Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "As usual, this is where the bulk of our changes end up landing each
  merge window.

  The individual updates are too many to enumerate, many many platforms
  have seen additions of device descriptions such that they are
  functionally more complete (in fact, this is often the bulk of updates
  we see).

  Instead I've mostly focused on highlighting the new platforms below as
  they are introduced. Sometimes the introduction is of mostly a
  fragment, that later gets filled in on later releases, and in some
  cases it's near-complete platform support. The latter is more common
  for derivative platforms that already has similar support in-tree.

  Two SoCs are slight outliers from the usual range of additions.
  Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping
  in the Lychee Pi Nano platform. At the other end is NXP Layerscape
  LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O
  aimed at infrastructure/networking.

  TI updates stick out in the diff stats too, in particular because they
  have moved the description of their L4 on-chip interconnect to
  devicetree, which opens up for removal of even more of their
  platform-specific 'hwmod' description tables over the next few
  releases.

  SoCs:
   - Qualcomm QCS404 (4x Cortex-A53)
   - Allwinner T3 (rebranded R40) and f1c100s (armv5)
   - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
   - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)

  New platforms:
   - Rockchip: Gru Scarlet (RK3188 Tablet)
   - Amlogic: Phicomm N1 (S905D), Libretech S805-AC
   - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
   - Qualcomm: QCS404 base platform and EVB
   - Qualcomm: Remove of Arrow SD600
   - PXA: First PXA3xx DT board: Raumfeld
   - Aspeed: Facebook Backpack-CMM BMC
   - Renesas iWave G20D-Q7 (RZ/G1N)
   - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
   - Allwinner Emlid Neutis N5, Mapleboard MP130
   - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
   - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
   - VF610: Liebherr's BK4 device, ZII SCU4 AIB board
   - i.MX7D PICO Hobbit baseboard
   - i.MX7ULP EVK board
   - NXP LX2160AQDS and LX2160ARDB boards

  Other:
   - Coresight binding updates across the board
   - CPU cooling maps updates across the board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits)
  ARM: dts: suniv: Fix improper bindings include patch
  ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards
  arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node
  ARM: dts: suniv: Fix improper bindings include patch
  arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  arm64: dts: Remove unused properties from FSL QSPI driver nodes
  ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
  ARM: dts: Remove unused properties from FSL QSPI driver nodes
  arm64: dts: ti: k3-am654: Enable main domain McSPI0
  arm64: dts: ti: k3-am654: Add McSPI DT nodes
  arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
  arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
  arm64: dts: ti: k3-am65-main: Add ECAP PWM node
  arm64: dts: ti: k3-am654-base-board: Add I2C nodes
  arm64: dts: ti: am654-base-board: Add pinmux for main uart0
  arm64: dts: ti: k3-am65: Add pinctrl regions
  dt-bindings: pinctrl: k3: Introduce pinmux definitions
  ARM: dts: exynos: Specify I2S assigned clocks in proper node
  ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
  ...

1 files changed, 144 insertions, 5 deletions

diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 766bbb8495b6..ee03e0846740 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -117,6 +117,60 @@
 				reg-names = "mux status", "mux mask";
 				mrvl,intc-nr-irqs = <2>;
 			};
+
+			usb_otg_phy0: usb-otg-phy@d4207000 {
+				compatible = "marvell,mmp2-usb-phy";
+				reg = <0xd4207000 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb_otg0: usb-otg@d4208000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xd4208000 0x200>;
+				interrupts = <44>;
+				clocks = <&soc_clocks MMP2_CLK_USB>;
+				clock-names = "USBCLK";
+				phys = <&usb_otg_phy0>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			mmc1: mmc@d4280000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH0>;
+				clock-names = "io";
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			mmc2: mmc@d4280800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH1>;
+				clock-names = "io";
+				interrupts = <52>;
+				status = "disabled";
+			};
+
+			mmc3: mmc@d4281000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH2>;
+				clock-names = "io";
+				interrupts = <53>;
+				status = "disabled";
+			};
+
+			mmc4: mmc@d4281800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH3>;
+				clock-names = "io";
+				interrupts = <54>;
+				status = "disabled";
+			};
 		};
 
 		apb@d4000000 {	/* APB */
@@ -130,6 +184,7 @@
 				compatible = "mrvl,mmp-timer";
 				reg = <0xd4014000 0x100>;
 				interrupts = <13>;
+				clocks = <&soc_clocks MMP2_CLK_TIMER>;
 			};
 
 			uart1: uart@d4030000 {
@@ -168,7 +223,7 @@
 				status = "disabled";
 			};
 
-			gpio@d4019000 {
+			gpio: gpio@d4019000 {
 				compatible = "marvell,mmp2-gpio";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -180,7 +235,7 @@
 				clocks = <&soc_clocks MMP2_CLK_GPIO>;
 				resets = <&soc_clocks MMP2_CLK_GPIO>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 				ranges;
 
 				gcb0: gpio@d4019000 {
@@ -220,12 +275,64 @@
 				status = "disabled";
 			};
 
-			twsi2: i2c@d4025000 {
+			twsi2: i2c@d4031000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
+				reg = <0xd4031000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <0>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
 				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi3: i2c@d4032000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4032000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <1>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
+				resets = <&soc_clocks MMP2_CLK_TWSI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi4: i2c@d4033000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <2>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
+				resets = <&soc_clocks MMP2_CLK_TWSI3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			twsi5: i2c@d4033800 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033800 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <3>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
+				resets = <&soc_clocks MMP2_CLK_TWSI4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi6: i2c@d4034000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4034000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <4>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
+				resets = <&soc_clocks MMP2_CLK_TWSI5>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -239,6 +346,38 @@
 				resets = <&soc_clocks MMP2_CLK_RTC>;
 				status = "disabled";
 			};
+
+			ssp1: ssp@d4035000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4035000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP0>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			ssp2: ssp@d4036000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4036000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP1>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			ssp3: ssp@d4037000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4037000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP2>;
+				interrupts = <20>;
+				status = "disabled";
+			};
+
+			ssp4: ssp@d4039000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4039000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP3>;
+				interrupts = <21>;
+				status = "disabled";
+			};
 		};
 
 		soc_clocks: clocks{