].pNdisPacket = pPacket; pAd->MgmtRing.Cell[SwIdx].pNextNdisPacket = NULL; @@ -457,11 +375,6 @@ int RtmpPCIMgmtKickOut( pTxD->SDPtr0 = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);; pTxD->SDLen0 = SrcBufLen; -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD); - WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD); -#endif - pAd->RalinkCounters.KickTxCount++; pAd->RalinkCounters.OneSecTxDoneCount++; @@ -473,8 +386,6 @@ int RtmpPCIMgmtKickOut( return 0; } - -#ifdef CONFIG_STA_SUPPORT /* ======================================================================== @@ -570,12 +481,11 @@ NDIS_STATUS RTMPCheckRxError( if (pRxD->CipherErr == 2) { pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex]; -#ifdef WPA_SUPPLICANT_SUPPORT + if (pAd->StaCfg.WpaSupplicantUP) WpaSendMicFailureToWpaSupplicant(pAd, (pWpaKey->Type == PAIRWISEKEY) ? TRUE:FALSE); else -#endif // WPA_SUPPLICANT_SUPPORT // RTMPReportMicError(pAd, pWpaKey); if (((pRxD->CipherErr & 2) == 2) && pAd->CommonCfg.bWirelessEvent && INFRA_ON(pAd)) @@ -1128,8 +1038,6 @@ VOID RadioOnExec( } } -#endif // CONFIG_STA_SUPPORT // - VOID RT28xxPciMlmeRadioOn( IN PRTMP_ADAPTER pAd) { @@ -1163,7 +1071,6 @@ VOID RT28xxPciMlmeRadioOn( RTMPSetLED(pAd, LED_RADIO_ON); } -#ifdef CONFIG_STA_SUPPORT if ((pAd->OpMode == OPMODE_STA) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))) { @@ -1176,7 +1083,6 @@ VOID RT28xxPciMlmeRadioOn( RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10); } -#endif // CONFIG_STA_SUPPORT // } VOID RT28xxPciMlmeRadioOFF( @@ -1199,8 +1105,6 @@ VOID RT28xxPciMlmeRadioOFF( // Set LED RTMPSetLED(pAd, LED_RADIO_OFF); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { BOOLEAN Cancelled; @@ -1249,7 +1153,6 @@ VOID RT28xxPciMlmeRadioOFF( return; } } -#endif // CONFIG_STA_SUPPORT // // Set Radio off flag RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c index c3e13195e121..306c3a21f905 100644 --- a/drivers/staging/rt2860/common/cmm_info.c +++ b/drivers/staging/rt2860/common/cmm_info.c @@ -63,7 +63,6 @@ INT Show_FragThreshold_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#ifdef DOT11_N_SUPPORT INT Show_HtBw_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); @@ -103,7 +102,6 @@ INT Show_HtAmsdu_Proc( INT Show_HtAutoBa_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#endif // DOT11_N_SUPPORT // INT Show_CountryRegion_Proc( IN PRTMP_ADAPTER pAd, @@ -133,11 +131,9 @@ INT Show_IEEE80211H_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#ifdef CONFIG_STA_SUPPORT INT Show_NetworkType_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#endif // CONFIG_STA_SUPPORT // INT Show_AuthMode_Proc( IN PRTMP_ADAPTER pAd, @@ -184,7 +180,6 @@ static struct { {"BGProtection", Show_BGProtection_Proc}, {"RTSThreshold", Show_RTSThreshold_Proc}, {"FragThreshold", Show_FragThreshold_Proc}, -#ifdef DOT11_N_SUPPORT {"HtBw", Show_HtBw_Proc}, {"HtMcs", Show_HtMcs_Proc}, {"HtGi", Show_HtGi_Proc}, @@ -195,7 +190,6 @@ static struct { {"HtRdg", Show_HtRdg_Proc}, {"HtAmsdu", Show_HtAmsdu_Proc}, {"HtAutoBa", Show_HtAutoBa_Proc}, -#endif // DOT11_N_SUPPORT // {"CountryRegion", Show_CountryRegion_Proc}, {"CountryRegionABand", Show_CountryRegionABand_Proc}, {"CountryCode", Show_CountryCode_Proc}, @@ -207,9 +201,7 @@ static struct { {"WmmCapable", Show_WmmCapable_Proc}, #endif {"IEEE80211H", Show_IEEE80211H_Proc}, -#ifdef CONFIG_STA_SUPPORT {"NetworkType", Show_NetworkType_Proc}, -#endif // CONFIG_STA_SUPPORT // {"AuthMode", Show_AuthMode_Proc}, {"EncrypType", Show_EncrypType_Proc}, {"DefaultKeyID", Show_DefaultKeyID_Proc}, @@ -233,11 +225,7 @@ INT Set_DriverVersion_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION)); -#endif // CONFIG_STA_SUPPORT // + DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION)); return TRUE; } @@ -259,10 +247,6 @@ INT Set_CountryRegion_Proc( region = simple_strtol(arg, 0, 10); -#ifdef EXT_BUILD_CHANNEL_LIST - return -EOPNOTSUPP; -#endif // EXT_BUILD_CHANNEL_LIST // - // Country can be set only when EEPROM not programmed if (pAd->CommonCfg.CountryRegion & 0x80) { @@ -309,10 +293,6 @@ INT Set_CountryRegionABand_Proc( region = simple_strtol(arg, 0, 10); -#ifdef EXT_BUILD_CHANNEL_LIST - return -EOPNOTSUPP; -#endif // EXT_BUILD_CHANNEL_LIST // - // Country can be set only when EEPROM not programmed if (pAd->CommonCfg.CountryRegionForABand & 0x80) { @@ -355,20 +335,15 @@ INT Set_WirelessMode_Proc( WirelessMode = simple_strtol(arg, 0, 10); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { INT MaxPhyMode = PHY_11G; -#ifdef DOT11_N_SUPPORT MaxPhyMode = PHY_11N_5G; -#endif // DOT11_N_SUPPORT // if (WirelessMode <= MaxPhyMode) { RTMPSetPhyMode(pAd, WirelessMode); -#ifdef DOT11_N_SUPPORT + if (WirelessMode >= PHY_11ABGN_MIXED) { pAd->CommonCfg.BACapability.field.AutoBA = TRUE; @@ -379,7 +354,7 @@ INT Set_WirelessMode_Proc( pAd->CommonCfg.BACapability.field.AutoBA = FALSE; pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE; } -#endif // DOT11_N_SUPPORT // + // Set AdhocMode rates if (pAd->StaCfg.BssType == BSS_ADHOC) { @@ -393,14 +368,11 @@ INT Set_WirelessMode_Proc( success = FALSE; } } -#endif // CONFIG_STA_SUPPORT // // it is needed to set SSID to take effect if (success == TRUE) { -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode)); } else @@ -431,14 +403,11 @@ INT Set_Channel_Proc( // check if this channel is valid if (ChannelSanity(pAd, Channel) == TRUE) { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pAd->CommonCfg.Channel = Channel; if (MONITOR_ON(pAd)) { -#ifdef DOT11_N_SUPPORT N_ChannelCheck(pAd); if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED && pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40) @@ -450,7 +419,6 @@ INT Set_Channel_Proc( pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel)); } else -#endif // DOT11_N_SUPPORT // { AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); @@ -458,16 +426,11 @@ INT Set_Channel_Proc( } } } -#endif // CONFIG_STA_SUPPORT // success = TRUE; } else { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - success = FALSE; -#endif // CONFIG_STA_SUPPORT // + success = FALSE; } @@ -523,14 +486,10 @@ INT Set_TxPower_Proc( TxPower = (ULONG) simple_strtol(arg, 0, 10); if (TxPower <= 100) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pAd->CommonCfg.TxPowerDefault = TxPower; pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault; } -#endif // CONFIG_STA_SUPPORT // success = TRUE; } else @@ -595,22 +554,16 @@ INT Set_TxPreamble_Proc( { case Rt802_11PreambleShort: pAd->CommonCfg.TxPreamble = Preamble; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - MlmeSetTxPreamble(pAd, Rt802_11PreambleShort); -#endif // CONFIG_STA_SUPPORT // + + MlmeSetTxPreamble(pAd, Rt802_11PreambleShort); break; case Rt802_11PreambleLong: -#ifdef CONFIG_STA_SUPPORT case Rt802_11PreambleAuto: // if user wants AUTO, initialize to LONG here, then change according to AP's // capability upon association. -#endif // CONFIG_STA_SUPPORT // pAd->CommonCfg.TxPreamble = Preamble; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - MlmeSetTxPreamble(pAd, Rt802_11PreambleLong); -#endif // CONFIG_STA_SUPPORT // + + MlmeSetTxPreamble(pAd, Rt802_11PreambleLong); break; default: //Invalid argument return FALSE; @@ -639,10 +592,8 @@ INT Set_RTSThreshold_Proc( if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD)) pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh; -#ifdef CONFIG_STA_SUPPORT else if (RtsThresh == 0) pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD; -#endif // CONFIG_STA_SUPPORT // else return FALSE; //Invalid argument @@ -683,15 +634,12 @@ INT Set_FragThreshold_Proc( pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh; } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD) pAd->CommonCfg.bUseZeroToDisableFragment = TRUE; else pAd->CommonCfg.bUseZeroToDisableFragment = FALSE; } -#endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold)); @@ -814,6 +762,7 @@ INT Show_DescInfo_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) { +#ifdef RT2860 INT i, QueIdx=0; PRT28XX_RXD_STRUC pRxD; PTXD_STRUC pTxD; @@ -844,7 +793,7 @@ INT Show_DescInfo_Proc( hex_dump("Rx Descriptor", (char *)pRxD, 16); printk("pRxD->DDONE = %x\n", pRxD->DDONE); } - +#endif /* RT2860 */ return TRUE; } @@ -912,7 +861,6 @@ BOOLEAN RTMPCheckStrPrintAble( ======================================================================== */ -#ifdef CONFIG_STA_SUPPORT VOID RTMPSetDesiredRates( IN PRTMP_ADAPTER pAdapter, IN LONG Rates) @@ -1125,10 +1073,7 @@ NDIS_STATUS RTMPWPARemoveKeyProc( return (Status); } -#endif // CONFIG_STA_SUPPORT // - -#ifdef CONFIG_STA_SUPPORT /* ======================================================================== @@ -1178,7 +1123,6 @@ VOID RTMPWPARemoveAllKeys( } } -#endif // CONFIG_STA_SUPPORT // /* ======================================================================== @@ -1202,19 +1146,11 @@ VOID RTMPSetPhyMode( INT i; // the selected phymode must be supported by the RF IC encoded in E2PROM - // if no change, do nothing - /* bug fix - if (pAd->CommonCfg.PhyMode == phymode) - return; - */ pAd->CommonCfg.PhyMode = (UCHAR)phymode; DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel)); -#ifdef EXT_BUILD_CHANNEL_LIST - BuildChannelListEx(pAd); -#else + BuildChannelList(pAd); -#endif // EXT_BUILD_CHANNEL_LIST // // sanity check user setting for (i = 0; i < pAd->ChannelListNum; i++) @@ -1225,10 +1161,7 @@ VOID RTMPSetPhyMode( if (i == pAd->ChannelListNum) { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - pAd->CommonCfg.Channel = FirstChannel(pAd); -#endif // CONFIG_STA_SUPPORT // + pAd->CommonCfg.Channel = FirstChannel(pAd); DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel)); } @@ -1253,12 +1186,10 @@ VOID RTMPSetPhyMode( case PHY_11G: case PHY_11BG_MIXED: case PHY_11ABG_MIXED: -#ifdef DOT11_N_SUPPORT case PHY_11N_2_4G: case PHY_11ABGN_MIXED: case PHY_11BGN_MIXED: case PHY_11GN_MIXED: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate @@ -1288,11 +1219,9 @@ VOID RTMPSetPhyMode( break; case PHY_11A: -#ifdef DOT11_N_SUPPORT case PHY_11AN_MIXED: case PHY_11AGN_MIXED: case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate @@ -1322,8 +1251,6 @@ VOID RTMPSetPhyMode( pAd->CommonCfg.BandState = UNKNOWN_BAND; } - -#ifdef DOT11_N_SUPPORT /* ======================================================================== Routine Description: @@ -1492,6 +1419,16 @@ VOID RTMPSetHT( pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0; } +#ifndef RT30xx +#ifdef RT2870 + /* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/ + if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) + { + pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0; + pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0; + } +#endif // RT2870 // +#endif if(pHTPhyMode->SHORTGI == GI_400) { @@ -1539,14 +1476,7 @@ VOID RTMPSetHT( } AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - RTMPSetIndividualHT(pAd, 0); - } -#endif // CONFIG_STA_SUPPORT // - + RTMPSetIndividualHT(pAd, 0); } /* @@ -1571,16 +1501,12 @@ VOID RTMPSetIndividualHT( do { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo; DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS; //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE; break; } -#endif // CONFIG_STA_SUPPORT // } while (FALSE); if (pDesired_ht_phy == NULL) @@ -1710,7 +1636,6 @@ VOID RTMPUpdateHTIE( DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n")); } -#endif // DOT11_N_SUPPORT // /* ======================================================================== @@ -1732,8 +1657,6 @@ VOID RTMPAddWcidAttributeEntry( USHORT Wcid = 0; { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (BssIdx > BSS0) { @@ -1748,39 +1671,22 @@ VOID RTMPAddWcidAttributeEntry( Wcid = pEntry->Aid; else if (pEntry && INFRA_ON(pAd)) { -#ifdef QOS_DLS_SUPPORT - if (pEntry->ValidAsDls == TRUE) - Wcid = pEntry->Aid; - else -#endif // QOS_DLS_SUPPORT // Wcid = BSSID_WCID; } else Wcid = MCAST_WCID; } -#endif // CONFIG_STA_SUPPORT // } // Update WCID attribute table offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pEntry && pEntry->ValidAsMesh) WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE; -#ifdef QOS_DLS_SUPPORT - else if ((pEntry) && (pEntry->ValidAsDls) && - ((CipherAlg == CIPHER_TKIP) || - (CipherAlg == CIPHER_TKIP_NO_MIC) || - (CipherAlg == CIPHER_AES) || - (CipherAlg == CIPHER_NONE))) - WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE; -#endif // QOS_DLS_SUPPORT // else WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE; } -#endif // CONFIG_STA_SUPPORT // RTMP_IO_WRITE32(pAd, offset, WCIDAttri); @@ -1801,7 +1707,12 @@ VOID RTMPAddWcidAttributeEntry( } // For key index and ext IV bit, so only need to update the position(offset+3). +#ifdef RT2860 RTMP_IO_WRITE8(pAd, offset+3, IVEIV); +#endif +#ifdef RT2870 + RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV); +#endif // RT2870 // DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg])); DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri)); @@ -1864,7 +1775,6 @@ CHAR *GetAuthMode(CHAR auth) return "UNKNOW"; } -#if 1 //#ifndef UCOS /* ========================================================================== Description: @@ -1912,11 +1822,10 @@ VOID RTMPIoctlGetSiteSurvey( "Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT"); WaitCnt = 0; -#ifdef CONFIG_STA_SUPPORT pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE; + while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200)) OS_WAIT(500); -#endif // CONFIG_STA_SUPPORT // for(i=0; i<pAdapter->ScanTab.BssNr ;i++) { @@ -1982,9 +1891,7 @@ VOID RTMPIoctlGetSiteSurvey( sprintf(msg+strlen(msg),"\n"); } -#ifdef CONFIG_STA_SUPPORT pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE; -#endif // CONFIG_STA_SUPPORT // wrq->u.data.length = strlen(msg); Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length); @@ -2010,9 +1917,7 @@ VOID RTMPIoctlGetMacTable( COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr); MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid; MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode; -#ifdef DOT11_N_SUPPORT MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode; -#endif // DOT11_N_SUPPORT // // Fill in RSSI per entry MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0; @@ -2072,9 +1977,7 @@ VOID RTMPIoctlGetMacTable( kfree(msg); } -#endif // UCOS // -#ifdef DOT11_N_SUPPORT INT Set_BASetup_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) @@ -2089,7 +1992,6 @@ INT Set_BASetup_Proc( =>The six 2 digit hex-decimal number previous are the Mac address, =>The seventh decimal number is the tid value. */ - //printk("\n%s\n", arg); if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format. return FALSE; @@ -2283,9 +2185,7 @@ INT Set_HtMcs_Proc( IN PUCHAR arg) { ULONG HtMcs, Mcs_tmp; -#ifdef CONFIG_STA_SUPPORT BOOLEAN bAutoRate = FALSE; -#endif // CONFIG_STA_SUPPORT // Mcs_tmp = simple_strtol(arg, 0, 10); @@ -2294,8 +2194,6 @@ INT Set_HtMcs_Proc( else HtMcs = MCS_AUTO; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs; pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE; @@ -2330,7 +2228,6 @@ INT Set_HtMcs_Proc( if (ADHOC_ON(pAd)) return TRUE; } -#endif // CONFIG_STA_SUPPORT // SetCommonHT(pAd); @@ -2592,13 +2489,26 @@ INT Set_HtAutoBa_Proc( Value = simple_strtol(arg, 0, 10); if (Value == 0) + { pAd->CommonCfg.BACapability.field.AutoBA = FALSE; +#ifdef RT30xx + pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE; +#endif + } else if (Value == 1) + { pAd->CommonCfg.BACapability.field.AutoBA = TRUE; +#ifdef RT30xx + pAd->CommonCfg.BACapability.field.Policy = IMMED_BA; +#endif + } else return FALSE; //Invalid argument pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA; +#ifdef RT30xx + pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy; +#endif SetCommonHT(pAd); DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA)); @@ -2762,10 +2672,7 @@ INT Set_HtMimoPs_Proc( return TRUE; } -#endif // DOT11_N_SUPPORT // - -#ifdef DOT11_N_SUPPORT INT SetCommonHT( IN PRTMP_ADAPTER pAd) { @@ -2787,7 +2694,6 @@ INT SetCommonHT( return TRUE; } -#endif // DOT11_N_SUPPORT // INT Set_FixedTxMode_Proc( IN PRTMP_ADAPTER pAd, @@ -2804,45 +2710,13 @@ INT Set_FixedTxMode_Proc( fix_tx_mode = FIXED_TXMODE_CCK; } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode; -#endif // CONFIG_STA_SUPPORT // + pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode; DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode)); return TRUE; } -#ifdef CONFIG_APSTA_MIXED_SUPPORT -INT Set_OpMode_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) - { - DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n")); - return FALSE; - } - - if (Value == 0) - pAd->OpMode = OPMODE_STA; - else if (Value == 1) - pAd->OpMode = OPMODE_AP; - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_OpMode_Proc::(OpMode=%s)\n", pAd->OpMode == 1 ? "AP Mode" : "STA Mode")); - - return TRUE; -} -#endif // CONFIG_APSTA_MIXED_SUPPORT // - - ///////////////////////////////////////////////////////////////////////// PCHAR RTMPGetRalinkAuthModeStr( IN NDIS_802_11_AUTHENTICATION_MODE authMode) @@ -2851,7 +2725,9 @@ PCHAR RTMPGetRalinkAuthModeStr( { case Ndis802_11AuthModeOpen: return "OPEN"; +#if defined(RT2860) || defined(RT30xx) default: +#endif case Ndis802_11AuthModeWPAPSK: return "WPAPSK"; case Ndis802_11AuthModeShared: @@ -2866,8 +2742,14 @@ PCHAR RTMPGetRalinkAuthModeStr( return "WPAPSKWPA2PSK"; case Ndis802_11AuthModeWPA1WPA2: return "WPA1WPA2"; +#ifndef RT30xx case Ndis802_11AuthModeWPANone: return "WPANONE"; +#ifdef RT2870 + default: + return "UNKNOW"; +#endif +#endif } } @@ -2876,7 +2758,9 @@ PCHAR RTMPGetRalinkEncryModeStr( { switch(encryMode) { +#if defined(RT2860) || defined(RT30xx) default: +#endif case Ndis802_11WEPDisabled: return "NONE"; case Ndis802_11WEPEnabled: @@ -2887,6 +2771,10 @@ PCHAR RTMPGetRalinkEncryModeStr( return "AES"; case Ndis802_11Encryption4Enabled: return "TKIPAES"; +#if !defined(RT2860) && !defined(RT30xx) + default: + return "UNKNOW"; +#endif } } @@ -2911,7 +2799,7 @@ INT RTMPShowCfgValue( { sprintf(pBuf, "\n"); for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++) - sprintf(pBuf, "%s%s\n", pBuf, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name); + sprintf(pBuf + strlen(pBuf), "%s\n", PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name); } return Status; @@ -2921,11 +2809,7 @@ INT Show_SSID_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid); -#endif // CONFIG_STA_SUPPORT // + sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid); return 0; } @@ -2950,7 +2834,6 @@ INT Show_WirelessMode_Proc( case PHY_11G: sprintf(pBuf, "\t11G"); break; -#ifdef DOT11_N_SUPPORT case PHY_11ABGN_MIXED: sprintf(pBuf, "\t11A/B/G/N"); break; @@ -2972,7 +2855,6 @@ INT Show_WirelessMode_Proc( case PHY_11N_5G: sprintf(pBuf, "\t11N only with 5G"); break; -#endif // DOT11_N_SUPPORT // default: sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode); break; @@ -3066,7 +2948,6 @@ INT Show_FragThreshold_Proc( return 0; } -#ifdef DOT11_N_SUPPORT INT Show_HtBw_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) @@ -3086,11 +2967,7 @@ INT Show_HtMcs_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS); -#endif // CONFIG_STA_SUPPORT // + sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS); return 0; } @@ -3191,7 +3068,6 @@ INT Show_HtAutoBa_Proc( sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE"); return 0; } -#endif // DOT11_N_SUPPORT // INT Show_CountryRegion_Proc( IN PRTMP_ADAPTER pAd, @@ -3232,11 +3108,7 @@ INT Show_WmmCapable_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE"); -#endif // CONFIG_STA_SUPPORT // + sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE"); return 0; } @@ -3250,7 +3122,6 @@ INT Show_IEEE80211H_Proc( return 0; } -#ifdef CONFIG_STA_SUPPORT INT Show_NetworkType_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) @@ -3275,7 +3146,6 @@ INT Show_NetworkType_Proc( } return 0; } -#endif // CONFIG_STA_SUPPORT // INT Show_AuthMode_Proc( IN PRTMP_ADAPTER pAd, @@ -3283,10 +3153,7 @@ INT Show_AuthMode_Proc( { NDIS_802_11_AUTHENTICATION_MODE AuthMode = Ndis802_11AuthModeOpen; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - AuthMode = pAd->StaCfg.AuthMode; -#endif // CONFIG_STA_SUPPORT // + AuthMode = pAd->StaCfg.AuthMode; if ((AuthMode >= Ndis802_11AuthModeOpen) && (AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK)) @@ -3303,10 +3170,7 @@ INT Show_EncrypType_Proc( { NDIS_802_11_WEP_STATUS WepStatus = Ndis802_11WEPDisabled; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - WepStatus = pAd->StaCfg.WepStatus; -#endif // CONFIG_STA_SUPPORT // + WepStatus = pAd->StaCfg.WepStatus; if ((WepStatus >= Ndis802_11WEPEnabled) && (WepStatus <= Ndis802_11Encryption4KeyAbsent)) @@ -3323,10 +3187,7 @@ INT Show_DefaultKeyID_Proc( { UCHAR DefaultKeyId = 0; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - DefaultKeyId = pAd->StaCfg.DefaultKeyId; -#endif // CONFIG_STA_SUPPORT // + DefaultKeyId = pAd->StaCfg.DefaultKeyId; sprintf(pBuf, "\t%d", DefaultKeyId); @@ -3396,11 +3257,7 @@ INT Show_WPAPSK_Proc( INT idx; UCHAR PMK[32] = {0}; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32); -#endif // CONFIG_STA_SUPPORT // + NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32); sprintf(pBuf, "\tPMK = "); for (idx = 0; idx < 32; idx++) diff --git a/drivers/staging/rt2860/common/cmm_sanity.c b/drivers/staging/rt2860/common/cmm_sanity.c index b0f070d43135..843e44e41abe 100644 --- a/drivers/staging/rt2860/common/cmm_sanity.c +++ b/drivers/staging/rt2860/common/cmm_sanity.c @@ -275,9 +275,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity( OUT PQOS_CAPABILITY_PARM pQosCapability, OUT ULONG *pRalinkIe, OUT UCHAR *pHtCapabilityLen, -#ifdef CONFIG_STA_SUPPORT OUT UCHAR *pPreNHtCapabilityLen, -#endif // CONFIG_STA_SUPPORT // OUT HT_CAPABILITY_IE *pHtCapability, OUT UCHAR *AddHtInfoLen, OUT ADD_HT_INFO_IE *AddHtInfo, @@ -286,9 +284,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity( OUT PNDIS_802_11_VARIABLE_IEs pVIE) { CHAR *Ptr; -#ifdef CONFIG_STA_SUPPORT CHAR TimLen; -#endif // CONFIG_STA_SUPPORT // PFRAME_802_11 pFrame; PEID_STRUCT pEid; UCHAR SubType; @@ -316,10 +312,8 @@ BOOLEAN PeerBeaconAndProbeRspSanity( *pAironetCellPowerLimit = 0xFF; // Default of AironetCellPowerLimit is 0xFF *LengthVIE = 0; // Set the length of VIE to init value 0 *pHtCapabilityLen = 0; // Set the length of VIE to init value 0 -#ifdef CONFIG_STA_SUPPORT if (pAd->OpMode == OPMODE_STA) *pPreNHtCapabilityLen = 0; // Set the length of VIE to init value 0 -#endif // CONFIG_STA_SUPPORT // *AddHtInfoLen = 0; // Set the length of VIE to init value 0 *pRalinkIe = 0; *pNewChannel = 0; @@ -428,8 +422,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( *(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo)); *(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo)); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { *pPreNHtCapabilityLen = 0; // Nnow we only support 26 bytes. @@ -437,7 +429,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2); *LengthVIE += (pEid->Len + 2); } -#endif // CONFIG_STA_SUPPORT // } else { @@ -458,14 +449,11 @@ BOOLEAN PeerBeaconAndProbeRspSanity( *(USHORT *)(&AddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo2)); *(USHORT *)(&AddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo3)); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { Ptr = (PUCHAR) pVIE; NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2); *LengthVIE += (pEid->Len + 2); } -#endif // CONFIG_STA_SUPPORT // } else { @@ -492,8 +480,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity( if(pEid->Len == 1) { *pChannel = *pEid->Octet; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { if (ChannelSanity(pAd, *pChannel) == 0) { @@ -501,7 +488,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity( return FALSE; } } -#endif // CONFIG_STA_SUPPORT // + Sanity |= 0x4; } else @@ -539,14 +526,13 @@ BOOLEAN PeerBeaconAndProbeRspSanity( } break; -#ifdef CONFIG_STA_SUPPORT case IE_TIM: if(INFRA_ON(pAd) && SubType == SUBTYPE_BEACON) { GetTimBit((PUCHAR)pEid, pAd->StaActive.Aid, &TimLen, pBcastFlag, pDtimCount, pDtimPeriod, pMessageToMe); } break; -#endif // CONFIG_STA_SUPPORT // + case IE_CHANNEL_SWITCH_ANNOUNCEMENT: if(pEid->Len == 3) { @@ -568,8 +554,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( else *pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag. } -#ifdef CONFIG_STA_SUPPORT -#ifdef DOT11_N_SUPPORT // This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan. // Other vendors had production before IE_HT_CAP value is assigned. To backward support those old-firmware AP, @@ -588,8 +572,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( *AddHtInfoLen = SIZE_ADD_HT_INFO_IE; } } -#endif // DOT11_N_SUPPORT // -#endif // CONFIG_STA_SUPPORT // else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)) { // Copy to pVIE which will report to microsoft bssid list. @@ -712,15 +694,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( *LengthVIE += (pEid->Len + 2); } break; -#ifdef CONFIG_STA_SUPPORT -#ifdef EXT_BUILD_CHANNEL_LIST - case IE_COUNTRY: - Ptr = (PUCHAR) pVIE; - NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2); - *LengthVIE += (pEid->Len + 2); - break; -#endif // EXT_BUILD_CHANNEL_LIST // -#endif // CONFIG_STA_SUPPORT // default: break; @@ -731,8 +704,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( } // For some 11a AP. it did not have the channel EID, patch here -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { UCHAR LatchRfChannel = MsgChannel; if ((pAd->LatchRfRegs.Channel > 14) && ((Sanity & 0x4) == 0)) @@ -744,7 +715,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( Sanity |= 0x4; } } -#endif // CONFIG_STA_SUPPORT // if (Sanity != 0x7) { @@ -758,76 +728,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity( } -#ifdef DOT11N_DRAFT3 -/* - ========================================================================== - Description: - MLME message sanity check for some IE addressed in 802.11n d3.03. - Return: - TRUE if all parameters are OK, FALSE otherwise - - IRQL = DISPATCH_LEVEL - - ========================================================================== - */ -BOOLEAN PeerBeaconAndProbeRspSanity2( - IN PRTMP_ADAPTER pAd, - IN VOID *Msg, - IN ULONG MsgLen, - OUT UCHAR *RegClass) -{ - CHAR *Ptr; - PFRAME_802_11 pFrame; - PEID_STRUCT pEid; - ULONG Length = 0; - - pFrame = (PFRAME_802_11)Msg; - - *RegClass = 0; - Ptr = pFrame->Octet; - Length += LENGTH_802_11; - - // get timestamp from payload and advance the pointer - Ptr += TIMESTAMP_LEN; - Length += TIMESTAMP_LEN; - - // get beacon interval from payload and advance the pointer - Ptr += 2; - Length += 2; - - // get capability info from payload and advance the pointer - Ptr += 2; - Length += 2; - - pEid = (PEID_STRUCT) Ptr; - - // get variable fields from payload and advance the pointer - while ((Length + 2 + pEid->Len) <= MsgLen) - { - switch(pEid->Eid) - { - case IE_SUPP_REG_CLASS: - if(pEid->Len > 0) - { - *RegClass = *pEid->Octet; - } - else - { - DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAndProbeRspSanity - wrong IE_SSID (len=%d)\n",pEid->Len)); - return FALSE; - } - break; - } - - Length = Length + 2 + pEid->Len; // Eid[1] + Len[1]+ content[Len] - pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len); - } - - return TRUE; - -} -#endif // DOT11N_DRAFT3 // - /* ========================================================================== Description: @@ -855,10 +755,8 @@ BOOLEAN MlmeScanReqSanity( if ((*pBssType == BSS_INFRA || *pBssType == BSS_ADHOC || *pBssType == BSS_ANY) && (*pScanType == SCAN_ACTIVE || *pScanType == SCAN_PASSIVE -#ifdef CONFIG_STA_SUPPORT || *pScanType == SCAN_CISCO_PASSIVE || *pScanType == SCAN_CISCO_ACTIVE || *pScanType == SCAN_CISCO_CHANNEL_LOAD || *pScanType == SCAN_CISCO_NOISE -#endif // CONFIG_STA_SUPPORT // )) { return TRUE; @@ -940,9 +838,6 @@ BOOLEAN PeerAuthSanity( NdisMoveMemory(pStatus, &pFrame->Octet[4], 2); if ((*pAlg == Ndis802_11AuthModeOpen) -#ifdef LEAP_SUPPORT - || (*pAlg == CISCO_AuthModeLEAP) -#endif // LEAP_SUPPORT // ) { if (*pSeq == 1 || *pSeq == 2) @@ -1003,9 +898,6 @@ BOOLEAN MlmeAuthReqSanity( *pAlg = pInfo->Alg; if (((*pAlg == Ndis802_11AuthModeShared) ||(*pAlg == Ndis802_11AuthModeOpen) -#ifdef LEAP_SUPPORT - || (*pAlg == CISCO_AuthModeLEAP) -#endif // LEAP_SUPPORT // ) && ((*pAddr & 0x01) == 0)) { @@ -1344,290 +1236,3 @@ BOOLEAN PeerWpaMessageSanity( return TRUE; } - -#ifdef CONFIG_STA_SUPPORT -#ifdef QOS_DLS_SUPPORT -BOOLEAN MlmeDlsReqSanity( - IN PRTMP_ADAPTER pAd, - IN VOID *Msg, - IN ULONG MsgLen, - OUT PRT_802_11_DLS *pDLS, - OUT PUSHORT pReason) -{ - MLME_DLS_REQ_STRUCT *pInfo; - - pInfo = (MLME_DLS_REQ_STRUCT *)Msg; - - *pDLS = pInfo->pDLS; - *pReason = pInfo->Reason; - - return TRUE; -} -#endif // QOS_DLS_SUPPORT // -#endif // CONFIG_STA_SUPPORT // - -#ifdef QOS_DLS_SUPPORT -BOOLEAN PeerDlsReqSanity( - IN PRTMP_ADAPTER pAd, - IN VOID *Msg, - IN ULONG MsgLen, - OUT PUCHAR pDA, - OUT PUCHAR pSA, - OUT USHORT *pCapabilityInfo, - OUT USHORT *pDlsTimeout, - OUT UCHAR *pRatesLen, - OUT UCHAR Rates[], - OUT UCHAR *pHtCapabilityLen, - OUT HT_CAPABILITY_IE *pHtCapability) -{ - CHAR *Ptr; - PFRAME_802_11 Fr = (PFRAME_802_11)Msg; - PEID_STRUCT eid_ptr; - - // to prevent caller from using garbage output value - *pCapabilityInfo = 0; - *pDlsTimeout = 0; - *pHtCapabilityLen = 0; - - Ptr = Fr->Octet; - - // offset to destination MAC address (Category and Action field) - Ptr += 2; - - // get DA from payload and advance the pointer - NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN); - Ptr += MAC_ADDR_LEN; - - // get SA from payload and advance the pointer - NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN); - Ptr += MAC_ADDR_LEN; - - // get capability info from payload and advance the pointer - NdisMoveMemory(pCapabilityInfo, Ptr, 2); - Ptr += 2; - - // get capability info from payload and advance the pointer - NdisMoveMemory(pDlsTimeout, Ptr, 2); - Ptr += 2; - - // Category and Action field + DA + SA + capability + Timeout - eid_ptr = (PEID_STRUCT) &Fr->Octet[18]; - - while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((UCHAR*)Fr + MsgLen)) - { - switch(eid_ptr->Eid) - { - case IE_SUPP_RATES: - if ((eid_ptr->Len <= MAX_LEN_OF_SUPPORTED_RATES) && (eid_ptr->Len > 0)) - { - NdisMoveMemory(Rates, eid_ptr->Octet, eid_ptr->Len); - DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - IE_SUPP_RATES., Len=%d. Rates[0]=%x\n",eid_ptr->Len, Rates[0])); - DBGPRINT(RT_DEBUG_TRACE, ("Rates[1]=%x %x %x %x %x %x %x\n", Rates[1], Rates[2], Rates[3], Rates[4], Rates[5], Rates[6], Rates[7])); - *pRatesLen = eid_ptr->Len; - } - else - { - *pRatesLen = 8; - Rates[0] = 0x82; - Rates[1] = 0x84; - Rates[2] = 0x8b; - Rates[3] = 0x96; - Rates[4] = 0x12; - Rates[5] = 0x24; - Rates[6] = 0x48; - Rates[7] = 0x6c; - DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - wrong IE_SUPP_RATES., Len=%d\n",eid_ptr->Len)); - } - break; - - case IE_EXT_SUPP_RATES: - if (eid_ptr->Len + *pRatesLen <= MAX_LEN_OF_SUPPORTED_RATES) - { - NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, eid_ptr->Len); - *pRatesLen = (*pRatesLen) + eid_ptr->Len; - } - else - { - NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, MAX_LEN_OF_SUPPORTED_RATES - (*pRatesLen)); - *pRatesLen = MAX_LEN_OF_SUPPORTED_RATES; - } - break; - - case IE_HT_CAP: - if (eid_ptr->Len >= sizeof(HT_CAPABILITY_IE)) - { - NdisMoveMemory(pHtCapability, eid_ptr->Octet, sizeof(HT_CAPABILITY_IE)); - - *(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo)); - *(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo)); - *pHtCapabilityLen = sizeof(HT_CAPABILITY_IE); - - DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - IE_HT_CAP\n")); - } - else - { - DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsReqSanity - wrong IE_HT_CAP.eid_ptr->Len = %d\n", eid_ptr->Len)); - } - break; - - default: - break; - } - - eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len); - } - - return TRUE; -} - -BOOLEAN PeerDlsRspSanity( - IN PRTMP_ADAPTER pAd, - IN VOID *Msg, - IN ULONG MsgLen, - OUT PUCHAR pDA, - OUT PUCHAR pSA, - OUT USHORT *pCapabilityInfo, - OUT USHORT *pStatus, - OUT UCHAR *pRatesLen, - OUT UCHAR Rates[], - OUT UCHAR *pHtCapabilityLen, - OUT HT_CAPABILITY_IE *pHtCapability) -{ - CHAR *Ptr; - PFRAME_802_11 Fr = (PFRAME_802_11)Msg; - PEID_STRUCT eid_ptr; - - // to prevent caller from using garbage output value - *pStatus = 0; - *pCapabilityInfo = 0; - *pHtCapabilityLen = 0; - - Ptr = Fr->Octet; - - // offset to destination MAC address (Category and Action field) - Ptr += 2; - - // get status code from payload and advance the pointer - NdisMoveMemory(pStatus, Ptr, 2); - Ptr += 2; - - // get DA from payload and advance the pointer - NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN); - Ptr += MAC_ADDR_LEN; - - // get SA from payload and advance the pointer - NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN); - Ptr += MAC_ADDR_LEN; - - if (pStatus == 0) - { - // get capability info from payload and advance the pointer - NdisMoveMemory(pCapabilityInfo, Ptr, 2); - Ptr += 2; - } - - // Category and Action field + status code + DA + SA + capability - eid_ptr = (PEID_STRUCT) &Fr->Octet[18]; - - while (((UCHAR*)eid_ptr + eid_ptr->Len + 1) < ((UCHAR*)Fr + MsgLen)) - { - switch(eid_ptr->Eid) - { - case IE_SUPP_RATES: - if ((eid_ptr->Len <= MAX_LEN_OF_SUPPORTED_RATES) && (eid_ptr->Len > 0)) - { - NdisMoveMemory(Rates, eid_ptr->Octet, eid_ptr->Len); - DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - IE_SUPP_RATES., Len=%d. Rates[0]=%x\n",eid_ptr->Len, Rates[0])); - DBGPRINT(RT_DEBUG_TRACE, ("Rates[1]=%x %x %x %x %x %x %x\n", Rates[1], Rates[2], Rates[3], Rates[4], Rates[5], Rates[6], Rates[7])); - *pRatesLen = eid_ptr->Len; - } - else - { - *pRatesLen = 8; - Rates[0] = 0x82; - Rates[1] = 0x84; - Rates[2] = 0x8b; - Rates[3] = 0x96; - Rates[4] = 0x12; - Rates[5] = 0x24; - Rates[6] = 0x48; - Rates[7] = 0x6c; - DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - wrong IE_SUPP_RATES., Len=%d\n",eid_ptr->Len)); - } - break; - - case IE_EXT_SUPP_RATES: - if (eid_ptr->Len + *pRatesLen <= MAX_LEN_OF_SUPPORTED_RATES) - { - NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, eid_ptr->Len); - *pRatesLen = (*pRatesLen) + eid_ptr->Len; - } - else - { - NdisMoveMemory(&Rates[*pRatesLen], eid_ptr->Octet, MAX_LEN_OF_SUPPORTED_RATES - (*pRatesLen)); - *pRatesLen = MAX_LEN_OF_SUPPORTED_RATES; - } - break; - - case IE_HT_CAP: - if (eid_ptr->Len >= sizeof(HT_CAPABILITY_IE)) - { - NdisMoveMemory(pHtCapability, eid_ptr->Octet, sizeof(HT_CAPABILITY_IE)); - - *(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo)); - *(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo)); - *pHtCapabilityLen = sizeof(HT_CAPABILITY_IE); - - DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - IE_HT_CAP\n")); - } - else - { - DBGPRINT(RT_DEBUG_TRACE, ("PeerDlsRspSanity - wrong IE_HT_CAP.eid_ptr->Len = %d\n", eid_ptr->Len)); - } - break; - - default: - break; - } - - eid_ptr = (PEID_STRUCT)((UCHAR*)eid_ptr + 2 + eid_ptr->Len); - } - - return TRUE; -} - -BOOLEAN PeerDlsTearDownSanity( - IN PRTMP_ADAPTER pAd, - IN VOID *Msg, - IN ULONG MsgLen, - OUT PUCHAR pDA, - OUT PUCHAR pSA, - OUT USHORT *pReason) -{ - CHAR *Ptr; - PFRAME_802_11 Fr = (PFRAME_802_11)Msg; - - // to prevent caller from using garbage output value - *pReason = 0; - - Ptr = Fr->Octet; - - // offset to destination MAC address (Category and Action field) - Ptr += 2; - - // get DA from payload and advance the pointer - NdisMoveMemory(pDA, Ptr, MAC_ADDR_LEN); - Ptr += MAC_ADDR_LEN; - - // get SA from payload and advance the pointer - NdisMoveMemory(pSA, Ptr, MAC_ADDR_LEN); - Ptr += MAC_ADDR_LEN; - - // get reason code from payload and advance the pointer - NdisMoveMemory(pReason, Ptr, 2); - Ptr += 2; - - return TRUE; -} -#endif // QOS_DLS_SUPPORT // - diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c index d29e0b630e2e..a6e1b6ddfe57 100644 --- a/drivers/staging/rt2860/common/cmm_sync.c +++ b/drivers/staging/rt2860/common/cmm_sync.c @@ -95,9 +95,7 @@ VOID BuildChannelList( // if not 11a-only mode, channel list starts from 2.4Ghz band if ((pAd->CommonCfg.PhyMode != PHY_11A) -#ifdef DOT11_N_SUPPORT && (pAd->CommonCfg.PhyMode != PHY_11AN_MIXED) && (pAd->CommonCfg.PhyMode != PHY_11N_5G) -#endif // DOT11_N_SUPPORT // ) { switch (pAd->CommonCfg.CountryRegion & 0x7f) @@ -146,10 +144,8 @@ VOID BuildChannelList( } if ((pAd->CommonCfg.PhyMode == PHY_11A) || (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) -#ifdef DOT11_N_SUPPORT || (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11N_5G) -#endif // DOT11_N_SUPPORT // ) { switch (pAd->CommonCfg.CountryRegionForABand & 0x7f) @@ -383,33 +379,18 @@ VOID ScanNextChannel( NDIS_STATUS NStatus; ULONG FrameLen = 0; UCHAR SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0; -#ifdef CONFIG_STA_SUPPORT USHORT Status; PHEADER_802_11 pHdr80211; -#endif // CONFIG_STA_SUPPORT // UINT ScanTimeIn5gChannel = SHORT_CHANNEL_TIME; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (MONITOR_ON(pAd)) - return; - } -#endif // CONFIG_STA_SUPPORT // - -#ifdef RALINK_ATE - // Nothing to do in ATE mode. - if (ATE_ON(pAd)) + if (MONITOR_ON(pAd)) return; -#endif // RALINK_ATE // if (pAd->MlmeAux.Channel == 0) { if ((pAd->CommonCfg.BBPCurrentBW == BW_40) -#ifdef CONFIG_STA_SUPPORT && (INFRA_ON(pAd) || (pAd->OpMode == OPMODE_AP)) -#endif // CONFIG_STA_SUPPORT // ) { AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); @@ -427,8 +408,6 @@ VOID ScanNextChannel( DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr)); } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // // To prevent data lost. @@ -458,31 +437,35 @@ VOID ScanNextChannel( Status = MLME_SUCCESS; MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status); } -#endif // CONFIG_STA_SUPPORT // - RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); } +#ifdef RT2870 + else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA)) + { + pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE; + MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE); + } +#endif // RT2870 // else { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // BBP and RF are not accessible in PS mode, we has to wake them up first if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) +#ifdef RT2860 AsicForceWakeup(pAd, FROM_TX); - +#endif +#ifdef RT2870 + AsicForceWakeup(pAd, TRUE); +#endif // leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON if (pAd->StaCfg.Psm == PWR_SAVE) MlmeSetPsmBit(pAd, PWR_ACTIVE); } -#endif // CONFIG_STA_SUPPORT // AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE); AsicLockChannel(pAd, pAd->MlmeAux.Channel); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pAd->MlmeAux.Channel > 14) { @@ -492,19 +475,8 @@ VOID ScanNextChannel( ScanTimeIn5gChannel = MIN_CHANNEL_TIME; } } - -#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier - // carrier detection - if (pAd->CommonCfg.CarrierDetect.Enable == TRUE) - { - ScanType = SCAN_PASSIVE; - ScanTimeIn5gChannel = MIN_CHANNEL_TIME; - } -#endif // CARRIER_DETECTION_SUPPORT // } -#endif // CONFIG_STA_SUPPORT // - //Global country domain(ch1-11:active scan, ch12-14 passive scan) if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12) && ((pAd->CommonCfg.CountryRegion & 0x7f) == REGION_31_BG_BAND)) { @@ -515,7 +487,6 @@ VOID ScanNextChannel( // Chnage the channel scan time for CISCO stuff based on its IAPP announcement if (ScanType == FAST_SCAN_ACTIVE) RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME); -#ifdef CONFIG_STA_SUPPORT else if (((ScanType == SCAN_CISCO_ACTIVE) || (ScanType == SCAN_CISCO_PASSIVE) || (ScanType == SCAN_CISCO_CHANNEL_LOAD) || @@ -526,13 +497,10 @@ VOID ScanNextChannel( else RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime); } -#endif // CONFIG_STA_SUPPORT // else // must be SCAN_PASSIVE or SCAN_ACTIVE { if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) -#ifdef DOT11_N_SUPPORT || (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) -#endif // DOT11_N_SUPPORT // ) { if (pAd->MlmeAux.Channel > 14) @@ -551,14 +519,12 @@ VOID ScanNextChannel( if (NStatus != NDIS_STATUS_SUCCESS) { DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n")); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE; Status = MLME_FAIL_NO_RESOURCE; MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status); } -#endif // CONFIG_STA_SUPPORT // return; } @@ -592,78 +558,35 @@ VOID ScanNextChannel( FrameLen += Tmp; } -#ifdef DOT11_N_SUPPORT if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) { ULONG Tmp; UCHAR HtLen; UCHAR BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33}; -#ifdef RT_BIG_ENDIAN - HT_CAPABILITY_IE HtCapabilityTmp; -#endif + if (pAd->bBroadComHT == TRUE) { HtLen = pAd->MlmeAux.HtCapabilityLen + 4; -#ifdef RT_BIG_ENDIAN - NdisMoveMemory(&HtCapabilityTmp, &pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE); - *(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo)); - *(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo)); MakeOutgoingFrame(pOutBuffer + FrameLen, &Tmp, 1, &WpaIe, 1, &HtLen, 4, &BROADCOM[0], - pAd->MlmeAux.HtCapabilityLen, &HtCapabilityTmp, - END_OF_ARGS); -#else - MakeOutgoingFrame(pOutBuffer + FrameLen, &Tmp, - 1, &WpaIe, - 1, &HtLen, - 4, &BROADCOM[0], pAd->MlmeAux.HtCapabilityLen, &pAd->MlmeAux.HtCapability, END_OF_ARGS); -#endif // RT_BIG_ENDIAN // } else { HtLen = pAd->MlmeAux.HtCapabilityLen; -#ifdef RT_BIG_ENDIAN - NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, SIZE_HT_CAP_IE); - *(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo)); - *(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo)); MakeOutgoingFrame(pOutBuffer + FrameLen, &Tmp, 1, &HtCapIe, 1, &HtLen, - HtLen, &HtCapabilityTmp, - END_OF_ARGS); -#else - MakeOutgoingFrame(pOutBuffer + FrameLen, &Tmp, - 1, &HtCapIe, - 1, &HtLen, HtLen, &pAd->CommonCfg.HtCapability, END_OF_ARGS); -#endif // RT_BIG_ENDIAN // } FrameLen += Tmp; - -#ifdef DOT11N_DRAFT3 - if (pAd->CommonCfg.BACapability.field.b2040CoexistScanSup == 1) - { - ULONG Tmp; - HtLen = 1; - MakeOutgoingFrame(pOutBuffer + FrameLen, &Tmp, - 1, &ExtHtCapIe, - 1, &HtLen, - 1, &pAd->CommonCfg.BSSCoexist2040.word, - END_OF_ARGS); - - FrameLen += Tmp; - } -#endif // DOT11N_DRAFT3 // } -#endif // DOT11_N_SUPPORT // - MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen); MlmeFreeMemory(pAd, pOutBuffer); @@ -671,11 +594,7 @@ VOID ScanNextChannel( // For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN; -#endif // CONFIG_STA_SUPPORT // - + pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN; } } diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c index 69baf522fa01..bda69e76867e 100644 --- a/drivers/staging/rt2860/common/cmm_wpa.c +++ b/drivers/staging/rt2860/common/cmm_wpa.c @@ -39,10 +39,14 @@ // WPA OUI UCHAR OUI_WPA_NONE_AKM[4] = {0x00, 0x50, 0xF2, 0x00}; UCHAR OUI_WPA_VERSION[4] = {0x00, 0x50, 0xF2, 0x01}; +#ifndef RT30xx UCHAR OUI_WPA_WEP40[4] = {0x00, 0x50, 0xF2, 0x01}; +#endif UCHAR OUI_WPA_TKIP[4] = {0x00, 0x50, 0xF2, 0x02}; UCHAR OUI_WPA_CCMP[4] = {0x00, 0x50, 0xF2, 0x04}; +#ifndef RT30xx UCHAR OUI_WPA_WEP104[4] = {0x00, 0x50, 0xF2, 0x05}; +#endif UCHAR OUI_WPA_8021X_AKM[4] = {0x00, 0x50, 0xF2, 0x01}; UCHAR OUI_WPA_PSK_AKM[4] = {0x00, 0x50, 0xF2, 0x02}; // WPA2 OUI @@ -51,7 +55,9 @@ UCHAR OUI_WPA2_TKIP[4] = {0x00, 0x0F, 0xAC, 0x02}; UCHAR OUI_WPA2_CCMP[4] = {0x00, 0x0F, 0xAC, 0x04}; UCHAR OUI_WPA2_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x01}; UCHAR OUI_WPA2_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x02}; +#ifndef RT30xx UCHAR OUI_WPA2_WEP104[4] = {0x00, 0x0F, 0xAC, 0x05}; +#endif // MSA OUI UCHAR OUI_MSA_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x05}; // Not yet final - IEEE 802.11s-D1.06 UCHAR OUI_MSA_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x06}; // Not yet final - IEEE 802.11s-D1.06 @@ -370,7 +376,7 @@ static VOID RTMPInsertRsnIeCipher( break; } -#ifdef CONFIG_STA_SUPPORT +#ifndef RT30xx if ((pAd->OpMode == OPMODE_STA) && (pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) && (pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled)) @@ -386,8 +392,7 @@ static VOID RTMPInsertRsnIeCipher( break; } } -#endif // CONFIG_STA_SUPPORT // - +#endif // swap for big-endian platform pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version); pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount); @@ -448,7 +453,7 @@ static VOID RTMPInsertRsnIeCipher( break; } -#ifdef CONFIG_STA_SUPPORT +#ifndef RT30xx if ((pAd->OpMode == OPMODE_STA) && (pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) && (pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled)) @@ -464,8 +469,7 @@ static VOID RTMPInsertRsnIeCipher( break; } } -#endif // CONFIG_STA_SUPPORT // - +#endif // swap for big-endian platform pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version); pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount); @@ -621,23 +625,19 @@ VOID RTMPMakeRSNIE( UCHAR PrimaryRsnie; BOOLEAN bMixCipher = FALSE; // indicate the pairwise and group cipher are different UCHAR p_offset; - WPA_MIX_PAIR_CIPHER FlexibleCipher = MIX_CIPHER_NOTUSE; // it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode + WPA_MIX_PAIR_CIPHER FlexibleCipher = WPA_TKIPAES_WPA2_TKIPAES; // it provide the more flexible cipher combination in WPA-WPA2 and TKIPAES mode rsnielen_cur_p = NULL; rsnielen_ex_cur_p = NULL; { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef WPA_SUPPLICANT_SUPPORT if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) { if (AuthMode < Ndis802_11AuthModeWPA) return; } else -#endif // WPA_SUPPLICANT_SUPPORT // { // Support WPAPSK or WPA2PSK in STA-Infra mode // Support WPANone in STA-Adhoc mode @@ -660,7 +660,6 @@ VOID RTMPMakeRSNIE( bMixCipher = pAd->StaCfg.bMixCipher; } -#endif // CONFIG_STA_SUPPORT // } // indicate primary RSNIE as WPA or WPA2 @@ -1131,11 +1130,6 @@ BOOLEAN RTMPParseEapolKeyData( return FALSE; } - -#ifdef CONFIG_STA_SUPPORT - // Todo -#endif // CONFIG_STA_SUPPORT // - return TRUE; } diff --git a/drivers/staging/rt2860/common/dfs.c b/drivers/staging/rt2860/common/dfs.c index b09bba5cb206..23330f2661d9 100644 --- a/drivers/staging/rt2860/common/dfs.c +++ b/drivers/staging/rt2860/common/dfs.c @@ -80,18 +80,6 @@ VOID BbpRadarDetectionStart( RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 124, 0x28); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 125, 0xff); -#if 0 - // toggle Rx enable bit for radar detection. - // it's Andy's recommand. - { - UINT32 Value; - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value |= (0x1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - Value &= ~(0x1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - } -#endif RadarPeriod = ((UINT)RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + (UINT)pAd->CommonCfg.RadarDetect.DfsSessionTime) < 250 ? (RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + pAd->CommonCfg.RadarDetect.DfsSessionTime) : 250; @@ -314,15 +302,6 @@ ULONG RTMPReadRadarDuration( { ULONG result = 0; -#ifdef DFS_SUPPORT - UINT8 duration1 = 0, duration2 = 0, duration3 = 0; - - BBP_IO_READ8_BY_REG_ID(pAd, BBP_R116, &duration1); - BBP_IO_READ8_BY_REG_ID(pAd, BBP_R117, &duration2); - BBP_IO_READ8_BY_REG_ID(pAd, BBP_R118, &duration3); - result = (duration1 << 16) + (duration2 << 8) + duration3; -#endif // DFS_SUPPORT // - return result; } diff --git a/drivers/staging/rt2860/common/eeprom.c b/drivers/staging/rt2860/common/eeprom.c index bed2d666629c..9729323baca5 100644 --- a/drivers/staging/rt2860/common/eeprom.c +++ b/drivers/staging/rt2860/common/eeprom.c @@ -73,12 +73,16 @@ USHORT ShiftInBits( RaiseClock(pAd, &x); RTMP_IO_READ32(pAd, E2PROM_CSR, &x); - +#ifdef RT30xx + LowerClock(pAd, &x); //prevent read failed +#endif x &= ~(EEDI); if(x & EEDO) data |= 1; +#ifndef RT30xx LowerClock(pAd, &x); +#endif } return data; @@ -181,6 +185,15 @@ USHORT RTMP_EEPROM_READ16( UINT32 x; USHORT data; +#ifdef RT30xx + if (pAd->NicConfig2.field.AntDiversity) + { + pAd->EepromAccess = TRUE; + } +//2008/09/11:KH add to support efuse<-- +//2008/09/11:KH add to support efuse--> +{ +#endif Offset /= 2; // reset bits and set EECS RTMP_IO_READ32(pAd, E2PROM_CSR, &x); @@ -188,9 +201,17 @@ USHORT RTMP_EEPROM_READ16( x |= EECS; RTMP_IO_WRITE32(pAd, E2PROM_CSR, x); +#ifdef RT30xx + // patch can not access e-Fuse issue + if (!IS_RT3090(pAd)) + { +#endif // kick a pulse RaiseClock(pAd, &x); LowerClock(pAd, &x); +#ifdef RT30xx + } +#endif // output the read_opcode and register number in that order ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3); @@ -201,6 +222,17 @@ USHORT RTMP_EEPROM_READ16( EEpromCleanup(pAd); +#ifdef RT30xx + // Antenna and EEPROM access are both using EESK pin, + // Therefor we should avoid accessing EESK at the same time + // Then restore antenna after EEPROM access + if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020)) + { + pAd->EepromAccess = FALSE; + AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); + } +} +#endif return data; } //ReadEEprom @@ -211,6 +243,15 @@ VOID RTMP_EEPROM_WRITE16( { UINT32 x; +#ifdef RT30xx + if (pAd->NicConfig2.field.AntDiversity) + { + pAd->EepromAccess = TRUE; + } + //2008/09/11:KH add to support efuse<-- +//2008/09/11:KH add to support efuse--> + { +#endif Offset /= 2; EWEN(pAd); @@ -221,9 +262,17 @@ VOID RTMP_EEPROM_WRITE16( x |= EECS; RTMP_IO_WRITE32(pAd, E2PROM_CSR, x); +#ifdef RT30xx + // patch can not access e-Fuse issue + if (!IS_RT3090(pAd)) + { +#endif // kick a pulse RaiseClock(pAd, &x); LowerClock(pAd, &x); +#ifdef RT30xx + } +#endif // output the read_opcode ,register number and data in that order ShiftOutBits(pAd, EEPROM_WRITE_OPCODE, 3); @@ -240,5 +289,1222 @@ VOID RTMP_EEPROM_WRITE16( EWDS(pAd); EEpromCleanup(pAd); + +#ifdef RT30xx + // Antenna and EEPROM access are both using EESK pin, + // Therefor we should avoid accessing EESK at the same time + // Then restore antenna after EEPROM access + if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020)) + { + pAd->EepromAccess = FALSE; + AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); + } +} +#endif +} + +//2008/09/11:KH add to support efuse<-- +#ifdef RT30xx +/* + ======================================================================== + + Routine Description: + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +UCHAR eFuseReadRegisters( + IN PRTMP_ADAPTER pAd, + IN USHORT Offset, + IN USHORT Length, + OUT USHORT* pData) +{ + EFUSE_CTRL_STRUC eFuseCtrlStruc; + int i; + USHORT efuseDataOffset; + UINT32 data; + + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + + //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. + //Use the eeprom logical address and covert to address to block number + eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0; + + //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 0. + eFuseCtrlStruc.field.EFSROM_MODE = 0; + + //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure. + eFuseCtrlStruc.field.EFSROM_KICK = 1; + + NdisMoveMemory(&data, &eFuseCtrlStruc, 4); + RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data); + + //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. + i = 0; + while(i < 100) + { + //rtmp.HwMemoryReadDword(EFUSE_CTRL, (DWORD *) &eFuseCtrlStruc, 4); + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + if(eFuseCtrlStruc.field.EFSROM_KICK == 0) + { + break; + } + RTMPusecDelay(2); + i++; + } + + //if EFSROM_AOUT is not found in physical address, write 0xffff + if (eFuseCtrlStruc.field.EFSROM_AOUT == 0x3f) + { + for(i=0; i<Length/2; i++) + *(pData+2*i) = 0xffff; + } + else + { + //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x590-0x59C) + efuseDataOffset = EFUSE_DATA3 - (Offset & 0xC) ; + //data hold 4 bytes data. + //In RTMP_IO_READ32 will automatically execute 32-bytes swapping + RTMP_IO_READ32(pAd, efuseDataOffset, &data); + //Decide the upper 2 bytes or the bottom 2 bytes. + // Little-endian S | S Big-endian + // addr 3 2 1 0 | 0 1 2 3 + // Ori-V D C B A | A B C D + //After swapping + // D C B A | D C B A + //Return 2-bytes + //The return byte statrs from S. Therefore, the little-endian will return BA, the Big-endian will return DC. + //For returning the bottom 2 bytes, the Big-endian should shift right 2-bytes. + data = data >> (8*(Offset & 0x3)); + + NdisMoveMemory(pData, &data, Length); + } + + return (UCHAR) eFuseCtrlStruc.field.EFSROM_AOUT; + +} + +/* + ======================================================================== + + Routine Description: + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +VOID eFusePhysicalReadRegisters( + IN PRTMP_ADAPTER pAd, + IN USHORT Offset, + IN USHORT Length, + OUT USHORT* pData) +{ + EFUSE_CTRL_STRUC eFuseCtrlStruc; + int i; + USHORT efuseDataOffset; + UINT32 data; + + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + + //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. + eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0; + + //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1. + //Read in physical view + eFuseCtrlStruc.field.EFSROM_MODE = 1; + + //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure. + eFuseCtrlStruc.field.EFSROM_KICK = 1; + + NdisMoveMemory(&data, &eFuseCtrlStruc, 4); + RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data); + + //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. + i = 0; + while(i < 100) + { + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + if(eFuseCtrlStruc.field.EFSROM_KICK == 0) + break; + RTMPusecDelay(2); + i++; + } + + //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590) + //Because the size of each EFUSE_DATA is 4 Bytes, the size of address of each is 2 bits. + //The previous 2 bits is the EFUSE_DATA number, the last 2 bits is used to decide which bytes + //Decide which EFUSE_DATA to read + //590:F E D C + //594:B A 9 8 + //598:7 6 5 4 + //59C:3 2 1 0 + efuseDataOffset = EFUSE_DATA3 - (Offset & 0xC) ; + + RTMP_IO_READ32(pAd, efuseDataOffset, &data); + + data = data >> (8*(Offset & 0x3)); + + NdisMoveMemory(pData, &data, Length); + +} + +/* + ======================================================================== + + Routine Description: + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +VOID eFuseReadPhysical( + IN PRTMP_ADAPTER pAd, + IN PUSHORT lpInBuffer, + IN ULONG nInBufferSize, + OUT PUSHORT lpOutBuffer, + IN ULONG nOutBufferSize +) +{ + USHORT* pInBuf = (USHORT*)lpInBuffer; + USHORT* pOutBuf = (USHORT*)lpOutBuffer; + + USHORT Offset = pInBuf[0]; //addr + USHORT Length = pInBuf[1]; //length + int i; + + for(i=0; i<Length; i+=2) + { + eFusePhysicalReadRegisters(pAd,Offset+i, 2, &pOutBuf[i/2]); + } +} + +/* + ======================================================================== + + Routine Description: + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +NTSTATUS eFuseRead( + IN PRTMP_ADAPTER pAd, + IN USHORT Offset, + OUT PUCHAR pData, + IN USHORT Length) +{ + USHORT* pOutBuf = (USHORT*)pData; + NTSTATUS Status = STATUS_SUCCESS; + UCHAR EFSROM_AOUT; + int i; + + for(i=0; i<Length; i+=2) + { + EFSROM_AOUT = eFuseReadRegisters(pAd, Offset+i, 2, &pOutBuf[i/2]); + } + return Status; +} + +/* + ======================================================================== + + Routine Description: + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +VOID eFusePhysicalWriteRegisters( + IN PRTMP_ADAPTER pAd, + IN USHORT Offset, + IN USHORT Length, + OUT USHORT* pData) +{ + EFUSE_CTRL_STRUC eFuseCtrlStruc; + int i; + USHORT efuseDataOffset; + UINT32 data, eFuseDataBuffer[4]; + + //Step0. Write 16-byte of data to EFUSE_DATA0-3 (0x590-0x59C), where EFUSE_DATA0 is the LSB DW, EFUSE_DATA3 is the MSB DW. + + ///////////////////////////////////////////////////////////////// + //read current values of 16-byte block + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + + //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. + eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0; + + //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1. + eFuseCtrlStruc.field.EFSROM_MODE = 1; + + //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure. + eFuseCtrlStruc.field.EFSROM_KICK = 1; + + NdisMoveMemory(&data, &eFuseCtrlStruc, 4); + RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data); + + //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. + i = 0; + while(i < 100) + { + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + + if(eFuseCtrlStruc.field.EFSROM_KICK == 0) + break; + RTMPusecDelay(2); + i++; + } + + //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590) + efuseDataOffset = EFUSE_DATA3; + for(i=0; i< 4; i++) + { + RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &eFuseDataBuffer[i]); + efuseDataOffset -= 4; + } + + //Update the value, the offset is multiple of 2, length is 2 + efuseDataOffset = (Offset & 0xc) >> 2; + data = pData[0] & 0xffff; + //The offset should be 0x***10 or 0x***00 + if((Offset % 4) != 0) + { + eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff) | (data << 16); + } + else + { + eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff0000) | data; + } + + efuseDataOffset = EFUSE_DATA3; + for(i=0; i< 4; i++) + { + RTMP_IO_WRITE32(pAd, efuseDataOffset, eFuseDataBuffer[i]); + efuseDataOffset -= 4; + } + ///////////////////////////////////////////////////////////////// + + //Step1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. + eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0; + + //Step2. Write EFSROM_MODE (0x580, bit7:bit6) to 3. + eFuseCtrlStruc.field.EFSROM_MODE = 3; + + //Step3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure. + eFuseCtrlStruc.field.EFSROM_KICK = 1; + + NdisMoveMemory(&data, &eFuseCtrlStruc, 4); + RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data); + + //Step4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It��s done. + i = 0; + while(i < 100) + { + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + + if(eFuseCtrlStruc.field.EFSROM_KICK == 0) + break; + + RTMPusecDelay(2); + i++; + } +} + +/* + ======================================================================== + + Routine Description: + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +NTSTATUS eFuseWriteRegisters( + IN PRTMP_ADAPTER pAd, + IN USHORT Offset, + IN USHORT Length, + IN USHORT* pData) +{ + USHORT i; + USHORT eFuseData; + USHORT LogicalAddress, BlkNum = 0xffff; + UCHAR EFSROM_AOUT; + + USHORT addr,tmpaddr, InBuf[3], tmpOffset; + USHORT buffer[8]; + BOOLEAN bWriteSuccess = TRUE; + + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters Offset=%x, pData=%x\n", Offset, *pData)); + + //Step 0. find the entry in the mapping table + //The address of EEPROM is 2-bytes alignment. + //The last bit is used for alignment, so it must be 0. + tmpOffset = Offset & 0xfffe; + EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData); + + if( EFSROM_AOUT == 0x3f) + { //find available logical address pointer + //the logical address does not exist, find an empty one + //from the first address of block 45=16*45=0x2d0 to the last address of block 47 + //==>48*16-3(reserved)=2FC + for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2) + { + //Retrive the logical block nubmer form each logical address pointer + //It will access two logical address pointer each time. + eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress); + if( (LogicalAddress & 0xff) == 0) + {//Not used logical address pointer + BlkNum = i-EFUSE_USAGE_MAP_START; + break; + } + else if(( (LogicalAddress >> 8) & 0xff) == 0) + {//Not used logical address pointer + if (i != EFUSE_USAGE_MAP_END) + { + BlkNum = i-EFUSE_USAGE_MAP_START+1; + } + break; + } + } + } + else + { + BlkNum = EFSROM_AOUT; + } + + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum)); + + if(BlkNum == 0xffff) + { + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n")); + return FALSE; + } + + //Step 1. Save data of this block which is pointed by the avaible logical address pointer + // read and save the original block data + for(i =0; i<8; i++) + { + addr = BlkNum * 0x10 ; + + InBuf[0] = addr+2*i; + InBuf[1] = 2; + InBuf[2] = 0x0; + + eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2); + + buffer[i] = InBuf[2]; + } + + //Step 2. Update the data in buffer, and write the data to Efuse + buffer[ (Offset >> 1) % 8] = pData[0]; + + do + { + //Step 3. Write the data to Efuse + if(!bWriteSuccess) + { + for(i =0; i<8; i++) + { + addr = BlkNum * 0x10 ; + + InBuf[0] = addr+2*i; + InBuf[1] = 2; + InBuf[2] = buffer[i]; + + eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2); + } + } + else + { + addr = BlkNum * 0x10 ; + + InBuf[0] = addr+(Offset % 16); + InBuf[1] = 2; + InBuf[2] = pData[0]; + + eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2); + } + + //Step 4. Write mapping table + addr = EFUSE_USAGE_MAP_START+BlkNum; + + tmpaddr = addr; + + if(addr % 2 != 0) + addr = addr -1; + InBuf[0] = addr; + InBuf[1] = 2; + + //convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry + tmpOffset = Offset; + tmpOffset >>= 4; + tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^ (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01))) << 6) & 0x40; + tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80; + + // write the logical address + if(tmpaddr%2 != 0) + InBuf[2] = tmpOffset<<8; + else + InBuf[2] = tmpOffset; + + eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0); + + //Step 5. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted + bWriteSuccess = TRUE; + for(i =0; i<8; i++) + { + addr = BlkNum * 0x10 ; + + InBuf[0] = addr+2*i; + InBuf[1] = 2; + InBuf[2] = 0x0; + + eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2); + + if(buffer[i] != InBuf[2]) + { + bWriteSuccess = FALSE; + break; + } + } + + //Step 6. invlidate mapping entry and find a free mapping entry if not succeed + if (!bWriteSuccess) + { + DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess BlkNum = %d\n", BlkNum)); + + // the offset of current mapping entry + addr = EFUSE_USAGE_MAP_START+BlkNum; + + //find a new mapping entry + BlkNum = 0xffff; + for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2) + { + eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress); + if( (LogicalAddress & 0xff) == 0) + { + BlkNum = i-EFUSE_USAGE_MAP_START; + break; + } + else if(( (LogicalAddress >> 8) & 0xff) == 0) + { + if (i != EFUSE_USAGE_MAP_END) + { + BlkNum = i+1-EFUSE_USAGE_MAP_START; + } + break; + } + } + DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess new BlkNum = %d\n", BlkNum)); + if(BlkNum == 0xffff) + { + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n")); + return FALSE; + } + + //invalidate the original mapping entry if new entry is not found + tmpaddr = addr; + + if(addr % 2 != 0) + addr = addr -1; + InBuf[0] = addr; + InBuf[1] = 2; + + eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2); + + // write the logical address + if(tmpaddr%2 != 0) + { + // Invalidate the high byte + for (i=8; i<15; i++) + { + if( ( (InBuf[2] >> i) & 0x01) == 0) + { + InBuf[2] |= (0x1 <<i); + break; + } + } + } + else + { + // invalidate the low byte + for (i=0; i<8; i++) + { + if( ( (InBuf[2] >> i) & 0x01) == 0) + { + InBuf[2] |= (0x1 <<i); + break; + } + } + } + eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0); + } + } + while(!bWriteSuccess); + + return TRUE; +} + +/* + ======================================================================== + + Routine Description: + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +VOID eFuseWritePhysical( + IN PRTMP_ADAPTER pAd, + PUSHORT lpInBuffer, + ULONG nInBufferSize, + PUCHAR lpOutBuffer, + ULONG nOutBufferSize +) +{ + USHORT* pInBuf = (USHORT*)lpInBuffer; + int i; + //USHORT* pOutBuf = (USHORT*)ioBuffer; + + USHORT Offset = pInBuf[0]; //addr + USHORT Length = pInBuf[1]; //length + USHORT* pValueX = &pInBuf[2]; //value ... + // Little-endian S | S Big-endian + // addr 3 2 1 0 | 0 1 2 3 + // Ori-V D C B A | A B C D + //After swapping + // D C B A | D C B A + //Both the little and big-endian use the same sequence to write data. + //Therefore, we only need swap data when read the data. + for(i=0; i<Length; i+=2) + { + eFusePhysicalWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]); + } +} + + +/* + ======================================================================== + + Routine Description: + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +NTSTATUS eFuseWrite( + IN PRTMP_ADAPTER pAd, + IN USHORT Offset, + IN PUCHAR pData, + IN USHORT length) +{ + int i; + + USHORT* pValueX = (PUSHORT) pData; //value ... + //The input value=3070 will be stored as following + // Little-endian S | S Big-endian + // addr 1 0 | 0 1 + // Ori-V 30 70 | 30 70 + //After swapping + // 30 70 | 70 30 + //Casting + // 3070 | 7030 (x) + //The swapping should be removed for big-endian + for(i=0; i<length; i+=2) + { + eFuseWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]); + } + + return TRUE; +} + +/* + ======================================================================== + + Routine Description: + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +INT set_eFuseGetFreeBlockCount_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + USHORT i; + USHORT LogicalAddress; + USHORT efusefreenum=0; + if(!pAd->bUseEfuse) + return FALSE; + for (i = EFUSE_USAGE_MAP_START; i <= EFUSE_USAGE_MAP_END; i+=2) + { + eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress); + if( (LogicalAddress & 0xff) == 0) + { + efusefreenum= (UCHAR) (EFUSE_USAGE_MAP_END-i+1); + break; + } + else if(( (LogicalAddress >> 8) & 0xff) == 0) + { + efusefreenum = (UCHAR) (EFUSE_USAGE_MAP_END-i); + break; + } + + if(i == EFUSE_USAGE_MAP_END) + efusefreenum = 0; + } + printk("efuseFreeNumber is %d\n",efusefreenum); + return TRUE; +} +INT set_eFusedump_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ +USHORT InBuf[3]; + INT i=0; + if(!pAd->bUseEfuse) + return FALSE; + for(i =0; i<EFUSE_USAGE_MAP_END/2; i++) + { + InBuf[0] = 2*i; + InBuf[1] = 2; + InBuf[2] = 0x0; + + eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2); + if(i%4==0) + printk("\nBlock %x:",i/8); + printk("%04x ",InBuf[2]); + } + return TRUE; +} +INT set_eFuseLoadFromBin_Proc( + IN PRTMP_ADAPTER pAd, + IN PUCHAR arg) +{ + CHAR *src; + struct file *srcf; + INT retval, orgfsuid, orgfsgid; + mm_segment_t orgfs; + UCHAR *buffer; + UCHAR BinFileSize=0; + INT i = 0,j=0,k=1; + USHORT *PDATA; + USHORT DATA; + BinFileSize=strlen("RT30xxEEPROM.bin"); + src = kmalloc(128, MEM_ALLOC_FLAG); + NdisZeroMemory(src, 128); + + if(strlen(arg)>0) + { + + NdisMoveMemory(src, arg, strlen(arg)); + } + + else + { + + NdisMoveMemory(src, "RT30xxEEPROM.bin", BinFileSize); + } + + DBGPRINT(RT_DEBUG_TRACE, ("FileName=%s\n",src)); + buffer = kmalloc(MAX_EEPROM_BIN_FILE_SIZE, MEM_ALLOC_FLAG); + + if(buffer == NULL) + { + kfree(src); + return FALSE; +} + PDATA=kmalloc(sizeof(USHORT)*8,MEM_ALLOC_FLAG); + + if(PDATA==NULL) + { + kfree(src); + + kfree(buffer); + return FALSE; + } + /* Don't change to uid 0, let the file be opened as the "normal" user */ +#if 0 + orgfsuid = current->fsuid; + orgfsgid = current->fsgid; + current->fsuid=current->fsgid = 0; +#endif + orgfs = get_fs(); + set_fs(KERNEL_DS); + + if (src && *src) + { + srcf = filp_open(src, O_RDONLY, 0); + if (IS_ERR(srcf)) + { + DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src)); + return FALSE; + } + else + { + // The object must have a read method + if (srcf->f_op && srcf->f_op->read) + { + memset(buffer, 0x00, MAX_EEPROM_BIN_FILE_SIZE); + while(srcf->f_op->read(srcf, &buffer[i], 1, &srcf->f_pos)==1) + { + DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[i])); + if((i+1)%8==0) + DBGPRINT(RT_DEBUG_TRACE, ("\n")); + i++; + if(i>=MAX_EEPROM_BIN_FILE_SIZE) + { + DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld reading %s, The file is too large[1024]\n", -PTR_ERR(srcf),src)); + kfree(PDATA); + kfree(buffer); + kfree(src); + return FALSE; + } + } + } + else + { + DBGPRINT(RT_DEBUG_ERROR, ("--> Error!! System doest not support read function\n")); + kfree(PDATA); + kfree(buffer); + kfree(src); + return FALSE; + } + } + + + } + else + { + DBGPRINT(RT_DEBUG_ERROR, ("--> Error src or srcf is null\n")); + kfree(PDATA); + kfree(buffer); + return FALSE; + + } + + + retval=filp_close(srcf,NULL); + + if (retval) + { + DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src)); + } + set_fs(orgfs); +#if 0 + current->fsuid = orgfsuid; + current->fsgid = orgfsgid; +#endif + for(j=0;j<i;j++) + { + DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[j])); + if((j+1)%2==0) + PDATA[j/2%8]=((buffer[j]<<8)&0xff00)|(buffer[j-1]&0xff); + if(j%16==0) + { + k=buffer[j]; + } + else + { + k&=buffer[j]; + if((j+1)%16==0) + { + + DBGPRINT(RT_DEBUG_TRACE, (" result=%02X,blk=%02x\n",k,j/16)); + + if(k!=0xff) + eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA); + else + { + if(eFuseReadRegisters(pAd,j, 2,(PUSHORT)&DATA)!=0x3f) + eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA); + } + /* + for(l=0;l<8;l++) + printk("%04x ",PDATA[l]); + printk("\n"); + */ + NdisZeroMemory(PDATA,16); + + + } + } + + + } + + + kfree(PDATA); + kfree(buffer); + kfree(src); + return TRUE; +} +NTSTATUS eFuseWriteRegistersFromBin( + IN PRTMP_ADAPTER pAd, + IN USHORT Offset, + IN USHORT Length, + IN USHORT* pData) +{ + USHORT i; + USHORT eFuseData; + USHORT LogicalAddress, BlkNum = 0xffff; + UCHAR EFSROM_AOUT,Loop=0; + EFUSE_CTRL_STRUC eFuseCtrlStruc; + USHORT efuseDataOffset; + UINT32 data,tempbuffer; + USHORT addr,tmpaddr, InBuf[3], tmpOffset; + UINT32 buffer[4]; + BOOLEAN bWriteSuccess = TRUE; + BOOLEAN bNotWrite=TRUE; + BOOLEAN bAllocateNewBlk=TRUE; + + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin Offset=%x, pData=%04x:%04x:%04x:%04x\n", Offset, *pData,*(pData+1),*(pData+2),*(pData+3))); + + do + { + //Step 0. find the entry in the mapping table + //The address of EEPROM is 2-bytes alignment. + //The last bit is used for alignment, so it must be 0. + Loop++; + tmpOffset = Offset & 0xfffe; + EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData); + + if( EFSROM_AOUT == 0x3f) + { //find available logical address pointer + //the logical address does not exist, find an empty one + //from the first address of block 45=16*45=0x2d0 to the last address of block 47 + //==>48*16-3(reserved)=2FC + bAllocateNewBlk=TRUE; + for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2) + { + //Retrive the logical block nubmer form each logical address pointer + //It will access two logical address pointer each time. + eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress); + if( (LogicalAddress & 0xff) == 0) + {//Not used logical address pointer + BlkNum = i-EFUSE_USAGE_MAP_START; + break; + } + else if(( (LogicalAddress >> 8) & 0xff) == 0) + {//Not used logical address pointer + if (i != EFUSE_USAGE_MAP_END) + { + BlkNum = i-EFUSE_USAGE_MAP_START+1; + } + break; + } + } + } + else + { + bAllocateNewBlk=FALSE; + BlkNum = EFSROM_AOUT; + } + + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum)); + + if(BlkNum == 0xffff) + { + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n")); + return FALSE; + } + //Step 1.1.0 + //If the block is not existing in mapping table, create one + //and write down the 16-bytes data to the new block + if(bAllocateNewBlk) + { + DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk\n")); + efuseDataOffset = EFUSE_DATA3; + for(i=0; i< 4; i++) + { + DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk, Data%d=%04x%04x\n",3-i,pData[2*i+1],pData[2*i])); + tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i]; + + + RTMP_IO_WRITE32(pAd, efuseDataOffset,tempbuffer); + efuseDataOffset -= 4; + + } + ///////////////////////////////////////////////////////////////// + + //Step1.1.1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. + eFuseCtrlStruc.field.EFSROM_AIN = BlkNum* 0x10 ; + + //Step1.1.2. Write EFSROM_MODE (0x580, bit7:bit6) to 3. + eFuseCtrlStruc.field.EFSROM_MODE = 3; + + //Step1.1.3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure. + eFuseCtrlStruc.field.EFSROM_KICK = 1; + + NdisMoveMemory(&data, &eFuseCtrlStruc, 4); + + RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data); + + //Step1.1.4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It��s done. + i = 0; + while(i < 100) + { + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + + if(eFuseCtrlStruc.field.EFSROM_KICK == 0) + break; + + RTMPusecDelay(2); + i++; + } + + } + else + { //Step1.2. + //If the same logical number is existing, check if the writting data and the data + //saving in this block are the same. + ///////////////////////////////////////////////////////////////// + //read current values of 16-byte block + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + + //Step1.2.0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment. + eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0; + + //Step1.2.1. Write EFSROM_MODE (0x580, bit7:bit6) to 1. + eFuseCtrlStruc.field.EFSROM_MODE = 0; + + //Step1.2.2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure. + eFuseCtrlStruc.field.EFSROM_KICK = 1; + + NdisMoveMemory(&data, &eFuseCtrlStruc, 4); + RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data); + + //Step1.2.3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. + i = 0; + while(i < 100) + { + RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc); + + if(eFuseCtrlStruc.field.EFSROM_KICK == 0) + break; + RTMPusecDelay(2); + i++; + } + + //Step1.2.4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590) + efuseDataOffset = EFUSE_DATA3; + for(i=0; i< 4; i++) + { + RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &buffer[i]); + efuseDataOffset -= 4; + } + //Step1.2.5. Check if the data of efuse and the writing data are the same. + for(i =0; i<4; i++) + { + tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i]; + DBGPRINT(RT_DEBUG_TRACE, ("buffer[%d]=%x,pData[%d]=%x,pData[%d]=%x,tempbuffer=%x\n",i,buffer[i],2*i,pData[2*i],2*i+1,pData[2*i+1],tempbuffer)); + + if(((buffer[i]&0xffff0000)==(pData[2*i+1]<<16))&&((buffer[i]&0xffff)==pData[2*i])) + bNotWrite&=TRUE; + else + { + bNotWrite&=FALSE; + break; + } + } + if(!bNotWrite) + { + printk("The data is not the same\n"); + + for(i =0; i<8; i++) + { + addr = BlkNum * 0x10 ; + + InBuf[0] = addr+2*i; + InBuf[1] = 2; + InBuf[2] = pData[i]; + + eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2); + } + + } + else + return TRUE; + } + + + + //Step 2. Write mapping table + addr = EFUSE_USAGE_MAP_START+BlkNum; + + tmpaddr = addr; + + if(addr % 2 != 0) + addr = addr -1; + InBuf[0] = addr; + InBuf[1] = 2; + + //convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry + tmpOffset = Offset; + tmpOffset >>= 4; + tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^ (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01))) << 6) & 0x40; + tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80; + + // write the logical address + if(tmpaddr%2 != 0) + InBuf[2] = tmpOffset<<8; + else + InBuf[2] = tmpOffset; + + eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0); + + //Step 3. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted + bWriteSuccess = TRUE; + for(i =0; i<8; i++) + { + addr = BlkNum * 0x10 ; + + InBuf[0] = addr+2*i; + InBuf[1] = 2; + InBuf[2] = 0x0; + + eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2); + DBGPRINT(RT_DEBUG_TRACE, ("addr=%x, buffer[i]=%x,InBuf[2]=%x\n",InBuf[0],pData[i],InBuf[2])); + if(pData[i] != InBuf[2]) + { + bWriteSuccess = FALSE; + break; + } + } + + //Step 4. invlidate mapping entry and find a free mapping entry if not succeed + + if (!bWriteSuccess&&Loop<2) + { + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess BlkNum = %d\n", BlkNum)); + + // the offset of current mapping entry + addr = EFUSE_USAGE_MAP_START+BlkNum; + + //find a new mapping entry + BlkNum = 0xffff; + for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2) + { + eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress); + if( (LogicalAddress & 0xff) == 0) + { + BlkNum = i-EFUSE_USAGE_MAP_START; + break; + } + else if(( (LogicalAddress >> 8) & 0xff) == 0) + { + if (i != EFUSE_USAGE_MAP_END) + { + BlkNum = i+1-EFUSE_USAGE_MAP_START; + } + break; + } + } + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess new BlkNum = %d\n", BlkNum)); + if(BlkNum == 0xffff) + { + DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin: out of free E-fuse space!!!\n")); + return FALSE; + } + + //invalidate the original mapping entry if new entry is not found + tmpaddr = addr; + + if(addr % 2 != 0) + addr = addr -1; + InBuf[0] = addr; + InBuf[1] = 2; + + eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2); + + // write the logical address + if(tmpaddr%2 != 0) + { + // Invalidate the high byte + for (i=8; i<15; i++) + { + if( ( (InBuf[2] >> i) & 0x01) == 0) + { + InBuf[2] |= (0x1 <<i); + break; + } + } + } + else + { + // invalidate the low byte + for (i=0; i<8; i++) + { + if( ( (InBuf[2] >> i) & 0x01) == 0) + { + InBuf[2] |= (0x1 <<i); + break; + } + } + } + eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0); + } + + } + while(!bWriteSuccess&&Loop<2); + + return TRUE; } +#endif // RT30xx // +//2008/09/11:KH add to support efuse--> diff --git a/drivers/staging/rt2860/common/md5.c b/drivers/staging/rt2860/common/md5.c index 774776b4b8c3..ad883ca2ffc8 100644 --- a/drivers/staging/rt2860/common/md5.c +++ b/drivers/staging/rt2860/common/md5.c @@ -131,19 +131,7 @@ void hmac_md5(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac) MD5Final(mac, &context); /* finish up 2nd pass */ } -#ifndef RT_BIG_ENDIAN #define byteReverse(buf, len) /* Nothing */ -#else -void byteReverse(unsigned char *buf, unsigned longs); -void byteReverse(unsigned char *buf, unsigned longs) -{ - do { - *(UINT32 *)buf = SWAP32(*(UINT32 *)buf); - buf += 4; - } while (--longs); -} -#endif - /* ========================== MD5 implementation =========================== */ // four base functions for MD5 diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c index 2edf2999f5c8..bb6fccbdca41 100644 --- a/drivers/staging/rt2860/common/mlme.c +++ b/drivers/staging/rt2860/common/mlme.c @@ -50,11 +50,7 @@ UCHAR Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04}; UCHAR RALINK_OUI[] = {0x00, 0x0c, 0x43}; UCHAR BROADCOM_OUI[] = {0x00, 0x90, 0x4c}; UCHAR WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04}; -#ifdef CONFIG_STA_SUPPORT -#ifdef DOT11_N_SUPPORT UCHAR PRE_N_HT_OUI[] = {0x00, 0x90, 0x4c}; -#endif // DOT11_N_SUPPORT // -#endif // CONFIG_STA_SUPPORT // UCHAR RateSwitchTable[] = { // Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) @@ -130,7 +126,6 @@ UCHAR RateSwitchTable11G[] = { 0x07, 0x10, 7, 10, 13, }; -#ifdef DOT11_N_SUPPORT UCHAR RateSwitchTable11N1S[] = { // Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF) 0x09, 0x00, 0, 0, 0, // Initial used item after association @@ -287,7 +282,6 @@ UCHAR RateSwitchTable11BGN3SForABand[] = { // 3*3 0x0a, 0x20, 23, 8, 25, 0x0b, 0x22, 23, 8, 25, }; -#endif // DOT11_N_SUPPORT // PUCHAR ReasonString[] = { /* 0 */ "Reserved", @@ -334,14 +328,9 @@ USHORT RateIdTo500Kbps[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 144, UCHAR SsidIe = IE_SSID; UCHAR SupRateIe = IE_SUPP_RATES; UCHAR ExtRateIe = IE_EXT_SUPP_RATES; -#ifdef DOT11_N_SUPPORT UCHAR HtCapIe = IE_HT_CAP; UCHAR AddHtInfoIe = IE_ADD_HT; UCHAR NewExtChanIe = IE_SECONDARY_CH_OFFSET; -#ifdef DOT11N_DRAFT3 -UCHAR ExtHtCapIe = IE_EXT_CAPABILITY; -#endif // DOT11N_DRAFT3 // -#endif // DOT11_N_SUPPORT // UCHAR ErpIe = IE_ERP; UCHAR DsIe = IE_DS_PARM; UCHAR TimIe = IE_TIM; @@ -349,6 +338,9 @@ UCHAR WpaIe = IE_WPA; UCHAR Wpa2Ie = IE_WPA2; UCHAR IbssIe = IE_IBSS_PARM; UCHAR Ccx2Ie = IE_CCX_V2; +#ifdef RT2870 +UCHAR WapiIe = IE_WAPI; +#endif extern UCHAR WPA_OUI[]; @@ -457,7 +449,13 @@ FREQUENCY_ITEM FreqItems3020[] = {13, 247, 2, 2}, {14, 248, 2, 4}, }; +#ifndef RT30xx #define NUM_OF_3020_CHNL (sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM)) +#endif +#ifdef RT30xx +//2008/07/10:KH Modified to share this variable +UCHAR NUM_OF_3020_CHNL=(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM)); +#endif /* ========================================================================== @@ -488,8 +486,6 @@ NDIS_STATUS MlmeInit( pAd->Mlme.bRunning = FALSE; NdisAllocateSpinLock(&pAd->Mlme.TaskLock); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { BssTableInit(&pAd->ScanTab); @@ -501,18 +497,10 @@ NDIS_STATUS MlmeInit( WpaPskStateMachineInit(pAd, &pAd->Mlme.WpaPskMachine, pAd->Mlme.WpaPskFunc); AironetStateMachineInit(pAd, &pAd->Mlme.AironetMachine, pAd->Mlme.AironetFunc); -#ifdef QOS_DLS_SUPPORT - DlsStateMachineInit(pAd, &pAd->Mlme.DlsMachine, pAd->Mlme.DlsFunc); -#endif // QOS_DLS_SUPPORT // - - // Since we are using switch/case to implement it, the init is different from the above // state machine init MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL); } -#endif // CONFIG_STA_SUPPORT // - - ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine, pAd->Mlme.ActFunc); @@ -525,9 +513,7 @@ NDIS_STATUS MlmeInit( // software-based RX Antenna diversity RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) +#ifdef RT2860 { if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { @@ -536,8 +522,7 @@ NDIS_STATUS MlmeInit( RTMPInitTimer(pAd, &pAd->Mlme.RadioOnOffTimer, GET_TIMER_FUNCTION(RadioOnExec), pAd, FALSE); } } -#endif // CONFIG_STA_SUPPORT // - +#endif } while (FALSE); DBGPRINT(RT_DEBUG_TRACE, ("<-- MLME Initialize\n")); @@ -563,9 +548,6 @@ VOID MlmeHandler( IN PRTMP_ADAPTER pAd) { MLME_QUEUE_ELEM *Elem = NULL; -#ifdef APCLI_SUPPORT - SHORT apcliIfIndex; -#endif // Only accept MLME and Frame from peer side, no other (control/data) frame should // get into this state machine @@ -592,23 +574,24 @@ VOID MlmeHandler( break; } -#ifdef RALINK_ATE - if(ATE_ON(pAd)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n")); - break; - } -#endif // RALINK_ATE // - //From message type, determine which state machine I should drive if (MlmeDequeue(&pAd->Mlme.Queue, &Elem)) { +#ifdef RT2870 + if (Elem->MsgType == MT2_RESET_CONF) + { + DBGPRINT_RAW(RT_DEBUG_TRACE, ("!!! reset MLME state machine !!!\n")); + MlmeRestartStateMachine(pAd); + Elem->Occupied = FALSE; + Elem->MsgLen = 0; + continue; + } +#endif // RT2870 // // if dequeue success switch (Elem->Machine) { // STA state machines -#ifdef CONFIG_STA_SUPPORT case ASSOC_STATE_MACHINE: StateMachinePerformAction(pAd, &pAd->Mlme.AssocMachine, Elem); break; @@ -627,22 +610,9 @@ VOID MlmeHandler( case WPA_PSK_STATE_MACHINE: StateMachinePerformAction(pAd, &pAd->Mlme.WpaPskMachine, Elem); break; -#ifdef LEAP_SUPPORT - case LEAP_STATE_MACHINE: - LeapMachinePerformAction(pAd, &pAd->Mlme.LeapMachine, Elem); - break; -#endif case AIRONET_STATE_MACHINE: StateMachinePerformAction(pAd, &pAd->Mlme.AironetMachine, Elem); break; - -#ifdef QOS_DLS_SUPPORT - case DLS_STATE_MACHINE: - StateMachinePerformAction(pAd, &pAd->Mlme.DlsMachine, Elem); - break; -#endif // QOS_DLS_SUPPORT // -#endif // CONFIG_STA_SUPPORT // - case ACTION_STATE_MACHINE: StateMachinePerformAction(pAd, &pAd->Mlme.ActMachine, Elem); break; @@ -687,6 +657,9 @@ VOID MlmeHalt( IN PRTMP_ADAPTER pAd) { BOOLEAN Cancelled; +#ifdef RT3070 + UINT32 TxPinCfg = 0x00050F0F; +#endif // RT3070 // DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n")); @@ -696,12 +669,7 @@ VOID MlmeHalt( AsicDisableSync(pAd); } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef QOS_DLS_SUPPORT - UCHAR i; -#endif // QOS_DLS_SUPPORT // // Cancel pending timers RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled); @@ -709,20 +677,14 @@ VOID MlmeHalt( RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); +#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); } - -#ifdef QOS_DLS_SUPPORT - for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++) - { - RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled); - } -#endif // QOS_DLS_SUPPORT // +#endif } -#endif // CONFIG_STA_SUPPORT // RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled); RTMPCancelTimer(&pAd->Mlme.RxAntEvalTimer, &Cancelled); @@ -734,6 +696,27 @@ VOID MlmeHalt( // Set LED RTMPSetLED(pAd, LED_HALT); RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, firmware is not done it. +#ifdef RT2870 + { + LED_CFG_STRUC LedCfg; + RTMP_IO_READ32(pAd, LED_CFG, &LedCfg.word); + LedCfg.field.LedPolar = 0; + LedCfg.field.RLedMode = 0; + LedCfg.field.GLedMode = 0; + LedCfg.field.YLedMode = 0; + RTMP_IO_WRITE32(pAd, LED_CFG, LedCfg.word); + } +#endif // RT2870 // +#ifdef RT3070 + // + // Turn off LNA_PE + // + if (IS_RT3070(pAd) || IS_RT3071(pAd)) + { + TxPinCfg &= 0xFFFFF0F0; + RTUSBWriteMACRegister(pAd, TX_PIN_CFG, TxPinCfg); + } +#endif // RT3070 // } RTMPusecDelay(5000); // 5 msec to gurantee Ant Diversity timer canceled @@ -804,6 +787,7 @@ VOID MlmePeriodicExec( ULONG TxTotalCnt; PRTMP_ADAPTER pAd = (RTMP_ADAPTER *)FunctionContext; +#ifdef RT2860 //Baron 2008/07/10 //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus)); //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0. @@ -817,8 +801,6 @@ VOID MlmePeriodicExec( pAd->StaCfg.WpaSupplicantUP = 1; } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second. // Move code to here, because following code will return when radio is off @@ -858,7 +840,7 @@ VOID MlmePeriodicExec( } } } -#endif // CONFIG_STA_SUPPORT // +#endif /* RT2860 */ // Do nothing if the driver is starting halt state. // This might happen when timer already been fired before cancel timer with mlmehalt @@ -868,7 +850,7 @@ VOID MlmePeriodicExec( fRTMP_ADAPTER_RESET_IN_PROGRESS)))) return; - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) +#ifdef RT2860 { if ((pAd->RalinkCounters.LastReceivedByteCount == pAd->RalinkCounters.ReceivedByteCount) && (pAd->StaCfg.bRadio == TRUE)) { @@ -906,23 +888,9 @@ VOID MlmePeriodicExec( AsicResetFromDMABusy(pAd); } } - +#endif /* RT2860 */ RT28XX_MLME_PRE_SANITY_CHECK(pAd); -#ifdef RALINK_ATE - /* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */ - if (ATE_ON(pAd)) - { - if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1)) - { - pAd->Mlme.PeriodicRound ++; - return; - } - } -#endif // RALINK_ATE // - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // Do nothing if monitor mode is on if (MONITOR_ON(pAd)) @@ -947,26 +915,26 @@ VOID MlmePeriodicExec( } } } -#endif // CONFIG_STA_SUPPORT // pAd->bUpdateBcnCntDone = FALSE; // RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3); pAd->Mlme.PeriodicRound ++; +#ifdef RT3070 + // execute every 100ms, update the Tx FIFO Cnt for update Tx Rate. + NICUpdateFifoStaCounters(pAd); +#endif // RT3070 // // execute every 500ms if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/) { -#ifdef CONFIG_STA_SUPPORT // perform dynamic tx rate switching based on past TX history - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) ) && (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))) MlmeDynamicTxRateSwitching(pAd); } -#endif // CONFIG_STA_SUPPORT // } // Normal 1 second Mlme PeriodicExec. @@ -974,30 +942,6 @@ VOID MlmePeriodicExec( { pAd->Mlme.OneSecPeriodicRound ++; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - /* request from Baron : move this routine from later to here */ - /* for showing Rx error count in ATE RXFRAME */ - NICUpdateRawCounters(pAd); - if (pAd->ate.bRxFer == 1) - { - pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec; - ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt); - pAd->ate.RxCntPerSec = 0; - - if (pAd->ate.RxAntennaSel == 0) - ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n", - pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2); - else - ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0); - } - MlmeResetRalinkCounters(pAd); - return; - } -#endif // RALINK_ATE // - - if (rx_Total) { @@ -1029,12 +973,12 @@ VOID MlmePeriodicExec( // the dynamic tuning mechanism below are based on most up-to-date information NICUpdateRawCounters(pAd); +#ifdef RT2870 + RT2870_WatchDog(pAd); +#endif // RT2870 // -#ifdef DOT11_N_SUPPORT // Need statistics after read counter. So put after NICUpdateRawCounters ORIBATimerTimeout(pAd); -#endif // DOT11_N_SUPPORT // - // The time period for checking antenna is according to traffic if (pAd->Mlme.bEnableAutoAntennaCheck) @@ -1043,6 +987,7 @@ VOID MlmePeriodicExec( pAd->RalinkCounters.OneSecTxRetryOkCount + pAd->RalinkCounters.OneSecTxFailCount; + // dynamic adjust antenna evaluation period according to the traffic if (TxTotalCnt > 50) { if (pAd->Mlme.OneSecPeriodicRound % 10 == 0) @@ -1059,17 +1004,14 @@ VOID MlmePeriodicExec( } } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - STAMlmePeriodicExec(pAd); -#endif // CONFIG_STA_SUPPORT // + STAMlmePeriodicExec(pAd); MlmeResetRalinkCounters(pAd); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { +#ifdef RT2860 if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE)) +#endif { // When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock // and sending CTS-to-self over and over. @@ -1091,41 +1033,32 @@ VOID MlmePeriodicExec( } } } -#endif // CONFIG_STA_SUPPORT // RT28XX_MLME_HANDLER(pAd); } - pAd->bUpdateBcnCntDone = FALSE; } -#ifdef CONFIG_STA_SUPPORT VOID STAMlmePeriodicExec( PRTMP_ADAPTER pAd) { +#ifdef RT2860 ULONG TxTotalCnt; +#endif +#ifdef RT2870 + ULONG TxTotalCnt; + int i; +#endif -// -// We return here in ATE mode, because the statistics -// that ATE needs are not collected via this routine. -// -#ifdef RALINK_ATE - // It is supposed that we will never reach here in ATE mode. - ASSERT(!(ATE_ON(pAd))); - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - -#ifdef WPA_SUPPLICANT_SUPPORT if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE) -#endif // WPA_SUPPLICANT_SUPPORT // { // WPA MIC error should block association attempt for 60 seconds if (pAd->StaCfg.bBlockAssoc && (pAd->StaCfg.LastMicErrorTime + (60 * OS_HZ) < pAd->Mlme.Now32)) pAd->StaCfg.bBlockAssoc = FALSE; } +#ifdef RT2860 //Baron 2008/07/10 //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus)); //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0. @@ -1138,6 +1071,7 @@ VOID STAMlmePeriodicExec( { pAd->StaCfg.WpaSupplicantUP = 1; } +#endif if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent)) { @@ -1148,6 +1082,7 @@ VOID STAMlmePeriodicExec( pAd->PreMediaState = pAd->IndicateMediaState; } +#ifdef RT2860 if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd)) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) && (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE) && @@ -1157,6 +1092,7 @@ VOID STAMlmePeriodicExec( { RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0); } +#endif @@ -1179,11 +1115,6 @@ VOID STAMlmePeriodicExec( if (INFRA_ON(pAd)) { -#ifdef QOS_DLS_SUPPORT - // Check DLS time out, then tear down those session - RTMPCheckDLSTimeOut(pAd); -#endif // QOS_DLS_SUPPORT // - // Is PSM bit consistent with user power management policy? // This is the only place that will set PSM bit ON. if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) @@ -1228,26 +1159,11 @@ VOID STAMlmePeriodicExec( // Lost AP, send disconnect & link down event LinkDown(pAd, FALSE); -#ifdef WPA_SUPPLICANT_SUPPORT -#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT - if (pAd->StaCfg.WpaSupplicantUP) - { - union iwreq_data wrqu; - //send disassociate event to wpa_supplicant - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.flags = RT_DISASSOC_EVENT_FLAG; - wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, NULL); - } -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // -#endif // WPA_SUPPLICANT_SUPPORT // - -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT { union iwreq_data wrqu; memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN); wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL); } -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // MlmeAutoReconnectLastSSID(pAd); } @@ -1273,6 +1189,7 @@ VOID STAMlmePeriodicExec( } else if (ADHOC_ON(pAd)) { +#ifdef RT2860 // 2003-04-17 john. this is a patch that driver forces a BEACON out if ASIC fails // the "TX BEACON competition" for the entire past 1 sec. // So that even when ASIC's BEACONgen engine been blocked @@ -1297,7 +1214,6 @@ VOID STAMlmePeriodicExec( pAd->StaCfg.AdhocBOnlyJoined = FALSE; } -#ifdef DOT11_N_SUPPORT if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) { if ((pAd->StaCfg.AdhocBGJoined) && @@ -1314,7 +1230,7 @@ VOID STAMlmePeriodicExec( pAd->StaCfg.Adhoc20NJoined = FALSE; } } -#endif // DOT11_N_SUPPORT // +#endif /* RT2860 */ //radar detect if ((pAd->CommonCfg.Channel > 14) @@ -1339,6 +1255,19 @@ VOID STAMlmePeriodicExec( MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq); pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START; } + +#ifdef RT2870 + for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) + { + MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[i]; + + if (pEntry->ValidAsCLI == FALSE) + continue; + + if (pEntry->LastBeaconRxTime + ADHOC_BEACON_LOST_TIME < pAd->Mlme.Now32) + MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr); + } +#endif } else // no INFRA nor ADHOC connection { @@ -1378,14 +1307,6 @@ VOID STAMlmePeriodicExec( } else { -#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier - if (pAd->CommonCfg.CarrierDetect.Enable == TRUE) - { - if ((pAd->Mlme.OneSecPeriodicRound % 5) == 1) - MlmeAutoReconnectLastSSID(pAd); - } - else -#endif // CARRIER_DETECTION_SUPPORT // MlmeAutoReconnectLastSSID(pAd); } } @@ -1394,7 +1315,6 @@ VOID STAMlmePeriodicExec( SKIP_AUTO_SCAN_CONN: -#ifdef DOT11_N_SUPPORT if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap !=0) && (pAd->MacTab.fAnyBASession == FALSE)) { pAd->MacTab.fAnyBASession = TRUE; @@ -1405,15 +1325,6 @@ SKIP_AUTO_SCAN_CONN: pAd->MacTab.fAnyBASession = FALSE; AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE); } -#endif // DOT11_N_SUPPORT // - - -#ifdef DOT11_N_SUPPORT -#ifdef DOT11N_DRAFT3 - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040)) - TriEventCounterMaintenance(pAd); -#endif // DOT11N_DRAFT3 // -#endif // DOT11_N_SUPPORT // return; } @@ -1473,7 +1384,6 @@ VOID MlmeAutoReconnectLastSSID( RT28XX_MLME_HANDLER(pAd); } } -#endif // CONFIG_STA_SUPPORT // /* ========================================================================== @@ -1522,15 +1432,19 @@ VOID MlmeSelectTxRateTable( break; } -#ifdef CONFIG_STA_SUPPORT if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd)) { -#ifdef DOT11_N_SUPPORT if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && +#ifdef RT2860 !pAd->StaCfg.AdhocBOnlyJoined && !pAd->StaCfg.AdhocBGJoined && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) +#endif +#ifdef RT2870 + (pEntry->HTCapability.MCSSet[0] == 0xff) && + ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1))) +#endif {// 11N 1S Adhoc *ppTable = RateSwitchTable11N1S; *pTableSize = RateSwitchTable11N1S[0]; @@ -1538,10 +1452,16 @@ VOID MlmeSelectTxRateTable( } else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && +#ifdef RT2860 !pAd->StaCfg.AdhocBOnlyJoined && !pAd->StaCfg.AdhocBGJoined && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && +#endif +#ifdef RT2870 + (pEntry->HTCapability.MCSSet[0] == 0xff) && + (pEntry->HTCapability.MCSSet[1] == 0xff) && +#endif (pAd->Antenna.field.TxPath == 2)) {// 11N 2S Adhoc if (pAd->LatchRfRegs.Channel <= 14) @@ -1559,7 +1479,7 @@ VOID MlmeSelectTxRateTable( } else -#endif // DOT11_N_SUPPORT // +#ifdef RT2860 if (pAd->CommonCfg.PhyMode == PHY_11B) { *ppTable = RateSwitchTable11B; @@ -1568,6 +1488,12 @@ VOID MlmeSelectTxRateTable( } else if((pAd->LatchRfRegs.Channel <= 14) && (pAd->StaCfg.AdhocBOnlyJoined == TRUE)) +#endif +#ifdef RT2870 + if ((pEntry->RateLen == 4) + && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) + ) +#endif { // USe B Table when Only b-only Station in my IBSS . *ppTable = RateSwitchTable11B; @@ -1591,9 +1517,7 @@ VOID MlmeSelectTxRateTable( } break; } -#endif // CONFIG_STA_SUPPORT // -#ifdef DOT11_N_SUPPORT if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1))) {// 11BGN 1S AP @@ -1650,12 +1574,13 @@ VOID MlmeSelectTxRateTable( break; } -#endif // DOT11_N_SUPPORT // + //else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) if ((pEntry->RateLen == 4) -#ifdef DOT11_N_SUPPORT +#ifndef RT30xx +//Iverson mark for Adhoc b mode,sta will use rate 54 Mbps when connect with sta b/g/n mode && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // +#endif ) {// B only AP *ppTable = RateSwitchTable11B; @@ -1667,9 +1592,7 @@ VOID MlmeSelectTxRateTable( //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) if ((pEntry->RateLen > 8) -#ifdef DOT11_N_SUPPORT && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // ) {// B/G mixed AP *ppTable = RateSwitchTable11BG; @@ -1681,9 +1604,7 @@ VOID MlmeSelectTxRateTable( //else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) if ((pEntry->RateLen == 8) -#ifdef DOT11_N_SUPPORT && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0) -#endif // DOT11_N_SUPPORT // ) {// G only AP *ppTable = RateSwitchTable11G; @@ -1692,16 +1613,10 @@ VOID MlmeSelectTxRateTable( break; } -#ifdef DOT11_N_SUPPORT -#endif // DOT11_N_SUPPORT // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef DOT11_N_SUPPORT //else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0)) if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)) -#endif // DOT11_N_SUPPORT // { // Legacy mode if (pAd->CommonCfg.MaxTxRate <= RATE_11) { @@ -1724,7 +1639,7 @@ VOID MlmeSelectTxRateTable( } break; } -#ifdef DOT11_N_SUPPORT + if (pAd->LatchRfRegs.Channel <= 14) { if (pAd->CommonCfg.TxStream == 1) @@ -1759,15 +1674,13 @@ VOID MlmeSelectTxRateTable( DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n")); } } -#endif // DOT11_N_SUPPORT // + DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n", pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1])); } -#endif // CONFIG_STA_SUPPORT // } while(FALSE); } -#ifdef CONFIG_STA_SUPPORT /* ========================================================================== Description: @@ -1921,14 +1834,6 @@ VOID MlmeCalculateChannelQuality( CHAR MaxRssi; ULONG BeaconLostTime = BEACON_LOST_TIME; -#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier - // longer beacon lost time when carrier detection enabled - if (pAd->CommonCfg.CarrierDetect.Enable == TRUE) - { - BeaconLostTime = BEACON_LOST_TIME + BEACON_LOST_TIME/2; - } -#endif // CARRIER_DETECTION_SUPPORT // - MaxRssi = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2); // @@ -1993,13 +1898,11 @@ VOID MlmeSetTxRate( { UCHAR MaxMode = MODE_OFDM; -#ifdef DOT11_N_SUPPORT MaxMode = MODE_HTGREENFIELD; if (pTxRate->STBC && (pAd->StaCfg.MaxHTPhyMode.field.STBC) && (pAd->Antenna.field.TxPath == 2)) pAd->StaCfg.HTPhyMode.field.STBC = STBC_USE; else -#endif // DOT11_N_SUPPORT // pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE; if (pTxRate->CurrMCS < MCS_AUTO) @@ -2029,14 +1932,11 @@ VOID MlmeSetTxRate( if (pTxRate->Mode <= MaxMode) pAd->StaCfg.HTPhyMode.field.MODE = pTxRate->Mode; -#ifdef DOT11_N_SUPPORT if (pTxRate->ShortGI && (pAd->StaCfg.MaxHTPhyMode.field.ShortGI)) pAd->StaCfg.HTPhyMode.field.ShortGI = GI_400; else -#endif // DOT11_N_SUPPORT // pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800; -#ifdef DOT11_N_SUPPORT // Reexam each bandwidth's SGI support. if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400) { @@ -2080,17 +1980,15 @@ VOID MlmeSetTxRate( { AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent); } -#endif // DOT11_N_SUPPORT // pEntry->HTPhyMode.field.STBC = pAd->StaCfg.HTPhyMode.field.STBC; pEntry->HTPhyMode.field.ShortGI = pAd->StaCfg.HTPhyMode.field.ShortGI; pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS; pEntry->HTPhyMode.field.MODE = pAd->StaCfg.HTPhyMode.field.MODE; -#ifdef DOT11_N_SUPPORT + if ((pAd->StaCfg.MaxHTPhyMode.field.MODE == MODE_HTGREENFIELD) && pAd->WIFItestbed.bGreenField) pEntry->HTPhyMode.field.MODE = MODE_HTGREENFIELD; -#endif // DOT11_N_SUPPORT // } pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word); @@ -2130,18 +2028,6 @@ VOID MlmeDynamicTxRateSwitching( ULONG TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0; MAC_TABLE_ENTRY *pEntry; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - return; - } -#endif // RALINK_ATE // - - /*if (pAd->Antenna.field.RxPath > 1) - Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1; - else - Rssi = pAd->StaCfg.RssiSample.AvgRssi0;*/ - // // walk through MAC table, see if need to change AP's TX rate toward each entry // @@ -2155,7 +2041,15 @@ VOID MlmeDynamicTxRateSwitching( if ((pAd->MacTab.Size == 1) || (pEntry->ValidAsDls)) { +#ifdef RT2860 Rssi = RTMPMaxRssi(pAd, (CHAR)pAd->StaCfg.RssiSample.AvgRssi0, (CHAR)pAd->StaCfg.RssiSample.AvgRssi1, (CHAR)pAd->StaCfg.RssiSample.AvgRssi2); +#endif +#ifdef RT2870 + Rssi = RTMPMaxRssi(pAd, + pAd->StaCfg.RssiSample.AvgRssi0, + pAd->StaCfg.RssiSample.AvgRssi1, + pAd->StaCfg.RssiSample.AvgRssi2); +#endif // Update statistic counter RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word); @@ -2185,7 +2079,21 @@ VOID MlmeDynamicTxRateSwitching( } else { +#ifdef RT2860 Rssi = RTMPMaxRssi(pAd, (CHAR)pEntry->RssiSample.AvgRssi0, (CHAR)pEntry->RssiSample.AvgRssi1, (CHAR)pEntry->RssiSample.AvgRssi2); +#endif +#ifdef RT2870 + if (INFRA_ON(pAd) && (i == 1)) + Rssi = RTMPMaxRssi(pAd, + pAd->StaCfg.RssiSample.AvgRssi0, + pAd->StaCfg.RssiSample.AvgRssi1, + pAd->StaCfg.RssiSample.AvgRssi2); + else + Rssi = RTMPMaxRssi(pAd, + pEntry->RssiSample.AvgRssi0, + pEntry->RssiSample.AvgRssi1, + pEntry->RssiSample.AvgRssi2); +#endif TxTotalCnt = pEntry->OneSecTxNoRetryOkCount + pEntry->OneSecTxRetryOkCount + @@ -2242,14 +2150,12 @@ VOID MlmeDynamicTxRateSwitching( pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5]; -#ifdef DOT11_N_SUPPORT if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX)) { TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1)); TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1)); } else -#endif // DOT11_N_SUPPORT // { TrainUp = pCurrTxRate->TrainUp; TrainDown = pCurrTxRate->TrainDown; @@ -2327,7 +2233,6 @@ VOID MlmeDynamicTxRateSwitching( { MCS14 = idx; } - //else if ((pCurrTxRate->CurrMCS == MCS_15)/* && (pCurrTxRate->ShortGI == GI_800)*/) //we hope to use ShortGI as initial rate else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800)) //we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI { MCS15 = idx; @@ -2373,7 +2278,7 @@ VOID MlmeDynamicTxRateSwitching( RssiOffset = 8; } } -#ifdef DOT11_N_SUPPORT + /*if (MCS15)*/ if ((pTable == RateSwitchTable11BGN3S) || (pTable == RateSwitchTable11N3S) || @@ -2439,7 +2344,6 @@ VOID MlmeDynamicTxRateSwitching( TxRateIdx = MCS0; } else -#endif // DOT11_N_SUPPORT // {// Legacy mode if (MCS7 && (Rssi > -70)) TxRateIdx = MCS7; @@ -2613,7 +2517,12 @@ VOID StaQuickResponeForRateUpExec( UCHAR UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx = 0; ULONG TxTotalCnt; ULONG TxErrorRatio = 0; +#ifdef RT2860 BOOLEAN bTxRateChanged = TRUE; //, bUpgradeQuality = FALSE; +#endif +#ifdef RT2870 + BOOLEAN bTxRateChanged; //, bUpgradeQuality = FALSE; +#endif PRTMP_TX_RATE_SWITCH pCurrTxRate, pNextTxRate = NULL; PUCHAR pTable; UCHAR TableSize = 0; @@ -2638,11 +2547,25 @@ VOID StaQuickResponeForRateUpExec( if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE) continue; +#ifdef RT2860 //Rssi = RTMPMaxRssi(pAd, (CHAR)pAd->StaCfg.AvgRssi0, (CHAR)pAd->StaCfg.AvgRssi1, (CHAR)pAd->StaCfg.AvgRssi2); if (pAd->Antenna.field.TxPath > 1) Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1; else Rssi = pAd->StaCfg.RssiSample.AvgRssi0; +#endif +#ifdef RT2870 + if (INFRA_ON(pAd) && (i == 1)) + Rssi = RTMPMaxRssi(pAd, + pAd->StaCfg.RssiSample.AvgRssi0, + pAd->StaCfg.RssiSample.AvgRssi1, + pAd->StaCfg.RssiSample.AvgRssi2); + else + Rssi = RTMPMaxRssi(pAd, + pEntry->RssiSample.AvgRssi0, + pEntry->RssiSample.AvgRssi1, + pEntry->RssiSample.AvgRssi2); +#endif CurrRateIdx = pAd->CommonCfg.TxRateIndex; @@ -2667,14 +2590,12 @@ VOID StaQuickResponeForRateUpExec( pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5]; -#ifdef DOT11_N_SUPPORT if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX)) { TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1)); TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1)); } else -#endif // DOT11_N_SUPPORT // { TrainUp = pCurrTxRate->TrainUp; TrainDown = pCurrTxRate->TrainDown; @@ -2784,6 +2705,9 @@ VOID StaQuickResponeForRateUpExec( pAd->DrsCounters.TxRateUpPenalty = 0; NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH); NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH); +#ifdef RT2870 + bTxRateChanged = TRUE; +#endif } // if rate-down happen, only clear DownRate's bad history else if (pAd->CommonCfg.TxRateIndex < CurrRateIdx) @@ -2793,6 +2717,9 @@ VOID StaQuickResponeForRateUpExec( pAd->DrsCounters.TxRateUpPenalty = 0; // no penalty pAd->DrsCounters.TxQuality[pAd->CommonCfg.TxRateIndex] = 0; pAd->DrsCounters.PER[pAd->CommonCfg.TxRateIndex] = 0; +#ifdef RT2870 + bTxRateChanged = TRUE; +#endif } else { @@ -2848,7 +2775,13 @@ VOID MlmeCheckPsmChange( if (INFRA_ON(pAd) && (PowerMode != Ndis802_11PowerModeCAM) && (pAd->StaCfg.Psm == PWR_ACTIVE) && +#ifdef RT2860 RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP)) +#endif +#if !defined(RT2860) && !defined(RT30xx) + (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)) +#endif +#ifndef RT30xx { NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime); pAd->RalinkCounters.RxCountSinceLastNULL = 0; @@ -2862,6 +2795,42 @@ VOID MlmeCheckPsmChange( RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE); } } +#endif +#ifdef RT30xx +// (! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) + (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) /*&& + (pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) && + (pAd->RalinkCounters.OneSecTxRetryOkCount == 0)*/) + { + // add by johnli, use Rx OK data count per second to calculate throughput + // If Ttraffic is too high ( > 400 Rx per second), don't go to sleep mode. If tx rate is low, use low criteria + // Mode=CCK/MCS=3 => 11 Mbps, Mode=OFDM/MCS=3 => 18 Mbps + if (((pAd->StaCfg.HTPhyMode.field.MCS <= 3) && +/* Iverson mark + (pAd->StaCfg.HTPhyMode.field.MODE <= MODE_OFDM) && +*/ + (pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)100)) || + ((pAd->StaCfg.HTPhyMode.field.MCS > 3) && +/* Iverson mark + (pAd->StaCfg.HTPhyMode.field.MODE > MODE_OFDM) && +*/ + (pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)400))) + { + // Get this time + NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime); + pAd->RalinkCounters.RxCountSinceLastNULL = 0; + MlmeSetPsmBit(pAd, PWR_SAVE); + if (!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable)) + { + RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE); + } + else + { + RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE); + } + } + } +#endif } // IRQL = PASSIVE_LEVEL @@ -2876,10 +2845,10 @@ VOID MlmeSetPsmBit( RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word); csr4.field.AckCtsPsmBit = (psm == PWR_SAVE)? 1:0; RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word); +#ifndef RT30xx DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetPsmBit = %d\n", psm)); +#endif } -#endif // CONFIG_STA_SUPPORT // - // IRQL = DISPATCH_LEVEL VOID MlmeSetTxPreamble( @@ -3018,9 +2987,6 @@ VOID MlmeUpdateTxRates( //=========================================================================== //=========================================================================== - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pHtPhy = &pAd->StaCfg.HTPhyMode; pMaxHtPhy = &pAd->StaCfg.MaxHTPhyMode; @@ -3036,7 +3002,6 @@ VOID MlmeUpdateTxRates( MaxDesire = RATE_11; } } -#endif // CONFIG_STA_SUPPORT // pAd->CommonCfg.MaxDesiredRate = MaxDesire; pMinHtPhy->word = 0; @@ -3065,7 +3030,6 @@ VOID MlmeUpdateTxRates( } #endif -#ifdef CONFIG_STA_SUPPORT if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) { pSupRate = &pAd->StaActive.SupRate[0]; @@ -3074,7 +3038,6 @@ VOID MlmeUpdateTxRates( ExtRateLen = pAd->StaActive.ExtRateLen; } else -#endif // CONFIG_STA_SUPPORT // { pSupRate = &pAd->CommonCfg.SupRate[0]; pExtRate = &pAd->CommonCfg.ExtRate[0]; @@ -3151,10 +3114,9 @@ VOID MlmeUpdateTxRates( if (*auto_rate_cur_p) { short dbm = 0; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta; -#endif // CONFIG_STA_SUPPORT // + + dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta; + if (bLinkUp == TRUE) pAd->CommonCfg.TxRate = RATE_24; else @@ -3212,9 +3174,7 @@ VOID MlmeUpdateTxRates( { case PHY_11BG_MIXED: case PHY_11B: -#ifdef DOT11_N_SUPPORT case PHY_11BGN_MIXED: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.MlmeRate = RATE_1; pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK; pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1; @@ -3222,22 +3182,18 @@ VOID MlmeUpdateTxRates( break; case PHY_11G: case PHY_11A: -#ifdef DOT11_N_SUPPORT case PHY_11AGN_MIXED: case PHY_11GN_MIXED: case PHY_11N_2_4G: case PHY_11AN_MIXED: case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // pAd->CommonCfg.MlmeRate = RATE_6; pAd->CommonCfg.RtsRate = RATE_6; pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM; pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate]; break; case PHY_11ABG_MIXED: -#ifdef DOT11_N_SUPPORT case PHY_11ABGN_MIXED: -#endif // DOT11_N_SUPPORT // if (pAd->CommonCfg.Channel <= 14) { pAd->CommonCfg.MlmeRate = RATE_1; @@ -3280,7 +3236,6 @@ VOID MlmeUpdateTxRates( pAd->CommonCfg.MlmeTransmit.word, pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word )); } -#ifdef DOT11_N_SUPPORT /* ========================================================================== Description: @@ -3313,8 +3268,6 @@ VOID MlmeUpdateHtTxRates( auto_rate_cur_p = NULL; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pDesireHtPhy = &pAd->StaCfg.DesiredHtPhyInfo; pActiveHtPhy = &pAd->StaCfg.DesiredHtPhyInfo; @@ -3324,9 +3277,7 @@ VOID MlmeUpdateHtTxRates( auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch; } -#endif // CONFIG_STA_SUPPORT // -#ifdef CONFIG_STA_SUPPORT if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) { if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) @@ -3342,7 +3293,6 @@ VOID MlmeUpdateHtTxRates( pMaxHtPhy->field.STBC = STBC_NONE; } else -#endif // CONFIG_STA_SUPPORT // { if (pDesireHtPhy->bHtEnable == FALSE) return; @@ -3393,7 +3343,6 @@ VOID MlmeUpdateHtTxRates( pMinHtPhy->field.STBC = 0; pMinHtPhy->field.ShortGI = 0; //If STA assigns fixed rate. update to fixed here. -#ifdef CONFIG_STA_SUPPORT if ( (pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff)) { if (pDesireHtPhy->MCSSet[4] != 0) @@ -3417,8 +3366,6 @@ VOID MlmeUpdateHtTxRates( break; } } -#endif // CONFIG_STA_SUPPORT // - // Decide ht rate pHtPhy->field.STBC = pMaxHtPhy->field.STBC; @@ -3438,7 +3385,6 @@ VOID MlmeUpdateHtTxRates( pHtPhy->field.BW, pHtPhy->field.ShortGI, pHtPhy->field.MODE)); DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== \n")); } -#endif // DOT11_N_SUPPORT // // IRQL = DISPATCH_LEVEL VOID MlmeRadioOff( @@ -3483,7 +3429,6 @@ VOID BssTableInit( } } -#ifdef DOT11_N_SUPPORT VOID BATableInit( IN PRTMP_ADAPTER pAd, IN BA_TABLE *Tab) @@ -3503,7 +3448,6 @@ VOID BATableInit( Tab->BAOriEntry[i].ORI_BA_Status = Originator_NONE; } } -#endif // DOT11_N_SUPPORT // /*! \brief search the BSS table by SSID * \param p_tab pointer to the bss table @@ -3613,7 +3557,6 @@ VOID BssTableDeleteEntry( } } -#ifdef DOT11_N_SUPPORT /* ======================================================================== Routine Description: @@ -3645,7 +3588,6 @@ VOID BATableDeleteORIEntry( NdisReleaseSpinLock(&pAd->BATabLock); } } -#endif // DOT11_N_SUPPORT // /*! \brief * \param @@ -3762,7 +3704,7 @@ VOID BssEntrySet( pBss->AddHtInfoLen = 0; pBss->HtCapabilityLen = 0; -#ifdef DOT11_N_SUPPORT + if (HtCapabilityLen> 0) { pBss->HtCapabilityLen = HtCapabilityLen; @@ -3782,7 +3724,6 @@ VOID BssEntrySet( } } } -#endif // DOT11_N_SUPPORT // BssCipherParse(pBss); @@ -3800,8 +3741,6 @@ VOID BssEntrySet( else pBss->QbssLoad.bValid = FALSE; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { PEID_STRUCT pEid; USHORT Length = 0; @@ -3809,11 +3748,9 @@ VOID BssEntrySet( NdisZeroMemory(&pBss->WpaIE.IE[0], MAX_CUSTOM_LEN); NdisZeroMemory(&pBss->RsnIE.IE[0], MAX_CUSTOM_LEN); -#ifdef EXT_BUILD_CHANNEL_LIST - NdisZeroMemory(&pBss->CountryString[0], 3); - pBss->bHasCountryIE = FALSE; -#endif // EXT_BUILD_CHANNEL_LIST // + pEid = (PEID_STRUCT) pVIE; + while ((Length + 2 + (USHORT)pEid->Len) <= LengthVIE) { switch(pEid->Eid) @@ -3842,18 +3779,11 @@ VOID BssEntrySet( NdisMoveMemory(pBss->RsnIE.IE, pEid, pBss->RsnIE.IELen); } break; -#ifdef EXT_BUILD_CHANNEL_LIST - case IE_COUNTRY: - NdisMoveMemory(&pBss->CountryString[0], pEid->Octet, 3); - pBss->bHasCountryIE = TRUE; - break; -#endif // EXT_BUILD_CHANNEL_LIST // } Length = Length + 2 + (USHORT)pEid->Len; // Eid[1] + Len[1]+ content[Len] pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len); } } -#endif // CONFIG_STA_SUPPORT // } /*! @@ -3947,119 +3877,22 @@ ULONG BssTableSetEntry( } else { +#ifdef RT30xx + /* avoid Hidden SSID form beacon to overwirite correct SSID from probe response */ + if ((SSID_EQUAL(Ssid, SsidLen, Tab->BssEntry[Idx].Ssid, Tab->BssEntry[Idx].SsidLen)) || + (NdisEqualMemory(Tab->BssEntry[Idx].Ssid, ZeroSsid, Tab->BssEntry[Idx].SsidLen))) + { +#endif BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod,CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen, NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE); - } - - return Idx; -} - -#ifdef CONFIG_STA_SUPPORT -#ifdef DOT11_N_SUPPORT -#ifdef DOT11N_DRAFT3 -VOID TriEventInit( - IN PRTMP_ADAPTER pAd) -{ - UCHAR i; - - for (i = 0;i < MAX_TRIGGER_EVENT;i++) - pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE; - - pAd->CommonCfg.TriggerEventTab.EventANo = 0; - pAd->CommonCfg.TriggerEventTab.EventBCountDown = 0; -} - -ULONG TriEventTableSetEntry( - IN PRTMP_ADAPTER pAd, - OUT TRIGGER_EVENT_TAB *Tab, - IN PUCHAR pBssid, - IN HT_CAPABILITY_IE *pHtCapability, - IN UCHAR HtCapabilityLen, - IN UCHAR RegClass, - IN UCHAR ChannelNo) -{ - // Event A - if (HtCapabilityLen == 0) - { - if (Tab->EventANo < MAX_TRIGGER_EVENT) - { - RTMPMoveMemory(Tab->EventA[Tab->EventANo].BSSID, pBssid, 6); - Tab->EventA[Tab->EventANo].bValid = TRUE; - Tab->EventA[Tab->EventANo].Channel = ChannelNo; - Tab->EventA[Tab->EventANo].CDCounter = pAd->CommonCfg.Dot11BssWidthChanTranDelay; - if (RegClass != 0) - { - // Beacon has Regulatory class IE. So use beacon's - Tab->EventA[Tab->EventANo].RegClass = RegClass; - } - else - { - // Use Station's Regulatory class instead. - if (pAd->StaActive.SupportedHtPhy.bHtEnable == TRUE) - { - if (pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) - { - Tab->EventA[Tab->EventANo].RegClass = 32; - } - else if (pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) - Tab->EventA[Tab->EventANo].RegClass = 33; - } - else - Tab->EventA[Tab->EventANo].RegClass = ??; - - } - - Tab->EventANo ++; - } - } - else if (pHtCapability->HtCapInfo.Intolerant40) - { - Tab->EventBCountDown = pAd->CommonCfg.Dot11BssWidthChanTranDelay; - } - -} - -/* - ======================================================================== - Routine Description: - Trigger Event table Maintainence called once every second. - - Arguments: - // IRQL = DISPATCH_LEVEL - ======================================================================== -*/ -VOID TriEventCounterMaintenance( - IN PRTMP_ADAPTER pAd) -{ - UCHAR i; - BOOLEAN bNotify = FALSE; - for (i = 0;i < MAX_TRIGGER_EVENT;i++) - { - if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid && (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter > 0)) - { - pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter--; - if (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter == 0) - { - pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE; - pAd->CommonCfg.TriggerEventTab.EventANo --; - // Need to send 20/40 Coexistence Notify frame if has status change. - bNotify = TRUE; - } +#ifdef RT30xx } - } - if (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0) - { - pAd->CommonCfg.TriggerEventTab.EventBCountDown--; - if (pAd->CommonCfg.TriggerEventTab.EventBCountDown == 0) - bNotify = TRUE; +#endif } - if (bNotify == TRUE) - Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE); + return Idx; } -#endif // DOT11N_DRAFT3 // -#endif // DOT11_N_SUPPORT // // IRQL = DISPATCH_LEVEL VOID BssTableSsidSort( @@ -4079,9 +3912,6 @@ VOID BssTableSsidSort( if (((pAd->CommonCfg.bIEEE80211H == 1) && (pAd->MlmeAux.Channel > 14) && RadarChannelCheck(pAd, pInBss->Channel)) -#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier - || (pAd->CommonCfg.CarrierDetect.Enable == TRUE) -#endif // CARRIER_DETECTION_SUPPORT // ) { if (pInBss->Hidden) @@ -4093,18 +3923,6 @@ VOID BssTableSsidSort( { BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr]; - -#ifdef EXT_BUILD_CHANNEL_LIST - // If no Country IE exists no Connection will be established when IEEE80211dClientMode is strict. - if ((pAd->StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict) && - (pInBss->bHasCountryIE == FALSE)) - { - DBGPRINT(RT_DEBUG_TRACE,("StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict, but this AP doesn't have country IE.\n")); - continue; - } -#endif // EXT_BUILD_CHANNEL_LIST // - -#ifdef DOT11_N_SUPPORT // 2.4G/5G N only mode if ((pInBss->HtCapabilityLen == 0) && ((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))) @@ -4112,7 +3930,6 @@ VOID BssTableSsidSort( DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n")); continue; } -#endif // DOT11_N_SUPPORT // // New for WPA2 // Check the Authmode first @@ -4132,9 +3949,14 @@ VOID BssTableSsidSort( continue; // check group cipher +#ifndef RT30xx if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) && (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled)) +#endif +#ifdef RT30xx + if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) +#endif continue; // check pairwise cipher, skip if none matched @@ -4153,9 +3975,14 @@ VOID BssTableSsidSort( continue; // check group cipher +#ifndef RT30xx if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) && (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled)) +#endif +#ifdef RT30xx + if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher) +#endif continue; // check pairwise cipher, skip if none matched @@ -4185,7 +4012,6 @@ VOID BssTableSsidSort( if (SsidLen == 0) continue; -#ifdef DOT11_N_SUPPORT // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, if ((pInBss->CentralChannel != pInBss->Channel) && @@ -4205,7 +4031,6 @@ VOID BssTableSsidSort( } } } -#endif // DOT11_N_SUPPORT // // copy matching BSS from InTab to OutTab NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY)); @@ -4216,8 +4041,6 @@ VOID BssTableSsidSort( { BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr]; - -#ifdef DOT11_N_SUPPORT // 2.4G/5G N only mode if ((pInBss->HtCapabilityLen == 0) && ((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))) @@ -4225,7 +4048,6 @@ VOID BssTableSsidSort( DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n")); continue; } -#endif // DOT11_N_SUPPORT // // New for WPA2 // Check the Authmode first @@ -4281,7 +4103,6 @@ VOID BssTableSsidSort( else if (pAd->StaCfg.WepStatus != pInBss->WepStatus) continue; -#ifdef DOT11_N_SUPPORT // If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region // If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead, if ((pInBss->CentralChannel != pInBss->Channel) && @@ -4294,7 +4115,6 @@ VOID BssTableSsidSort( pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40; } } -#endif // DOT11_N_SUPPORT // // copy matching BSS from InTab to OutTab NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY)); @@ -4330,8 +4150,6 @@ VOID BssTableSortByRssi( } } } -#endif // CONFIG_STA_SUPPORT // - VOID BssCipherParse( IN OUT PBSS_ENTRY pBss) @@ -4442,10 +4260,16 @@ VOID BssCipherParse( switch (*pTmp) { case 1: +#ifndef RT30xx pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled; break; case 5: pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled; +#endif +#ifdef RT30xx + case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway + pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled; +#endif break; case 2: pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled; @@ -4532,7 +4356,6 @@ VOID BssCipherParse( pBss->AuthMode = Ndis802_11AuthModeWPANone; pBss->AuthModeAux = Ndis802_11AuthModeWPANone; pBss->WepStatus = pBss->WPA.GroupCipher; - // Patched bugs for old driver if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled) pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher; } @@ -4562,10 +4385,16 @@ VOID BssCipherParse( switch (pCipher->Type) { case 1: +#ifndef RT30xx pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled; break; case 5: pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled; +#endif +#ifdef RT30xx + case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway + pBss->WPA2.GroupCipher = Ndis802_11Encryption1Enabled; +#endif break; case 2: pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled; @@ -4659,7 +4488,6 @@ VOID BssCipherParse( pBss->WPA.PairCipherAux = pBss->WPA2.PairCipherAux; pBss->WPA.GroupCipher = pBss->WPA2.GroupCipher; pBss->WepStatus = pBss->WPA.GroupCipher; - // Patched bugs for old driver if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled) pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher; } @@ -4735,10 +4563,9 @@ VOID MgtMacHeaderInit( pHdr80211->FC.SubType = SubType; pHdr80211->FC.ToDs = ToDs; COPY_MAC_ADDR(pHdr80211->Addr1, pDA); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress); -#endif // CONFIG_STA_SUPPORT // + + COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress); + COPY_MAC_ADDR(pHdr80211->Addr3, pBssid); } @@ -4925,12 +4752,6 @@ BOOLEAN MlmeEnqueueForRecv( INT MsgType; MLME_QUEUE *Queue = (MLME_QUEUE *)&pAd->Mlme.Queue; -#ifdef RALINK_ATE - /* Nothing to do in ATE mode */ - if(ATE_ON(pAd)) - return FALSE; -#endif // RALINK_ATE // - // Do nothing if the driver is starting halt state. // This might happen when timer already been fired before cancel timer with mlmehalt if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) @@ -4951,8 +4772,6 @@ BOOLEAN MlmeEnqueueForRecv( return FALSE; } -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType)) { @@ -4960,7 +4779,6 @@ BOOLEAN MlmeEnqueueForRecv( return FALSE; } } -#endif // CONFIG_STA_SUPPORT // // OK, we got all the informations, it is time to put things into queue NdisAcquireSpinLock(&(Queue->Lock)); @@ -5028,13 +4846,14 @@ BOOLEAN MlmeDequeue( VOID MlmeRestartStateMachine( IN PRTMP_ADAPTER pAd) { +#ifdef RT2860 MLME_QUEUE_ELEM *Elem = NULL; -#ifdef CONFIG_STA_SUPPORT +#endif BOOLEAN Cancelled; -#endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n")); +#ifdef RT2860 NdisAcquireSpinLock(&pAd->Mlme.TaskLock); if(pAd->Mlme.bRunning) { @@ -5062,13 +4881,9 @@ VOID MlmeRestartStateMachine( DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n")); } } +#endif /* RT2860 */ -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef QOS_DLS_SUPPORT - UCHAR i; -#endif // QOS_DLS_SUPPORT // // Cancel all timer events // Be careful to cancel new added timer RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled); @@ -5077,15 +4892,7 @@ VOID MlmeRestartStateMachine( RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); - -#ifdef QOS_DLS_SUPPORT - for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++) - { - RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled); - } -#endif // QOS_DLS_SUPPORT // } -#endif // CONFIG_STA_SUPPORT // // Change back to original channel in case of doing scan AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); @@ -5094,8 +4901,6 @@ VOID MlmeRestartStateMachine( // Resume MSDU which is turned off durning scan RTMPResumeMsduTransmission(pAd); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // Set all state machines back IDLE pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; @@ -5104,16 +4909,14 @@ VOID MlmeRestartStateMachine( pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE; pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE; pAd->Mlme.ActMachine.CurrState = ACT_IDLE; -#ifdef QOS_DLS_SUPPORT - pAd->Mlme.DlsMachine.CurrState = DLS_IDLE; -#endif // QOS_DLS_SUPPORT // } -#endif // CONFIG_STA_SUPPORT // +#ifdef RT2860 // Remove running state NdisAcquireSpinLock(&pAd->Mlme.TaskLock); pAd->Mlme.bRunning = FALSE; NdisReleaseSpinLock(&pAd->Mlme.TaskLock); +#endif } /*! \brief test if the MLME Queue is empty @@ -5191,7 +4994,6 @@ VOID MlmeQueueDestroy( IRQL = DISPATCH_LEVEL */ -#ifdef CONFIG_STA_SUPPORT BOOLEAN MsgTypeSubst( IN PRTMP_ADAPTER pAd, IN PFRAME_802_11 pFrame, @@ -5215,16 +5017,6 @@ BOOLEAN MsgTypeSubst( *MsgType = MT2_AIRONET_MSG; return (TRUE); } -#ifdef LEAP_SUPPORT - if ( pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP ) //LEAP - { - // LEAP frames - *Machine = LEAP_STATE_MACHINE; - EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1); - return (LeapMsgTypeSubst(EAPType, MsgType)); - } - else -#endif // LEAP_SUPPORT // { *Machine = WPA_PSK_STATE_MACHINE; EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1); @@ -5311,7 +5103,6 @@ BOOLEAN MsgTypeSubst( return TRUE; } -#endif // CONFIG_STA_SUPPORT // // =========================================================================================== // state_machine.c @@ -5533,7 +5324,6 @@ VOID AsicUpdateAutoFallBackTable( } } break; -#ifdef DOT11_N_SUPPORT case 2: //HT-MIX case 3: //HT-GF { @@ -5595,7 +5385,6 @@ VOID AsicUpdateAutoFallBackTable( } } break; -#endif // DOT11_N_SUPPORT // } pNextTxRate = pCurrTxRate; @@ -5637,12 +5426,6 @@ VOID AsicUpdateProtect( UCHAR i; UINT32 MacReg = 0; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - -#ifdef DOT11_N_SUPPORT if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8)) { return; @@ -5656,19 +5439,14 @@ VOID AsicUpdateProtect( SetMask = ALLN_SETPROTECT; OperationMode = 8; } -#endif // DOT11_N_SUPPORT // // Config ASIC RTS threshold register RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg); MacReg &= 0xFF0000FF; -#if 0 - MacReg |= (pAd->CommonCfg.RtsThreshold << 8); -#else + // If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096 if (( -#ifdef DOT11_N_SUPPORT (pAd->CommonCfg.BACapability.field.AmsduEnable) || -#endif // DOT11_N_SUPPORT // (pAd->CommonCfg.bAggregationCapable == TRUE)) && pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD) { @@ -5678,7 +5456,6 @@ VOID AsicUpdateProtect( { MacReg |= (pAd->CommonCfg.RtsThreshold << 8); } -#endif RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg); @@ -5717,7 +5494,6 @@ VOID AsicUpdateProtect( Protect[1] = ProtCfg.word; } -#ifdef DOT11_N_SUPPORT // Decide HT frame protection. if ((SetMask & ALLN_SETPROTECT) != 0) { @@ -5848,7 +5624,6 @@ VOID AsicUpdateProtect( break; } } -#endif // DOT11_N_SUPPORT // offset = CCK_PROT_CFG; for (i = 0;i < 6;i++) @@ -5860,6 +5635,276 @@ VOID AsicUpdateProtect( } } +#ifdef RT30xx +/* + ======================================================================== + + Routine Description: Write RT30xx RF register through MAC + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +NTSTATUS RT30xxWriteRFRegister( + IN PRTMP_ADAPTER pAd, + IN UCHAR RegID, + IN UCHAR Value) +{ + RF_CSR_CFG_STRUC rfcsr; + UINT i = 0; + + do + { + RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word); + + if (!rfcsr.field.RF_CSR_KICK) + break; + i++; + } + while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))); + + if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) + { + DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n")); + return STATUS_UNSUCCESSFUL; + } + + rfcsr.field.RF_CSR_WR = 1; + rfcsr.field.RF_CSR_KICK = 1; + rfcsr.field.TESTCSR_RFACC_REGNUM = RegID; + rfcsr.field.RF_CSR_DATA = Value; + + RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word); + + return STATUS_SUCCESS; +} + + +/* + ======================================================================== + + Routine Description: Read RT30xx RF register through MAC + + Arguments: + + Return Value: + + IRQL = + + Note: + + ======================================================================== +*/ +NTSTATUS RT30xxReadRFRegister( + IN PRTMP_ADAPTER pAd, + IN UCHAR RegID, + IN PUCHAR pValue) +{ + RF_CSR_CFG_STRUC rfcsr; + UINT i=0, k=0; + + for (i=0; i<MAX_BUSY_COUNT; i++) + { + RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word); + + if (rfcsr.field.RF_CSR_KICK == BUSY) + { + continue; + } + rfcsr.word = 0; + rfcsr.field.RF_CSR_WR = 0; + rfcsr.field.RF_CSR_KICK = 1; + rfcsr.field.TESTCSR_RFACC_REGNUM = RegID; + RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word); + for (k=0; k<MAX_BUSY_COUNT; k++) + { + RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word); + + if (rfcsr.field.RF_CSR_KICK == IDLE) + break; + } + if ((rfcsr.field.RF_CSR_KICK == IDLE) && + (rfcsr.field.TESTCSR_RFACC_REGNUM == RegID)) + { + *pValue = (UCHAR)rfcsr.field.RF_CSR_DATA; + break; + } + } + if (rfcsr.field.RF_CSR_KICK == BUSY) + { + DBGPRINT_ERR(("RF read R%d=0x%x fail, i[%d], k[%d]\n", RegID, rfcsr.word,i,k)); + return STATUS_UNSUCCESSFUL; + } + + return STATUS_SUCCESS; +} +#endif // RT30xx // + +#ifdef RT30xx +// add by johnli, RF power sequence setup +/* + ========================================================================== + Description: + + Load RF normal operation-mode setup + + ========================================================================== + */ +VOID RT30xxLoadRFNormalModeSetup( + IN PRTMP_ADAPTER pAd) +{ + UCHAR RFValue; + + // RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1 + RT30xxReadRFRegister(pAd, RF_R01, &RFValue); + RFValue = (RFValue & (~0x0C)) | 0x31; + RT30xxWriteRFRegister(pAd, RF_R01, RFValue); + + // TX_LO2_en, RF R15 register Bit 3 to 0 + RT30xxReadRFRegister(pAd, RF_R15, &RFValue); + RFValue &= (~0x08); + RT30xxWriteRFRegister(pAd, RF_R15, RFValue); + + // TX_LO1_en, RF R17 register Bit 3 to 0 + RT30xxReadRFRegister(pAd, RF_R17, &RFValue); + RFValue &= (~0x08); + // to fix rx long range issue + if (((pAd->MACVersion & 0xffff) >= 0x0211) && (pAd->NicConfig2.field.ExternalLNAForG == 0)) + { + RFValue |= 0x20; + } + RT30xxWriteRFRegister(pAd, RF_R17, RFValue); + + // RX_LO1_en, RF R20 register Bit 3 to 0 + RT30xxReadRFRegister(pAd, RF_R20, &RFValue); + RFValue &= (~0x08); + RT30xxWriteRFRegister(pAd, RF_R20, RFValue); + + // RX_LO2_en, RF R21 register Bit 3 to 0 + RT30xxReadRFRegister(pAd, RF_R21, &RFValue); + RFValue &= (~0x08); + RT30xxWriteRFRegister(pAd, RF_R21, RFValue); + + // LDORF_VC, RF R27 register Bit 2 to 0 + RT30xxReadRFRegister(pAd, RF_R27, &RFValue); + if ((pAd->MACVersion & 0xffff) < 0x0211) + RFValue = (RFValue & (~0x77)) | 0x3; + else + RFValue = (RFValue & (~0x77)); + RT30xxWriteRFRegister(pAd, RF_R27, RFValue); + /* end johnli */ +} + +/* + ========================================================================== + Description: + + Load RF sleep-mode setup + + ========================================================================== + */ +VOID RT30xxLoadRFSleepModeSetup( + IN PRTMP_ADAPTER pAd) +{ + UCHAR RFValue; + UINT32 MACValue; + + // RF_BLOCK_en. RF R1 register Bit 0 to 0 + RT30xxReadRFRegister(pAd, RF_R01, &RFValue); + RFValue &= (~0x01); + RT30xxWriteRFRegister(pAd, RF_R01, RFValue); + + // VCO_IC, RF R7 register Bit 4 & Bit 5 to 0 + RT30xxReadRFRegister(pAd, RF_R07, &RFValue); + RFValue &= (~0x30); + RT30xxWriteRFRegister(pAd, RF_R07, RFValue); + + // Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0 + RT30xxReadRFRegister(pAd, RF_R09, &RFValue); + RFValue &= (~0x0E); + RT30xxWriteRFRegister(pAd, RF_R09, RFValue); + + // RX_CTB_en, RF R21 register Bit 7 to 0 + RT30xxReadRFRegister(pAd, RF_R21, &RFValue); + RFValue &= (~0x80); + RT30xxWriteRFRegister(pAd, RF_R21, RFValue); + + // LDORF_VC, RF R27 register Bit 0, Bit 1 & Bit 2 to 1 + RT30xxReadRFRegister(pAd, RF_R27, &RFValue); + RFValue |= 0x77; + RT30xxWriteRFRegister(pAd, RF_R27, RFValue); + + RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue); + MACValue |= 0x1D000000; + RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue); +} + +/* + ========================================================================== + Description: + + Reverse RF sleep-mode setup + + ========================================================================== + */ +VOID RT30xxReverseRFSleepModeSetup( + IN PRTMP_ADAPTER pAd) +{ + UCHAR RFValue; + UINT32 MACValue; + + // RF_BLOCK_en, RF R1 register Bit 0 to 1 + RT30xxReadRFRegister(pAd, RF_R01, &RFValue); + RFValue |= 0x01; + RT30xxWriteRFRegister(pAd, RF_R01, RFValue); + + // VCO_IC, RF R7 register Bit 4 & Bit 5 to 1 + RT30xxReadRFRegister(pAd, RF_R07, &RFValue); + RFValue |= 0x30; + RT30xxWriteRFRegister(pAd, RF_R07, RFValue); + + // Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1 + RT30xxReadRFRegister(pAd, RF_R09, &RFValue); + RFValue |= 0x0E; + RT30xxWriteRFRegister(pAd, RF_R09, RFValue); + + // RX_CTB_en, RF R21 register Bit 7 to 1 + RT30xxReadRFRegister(pAd, RF_R21, &RFValue); + RFValue |= 0x80; + RT30xxWriteRFRegister(pAd, RF_R21, RFValue); + + // LDORF_VC, RF R27 register Bit 2 to 0 + RT30xxReadRFRegister(pAd, RF_R27, &RFValue); + if ((pAd->MACVersion & 0xffff) < 0x0211) + RFValue = (RFValue & (~0x77)) | 0x3; + else + RFValue = (RFValue & (~0x77)); + RT30xxWriteRFRegister(pAd, RF_R27, RFValue); + + // RT3071 version E has fixed this issue + if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211)) + { + // patch tx EVM issue temporarily + RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue); + MACValue = ((MACValue & 0xE0FFFFFF) | 0x0D000000); + RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue); + } + else + { + RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue); + MACValue = ((MACValue & 0xE0FFFFFF) | 0x01000000); + RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue); + } +} +// end johnli +#endif // RT30xx // + /* ========================================================================== Description: @@ -5881,6 +5926,21 @@ VOID AsicSwitchChannel( RTMP_RF_REGS *RFRegTable; // Search Tx power value +#ifdef RT30xx + // We can't use ChannelList to search channel, since some central channl's txpowr doesn't list + // in ChannelList, so use TxPower array instead. + // + for (index = 0; index < MAX_NUM_OF_CHANNELS; index++) + { + if (Channel == pAd->TxPower[index].Channel) + { + TxPwer = pAd->TxPower[index].Power; + TxPwer2 = pAd->TxPower[index].Power2; + break; + } + } +#endif +#ifndef RT30xx for (index = 0; index < pAd->ChannelListNum; index++) { if (Channel == pAd->ChannelList[index].Channel) @@ -5890,12 +5950,152 @@ VOID AsicSwitchChannel( break; } } +#endif if (index == MAX_NUM_OF_CHANNELS) { +#ifndef RT30xx DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Cant find the Channel#%d \n", Channel)); +#endif +#ifdef RT30xx + DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Can't find the Channel#%d \n", Channel)); +#endif } +#ifdef RT2870 + // The RF programming sequence is difference between 3xxx and 2xxx +#ifdef RT30xx + if ((IS_RT3070(pAd) || IS_RT3090(pAd)) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020) || + (pAd->RfIcType == RFIC_3021) || (pAd->RfIcType == RFIC_3022))) +#endif +#ifndef RT30xx + if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) +#endif + { + /* modify by WY for Read RF Reg. error */ + UCHAR RFValue; + + for (index = 0; index < NUM_OF_3020_CHNL; index++) + { + if (Channel == FreqItems3020[index].Channel) + { + // Programming channel parameters + RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N); + RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K); + +#ifndef RT30xx + RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RFValue); + RFValue = (RFValue & 0xFC) | FreqItems3020[index].R; + RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RFValue); + + // Set Tx Power + RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue); + RFValue = (RFValue & 0xE0) | TxPwer; + RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue); + + // Set RF offset + RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue); + RFValue = (RFValue & 0x80) | pAd->RfFreqOffset; + RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue); +#endif +#ifdef RT30xx + RT30xxReadRFRegister(pAd, RF_R06, &RFValue); + RFValue = (RFValue & 0xFC) | FreqItems3020[index].R; + RT30xxWriteRFRegister(pAd, RF_R06, RFValue); + + // Set Tx0 Power + RT30xxReadRFRegister(pAd, RF_R12, &RFValue); + RFValue = (RFValue & 0xE0) | TxPwer; + RT30xxWriteRFRegister(pAd, RF_R12, RFValue); + + // Set Tx1 Power + RT30xxReadRFRegister(pAd, RF_R13, &RFValue); + RFValue = (RFValue & 0xE0) | TxPwer2; + RT30xxWriteRFRegister(pAd, RF_R13, RFValue); + + // Tx/Rx Stream setting + RT30xxReadRFRegister(pAd, RF_R01, &RFValue); + //if (IS_RT3090(pAd)) + // RFValue |= 0x01; // Enable RF block. + RFValue &= 0x03; //clear bit[7~2] + if (pAd->Antenna.field.TxPath == 1) + RFValue |= 0xA0; + else if (pAd->Antenna.field.TxPath == 2) + RFValue |= 0x80; + if (pAd->Antenna.field.RxPath == 1) + RFValue |= 0x50; + else if (pAd->Antenna.field.RxPath == 2) + RFValue |= 0x40; + RT30xxWriteRFRegister(pAd, RF_R01, RFValue); + + // Set RF offset + RT30xxReadRFRegister(pAd, RF_R23, &RFValue); + RFValue = (RFValue & 0x80) | pAd->RfFreqOffset; + RT30xxWriteRFRegister(pAd, RF_R23, RFValue); +#endif + + // Set BW + if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40)) + { + RFValue = pAd->Mlme.CaliBW40RfR24; + //DISABLE_11N_CHECK(pAd); + } + else + { + RFValue = pAd->Mlme.CaliBW20RfR24; + } +#ifndef RT30xx + RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR)RFValue); + + // Enable RF tuning + RT30xxReadRFRegister(pAd, RF_R07, (PUCHAR)&RFValue); + RFValue = RFValue | 0x1; + RT30xxWriteRFRegister(pAd, RF_R07, (UCHAR)RFValue); + + // latch channel for future usage. + pAd->LatchRfRegs.Channel = Channel; +#endif +#ifdef RT30xx + RT30xxWriteRFRegister(pAd, RF_R24, RFValue); + RT30xxWriteRFRegister(pAd, RF_R31, RFValue); + + // Enable RF tuning + RT30xxReadRFRegister(pAd, RF_R07, &RFValue); + RFValue = RFValue | 0x1; + RT30xxWriteRFRegister(pAd, RF_R07, RFValue); + + // latch channel for future usage. + pAd->LatchRfRegs.Channel = Channel; + + DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n", + Channel, + pAd->RfIcType, + TxPwer, + TxPwer2, + pAd->Antenna.field.TxPath, + FreqItems3020[index].N, + FreqItems3020[index].K, + FreqItems3020[index].R)); +#endif + + break; + } + } + +#ifndef RT30xx + DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n", + Channel, + pAd->RfIcType, + TxPwer, + TxPwer2, + pAd->Antenna.field.TxPath, + FreqItems3020[index].N, + FreqItems3020[index].K, + FreqItems3020[index].R)); +#endif + } + else +#endif // RT2870 // { RFRegTable = RF2850RegTable; @@ -6149,6 +6349,53 @@ VOID AsicAntennaSelect( IN PRTMP_ADAPTER pAd, IN UCHAR Channel) { +#ifdef RT30xx + if (pAd->Mlme.OneSecPeriodicRound % 2 == 1) + { + // patch for AsicSetRxAnt failed + pAd->RxAnt.EvaluatePeriod = 0; + + // check every 2 second. If rcv-beacon less than 5 in the past 2 second, then AvgRSSI is no longer a + // valid indication of the distance between this AP and its clients. + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) + { + SHORT realavgrssi1; + + // if no traffic then reset average rssi to trigger evaluation + if (pAd->StaCfg.NumOfAvgRssiSample < 5) + { + pAd->RxAnt.Pair1LastAvgRssi = (-99); + pAd->RxAnt.Pair2LastAvgRssi = (-99); + DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no traffic/beacon, reset RSSI\n")); + } + + pAd->StaCfg.NumOfAvgRssiSample = 0; + realavgrssi1 = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt] >> 3); + + DBGPRINT(RT_DEBUG_TRACE,("Ant-realrssi0(%d), Lastrssi0(%d), EvaluateStableCnt=%d\n", realavgrssi1, pAd->RxAnt.Pair1LastAvgRssi, pAd->RxAnt.EvaluateStableCnt)); + + // if the difference between two rssi is larger or less than 5, then evaluate the other antenna + if ((pAd->RxAnt.EvaluateStableCnt < 2) || (realavgrssi1 > (pAd->RxAnt.Pair1LastAvgRssi + 5)) || (realavgrssi1 < (pAd->RxAnt.Pair1LastAvgRssi - 5))) + { + pAd->RxAnt.Pair1LastAvgRssi = realavgrssi1; + AsicEvaluateRxAnt(pAd); + } + } + else + { + // if not connected, always switch antenna to try to connect + UCHAR temp; + + temp = pAd->RxAnt.Pair1PrimaryRxAnt; + pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt; + pAd->RxAnt.Pair1SecondaryRxAnt = temp; + + DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no connect, switch to another one to try connection\n")); + + AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); + } + } +#endif /* RT30xx */ } /* @@ -6218,11 +6465,13 @@ VOID AsicAdjustTxPower( ULONG TxPwr[5]; CHAR Value; +#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) || (pAd->bPCIclkOff == TRUE) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) return; +#endif if (pAd->CommonCfg.BBPCurrentBW == BW_40) { @@ -6364,95 +6613,6 @@ VOID AsicAdjustTxPower( RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpR1); BbpR1 &= 0xFC; -#ifdef SINGLE_SKU - // Handle regulatory max tx power constrain - do - { - UCHAR TxPwrInEEPROM = 0xFF, CountryTxPwr = 0xFF, criterion; - UCHAR AdjustMaxTxPwr[40]; - - if (pAd->CommonCfg.Channel > 14) // 5G band - TxPwrInEEPROM = ((pAd->CommonCfg.DefineMaxTxPwr & 0xFF00) >> 8); - else // 2.4G band - TxPwrInEEPROM = (pAd->CommonCfg.DefineMaxTxPwr & 0x00FF); - CountryTxPwr = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel); - - // error handling, range check - if ((TxPwrInEEPROM > 0x50) || (CountryTxPwr > 0x50)) - { - DBGPRINT(RT_DEBUG_ERROR,("AsicAdjustTxPower - Invalid max tx power (=0x%02x), CountryTxPwr=%d\n", TxPwrInEEPROM, CountryTxPwr)); - break; - } - - criterion = *((PUCHAR)TxPwr + 2) & 0xF; // FAE use OFDM 6M as criterion - - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (criterion=%d, TxPwrInEEPROM=%d, CountryTxPwr=%d)\n", criterion, TxPwrInEEPROM, CountryTxPwr)); - - // Adjust max tx power according to the relationship of tx power in E2PROM - for (i=0; i<5; i++) - { - // CCK will have 4dBm larger than OFDM - // Therefore, we should separate to parse the tx power field - if (i == 0) - { - for (j=0; j<8; j++) - { - Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); - - if (j < 4) - { - // CCK will have 4dBm larger than OFDM - AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion) + 4; - } - else - { - AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion); - } - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j])); - } - } - else - { - for (j=0; j<8; j++) - { - Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); - - AdjustMaxTxPwr[i*8+j] = TxPwrInEEPROM + (Value - criterion); - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j])); - } - } - } - - // Adjust tx power according to the relationship - for (i=0; i<5; i++) - { - if (TxPwr[i] != 0xffffffff) - { - for (j=0; j<8; j++) - { - Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); - - // The system tx power is larger than the regulatory, the power should be restrain - if (AdjustMaxTxPwr[i*8+j] > CountryTxPwr) - { - // decrease to zero and don't need to take care BBPR1 - if ((Value - (AdjustMaxTxPwr[i*8+j] - CountryTxPwr)) > 0) - Value -= (AdjustMaxTxPwr[i*8+j] - CountryTxPwr); - else - Value = 0; - - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d)\n", i, j, Value, AdjustMaxTxPwr[i*8+j])); - } - else - DBGPRINT_RAW(RT_DEBUG_TRACE,("AsicAdjustTxPower (i/j=%d/%d, Value=%d, %d, no change)\n", i, j, Value, AdjustMaxTxPwr[i*8+j])); - - TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4); - } - } - } - } while (FALSE); -#endif // SINGLE_SKU // - /* calculate delta power based on the percentage specified from UI */ // E2PROM setting is calibrated for maximum TX power (i.e. 100%) // We lower TX power here according to the percentage specified from UI @@ -6522,7 +6682,6 @@ VOID AsicAdjustTxPower( } -#ifdef CONFIG_STA_SUPPORT /* ========================================================================== Description: @@ -6568,12 +6727,22 @@ VOID AsicForceSleep( */ VOID AsicForceWakeup( IN PRTMP_ADAPTER pAd, +#ifdef RT2860 IN UCHAR Level) +#endif +#ifdef RT2870 + IN BOOLEAN bFromTx) +#endif { DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n")); +#ifdef RT2860 RT28XX_STA_FORCE_WAKEUP(pAd, Level); +#endif +#ifdef RT2870 + RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx); +#endif } -#endif // CONFIG_STA_SUPPORT // + /* ========================================================================== Description: @@ -6688,9 +6857,7 @@ VOID AsicDisableRDG( Data &= 0xFFFFFF00; if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE) -#ifdef DOT11_N_SUPPORT && (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE) -#endif // DOT11_N_SUPPORT // ) { // For CWC test, change txop from 0x30 to 0x20 in TxBurst mode @@ -6745,8 +6912,7 @@ VOID AsicEnableBssSync( DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableBssSync(INFRA mode)\n")); RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU csr.field.bTsfTicking = 1; @@ -6754,7 +6920,7 @@ VOID AsicEnableBssSync( csr.field.bBeaconGen = 0; // do NOT generate BEACON csr.field.bTBTTEnable = 1; } -#endif // CONFIG_STA_SUPPORT // + RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word); } @@ -6785,6 +6951,7 @@ VOID AsicEnableIbssSync( csr9.field.bTsfTicking = 0; RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word); +#ifdef RT2860 // move BEACON TXD and frame content to on-chip memory ptr = (PUCHAR)&pAd->BeaconTxWI; for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field @@ -6802,6 +6969,24 @@ VOID AsicEnableIbssSync( RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr); ptr +=4; } +#endif +#ifdef RT2870 + // move BEACON TXD and frame content to on-chip memory + ptr = (PUCHAR)&pAd->BeaconTxWI; + for (i=0; i<TXWI_SIZE; i+=2) // 16-byte TXWI field + { + RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + i, ptr, 2); + ptr += 2; + } + + // start right after the 16-byte TXWI field + ptr = pAd->BeaconBuf; + for (i=0; i< pAd->BeaconTxWI.MPDUtotalByteCount; i+=2) + { + RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, ptr, 2); + ptr +=2; + } +#endif // RT2870 // // start sending BEACON csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU @@ -6949,8 +7134,7 @@ VOID AsicSetEdcaParm( Ac2Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VI]; Ac2Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VI]; Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI]; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { // Tuning for Wi-Fi WMM S06 if (pAd->CommonCfg.bWiFiTest && @@ -6958,15 +7142,22 @@ VOID AsicSetEdcaParm( Ac2Cfg.field.Aifsn -= 1; // Tuning for TGn Wi-Fi 5.2.32 - // STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta + // STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta if (STA_TGN_WIFI_ON(pAd) && pEdcaParm->Aifsn[QID_AC_VI] == 10) { Ac0Cfg.field.Aifsn = 3; Ac2Cfg.field.AcTxop = 5; } + +#ifdef RT30xx + if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020) + { + // Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta. + Ac2Cfg.field.Aifsn = 5; + } +#endif // RT30xx // } -#endif // CONFIG_STA_SUPPORT // Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO]; Ac3Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VO]; @@ -7008,10 +7199,9 @@ VOID AsicSetEdcaParm( CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE]; CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK]; CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI]; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test -#endif // CONFIG_STA_SUPPORT // + + CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test + RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word); CwmaxCsr.word = 0; @@ -7025,8 +7215,7 @@ VOID AsicSetEdcaParm( AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BE]; AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK]; AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI]; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { // Tuning for Wi-Fi WMM S06 if (pAd->CommonCfg.bWiFiTest && @@ -7034,20 +7223,25 @@ VOID AsicSetEdcaParm( AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn - 4; // Tuning for TGn Wi-Fi 5.2.32 - // STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta + // STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta if (STA_TGN_WIFI_ON(pAd) && pEdcaParm->Aifsn[QID_AC_VI] == 10) { AifsnCsr.field.Aifsn0 = 3; AifsnCsr.field.Aifsn2 = 7; } +#ifdef RT2870 + if (INFRA_ON(pAd)) + CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_WMM_CAPABLE); +#endif } -#endif // CONFIG_STA_SUPPORT // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test -#endif // CONFIG_STA_SUPPORT // + AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test +#ifdef RT30xx + if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020) + AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04. +#endif // RT30xx // + RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word); NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM)); @@ -7098,10 +7292,8 @@ VOID AsicSetSlotTime( ULONG SlotTime; UINT32 RegValue = 0; -#ifdef CONFIG_STA_SUPPORT if (pAd->CommonCfg.Channel > 14) bUseShortSlotTime = TRUE; -#endif // CONFIG_STA_SUPPORT // if (bUseShortSlotTime) OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED); @@ -7110,36 +7302,31 @@ VOID AsicSetSlotTime( SlotTime = (bUseShortSlotTime)? 9 : 20; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { +#ifndef RT30xx // force using short SLOT time for FAE to demo performance when TxBurst is ON if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))) -#ifdef DOT11_N_SUPPORT || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)) -#endif // DOT11_N_SUPPORT // ) { // In this case, we will think it is doing Wi-Fi test // And we will not set to short slot when bEnableTxBurst is TRUE. } else if (pAd->CommonCfg.bEnableTxBurst) +#endif +#ifdef RT30xx + if (pAd->CommonCfg.bEnableTxBurst) +#endif SlotTime = 9; } -#endif // CONFIG_STA_SUPPORT // // // For some reasons, always set it to short slot time. // // ToDo: Should consider capability with 11B // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (pAd->StaCfg.BssType == BSS_ADHOC) - SlotTime = 20; - } -#endif // CONFIG_STA_SUPPORT // + if (pAd->StaCfg.BssType == BSS_ADHOC) + SlotTime = 20; RTMP_IO_READ32(pAd, BKOFF_SLOT_CFG, &RegValue); RegValue = RegValue & 0xFFFFFF00; @@ -7170,7 +7357,9 @@ VOID AsicAddSharedKeyEntry( { ULONG offset; //, csr0; SHAREDKEY_MODE_STRUC csr1; +#ifdef RT2860 INT i; +#endif DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx)); //============================================================================================ @@ -7192,28 +7381,43 @@ VOID AsicAddSharedKeyEntry( // // fill key material - key + TX MIC + RX MIC // + offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE; +#ifdef RT2860 for (i=0; i<MAX_LEN_OF_SHARE_KEY; i++) { RTMP_IO_WRITE8(pAd, offset + i, pKey[i]); } - +#endif +#ifdef RT2870 + RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_SHARE_KEY); +#endif offset += MAX_LEN_OF_SHARE_KEY; if (pTxMic) { +#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]); } +#endif +#ifdef RT2870 + RTUSBMultiWrite(pAd, offset, pTxMic, 8); +#endif } offset += 8; if (pRxMic) { +#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]); } +#endif +#ifdef RT2870 + RTUSBMultiWrite(pAd, offset, pRxMic, 8); +#endif } @@ -7389,7 +7593,9 @@ VOID AsicAddKeyEntry( PUCHAR pTxtsc = pCipherKey->TxTsc; UCHAR CipherAlg = pCipherKey->CipherAlg; SHAREDKEY_MODE_STRUC csr1; +#ifdef RT2860 UCHAR i; +#endif DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n")); // @@ -7404,10 +7610,15 @@ VOID AsicAddKeyEntry( // 2.) Set Key to Asic // //for (i = 0; i < KeyLen; i++) +#ifdef RT2860 for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++) { RTMP_IO_WRITE8(pAd, offset + i, pKey[i]); } +#endif +#ifdef RT2870 + RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_PEER_KEY); +#endif offset += MAX_LEN_OF_PEER_KEY; // @@ -7415,19 +7626,29 @@ VOID AsicAddKeyEntry( // if (pTxMic) { +#ifdef RT2860 for (i = 0; i < 8; i++) { RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]); } +#endif +#ifdef RT2870 + RTUSBMultiWrite(pAd, offset, pTxMic, 8); +#endif } offset += LEN_TKIP_TXMICK; if (pRxMic) { +#ifdef RT2860 for (i = 0; i < 8; i++) { RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]); } +#endif +#ifdef RT2870 + RTUSBMultiWrite(pAd, offset, pRxMic, 8); +#endif } @@ -7437,6 +7658,7 @@ VOID AsicAddKeyEntry( // if (bTxKey) { +#ifdef RT2860 offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE); // // Write IV @@ -7460,6 +7682,26 @@ VOID AsicAddKeyEntry( RTMP_IO_WRITE8(pAd, offset + i, pTxtsc[i + 2]); } +#endif +#ifdef RT2870 + UINT32 tmpVal; + + // + // Write IV + // + IV4 = (KeyIdx << 6); + if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) ||(CipherAlg == CIPHER_AES)) + IV4 |= 0x20; // turn on extension bit means EIV existence + + tmpVal = pTxtsc[1] + (((pTxtsc[1] | 0x20) & 0x7f) << 8) + (pTxtsc[0] << 16) + (IV4 << 24); + RTMP_IO_WRITE32(pAd, offset, tmpVal); + + // + // Write EIV + // + offset += 4; + RTMP_IO_WRITE32(pAd, offset, *(PUINT32)&pCipherKey->TxTsc[2]); +#endif // RT2870 // AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable); } @@ -7524,10 +7766,15 @@ VOID AsicAddPairwiseKeyEntry( // EKEY offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE); +#ifdef RT2860 for (i=0; i<MAX_LEN_OF_PEER_KEY; i++) { RTMP_IO_WRITE8(pAd, offset + i, pKey[i]); } +#endif +#ifdef RT2870 + RTUSBMultiWrite(pAd, offset, &pCipherKey->Key[0], MAX_LEN_OF_PEER_KEY); +#endif // RT2870 // for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4) { UINT32 Value; @@ -7539,18 +7786,28 @@ VOID AsicAddPairwiseKeyEntry( // MIC KEY if (pTxMic) { +#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset+i, pTxMic[i]); } +#endif +#ifdef RT2870 + RTUSBMultiWrite(pAd, offset, &pCipherKey->TxMic[0], 8); +#endif // RT2870 // } offset += 8; if (pRxMic) { +#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset+i, pRxMic[i]); } +#endif +#ifdef RT2870 + RTUSBMultiWrite(pAd, offset, &pCipherKey->RxMic[0], 8); +#endif // RT2870 // } DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg])); @@ -7599,9 +7856,7 @@ BOOLEAN AsicSendCommandToMcu( HOST_CMD_CSR_STRUC H2MCmd; H2M_MAILBOX_STRUC H2MMailbox; ULONG i = 0; -#ifdef RALINK_ATE - static UINT32 j = 0; -#endif // RALINK_ATE // + do { RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word); @@ -7611,33 +7866,10 @@ BOOLEAN AsicSendCommandToMcu( RTMPusecDelay(2); } while(i++ < 100); - if (i >= 100) + if (i > 100) { -#ifdef RALINK_ATE - if (pAd->ate.bFWLoading == TRUE) - { - /* reloading firmware when received iwpriv cmd "ATE=ATESTOP" */ - if (j > 0) - { - if (j % 64 != 0) - { - DBGPRINT(RT_DEBUG_ERROR, ("#")); - } - else - { - DBGPRINT(RT_DEBUG_ERROR, ("\n")); - } - ++j; - } - else if (j == 0) - { - DBGPRINT(RT_DEBUG_ERROR, ("Loading firmware. Please wait for a moment...\n")); - ++j; - } - } - else -#endif // RALINK_ATE // { +#ifdef RT2860 UINT32 Data; // Reset DMA @@ -7659,21 +7891,15 @@ BOOLEAN AsicSendCommandToMcu( RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); Data &= 0xfffffffd; RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); +#endif /* RT2860 */ DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n")); } //return FALSE; +#ifdef RT2870 + return FALSE; +#endif } -#ifdef RALINK_ATE - else if (pAd->ate.bFWLoading == TRUE) - { - /* reloading of firmware is completed */ - pAd->ate.bFWLoading = FALSE; - DBGPRINT(RT_DEBUG_ERROR, ("\n")); - j = 0; - } -#endif // RALINK_ATE // - H2MMailbox.field.Owner = 1; // pass ownership to MCU H2MMailbox.field.CmdToken = Token; H2MMailbox.field.HighByte = Arg1; @@ -7691,6 +7917,7 @@ BOOLEAN AsicSendCommandToMcu( return TRUE; } +#ifdef RT2860 BOOLEAN AsicCheckCommanOk( IN PRTMP_ADAPTER pAd, IN UCHAR Command) @@ -7755,6 +7982,7 @@ BOOLEAN AsicCheckCommanOk( return FALSE; } +#endif /* RT8260 */ /* ======================================================================== @@ -7797,8 +8025,6 @@ VOID RTMPCheckRates( NdisMoveMemory(SupRate, NewRate, NewRateLen); } -#ifdef CONFIG_STA_SUPPORT -#ifdef DOT11_N_SUPPORT BOOLEAN RTMPCheckChannel( IN PRTMP_ADAPTER pAd, IN UCHAR CentralChannel, @@ -7944,8 +8170,6 @@ BOOLEAN RTMPCheckHt( COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability); return TRUE; } -#endif // DOT11_N_SUPPORT // -#endif // CONFIG_STA_SUPPORT // /* ======================================================================== @@ -7978,10 +8202,8 @@ VOID RTMPUpdateMlmeRate( MinimumRate = RATE_1; break; case PHY_11BG_MIXED: -#ifdef DOT11_N_SUPPORT case PHY_11ABGN_MIXED: case PHY_11BGN_MIXED: -#endif // DOT11_N_SUPPORT // if ((pAd->MlmeAux.SupRateLen == 4) && (pAd->MlmeAux.ExtRateLen == 0)) // B only AP @@ -7995,13 +8217,11 @@ VOID RTMPUpdateMlmeRate( MinimumRate = RATE_6; break; case PHY_11A: -#ifdef DOT11_N_SUPPORT case PHY_11N_2_4G: // rt2860 need to check mlmerate for 802.11n case PHY_11GN_MIXED: case PHY_11AGN_MIXED: case PHY_11AN_MIXED: case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // ProperMlmeRate = RATE_24; MinimumRate = RATE_6; break; @@ -8111,6 +8331,58 @@ CHAR RTMPMaxRssi( return larger; } +#ifdef RT30xx +// Antenna divesity use GPIO3 and EESK pin for control +// Antenna and EEPROM access are both using EESK pin, +// Therefor we should avoid accessing EESK at the same time +// Then restore antenna after EEPROM access +VOID AsicSetRxAnt( + IN PRTMP_ADAPTER pAd, + IN UCHAR Ant) +{ +#ifdef RT30xx + UINT32 Value; + UINT32 x; + + if ((pAd->EepromAccess) || + (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) || + (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) || + (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) || + (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) + { + return; + } + + // the antenna selection is through firmware and MAC register(GPIO3) + if (Ant == 0) + { + // Main antenna + RTMP_IO_READ32(pAd, E2PROM_CSR, &x); + x |= (EESK); + RTMP_IO_WRITE32(pAd, E2PROM_CSR, x); + + RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value); + Value &= ~(0x0808); + RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value); + DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n")); + } + else + { + // Aux antenna + RTMP_IO_READ32(pAd, E2PROM_CSR, &x); + x &= ~(EESK); + RTMP_IO_WRITE32(pAd, E2PROM_CSR, x); + + RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value); + Value &= ~(0x0808); + Value |= 0x08; + RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value); + DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n")); + } +#endif // RT30xx // +} +#endif /* RT30xx */ + /* ======================================================================== Routine Description: @@ -8129,14 +8401,7 @@ VOID AsicEvaluateRxAnt( { UCHAR BBPR3 = 0; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) +#ifndef RT30xx { if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS | @@ -8148,7 +8413,6 @@ VOID AsicEvaluateRxAnt( if (pAd->StaCfg.Psm == PWR_SAVE) return; } -#endif // CONFIG_STA_SUPPORT // RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3); BBPR3 &= (~0x18); @@ -8165,10 +8429,11 @@ VOID AsicEvaluateRxAnt( BBPR3 |= (0x0); } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + +#ifdef RT2860 pAd->StaCfg.BBPR3 = BBPR3; -#endif // CONFIG_STA_SUPPORT // +#endif +#ifdef RT2870 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) ) { @@ -8187,6 +8452,90 @@ VOID AsicEvaluateRxAnt( pAd->Mlme.bLowThroughput = TRUE; } } +#endif +#endif /* RT30xx */ +#ifdef RT30xx + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS | + fRTMP_ADAPTER_HALT_IN_PROGRESS | + fRTMP_ADAPTER_RADIO_OFF | + fRTMP_ADAPTER_NIC_NOT_EXIST | + fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) || + OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) +#ifdef RT30xx + || (pAd->EepromAccess) +#endif // RT30xx // + ) + return; + + + { + //if (pAd->StaCfg.Psm == PWR_SAVE) + // return; + } + + // two antenna selection mechanism- one is antenna diversity, the other is failed antenna remove + // one is antenna diversity:there is only one antenna can rx and tx + // the other is failed antenna remove:two physical antenna can rx and tx + if (pAd->NicConfig2.field.AntDiversity) + { + DBGPRINT(RT_DEBUG_TRACE,("AntDiv - before evaluate Pair1-Ant (%d,%d)\n", + pAd->RxAnt.Pair1PrimaryRxAnt, pAd->RxAnt.Pair1SecondaryRxAnt)); + + AsicSetRxAnt(pAd, pAd->RxAnt.Pair1SecondaryRxAnt); + + pAd->RxAnt.EvaluatePeriod = 1; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt + pAd->RxAnt.FirstPktArrivedWhenEvaluate = FALSE; + pAd->RxAnt.RcvPktNumWhenEvaluate = 0; + + // a one-shot timer to end the evalution + // dynamic adjust antenna evaluation period according to the traffic + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) + RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 100); + else + RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300); + } + else + { + if (pAd->StaCfg.Psm == PWR_SAVE) + return; + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3); + BBPR3 &= (~0x18); + if(pAd->Antenna.field.RxPath == 3) + { + BBPR3 |= (0x10); + } + else if(pAd->Antenna.field.RxPath == 2) + { + BBPR3 |= (0x8); + } + else if(pAd->Antenna.field.RxPath == 1) + { + BBPR3 |= (0x0); + } + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); + } +#endif /* RT30xx */ + + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) + ) + { + ULONG TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + + pAd->RalinkCounters.OneSecTxRetryOkCount + + pAd->RalinkCounters.OneSecTxFailCount; + + // dynamic adjust antenna evaluation period according to the traffic + if (TxTotalCnt > 50) + { + RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20); + pAd->Mlme.bLowThroughput = FALSE; + } + else + { + RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300); + pAd->Mlme.bLowThroughput = TRUE; + } + } } /* @@ -8209,19 +8558,10 @@ VOID AsicRxAntEvalTimeout( IN PVOID SystemSpecific3) { RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext; -#ifdef CONFIG_STA_SUPPORT UCHAR BBPR3 = 0; CHAR larger = -127, rssi0, rssi1, rssi2; -#endif // CONFIG_STA_SUPPORT // -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) +#ifndef RT30xx { if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) || @@ -8279,11 +8619,111 @@ VOID AsicRxAntEvalTimeout( BBPR3 |= (0x0); } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); +#ifdef RT2860 pAd->StaCfg.BBPR3 = BBPR3; +#endif } +#endif /* RT30xx */ +#ifdef RT30xx + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS | + fRTMP_ADAPTER_HALT_IN_PROGRESS | + fRTMP_ADAPTER_RADIO_OFF | + fRTMP_ADAPTER_NIC_NOT_EXIST) || + OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) +#ifdef RT30xx + || (pAd->EepromAccess) +#endif // RT30xx // + ) + return; -#endif // CONFIG_STA_SUPPORT // + { + //if (pAd->StaCfg.Psm == PWR_SAVE) + // return; + if (pAd->NicConfig2.field.AntDiversity) + { + if ((pAd->RxAnt.RcvPktNumWhenEvaluate != 0) && (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >= pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt])) + { + UCHAR temp; + + // + // select PrimaryRxAntPair + // Role change, Used Pair1SecondaryRxAnt as PrimaryRxAntPair. + // Since Pair1SecondaryRxAnt Quality good than Pair1PrimaryRxAnt + // + temp = pAd->RxAnt.Pair1PrimaryRxAnt; + pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt; + pAd->RxAnt.Pair1SecondaryRxAnt = temp; + + pAd->RxAnt.Pair1LastAvgRssi = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >> 3); + pAd->RxAnt.EvaluateStableCnt = 0; + } + else + { + // if the evaluated antenna is not better than original, switch back to original antenna + AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); + pAd->RxAnt.EvaluateStableCnt ++; + } + + pAd->RxAnt.EvaluatePeriod = 0; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt + + DBGPRINT(RT_DEBUG_TRACE,("AsicRxAntEvalAction::After Eval(fix in #%d), <%d, %d>, RcvPktNumWhenEvaluate=%ld\n", + pAd->RxAnt.Pair1PrimaryRxAnt, (pAd->RxAnt.Pair1AvgRssi[0] >> 3), (pAd->RxAnt.Pair1AvgRssi[1] >> 3), pAd->RxAnt.RcvPktNumWhenEvaluate)); + } + else + { + if (pAd->StaCfg.Psm == PWR_SAVE) + return; + + // if the traffic is low, use average rssi as the criteria + if (pAd->Mlme.bLowThroughput == TRUE) + { + rssi0 = pAd->StaCfg.RssiSample.LastRssi0; + rssi1 = pAd->StaCfg.RssiSample.LastRssi1; + rssi2 = pAd->StaCfg.RssiSample.LastRssi2; + } + else + { + rssi0 = pAd->StaCfg.RssiSample.AvgRssi0; + rssi1 = pAd->StaCfg.RssiSample.AvgRssi1; + rssi2 = pAd->StaCfg.RssiSample.AvgRssi2; + } + + if(pAd->Antenna.field.RxPath == 3) + { + larger = max(rssi0, rssi1); + + if (larger > (rssi2 + 20)) + pAd->Mlme.RealRxPath = 2; + else + pAd->Mlme.RealRxPath = 3; + } + else if(pAd->Antenna.field.RxPath == 2) + { + if (rssi0 > (rssi1 + 20)) + pAd->Mlme.RealRxPath = 1; + else + pAd->Mlme.RealRxPath = 2; + } + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3); + BBPR3 &= (~0x18); + if(pAd->Mlme.RealRxPath == 3) + { + BBPR3 |= (0x10); + } + else if(pAd->Mlme.RealRxPath == 2) + { + BBPR3 |= (0x8); + } + else if(pAd->Mlme.RealRxPath == 1) + { + BBPR3 |= (0x0); + } + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); + } + } +#endif /* RT30xx */ } @@ -8350,9 +8790,6 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch( { BOOLEAN result = TRUE; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // only associated STA counts if (pEntry && (pEntry->ValidAsCLI) && (pEntry->Sst == SST_ASSOC)) @@ -8361,15 +8798,7 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch( } else result = FALSE; - -#ifdef QOS_DLS_SUPPORT - if (pEntry && (pEntry->ValidAsDls)) - result = pAd->StaCfg.bAutoTxRateSwitch; -#endif // QOS_DLS_SUPPORT // } -#endif // CONFIG_STA_SUPPORT // - - return result; } @@ -8378,14 +8807,9 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch( BOOLEAN RTMPAutoRateSwitchCheck( IN PRTMP_ADAPTER pAd) { + if (pAd->StaCfg.bAutoTxRateSwitch) + return TRUE; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (pAd->StaCfg.bAutoTxRateSwitch) - return TRUE; - } -#endif // CONFIG_STA_SUPPORT // return FALSE; } @@ -8411,13 +8835,7 @@ UCHAR RTMPStaFixedTxMode( { UCHAR tx_mode = FIXED_TXMODE_HT; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode; - } -#endif // CONFIG_STA_SUPPORT // + tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode; return tx_mode; } @@ -8474,7 +8892,6 @@ VOID RTMPUpdateLegacyTxSetting( } } -#ifdef CONFIG_STA_SUPPORT /* ========================================================================== Description: @@ -8505,7 +8922,12 @@ VOID AsicStaBbpTuning( && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) ) && !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) +#ifdef RT2860 && (pAd->bPCIclkOff == FALSE)) +#endif +#ifdef RT2870 + ) +#endif { RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value); R66 = OrigR66Value; @@ -8517,6 +8939,45 @@ VOID AsicStaBbpTuning( if (pAd->LatchRfRegs.Channel <= 14) { //BG band +#ifdef RT2870 + // RT3070 is a no LNA solution, it should have different control regarding to AGC gain control + // Otherwise, it will have some throughput side effect when low RSSI +#ifndef RT30xx + if (IS_RT3070(pAd)) +#endif +#ifdef RT30xx + if (IS_RT30xx(pAd)) +#endif + { + if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) + { + R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20; + if (OrigR66Value != R66) + { +#ifndef RT30xx + RTUSBWriteBBPRegister(pAd, BBP_R66, R66); +#endif +#ifdef RT30xx + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); +#endif + } + } + else + { + R66 = 0x1C + 2*GET_LNA_GAIN(pAd); + if (OrigR66Value != R66) + { +#ifndef RT30xx + RTUSBWriteBBPRegister(pAd, BBP_R66, R66); +#endif +#ifdef RT30xx + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); +#endif + } + } + } + else +#endif // RT2870 // { if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) { @@ -8582,6 +9043,7 @@ VOID AsicStaBbpTuning( } } +#ifdef RT2860 VOID AsicResetFromDMABusy( IN PRTMP_ADAPTER pAd) { @@ -8681,7 +9143,7 @@ VOID AsicResetPBF( DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset PBF !!!! \n")); } } -#endif // CONFIG_STA_SUPPORT // +#endif /* RT2860 */ VOID RTMPSetAGCInitValue( IN PRTMP_ADAPTER pAd, @@ -8701,13 +9163,11 @@ VOID RTMPSetAGCInitValue( R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); } -#ifdef DOT11_N_SUPPORT else { R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); } -#endif // DOT11_N_SUPPORT // } } @@ -8722,6 +9182,15 @@ VOID AsicTurnOffRFClk( UCHAR index; RTMP_RF_REGS *RFRegTable; +#ifdef RT30xx + // The RF programming sequence is difference between 3xxx and 2xxx + if (IS_RT3090(pAd)) + { + RT30xxLoadRFSleepModeSetup(pAd); // add by johnli, RF power sequence setup, load RF sleep-mode setup + } + else + { +#endif // RT30xx // RFRegTable = RF2850RegTable; switch (pAd->RfIcType) @@ -8763,6 +9232,10 @@ VOID AsicTurnOffRFClk( default: break; } +#ifdef RT30xx + } +#endif // RT30xx // + } @@ -8776,6 +9249,14 @@ VOID AsicTurnOnRFClk( UCHAR index; RTMP_RF_REGS *RFRegTable; +#ifdef RT30xx + // The RF programming sequence is difference between 3xxx and 2xxx + if (IS_RT3090(pAd)) + { + } + else + { +#endif // RT30xx // RFRegTable = RF2850RegTable; switch (pAd->RfIcType) @@ -8822,9 +9303,14 @@ VOID AsicTurnOnRFClk( break; } +#ifndef RT30xx DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOnRFClk#%d(RF=%d, ) , R2=0x%08x\n", Channel, pAd->RfIcType, R2)); +#endif +#ifdef RT30xx + } +#endif // RT30xx // } diff --git a/drivers/staging/rt2860/common/netif_block.c b/drivers/staging/rt2860/common/netif_block.c deleted file mode 100644 index d3f7d087e7f0..000000000000 --- a/drivers/staging/rt2860/common/netif_block.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* - */ - -#include "../rt_config.h" -#include "netif_block.h" - -static NETIF_ENTRY freeNetIfEntryPool[FREE_NETIF_POOL_SIZE]; -static LIST_HEADER freeNetIfEntryList; - -void initblockQueueTab( - IN PRTMP_ADAPTER pAd) -{ - int i; - - initList(&freeNetIfEntryList); - for (i = 0; i < FREE_NETIF_POOL_SIZE; i++) - insertTailList(&freeNetIfEntryList, (PLIST_ENTRY)&freeNetIfEntryPool[i]); - - for (i=0; i < NUM_OF_TX_RING; i++) - initList(&pAd->blockQueueTab[i].NetIfList); - - return; -} - -BOOLEAN blockNetIf( - IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry, - IN PNET_DEV pNetDev) -{ - PNETIF_ENTRY pNetIfEntry = NULL; - - if ((pNetIfEntry = (PNETIF_ENTRY)removeHeadList(&freeNetIfEntryList)) != NULL) - { - netif_stop_queue(pNetDev); - pNetIfEntry->pNetDev = pNetDev; - insertTailList(&pBlockQueueEntry->NetIfList, (PLIST_ENTRY)pNetIfEntry); - - pBlockQueueEntry->SwTxQueueBlockFlag = TRUE; - DBGPRINT(RT_DEBUG_TRACE, ("netif_stop_queue(%s)\n", pNetDev->name)); - } - else - return FALSE; - - return TRUE; -} - -VOID releaseNetIf( - IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry) -{ - PNETIF_ENTRY pNetIfEntry = NULL; - PLIST_HEADER pNetIfList = &pBlockQueueEntry->NetIfList; - - while((pNetIfEntry = (PNETIF_ENTRY)removeHeadList(pNetIfList)) != NULL) - { - PNET_DEV pNetDev = pNetIfEntry->pNetDev; - netif_wake_queue(pNetDev); - insertTailList(&freeNetIfEntryList, (PLIST_ENTRY)pNetIfEntry); - - DBGPRINT(RT_DEBUG_TRACE, ("netif_wake_queue(%s)\n", pNetDev->name)); - } - pBlockQueueEntry->SwTxQueueBlockFlag = FALSE; - return; -} - - -VOID StopNetIfQueue( - IN PRTMP_ADAPTER pAd, - IN UCHAR QueIdx, - IN PNDIS_PACKET pPacket) -{ - PNET_DEV NetDev = NULL; - UCHAR IfIdx = 0; - BOOLEAN valid = FALSE; - -#ifdef APCLI_SUPPORT - if (RTMP_GET_PACKET_NET_DEVICE(pPacket) >= MIN_NET_DEVICE_FOR_APCLI) - { - IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_APCLI) % MAX_APCLI_NUM; - NetDev = pAd->ApCfg.ApCliTab[IfIdx].dev; - } - else -#endif // APCLI_SUPPORT // -#ifdef WDS_SUPPORT - if (RTMP_GET_PACKET_NET_DEVICE(pPacket) >= MIN_NET_DEVICE_FOR_WDS) - { - IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_WDS) % MAX_WDS_ENTRY; - NetDev = pAd->WdsTab.WdsEntry[IfIdx].dev; - } - else -#endif // WDS_SUPPORT // - { -#ifdef MBSS_SUPPORT - if (pAd->OpMode == OPMODE_AP) - { - IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_MBSSID) % MAX_MBSSID_NUM; - NetDev = pAd->ApCfg.MBSSID[IfIdx].MSSIDDev; - } - else - { - IfIdx = MAIN_MBSSID; - NetDev = pAd->net_dev; - } -#else - IfIdx = MAIN_MBSSID; - NetDev = pAd->net_dev; -#endif - } - - // WMM support 4 software queues. - // One software queue full doesn't mean device have no capbility to transmit packet. - // So disable block Net-If queue function while WMM enable. -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - valid = (pAd->CommonCfg.bWmmCapable == TRUE) ? FALSE : TRUE; -#endif // CONFIG_STA_SUPPORT // - - if (valid) - blockNetIf(&pAd->blockQueueTab[QueIdx], NetDev); - return; -} - diff --git a/drivers/staging/rt2860/common/netif_block.h b/drivers/staging/rt2860/common/netif_block.h deleted file mode 100644 index 6e5151c41095..000000000000 --- a/drivers/staging/rt2860/common/netif_block.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* - */ - -#ifndef __NET_IF_BLOCK_H__ -#define __NET_IF_BLOCK_H__ - -//#include <linux/device.h> -#include "link_list.h" -#include "rtmp.h" - -#define FREE_NETIF_POOL_SIZE 32 - -typedef struct _NETIF_ENTRY -{ - struct _NETIF_ENTRY *pNext; - PNET_DEV pNetDev; -} NETIF_ENTRY, *PNETIF_ENTRY; - -void initblockQueueTab( - IN PRTMP_ADAPTER pAd); - -BOOLEAN blockNetIf( - IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry, - IN PNET_DEV pNetDev); - -VOID releaseNetIf( - IN PBLOCK_QUEUE_ENTRY pBlockQueueEntry); - -VOID StopNetIfQueue( - IN PRTMP_ADAPTER pAd, - IN UCHAR QueIdx, - IN PNDIS_PACKET pPacket); -#endif // __NET_IF_BLOCK_H__ - diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index 8a00cee3ee91..004f53023b0f 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -38,8 +38,18 @@ Jan Lee 2006-09-15 RT2860. Change for 802.11n , EEPROM, Led, BA, HT. */ #include "../rt_config.h" -#include "firmware.h" +#ifndef RT30xx +#ifdef RT2860 +#include "firmware.h" #include <linux/bitrev.h> +#endif +#ifdef RT2870 +#include "../../rt2870/common/firmware.h" +#endif +#endif +#ifdef RT30xx +#include "../../rt3070/firmware.h" +#endif UCHAR BIT8[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80}; ULONG BIT32[] = {0x00000001, 0x00000002, 0x00000004, 0x00000008, @@ -90,6 +100,22 @@ const unsigned short ccitt_16Table[] = { #define ByteCRC16(v, crc) \ (unsigned short)((crc << 8) ^ ccitt_16Table[((crc >> 8) ^ (v)) & 255]) +#ifdef RT2870 +unsigned char BitReverse(unsigned char x) +{ + int i; + unsigned char Temp=0; + for(i=0; ; i++) + { + if(x & 0x80) Temp |= 0x80; + if(i==7) break; + x <<= 1; + Temp >>= 1; + } + return Temp; +} +#endif + // // BBP register initialization set // @@ -114,6 +140,38 @@ REG_PAIR BBPRegTable[] = { // // RF register initialization set // +#ifdef RT2870 +REG_PAIR RT30xx_RFRegTable[] = { + {RF_R04, 0x40}, + {RF_R05, 0x03}, + {RF_R06, 0x02}, + {RF_R07, 0x70}, + {RF_R09, 0x0F}, +#ifndef RT30xx + {RF_R10, 0x71}, +#endif +#ifdef RT30xx + {RF_R10, 0x41}, +#endif + {RF_R11, 0x21}, + {RF_R12, 0x7B}, + {RF_R14, 0x90}, + {RF_R15, 0x58}, + {RF_R16, 0xB3}, + {RF_R17, 0x92}, + {RF_R18, 0x2C}, + {RF_R19, 0x02}, + {RF_R20, 0xBA}, + {RF_R21, 0xDB}, + {RF_R24, 0x16}, + {RF_R25, 0x01}, +#ifndef RT30xx + {RF_R27, 0x03}, +#endif + {RF_R29, 0x1F}, +}; +#define NUM_RF_REG_PARMS (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR)) +#endif // RT2870 // // // ASIC register initialization sets @@ -146,10 +204,18 @@ RTMP_REG_PAIR MACRegTable[] = { {AUTO_RSP_CFG, 0x00000013}, // Initial Auto_Responder, because QA will turn off Auto-Responder {CCK_PROT_CFG, 0x05740003 /*0x01740003*/}, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. {OFDM_PROT_CFG, 0x05740003 /*0x01740003*/}, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. +//PS packets use Tx1Q (for HCCA) when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA) +#ifdef RT2870 + {PBF_CFG, 0xf40006}, // Only enable Queue 2 + {MM40_PROT_CFG, 0x3F44084}, // Initial Auto_Responder, because QA will turn off Auto-Responder + {WPDMA_GLO_CFG, 0x00000030}, +#endif // RT2870 // {GF20_PROT_CFG, 0x01744004}, // set 19:18 --> Short NAV for MIMO PS {GF40_PROT_CFG, 0x03F44084}, {MM20_PROT_CFG, 0x01744004}, +#ifdef RT2860 {MM40_PROT_CFG, 0x03F54084}, +#endif {TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f*/ /*0x000024bf*/}, //Extension channel backoff. {TX_RTS_CFG, 0x00092b20}, {EXP_ACK_TIME, 0x002400ca}, // default value @@ -163,20 +229,22 @@ RTMP_REG_PAIR MACRegTable[] = { {PWR_PIN_CFG, 0x00000003}, // patch for 2880-E }; - -#ifdef CONFIG_STA_SUPPORT RTMP_REG_PAIR STAMACRegTable[] = { {WMM_AIFSN_CFG, 0x00002273}, {WMM_CWMIN_CFG, 0x00002344}, {WMM_CWMAX_CFG, 0x000034aa}, }; -#endif // CONFIG_STA_SUPPORT // #define NUM_MAC_REG_PARMS (sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR)) -#ifdef CONFIG_STA_SUPPORT #define NUM_STA_MAC_REG_PARMS (sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR)) -#endif // CONFIG_STA_SUPPORT // +#ifdef RT2870 +// +// RT2870 Firmware Spec only used 1 oct for version expression +// +#define FIRMWARE_MINOR_VERSION 7 + +#endif // RT2870 // // New 8k byte firmware size for RT3071/RT3072 #define FIRMWAREIMAGE_MAX_LENGTH 0x2000 @@ -186,7 +254,9 @@ RTMP_REG_PAIR STAMACRegTable[] = { #define FIRMWAREIMAGEV1_LENGTH 0x1000 #define FIRMWAREIMAGEV2_LENGTH 0x1000 +#ifdef RT2860 #define FIRMWARE_MINOR_VERSION 2 +#endif /* @@ -244,7 +314,9 @@ NDIS_STATUS RTMPAllocAdapterBlock( // Init spin locks NdisAllocateSpinLock(&pAd->MgmtRingLock); +#ifdef RT2860 NdisAllocateSpinLock(&pAd->RxRingLock); +#endif for (index =0 ; index < NUM_OF_TX_RING; index++) { @@ -974,67 +1046,6 @@ VOID RTMPReadChannelPwr( // 4. Print and Debug choffset = 14 + 12 + 16 + 7; - - -#if 0 - // Init the 802.11j channel number for TX channel power - // 0. 20MHz - for (i = 0; i < 3; i++) - { - pAd->TxPower11J[i].Channel = 8 + i * 4; - pAd->TxPower11J[i].BW = BW_20; - } - - for (i = 0; i < 4; i++) - { - pAd->TxPower11J[i + 3].Channel = 34 + i * 4; - pAd->TxPower11J[i + 3].BW = BW_20; - } - - for (i = 0; i < 4; i++) - { - pAd->TxPower11J[i + 7].Channel = 184 + i * 4; - pAd->TxPower11J[i + 7].BW = BW_20; - } - - // 0. 10MHz - for (i = 0; i < 2; i++) - { - pAd->TxPower11J[i + 11].Channel = 7 + i; - pAd->TxPower11J[i + 11].BW = BW_10; - } - pAd->TxPower11J[13].Channel = 11; - pAd->TxPower11J[13].BW = BW_10; - - for (i = 0; i < 3; i++) - { - pAd->TxPower11J[i + 14].Channel = 183 + i; - pAd->TxPower11J[i + 14].BW= BW_10; - } - - for (i = 0; i < 3; i++) - { - pAd->TxPower11J[i + 17].Channel = 187 + i; - pAd->TxPower11J[i + 17].BW = BW_10; - } - for (i = 0; i < 10; i++) - { - Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_Japan_TX_PWR_OFFSET + i * 2); - Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_Japan_TX2_PWR_OFFSET + i * 2); - - if ((Power.field.Byte0 < 36) && (Power.field.Byte0 > -6)) - pAd->TxPower11J[i * 2].Power = Power.field.Byte0; - - if ((Power.field.Byte1 < 36) && (Power.field.Byte1 > -6)) - pAd->TxPower11J[i * 2 + 1].Power = Power.field.Byte1; - - if ((Power2.field.Byte0 < 36) && (Power2.field.Byte0 > -6)) - pAd->TxPower11J[i * 2].Power2 = Power2.field.Byte0; - - if ((Power2.field.Byte1 < 36) && (Power2.field.Byte1 > -6)) - pAd->TxPower11J[i * 2 + 1].Power2 = Power2.field.Byte1; - } -#endif } /* @@ -1071,6 +1082,425 @@ NDIS_STATUS NICReadRegParameters( } +#ifdef RT2870 +/* + ======================================================================== + + Routine Description: + For RF filter calibration purpose + + Arguments: + pAd Pointer to our adapter + + Return Value: + None + + IRQL = PASSIVE_LEVEL + + ======================================================================== +*/ +#ifndef RT30xx +VOID RTUSBFilterCalibration( + IN PRTMP_ADAPTER pAd) +{ + UCHAR R55x = 0, value, FilterTarget = 0x1E, BBPValue; + UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0; + UCHAR RF_R24_Value = 0; + + // Give bbp filter initial value + pAd->Mlme.CaliBW20RfR24 = 0x16; + pAd->Mlme.CaliBW40RfR24 = 0x36; //Bit[5] must be 1 for BW 40 + + do + { + if (loop == 1) //BandWidth = 40 MHz + { + // Write 0x27 to RF_R24 to program filter + RF_R24_Value = 0x27; + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + FilterTarget = 0x19; + + // when calibrate BW40, BBP mask must set to BW40. + RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue); + BBPValue&= (~0x18); + BBPValue|= (0x10); + RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue); + } + else //BandWidth = 20 MHz + { + // Write 0x07 to RF_R24 to program filter + RF_R24_Value = 0x07; + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + FilterTarget = 0x16; + } + + // Write 0x01 to RF_R22 to enable baseband loopback mode + RT30xxReadRFRegister(pAd, RF_R22, &value); + value |= 0x01; + RT30xxWriteRFRegister(pAd, RF_R22, value); + + // Write 0x00 to BBP_R24 to set power & frequency of passband test tone + RTUSBWriteBBPRegister(pAd, BBP_R24, 0); + + do + { + // Write 0x90 to BBP_R25 to transmit test tone + RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90); + + RTMPusecDelay(1000); + // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0] + RTUSBReadBBPRegister(pAd, BBP_R55, &value); + R55x = value & 0xFF; + + } while ((ReTry++ < 100) && (R55x == 0)); + + // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone + RTUSBWriteBBPRegister(pAd, BBP_R24, 0x06); + + while(TRUE) + { + // Write 0x90 to BBP_R25 to transmit test tone + RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90); + + //We need to wait for calibration + RTMPusecDelay(1000); + RTUSBReadBBPRegister(pAd, BBP_R55, &value); + value &= 0xFF; + if ((R55x - value) < FilterTarget) + { + RF_R24_Value ++; + } + else if ((R55x - value) == FilterTarget) + { + RF_R24_Value ++; + count ++; + } + else + { + break; + } + + // prevent infinite loop cause driver hang. + if (loopcnt++ > 100) + { + DBGPRINT(RT_DEBUG_ERROR, ("RTUSBFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt)); + break; + } + + // Write RF_R24 to program filter + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + } + + if (count > 0) + { + RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0)); + } + + // Store for future usage + if (loopcnt < 100) + { + if (loop++ == 0) + { + //BandWidth = 20 MHz + pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value; + } + else + { + //BandWidth = 40 MHz + pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value; + break; + } + } + else + break; + + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + + // reset count + count = 0; + } while(TRUE); + + // + // Set back to initial state + // + RTUSBWriteBBPRegister(pAd, BBP_R24, 0); + + RT30xxReadRFRegister(pAd, RF_R22, &value); + value &= ~(0x01); + RT30xxWriteRFRegister(pAd, RF_R22, value); + + // set BBP back to BW20 + RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue); + BBPValue&= (~0x18); + RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue); + + DBGPRINT(RT_DEBUG_TRACE, ("RTUSBFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24)); +} +#endif /* RT30xx */ +#ifdef RT30xx +VOID RTMPFilterCalibration( + IN PRTMP_ADAPTER pAd) +{ + UCHAR R55x = 0, value, FilterTarget = 0x1E, BBPValue=0; + UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0; + UCHAR RF_R24_Value = 0; + + // Give bbp filter initial value + pAd->Mlme.CaliBW20RfR24 = 0x1F; + pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40 + + do + { + if (loop == 1) //BandWidth = 40 MHz + { + // Write 0x27 to RF_R24 to program filter + RF_R24_Value = 0x27; + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + if (IS_RT3090(pAd)) + FilterTarget = 0x15; + else + FilterTarget = 0x19; + + // when calibrate BW40, BBP mask must set to BW40. + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); + BBPValue&= (~0x18); + BBPValue|= (0x10); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); + + // set to BW40 + RT30xxReadRFRegister(pAd, RF_R31, &value); + value |= 0x20; + RT30xxWriteRFRegister(pAd, RF_R31, value); + } + else //BandWidth = 20 MHz + { + // Write 0x07 to RF_R24 to program filter + RF_R24_Value = 0x07; + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + if (IS_RT3090(pAd)) + FilterTarget = 0x13; + else + FilterTarget = 0x16; + + // set to BW20 + RT30xxReadRFRegister(pAd, RF_R31, &value); + value &= (~0x20); + RT30xxWriteRFRegister(pAd, RF_R31, value); + } + + // Write 0x01 to RF_R22 to enable baseband loopback mode + RT30xxReadRFRegister(pAd, RF_R22, &value); + value |= 0x01; + RT30xxWriteRFRegister(pAd, RF_R22, value); + + // Write 0x00 to BBP_R24 to set power & frequency of passband test tone + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0); + + do + { + // Write 0x90 to BBP_R25 to transmit test tone + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90); + + RTMPusecDelay(1000); + // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0] + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value); + R55x = value & 0xFF; + + } while ((ReTry++ < 100) && (R55x == 0)); + + // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06); + + while(TRUE) + { + // Write 0x90 to BBP_R25 to transmit test tone + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90); + + //We need to wait for calibration + RTMPusecDelay(1000); + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value); + value &= 0xFF; + if ((R55x - value) < FilterTarget) + { + RF_R24_Value ++; + } + else if ((R55x - value) == FilterTarget) + { + RF_R24_Value ++; + count ++; + } + else + { + break; + } + + // prevent infinite loop cause driver hang. + if (loopcnt++ > 100) + { + DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt)); + break; + } + + // Write RF_R24 to program filter + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + } + + if (count > 0) + { + RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0)); + } + + // Store for future usage + if (loopcnt < 100) + { + if (loop++ == 0) + { + //BandWidth = 20 MHz + pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value; + } + else + { + //BandWidth = 40 MHz + pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value; + break; + } + } + else + break; + + RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); + + // reset count + count = 0; + } while(TRUE); + + // + // Set back to initial state + // + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0); + + RT30xxReadRFRegister(pAd, RF_R22, &value); + value &= ~(0x01); + RT30xxWriteRFRegister(pAd, RF_R22, value); + + // set BBP back to BW20 + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); + BBPValue&= (~0x18); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); + + DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24)); +} +#endif /* RT30xx */ + +VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) +{ + INT i; + // Driver must read EEPROM to get RfIcType before initial RF registers + // Initialize RF register to default value +#ifndef RT30xx + if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) ||(pAd->RfIcType == RFIC_2020))) + { + // Init RF calibration + // Driver should toggle RF R30 bit7 before init RF registers + ULONG RfReg = 0; + RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); + RfReg |= 0x80; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + RTMPusecDelay(1000); + RfReg &= 0x7F; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + + // Initialize RF register to default value + for (i = 0; i < NUM_RF_REG_PARMS; i++) + { + RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); + } + + //For RF filter Calibration + RTUSBFilterCalibration(pAd); + } +#endif +#ifdef RT30xx + if (IS_RT3070(pAd) || IS_RT3071(pAd)) + { + // Init RF calibration + // Driver should toggle RF R30 bit7 before init RF registers + UINT32 RfReg = 0; + UINT32 data; + + RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); + RfReg |= 0x80; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + RTMPusecDelay(1000); + RfReg &= 0x7F; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + + // Initialize RF register to default value + for (i = 0; i < NUM_RF_REG_PARMS; i++) + { + RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); + } + + // add by johnli + if (IS_RT3070(pAd)) + { + // Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate + RTUSBReadMACRegister(pAd, LDO_CFG0, &data); + data = ((data & 0xF0FFFFFF) | 0x0D000000); + RTUSBWriteMACRegister(pAd, LDO_CFG0, data); + } + else if (IS_RT3071(pAd)) + { + // Driver should set RF R6 bit6 on before init RF registers + RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg); + RfReg |= 0x40; + RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg); + + // init R31 + RT30xxWriteRFRegister(pAd, RF_R31, 0x14); + + // RT3071 version E has fixed this issue + if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211)) + { + // patch tx EVM issue temporarily + RTUSBReadMACRegister(pAd, LDO_CFG0, &data); + data = ((data & 0xE0FFFFFF) | 0x0D000000); + RTUSBWriteMACRegister(pAd, LDO_CFG0, data); + } + else + { + RTMP_IO_READ32(pAd, LDO_CFG0, &data); + data = ((data & 0xE0FFFFFF) | 0x01000000); + RTMP_IO_WRITE32(pAd, LDO_CFG0, data); + } + + // patch LNA_PE_G1 failed issue + RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data); + data &= ~(0x20); + RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data); + } + + //For RF filter Calibration + RTMPFilterCalibration(pAd); + + // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() + if ((pAd->MACVersion & 0xffff) < 0x0211) + RT30xxWriteRFRegister(pAd, RF_R27, 0x3); + + // set led open drain enable + RTUSBReadMACRegister(pAd, OPT_14, &data); + data |= 0x01; + RTUSBWriteMACRegister(pAd, OPT_14, data); + + if (IS_RT3071(pAd)) + { + // add by johnli, RF power sequence setup, load RF normal operation-mode setup + RT30xxLoadRFNormalModeSetup(pAd); + } + } +#endif +} +#endif // RT2870 // /* @@ -1245,11 +1675,25 @@ VOID NICReadEEPROMParameters( Antenna.word = pAd->EEPROMDefaultValue[0]; if (Antenna.word == 0xFFFF) { +#ifdef RT30xx + if(IS_RT3090(pAd)) + { + Antenna.word = 0; + Antenna.field.RfIcType = RFIC_3020; + Antenna.field.TxPath = 1; + Antenna.field.RxPath = 1; + } + else + { +#endif // RT30xx // Antenna.word = 0; Antenna.field.RfIcType = RFIC_2820; Antenna.field.TxPath = 1; Antenna.field.RxPath = 2; DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word)); +#ifdef RT30xx + } +#endif // RT30xx // } // Choose the desired Tx&Rx stream. @@ -1277,12 +1721,10 @@ VOID NICReadEEPROMParameters( NicConfig2.word = pAd->EEPROMDefaultValue[1]; - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { +#ifndef RT30xx NicConfig2.word = 0; +#endif if ((NicConfig2.word & 0x00ff) == 0xff) { NicConfig2.word &= 0xff00; @@ -1293,7 +1735,6 @@ VOID NICReadEEPROMParameters( NicConfig2.word &= 0x00ff; } } -#endif // CONFIG_STA_SUPPORT // if (NicConfig2.field.DynamicTxAgcControl == 1) pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE; @@ -1314,13 +1755,11 @@ VOID NICReadEEPROMParameters( if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11A)) pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; -#ifdef DOT11_N_SUPPORT else if ((pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)) pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED; -#endif // DOT11_N_SUPPORT // } // Read TSSI reference and TSSI boundary for temperature compensation. This is ugly @@ -1411,9 +1850,7 @@ VOID NICReadEEPROMParameters( TmpPhy = pAd->CommonCfg.PhyMode; pAd->CommonCfg.PhyMode = 0xff; RTMPSetPhyMode(pAd, TmpPhy); -#ifdef DOT11_N_SUPPORT SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // } // @@ -1480,10 +1917,13 @@ VOID NICReadEEPROMParameters( RTMPReadTxPwrPerRate(pAd); -#ifdef SINGLE_SKU - //pAd->CommonCfg.DefineMaxTxPwr = RTMP_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR); - RT28xx_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR, pAd->CommonCfg.DefineMaxTxPwr); -#endif // SINGLE_SKU // +#ifdef RT30xx + if (IS_RT30xx(pAd)) + { + eFusePhysicalReadRegisters(pAd, EFUSE_TAG, 2, &value); + pAd->EFuseTag = (value & 0xff); + } +#endif // RT30xx // DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n")); } @@ -1509,10 +1949,8 @@ VOID NICReadEEPROMParameters( VOID NICInitAsicFromEEPROM( IN PRTMP_ADAPTER pAd) { -#ifdef CONFIG_STA_SUPPORT UINT32 data = 0; UCHAR BBPR1 = 0; -#endif // CONFIG_STA_SUPPORT // USHORT i; EEPROM_ANTENNA_STRUC Antenna; EEPROM_NIC_CONFIG2_STRUC NicConfig2; @@ -1531,16 +1969,49 @@ VOID NICInitAsicFromEEPROM( } } +#ifndef RT30xx Antenna.word = pAd->Antenna.word; +#endif +#ifdef RT30xx + Antenna.word = pAd->EEPROMDefaultValue[0]; + if (Antenna.word == 0xFFFF) + { + DBGPRINT(RT_DEBUG_ERROR, ("E2PROM error, hard code as 0x%04x\n", Antenna.word)); + BUG_ON(Antenna.word == 0xFFFF); + } +#endif pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath; pAd->RfIcType = (UCHAR) Antenna.field.RfIcType; +#ifdef RT30xx + DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath)); + + // Save the antenna for future use + pAd->Antenna.word = Antenna.word; +#endif NicConfig2.word = pAd->EEPROMDefaultValue[1]; +#ifdef RT30xx + { + if ((NicConfig2.word & 0x00ff) == 0xff) + { + NicConfig2.word &= 0xff00; + } + if ((NicConfig2.word >> 8) == 0xff) + { + NicConfig2.word &= 0x00ff; + } + } +#endif // Save the antenna for future use pAd->NicConfig2.word = NicConfig2.word; +#ifdef RT30xx + // set default antenna as main + if (pAd->RfIcType == RFIC_3020) + AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); +#endif // // Send LED Setting to MCU. // @@ -1549,7 +2020,13 @@ VOID NICInitAsicFromEEPROM( pAd->LedCntl.word = 0x01; pAd->Led1 = 0x5555; pAd->Led2 = 0x2221; +#ifdef RT2860 pAd->Led3 = 0xA9F8; +#endif + +#ifdef RT2870 + pAd->Led3 = 0x5627; +#endif // RT2870 // } AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8)); @@ -1558,8 +2035,6 @@ VOID NICInitAsicFromEEPROM( pAd->LedIndicatorStregth = 0xFF; RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, before link up -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // Read Hardware controlled Radio state enable bit if (NicConfig2.field.HardwareRadioControl == 1) @@ -1585,13 +2060,14 @@ VOID NICInitAsicFromEEPROM( else { RTMPSetLED(pAd, LED_RADIO_ON); +#ifdef RT2860 AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02); AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00); // 2-1. wait command ok. AsicCheckCommanOk(pAd, PowerWakeCID); +#endif } } -#endif // CONFIG_STA_SUPPORT // // Turn off patching for cardbus controller if (NicConfig2.field.CardbusAcceleration == 1) @@ -1624,8 +2100,6 @@ VOID NICInitAsicFromEEPROM( } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // Handle the difference when 1T RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1); @@ -1637,7 +2111,7 @@ VOID NICInitAsicFromEEPROM( DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio)); } -#endif // CONFIG_STA_SUPPORT // + DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word)); DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n")); } @@ -1666,8 +2140,10 @@ NDIS_STATUS NICInitializeAdapter( { NDIS_STATUS Status = NDIS_STATUS_SUCCESS; WPDMA_GLO_CFG_STRUC GloCfg; +#ifdef RT2860 UINT32 Value; DELAY_INT_CFG_STRUC IntCfg; +#endif ULONG i =0, j=0; AC_TXOP_CSR0_STRUC csr0; @@ -1706,9 +2182,11 @@ retry: // asic simulation sequence put this ahead before loading firmware. // pbf hardware reset +#ifdef RT2860 RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f); // 0x10000 for reset rx, 0x3f resets all 6 tx rings. RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe1f); RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe00); +#endif // Initialze ASIC for TX & Rx operation if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS) @@ -1722,6 +2200,7 @@ retry: } +#ifdef RT2860 // Write AC_BK base address register Value = RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BK].Cell[0].AllocPa); RTMP_IO_WRITE32(pAd, TX_BASE_PTR1, Value); @@ -1794,6 +2273,7 @@ retry: // Write RX_RING_CSR register Value = RX_RING_SIZE; RTMP_IO_WRITE32(pAd, RX_MAX_CNT, Value); +#endif /* RT2860 */ // WMM parameter @@ -1812,6 +2292,7 @@ retry: RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word); +#ifdef RT2860 // 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits: i = 0; do @@ -1830,6 +2311,7 @@ retry: IntCfg.word = 0; RTMP_IO_WRITE32(pAd, DELAY_INT_CFG, IntCfg.word); +#endif // reset action @@ -1865,36 +2347,133 @@ NDIS_STATUS NICInitializeAsic( ULONG Index = 0; UCHAR R0 = 0xff; UINT32 MacCsr12 = 0, Counter = 0; +#ifdef RT2870 + UINT32 MacCsr0 = 0; + NTSTATUS Status; + UCHAR Value = 0xff; +#endif // RT2870 // +#ifdef RT30xx + UINT32 eFuseCtrl; +#endif // RT30xx // USHORT KeyIdx; INT i,apidx; DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n")); +#ifdef RT2860 if (bHardReset == TRUE) { RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3); } else RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1); +#endif +#ifdef RT2870 + // + // Make sure MAC gets ready after NICLoadFirmware(). + // + Index = 0; + + //To avoid hang-on issue when interface up in kernel 2.4, + //we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly. + do + { + RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0); + + if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF)) + break; + + RTMPusecDelay(10); + } while (Index++ < 100); + + pAd->MACVersion = MacCsr0; + DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion)); + // turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue. + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacCsr12); + MacCsr12 &= (~0x2000); + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, MacCsr12); + + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3); + RTMP_IO_WRITE32(pAd, USB_DMA_CFG, 0x0); + Status = RTUSBVenderReset(pAd); +#endif RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0); + // Initialize MAC register to default value +#ifdef RT2860 for (Index = 0; Index < NUM_MAC_REG_PARMS; Index++) { RTMP_IO_WRITE32(pAd, MACRegTable[Index].Register, MACRegTable[Index].Value); } +#endif +#ifdef RT2870 + for(Index=0; Index<NUM_MAC_REG_PARMS; Index++) + { +#ifdef RT3070 + if ((MACRegTable[Index].Register == TX_SW_CFG0) && (IS_RT3070(pAd) || IS_RT3071(pAd))) + { + MACRegTable[Index].Value = 0x00000400; + } +#endif // RT3070 // + RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value); + } + +#ifndef RT30xx + if(IS_RT3070(pAd)) + { + // According to Frank Hsu (from Gary Tsao) + RTMP_IO_WRITE32(pAd, (USHORT)TX_SW_CFG0, 0x00000400); + + // Initialize RT3070 serial MAC registers which is different from RT2870 serial + RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0); + RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0); + } +#endif +#endif // RT2870 // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++) { +#ifdef RT2860 RTMP_IO_WRITE32(pAd, STAMACRegTable[Index].Register, STAMACRegTable[Index].Value); +#endif +#ifdef RT2870 + RTMP_IO_WRITE32(pAd, (USHORT)STAMACRegTable[Index].Register, STAMACRegTable[Index].Value); +#endif } } -#endif // CONFIG_STA_SUPPORT // +#ifdef RT30xx + // Initialize RT3070 serial MAc registers which is different from RT2870 serial + if (IS_RT3090(pAd)) + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0); + + // RT3071 version E has fixed this issue + if ((pAd->MACVersion & 0xffff) < 0x0211) + { + if (pAd->NicConfig2.field.DACTestBit == 1) + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F); // To fix throughput drop drastically + } + else + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F); // To fix throughput drop drastically + } + } + else + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0); + } + } + else if (IS_RT3070(pAd)) + { + RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0); + RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F); // To fix throughput drop drastically + } +#endif // RT30xx // // // Before program BBP, we need to wait BBP/RF get wake up. @@ -1935,11 +2514,69 @@ NDIS_STATUS NICInitializeAsic( RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value); } +#ifndef RT30xx // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. if ((pAd->MACVersion&0xffff) != 0x0101) RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19); +#ifdef RT2870 + //write RT3070 BBP wchich different with 2870 after write RT2870 BBP + if (IS_RT3070(pAd)) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x99); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05); + } +#endif // RT2870 // +#endif +#ifdef RT30xx + // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. + // RT3090 should not program BBP R84 to 0x19, otherwise TX will block. + if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd))) + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19); + +// add by johnli, RF power sequence setup + if (IS_RT30xx(pAd)) + { //update for RT3070/71/72/90/91/92. + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R79, 0x13); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R80, 0x05); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R81, 0x33); + } + + if (IS_RT3090(pAd)) + { + UCHAR bbpreg=0; + + // enable DC filter + if ((pAd->MACVersion & 0xffff) >= 0x0211) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0); + } + // improve power consumption + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg); + if (pAd->Antenna.field.TxPath == 1) + { + // turn off tx DAC_1 + bbpreg = (bbpreg | 0x20); + } + + if (pAd->Antenna.field.RxPath == 1) + { + // turn off tx ADC_1 + bbpreg &= (~0x2); + } + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg); + + // improve power consumption in RT3071 Ver.E + if ((pAd->MACVersion & 0xffff) >= 0x0211) + { + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg); + bbpreg &= (~0x3); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg); + } + } +#endif if (pAd->MACVersion == 0x28600100) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16); @@ -1956,10 +2593,20 @@ NDIS_STATUS NICInitializeAsic( RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, csr); } +#ifdef RT2870 +{ + UCHAR MAC_Value[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0,0}; + + //Initialize WCID table + Value = 0xff; + for(Index =0 ;Index < 254;Index++) + { + RTUSBMultiWrite(pAd, (USHORT)(MAC_WCID_BASE + Index * 8), MAC_Value, 8); + } +} +#endif // RT2870 // // Add radio off control -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pAd->StaCfg.bRadio == FALSE) { @@ -1968,7 +2615,6 @@ NDIS_STATUS NICInitializeAsic( DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n")); } } -#endif // CONFIG_STA_SUPPORT // // Clear raw counters RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter); @@ -2006,21 +2652,48 @@ NDIS_STATUS NICInitializeAsic( RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[apidx] + i, 0x00); } } +#ifdef RT2870 + AsicDisableSync(pAd); + // Clear raw counters + RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter); + RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter); + RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter); + RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter); + RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter); + RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter); + // Default PCI clock cycle per ms is different as default setting, which is based on PCI. + RTMP_IO_READ32(pAd, USB_CYC_CFG, &Counter); + Counter&=0xffffff00; + Counter|=0x000001e; + RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter); +#endif // RT2870 // +#ifdef RT30xx + pAd->bUseEfuse=FALSE; + RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrl); + pAd->bUseEfuse = ( (eFuseCtrl & 0x80000000) == 0x80000000) ? 1 : 0; + if(pAd->bUseEfuse) + { + DBGPRINT(RT_DEBUG_TRACE, ("NVM is Efuse\n")); + } + else + { + DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n")); + + } +#endif // RT30xx // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT. if ((pAd->MACVersion&0xffff) != 0x0101) RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f); } -#endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n")); return NDIS_STATUS_SUCCESS; } +#ifdef RT2860 VOID NICRestoreBBPValue( IN PRTMP_ADAPTER pAd) { @@ -2144,6 +2817,7 @@ VOID NICRestoreBBPValue( DBGPRINT(RT_DEBUG_TRACE, ("<--- NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!! \n")); } +#endif /* RT2860 */ /* ======================================================================== @@ -2214,12 +2888,6 @@ VOID NICUpdateFifoStaCounters( CHAR reTry; UCHAR succMCS; -#ifdef RALINK_ATE - /* Nothing to do in ATE mode */ - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - do { RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word); @@ -2244,10 +2912,8 @@ VOID NICUpdateFifoStaCounters( pEntry->DebugFIFOCount++; -#ifdef DOT11_N_SUPPORT if (StaFifo.field.TxBF) // 3*3 pEntry->TxBFCount++; -#endif // DOT11_N_SUPPORT // #ifdef UAPSD_AP_SUPPORT UAPSD_SP_AUE_Handle(pAd, pEntry, StaFifo.field.TxSuccess); @@ -2261,23 +2927,15 @@ VOID NICUpdateFifoStaCounters( if (pEntry->FIFOCount >= 1) { DBGPRINT(RT_DEBUG_TRACE, ("#")); -#if 0 - SendRefreshBAR(pAd, pEntry); pEntry->NoBADataCountDown = 64; -#else -#ifdef DOT11_N_SUPPORT - pEntry->NoBADataCountDown = 64; -#endif // DOT11_N_SUPPORT // if(pEntry->PsMode == PWR_ACTIVE) { -#ifdef DOT11_N_SUPPORT int tid; for (tid=0; tid<NUM_OF_TID; tid++) { BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, FALSE); } -#endif // DOT11_N_SUPPORT // // Update the continuous transmission counter except PS mode pEntry->ContinueTxFailCnt++; @@ -2289,14 +2947,10 @@ VOID NICUpdateFifoStaCounters( pEntry->FIFOCount = 0; pEntry->ContinueTxFailCnt = 0; } -#endif - //pEntry->FIFOCount = 0; } - //pEntry->bSendBAR = TRUE; } else { -#ifdef DOT11_N_SUPPORT if ((pEntry->PsMode != PWR_SAVE) && (pEntry->NoBADataCountDown > 0)) { pEntry->NoBADataCountDown--; @@ -2305,7 +2959,7 @@ VOID NICUpdateFifoStaCounters( DBGPRINT(RT_DEBUG_TRACE, ("@\n")); } } -#endif // DOT11_N_SUPPORT // + pEntry->FIFOCount = 0; pEntry->OneSecTxNoRetryOkCount++; // update NoDataIdleCount when sucessful send packet to STA. @@ -2416,6 +3070,22 @@ VOID NICUpdateRawCounters( // Update RX Overflow counter pAd->Counters8023.RxNoBuffer += (RxStaCnt2.field.RxFifoOverflowCount); +#ifdef RT2870 + if (pAd->RalinkCounters.RxCount != pAd->watchDogRxCnt) + { + pAd->watchDogRxCnt = pAd->RalinkCounters.RxCount; + pAd->watchDogRxOverFlowCnt = 0; + } + else + { + if (RxStaCnt2.field.RxFifoOverflowCount) + pAd->watchDogRxOverFlowCnt++; + else + pAd->watchDogRxOverFlowCnt = 0; + } +#endif // RT2870 // + + if (!pAd->bUpdateBcnCntDone) { // Update BEACON sent count @@ -2643,217 +3313,46 @@ VOID NICEraseFirmware( NDIS_STATUS NICLoadFirmware( IN PRTMP_ADAPTER pAd) { -#ifdef BIN_IN_FILE -#define NICLF_DEFAULT_USE() \ - flg_default_firm_use = TRUE; \ - printk("%s - Use default firmware!\n", __func__); - NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - PUCHAR src; - struct file *srcf; - INT retval, orgfsuid, orgfsgid, i; - mm_segment_t orgfs; PUCHAR pFirmwareImage; - UINT FileLength = 0; - UINT32 MacReg; - ULONG Index; - ULONG firm; - BOOLEAN flg_default_firm_use = FALSE; - - - DBGPRINT(RT_DEBUG_TRACE, ("===> %s\n", __func__)); - - /* init */ - pFirmwareImage = NULL; - src = RTMP_FIRMWARE_FILE_NAME; - - /* save uid and gid used for filesystem access. - set user and group to 0 (root) */ - orgfsuid = current->fsuid; - orgfsgid = current->fsgid; - current->fsuid = current->fsgid = 0; - orgfs = get_fs(); - set_fs(KERNEL_DS); - - pAd->FirmwareVersion = (FIRMWARE_MAJOR_VERSION << 8) + \ - FIRMWARE_MINOR_VERSION; - - - /* allocate firmware buffer */ - pFirmwareImage = kmalloc(MAX_FIRMWARE_IMAGE_SIZE, MEM_ALLOC_FLAG); - if (pFirmwareImage == NULL) - { - /* allocate fail, use default firmware array in firmware.h */ - printk("%s - Allocate memory fail!\n", __func__); - NICLF_DEFAULT_USE(); - } - else - { - /* allocate ok! zero the firmware buffer */ - memset(pFirmwareImage, 0x00, MAX_FIRMWARE_IMAGE_SIZE); - } /* End of if */ - + ULONG FileLength, Index; + //ULONG firm; + UINT32 MacReg = 0; +#ifdef RT2870 + UINT32 Version = (pAd->MACVersion >> 16); +#endif // RT2870 // - /* if ok, read firmware file from *.bin file */ - if (flg_default_firm_use == FALSE) + pFirmwareImage = FirmwareImage; + FileLength = sizeof(FirmwareImage); +#ifdef RT2870 + // New 8k byte firmware size for RT3071/RT3072 + //printk("Usb Chip\n"); + if (FIRMWAREIMAGE_LENGTH == FIRMWAREIMAGE_MAX_LENGTH) + //The firmware image consists of two parts. One is the origianl and the other is the new. + //Use Second Part { - do - { - /* open the bin file */ - srcf = filp_open(src, O_RDONLY, 0); - - if (IS_ERR(srcf)) - { - printk("%s - Error %ld opening %s\n", - __func__, -PTR_ERR(srcf), src); - NICLF_DEFAULT_USE(); - break; - } /* End of if */ - - /* the object must have a read method */ - if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL)) - { - printk("%s - %s does not have a write method\n", __func__, src); - NICLF_DEFAULT_USE(); - break; - } /* End of if */ - - /* read the firmware from the file *.bin */ - FileLength = srcf->f_op->read(srcf, - pFirmwareImage, - MAX_FIRMWARE_IMAGE_SIZE, - &srcf->f_pos); - - if (FileLength != MAX_FIRMWARE_IMAGE_SIZE) - { - printk("%s: error file length (=%d) in RT2860AP.BIN\n", - __func__, FileLength); - NICLF_DEFAULT_USE(); - break; - } - else - { - PUCHAR ptr = pFirmwareImage; - USHORT crc = 0xffff; - - - /* calculate firmware CRC */ - for(i=0; i<(MAX_FIRMWARE_IMAGE_SIZE-2); i++, ptr++) - crc = ByteCRC16(bitrev8(*ptr), crc); - /* End of for */ - - if ((pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2] != \ - (UCHAR)bitrev8((UCHAR)(crc>>8))) || - (pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1] != \ - (UCHAR)bitrev8((UCHAR)crc))) - { - /* CRC fail */ - printk("%s: CRC = 0x%02x 0x%02x " - "error, should be 0x%02x 0x%02x\n", - __func__, - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2], - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1], - (UCHAR)(crc>>8), (UCHAR)(crc)); - NICLF_DEFAULT_USE(); - break; - } - else - { - /* firmware is ok */ - pAd->FirmwareVersion = \ - (pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4] << 8) + - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3]; - - /* check if firmware version of the file is too old */ - if ((pAd->FirmwareVersion) < \ - ((FIRMWARE_MAJOR_VERSION << 8) + - FIRMWARE_MINOR_VERSION)) - { - printk("%s: firmware version too old!\n", __func__); - NICLF_DEFAULT_USE(); - break; - } /* End of if */ - } /* End of if */ - - DBGPRINT(RT_DEBUG_TRACE, - ("NICLoadFirmware: CRC ok, ver=%d.%d\n", - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4], - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3])); - } /* End of if (FileLength == MAX_FIRMWARE_IMAGE_SIZE) */ - break; - } while(TRUE); - - /* close firmware file */ - if (IS_ERR(srcf)) - ; + if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070)) + { // Use Firmware V2. + //printk("KH:Use New Version,part2\n"); + pFirmwareImage = (PUCHAR)&FirmwareImage[FIRMWAREIMAGEV1_LENGTH]; + FileLength = FIRMWAREIMAGEV2_LENGTH; + } else { - retval = filp_close(srcf, NULL); - if (retval) - { - DBGPRINT(RT_DEBUG_ERROR, - ("--> Error %d closing %s\n", -retval, src)); - } /* End of if */ - } /* End of if */ - } /* End of if */ - - - /* write firmware to ASIC */ - if (flg_default_firm_use == TRUE) - { - /* use default fimeware, free allocated buffer */ - if (pFirmwareImage != NULL) - kfree(pFirmwareImage); - /* End of if */ - - /* use default *.bin array */ - pFirmwareImage = FirmwareImage; - FileLength = sizeof(FirmwareImage); - } /* End of if */ - - /* enable Host program ram write selection */ - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x10000); - - for(i=0; i<FileLength; i+=4) - { - firm = pFirmwareImage[i] + - (pFirmwareImage[i+3] << 24) + - (pFirmwareImage[i+2] << 16) + - (pFirmwareImage[i+1] << 8); - - RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, firm); - } /* End of for */ - - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00000); - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00001); - - /* initialize BBP R/W access agent */ - RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0); - RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0); - - if (flg_default_firm_use == FALSE) + //printk("KH:Use New Version,part1\n"); + pFirmwareImage = FirmwareImage; + FileLength = FIRMWAREIMAGEV1_LENGTH; + } + } + else { - /* use file firmware, free allocated buffer */ - if (pFirmwareImage != NULL) - kfree(pFirmwareImage); - /* End of if */ - } /* End of if */ + DBGPRINT(RT_DEBUG_ERROR, ("KH: bin file should be 8KB.\n")); + Status = NDIS_STATUS_FAILURE; + } - set_fs(orgfs); - current->fsuid = orgfsuid; - current->fsgid = orgfsgid; -#else +#endif // RT2870 // - NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - PUCHAR pFirmwareImage; - ULONG FileLength, Index; - //ULONG firm; - UINT32 MacReg = 0; - - pFirmwareImage = FirmwareImage; - FileLength = sizeof(FirmwareImage); RT28XX_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength); -#endif /* check if MCU is ready */ Index = 0; @@ -2867,7 +3366,7 @@ NDIS_STATUS NICLoadFirmware( RTMPusecDelay(1000); } while (Index++ < 1000); - if (Index >= 1000) + if (Index > 1000) { Status = NDIS_STATUS_FAILURE; DBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware: MCU is not ready\n\n\n")); @@ -3118,6 +3617,31 @@ VOID UserCfgInit( // // part I. intialize common configuration // +#ifdef RT2870 + pAd->BulkOutReq = 0; + + pAd->BulkOutComplete = 0; + pAd->BulkOutCompleteOther = 0; + pAd->BulkOutCompleteCancel = 0; + pAd->BulkInReq = 0; + pAd->BulkInComplete = 0; + pAd->BulkInCompleteFail = 0; + + //pAd->QuickTimerP = 100; + //pAd->TurnAggrBulkInCount = 0; + pAd->bUsbTxBulkAggre = 0; + + // init as unsed value to ensure driver will set to MCU once. + pAd->LedIndicatorStregth = 0xFF; + + pAd->CommonCfg.MaxPktOneTxBulk = 2; + pAd->CommonCfg.TxBulkFactor = 1; + pAd->CommonCfg.RxBulkFactor =1; + + pAd->CommonCfg.TxPower = 100; //mW + + NdisZeroMemory(&pAd->CommonCfg.IOTestParm, sizeof(pAd->CommonCfg.IOTestParm)); +#endif // RT2870 // for(key_index=0; key_index<SHARE_KEY_NUM; key_index++) { @@ -3128,14 +3652,19 @@ VOID UserCfgInit( } } +#ifdef RT30xx + pAd->EepromAccess = FALSE; +#endif pAd->Antenna.word = 0; pAd->CommonCfg.BBPCurrentBW = BW_20; pAd->LedCntl.word = 0; +#ifdef RT2860 pAd->LedIndicatorStregth = 0; pAd->RLnkCtrlOffset = 0; pAd->HostLnkCtrlOffset = 0; pAd->CheckDmaBusyCount = 0; +#endif pAd->bAutoTxAgcA = FALSE; // Default is OFF pAd->bAutoTxAgcG = FALSE; // Default is OFF @@ -3176,23 +3705,11 @@ VOID UserCfgInit( NdisZeroMemory(&pAd->BeaconTxWI, sizeof(pAd->BeaconTxWI)); -#ifdef DOT11_N_SUPPORT NdisZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability)); pAd->HTCEnable = FALSE; pAd->bBroadComHT = FALSE; pAd->CommonCfg.bRdg = FALSE; -#ifdef DOT11N_DRAFT3 - pAd->CommonCfg.Dot11OBssScanPassiveDwell = dot11OBSSScanPassiveDwell; // Unit : TU. 5~1000 - pAd->CommonCfg.Dot11OBssScanActiveDwell = dot11OBSSScanActiveDwell; // Unit : TU. 10~1000 - pAd->CommonCfg.Dot11BssWidthTriggerScanInt = dot11BSSWidthTriggerScanInterval; // Unit : Second - pAd->CommonCfg.Dot11OBssScanPassiveTotalPerChannel = dot11OBSSScanPassiveTotalPerChannel; // Unit : TU. 200~10000 - pAd->CommonCfg.Dot11OBssScanActiveTotalPerChannel = dot11OBSSScanActiveTotalPerChannel; // Unit : TU. 20~10000 - pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor = dot11BSSWidthChannelTransactionDelayFactor; - pAd->CommonCfg.Dot11OBssScanActivityThre = dot11BSSScanActivityThreshold; // Unit : percentage - pAd->CommonCfg.Dot11BssWidthChanTranDelay = (pAd->CommonCfg.Dot11BssWidthTriggerScanInt * pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor); -#endif // DOT11N_DRAFT3 // - NdisZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo)); pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE; pAd->CommonCfg.BACapability.field.MpduDensity = 0; @@ -3213,7 +3730,6 @@ VOID UserCfgInit( pAd->CommonCfg.TxBASize = 7; pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word; -#endif // DOT11_N_SUPPORT // //pAd->CommonCfg.HTPhyMode.field.BW = BW_20; //pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO; @@ -3230,8 +3746,6 @@ VOID UserCfgInit( // // part II. intialize STA specific configuration // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT); RX_FILTER_CLEAR_FLAG(pAd, fRX_FILTER_ACCEPT_MULTICAST); @@ -3270,11 +3784,6 @@ VOID UserCfgInit( pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; } -#ifdef EXT_BUILD_CHANNEL_LIST - pAd->StaCfg.IEEE80211dClientMode = Rt802_11_D_None; -#endif // EXT_BUILD_CHANNEL_LIST // -#endif // CONFIG_STA_SUPPORT // - // global variables mXXXX used in MAC protocol state machines OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON); @@ -3284,21 +3793,12 @@ VOID UserCfgInit( pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; // default PHY mode OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED); // CCK use LONG preamble -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // user desired power mode pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM; pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM; pAd->StaCfg.bWindowsACCAMEnable = FALSE; -#ifdef LEAP_SUPPORT - // CCX v1.0 releated init value - RTMPInitTimer(pAd, &pAd->StaCfg.LeapAuthTimer, GET_TIMER_FUNCTION(LeapAuthTimeout), pAd, FALSE); - pAd->StaCfg.LeapAuthMode = CISCO_AuthModeLEAPNone; - pAd->StaCfg.bCkipOn = FALSE; -#endif // LEAP_SUPPORT // - RTMPInitTimer(pAd, &pAd->StaCfg.StaQuickResponeForRateUpTimer, GET_TIMER_FUNCTION(StaQuickResponeForRateUpExec), pAd, FALSE); pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE; @@ -3326,17 +3826,11 @@ VOID UserCfgInit( NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE+1); sprintf(pAd->nickname, "%s", STA_NIC_DEVICE_NAME); RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer, GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc), pAd, FALSE); -#ifdef WPA_SUPPLICANT_SUPPORT pAd->StaCfg.IEEE8021X = FALSE; pAd->StaCfg.IEEE8021x_required_keys = FALSE; pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE; -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE; -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // -#endif // WPA_SUPPLICANT_SUPPORT // - } -#endif // CONFIG_STA_SUPPORT // // Default for extra information is not valid pAd->ExtraInfo = EXTRA_INFO_CLEAR; @@ -3373,41 +3867,12 @@ VOID UserCfgInit( InitializeQueueHeader(&pAd->MacTab.McastPsQueue); NdisAllocateSpinLock(&pAd->MacTabLock); -#ifdef RALINK_ATE - NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO)); - pAd->ate.Mode = ATE_STOP; - pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */ - pAd->ate.TxLength = 1024; - pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns - pAd->ate.TxWI.PHYMODE = MODE_CCK; - pAd->ate.TxWI.MCS = 3; - pAd->ate.TxWI.BW = BW_20; - pAd->ate.Channel = 1; - pAd->ate.QID = QID_AC_BE; - pAd->ate.Addr1[0] = 0x00; - pAd->ate.Addr1[1] = 0x11; - pAd->ate.Addr1[2] = 0x22; - pAd->ate.Addr1[3] = 0xAA; - pAd->ate.Addr1[4] = 0xBB; - pAd->ate.Addr1[5] = 0xCC; - NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS); - NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS); - pAd->ate.bRxFer = 0; - pAd->ate.bQATxStart = FALSE; - pAd->ate.bQARxStart = FALSE; - pAd->ate.bFWLoading = FALSE; -#ifdef RALINK_28xx_QA - //pAd->ate.Repeat = 0; - pAd->ate.TxStatus = 0; - pAd->ate.AtePid = THREAD_PID_INIT_VALUE; -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - - pAd->CommonCfg.bWiFiTest = FALSE; +#ifdef RT2860 pAd->bPCIclkOff = FALSE; RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); +#endif DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n")); } @@ -3509,6 +3974,9 @@ VOID RTMPInitTimer( pTimer->State = FALSE; pTimer->cookie = (ULONG) pData; +#ifdef RT2870 + pTimer->pAd = pAd; +#endif // RT2870 // RTMP_OS_Init_Timer(pAd, &pTimer->TimerObj, pTimerFunc, (PVOID) pTimer); } @@ -3635,6 +4103,12 @@ VOID RTMPCancelTimer( if (*pCancelled == TRUE) pTimer->State = TRUE; +#ifdef RT2870 + // We need to go-through the TimerQ to findout this timer handler and remove it if + // it's still waiting for execution. + + RT2870_TimerQ_Remove(pTimer->pAd, pTimer); +#endif // RT2870 // } else { @@ -3674,13 +4148,6 @@ VOID RTMPSetLED( UCHAR HighByte = 0; UCHAR LowByte; -// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware. -// So LED mode is not supported when ATE is running. -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - LowByte = pAd->LedCntl.field.LedMode&0x7f; switch (Status) { diff --git a/drivers/staging/rt2860/common/rtmp_tkip.c b/drivers/staging/rt2860/common/rtmp_tkip.c index a87ea3a5d3ea..4a7fda69f9b4 100644 --- a/drivers/staging/rt2860/common/rtmp_tkip.c +++ b/drivers/staging/rt2860/common/rtmp_tkip.c @@ -199,15 +199,9 @@ typedef struct PACKED _IV_CONTROL_ { struct PACKED { -#ifdef RT_BIG_ENDIAN - UCHAR KeyID:2; - UCHAR ExtIV:1; - UCHAR Rsvd:5; -#else UCHAR Rsvd:5; UCHAR ExtIV:1; UCHAR KeyID:2; -#endif } field; UCHAR Byte; } CONTROL; @@ -1114,10 +1108,6 @@ BOOLEAN RTMPSoftDecryptTKIP( UCHAR MIC[8]; UCHAR TrailMIC[8]; -#ifdef RT_BIG_ENDIAN - RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE); -#endif - fc0 = *pData; fc1 = *(pData + 1); @@ -1224,9 +1214,6 @@ BOOLEAN RTMPSoftDecryptTKIP( return (FALSE); } -#ifdef RT_BIG_ENDIAN - RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE); -#endif return TRUE; } @@ -1266,10 +1253,6 @@ BOOLEAN RTMPSoftDecryptAES( UCHAR MIC[8]; UCHAR TrailMIC[8]; -#ifdef RT_BIG_ENDIAN - RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE); -#endif - fc0 = *pData; fc1 = *(pData + 1); @@ -1437,10 +1420,6 @@ BOOLEAN RTMPSoftDecryptAES( return FALSE; } -#ifdef RT_BIG_ENDIAN - RTMPFrameEndianChange(pAd, (PUCHAR)pData, DIR_READ, FALSE); -#endif - return TRUE; } diff --git a/drivers/staging/rt2860/common/rtmp_wep.c b/drivers/staging/rt2860/common/rtmp_wep.c index ffe26c237950..8e833e7011bd 100644 --- a/drivers/staging/rt2860/common/rtmp_wep.c +++ b/drivers/staging/rt2860/common/rtmp_wep.c @@ -144,14 +144,12 @@ VOID RTMPInitWepEngine( pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32; //Init crc32. -#ifdef CONFIG_STA_SUPPORT if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10) && (pAd->OpMode == OPMODE_STA)) { ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, pKey, KeyLen); //INIT SBOX, KEYLEN+3(IV) NdisMoveMemory(pDest, pKey, 3); //Append Init Vector } else -#endif // CONFIG_STA_SUPPORT // { NdisMoveMemory(WEPKEY + 3, pKey, KeyLen); diff --git a/drivers/staging/rt2860/common/spectrum.c b/drivers/staging/rt2860/common/spectrum.c index b3650ec46563..101c2923ca37 100644 --- a/drivers/staging/rt2860/common/spectrum.c +++ b/drivers/staging/rt2860/common/spectrum.c @@ -1060,27 +1060,6 @@ VOID NotifyChSwAnnToPeerAPs( IN UINT8 ChSwMode, IN UINT8 Channel) { -#ifdef WDS_SUPPORT - if (!((pRA[0] & 0xff) == 0xff)) // is pRA a broadcase address. - { - INT i; - // info neighbor APs that Radar signal found throgh WDS link. - for (i = 0; i < MAX_WDS_ENTRY; i++) - { - if (ValidWdsEntry(pAd, i)) - { - PUCHAR pDA = pAd->WdsTab.WdsEntry[i].PeerWdsAddr; - - // DA equal to SA. have no necessary orignal AP which found Radar signal. - if (MAC_ADDR_EQUAL(pTA, pDA)) - continue; - - // send Channel Switch Action frame to info Neighbro APs. - EnqueueChSwAnn(pAd, pDA, ChSwMode, Channel); - } - } - } -#endif // WDS_SUPPORT // } static VOID StartDFSProcedure( @@ -1090,9 +1069,9 @@ static VOID StartDFSProcedure( { // start DFS procedure pAd->CommonCfg.Channel = Channel; -#ifdef DOT11_N_SUPPORT + N_ChannelCheck(pAd); -#endif // DOT11_N_SUPPORT // + pAd->CommonCfg.RadarDetect.RDMode = RD_SWITCHING_MODE; pAd->CommonCfg.RadarDetect.CSCount = 0; } @@ -1475,10 +1454,8 @@ static VOID PeerChSwAnnAction( { CH_SW_ANN_INFO ChSwAnnInfo; PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg; -#ifdef CONFIG_STA_SUPPORT UCHAR index = 0, Channel = 0, NewChannel = 0; ULONG Bssidx = 0; -#endif // CONFIG_STA_SUPPORT // NdisZeroMemory(&ChSwAnnInfo, sizeof(CH_SW_ANN_INFO)); if (! PeerChSwAnnSanity(pAd, Elem->Msg, Elem->MsgLen, &ChSwAnnInfo)) @@ -1487,8 +1464,6 @@ static VOID PeerChSwAnnAction( return; } - -#ifdef CONFIG_STA_SUPPORT if (pAd->OpMode == OPMODE_STA) { Bssidx = BssTableSearch(&pAd->ScanTab, pFr->Hdr.Addr3, pAd->CommonCfg.Channel); @@ -1535,7 +1510,6 @@ static VOID PeerChSwAnnAction( } } } -#endif // CONFIG_STA_SUPPORT // return; } @@ -1596,7 +1570,12 @@ static VOID PeerMeasureReportAction( if ((pMeasureReportInfo = kmalloc(sizeof(MEASURE_RPI_REPORT), GFP_ATOMIC)) == NULL) { +#ifndef RT30xx DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%zu).\n", __func__, sizeof(MEASURE_RPI_REPORT))); +#endif +#ifdef RT30xx + DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%d).\n", __func__, sizeof(MEASURE_RPI_REPORT))); +#endif return; } @@ -1756,28 +1735,6 @@ VOID PeerSpectrumAction( case SPEC_CHANNEL_SWITCH: { -#ifdef DOT11N_DRAFT3 - SEC_CHA_OFFSET_IE Secondary; - CHA_SWITCH_ANNOUNCE_IE ChannelSwitch; - - // 802.11h only has Channel Switch Announcement IE. - RTMPMoveMemory(&ChannelSwitch, &Elem->Msg[LENGTH_802_11+4], sizeof (CHA_SWITCH_ANNOUNCE_IE)); - - // 802.11n D3.03 adds secondary channel offset element in the end. - if (Elem->MsgLen == (LENGTH_802_11 + 2 + sizeof (CHA_SWITCH_ANNOUNCE_IE) + sizeof (SEC_CHA_OFFSET_IE))) - { - RTMPMoveMemory(&Secondary, &Elem->Msg[LENGTH_802_11+9], sizeof (SEC_CHA_OFFSET_IE)); - } - else - { - Secondary.SecondaryChannelOffset = 0; - } - - if ((Elem->Msg[LENGTH_802_11+2] == IE_CHANNEL_SWITCH_ANNOUNCEMENT) && (Elem->Msg[LENGTH_802_11+3] == 3)) - { - ChannelSwitchAction(pAd, Elem->Wcid, ChannelSwitch.NewChannel, Secondary.SecondaryChannelOffset); - } -#endif // DOT11N_DRAFT3 // } PeerChSwAnnAction(pAd, Elem); break; |