aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe/ixgbe_type.h
AgeCommit message (Collapse)Author
2010-04-27ixgbe: Power down PHY during driver resetsPeter Waskiewicz
The PHY laser is still on during driver init. It's allowing garbage to hit our FIFO, which eventually can cause the entire device to die. Power down the laser while setting up the device, and re-enable the laser before getting link. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26ixgbe: filter FIP frames into the FCoE offload queuesChris Leech
During FCF solicitation, the switch is supposed to pad the solicited advertisement out to the endpoints specified maximum FCoE frame size. That means that we need to receive FIP frames that are larger than the standard MTU. To make sure the receive queue is configured correctly, we should be filtering FIP traffic into the FCoE queues. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18ixgbe: Fix 82599 multispeed fiber link issues due to Tx laser flappingMallikarjuna R Chilakala
Fix 82599 link issues during driver load and unload test using multi-speed 10G & 1G fiber modules. When connected back to back sometime 82599 multispeed fiber modules would link at 1G speed instead of 10G highest speed, due to a race condition in autotry process involving Tx laser flapping. Move autotry autoneg-37 tx laser flapping process from multispeed module init setup to driver unload. This will alert the link partner to restart its autotry process when it tries to establish the link with the link partner Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10ixgbe: Add support for the new ethtool n-tuple programming interfacePeter Waskiewicz
This patch adds n-tuple filter programming to 82599. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-25net: use helpers to access uc list V2Jiri Pirko
This patch introduces three macros to work with uc list from net drivers. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-01-13ixgbe: update copyright datesShannon Nelson
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-10ixgbe: Add SR-IOV register, structure and bit definesGreg Rose
This patch adds register definitions, bit definitions and structures used by the driver to support SR-IOV features of the 82599 controller. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-15ixgbe: Fix 82598 premature copper PHY link indicatationMallikarjuna R Chilakala
Modified patch with Dave's comments to replace mdelay with proper msleep. Fix 82598 copper link issue, where the phy prematurely indicates link before it is ready to process packets. The new function looks for phy link and indicates that, when it is available. If phy is not ready within few seconds of MAC indicating link, the function will return failure which translates to link down indication. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-08ixgbe: add support for 82599 KR device 0x1517Don Skidmore
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ixgbe: Add support for 82599 alternative WWNN/WWPN prefixYi Zou
The 82599 EEPROM supports alternative prefix for World Wide Node Name (WWNN) and World Wide Port Name (WWPN). The prefixes can be used together with the SAN MAC address to form the WWNN and WWPN, which can be used by upper layer drivers such as Fiber Channel over Ethernet (FCoE). Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08ixgbe: Fix KR to KX fail over for Mezzanine cardsDon Skidmore
This patch allows the recently added backplane device IDs that support KR to fail over to KX during link setup. This is accomplished by the new MAC link setup function ixgbe_setup_mac_link_smartspeed(). Comments were also updated to better document the reason for the delays chosen for KX, KX4, BX, BX4 and KR connections. Signed-off-by: Don Skidmore <don.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-08ixgbe: add support for 82599 based Express Module X520-P2Don Skidmore
This patch will add the device ID for the 82599-based Ethernet Express Module X520-P2 SFI card. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04ixgbe: add support for 82599 based X520 10G Dual KX4 Mezz cardDon Skidmore
This patch adds device support for the 82599 based X520 10GbE Dual Port KX4 Mezzanine card. Signed-off-by: Don Skidmore<donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04ixgbe: add support for 82599 Combined BackplaneDon Skidmore
This patch will add support for the 82599 Dual port Backplane device (0x10f8). This device has the ability to link in serial (KR) and parallel (KX4/KX) modes, depending on what the switch capabilities are in the blade chassis. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Fix backplane flow control autonegPeter P Waskiewicz Jr
Backplane flow control autonegotiation is currently broken for ixgbe devices. This patch fixes the flow control issues with clause 37 autoneg. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14ixgbe: Create separate media type for CX4 adaptersPeter P Waskiewicz Jr
Currently the media type detection for CX4 adapters lumps them into a type of fiber. This causes some strange fallout when firmware verification is done on the NIC, and certain fiber NIC rules get enforced incorrectly. This patch introduces a new media type for CX4, and puts both 82598 and 82599 CX4 adapters into this bucket. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14ixgbe: Add support for 82599-based CX4 adaptersPeter P Waskiewicz Jr
This patch adds support for CX4 adapters based on 82599. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01ixgbe: refactor link setup codeMallikarjuna R Chilakala
Link code cleanup: a number of redundant functions and MAC variables are cleaned up, with some functions being consolidated into a single-purpose code path. Removed following deprecated link functions and mac variables * ixgbe_setup_copper_link_speed_82598 * ixgbe_setup_mac_link_speed_multispeed_fiber * ixgbe_setup_mac_link_speed_82599 * mac.autoneg, mac.autoneg_succeeded, phy.autoneg_wait_to_complete Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-03ixgbe: Patch to modify 82598 PCIe completion timeout valuesMallikarjuna R Chilakala
The default completion timeout values for 82598 should be in the range of 50us to 50ms, however the hardware default for these parts is 500us to 1ms which is less than the 10ms recommended by the pcie spec. To address this we need to increase the value to either 10ms to 250ms for capability version 1 configuration, or 16ms to 55ms for version 2. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-17ixgbe: Add device support for a new copper 82598 devicePeter P Waskiewicz Jr
This adds support for a new copper device for 82598, device id 0x150b. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-17ixgbe: Remove legacy descriptor supportPeter P Waskiewicz Jr
The ethtool offline test is the only consumer of the legacy descriptors. Update that path to only use advanced descriptors, and remove all support for legacy descriptors. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Add FW detection and warning for 82599 SFP+ adaptersPeter P Waskiewicz Jr
82599 has a FW running that helps manage the internal SFI PHY. There are also a number of pre-production samples of these SFI-based devices in the field. This patch adds a check to look for the firmware running on all SFP+ based adapters, and displays a warning to the system log if a pre-production adapter is identified. The driver will continue loading though, with no functional degradation. Also remove an old function prototype from ixgbe_82599.c that isn't being used. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Add hardware defines for Flow Director for 82599Peter P Waskiewicz Jr
Flow Director is a Rx filter mechanism designed to match Rx flows back to the same CPU that the flow's Tx occurred from. This patch adds the first piece, the defines for the hardware registers, to enable this feature in 82599 hardware. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Fix 82599 adapter link flickering issuesMallikarjuna R Chilakala
Fix autoneg restart issues in flow control path which might create endless link flickering due to known timing issues with 82599 adapters. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakakla@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-07ixgbe: Harden the 82599 multispeed fiber autotry mechanismPeter P Waskiewicz Jr
82599 supports multispeed fiber optical modules (10Gbps/1Gbps). Some scenarios can cause the autotry mechanism to not negotiate link properly. What needs to happen is the driver must flap the Tx laser to induce an Rx Loss of Signal on the link partner. This will restart the autotry mechanism to get link into a known state. The software definable pin (SDP) 3 on the 0x10fb NIC is wired to cause a Tx LOS event, which triggers the Rx LOS we require. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: convert unicast addr listJiri Pirko
This patch converts unicast address list to standard list_head using previously introduced struct netdev_hw_addr. It also relaxes the locking. Original spinlock (still used for multicast addresses) is not needed and is no longer used for a protection of this list. All reading and writing takes place under rtnl (with no changes). I also removed a possibility to specify the length of the address while adding or deleting unicast address. It's always dev->addr_len. The convertion touched especially e1000 and ixgbe codes when the change is not so trivial. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 13 +-- drivers/net/e1000/e1000_main.c | 24 +++-- drivers/net/ixgbe/ixgbe_common.c | 14 ++-- drivers/net/ixgbe/ixgbe_common.h | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/ixgbe/ixgbe_type.h | 4 +- drivers/net/macvlan.c | 11 +- drivers/net/mv643xx_eth.c | 11 +- drivers/net/niu.c | 7 +- drivers/net/virtio_net.c | 7 +- drivers/s390/net/qeth_l2_main.c | 6 +- drivers/scsi/fcoe/fcoe.c | 16 ++-- include/linux/netdevice.h | 18 ++-- net/8021q/vlan.c | 4 +- net/8021q/vlan_dev.c | 10 +- net/core/dev.c | 195 +++++++++++++++++++++++++++----------- net/dsa/slave.c | 10 +- net/packet/af_packet.c | 4 +- 18 files changed, 227 insertions(+), 137 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-26ixgbe: Remove device ID 0x10d8Peter P Waskiewicz Jr
Device ID 0x10d8 is the default silicon device ID for 82599. However, the device will not be functional without an EEPROM, so we want to prevent the driver from loading on the device. Otherwise, the driver will load, but no PHY setup or PCIe setup will occur, causing the device to be unusable. To prevent users from encountering this, just remove the device ID. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18ixgbe: Add generic XAUI support to 82599Peter P Waskiewicz Jr
This patch adds the generic XAUI device support for 82599 controllers. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17ixgbe: Add FCoE Storage MAC Address supportPJ Waskiewicz
This patch implements the Storage Address entrypoint from the net device. It will read the SAN MAC addresses from the EEPROM of the 82599 hardware, and make them available to the FCoE stack through the net device. Also, add/del the SAN MAC address to the netdev dev_addr_list via the kernel api dev_addr_add()/dev_addr_del() when there is a valid SAN MAC supported by the HW. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17ixgbe: Add FCoE related statistics to 82599Yi Zou
This adds FCoE related statistics to 82599, including number Rx-ed and Tx-ed FCoE packets, number of Rx-ed and Tx-ed FCoE packets in dwords, number of bad Fiber Channel CRCs detected in FCoE packets, and number of FCoE packets dropped on the Rx side. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17ixgbe: Implement FCoE Tx side offload features in base driver of 82599Yi Zou
This patch implements the FCoE Tx side offload features in ixgbe_main.c to 82599 using the Tx offload infrastructure code added in the previous patch. This is achieved by the calling the FCoE Sequence Offload (FSO) function ixgbe_fso() on the transmit path of ixgbe. This patch also includes an EEPROM check to make sure the NIC we're loading on is an offload-enabled SKU. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17ixgbe: Add FCoE feature register defines to 82599Yi Zou
This adds FCoE related register defines to 82599. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07ixgbe: Enable L2 header split in 82599Yi Zou
This enables L2 header split when packet split is enabled for 82599. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-29ixgbe: Use generic MDIO definitions and functionsBen Hutchings
Compile-tested only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28ixgbe: enable HW RSC for 82599Alexander Duyck
This patch enables hardware receive side coalescing for 82599 hardware. 82599 can merge multiple frames from the same TCP/IP flow into a single structure that can span one ore more descriptors. The accumulated data is arranged similar to how jumbo frames are arranged with the exception that other packets can be interlaced inbetween. To overcome this issue a next pointer is included in the written back descriptor which indicates the next descriptor in the writeback sequence. This feature sets the NETIF_F_LRO flag and clearing it via the ethtool set flags operation will also disable hardware RSC. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27ixgbe: Disallow SFP 1G modules in the SFP+ cages for 82598 and 82599Waskiewicz Jr, Peter P
82598 and 82599 do not support SFP 1G modules. Instead of allowing the driver to load, but never get link, rejecting the module and displaying a useful message is more preferrable. The framework for displaying the failure message already exists, now we just need to detect and reject the SFP modules. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ixgbe: Update get_physical_layer() calls, plus a version bumpPeter P Waskiewicz Jr
Not all physical connection types are being correctly identified. This fixes that issue, and cleans up the logic to make it more maintainable. Also clean up the code for device capabilities from the EEPROM to support multiple SKUs of the same hardware. Bump the version to reflect all the updates since the 82599 merge. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ixgbe: Remove unnecessary PHY reset, properly identify multispeed fiber modulesPJ Waskiewicz
This patch does two things: 1) On 82599, the PHY is emedded in the MAC. On 82598, the SFP+ NIC has an external PHY. The reset in the SFP+ setup patch for 82598 is unnecessary on 82599, and adds extra dead time to device initialization. This removes that PHY reset for 82599 only. 2) On 82599, the SFP+ modules are multispeed fiber modules (10G/1G). We need to make sure to identify them properly for the remaining init sections to properly set them up. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ixgbe: Move PHY ops initialization to centralize bus accessesPJ Waskiewicz
When PHY operations are determined, the PHY must be identified. This identification causes bus access, and should be contained within its own routines. This also helps the 82599 PHY init paths for both SFP+ and KX/KX4 devices to be easier to maintain. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ixgbe: add define to support 82599 64 IVAR registersDon Skidmore
82599 supports 64 IVAR registers this patch adds a define to allow us to access them. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ixgbe: add support for addition VT_CTL definesDon Skidmore
These defines allow for definition of target pool for packets that pass L2 filtering but didn't pass any of the pool filters. They are needed to reset the default pool. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ixgbe: fix IXGBE_MTQC valuesDon Skidmore
IXGBE_MTQC_64VF was wrong and 32VF not defined at all. This patch corrects that. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02ixgbe: fix ethtool -A|a behaviorDon Skidmore
We were basicly ignoring ethtool users request for FC autoneg and replying to queries with a "best guess". This patch enables the driver to store if we want to enable/disable autoneg FC and do the correct behavior. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26ixgbe: Allow Priority Flow Control settings to survive a device resetPJ Waskiewicz
When changing DCB parameters, ixgbe needs to have the MAC reset. The way the flow control code is setup today, PFC will be disabled on a reset. This patch adds a new flow control type for PFC, and then has the netlink layer take care of toggling which type of flow control to enable. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14ixgbe: Fix interrupt configuration for 82599Jesse Brandeburg
The interrupt models using EITR have changed in 82599. The way the register is laid out, the change is transparent to some of the existing code. However, some of it isn't. This patch fixes all the cases where EITR handling is different than 82598. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01ixgbe: Add hardware specific initialization code for 82599 devicesPJ Waskiewicz
This patch adds the hardware initialization code specific to 82599. This is similar to the 82598 hardware initialization code. It also includes all changes to the existing hardware init code to support 82599. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-06ixgbe: Update flow control state machine in link setupPeter P Waskiewicz Jr
The flow control handling is overly complicated and difficult to maintain. This patch cleans up the flow control handling and makes it much more explicit. It also adds 1G flow control autonegotiation, for 1G copper links, 1G KX links, and 1G fiber links. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-05ixgbe: Update link setup code to better support autonegotiation of speedPeter P Waskiewicz Jr
The current code has some flaws in it when performing autonegotiation, especially on KX/KX4 links. This patch updates the code to better handle the autonegotiation states on link setup. The patch also removes a redundant link configuration call on driver load, and moves link configuration to the ->open() path. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-20 08:33:27 +0000