aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/atmel/at91sam9x5ek/at91sam9x5ek.c10
-rw-r--r--board/htkw/mcx/mcx.c48
-rw-r--r--board/htkw/mcx/mcx.h30
-rw-r--r--board/samsung/origen/lowlevel_init.S37
-rw-r--r--board/samsung/origen/origen_setup.h74
-rw-r--r--board/sx1/Makefile45
-rw-r--r--board/sx1/config.mk19
-rw-r--r--board/sx1/lowlevel_init.S397
-rw-r--r--board/sx1/sx1.c123
-rw-r--r--board/teejet/mt_ventoux/mt_ventoux.c8
-rw-r--r--board/ti/am335x/Makefile1
-rw-r--r--board/ti/am335x/board.c376
-rw-r--r--board/ti/am335x/board.h49
-rw-r--r--board/ti/am335x/mux.c250
14 files changed, 610 insertions, 857 deletions
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index 06028aa01..edb088680 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -31,6 +31,7 @@
#include <asm/arch/clk.h>
#include <lcd.h>
#include <atmel_hlcdc.h>
+#include <atmel_mci.h>
#ifdef CONFIG_MACB
#include <net.h>
#endif
@@ -258,6 +259,15 @@ void spi_cs_deactivate(struct spi_slave *slave)
}
#endif /* CONFIG_ATMEL_SPI */
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+ at91_mci_hw_init();
+
+ return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
+}
+#endif
+
int board_early_init_f(void)
{
at91_seriald_hw_init();
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 7c9d34ab8..9fe6408ec 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -27,6 +27,8 @@
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/omap_gpio.h>
+#include <asm/arch/dss.h>
+#include <asm/arch/clocks.h>
#include "errno.h"
#include <i2c.h>
#ifdef CONFIG_USB_EHCI
@@ -37,12 +39,16 @@
DECLARE_GLOBAL_DATA_PTR;
-#define HOT_WATER_BUTTON 38
+#define HOT_WATER_BUTTON 42
+#define LCD_OUTPUT 55
+
+/* Address of the framebuffer in RAM. */
+#define FB_START_ADDRESS 0x88000000
#ifdef CONFIG_USB_EHCI
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
};
@@ -67,6 +73,8 @@ int board_init(void)
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+ gpio_direction_output(LCD_OUTPUT, 0);
+
return 0;
}
@@ -87,6 +95,7 @@ int board_late_init(void)
return 0;
setenv("bootcmd", "run swupdate");
+
return 0;
}
#endif
@@ -109,15 +118,34 @@ int board_mmc_init(bd_t *bis)
}
#endif
-#ifdef CONFIG_USB_EHCI_OMAP
-#define USB_HOST_PWR_EN 132
-int board_usb_init(void)
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+
+static struct panel_config lcd_cfg = {
+ .timing_h = PANEL_TIMING_H(40, 40, 48),
+ .timing_v = PANEL_TIMING_V(29, 13, 3),
+ .pol_freq = 0x00003000, /* Pol Freq */
+ .divisor = 0x0001000E,
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = 0,
+ .lcd_size = PANEL_LCD_SIZE(800, 480),
+};
+
+int board_video_init(void)
{
- if (gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN") < 0) {
- puts("Failed to get USB_HOST_PWR_EN pin\n");
- return -ENODEV;
- }
- gpio_direction_output(USB_HOST_PWR_EN, 1);
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ void *fb;
+
+ fb = (void *)FB_START_ADDRESS;
+
+ lcd_cfg.frame_buffer = fb;
+
+ setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
+ setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
+
+ omap3_dss_panel_config(&lcd_cfg);
+ omap3_dss_enable();
return 0;
}
diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h
index 867cc9e88..0d4c64220 100644
--- a/board/htkw/mcx/mcx.h
+++ b/board/htkw/mcx/mcx.h
@@ -96,7 +96,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(GPMC_A7), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(GPMC_A8), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(GPMC_A9), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | DIS | M4)) \
+ MUX_VAL(CP(GPMC_A10), (IEN | PTU | EN | M4)) \
/* GPIO_43 LCD buffer enable */ \
MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
@@ -143,28 +143,28 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA0), (IEN | PTU | EN | M4))\
- MUX_VAL(CP(DSS_DATA1), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA2), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA8), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA9), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA16), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA17), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA18), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
/* CAMERA */\
@@ -264,6 +264,8 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4)) \
+ /* GPIO_170 Touchscreen ISR */\
/* McSPI */\
MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
@@ -313,11 +315,11 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
/* HECC */\
- MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M4)) \
+ MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M0)) \
/* HSUSB */\
MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(HSUSB0_STP), (IEN | PTU | DIS | M0)) \
MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
index 928320120..9daa0da61 100644
--- a/board/samsung/origen/lowlevel_init.S
+++ b/board/samsung/origen/lowlevel_init.S
@@ -158,7 +158,22 @@ system_clock_init:
ldr r2, =CLK_SRC_PERIL0_OFFSET
str r1, [r0, r2]
- /* FIMD0 */
+ /* CAM , FIMC 0-3 */
+ ldr r1, =CLK_SRC_CAM_VAL
+ ldr r2, =CLK_SRC_CAM_OFFSET
+ str r1, [r0, r2]
+
+ /* MFC */
+ ldr r1, =CLK_SRC_MFC_VAL
+ ldr r2, =CLK_SRC_MFC_OFFSET
+ str r1, [r0, r2]
+
+ /* G3D */
+ ldr r1, =CLK_SRC_G3D_VAL
+ ldr r2, =CLK_SRC_G3D_OFFSET
+ str r1, [r0, r2]
+
+ /* LCD0 */
ldr r1, =CLK_SRC_LCD0_VAL
ldr r2, =CLK_SRC_LCD0_OFFSET
str r1, [r0, r2]
@@ -223,6 +238,26 @@ system_clock_init:
ldr r2, =CLK_DIV_PERIL0_OFFSET
str r1, [r0, r2]
+ /* CAM, FIMC 0-3: CAM Clock Divisors */
+ ldr r1, =CLK_DIV_CAM_VAL
+ ldr r2, =CLK_DIV_CAM_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_MFC: MFC Clock Divisors */
+ ldr r1, =CLK_DIV_MFC_VAL
+ ldr r2, =CLK_DIV_MFC_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_G3D: G3D Clock Divisors */
+ ldr r1, =CLK_DIV_G3D_VAL
+ ldr r2, =CLK_DIV_G3D_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_LCD0: LCD0 Clock Divisors */
+ ldr r1, =CLK_DIV_LCD0_VAL
+ ldr r2, =CLK_DIV_LCD0_OFFSET
+ str r1, [r0, r2]
+
/* Set PLL locktime */
ldr r1, =PLL_LOCKTIME
ldr r2, =APLL_LOCK_OFFSET
diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h
index 94cccca52..930b94850 100644
--- a/board/samsung/origen/origen_setup.h
+++ b/board/samsung/origen/origen_setup.h
@@ -53,7 +53,18 @@
#define CLK_DIV_FSYS2_OFFSET 0xC548
#define CLK_DIV_FSYS3_OFFSET 0xC54C
+#define CLK_SRC_CAM_OFFSET 0xC220
+#define CLK_SRC_TV_OFFSET 0xC224
+#define CLK_SRC_MFC_OFFSET 0xC228
+#define CLK_SRC_G3D_OFFSET 0xC22C
+#define CLK_SRC_LCD0_OFFSET 0xC234
#define CLK_SRC_PERIL0_OFFSET 0xC250
+
+#define CLK_DIV_CAM_OFFSET 0xC520
+#define CLK_DIV_TV_OFFSET 0xC524
+#define CLK_DIV_MFC_OFFSET 0xC528
+#define CLK_DIV_G3D_OFFSET 0xC52C
+#define CLK_DIV_LCD0_OFFSET 0xC534
#define CLK_DIV_PERIL0_OFFSET 0xC550
#define CLK_SRC_LCD0_OFFSET 0xC234
@@ -353,6 +364,65 @@
| (UART1_RATIO << 4) \
| (UART0_RATIO << 0))
+/* Clock Source CAM/FIMC */
+/* CLK_SRC_CAM */
+#define CAM0_SEL_XUSBXTI 1
+#define CAM1_SEL_XUSBXTI 1
+#define CSIS0_SEL_XUSBXTI 1
+#define CSIS1_SEL_XUSBXTI 1
+
+#define FIMC_SEL_SCLKMPLL 6
+#define FIMC0_LCLK_SEL FIMC_SEL_SCLKMPLL
+#define FIMC1_LCLK_SEL FIMC_SEL_SCLKMPLL
+#define FIMC2_LCLK_SEL FIMC_SEL_SCLKMPLL
+#define FIMC3_LCLK_SEL FIMC_SEL_SCLKMPLL
+
+#define CLK_SRC_CAM_VAL ((CSIS1_SEL_XUSBXTI << 28) \
+ | (CSIS0_SEL_XUSBXTI << 24) \
+ | (CAM1_SEL_XUSBXTI << 20) \
+ | (CAM0_SEL_XUSBXTI << 16) \
+ | (FIMC3_LCLK_SEL << 12) \
+ | (FIMC2_LCLK_SEL << 8) \
+ | (FIMC1_LCLK_SEL << 4) \
+ | (FIMC0_LCLK_SEL << 0))
+
+/* SCLK CAM */
+/* CLK_DIV_CAM */
+#define FIMC0_LCLK_RATIO 4
+#define FIMC1_LCLK_RATIO 4
+#define FIMC2_LCLK_RATIO 4
+#define FIMC3_LCLK_RATIO 4
+#define CLK_DIV_CAM_VAL ((FIMC3_LCLK_RATIO << 12) \
+ | (FIMC2_LCLK_RATIO << 8) \
+ | (FIMC1_LCLK_RATIO << 4) \
+ | (FIMC0_LCLK_RATIO << 0))
+
+/* SCLK MFC */
+/* CLK_SRC_MFC */
+#define MFC_SEL_MPLL 0
+#define MOUTMFC_0 0
+#define MFC_SEL MOUTMFC_0
+#define MFC_0_SEL MFC_SEL_MPLL
+#define CLK_SRC_MFC_VAL ((MFC_SEL << 8) | (MFC_0_SEL))
+
+
+/* CLK_DIV_MFC */
+#define MFC_RATIO 3
+#define CLK_DIV_MFC_VAL (MFC_RATIO)
+
+/* SCLK G3D */
+/* CLK_SRC_G3D */
+#define G3D_SEL_MPLL 0
+#define MOUTG3D_0 0
+#define G3D_SEL MOUTG3D_0
+#define G3D_0_SEL G3D_SEL_MPLL
+#define CLK_SRC_G3D_VAL ((G3D_SEL << 8) | (G3D_0_SEL))
+
+/* CLK_DIV_G3D */
+#define G3D_RATIO 1
+#define CLK_DIV_G3D_VAL (G3D_RATIO)
+
+/* SCLK LCD0 */
/* CLK_SRC_LCD0 */
#define FIMD_SEL_SCLKMPLL 6
#define MDNIE0_SEL_XUSBXTI 1
@@ -363,6 +433,10 @@
| (MDNIE0_SEL_XUSBXTI << 4) \
| (FIMD_SEL_SCLKMPLL << 0))
+/* CLK_DIV_LCD0 */
+#define FIMD0_RATIO 4
+#define CLK_DIV_LCD0_VAL (FIMD0_RATIO)
+
/* Required period to generate a stable clock output */
/* PLL_LOCK_TIME */
#define PLL_LOCKTIME 0x1C20
diff --git a/board/sx1/Makefile b/board/sx1/Makefile
deleted file mode 100644
index 292459f25..000000000
--- a/board/sx1/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2004-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := sx1.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sx1/config.mk b/board/sx1/config.mk
deleted file mode 100644
index 441bea2a0..000000000
--- a/board/sx1/config.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
-#
-# SX1 board with OMAP1510 (ARM925T) cpu
-# see http://www.ti.com/ for more information on Texas Insturments
-#
-# SX1 has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
diff --git a/board/sx1/lowlevel_init.S b/board/sx1/lowlevel_init.S
deleted file mode 100644
index c1a811aa8..000000000
--- a/board/sx1/lowlevel_init.S
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- *
- * -- Some bits of code used from rrload's head_OMAP1510.s --
- * Copyright (C) 2002 RidgeRun, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP1510)
-#include <./configs/omap1510.h>
-#endif
-
-#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
-
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-
- /*
- * Configure 1510 pins functions to match our board.
- */
- ldr r0, REG_PULL_DWN_CTRL_0
- ldr r1, VAL_PULL_DWN_CTRL_0
- str r1, [r0]
- ldr r0, REG_PULL_DWN_CTRL_1
- ldr r1, VAL_PULL_DWN_CTRL_1
- str r1, [r0]
- ldr r0, REG_PULL_DWN_CTRL_2
- ldr r1, VAL_PULL_DWN_CTRL_2
- str r1, [r0]
- ldr r0, REG_PULL_DWN_CTRL_3
- ldr r1, VAL_PULL_DWN_CTRL_3
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_4
- ldr r1, VAL_FUNC_MUX_CTRL_4
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_5
- ldr r1, VAL_FUNC_MUX_CTRL_5
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_6
- ldr r1, VAL_FUNC_MUX_CTRL_6
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_7
- ldr r1, VAL_FUNC_MUX_CTRL_7
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_8
- ldr r1, VAL_FUNC_MUX_CTRL_8
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_9
- ldr r1, VAL_FUNC_MUX_CTRL_9
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_A
- ldr r1, VAL_FUNC_MUX_CTRL_A
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_B
- ldr r1, VAL_FUNC_MUX_CTRL_B
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_C
- ldr r1, VAL_FUNC_MUX_CTRL_C
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_D
- ldr r1, VAL_FUNC_MUX_CTRL_D
- str r1, [r0]
- ldr r0, REG_VOLTAGE_CTRL_0
- ldr r1, VAL_VOLTAGE_CTRL_0
- str r1, [r0]
- ldr r0, REG_TEST_DBG_CTRL_0
- ldr r1, VAL_TEST_DBG_CTRL_0
- str r1, [r0]
- ldr r0, REG_MOD_CONF_CTRL_0
- ldr r1, VAL_MOD_CONF_CTRL_0
- str r1, [r0]
-
- /* Move to 1510 mode */
- ldr r0, REG_COMP_MODE_CTRL_0
- ldr r1, VAL_COMP_MODE_CTRL_0
- str r1, [r0]
-
- /* Set up Traffic Ctlr*/
- ldr r0, REG_TC_IMIF_PRIO
- mov r1, #0x0
- str r1, [r0]
- ldr r0, REG_TC_EMIFS_PRIO
- str r1, [r0]
- ldr r0, REG_TC_EMIFF_PRIO
- str r1, [r0]
-
- ldr r0, REG_TC_EMIFS_CONFIG
- ldr r1, [r0]
- bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */
- bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */
- str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */
-
- ldr r0, _GPIO_PIN_CONTROL_REG
- mov r1,#0
- orr r1, r1, #0x0001 /* M_PCM_SYNC */
- orr r1, r1, #0x4000 /* IPC_ACTIVE */
- strh r1,[r0]
-
- ldr r0, _GPIO_DIR_CONTROL_REG
- mov r1,#0
- bic r1, r1, #0x0001 /* M_PCM_SYNC */
- bic r1, r1, #0x4000 /* IPC_ACTIVE */
- strh r1,[r0]
-
- ldr r0, _GPIO_DATA_OUTPUT_REG
- mov r1,#0
- bic r1, r1, #0x0001 /* M_PCM_SYNC */
- orr r1, r1, #0x4000 /* IPC_ACTIVE */
- strh r1,[r0]
-
- /* Setup some clock domains */
- ldr r1, =OMAP1510_CLKS
- ldr r0, REG_ARM_IDLECT2
- strh r1, [r0] /* CLKM, Clock domain control. */
-
- mov r1, #0x01 /* PER_EN bit */
- ldr r0, REG_ARM_RSTCT2
- strh r1, [r0] /* CLKM; Peripheral reset. */
-
- /* Set CLKM to Sync-Scalable */
- /* I supposidly need to enable the dsp clock before switching */
- mov r1, #0x1000
- ldr r0, REG_ARM_SYSST
- strh r1, [r0]
- mov r0, #0x400
-1:
- subs r0, r0, #0x1 /* wait for any bubbles to finish */
- bne 1b
-
- ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
- ldr r0, REG_ARM_CKCTL
- strh r1, [r0]
-
- /* setup DPLL 1 */
- ldr r1, VAL_DPLL1_CTL
- ldr r0, REG_DPLL1_CTL
- strh r1, [r0]
- ands r1, r1, #0x10 /* Check if PLL is enabled. */
- beq lock_end /* Do not look for lock if BYPASS selected */
-2:
- ldrh r1, [r0]
- ands r1, r1, #0x01 /* Check the LOCK bit. */
- beq 2b /* ...loop until bit goes hi. */
-lock_end:
-
- /* Set memory timings corresponding to the new clock speed */
-
- /* Check execution location to determine current execution location
- * and branch to appropriate initialization code.
- */
- mov r0, #0x10000000 /* Load physical SDRAM base. */
- mov r1, pc /* Get current execution location. */
- cmp r1, r0 /* Compare. */
- bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */
-
- /*
- * Delay for SDRAM initialization.
- */
- mov r3, #0x1800 /* value should be checked */
-3:
- subs r3, r3, #0x1 /* Decrement count */
- bne 3b
-
- /*
- * Set SDRAM control values. Disable refresh before MRS command.
- */
- ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */
- bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
- orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */
- orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */
- ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
- str r3, [r2] /* Store the passed value with AR disabled. */
-
- ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */
- ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */
- str r1, [r2] /* Store the passed value.*/
-
- ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
- str r0, [r2] /* Store the passed value. */
-
- /*
- * Delay for SDRAM initialization.
- */
- mov r3, #0x1800
-4:
- subs r3, r3, #1 /* Decrement count. */
- bne 4b
-
-skip_sdram:
-
- /* slow interface */
- ldr r1, VAL_TC_EMIFS_CS0_CONFIG
- ldr r0, REG_TC_EMIFS_CS0_CONFIG
- str r1, [r0] /* Chip Select 0 */
- ldr r1, VAL_TC_EMIFS_CS1_CONFIG
- ldr r0, REG_TC_EMIFS_CS1_CONFIG
- str r1, [r0] /* Chip Select 1 */
- ldr r1, VAL_TC_EMIFS_CS2_CONFIG
- ldr r0, REG_TC_EMIFS_CS2_CONFIG
- str r1, [r0] /* Chip Select 2 */
- ldr r1, VAL_TC_EMIFS_CS3_CONFIG
- ldr r0, REG_TC_EMIFS_CS3_CONFIG
- str r1, [r0] /* Chip Select 3 */
-
- /* back to arch calling code */
- mov pc, lr
-
-/* the literal pools origin */
- .ltorg
-
-/* OMAP configuration registers */
-REG_FUNC_MUX_CTRL_0: /* 32 bits */
- .word 0xfffe1000
-REG_FUNC_MUX_CTRL_1: /* 32 bits */
- .word 0xfffe1004
-REG_FUNC_MUX_CTRL_2: /* 32 bits */
- .word 0xfffe1008
-REG_COMP_MODE_CTRL_0: /* 32 bits */
- .word 0xfffe100c
-REG_FUNC_MUX_CTRL_3: /* 32 bits */
- .word 0xfffe1010
-REG_FUNC_MUX_CTRL_4: /* 32 bits */
- .word 0xfffe1014
-REG_FUNC_MUX_CTRL_5: /* 32 bits */
- .word 0xfffe1018
-REG_FUNC_MUX_CTRL_6: /* 32 bits */
- .word 0xfffe101c
-REG_FUNC_MUX_CTRL_7: /* 32 bits */
- .word 0xfffe1020
-REG_FUNC_MUX_CTRL_8: /* 32 bits */
- .word 0xfffe1024
-REG_FUNC_MUX_CTRL_9: /* 32 bits */
- .word 0xfffe1028
-REG_FUNC_MUX_CTRL_A: /* 32 bits */
- .word 0xfffe102C
-REG_FUNC_MUX_CTRL_B: /* 32 bits */
- .word 0xfffe1030
-REG_FUNC_MUX_CTRL_C: /* 32 bits */
- .word 0xfffe1034
-REG_FUNC_MUX_CTRL_D: /* 32 bits */
- .word 0xfffe1038
-REG_PULL_DWN_CTRL_0: /* 32 bits */
- .word 0xfffe1040
-REG_PULL_DWN_CTRL_1: /* 32 bits */
- .word 0xfffe1044
-REG_PULL_DWN_CTRL_2: /* 32 bits */
- .word 0xfffe1048
-REG_PULL_DWN_CTRL_3: /* 32 bits */
- .word 0xfffe104c
-REG_VOLTAGE_CTRL_0: /* 32 bits */
- .word 0xfffe1060
-REG_TEST_DBG_CTRL_0: /* 32 bits */
- .word 0xfffe1070
-REG_MOD_CONF_CTRL_0: /* 32 bits */
- .word 0xfffe1080
-REG_TC_IMIF_PRIO: /* 32 bits */
- .word 0xfffecc00
-REG_TC_EMIFS_PRIO: /* 32 bits */
- .word 0xfffecc04
-REG_TC_EMIFF_PRIO: /* 32 bits */
- .word 0xfffecc08
-REG_TC_EMIFS_CONFIG: /* 32 bits */
- .word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
- .word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
- .word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
- .word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
- .word 0xfffecc1c
-REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */
- .word 0xfffecc20
-REG_TC_EMIFF_MRS: /* 32 bits */
- .word 0xfffecc24
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL: /* 16 bits */
- .word 0xfffece00
-REG_ARM_IDLECT2: /* 16 bits */
- .word 0xfffece08
-REG_ARM_RSTCT2: /* 16 bits */
- .word 0xfffece14
-REG_ARM_SYSST: /* 16 bits */
- .word 0xfffece18
-/* DPLL control registers */
-REG_DPLL1_CTL: /* 16 bits */
- .word 0xfffecf00
-/* identification code register */
-REG_IDCODE: /* 32 bits */
- .word 0xfffed404
-
-/* SX1 specific */
-_GPIO_PIN_CONTROL_REG:
- .word GPIO_PIN_CONTROL_REG
-_GPIO_DIR_CONTROL_REG:
- .word GPIO_DIR_CONTROL_REG
-_GPIO_DATA_OUTPUT_REG:
- .word GPIO_DATA_OUTPUT_REG
-
-VAL_COMP_MODE_CTRL_0:
- .word 0x0000eaef
-VAL_FUNC_MUX_CTRL_4:
- .word 0x00000000
-VAL_FUNC_MUX_CTRL_5:
- .word 0x00000000
-VAL_FUNC_MUX_CTRL_6:
- .word 0x00000001
-VAL_FUNC_MUX_CTRL_7:
- .word 0x00001000
-VAL_FUNC_MUX_CTRL_8:
- .word 0x00001240 /*[Knoller] Value of Symbian Image Wing B2*/
-VAL_FUNC_MUX_CTRL_9:
- .word 0x00201008
-VAL_FUNC_MUX_CTRL_A:
- .word 0x00001000
-VAL_FUNC_MUX_CTRL_B:
- .word 0x00000000
-VAL_FUNC_MUX_CTRL_C:
- .word 0x09008001 /*[Knoller] Value of Symbian Image Wing B2*/
-VAL_FUNC_MUX_CTRL_D:
- .word 0x00000000
-VAL_PULL_DWN_CTRL_0:
- .word 0xfffeffff
-VAL_PULL_DWN_CTRL_1:
- .word 0xd1ffffec
-VAL_PULL_DWN_CTRL_2:
- .word 0xffa80c5b
-VAL_PULL_DWN_CTRL_3:
- .word 0xffffc0fe
-VAL_VOLTAGE_CTRL_0:
- .word 0x00000007
-VAL_TEST_DBG_CTRL_0:
- /* The OMAP5910 TRM says this register must be 0, but HelenConfRegs
- * says to write a 7. Don't know what the right thing is to do, so
- * I'm leaving it at 7 since that's what was already here.
- */
- .word 0x00000007
-VAL_MOD_CONF_CTRL_0:
- .word 0x0da20000 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_ARM_CKCTL:
- .word 0x010D
-
-VAL_DPLL1_CTL:
- .word 0x3A33 /*[Hertle] Value of Symbian Image*/
-
-VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
- .word 0x00001149
-
-VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
- .word 0x00004158
-
-VAL_TC_EMIFS_CS0_CONFIG:
- .word 0x00213090 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS1_CONFIG:
- .word 0x00215070 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS2_CONFIG:
- .word 0x00001139 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS3_CONFIG:
- .word 0x00001139 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFF_SDRAM_CONFIG:
- .word 0x0105f0b4 /*[Knoller] Value of Symbian Image Wing B2*/
-
-
-VAL_TC_EMIFF_MRS:
- .word 0x00000027 /*[Knoller] Value of Symbian Image Wing B2*/
diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c
deleted file mode 100644
index aaef76e71..000000000
--- a/board/sx1/sx1.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void flash__init (void);
-static void ether__init (void);
-
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* arch number of SX1 Board */
- gd->bd->bi_arch_number = MACH_TYPE_SX1;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
-/* kk - this speeds up your boot a quite a bit. However to make it
- * work, you need make sure your kernel startup flush bug is fixed.
- * ... rkw ...
- */
- icache_enable ();
-
- flash__init ();
- ether__init ();
- return 0;
-}
-
-
-int misc_init_r (void)
-{
- /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
- /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
-
- /* setup gpio direction to match board (no floats!) */
- /**gdir = 0xCFF9; */
- /**mdir = 0x103F; */
-
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-static void flash__init (void)
-{
-#define CS0_CHIP_SELECT_REG 0xfffecc10
-#define CS3_CHIP_SELECT_REG 0xfffecc1c
-#define EMIFS_GlB_Config_REG 0xfffecc0c
-
- unsigned int regval;
-
- regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
- regval = regval | 0x0001; /* Turn off write protection for flash devices. */
- if (regval & 0x0002) {
- regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
- /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
- /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
- /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
- }
- *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
-}
-
-
-/******************************
- Routine:
- Description:
-******************************/
-static void ether__init (void)
-{
-#define ETH_CONTROL_REG 0x0800000b
- /* take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete.
- */
- *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
- udelay (3);
-}
-
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index ecb9b6c41..9622a8128 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -45,6 +45,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define BUZZER 140
#define SPEAKER 141
+#define USB1_PWR 127
+#define USB2_PWR 149
#ifndef CONFIG_FPGA
#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
@@ -247,6 +249,12 @@ int board_init(void)
gpio_direction_output(BUZZER, 0);
gpio_direction_output(SPEAKER, 0);
+ /* Activate USB power */
+ gpio_request(USB1_PWR, "USB1_PWR");
+ gpio_request(USB2_PWR, "USB2_PWR");
+ gpio_direction_output(USB1_PWR, 1);
+ gpio_direction_output(USB2_PWR, 1);
+
return 0;
}
diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
index ca50eef61..67a87a1aa 100644
--- a/board/ti/am335x/Makefile
+++ b/board/ti/am335x/Makefile
@@ -22,6 +22,7 @@ ifdef CONFIG_SPL_BUILD
COBJS := mux.o
endif
+COBJS += board.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
new file mode 100644
index 000000000..5d279ecdb
--- /dev/null
+++ b/board/ti/am335x/board.c
@@ -0,0 +1,376 @@
+/*
+ * board.c
+ *
+ * Board functions for TI AM335X based boards
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+#ifdef CONFIG_SPL_BUILD
+static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+#endif
+
+/* MII mode defines */
+#define MII_MODE_ENABLE 0x0
+#define RGMII_MODE_ENABLE 0xA
+
+/* GPIO that controls power to DDR on EVM-SK */
+#define GPIO_DDR_VTT_EN 7
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+static struct am335x_baseboard_id __attribute__((section (".data"))) header;
+
+static inline int board_is_bone(void)
+{
+ return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
+}
+
+static inline int board_is_bone_lt(void)
+{
+ return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
+}
+
+static inline int board_is_evm_sk(void)
+{
+ return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
+}
+
+/*
+ * Read header information from EEPROM into global structure.
+ */
+static int read_eeprom(void)
+{
+ /* Check if baseboard eeprom is available */
+ if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
+ puts("Could not probe the EEPROM; something fundamentally "
+ "wrong on the I2C bus.\n");
+ return -ENODEV;
+ }
+
+ /* read the eeprom using i2c */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
+ sizeof(header))) {
+ puts("Could not read the EEPROM; something fundamentally"
+ " wrong on the I2C bus.\n");
+ return -EIO;
+ }
+
+ if (header.magic != 0xEE3355AA) {
+ /*
+ * read the eeprom using i2c again,
+ * but use only a 1 byte address
+ */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1,
+ (uchar *)&header, sizeof(header))) {
+ puts("Could not read the EEPROM; something "
+ "fundamentally wrong on the I2C bus.\n");
+ return -EIO;
+ }
+
+ if (header.magic != 0xEE3355AA) {
+ printf("Incorrect magic number (0x%x) in EEPROM\n",
+ header.magic);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+static void rtc32k_enable(void)
+{
+ struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE;
+
+ /*
+ * Unlock the RTC's registers. For more details please see the
+ * RTC_SS section of the TRM. In order to unlock we need to
+ * write these specific values (keys) in this order.
+ */
+ writel(0x83e70b13, &rtc->kick0r);
+ writel(0x95a4f1e0, &rtc->kick1r);
+
+ /* Enable the RTC 32K OSC by setting bits 3 and 6. */
+ writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+
+static const struct ddr_data ddr2_data = {
+ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
+ (MT47H128M16RT25E_RD_DQS<<20) |
+ (MT47H128M16RT25E_RD_DQS<<10) |
+ (MT47H128M16RT25E_RD_DQS<<0)),
+ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
+ (MT47H128M16RT25E_WR_DQS<<20) |
+ (MT47H128M16RT25E_WR_DQS<<10) |
+ (MT47H128M16RT25E_WR_DQS<<0)),
+ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
+ (MT47H128M16RT25E_PHY_WRLVL<<20) |
+ (MT47H128M16RT25E_PHY_WRLVL<<10) |
+ (MT47H128M16RT25E_PHY_WRLVL<<0)),
+ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
+ (MT47H128M16RT25E_PHY_GATELVL<<20) |
+ (MT47H128M16RT25E_PHY_GATELVL<<10) |
+ (MT47H128M16RT25E_PHY_GATELVL<<0)),
+ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
+ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<20) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<10) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<0)),
+ .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY,
+ .datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
+static const struct cmd_control ddr2_cmd_ctrl_data = {
+ .cmd0csratio = MT47H128M16RT25E_RATIO,
+ .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
+ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+ .cmd1csratio = MT47H128M16RT25E_RATIO,
+ .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
+ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+ .cmd2csratio = MT47H128M16RT25E_RATIO,
+ .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
+ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+};
+
+static const struct emif_regs ddr2_emif_reg_data = {
+ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
+ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
+ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
+ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
+ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
+ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
+};
+
+static const struct ddr_data ddr3_data = {
+ .datardsratio0 = MT41J128MJT125_RD_DQS,
+ .datawdsratio0 = MT41J128MJT125_WR_DQS,
+ .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
+ .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
+ .datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+ .cmd0csratio = MT41J128MJT125_RATIO,
+ .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+ .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+ .cmd1csratio = MT41J128MJT125_RATIO,
+ .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+ .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+ .cmd2csratio = MT41J128MJT125_RATIO,
+ .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+ .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+ .sdram_config = MT41J128MJT125_EMIF_SDCFG,
+ .ref_ctrl = MT41J128MJT125_EMIF_SDREF,
+ .sdram_tim1 = MT41J128MJT125_EMIF_TIM1,
+ .sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
+ .sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
+ .zq_config = MT41J128MJT125_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY,
+};
+#endif
+
+/*
+ * early system init of muxing and clocks.
+ */
+void s_init(void)
+{
+ /* WDT1 is already running when the bootloader gets control
+ * Disable it to avoid "random" resets
+ */
+ writel(0xAAAA, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+ writel(0x5555, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+
+#ifdef CONFIG_SPL_BUILD
+ /* Setup the PLLs and the clocks for the peripherals */
+ pll_init();
+
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+
+ /* UART softreset */
+ u32 regVal;
+
+ enable_uart0_pin_mux();
+
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_RESET;
+ writel(regVal, &uart_base->uartsyscfg);
+ while ((readl(&uart_base->uartsyssts) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+ ;
+
+ /* Disable smart idle */
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_SMART_IDLE_EN;
+ writel(regVal, &uart_base->uartsyscfg);
+
+ gd = &gdata;
+
+ preloader_console_init();
+
+ /* Initalize the board header */
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (read_eeprom() < 0)
+ puts("Could not get board ID.\n");
+
+ enable_board_pin_mux(&header);
+ if (board_is_evm_sk()) {
+ /*
+ * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
+ * This is safe enough to do on older revs.
+ */
+ gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
+ gpio_direction_output(GPIO_DDR_VTT_EN, 1);
+ }
+
+ if (board_is_evm_sk() || board_is_bone_lt())
+ config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data);
+ else
+ config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data,
+ &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data);
+#endif
+}
+
+/*
+ * Basic board specific setup. Pinmux has been handled already.
+ */
+int board_init(void)
+{
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (read_eeprom() < 0)
+ puts("Could not get board ID.\n");
+
+ gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_id = 0,
+ },
+ {
+ .slave_reg_ofs = 0x308,
+ .sliver_reg_ofs = 0xdc0,
+ .phy_id = 1,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = AM335X_CPSW_MDIO_BASE,
+ .cpsw_base = AM335X_CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ debug("<ethaddr> not set. Reading from E-fuse\n");
+ /* try reading mac address from efuse */
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ else
+ return -1;
+ }
+
+ if (board_is_bone() || board_is_bone_lt()) {
+ writel(MII_MODE_ENABLE, &cdev->miisel);
+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
+ PHY_INTERFACE_MODE_MII;
+ } else {
+ writel(RGMII_MODE_ENABLE, &cdev->miisel);
+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
+ PHY_INTERFACE_MODE_RGMII;
+ }
+
+ return cpsw_register(&cpsw_data);
+}
+#endif
diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h
new file mode 100644
index 000000000..7985ab2c1
--- /dev/null
+++ b/board/ti/am335x/board.h
@@ -0,0 +1,49 @@
+/*
+ * board.h
+ *
+ * TI AM335x boards information header
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * TI AM335x parts define a system EEPROM that defines certain sub-fields.
+ * We use these fields to in turn see what board we are on, and what
+ * that might require us to set or not set.
+ */
+#define HDR_NO_OF_MAC_ADDR 3
+#define HDR_ETH_ALEN 6
+#define HDR_NAME_LEN 8
+
+struct am335x_baseboard_id {
+ unsigned int magic;
+ char name[HDR_NAME_LEN];
+ char version[4];
+ char serial[12];
+ char config[32];
+ char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
+};
+
+/*
+ * We have three pin mux functions that must exist. We must be able to enable
+ * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(struct am335x_baseboard_id *header);
+#endif
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 80becd5c7..29929791f 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -16,242 +16,10 @@
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
#include <asm/io.h>
#include <i2c.h>
-
-#define MUX_CFG(value, offset) \
- __raw_writel(value, (CTRL_BASE + offset));
-
-/* PAD Control Fields */
-#define SLEWCTRL (0x1 << 6)
-#define RXACTIVE (0x1 << 5)
-#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */
-#define PULLUDEN (0x0 << 3) /* Pull up enabled */
-#define PULLUDDIS (0x1 << 3) /* Pull up disabled */
-#define MODE(val) val /* used for Readability */
-
-/*
- * PAD CONTROL OFFSETS
- * Field names corresponds to the pad signal name
- */
-struct pad_signals {
- int gpmc_ad0;
- int gpmc_ad1;
- int gpmc_ad2;
- int gpmc_ad3;
- int gpmc_ad4;
- int gpmc_ad5;
- int gpmc_ad6;
- int gpmc_ad7;
- int gpmc_ad8;
- int gpmc_ad9;
- int gpmc_ad10;
- int gpmc_ad11;
- int gpmc_ad12;
- int gpmc_ad13;
- int gpmc_ad14;
- int gpmc_ad15;
- int gpmc_a0;
- int gpmc_a1;
- int gpmc_a2;
- int gpmc_a3;
- int gpmc_a4;
- int gpmc_a5;
- int gpmc_a6;
- int gpmc_a7;
- int gpmc_a8;
- int gpmc_a9;
- int gpmc_a10;
- int gpmc_a11;
- int gpmc_wait0;
- int gpmc_wpn;
- int gpmc_be1n;
- int gpmc_csn0;
- int gpmc_csn1;
- int gpmc_csn2;
- int gpmc_csn3;
- int gpmc_clk;
- int gpmc_advn_ale;
- int gpmc_oen_ren;
- int gpmc_wen;
- int gpmc_be0n_cle;
- int lcd_data0;
- int lcd_data1;
- int lcd_data2;
- int lcd_data3;
- int lcd_data4;
- int lcd_data5;
- int lcd_data6;
- int lcd_data7;
- int lcd_data8;
- int lcd_data9;
- int lcd_data10;
- int lcd_data11;
- int lcd_data12;
- int lcd_data13;
- int lcd_data14;
- int lcd_data15;
- int lcd_vsync;
- int lcd_hsync;
- int lcd_pclk;
- int lcd_ac_bias_en;
- int mmc0_dat3;
- int mmc0_dat2;
- int mmc0_dat1;
- int mmc0_dat0;
- int mmc0_clk;
- int mmc0_cmd;
- int mii1_col;
- int mii1_crs;
- int mii1_rxerr;
- int mii1_txen;
- int mii1_rxdv;
- int mii1_txd3;
- int mii1_txd2;
- int mii1_txd1;
- int mii1_txd0;
- int mii1_txclk;
- int mii1_rxclk;
- int mii1_rxd3;
- int mii1_rxd2;
- int mii1_rxd1;
- int mii1_rxd0;
- int rmii1_refclk;
- int mdio_data;
- int mdio_clk;
- int spi0_sclk;
- int spi0_d0;
- int spi0_d1;
- int spi0_cs0;
- int spi0_cs1;
- int ecap0_in_pwm0_out;
- int uart0_ctsn;
- int uart0_rtsn;
- int uart0_rxd;
- int uart0_txd;
- int uart1_ctsn;
- int uart1_rtsn;
- int uart1_rxd;
- int uart1_txd;
- int i2c0_sda;
- int i2c0_scl;
- int mcasp0_aclkx;
- int mcasp0_fsx;
- int mcasp0_axr0;
- int mcasp0_ahclkr;
- int mcasp0_aclkr;
- int mcasp0_fsr;
- int mcasp0_axr1;
- int mcasp0_ahclkx;
- int xdma_event_intr0;
- int xdma_event_intr1;
- int nresetin_out;
- int porz;
- int nnmi;
- int osc0_in;
- int osc0_out;
- int rsvd1;
- int tms;
- int tdi;
- int tdo;
- int tck;
- int ntrst;
- int emu0;
- int emu1;
- int osc1_in;
- int osc1_out;
- int pmic_power_en;
- int rtc_porz;
- int rsvd2;
- int ext_wakeup;
- int enz_kaldo_1p8v;
- int usb0_dm;
- int usb0_dp;
- int usb0_ce;
- int usb0_id;
- int usb0_vbus;
- int usb0_drvvbus;
- int usb1_dm;
- int usb1_dp;
- int usb1_ce;
- int usb1_id;
- int usb1_vbus;
- int usb1_drvvbus;
- int ddr_resetn;
- int ddr_csn0;
- int ddr_cke;
- int ddr_ck;
- int ddr_nck;
- int ddr_casn;
- int ddr_rasn;
- int ddr_wen;
- int ddr_ba0;
- int ddr_ba1;
- int ddr_ba2;
- int ddr_a0;
- int ddr_a1;
- int ddr_a2;
- int ddr_a3;
- int ddr_a4;
- int ddr_a5;
- int ddr_a6;
- int ddr_a7;
- int ddr_a8;
- int ddr_a9;
- int ddr_a10;
- int ddr_a11;
- int ddr_a12;
- int ddr_a13;
- int ddr_a14;
- int ddr_a15;
- int ddr_odt;
- int ddr_d0;
- int ddr_d1;
- int ddr_d2;
- int ddr_d3;
- int ddr_d4;
- int ddr_d5;
- int ddr_d6;
- int ddr_d7;
- int ddr_d8;
- int ddr_d9;
- int ddr_d10;
- int ddr_d11;
- int ddr_d12;
- int ddr_d13;
- int ddr_d14;
- int ddr_d15;
- int ddr_dqm0;
- int ddr_dqm1;
- int ddr_dqs0;
- int ddr_dqsn0;
- int ddr_dqs1;
- int ddr_dqsn1;
- int ddr_vref;
- int ddr_vtp;
- int ddr_strben0;
- int ddr_strben1;
- int ain7;
- int ain6;
- int ain5;
- int ain4;
- int ain3;
- int ain2;
- int ain1;
- int ain0;
- int vrefp;
- int vrefn;
-};
-
-struct module_pin_mux {
- short reg_offset;
- unsigned char val;
-};
-
-/* Pad control register offset */
-#define PAD_CTRL_BASE 0x800
-#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \
- (PAD_CTRL_BASE))->x)
+#include "board.h"
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
@@ -362,20 +130,6 @@ static struct module_pin_mux mii1_pin_mux[] = {
{-1},
};
-/*
- * Configure the pin mux for the module
- */
-static void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux)
-{
- int i;
-
- if (!mod_pin_mux)
- return;
-
- for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
- MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
-}
-
void enable_uart0_pin_mux(void)
{
configure_module_pin_mux(uart0_pin_mux);
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-17 07:55:00 +0000