ColdFire: Use CFI Flash driver for M54455EVB

Remove non-common flash driver in
board/freescale/m54455evb/flash.c. The non-cfi flash will
use CONFIG_FLASH_CFI_LEGACY to configure the flash
attribute.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

3 files changed, 52 insertions, 1289 deletions

diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile
index ca9a7729e..74c252869 100644
--- a/board/freescale/m54455evb/Makefile
+++ b/board/freescale/m54455evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o mii.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
@@ -41,4 +41,4 @@ include $(SRCTREE)/rules.mk
 
 sinclude $(obj).depend
 
-#########################################################################
\ No newline at end of file
+#########################################################################
diff --git a/board/freescale/m54455evb/flash.c b/board/freescale/m54455evb/flash.c
deleted file mode 100644
index 6b50e8d82..000000000
--- a/board/freescale/m54455evb/flash.c
+++ /dev/null
@@ -1,1287 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/immap.h>
-
-#ifndef CFG_FLASH_CFI
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-
-#define FPW             FLASH_PORT_WIDTH
-#define FPWV            FLASH_PORT_WIDTHV
-
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#define CFG_FLASH_NONCFI_WIDTH	FLASH_CFI_8BIT
-
-/* Intel-compatible flash commands */
-#define INTEL_PROGRAM   0x00100010
-#define INTEL_ERASE     0x00200020
-#define INTEL_WRSETUP	0x00400040
-#define INTEL_CLEAR     0x00500050
-#define INTEL_LOCKBIT   0x00600060
-#define INTEL_PROTECT   0x00010001
-#define INTEL_STATUS    0x00700070
-#define INTEL_READID    0x00900090
-#define INTEL_CFIQRY	0x00980098
-#define INTEL_SUSERASE	0x00B000B0
-#define INTEL_PROTPROG	0x00C000C0
-#define INTEL_CONFIRM   0x00D000D0
-#define INTEL_WRBLK	0x00e800e8
-#define INTEL_RESET     0x00FF00FF
-
-/* Intel-compatible flash status bits */
-#define INTEL_FINISHED  0x00800080
-#define INTEL_OK        0x00800080
-#define INTEL_ERASESUS  0x00600060
-#define INTEL_WSM_SUS   (INTEL_FINISHED | INTEL_ERASESUS)
-
-/* 28F160C3B CFI Data offset - This could vary */
-#define INTEL_CFI_MFG	0x00	/* Manufacturer ID */
-#define INTEL_CFI_PART	0x01	/* Product ID */
-#define INTEL_CFI_LOCK  0x02	/* */
-#define INTEL_CFI_TWPRG 0x1F	/* Typical Single Word Program Timeout 2^n us */
-#define INTEL_CFI_MBUFW 0x20	/* Typical Max Buffer Write Timeout 2^n us */
-#define INTEL_CFI_TERB	0x21	/* Typical Block Erase Timeout 2^n ms */
-#define INTEL_CFI_MWPRG 0x23	/* Maximum Word program timeout 2^n us */
-#define INTEL_CFI_MERB  0x25	/* Maximum Block Erase Timeout 2^n s */
-#define INTEL_CFI_SIZE	0x27	/* Device size 2^n bytes */
-#define INTEL_CFI_CAP	0x28
-#define INTEL_CFI_WRBUF	0x2A
-#define INTEL_CFI_BANK	0x2C	/* Number of Bank */
-#define INTEL_CFI_BLK1A	0x2D	/* Number of Blocks */
-#define INTEL_CFI_BLK1B	0x2E	/* Number of Blocks */
-#define INTEL_CFI_SZ1A	0x2F	/* Block Region Size */
-#define INTEL_CFI_SZ1B	0x30
-#define INTEL_CFI_BLK2A	0x31
-#define INTEL_CFI_BLK2B	0x32
-#define INTEL_CFI_SZ2A	0x33
-#define INTEL_CFI_SZ2B	0x34
-
-#define FLASH_CYCLE1    0x0555
-#define FLASH_CYCLE2    0x0aaa
-
-#define WR_BLOCK        0x20
-
-/* not in the flash.h yet */
-#define FLASH_28F64P30T		0x00B9	/* Intel 28F64P30T   (  64M)            */
-#define FLASH_28F64P30B		0x00BA	/* Intel 28F64P30B   (  64M)            */
-#define FLASH_28F128P30T	0x00BB	/* Intel 28F128P30T  ( 128M = 8M x 16 ) */
-#define FLASH_28F128P30B	0x00BC	/* Intel 28F128P30B  ( 128M = 8M x 16 ) */
-#define FLASH_28F256P30T	0x00BD	/* Intel 28F256P30T  ( 256M = 16M x 16 )        */
-#define FLASH_28F256P30B	0x00BE	/* Intel 28F256P30B  ( 256M = 16M x 16 )        */
-
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-#define STM_ID_M25P16		0x20152015
-#define FLASH_M25P16		0x0055
-#endif
-
-#define SYNC			__asm__("nop")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-ulong flash_get_size(FPWV * addr, flash_info_t * info);
-int flash_get_offsets(ulong base, flash_info_t * info);
-int flash_cmd_rd(volatile u16 * addr, int index);
-int write_data(flash_info_t * info, ulong dest, FPW data);
-int write_data_block(flash_info_t * info, ulong src, ulong dest);
-int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data);
-void inline spin_wheel(void);
-void flash_sync_real_protect(flash_info_t * info);
-uchar intel_sector_protected(flash_info_t * info, ushort sector);
-
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-int write_ser_data(flash_info_t * info, ulong dest, uchar * data, ulong cnt);
-int serial_flash_read_status(int chipsel);
-static int ser_flash_cs = 0;
-#endif
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-ulong flash_init(void)
-{
-	int i;
-	ulong size = 0;
-	ulong fbase = 0;
-
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-	dspi_init();
-#endif
-
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-		memset(&flash_info[i], 0, sizeof(flash_info_t));
-
-		switch (i) {
-		case 0:
-			fbase = (ulong) CFG_FLASH0_BASE;
-			break;
-		case 1:
-			fbase = (ulong) CFG_FLASH1_BASE;
-			break;
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-		case 2:
-			fbase = (ulong) CFG_FLASH2_BASE;
-			break;
-#endif
-		}
-
-		flash_get_size((FPWV *) fbase, &flash_info[i]);
-		flash_get_offsets((ulong) fbase, &flash_info[i]);
-		fbase += flash_info[i].size;
-		size += flash_info[i].size;
-
-		/* get the h/w and s/w protection status in sync */
-		flash_sync_real_protect(&flash_info[i]);
-	}
-
-	/* Protect monitor and environment sectors */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
-
-	return size;
-}
-
-int flash_get_offsets(ulong base, flash_info_t * info)
-{
-	int i, j, k;
-	int sectors, bs, banks;
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_ATM) {
-		int sect[] = CFG_ATMEL_SECT;
-		int sectsz[] = CFG_ATMEL_SECTSZ;
-
-		info->start[0] = base;
-		for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) {
-			for (j = 0; j < sect[i]; j++, k++) {
-				info->start[k + 1] = info->start[k] + sectsz[i];
-				info->protect[k] = 0;
-			}
-		}
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		volatile u16 *addr16 = (volatile u16 *)base;
-
-		*addr16 = (FPW) INTEL_RESET;	/* restore read mode */
-		*addr16 = (FPW) INTEL_READID;
-
-		banks = addr16[INTEL_CFI_BANK] & 0xff;
-
-		sectors = 0;
-		info->start[0] = base;
-
-		for (k = 0, i = 0; i < banks; i++) {
-			/* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec.
-			 * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count
-			 * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count
-			 */
-			bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8)
-			       | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) *
-			      0x100);
-			sectors =
-			    (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1;
-
-			for (j = 0; j < sectors; j++, k++) {
-				info->start[k + 1] = info->start[k] + bs;
-			}
-		}
-
-		*addr16 = (FPW) INTEL_RESET;	/* restore read mode */
-	}
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM) {
-		info->start[0] = CFG_FLASH2_BASE;
-		for (k = 0, i = 0; i < CFG_STM_SECT; i++, k++) {
-			info->start[k + 1] = info->start[k] + CFG_STM_SECTSZ;
-			info->protect[k] = 0;
-		}
-	}
-#endif
-
-	return ERR_OK;
-}
-
-void flash_print_info(flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf("INTEL ");
-		break;
-	case FLASH_MAN_ATM:
-		printf("ATMEL ");
-		break;
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-	case FLASH_MAN_STM:
-		printf("ST ");
-		break;
-#endif
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AT040:
-		printf("AT49BV040A\n");
-		break;
-	case FLASH_28F128J3A:
-		printf("28F128J3A\n");
-		break;
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-	case FLASH_M25P16:
-		printf("M25P16\n");
-		break;
-#endif
-	default:
-		printf("Unknown Chip Type\n");
-		return;
-	}
-
-	if (info->size > 0x100000) {
-		int remainder;
-
-		printf("  Size: %ld", info->size >> 20);
-
-		remainder = (info->size % 0x100000);
-		if (remainder) {
-			remainder >>= 10;
-			remainder = (int)((float)
-					  (((float)remainder / (float)1024) *
-					   10000));
-			printf(".%d ", remainder);
-		}
-
-		printf("MB in %d Sectors\n", info->sector_count);
-	} else
-		printf("  Size: %ld KB in %d Sectors\n",
-		       info->size >> 10, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s",
-		       info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf("\n");
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-ulong flash_get_size(FPWV * addr, flash_info_t * info)
-{
-	volatile u16 *addr16 = (volatile u16 *)addr;
-	int intel = 0, banks = 0;
-	u16 value;
-	int i;
-
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-	if ((ulong) addr == CFG_FLASH2_BASE) {
-		int manufactId = 0;
-		int deviceId = 0;
-
-		ser_flash_cs = 1;
-
-		dspi_tx(ser_flash_cs, 0x80, SER_RDID);
-		dspi_tx(ser_flash_cs, 0x80, 0);
-		dspi_tx(ser_flash_cs, 0x80, 0);
-		dspi_tx(ser_flash_cs, 0x80, 0);
-
-		dspi_rx();
-		manufactId = dspi_rx();
-		deviceId = dspi_rx() << 8;
-		deviceId |= dspi_rx();
-
-		dspi_tx(ser_flash_cs, 0x00, 0);
-		dspi_rx();
-
-		switch (manufactId) {
-		case (u8) STM_MANUFACT:
-			info->flash_id = FLASH_MAN_STM;
-			break;
-		}
-
-		switch (deviceId) {
-		case (u16) STM_ID_M25P16:
-			info->flash_id += FLASH_M25P16;
-			break;
-		}
-
-		info->sector_count = CFG_STM_SECT;
-		info->size = CFG_STM_SECT * CFG_STM_SECTSZ;
-
-		return (info->size);
-	}
-#endif
-
-	addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA;	/* for Atmel, Intel ignores this */
-	addr[FLASH_CYCLE2] = (FPWV) 0x00550055;	/* for Atmel, Intel ignores this */
-	addr[FLASH_CYCLE1] = (FPWV) 0x00900090;	/* selects Intel or Atmel */
-
-	switch (addr[0] & 0xff) {
-	case (u8) ATM_MANUFACT:
-		info->flash_id = FLASH_MAN_ATM;
-		value = addr[1];
-		break;
-	case (u8) INTEL_MANUFACT:
-		/* Terminate Atmel ID read */
-		addr[0] = (FPWV) 0x00F000F0;
-		/* Write auto select command: read Manufacturer ID */
-		/* Write auto select command sequence and test FLASH answer */
-		*addr16 = (FPW) INTEL_RESET;	/* restore read mode */
-		*addr16 = (FPW) INTEL_READID;
-
-		info->flash_id = FLASH_MAN_INTEL;
-		value = (addr16[INTEL_CFI_MFG] << 8);
-		value |= addr16[INTEL_CFI_PART] & 0xff;
-		intel = 1;
-		break;
-	default:
-		printf("Unknown Flash\n");
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-
-		*addr = (FPW) 0x00F000F0;
-		*addr = (FPW) INTEL_RESET;	/* restore read mode */
-		return (0);	/* no or unknown flash  */
-	}
-
-	switch (value) {
-	case (u8) ATM_ID_LV040:
-		info->flash_id += FLASH_AT040;
-		break;
-	case (u16) INTEL_ID_28F128J3:
-		info->flash_id += FLASH_28F128J3A;
-		break;
-	case (u16) INTEL_ID_28F64P30T:
-		info->flash_id += FLASH_28F64P30T;
-		break;
-	case (u16) INTEL_ID_28F64P30B:
-		info->flash_id += FLASH_28F64P30B;
-		break;
-	case (u16) INTEL_ID_28F128P30T:
-		info->flash_id += FLASH_28F128P30T;
-		break;
-	case (u16) INTEL_ID_28F128P30B:
-		info->flash_id += FLASH_28F128P30B;
-		break;
-	case (u16) INTEL_ID_28F256P30T:
-		info->flash_id += FLASH_28F256P30T;
-		break;
-	case (u16) INTEL_ID_28F256P30B:
-		info->flash_id += FLASH_28F256P30B;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (intel) {
-		/* Intel spec. under CFI section */
-		u32 sz;
-		int sectors, bs;
-
-		banks = addr16[INTEL_CFI_BANK] & 0xff;
-
-		sectors = sz = 0;
-		for (i = 0; i < banks; i++) {
-			/* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec.
-			 * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count
-			 * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count
-			 */
-			bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8)
-			       | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) *
-			      0x100);
-			sectors +=
-			    (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1;
-			sz += (bs * sectors);
-		}
-
-		info->sector_count = sectors;
-		info->size = sz;
-		*addr = (FPW) INTEL_RESET;	/* restore read mode */
-	} else {
-		int sect[] = CFG_ATMEL_SECT;
-		int sectsz[] = CFG_ATMEL_SECTSZ;
-
-		info->sector_count = 0;
-		info->size = 0;
-		for (i = 0; i < CFG_ATMEL_REGION; i++) {
-			info->sector_count += sect[i];
-			info->size += sect[i] * sectsz[i];
-		}
-
-		/* reset ID mode */
-		addr[0] = (FPWV) 0x00F000F0;
-	}
-
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
-		printf("** ERROR: sector count %d > max (%d) **\n",
-		       info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
-	}
-
-	return (info->size);
-}
-
-int flash_cmd_rd(volatile u16 * addr, int index)
-{
-	return (int)addr[index];
-}
-
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-int serial_flash_read_status(int chipsel)
-{
-	u16 status;
-
-	dspi_tx(chipsel, 0x80, SER_RDSR);
-	dspi_rx();
-
-	dspi_tx(chipsel, 0x00, 0);
-	status = dspi_rx();
-
-	return status;
-}
-#endif
-
-/*
- * This function gets the u-boot flash sector protection status
- * (flash_info_t.protect[]) in sync with the sector protection
- * status stored in hardware.
- */
-void flash_sync_real_protect(flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		for (i = 0; i < info->sector_count; ++i) {
-			info->protect[i] = intel_sector_protected(info, i);
-		}
-		break;
-	default:
-		/* no h/w protect support */
-		break;
-	}
-}
-
-/*
- * checks if "sector" in bank "info" is protected. Should work on intel
- * strata flash chips 28FxxxJ3x in 8-bit mode.
- * Returns 1 if sector is protected (or timed-out while trying to read
- * protection status), 0 if it is not.
- */
-uchar intel_sector_protected(flash_info_t * info, ushort sector)
-{
-	FPWV *addr;
-	FPWV *lock_conf_addr;
-	ulong start;
-	unsigned char ret;
-
-	/*
-	 * first, wait for the WSM to be finished. The rationale for
-	 * waiting for the WSM to become idle for at most
-	 * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
-	 * because of: (1) erase, (2) program or (3) lock bit
-	 * configuration. So we just wait for the longest timeout of
-	 * the (1)-(3), i.e. the erase timeout.
-	 */
-
-	/* wait at least 35ns (W12) before issuing Read Status Register */
-	/*udelay(1); */
-	addr = (FPWV *) info->start[sector];
-	*addr = (FPW) INTEL_STATUS;
-
-	start = get_timer(0);
-	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
-			*addr = (FPW) INTEL_RESET;	/* restore read mode */
-			printf("WSM busy too long, can't get prot status\n");
-			return 1;
-		}
-	}
-
-	/* issue the Read Identifier Codes command */
-	*addr = (FPW) INTEL_READID;
-
-	/* Intel example code uses offset of 4 for 8-bit flash */
-	lock_conf_addr = (FPWV *) info->start[sector];
-	ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0;
-
-	/* put flash back in read mode */
-	*addr = (FPW) INTEL_RESET;
-
-	return ret;
-}
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong type, start, last;
-	int rcode = 0, flashtype = 0;
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-	int count;
-	u16 status;
-#endif
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-
-	switch (type) {
-	case FLASH_MAN_ATM:
-		flashtype = 1;
-		break;
-	case FLASH_MAN_INTEL:
-		flashtype = 2;
-		break;
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-	case FLASH_MAN_STM:
-		flashtype = 3;
-		break;
-#endif
-	default:
-		type = (info->flash_id & FLASH_VENDMASK);
-		printf("Can't erase unknown flash type %08lx - aborted\n",
-		       info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot)
-		printf("- Warning: %d protected sectors will not be erased!\n",
-		       prot);
-	else
-		printf("\n");
-
-	start = get_timer(0);
-	last = start;
-
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-	/* Perform bulk erase */
-	if (flashtype == 3) {
-		if ((s_last - s_first) == (CFG_STM_SECT - 1)) {
-			if (prot == 0) {
-				dspi_tx(ser_flash_cs, 0x00, SER_WREN);
-				dspi_rx();
-
-				status = serial_flash_read_status(ser_flash_cs);
-				if (((status & 0x9C) != 0)
-				    && ((status & 0x02) != 0x02)) {
-					printf("Can't erase flash\n");
-					return 1;
-				}
-
-				dspi_tx(ser_flash_cs, 0x00, SER_BULK_ERASE);
-				dspi_rx();
-
-				count = 0;
-				start = get_timer(0);
-				do {
-					status =
-					    serial_flash_read_status
-					    (ser_flash_cs);
-
-					if (count++ > 0x10000) {
-						spin_wheel();
-						count = 0;
-					}
-
-					if (get_timer(start) >
-					    CFG_FLASH_ERASE_TOUT) {
-						printf("Timeout\n");
-						return 1;
-					}
-				} while (status & 0x01);
-
-				printf("\b. done\n");
-				return 0;
-			} else if (prot == CFG_STM_SECT) {
-				return 1;
-			}
-		}
-	}
-#endif
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			int min = 0;
-
-			printf(".");
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			switch (flashtype) {
-			case 1:
-				{
-					FPWV *base;	/* first address in bank */
-					FPWV *atmeladdr;
-
-					flag = disable_interrupts();
-
-					atmeladdr = (FPWV *) addr;	/* concatenate to 8 bit */
-					base = (FPWV *) (CFG_ATMEL_BASE);	/* First sector */
-
-					base[FLASH_CYCLE1] = (u8) 0x00AA00AA;	/* unlock */
-					base[FLASH_CYCLE2] = (u8) 0x00550055;	/* unlock */
-					base[FLASH_CYCLE1] = (u8) 0x00800080;	/* erase mode */
-					base[FLASH_CYCLE1] = (u8) 0x00AA00AA;	/* unlock */
-					base[FLASH_CYCLE2] = (u8) 0x00550055;	/* unlock */
-					*atmeladdr = (u8) 0x00300030;	/* erase sector */
-
-					if (flag)
-						enable_interrupts();
-
-					while ((*atmeladdr & (u8) 0x00800080) !=
-					       (u8) 0x00800080) {
-						if (get_timer(start) >
-						    CFG_FLASH_ERASE_TOUT) {
-							printf("Timeout\n");
-							*atmeladdr = (u8) 0x00F000F0;	/* reset to read mode */
-
-							rcode = 1;
-							break;
-						}
-					}
-
-					*atmeladdr = (u8) 0x00F000F0;	/* reset to read mode */
-					break;
-				}
-
-			case 2:
-				{
-					*addr = (FPW) INTEL_READID;
-					min = addr[INTEL_CFI_TERB] & 0xff;
-					min = 1 << min;	/* ms */
-					min = (min / info->sector_count) * 1000;
-
-					/* start erase block */
-					*addr = (FPW) INTEL_CLEAR;	/* clear status register */
-					*addr = (FPW) INTEL_ERASE;	/* erase setup */
-					*addr = (FPW) INTEL_CONFIRM;	/* erase confirm */
-
-					while ((*addr & (FPW) INTEL_FINISHED) !=
-					       (FPW) INTEL_FINISHED) {
-
-						if (get_timer(start) >
-						    CFG_FLASH_ERASE_TOUT) {
-							printf("Timeout\n");
-							*addr = (FPW) INTEL_SUSERASE;	/* suspend erase     */
-							*addr = (FPW) INTEL_RESET;	/* reset to read mode */
-
-							rcode = 1;
-							break;
-						}
-					}
-
-					*addr = (FPW) INTEL_RESET;	/* resest to read mode          */
-					break;
-				}
-
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-			case 3:
-				{
-					u8 sec = ((ulong) addr >> 16) & 0xFF;
-
-					dspi_tx(ser_flash_cs, 0x00, SER_WREN);
-					dspi_rx();
-					status =
-					    serial_flash_read_status
-					    (ser_flash_cs);
-					if (((status & 0x9C) != 0)
-					    && ((status & 0x02) != 0x02)) {
-						printf("Error Programming\n");
-						return 1;
-					}
-
-					dspi_tx(ser_flash_cs, 0x80,
-						SER_SECT_ERASE);
-					dspi_tx(ser_flash_cs, 0x80, sec);
-					dspi_tx(ser_flash_cs, 0x80, 0);
-					dspi_tx(ser_flash_cs, 0x00, 0);
-
-					dspi_rx();
-					dspi_rx();
-					dspi_rx();
-					dspi_rx();
-
-					do {
-						status =
-						    serial_flash_read_status
-						    (ser_flash_cs);
-
-						if (get_timer(start) >
-						    CFG_FLASH_ERASE_TOUT) {
-							printf("Timeout\n");
-							return 1;
-						}
-					} while (status & 0x01);
-
-					break;
-				}
-#endif
-			}	/* switch (flashtype) */
-		}
-	}
-	printf(" done\n");
-
-	return rcode;
-}
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int count;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return 4;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_ATM:
-		{
-			u16 data = 0;
-			int bytes;	/* number of bytes to program in current word */
-			int left;	/* number of bytes left to program */
-			int i, res;
-
-			for (left = cnt, res = 0;
-			     left > 0 && res == 0;
-			     addr += sizeof(data), left -=
-			     sizeof(data) - bytes) {
-
-				bytes = addr & (sizeof(data) - 1);
-				addr &= ~(sizeof(data) - 1);
-
-				/* combine source and destination data so can program
-				 * an entire word of 16 or 32 bits
-				 */
-				for (i = 0; i < sizeof(data); i++) {
-					data <<= 8;
-					if (i < bytes || i - bytes >= left)
-						data += *((uchar *) addr + i);
-					else
-						data += *src++;
-				}
-
-				data = (data >> 8) | (data << 8);
-				res = write_word_atm(info, (FPWV *) addr, data);
-			}
-			return res;
-		}		/* case FLASH_MAN_ATM */
-
-	case FLASH_MAN_INTEL:
-		{
-			ulong cp, wp;
-			u16 data;
-			int i, l, rc, port_width;
-
-			/* get lower word aligned address */
-			wp = addr;
-			port_width = sizeof(FPW);
-
-			/*
-			 * handle unaligned start bytes
-			 */
-			if ((l = addr - wp) != 0) {
-				data = 0;
-				for (i = 0, cp = wp; i < l; ++i, ++cp) {
-					data = (data << 8) | (*(uchar *) cp);
-				}
-
-				for (; i < port_width && cnt > 0; ++i) {
-					data = (data << 8) | *src++;
-					--cnt;
-					++cp;
-				}
-
-				for (; cnt == 0 && i < port_width; ++i, ++cp)
-					data = (data << 8) | (*(uchar *) cp);
-
-				if ((rc = write_data(info, wp, data)) != 0)
-					return (rc);
-
-				wp += port_width;
-			}
-
-			if (cnt > WR_BLOCK) {
-				/*
-				 * handle word aligned part
-				 */
-				count = 0;
-				while (cnt >= WR_BLOCK) {
-
-					if ((rc =
-					     write_data_block(info,
-							      (ulong) src,
-							      wp)) != 0)
-						return (rc);
-
-					wp += WR_BLOCK;
-					src += WR_BLOCK;
-					cnt -= WR_BLOCK;
-
-					if (count++ > 0x800) {
-						spin_wheel();
-						count = 0;
-					}
-				}
-			}
-
-			/* handle word aligned part */
-			if (cnt < WR_BLOCK) {
-				/*
-				 * handle word aligned part
-				 */
-				count = 0;
-				while (cnt >= port_width) {
-					data = 0;
-					for (i = 0; i < port_width; ++i)
-						data = (data << 8) | *src++;
-
-					if ((rc =
-					     write_data(info,
-							(ulong) ((FPWV *) wp),
-							(FPW) (data))) != 0)
-						return (rc);
-
-					wp += port_width;
-					cnt -= port_width;
-					if (count++ > 0x800) {
-						spin_wheel();
-						count = 0;
-					}
-				}
-			}
-
-			if (cnt == 0)
-				return ERR_OK;
-
-			/*
-			 * handle unaligned tail bytes
-			 */
-			data = 0;
-			for (i = 0, cp = wp; i < port_width && cnt > 0;
-			     ++i, ++cp) {
-				data = (data << 8) | (*src++);
-				--cnt;
-			}
-			for (; i < port_width; ++i, ++cp) {
-				data = (data << 8) | (*(uchar *) cp);
-			}
-
-			return write_data(info, (ulong) ((FPWV *) wp),
-					  (FPW) data);
-
-		}		/* case FLASH_MAN_INTEL */
-
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-	case FLASH_MAN_STM:
-		{
-			ulong wp;
-			u8 *data = (u8 *) src;
-			int left;	/* number of bytes left to program */
-
-			wp = addr;
-
-			/* page align, each page is 256 bytes */
-			if ((wp % 0x100) != 0) {
-				left = (0x100 - (wp & 0xFF));
-				write_ser_data(info, wp, data, left);
-				cnt -= left;
-				wp += left;
-				data += left;
-			}
-
-			/* page program - 256 bytes at a time */
-			if (cnt > 255) {
-				count = 0;
-				while (cnt >= 0x100) {
-					write_ser_data(info, wp, data, 0x100);
-					cnt -= 0x100;
-					wp += 0x100;
-					data += 0x100;
-
-					if (count++ > 0x400) {
-						spin_wheel();
-						count = 0;
-					}
-				}
-			}
-
-			/* remainint bytes */
-			if (cnt && (cnt < 256)) {
-				write_ser_data(info, wp, data, cnt);
-				wp += cnt;
-				data += cnt;
-				cnt -= cnt;
-			}
-
-			printf("\b.");
-		}
-#endif
-	}			/* switch */
-
-	return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_data_block(flash_info_t * info, ulong src, ulong dest)
-{
-	FPWV *srcaddr = (FPWV *) src;
-	FPWV *dstaddr = (FPWV *) dest;
-	ulong start;
-	int flag, i;
-
-	/* Check if Flash is (sufficiently) erased */
-	for (i = 0; i < WR_BLOCK; i++)
-		if ((*dstaddr++ & 0xff) != 0xff) {
-			printf("not erased at %08lx (%lx)\n",
-			       (ulong) dstaddr, *dstaddr);
-			return (2);
-		}
-
-	dstaddr = (FPWV *) dest;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	*dstaddr = (FPW) INTEL_WRBLK;	/* write block setup */
-
-	if (flag)
-		enable_interrupts();
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			*dstaddr = (FPW) INTEL_RESET;	/* restore read mode */
-			return (1);
-		}
-	}
-
-	*dstaddr = (FPW) WR_BLOCK - 1;	/* write 32 to buffer */
-	for (i = 0; i < WR_BLOCK; i++)
-		*dstaddr++ = *srcaddr++;
-
-	dstaddr -= 1;
-	*dstaddr = (FPW) INTEL_CONFIRM;	/* write 32 to buffer */
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			*dstaddr = (FPW) INTEL_RESET;	/* restore read mode */
-			return (1);
-		}
-	}
-
-	*dstaddr = (FPW) INTEL_RESET;	/* restore read mode */
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_data(flash_info_t * info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf("not erased at %08lx (%lx)\n", (ulong) addr,
-		       (ulong) * addr);
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = (int)disable_interrupts();
-
-	*addr = (FPW) INTEL_CLEAR;
-	*addr = (FPW) INTEL_RESET;
-
-	*addr = (FPW) INTEL_WRSETUP;	/* write setup */
-	*addr = data;
-
-	if (flag)
-		enable_interrupts();
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			*addr = (FPW) INTEL_SUSERASE;	/* suspend mode */
-			*addr = (FPW) INTEL_CLEAR;	/* clear status */
-			*addr = (FPW) INTEL_RESET;	/* reset */
-			return (1);
-		}
-	}
-
-	*addr = (FPW) INTEL_CLEAR;	/* clear status */
-	*addr = (FPW) INTEL_RESET;	/* restore read mode */
-
-	return (0);
-}
-
-#if defined(CONFIG_SERIAL_FLASH) && defined(CONFIG_CF_DSPI)
-int write_ser_data(flash_info_t * info, ulong dest, uchar * data, ulong cnt)
-{
-	ulong start;
-	int status, i;
-	u8 flashdata;
-
-	/* Check if Flash is (sufficiently) erased */
-	dspi_tx(ser_flash_cs, 0x80, SER_READ);
-	dspi_tx(ser_flash_cs, 0x80, (dest >> 16) & 0xFF);
-	dspi_tx(ser_flash_cs, 0x80, (dest >> 8) & 0xFF);
-	dspi_tx(ser_flash_cs, 0x80, dest & 0xFF);
-	dspi_rx();
-	dspi_rx();
-	dspi_rx();
-	dspi_rx();
-	dspi_tx(ser_flash_cs, 0x80, 0);
-	flashdata = dspi_rx();
-	dspi_tx(ser_flash_cs, 0x00, 0);
-	dspi_rx();
-
-	if ((flashdata & *data) != *data) {
-		printf("not erased at %08lx (%lx)\n", (ulong) dest,
-		       (ulong) flashdata);
-		return (2);
-	}
-
-	dspi_tx(ser_flash_cs, 0x00, SER_WREN);
-	dspi_rx();
-
-	status = serial_flash_read_status(ser_flash_cs);
-	if (((status & 0x9C) != 0) && ((status & 0x02) != 0x02)) {
-		printf("Error Programming\n");
-		return 1;
-	}
-
-	start = get_timer(0);
-
-	dspi_tx(ser_flash_cs, 0x80, SER_PAGE_PROG);
-	dspi_tx(ser_flash_cs, 0x80, ((dest & 0xFF0000) >> 16));
-	dspi_tx(ser_flash_cs, 0x80, ((dest & 0xFF00) >> 8));
-	dspi_tx(ser_flash_cs, 0x80, (dest & 0xFF));
-	dspi_rx();
-	dspi_rx();
-	dspi_rx();
-	dspi_rx();
-
-	for (i = 0; i < (cnt - 1); i++) {
-		dspi_tx(ser_flash_cs, 0x80, *data);
-		dspi_rx();
-		data++;
-	}
-
-	dspi_tx(ser_flash_cs, 0x00, *data);
-	dspi_rx();
-
-	do {
-		status = serial_flash_read_status(ser_flash_cs);
-
-		if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return 1;
-		}
-	} while (status & 0x01);
-
-	return (0);
-}
-#endif
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for ATMEL FLASH
- * A word is 16 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data)
-{
-	ulong start;
-	int flag, i;
-	int res = 0;		/* result, assume success */
-	FPWV *base;		/* first address in flash bank */
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile u16 *)dest) & data) != data) {
-		return (2);
-	}
-
-	base = (FPWV *) (CFG_ATMEL_BASE);
-
-	for (i = 0; i < sizeof(u16); i++) {
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		base[FLASH_CYCLE1] = (u8) 0x00AA00AA;	/* unlock */
-		base[FLASH_CYCLE2] = (u8) 0x00550055;	/* unlock */
-		base[FLASH_CYCLE1] = (u8) 0x00A000A0;	/* selects program mode */
-
-		*dest = data;	/* start programming the data */
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		start = get_timer(0);
-
-		/* data polling for D7 */
-		while (res == 0
-		       && (*dest & (u8) 0x00800080) !=
-		       (data & (u8) 0x00800080)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-				*dest = (u8) 0x00F000F0;	/* reset bank */
-				res = 1;
-			}
-		}
-
-		*dest++ = (u8) 0x00F000F0;	/* reset bank */
-		data >>= 8;
-	}
-
-	return (res);
-}
-
-void inline spin_wheel(void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
-
-#ifdef CFG_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect(flash_info_t * info, long sector, int prot)
-{
-	int rcode = 0;		/* assume success */
-	FPWV *addr;		/* address of sector */
-	FPW value;
-
-	addr = (FPWV *) (info->start[sector]);
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		*addr = (FPW) INTEL_RESET;	/* make sure in read mode */
-		*addr = (FPW) INTEL_LOCKBIT;	/* lock command setup */
-
-		if (prot)
-			*addr = (FPW) INTEL_PROTECT;	/* lock sector */
-		else
-			*addr = (FPW) INTEL_CONFIRM;	/* unlock sector */
-
-		/* now see if it really is locked/unlocked as requested */
-		*addr = (FPW) INTEL_READID;
-
-		/* read sector protection at sector address, (A7 .. A0) = 0x02.
-		 * D0 = 1 for each device if protected.
-		 * If at least one device is protected the sector is marked
-		 * protected, but return failure. Mixed protected and
-		 * unprotected devices within a sector should never happen.
-		 */
-		value = addr[2] & (FPW) INTEL_PROTECT;
-		if (value == 0)
-			info->protect[sector] = 0;
-		else if (value == (FPW) INTEL_PROTECT)
-			info->protect[sector] = 1;
-		else {
-			/* error, mixed protected and unprotected */
-			rcode = 1;
-			info->protect[sector] = 1;
-		}
-		if (info->protect[sector] != prot)
-			rcode = 1;	/* failed to protect/unprotect as requested */
-
-		/* reload all protection bits from hardware for now */
-		flash_sync_real_protect(info);
-		break;
-
-	default:
-		/* no hardware protect that we support */
-		info->protect[sector] = prot;
-		break;
-	}
-
-	return rcode;
-}
-#endif
-#endif
diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c
index 0480b5468..3c7b350aa 100644
--- a/board/freescale/m54455evb/m54455evb.c
+++ b/board/freescale/m54455evb/m54455evb.c
@@ -162,3 +162,53 @@ void pci_init_board(void)
 	pci_mcf5445x_init(&hose);
 }
 #endif				/* CONFIG_PCI */
+
+#if defined(CFG_FLASH_CFI)
+#include <flash.h>
+ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
+{
+	int sect[] = CFG_ATMEL_SECT;
+	int sectsz[] = CFG_ATMEL_SECTSZ;
+	int i, j, k;
+
+	if (base != CFG_ATMEL_BASE)
+		return 0;
+
+	info->flash_id          = 0x01000000;
+	info->portwidth         = 1;
+	info->chipwidth         = 1;
+	info->buffer_size       = 32;
+	info->erase_blk_tout    = 16384;
+	info->write_tout        = 2;
+	info->buffer_write_tout = 5;
+	info->vendor            = 2; /* CFI_CMDSET_AMD_STANDARD */
+	info->cmd_reset         = 0x00F0;
+	info->interface         = FLASH_CFI_X8;
+	info->legacy_unlock     = 0;
+	info->manufacturer_id   = (u16) ATM_MANUFACT;
+	info->device_id         = ATM_ID_LV040;
+	info->device_id2        = 0;
+
+	info->ext_addr          = 0;
+	info->cfi_version       = 0x3133;
+	info->cfi_offset        = 0x0055;
+	info->addr_unlock1      = 0x00000555;
+	info->addr_unlock2      = 0x000002AA;
+	info->name              = "CFI conformant";
+
+
+	info->size              = 0;
+	info->sector_count      = CFG_ATMEL_TOTALSECT;
+	info->start[0] = base;
+	for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) {
+		info->size += sect[i] * sectsz[i];
+
+		for (j = 0; j < sect[i]; j++, k++) {
+			info->start[k + 1] = info->start[k] + sectsz[i];
+			info->protect[k] = 0;
+		}
+	}
+
+	return 1;
+}
+#endif				/* CFG_FLASH_CFI */