debian.linaro/changelog

linux-linaro-lt-mx5-3.1 (3.1.0-1001.6) natty; urgency=low

  * SAUCE: ENGR00158176 SGTL5000: I/O Error appeared when recording mono wav through HW
    - LP: #856933

  * SAUCE: mxc_spdif: spdif gets clock from spdif stream
    - LP: #880632

 -- Eric Miao <eric.miao@linaro.org>  Mon, 24 Oct 2011 21:16:26 +0800

linux-linaro-lt-mx5-3.1 (3.1.0-1001.5) natty; urgency=low

  * Updated configs - V4L2 output support supported
    - LP: #879316

  * SAUCE: mx53_loco: fix deadlock report from sdma_tx_submit() during boot
    - LP: #878701

 -- Eric Miao <eric.miao@linaro.org>  Fri, 21 Oct 2011 11:37:03 +0800

linux-linaro-lt-mx5-3.1 (3.1.0-1001.4) natty; urgency=low

  * CONFIG_USB_SUSPEND turned off, which is causing an oops during boot up
    - LP: #871322

  * SAUCE: fix imx_pcm_new() to allocate dma buffer correctly
    - LP: #877165

 -- Eric Miao <eric.miao@linaro.org>  Wed, 19 Oct 2011 14:49:00 +0800

linux-linaro-lt-mx5-3.1 (3.1.0-1001.3) natty; urgency=low

  * Fixed the build issue of previous ABI being missing

 -- Eric Miao <eric.miao@linaro.org>  Mon, 17 Oct 2011 21:36:50 +0800

linux-linaro-lt-mx5-3.1 (3.1.0-1001.2) natty; urgency=low

  * failed to build in oneiric ppa, change to release to natty as a workaround

 -- Eric Miao <eric.miao@linaro.org>  Mon, 17 Oct 2011 10:21:29 +0100

linux-linaro-lt-mx5-3.1 (3.1.0-1001.1) oneiric; urgency=low

  [ Upstream Kernel Changes ]

  * rebased to linux-linaro-3.1 v3.1-rc9

  [ Eric Miao ]

  * Forward ported the patches below

    - SAUCE: set correct rates before registering SPDIF codec DAI
    - SAUCE: adjust sgtl5000 and S/PDIF order
    - SAUCE: ENGR00139461-2 mxc alsa soc spdif driver
    - SAUCE: ENGR00139461-1 mxc alsa soc spdif driver
    - SAUCE: mx53loco: fix audio capture using SSI SYN mode
    - SAUCE: sgtl5000: fix power on/off of MIC bias

 -- Eric Miao <eric.miao@linaro.org>  Sun, 16 Oct 2011 16:02:17 +0800

linux-linaro-lt-mx5-3.1 (3.1.0-1000.0) oneiric; urgency=low

  * Added Ubuntu packaging from linux-linaro-oneiric for
    Freescale's LT 3.1 kernel

 -- Eric Miao <eric.miao@linaro.org>  Mon, 10 Oct 2011 17:12:31 +0800

linux-linaro (3.0.0-1007.11) natty; urgency=low

  [ John Rigby ]

  * SAUCE: ARM: OMAP: Overo: remove duplicate call to overo_ads7846_init()
    LP: #816004
  * LINARO: PACKAGING: Never rename dbgsym deb to ddeb

 -- John Rigby <john.rigby@linaro.org>  Tue, 27 Sep 2011 13:23:11 -0600

linux-linaro (3.0.0-1007.10) natty; urgency=low

  [ John Rigby ]

  * LINARO: DEBUG: Only rename debug symbol deb for primary archive

 -- John Rigby <john.rigby@linaro.org>  Mon, 26 Sep 2011 18:57:19 -0600

linux-linaro (3.0.0-1007.9) oneiric; urgency=low

  [ John Rigby ]

  * Enable crypto modules and remove crypto-modules from
    exclude-module files
    LP: #826021

 -- John Rigby <john.rigby@linaro.org>  Mon, 26 Sep 2011 10:44:23 -0600

linux-linaro (3.0.0-1006.8) natty; urgency=low

  [ John Rigby ]

  * Bump ABI
  * Rebase on linux-linaro-3.0-2011.09-0
  * LINARO: CONFIG: Enable CONFIG_RELAY
  * LINARO: always build debug packages
  * LINARO: PACKAGING: add .gnu_debuglink sections to .ko files

 -- John Rigby <john.rigby@linaro.org>  Fri, 23 Sep 2011 20:33:58 -0600

linux-linaro (3.0.0-1005.7) natty; urgency=low

  [ John Rigby ]

  * Bump ABI
  * New upstreams
    - Ubuntu 3.0.0-11.17 which the final kernel for prior to Ubuntu 11.10
    rebased on
    - 12Sep2011 snapshot of linux-linaro-3.0
    merged with
    - upstream v3.0.4 (because that is what the Ubuntu release is based on)
      LP: #709245
  * Unified configs with wifi configs from Robert Nelson added in
  * Configs seeds and scripts but the build system does not yet use them
  * OMAP3 audio fix from Mans Rullgard
    LP: #760919
  * Workaround a cross build failure with latest toolchain

 -- John Rigby <john.rigby@linaro.org>  Mon, 12 Sep 2011 13:36:56 -0600

linux-linaro (3.0.0-1004.6) natty; urgency=low

  [ John Rigby ]

  * LINARO: CONFIG: Enable CONFIG_LBDAF
    - LP: #824545

 -- John Rigby <john.rigby@linaro.org>  Wed, 24 Aug 2011 09:36:17 -0600

linux-linaro (3.0.0-1004.5) natty; urgency=low

  [ John Rigby ]

  * Rebase on linux-linaro-3.0-2011.08-0
  * LINARO: CONFIG: Enable SMSC95XX
    - LP: #830785
  * LINARO: CONFIG: Fix mx5 MMC_SDHCI config settings
  * LINARO: fix cross compiling of tools
  * LINARO: New shared flavour for arch headers and tools

 -- John Rigby <john.rigby@linaro.org>  Sun, 21 Aug 2011 22:20:20 -0600

linux-linaro (3.0.0-1003.4) natty; urgency=low

  [ John Rigby ]
  * LINARO: CONFIG: Enable basic profiling and tracing options
    - LP: #764796
  * LINARO: CONFIG: Enable EXT3 and EXT4 for all flavours
    - LP: #822593

 -- John Rigby <john.rigby@linaro.org>  Mon, 08 Aug 2011 12:15:28 -0600

linux-linaro (3.0.0-1002.3) natty; urgency=low

  [ John Rigby ]

  * LINARO: SAUCE: NO-UP: workaround mx51 build error
  * LINARO: CONFIG: Turn on CONFIG_HIGHMEM

 -- John Rigby <john.rigby@linaro.org>  Thu, 28 Jul 2011 17:05:03 -0600

linux-linaro (3.0.0-1002.2) natty; urgency=low

  [ Ricardo Salveti ]

  * LINARO: CONFIG: Enabling tracing and profiling to work with ARM DS-5
  * LINARO: CONFIG: MMC_SDHCI=y for MX51
  * LINARO: CONFIG: Enabling WL12XX for Omap

 -- John Rigby <john.rigby@linaro.org>  Thu, 28 Jul 2011 10:58:12 -0600

linux-linaro (3.0.0-1001.1) natty; urgency=low

  [ John Rigby ]

  * Rebase to linux-linaro-3.0-2011.07-1
  * LINARO: CONFIG: Enable CONFIG_OMAP2_DSS_VENC

  [ Ricardo Salveti ]

  * LINARO: CONFIG: Enable CONFIG_USB_NET_SMSC95XX=m for Omap
  * LINARO: CONFIG: enabling LED support for omap

 -- John Rigby <john.rigby@linaro.org>  Mon, 25 Jul 2011 14:58:08 -0600

linux-linaro (3.0.0-1000.0) natty; urgency=low

  [ John Rigby ]

  * New 3.0.0 based release
    linux-linaro-3.0-2011.07-0 
    Ubuntu-3.0.0-6.7 commits played on top
    debian.linaro from linux-linaro-2.6.39-1001.2
  * CONFIG: Enable SCHED_MC and SCHED_SMT 

 -- John Rigby <john.rigby@linaro.org>  Fri, 22 Jul 2011 00:11:56 -0600

linux-linaro (2.6.39-1001.2) oneiric; urgency=low

  [ John Rigby ]

  * Rebase on linaro-linux-2.6.39-upstream-23Jun2011
  * Bump ABI
  * update configs after rebase
  * CONFIG: Disable OMAP2 to allow THUMB2_KERNEL
  * CONFIG: Update omap config based on upstream omap4_defconfig
  * Rebase to linux-linaro-2.6.39-2011.06-0

 -- John Rigby <john.rigby@linaro.org>  Sun, 26 Jun 2011 18:47:45 +0100

linux-linaro (2.6.39-1000.1) oneiric; urgency=low

  [ John Rigby ]

  * Reenable building of dtb's

 -- John Rigby <john.rigby@linaro.org>  Wed, 22 Jun 2011 07:22:49 -0600

linux-linaro (2.6.39-1000.0) oneiric; urgency=low

  [ John Rigby ]

  * Start Oneiric
  * First 2.6.39 release based on
    linaro-linux-2.6.39-upstream-21Jun2011
    Ubuntu-2.6.39-3.10
  * Minimal configs based on upstream defconfigs plus
    additional options to satisfy enforce script 

 -- John Rigby <john.rigby@linaro.org>  Tue, 21 Jun 2011 13:45:49 -0600

linux-linaro (2.6.38-1003.4) natty; urgency=low

  [ Avik Sil ]

    arm: pmu: support pmu/perf on OMAP4
    - LP: #702999

  [ Ian Multon ]
    OMAP: Fix non-combined OMAP3+OMAP4 builds

  [ Ricardo Salveti ]

    OMAP4 DRM support:
      ARM: OMAP4: Remove extra instance of omap_dss_device
      OMAP: DSS2: HDMI: Adding get_edid callback support
      OMAP: DSS2: HDMI: Adding is_detected callback support
      OMAP: DSS: HDMI: tame hdmi driver
      DRM: OMAP: Add HDMI support
      OMAP: DSS2: adding force argument to is_detected()
      OMAP4: DSS2: HDMI: adding a workaround for LG monitors
      OMAP: DSS2: Avoid enabling panel if none is around
      OMAP: I2C: "controller timed out" message should use dev_warn
      OMAP: devices: register first the drm omap device, and then the SGX one
      OMAP4: DSS: HDMI: increasing msleep value for the detect workaround
      OMAP: DRM: Using same numbers of CRTCS and PIPES for OMAP 3 and 4
      DRM: OMAP: Fixing PVR kernel module name
      OMAP2: DSS: HDMI: removing error msg from check_timing
      LINARO: CONFIG: enable CONFIG_PREEMPT for OMAP as needed for SGX
    LINARO: CONFIG: Enabling WL12XX
    LINARO: CONFIG: Changing CONFIG_LEDS_TRIGGER_HEARTBEAT from module to built-in
    DRM: OMAP: replace request_module with request_module_nowait

  [ John Rigby ]

  * Rebase to new upstreams:
    Linux v2.6.38.3
    linaro-linux-2.6.38-upstream-20Apr2011
    Ubuntu-2.6.38-8.42
    And temporarily:
      testbranch from linaro-linux-2.6.38 until it is merge upstream
      and enable CONFIG_DRM for omap
    - LP: #725252
    Enable profiling related CONFIG options:
      CONFIG_PROFILING=y
      CONFIG_PERF_EVENTS=y
      CONFIG_HW_PERF_EVENTS=y
      CONFIG_FTRACE=y
      CONFIG_ENABLE_DEFAULT_TRACERS=y
      CONFIG_HIGH_RES_TIMERS=y
  * Rebase to linaro-linux-2.6.38-upstream-26Apr2011
  * Rebase to linaro-linux-2.6.38 as of 3May2011
      master and testing merged. 
  * Enable MUSB related CONFIG options for OMAP:
      CONFIG_USB_MUSB_HDRC=y
      CONFIG_USB_MUSB_OMAP2PLUS=y
      CONFIG_USB_MUSB_OTG=y
      CONFIG_USB_GADGET_MUSB_HDRC=y
      CONFIG_USB_MUSB_HDRC_HCD=y
      CONFIG_USB_INVENTRA_DMA=y
      CONFIG_USB_MUSB_DEBUG=y
    - LP: #730698
  * Disable CPU_FREQ for omap because of stability issues 
  * Rebase to linaro-linux-2.6.38-upstream-17May2011 
      Has all the OMAP4 display fixes from rsalveti so those
      have been removed from Linaro patch series.
  * Rebase to linux-linux-2.6.38-upstream-23May2011
      Which is includes upstream stable release v2.6.38.7
  * Enable HIGHMEM for OMAP
  * Disable WL12XX
      Breaks all networking in current state
  * Rebase on final linux-linux-2.6.38 linaro-11.05-2.6.38
  * Fix provides to provide linux-image, linux-headers etc.
    - LP: #786829

  [ Upstream Fixes ]

  * WARN_ON_SMP(): Allow use in if() statements on UP
  * futex: Fix WARN_ON() test for UP

 -- John Rigby <john.rigby@linaro.org>  Fri, 27 May 2011 18:53:05 -0600

linux-linaro (2.6.38-1002.3) natty; urgency=low

  [ Upstream Fixes ]

  * MUSB: shutdown: Make sure block is awake before doing shutdown
    - LP: #745737
  * Fixed gpio polarity of gpio USB-phy reset.
    - LP: #747639

  [ Andy Green ]

  * LINARO: SAUCE: disable CONFIG_OMAP_RESET_CLOCKS
    - LP: #752900

  [ John Rigby ]

  * Rebase to new upstreams:
    Linux v2.6.38.1
    linaro-linux-2.6.38-upstream-29Mar2011
    Ubuntu-2.6.38-7.35
  * SAUCE: OMAP4: clock: wait for module to become accessible on
    a clk enable
    - LP: #745737
  * Rebase to new upstreams:
    Linux v2.6.38.2
    linaro-linux-2.6.38-upstream-5Apr2011
    Ubuntu-2.6.38-8.41
    - LP: #732842
  * Update configs for device tree, dvfs and lttng
  * LINARO: add building of dtb's
  * LINARO: SAUCE: Disable lowest operating freqs on omap34xx
    - LP: #732912

 -- John Rigby <john.rigby@linaro.org>  Thu, 14 Apr 2011 12:16:06 -0600

linux-linaro (2.6.38-1001.2) natty; urgency=low

  [ John Rigby ]

  * Rebase to new upstreams:
    Linux v2.6.38-rc6 -- same
    linaro-linux-2.6.38-upstream-1Mar2011 -- new
    Ubuntu-2.6.38-5.32 -- same
    - LP: #724377
  * Enable CONFIG_THUMB2_KERNEL for OMAP[34]
  * Bump ABI
  * Rebase to new upstreams:
    Linux v2.6.38-rc7
    linaro-linux-2.6.38-upstream-4Mar2011
    ubuntu-natty master-next as of 4Mar2011
  * Re-enable display on OMAP4
  * Disable CONFIG_OMAP2_DSS_SDI
    - LP: #728603
    - LP: #720055
  * Rebase to new upstreams:
    Linux v2.6.38-rc8
    linaro-linux-2.6.38-upstream-9Mar2011
      rebased to 2.6.38-rc8
  * Remove generated file kernel-versions and sort kernel-versions.in
  * Enable CONFIG_TIMER_STATS
    - LP: #718677
  * Rebase to new upstreams:
    Linux v2.6.38 final
    linaro-linux-2.6.38-upstream-16Mar2011
    - LP: #708883
    - LP: #723159
    ubuntu-natty Ubuntu-2.6.38-7.35
  * Enable CONFIG_IP_PNP and CONFIG_ROOT_NFS for all flavours
    - LP: #736429
  * mach-ux500: fix build error
    workaround a problem in linux-linaro-2.6.38
  * OMAP4:Fix -EINVAL for vana, vcxio, vdac
    from omap-linux mailing list pending ack
  * turn off ROOT_NFS for mx51
    it makes the kernel too large to boot with current hwpack settings

 -- John Rigby <john.rigby@linaro.org>  Fri, 18 Mar 2011 07:36:33 -0600

linux-linaro (2.6.38-1000.1) natty; urgency=low

  * Rebase to new upstreams:
    Linux v2.6.38-rc5
    linaro-linux-2.6.38-upstream-22Feb2011
    Ubuntu-2.6.38-4.31
  * Enforce CONFIG_PM_ADVANCED_DEBUG for all flavours
    - LP: #713075
  * Temporarily disable display on OMAP4
  * Rebase to new upstreams:
    Linux v2.6.38-rc6
    linaro-linux-2.6.38-upstream-23Feb2011
    Ubuntu-2.6.38-5.32
  * OMAP4: enable smc instructions in  arch/arm/mach-omap2/sleep34xx.S
  * Disable CONFIG_BINFMT_AOUT for OMAP
    Now consistent with other platforms

 -- John Rigby <john.rigby@linaro.org>  Wed, 23 Feb 2011 16:57:41 -0700

linux-linaro (2.6.37-1003.6) natty; urgency=low

  [ John Rigby ]

  * Rebase to new upstreams:
    linaro-linux-2.6.37-upstream-24Jan2011
    Ubuntu-2.6.37-12.26
       Skipping because of conflicting upstream patches:
         ARM: stack protector: change the canary value per task
         Revert "ARM: stack protector: change the canary value per task"
         UBUNTU: SAUCE: ARM: OMAP: Beagle: support twl gpio differences on xM
  * Add U8500 flavour
  * Rebase to linaro-linux-2.6.37-upstream-27Jan2011
  * Fix Ubuntu upstream version number typo
  * Rebase to linaro-linux-2.6.37-upstream-31Jan2011
  * Rebase to linaro-linux-2.6.37-upstream-08Feb2011
  * Enforce CONFIG_PRINTK_TIME for all flavours
    - LP: #715576
  * Fix package control file to indicate that OMAP4 is supported
    - LP: #714590
  * Enforce CONFIG_PM_DEBUG for all flavours
    - LP: #713075
  * Add s5pv310 flavour
  * enable and enforce CONFIG_BTRFS_FS for all flavours
    - LP: #715835
  * Rebase to linaro-linux-2.6.37-upstream-10Feb2011
    - LP: #707038
  * Add config cleanup and automatic tmp branch creation to mkflavourbranches

 -- John Rigby <john.rigby@linaro.org>  Tue, 08 Feb 2011 19:56:22 -0700

linux-linaro (2.6.37-1002.5) natty; urgency=low

  [ John Rigby ]

  * rebase to new upstreams:
    v2.6.37 final
    Ubuntu-2.6.37-12.26
  * Clean up lintian errors and warnings
    - LP: #697317

 -- John Rigby <john.rigby@linaro.org>  Sat, 08 Jan 2011 18:34:41 -0700

linux-linaro (2.6.37-1001.4) natty; urgency=low

  [ John Rigby ]

  * rebase to new upstreams:
    snapshot of linux-linaro-2.6.36 13Dec2010
    revert 2.6.36.1
    merge v2.6.37-rc4
    rebase Ubuntu-2.6.37-8.21 onto the result
  * LINARO: update configs
    enable CONFIG_SWAP, CONFIG_POSIX_MQUEUES, CONFIG_PERF_EVENTS

 -- John Rigby <john.rigby@linaro.org>  Mon, 13 Dec 2010 16:51:19 -0700

linux-linaro (2.6.37-1000.3) natty; urgency=low

  [ John Rigby ]

  * LINARO: no build-depends-indep for now
  * LINARO: Fix problems with naming of flavour independent debs
  * OMAP4: enable smc instruction in new assembler versions

 -- John Rigby <john.rigby@linaro.org>  Wed, 01 Dec 2010 01:07:18 -0700

linux-linaro (2.6.37-1000.2) natty; urgency=low

  [ John Rigby ]

  * fix problems with source package per flavour building

 -- John Rigby <john.rigby@linaro.org>  Tue, 30 Nov 2010 01:00:49 -0700

linux-linaro (2.6.37-1000.1) natty; urgency=low

  [ John Rigby ]

  * rebase to new upstreams:
    snapshot of linux-linaro-2.6.36 24Nov2010
    minus commits from 2.6.36.1 merge
    merged with upstream v2.6.37-rc3
    plus sauce and packaging from Ubuntu-2.6.37-7.18
    all but three commits applied cleanly
    Fixed:
        UBUNTU: SAUCE: omap: remove calls to usb_nop_xceiv_register from board files
    Dropped:
        ARM: stack protector: change the canary value per task
        Revert "ARM: stack protector: change the canary value per task"
            after merge conflict was resolved the commit ended up being no change
            so the effect was to drop these

 -- John Rigby <john.rigby@linaro.org>  Fri, 26 Nov 2010 14:20:09 -0700

linux-linaro (2.6.36-1000.1) natty; urgency=low

  [ John Rigby ]

  * First 2.6.36 release based on:
    linux-linaro-2.6.36 snapshot of 16Nov2010
      Note: this is core 2.6.36 plus ARM related from 2.6.37

    Ubuntu 2.6.37-5.13 packaging and sauce
      All Ubuntu patches applied cleanly or cleanly after fixes
      with the following exceptions.  See linaro-dropped.txt for details:

      These are not needed because these already are in linux-linaro-2.6.36:
        ARM: stack protector: change the canary value per task
        Revert "ARM: stack protector: change the canary value per task"

      These were not applied because ...:
        UBUNTU: SAUCE: fix documentation strings for struct input_keymap_entry
          This patch does not seem to patch any code that exists in linux-linaro-2.6.36
          For that matter it doesn't do what the description says even in Ubuntu
        mmap randomization for executable mappings on 32-bit
          Not a trivial merge failure, wait for linux-linaro-2.6.37 for this
        Fix userspace build of linux/fs.h
          patches a section of file that does not exist in 2.6.36
        UBUNTU: ubuntu: AUFS -- track changes to work queue initialisation
          change that makes this patch necessary is not in 2.6.36

    Linaro packaging

 -- John Rigby <john.rigby@linaro.org>  Thu, 18 Nov 2010 15:23:03 -0700

linux-linaro (2.6.35-1008.15) maverick-proposed; urgency=low

  [ Robert Nelson ]

  * SRU: Fix DVI for Beagle xM rev A3
    - LP: #663642

 -- John Rigby <john.rigby@linaro.org>  Thu, 21 Oct 2010 11:01:14 -0600

linux-linaro (2.6.35-1008.14) maverick-proposed; urgency=low

  [ Andy Whitcroft ]

  * reduce disk usage during buildd builds
    - LP: #645653

  [ Enric Balletbo i Serra ]

  * ARM: igepv2: Adding support for VBUS and overcurrent
    - LP: #651589
  * ARM: igepv2: Fix and improve LED handling
    - LP: #654582
  * ARM: igepv2: Introduce function to dectect HW version
    - LP: #654586
  * ARM: igepv2: Fix handling of GPIOs for WLAN-BT combo
    - LP: #654590
  * ARM: igepv2: Add i2c eeprom driver to read EDID
    - LP: #654594
  * ARM: igepv2: Remove VMMC2 regulator
    - LP: #654595

  [ Maurus Cuelenaere ]

  * SAUCE: ARM: OMAP3: Add S-Video output to IGEPv2 board
    - LP: #607250

  [ Upstream Stable ]
  * Linux 2.6.35.7

  [ Upstream MMC updates ]

  * mmc: recognize CSD structure
  * mmc: split mmc_sd_init_card()
  * mmc: implement SD-combo (IO+mem) support
  * sdhci: remove useless set_clock() check
  * sdhci: 8-bit data transfer width support
  * sdhci: don't assign mmc->caps at SDHCI directly
  * mmc: only set blockaddressed for > 2GiB cards
  * mmc: omap: fix for bus width which improves SD card's peformance.
  * sdhci-pltfm: switch to module device table matching
  * sdhci-pltfm: reorganize Makefile entries to support SoC devices
  * sdhci-pltfm: add support for CNS3xxx SoC devices
  * omap hsmmc: fix processing of all dma interrupts as block completion
  * sdhci: add regulator support
  * sdhci: add no hi-speed bit quirk support
  * mmc: avoid getting CID on SDIO-only cards
  * omap_hsmmc: remove unused local `state'
  * omap hsmmc: fix a racing case between kmmcd and omap_hsmmc_suspend
  * drivers/mmc/host/imxmmc.c: adjust confusing if indentation
  * mmc: sdhci-pltfm: Add structure for host-specific data
  * mmc: sdhci-pltfm: move .h file into appropriate subdir
  * mmc: sdhci: introduce get_ro private write-protect hook
  * mmc: sdhci_pltfm: pass more data on custom init call
  * mmc: sdhci-of-esdhc: factor out common stuff
  * mmc: sdhci-pltfm: add -pltfm driver for imx35/51
  * mmc: quirk fix for timeout problem
  * babbage: esdhc device registration
  * babbage: update mx51_defconfig
    - LP: #656966


  [ Upstream ARM fixes ]

  * Make PTRACE_SINGLESTEP work with user helpers
  * ARM: fix section mismatch warnings in Versatile Express
  * ARM: use memblock to remove memory from available memory
  * video: omap: vram: remove from normal memory
    - LP: #627779

  [ John Rigby ]
  * LINARO: update configs
    - LP: #659799

 -- John Rigby <john.rigby@linaro.org>  Tue, 19 Oct 2010 16:09:52 -0600

linux-linaro (2.6.35-1007.13) maverick; urgency=low

  [ Upstream Ubuntu ]

  * Ubuntu-2.6.35-22.33
  * Ubuntu-2.6.35-22.34

  [ Upstream ARM Fixes ]

  * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
  * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
  * ARM: add a vma entry for the user accessible vector page
  * ARM: plug a race with the alignment trap handler
  * arm: fix really nasty sigreturn bug
  * ARM: prevent multiple syscall restarts
  * ARM: 6387/1: errata: check primary part ID in proc-v7.S
  * ARM: 6388/1: errata: DMB operation may be faulty
  * ARM: 6389/1: errata: incorrect hazard handling in the SCU may lead to
    data corruption
  * ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
  * kconfig: delay symbol direct dependency initialization
  * ARM: kprobes-decode: add support for MOVW instruction
  * ARM: errata: check primary part ID in proc-v7.S
  * ARM: errata: DMB operation may be faulty
  * ARM: errata: incorrect hazard handling in the SCU may lead to data
    corruption
  * ARM: errata: faulty hazard checking in the Store Buffer may lead to
    data corruption
  * ARM: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9

  [ Ricardo Salveti ]
  * ARM: OMAP3: Add S-Video output to IGEPv2 board
    - LP: #607250
  * ARM: OMAP3: Adding vdd_sdi regulator supply to IGEPv2 board
    - LP: #607250

  [ Upstream Stable Releases ]
  * 2.6.35.5
  * 2.6.35.6

  [ Upstream ftrace support ]

  * ARM: 6312/1: ftrace: allow building without frame pointers
  * ARM: 6314/1: ftrace: allow build without frame pointers on ARM
  * ARM: 6315/1: ftrace: add ENDPROC annotations
  * ARM: 6316/1: ftrace: add Thumb-2 support
  * ARM: 6317/1: ftrace: pass KBUILD_CFLAGS to record_mcount.pl
  * ARM: 6318/1: ftrace: fix and update dynamic ftrace
  * ARM: 6319/1: ftrace: add Thumb-2 support to dynamic ftrace
  * ARM: 6320/1: ftrace: enable dynamic ftrace

  [ Nicolas Pitre ]

  * ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via
    /dev/mem
  * ARM: bring SECCOMP behavior in sync with the version in mainline
  * ARM: do not define VMALLOC_END relative to PAGE_OFFSET

  [ John Rigby ]

  * LINARO: Start new release
  * LINARO: Bump ABI
  * LINARO: update configs

 -- John Rigby <john.rigby@linaro.org>  Thu, 07 Oct 2010 17:58:05 -0600

linux-linaro (2.6.35-1006.12) maverick; urgency=low

  [ John Rigby ]

  * Revert "LINARO: [Config] workaround for kernel-wedge error on empty
    udebs"
  * LINARO: Start new release
  * LINARO: no mouse-modules for linaro-vexpress
  * LINARO: Add tools section to debian.linaro/control.stub.in
    - LP: #643462

 -- John Rigby <john.rigby@linaro.org>  Mon, 20 Sep 2010 10:20:21 -0600

linux-linaro (2.6.35-1006.11) maverick; urgency=low

  [ Upstream Kernel Changes ]

  * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
    - LP: #633417
  * ARM: add a vma entry for the user accessible vector page
  * ARM: plug a race with the alignment trap handler
  * ARM: SECCOMP support

  [ John Rigby ]

  * LINARO: rebase on linux-linaro-2.6.35-16Sep2010 and Ubuntu-2.6.35-22.32 merge
  * LINARO: [CONFIG] igep ethernet fix
  * LINARO: [CONFIG] turn do_tools on
    - LP: #618734

 -- John Rigby <john.rigby@linaro.org>  Thu, 16 Sep 2010 18:03:14 -0600

linux-linaro (2.6.35-1005.10) maverick; urgency=low

  [ Upstream Kernel Changes ]

  * mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=y

  [ John Rigby ]

  * LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-20.29 merge
  * LINARO: [Config] Turn on CONFIG_HIGHMEM for vexpress
  * LINARO: Update Vcs-Git
  * LINARO: add Recommends uboot-mkimage
    - LP: #628848

 -- John Rigby <john.rigby@linaro.org>  Wed, 08 Sep 2010 10:03:22 -0600

linux-linaro (2.6.35-1004.9) maverick; urgency=low

  [ Upstream Kernel Changes ]

  * ARM: OMAP: Beagle: revision detection
    - LP: #613855
  * ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect
    - LP: #613855
  * ARM: OMAP: Beagle: no gpio_wp pin connection on xM
    - LP: #613855
  * OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings
    - LP: #624115

 -- John Rigby <john.rigby@linaro.org>  Fri, 27 Aug 2010 20:27:29 -0600

linux-linaro (2.6.35-1004.8) maverick; urgency=low

  [ John Rigby ]

  * LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-19.25 merge

 -- John Rigby <john.rigby@linaro.org>  Wed, 25 Aug 2010 19:46:17 -0600

linux-linaro (2.6.35-1003.7) maverick; urgency=low

  [ John Rigby ]

  * LINARO: [Config] Fix vexpress config
  * LINARO: [Config] Add mx51 flavour
  * LINARO: [config] Update vexpress config
     Enable USB mass storage as a module
     Enable SCSI disk support

 -- John Rigby <john.rigby@linaro.org>  Sun, 22 Aug 2010 21:29:44 -0600

linux-linaro (2.6.35-1002.6) maverick; urgency=low

  [ Tim Gardner ]

  * [Config] Find ABI files according to their source package name
  * [Config] getabi: Only get armel omap and vexpress

  [ John Rigby ]

  * [Config] Changed flavour names from {omap,vexpress} to
    linaro-{omap,vexpress}

 --  Tim Gardner <tim.gardner@canonical.com>  Tue, 17 Aug 2010 15:57:51 +0100

linux-linaro (2.6.35-1001.5) maverick; urgency=low

  * New upstream trees

    Merge of linaro_merge_100811 and Ubuntu-2.6.35-15.21

    Conflicts:
        arch/arm/mach-omap2/board-4430sdp.c

            linaro_merge_100811 added sdp4430_leds_gpio to sdp4030_devices
            Ubuntu 2.6.35-15.21 added sdp4430_nop_usb_device to sdp4030_devices

            resolution was to just add both

  * Fold in packaging from 2.6.35-1000.4
  * [Config] Update configs for new upstream
  * omap3 nand: fix missing parameter to gpmc_prefetch_reset

 -- John Rigby <john.rigby@linaro.org>  Wed, 11 Aug 2010 14:20:28 -0600

linux-linaro (2.6.35-1000.4) maverick; urgency=low

  [ John Rigby ]

  * LINARO: replace debian.master with debian.linaro
  * LINARO: Add vexpress flavour

 -- John Rigby <john.rigby@linaro.org>  Tue, 10 Aug 2010 10:23:30 -0600

linux-linaro (2.6.35-1000.3) maverick; urgency=low

  [ John Rigby ]

  * LINARO: cleanup debian.linaro control file

 -- John Rigby <john.rigby@linaro.org>  Tue, 03 Aug 2010 10:16:29 -0600

linux-linaro (2.6.35-1000.2) maverick; urgency=low

  [ John Rigby ]

  * Bump upload number to workaround launchpad upload rejection

 -- John Rigby <john.rigby@linaro.org>  Wed, 28 Jul 2010 11:20:13 -0600

linux-linaro (2.6.35-1000.1) maverick; urgency=low

  [ Linaro Kernel Changes ]

  * Turn off CONFIG_SPARSE_IRQ

 -- John Rigby <john.rigby@linaro.org>  Tue, 27 Jul 2010 17:17:39 -0600

linux-linaro (2.6.35-1000.0) maverick; urgency=low

  [ John Rigby ]

  * Initial Linaro linux tree

 -- John Rigby <john.rigby@linaro.org>  Tue, 27 Jul 2010 11:34:30 -0600