| metadata: |
| name: sdcard-cold-boot |
| format: "Manual Test Definition 1.0" |
| description: "Test sd-card cold boot on Debian." |
| maintainer: |
| - amit.khare@linaro.org |
| os: |
| - debian |
| scope: |
| - functional |
| devices: |
| - hi6220-hikey |
| - apq8016-sbc |
| environment: |
| - manual-test |
| |
| run: |
| steps: |
| - Flash debian build. |
| - Make sure SD card is plugged before booting the board. |
| - Power on the board until boot up successfully. |
| - On terminal/serial console run: |
| - lsblk |
| - Check the name of SD card and mount it. |
| - sudo mount /dev/mmcblk0 /media/ |
| - cd /media |
| - ls |
| - cd .. |
| - umount /media |
| |
| expected: |
| - Output of "lsblk" should be similar to this. |
| NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT |
| sda 8:0 0 465.8G 0 disk |
| ├─sda1 8:1 0 1.5G 0 part |
| ├─sda2 8:2 0 116G 0 part |
| ├─sda4 8:4 0 1K 0 part |
| ├─sda5 8:5 0 38G 0 part [SWAP] |
| └─sda6 8:6 0 176.2G 0 part / |
| sr0 11:0 1 601.5M 0 rom |
| mmcblk0 179:0 0 7.5G 0 disk |
| └─mmcblk0p1 179:1 0 7.5G 0 part /media/40F0-07C2 |
| - SD card is mounted/unmounted and content of SD card shows up with "ls" command. |
| - No kernel panic or crash is observed on serial console. |