blob: 71dfb0424baa1fa9b5ccfe45dc053778dd268cad [file] [log] [blame]
Eric Miao9858ff42011-11-28 12:45:56 +08001linux-linaro-lt-mx5-3.1 (3.1.0-1002.10) UNRELEASED; urgency=low
2
3 CHANGELOG: Do not edit directly. Autogenerated at release.
4 CHANGELOG: Use the printchanges target to see the curent changes.
5 CHANGELOG: Use the insertchanges target to create the final log.
6
7 -- Eric Miao <eric.miao@linaro.org> Mon, 28 Nov 2011 12:45:09 +0800
8
Eric Miaoa2d979b2011-11-23 22:49:05 +08009linux-linaro-lt-mx5-3.1 (3.1.0-1002.9) natty; urgency=low
Eric Miaoef9c8152011-11-22 20:43:02 +080010
Eric Miaoa2d979b2011-11-23 22:49:05 +080011 * LINARO: update configs and add back SATA support
12 - LP: #893233
13
14 * LINARO: update config - CONFIG_MMC_UNSAFE_RESUME=y
15 * SAUCE: remove unnecessary suspend/resume functions from mxc_spdif
16 * SAUCE: skip resume soc-audio device without codecs
17 - LP: #882723
Eric Miaoef9c8152011-11-22 20:43:02 +080018
19 -- Eric Miao <eric.miao@linaro.org> Tue, 22 Nov 2011 20:42:14 +0800
20
Eric Miaocfd85212011-11-16 23:08:49 +080021linux-linaro-lt-mx5-3.1 (3.1.0-1002.8) natty; urgency=low
Eric Miao66d359b2011-11-16 22:58:02 +080022
Eric Miaocfd85212011-11-16 23:08:49 +080023 [Jason Chen]
24 * mxc edid: remove test edid data
25 - LP: #880937
26
27 [ Merged updated 'ipu' branch from Jason Chen ]
28 * ENGR00162218 mxc_vout: put set position function before set var
29 * ENGR00162208 ipuv3 device: fix jitter issue of split mode
30 * ENGR00162206 mxc_vout: resize output crop on-the-fly
31 * ENGR00162064 mxc v4l2 output: check ipu task in S_CROP ioctl
32 * ENGR00161948 mxc v4l2 output: fix case of input crop with xoffset
33 * ENGR00161845 mxc v4l2 output: add check of S_CROP width and height
34 * ENGR00161315 IPUv3 fix VDIC split line between up/down stripe
35 * ENGR00161607 mxc v4l2 output: return real phys offset after mmap
36 * ENGR00161526 mxc v4l2 output: 720p ic bypass output may failed in block
37 * ENGR00160878-2 mxc v4l2 output: new mxc v4l2 output driver based on videobuf
38 * ENGR00160878-1 mxc v4l2 output: new mxc v4l2 output driver based on videobuf
39 * ENGR00160877 ipuv3: pm method change
40 * ENGR00160876 videobuf: add timestamp for user point buffer
41 * ENGR00160875-3 ipuv3 dev: low performance if enable rotation
42 * ENGR00160875-2 ipuv3 dev: low performance if enable rotation
43 * ENGR00160875-1 ipuv3 dev: low performance if enable rotation
44 * ENGR00160626 fix system hang when ipu clk get rate
45 * ENGR00158456-2 ipuv3 dev: return error for split mode with rotation
46 * ENGR00158456-1 ipuv3 dev: return error for split mode with rotation
47 - LP: #891012
Eric Miao66d359b2011-11-16 22:58:02 +080048
49 -- Eric Miao <eric.miao@linaro.org> Wed, 16 Nov 2011 22:57:37 +0800
50
Eric Miao8f85ac52011-11-15 20:15:35 +080051linux-linaro-lt-mx5-3.1 (3.1.0-1002.7) natty; urgency=low
Eric Miao45a72e72011-11-15 17:20:27 +080052
Eric Miao1ead1eb2011-11-15 20:12:47 +080053 [ Upstream Kernel Changes ]
54 * Rebased to linux-linaro-3.1-2011.11-0
Eric Miao45a72e72011-11-15 17:20:27 +080055
Eric Miao8f85ac52011-11-15 20:15:35 +080056 [ Eric Miao ]
57 * SAUCE: fix oops caused by cpuidle
58 - LP: #890578
59
Eric Miao45a72e72011-11-15 17:20:27 +080060 -- Eric Miao <eric.miao@linaro.org> Tue, 15 Nov 2011 17:19:57 +0800
61
Eric Miao7bc60cb2011-10-24 21:20:12 +080062linux-linaro-lt-mx5-3.1 (3.1.0-1001.6) natty; urgency=low
Eric Miao6f7ce3c2011-10-24 21:16:56 +080063
Eric Miao7bc60cb2011-10-24 21:20:12 +080064 * SAUCE: ENGR00158176 SGTL5000: I/O Error appeared when recording mono wav through HW
65 - LP: #856933
66
67 * SAUCE: mxc_spdif: spdif gets clock from spdif stream
68 - LP: #880632
Eric Miao6f7ce3c2011-10-24 21:16:56 +080069
70 -- Eric Miao <eric.miao@linaro.org> Mon, 24 Oct 2011 21:16:26 +0800
71
Eric Miaoe38d97d2011-10-22 09:24:05 +080072linux-linaro-lt-mx5-3.1 (3.1.0-1001.5) natty; urgency=low
Eric Miao8bed4dd2011-10-21 11:37:45 +080073
Eric Miaoe38d97d2011-10-22 09:24:05 +080074 * Updated configs - V4L2 output support supported
75 - LP: #879316
76
77 * SAUCE: mx53_loco: fix deadlock report from sdma_tx_submit() during boot
78 - LP: #878701
Eric Miao8bed4dd2011-10-21 11:37:45 +080079
80 -- Eric Miao <eric.miao@linaro.org> Fri, 21 Oct 2011 11:37:03 +0800
81
Eric Miaod46faa52011-10-19 20:39:07 +080082linux-linaro-lt-mx5-3.1 (3.1.0-1001.4) natty; urgency=low
Eric Miaoc3927232011-10-19 14:49:46 +080083
Eric Miaod46faa52011-10-19 20:39:07 +080084 * CONFIG_USB_SUSPEND turned off, which is causing an oops during boot up
85 - LP: #871322
86
87 * SAUCE: fix imx_pcm_new() to allocate dma buffer correctly
88 - LP: #877165
Eric Miaoc3927232011-10-19 14:49:46 +080089
90 -- Eric Miao <eric.miao@linaro.org> Wed, 19 Oct 2011 14:49:00 +0800
91
Eric Miaodac6deb2011-10-17 21:37:35 +080092linux-linaro-lt-mx5-3.1 (3.1.0-1001.3) natty; urgency=low
93
94 * Fixed the build issue of previous ABI being missing
95
96 -- Eric Miao <eric.miao@linaro.org> Mon, 17 Oct 2011 21:36:50 +0800
97
Eric Miaodf072172011-10-17 10:34:40 +010098linux-linaro-lt-mx5-3.1 (3.1.0-1001.2) natty; urgency=low
99
100 * failed to build in oneiric ppa, change to release to natty as a workaround
101
102 -- Eric Miao <eric.miao@linaro.org> Mon, 17 Oct 2011 10:21:29 +0100
103
Eric Miao9ca860c2011-10-16 16:22:34 +0800104linux-linaro-lt-mx5-3.1 (3.1.0-1001.1) oneiric; urgency=low
Eric Miaob4700ab2011-10-16 16:03:03 +0800105
Eric Miaoba21a772011-10-16 16:16:32 +0800106 [ Upstream Kernel Changes ]
107
108 * rebased to linux-linaro-3.1 v3.1-rc9
109
Eric Miao9ca860c2011-10-16 16:22:34 +0800110 [ Eric Miao ]
111
112 * Forward ported the patches below
113
114 - SAUCE: set correct rates before registering SPDIF codec DAI
115 - SAUCE: adjust sgtl5000 and S/PDIF order
116 - SAUCE: ENGR00139461-2 mxc alsa soc spdif driver
117 - SAUCE: ENGR00139461-1 mxc alsa soc spdif driver
118 - SAUCE: mx53loco: fix audio capture using SSI SYN mode
119 - SAUCE: sgtl5000: fix power on/off of MIC bias
120
Eric Miaob4700ab2011-10-16 16:03:03 +0800121 -- Eric Miao <eric.miao@linaro.org> Sun, 16 Oct 2011 16:02:17 +0800
122
Eric Miao4c814422011-10-10 17:42:19 +0800123linux-linaro-lt-mx5-3.1 (3.1.0-1000.0) oneiric; urgency=low
124
125 * Added Ubuntu packaging from linux-linaro-oneiric for
126 Freescale's LT 3.1 kernel
127
128 -- Eric Miao <eric.miao@linaro.org> Mon, 10 Oct 2011 17:12:31 +0800
129
Eric Miaob6a4a8c2011-10-10 17:04:10 +0800130linux-linaro (3.0.0-1007.11) natty; urgency=low
131
132 [ John Rigby ]
133
134 * SAUCE: ARM: OMAP: Overo: remove duplicate call to overo_ads7846_init()
135 LP: #816004
136 * LINARO: PACKAGING: Never rename dbgsym deb to ddeb
137
138 -- John Rigby <john.rigby@linaro.org> Tue, 27 Sep 2011 13:23:11 -0600
139
140linux-linaro (3.0.0-1007.10) natty; urgency=low
141
142 [ John Rigby ]
143
144 * LINARO: DEBUG: Only rename debug symbol deb for primary archive
145
146 -- John Rigby <john.rigby@linaro.org> Mon, 26 Sep 2011 18:57:19 -0600
147
148linux-linaro (3.0.0-1007.9) oneiric; urgency=low
149
150 [ John Rigby ]
151
152 * Enable crypto modules and remove crypto-modules from
153 exclude-module files
154 LP: #826021
155
156 -- John Rigby <john.rigby@linaro.org> Mon, 26 Sep 2011 10:44:23 -0600
157
158linux-linaro (3.0.0-1006.8) natty; urgency=low
159
160 [ John Rigby ]
161
162 * Bump ABI
163 * Rebase on linux-linaro-3.0-2011.09-0
164 * LINARO: CONFIG: Enable CONFIG_RELAY
165 * LINARO: always build debug packages
166 * LINARO: PACKAGING: add .gnu_debuglink sections to .ko files
167
168 -- John Rigby <john.rigby@linaro.org> Fri, 23 Sep 2011 20:33:58 -0600
169
170linux-linaro (3.0.0-1005.7) natty; urgency=low
171
172 [ John Rigby ]
173
174 * Bump ABI
175 * New upstreams
176 - Ubuntu 3.0.0-11.17 which the final kernel for prior to Ubuntu 11.10
177 rebased on
178 - 12Sep2011 snapshot of linux-linaro-3.0
179 merged with
180 - upstream v3.0.4 (because that is what the Ubuntu release is based on)
181 LP: #709245
182 * Unified configs with wifi configs from Robert Nelson added in
183 * Configs seeds and scripts but the build system does not yet use them
184 * OMAP3 audio fix from Mans Rullgard
185 LP: #760919
186 * Workaround a cross build failure with latest toolchain
187
188 -- John Rigby <john.rigby@linaro.org> Mon, 12 Sep 2011 13:36:56 -0600
189
190linux-linaro (3.0.0-1004.6) natty; urgency=low
191
192 [ John Rigby ]
193
194 * LINARO: CONFIG: Enable CONFIG_LBDAF
195 - LP: #824545
196
197 -- John Rigby <john.rigby@linaro.org> Wed, 24 Aug 2011 09:36:17 -0600
198
199linux-linaro (3.0.0-1004.5) natty; urgency=low
200
201 [ John Rigby ]
202
203 * Rebase on linux-linaro-3.0-2011.08-0
204 * LINARO: CONFIG: Enable SMSC95XX
205 - LP: #830785
206 * LINARO: CONFIG: Fix mx5 MMC_SDHCI config settings
207 * LINARO: fix cross compiling of tools
208 * LINARO: New shared flavour for arch headers and tools
209
210 -- John Rigby <john.rigby@linaro.org> Sun, 21 Aug 2011 22:20:20 -0600
211
212linux-linaro (3.0.0-1003.4) natty; urgency=low
213
214 [ John Rigby ]
215 * LINARO: CONFIG: Enable basic profiling and tracing options
216 - LP: #764796
217 * LINARO: CONFIG: Enable EXT3 and EXT4 for all flavours
218 - LP: #822593
219
220 -- John Rigby <john.rigby@linaro.org> Mon, 08 Aug 2011 12:15:28 -0600
221
222linux-linaro (3.0.0-1002.3) natty; urgency=low
223
224 [ John Rigby ]
225
226 * LINARO: SAUCE: NO-UP: workaround mx51 build error
227 * LINARO: CONFIG: Turn on CONFIG_HIGHMEM
228
229 -- John Rigby <john.rigby@linaro.org> Thu, 28 Jul 2011 17:05:03 -0600
230
231linux-linaro (3.0.0-1002.2) natty; urgency=low
232
233 [ Ricardo Salveti ]
234
235 * LINARO: CONFIG: Enabling tracing and profiling to work with ARM DS-5
236 * LINARO: CONFIG: MMC_SDHCI=y for MX51
237 * LINARO: CONFIG: Enabling WL12XX for Omap
238
239 -- John Rigby <john.rigby@linaro.org> Thu, 28 Jul 2011 10:58:12 -0600
240
241linux-linaro (3.0.0-1001.1) natty; urgency=low
242
243 [ John Rigby ]
244
245 * Rebase to linux-linaro-3.0-2011.07-1
246 * LINARO: CONFIG: Enable CONFIG_OMAP2_DSS_VENC
247
248 [ Ricardo Salveti ]
249
250 * LINARO: CONFIG: Enable CONFIG_USB_NET_SMSC95XX=m for Omap
251 * LINARO: CONFIG: enabling LED support for omap
252
253 -- John Rigby <john.rigby@linaro.org> Mon, 25 Jul 2011 14:58:08 -0600
254
255linux-linaro (3.0.0-1000.0) natty; urgency=low
256
257 [ John Rigby ]
258
259 * New 3.0.0 based release
260 linux-linaro-3.0-2011.07-0
261 Ubuntu-3.0.0-6.7 commits played on top
262 debian.linaro from linux-linaro-2.6.39-1001.2
263 * CONFIG: Enable SCHED_MC and SCHED_SMT
264
265 -- John Rigby <john.rigby@linaro.org> Fri, 22 Jul 2011 00:11:56 -0600
266
267linux-linaro (2.6.39-1001.2) oneiric; urgency=low
268
269 [ John Rigby ]
270
271 * Rebase on linaro-linux-2.6.39-upstream-23Jun2011
272 * Bump ABI
273 * update configs after rebase
274 * CONFIG: Disable OMAP2 to allow THUMB2_KERNEL
275 * CONFIG: Update omap config based on upstream omap4_defconfig
276 * Rebase to linux-linaro-2.6.39-2011.06-0
277
278 -- John Rigby <john.rigby@linaro.org> Sun, 26 Jun 2011 18:47:45 +0100
279
280linux-linaro (2.6.39-1000.1) oneiric; urgency=low
281
282 [ John Rigby ]
283
284 * Reenable building of dtb's
285
286 -- John Rigby <john.rigby@linaro.org> Wed, 22 Jun 2011 07:22:49 -0600
287
288linux-linaro (2.6.39-1000.0) oneiric; urgency=low
289
290 [ John Rigby ]
291
292 * Start Oneiric
293 * First 2.6.39 release based on
294 linaro-linux-2.6.39-upstream-21Jun2011
295 Ubuntu-2.6.39-3.10
296 * Minimal configs based on upstream defconfigs plus
297 additional options to satisfy enforce script
298
299 -- John Rigby <john.rigby@linaro.org> Tue, 21 Jun 2011 13:45:49 -0600
300
301linux-linaro (2.6.38-1003.4) natty; urgency=low
302
303 [ Avik Sil ]
304
305 arm: pmu: support pmu/perf on OMAP4
306 - LP: #702999
307
308 [ Ian Multon ]
309 OMAP: Fix non-combined OMAP3+OMAP4 builds
310
311 [ Ricardo Salveti ]
312
313 OMAP4 DRM support:
314 ARM: OMAP4: Remove extra instance of omap_dss_device
315 OMAP: DSS2: HDMI: Adding get_edid callback support
316 OMAP: DSS2: HDMI: Adding is_detected callback support
317 OMAP: DSS: HDMI: tame hdmi driver
318 DRM: OMAP: Add HDMI support
319 OMAP: DSS2: adding force argument to is_detected()
320 OMAP4: DSS2: HDMI: adding a workaround for LG monitors
321 OMAP: DSS2: Avoid enabling panel if none is around
322 OMAP: I2C: "controller timed out" message should use dev_warn
323 OMAP: devices: register first the drm omap device, and then the SGX one
324 OMAP4: DSS: HDMI: increasing msleep value for the detect workaround
325 OMAP: DRM: Using same numbers of CRTCS and PIPES for OMAP 3 and 4
326 DRM: OMAP: Fixing PVR kernel module name
327 OMAP2: DSS: HDMI: removing error msg from check_timing
328 LINARO: CONFIG: enable CONFIG_PREEMPT for OMAP as needed for SGX
329 LINARO: CONFIG: Enabling WL12XX
330 LINARO: CONFIG: Changing CONFIG_LEDS_TRIGGER_HEARTBEAT from module to built-in
331 DRM: OMAP: replace request_module with request_module_nowait
332
333 [ John Rigby ]
334
335 * Rebase to new upstreams:
336 Linux v2.6.38.3
337 linaro-linux-2.6.38-upstream-20Apr2011
338 Ubuntu-2.6.38-8.42
339 And temporarily:
340 testbranch from linaro-linux-2.6.38 until it is merge upstream
341 and enable CONFIG_DRM for omap
342 - LP: #725252
343 Enable profiling related CONFIG options:
344 CONFIG_PROFILING=y
345 CONFIG_PERF_EVENTS=y
346 CONFIG_HW_PERF_EVENTS=y
347 CONFIG_FTRACE=y
348 CONFIG_ENABLE_DEFAULT_TRACERS=y
349 CONFIG_HIGH_RES_TIMERS=y
350 * Rebase to linaro-linux-2.6.38-upstream-26Apr2011
351 * Rebase to linaro-linux-2.6.38 as of 3May2011
352 master and testing merged.
353 * Enable MUSB related CONFIG options for OMAP:
354 CONFIG_USB_MUSB_HDRC=y
355 CONFIG_USB_MUSB_OMAP2PLUS=y
356 CONFIG_USB_MUSB_OTG=y
357 CONFIG_USB_GADGET_MUSB_HDRC=y
358 CONFIG_USB_MUSB_HDRC_HCD=y
359 CONFIG_USB_INVENTRA_DMA=y
360 CONFIG_USB_MUSB_DEBUG=y
361 - LP: #730698
362 * Disable CPU_FREQ for omap because of stability issues
363 * Rebase to linaro-linux-2.6.38-upstream-17May2011
364 Has all the OMAP4 display fixes from rsalveti so those
365 have been removed from Linaro patch series.
366 * Rebase to linux-linux-2.6.38-upstream-23May2011
367 Which is includes upstream stable release v2.6.38.7
368 * Enable HIGHMEM for OMAP
369 * Disable WL12XX
370 Breaks all networking in current state
371 * Rebase on final linux-linux-2.6.38 linaro-11.05-2.6.38
372 * Fix provides to provide linux-image, linux-headers etc.
373 - LP: #786829
374
375 [ Upstream Fixes ]
376
377 * WARN_ON_SMP(): Allow use in if() statements on UP
378 * futex: Fix WARN_ON() test for UP
379
380 -- John Rigby <john.rigby@linaro.org> Fri, 27 May 2011 18:53:05 -0600
381
382linux-linaro (2.6.38-1002.3) natty; urgency=low
383
384 [ Upstream Fixes ]
385
386 * MUSB: shutdown: Make sure block is awake before doing shutdown
387 - LP: #745737
388 * Fixed gpio polarity of gpio USB-phy reset.
389 - LP: #747639
390
391 [ Andy Green ]
392
393 * LINARO: SAUCE: disable CONFIG_OMAP_RESET_CLOCKS
394 - LP: #752900
395
396 [ John Rigby ]
397
398 * Rebase to new upstreams:
399 Linux v2.6.38.1
400 linaro-linux-2.6.38-upstream-29Mar2011
401 Ubuntu-2.6.38-7.35
402 * SAUCE: OMAP4: clock: wait for module to become accessible on
403 a clk enable
404 - LP: #745737
405 * Rebase to new upstreams:
406 Linux v2.6.38.2
407 linaro-linux-2.6.38-upstream-5Apr2011
408 Ubuntu-2.6.38-8.41
409 - LP: #732842
410 * Update configs for device tree, dvfs and lttng
411 * LINARO: add building of dtb's
412 * LINARO: SAUCE: Disable lowest operating freqs on omap34xx
413 - LP: #732912
414
415 -- John Rigby <john.rigby@linaro.org> Thu, 14 Apr 2011 12:16:06 -0600
416
417linux-linaro (2.6.38-1001.2) natty; urgency=low
418
419 [ John Rigby ]
420
421 * Rebase to new upstreams:
422 Linux v2.6.38-rc6 -- same
423 linaro-linux-2.6.38-upstream-1Mar2011 -- new
424 Ubuntu-2.6.38-5.32 -- same
425 - LP: #724377
426 * Enable CONFIG_THUMB2_KERNEL for OMAP[34]
427 * Bump ABI
428 * Rebase to new upstreams:
429 Linux v2.6.38-rc7
430 linaro-linux-2.6.38-upstream-4Mar2011
431 ubuntu-natty master-next as of 4Mar2011
432 * Re-enable display on OMAP4
433 * Disable CONFIG_OMAP2_DSS_SDI
434 - LP: #728603
435 - LP: #720055
436 * Rebase to new upstreams:
437 Linux v2.6.38-rc8
438 linaro-linux-2.6.38-upstream-9Mar2011
439 rebased to 2.6.38-rc8
440 * Remove generated file kernel-versions and sort kernel-versions.in
441 * Enable CONFIG_TIMER_STATS
442 - LP: #718677
443 * Rebase to new upstreams:
444 Linux v2.6.38 final
445 linaro-linux-2.6.38-upstream-16Mar2011
446 - LP: #708883
447 - LP: #723159
448 ubuntu-natty Ubuntu-2.6.38-7.35
449 * Enable CONFIG_IP_PNP and CONFIG_ROOT_NFS for all flavours
450 - LP: #736429
451 * mach-ux500: fix build error
452 workaround a problem in linux-linaro-2.6.38
453 * OMAP4:Fix -EINVAL for vana, vcxio, vdac
454 from omap-linux mailing list pending ack
455 * turn off ROOT_NFS for mx51
456 it makes the kernel too large to boot with current hwpack settings
457
458 -- John Rigby <john.rigby@linaro.org> Fri, 18 Mar 2011 07:36:33 -0600
459
460linux-linaro (2.6.38-1000.1) natty; urgency=low
461
462 * Rebase to new upstreams:
463 Linux v2.6.38-rc5
464 linaro-linux-2.6.38-upstream-22Feb2011
465 Ubuntu-2.6.38-4.31
466 * Enforce CONFIG_PM_ADVANCED_DEBUG for all flavours
467 - LP: #713075
468 * Temporarily disable display on OMAP4
469 * Rebase to new upstreams:
470 Linux v2.6.38-rc6
471 linaro-linux-2.6.38-upstream-23Feb2011
472 Ubuntu-2.6.38-5.32
473 * OMAP4: enable smc instructions in arch/arm/mach-omap2/sleep34xx.S
474 * Disable CONFIG_BINFMT_AOUT for OMAP
475 Now consistent with other platforms
476
477 -- John Rigby <john.rigby@linaro.org> Wed, 23 Feb 2011 16:57:41 -0700
478
479linux-linaro (2.6.37-1003.6) natty; urgency=low
480
481 [ John Rigby ]
482
483 * Rebase to new upstreams:
484 linaro-linux-2.6.37-upstream-24Jan2011
485 Ubuntu-2.6.37-12.26
486 Skipping because of conflicting upstream patches:
487 ARM: stack protector: change the canary value per task
488 Revert "ARM: stack protector: change the canary value per task"
489 UBUNTU: SAUCE: ARM: OMAP: Beagle: support twl gpio differences on xM
490 * Add U8500 flavour
491 * Rebase to linaro-linux-2.6.37-upstream-27Jan2011
492 * Fix Ubuntu upstream version number typo
493 * Rebase to linaro-linux-2.6.37-upstream-31Jan2011
494 * Rebase to linaro-linux-2.6.37-upstream-08Feb2011
495 * Enforce CONFIG_PRINTK_TIME for all flavours
496 - LP: #715576
497 * Fix package control file to indicate that OMAP4 is supported
498 - LP: #714590
499 * Enforce CONFIG_PM_DEBUG for all flavours
500 - LP: #713075
501 * Add s5pv310 flavour
502 * enable and enforce CONFIG_BTRFS_FS for all flavours
503 - LP: #715835
504 * Rebase to linaro-linux-2.6.37-upstream-10Feb2011
505 - LP: #707038
506 * Add config cleanup and automatic tmp branch creation to mkflavourbranches
507
508 -- John Rigby <john.rigby@linaro.org> Tue, 08 Feb 2011 19:56:22 -0700
509
510linux-linaro (2.6.37-1002.5) natty; urgency=low
511
512 [ John Rigby ]
513
514 * rebase to new upstreams:
515 v2.6.37 final
516 Ubuntu-2.6.37-12.26
517 * Clean up lintian errors and warnings
518 - LP: #697317
519
520 -- John Rigby <john.rigby@linaro.org> Sat, 08 Jan 2011 18:34:41 -0700
521
522linux-linaro (2.6.37-1001.4) natty; urgency=low
523
524 [ John Rigby ]
525
526 * rebase to new upstreams:
527 snapshot of linux-linaro-2.6.36 13Dec2010
528 revert 2.6.36.1
529 merge v2.6.37-rc4
530 rebase Ubuntu-2.6.37-8.21 onto the result
531 * LINARO: update configs
532 enable CONFIG_SWAP, CONFIG_POSIX_MQUEUES, CONFIG_PERF_EVENTS
533
534 -- John Rigby <john.rigby@linaro.org> Mon, 13 Dec 2010 16:51:19 -0700
535
536linux-linaro (2.6.37-1000.3) natty; urgency=low
537
538 [ John Rigby ]
539
540 * LINARO: no build-depends-indep for now
541 * LINARO: Fix problems with naming of flavour independent debs
542 * OMAP4: enable smc instruction in new assembler versions
543
544 -- John Rigby <john.rigby@linaro.org> Wed, 01 Dec 2010 01:07:18 -0700
545
546linux-linaro (2.6.37-1000.2) natty; urgency=low
547
548 [ John Rigby ]
549
550 * fix problems with source package per flavour building
551
552 -- John Rigby <john.rigby@linaro.org> Tue, 30 Nov 2010 01:00:49 -0700
553
554linux-linaro (2.6.37-1000.1) natty; urgency=low
555
556 [ John Rigby ]
557
558 * rebase to new upstreams:
559 snapshot of linux-linaro-2.6.36 24Nov2010
560 minus commits from 2.6.36.1 merge
561 merged with upstream v2.6.37-rc3
562 plus sauce and packaging from Ubuntu-2.6.37-7.18
563 all but three commits applied cleanly
564 Fixed:
565 UBUNTU: SAUCE: omap: remove calls to usb_nop_xceiv_register from board files
566 Dropped:
567 ARM: stack protector: change the canary value per task
568 Revert "ARM: stack protector: change the canary value per task"
569 after merge conflict was resolved the commit ended up being no change
570 so the effect was to drop these
571
572 -- John Rigby <john.rigby@linaro.org> Fri, 26 Nov 2010 14:20:09 -0700
573
574linux-linaro (2.6.36-1000.1) natty; urgency=low
575
576 [ John Rigby ]
577
578 * First 2.6.36 release based on:
579 linux-linaro-2.6.36 snapshot of 16Nov2010
580 Note: this is core 2.6.36 plus ARM related from 2.6.37
581
582 Ubuntu 2.6.37-5.13 packaging and sauce
583 All Ubuntu patches applied cleanly or cleanly after fixes
584 with the following exceptions. See linaro-dropped.txt for details:
585
586 These are not needed because these already are in linux-linaro-2.6.36:
587 ARM: stack protector: change the canary value per task
588 Revert "ARM: stack protector: change the canary value per task"
589
590 These were not applied because ...:
591 UBUNTU: SAUCE: fix documentation strings for struct input_keymap_entry
592 This patch does not seem to patch any code that exists in linux-linaro-2.6.36
593 For that matter it doesn't do what the description says even in Ubuntu
594 mmap randomization for executable mappings on 32-bit
595 Not a trivial merge failure, wait for linux-linaro-2.6.37 for this
596 Fix userspace build of linux/fs.h
597 patches a section of file that does not exist in 2.6.36
598 UBUNTU: ubuntu: AUFS -- track changes to work queue initialisation
599 change that makes this patch necessary is not in 2.6.36
600
601 Linaro packaging
602
603 -- John Rigby <john.rigby@linaro.org> Thu, 18 Nov 2010 15:23:03 -0700
604
605linux-linaro (2.6.35-1008.15) maverick-proposed; urgency=low
606
607 [ Robert Nelson ]
608
609 * SRU: Fix DVI for Beagle xM rev A3
610 - LP: #663642
611
612 -- John Rigby <john.rigby@linaro.org> Thu, 21 Oct 2010 11:01:14 -0600
613
614linux-linaro (2.6.35-1008.14) maverick-proposed; urgency=low
615
616 [ Andy Whitcroft ]
617
618 * reduce disk usage during buildd builds
619 - LP: #645653
620
621 [ Enric Balletbo i Serra ]
622
623 * ARM: igepv2: Adding support for VBUS and overcurrent
624 - LP: #651589
625 * ARM: igepv2: Fix and improve LED handling
626 - LP: #654582
627 * ARM: igepv2: Introduce function to dectect HW version
628 - LP: #654586
629 * ARM: igepv2: Fix handling of GPIOs for WLAN-BT combo
630 - LP: #654590
631 * ARM: igepv2: Add i2c eeprom driver to read EDID
632 - LP: #654594
633 * ARM: igepv2: Remove VMMC2 regulator
634 - LP: #654595
635
636 [ Maurus Cuelenaere ]
637
638 * SAUCE: ARM: OMAP3: Add S-Video output to IGEPv2 board
639 - LP: #607250
640
641 [ Upstream Stable ]
642 * Linux 2.6.35.7
643
644 [ Upstream MMC updates ]
645
646 * mmc: recognize CSD structure
647 * mmc: split mmc_sd_init_card()
648 * mmc: implement SD-combo (IO+mem) support
649 * sdhci: remove useless set_clock() check
650 * sdhci: 8-bit data transfer width support
651 * sdhci: don't assign mmc->caps at SDHCI directly
652 * mmc: only set blockaddressed for > 2GiB cards
653 * mmc: omap: fix for bus width which improves SD card's peformance.
654 * sdhci-pltfm: switch to module device table matching
655 * sdhci-pltfm: reorganize Makefile entries to support SoC devices
656 * sdhci-pltfm: add support for CNS3xxx SoC devices
657 * omap hsmmc: fix processing of all dma interrupts as block completion
658 * sdhci: add regulator support
659 * sdhci: add no hi-speed bit quirk support
660 * mmc: avoid getting CID on SDIO-only cards
661 * omap_hsmmc: remove unused local `state'
662 * omap hsmmc: fix a racing case between kmmcd and omap_hsmmc_suspend
663 * drivers/mmc/host/imxmmc.c: adjust confusing if indentation
664 * mmc: sdhci-pltfm: Add structure for host-specific data
665 * mmc: sdhci-pltfm: move .h file into appropriate subdir
666 * mmc: sdhci: introduce get_ro private write-protect hook
667 * mmc: sdhci_pltfm: pass more data on custom init call
668 * mmc: sdhci-of-esdhc: factor out common stuff
669 * mmc: sdhci-pltfm: add -pltfm driver for imx35/51
670 * mmc: quirk fix for timeout problem
671 * babbage: esdhc device registration
672 * babbage: update mx51_defconfig
673 - LP: #656966
674
675
676 [ Upstream ARM fixes ]
677
678 * Make PTRACE_SINGLESTEP work with user helpers
679 * ARM: fix section mismatch warnings in Versatile Express
680 * ARM: use memblock to remove memory from available memory
681 * video: omap: vram: remove from normal memory
682 - LP: #627779
683
684 [ John Rigby ]
685 * LINARO: update configs
686 - LP: #659799
687
688 -- John Rigby <john.rigby@linaro.org> Tue, 19 Oct 2010 16:09:52 -0600
689
690linux-linaro (2.6.35-1007.13) maverick; urgency=low
691
692 [ Upstream Ubuntu ]
693
694 * Ubuntu-2.6.35-22.33
695 * Ubuntu-2.6.35-22.34
696
697 [ Upstream ARM Fixes ]
698
699 * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
700 * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
701 * ARM: add a vma entry for the user accessible vector page
702 * ARM: plug a race with the alignment trap handler
703 * arm: fix really nasty sigreturn bug
704 * ARM: prevent multiple syscall restarts
705 * ARM: 6387/1: errata: check primary part ID in proc-v7.S
706 * ARM: 6388/1: errata: DMB operation may be faulty
707 * ARM: 6389/1: errata: incorrect hazard handling in the SCU may lead to
708 data corruption
709 * ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
710 * kconfig: delay symbol direct dependency initialization
711 * ARM: kprobes-decode: add support for MOVW instruction
712 * ARM: errata: check primary part ID in proc-v7.S
713 * ARM: errata: DMB operation may be faulty
714 * ARM: errata: incorrect hazard handling in the SCU may lead to data
715 corruption
716 * ARM: errata: faulty hazard checking in the Store Buffer may lead to
717 data corruption
718 * ARM: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9
719
720 [ Ricardo Salveti ]
721 * ARM: OMAP3: Add S-Video output to IGEPv2 board
722 - LP: #607250
723 * ARM: OMAP3: Adding vdd_sdi regulator supply to IGEPv2 board
724 - LP: #607250
725
726 [ Upstream Stable Releases ]
727 * 2.6.35.5
728 * 2.6.35.6
729
730 [ Upstream ftrace support ]
731
732 * ARM: 6312/1: ftrace: allow building without frame pointers
733 * ARM: 6314/1: ftrace: allow build without frame pointers on ARM
734 * ARM: 6315/1: ftrace: add ENDPROC annotations
735 * ARM: 6316/1: ftrace: add Thumb-2 support
736 * ARM: 6317/1: ftrace: pass KBUILD_CFLAGS to record_mcount.pl
737 * ARM: 6318/1: ftrace: fix and update dynamic ftrace
738 * ARM: 6319/1: ftrace: add Thumb-2 support to dynamic ftrace
739 * ARM: 6320/1: ftrace: enable dynamic ftrace
740
741 [ Nicolas Pitre ]
742
743 * ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via
744 /dev/mem
745 * ARM: bring SECCOMP behavior in sync with the version in mainline
746 * ARM: do not define VMALLOC_END relative to PAGE_OFFSET
747
748 [ John Rigby ]
749
750 * LINARO: Start new release
751 * LINARO: Bump ABI
752 * LINARO: update configs
753
754 -- John Rigby <john.rigby@linaro.org> Thu, 07 Oct 2010 17:58:05 -0600
755
756linux-linaro (2.6.35-1006.12) maverick; urgency=low
757
758 [ John Rigby ]
759
760 * Revert "LINARO: [Config] workaround for kernel-wedge error on empty
761 udebs"
762 * LINARO: Start new release
763 * LINARO: no mouse-modules for linaro-vexpress
764 * LINARO: Add tools section to debian.linaro/control.stub.in
765 - LP: #643462
766
767 -- John Rigby <john.rigby@linaro.org> Mon, 20 Sep 2010 10:20:21 -0600
768
769linux-linaro (2.6.35-1006.11) maverick; urgency=low
770
771 [ Upstream Kernel Changes ]
772
773 * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
774 - LP: #633417
775 * ARM: add a vma entry for the user accessible vector page
776 * ARM: plug a race with the alignment trap handler
777 * ARM: SECCOMP support
778
779 [ John Rigby ]
780
781 * LINARO: rebase on linux-linaro-2.6.35-16Sep2010 and Ubuntu-2.6.35-22.32 merge
782 * LINARO: [CONFIG] igep ethernet fix
783 * LINARO: [CONFIG] turn do_tools on
784 - LP: #618734
785
786 -- John Rigby <john.rigby@linaro.org> Thu, 16 Sep 2010 18:03:14 -0600
787
788linux-linaro (2.6.35-1005.10) maverick; urgency=low
789
790 [ Upstream Kernel Changes ]
791
792 * mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=y
793
794 [ John Rigby ]
795
796 * LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-20.29 merge
797 * LINARO: [Config] Turn on CONFIG_HIGHMEM for vexpress
798 * LINARO: Update Vcs-Git
799 * LINARO: add Recommends uboot-mkimage
800 - LP: #628848
801
802 -- John Rigby <john.rigby@linaro.org> Wed, 08 Sep 2010 10:03:22 -0600
803
804linux-linaro (2.6.35-1004.9) maverick; urgency=low
805
806 [ Upstream Kernel Changes ]
807
808 * ARM: OMAP: Beagle: revision detection
809 - LP: #613855
810 * ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect
811 - LP: #613855
812 * ARM: OMAP: Beagle: no gpio_wp pin connection on xM
813 - LP: #613855
814 * OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings
815 - LP: #624115
816
817 -- John Rigby <john.rigby@linaro.org> Fri, 27 Aug 2010 20:27:29 -0600
818
819linux-linaro (2.6.35-1004.8) maverick; urgency=low
820
821 [ John Rigby ]
822
823 * LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-19.25 merge
824
825 -- John Rigby <john.rigby@linaro.org> Wed, 25 Aug 2010 19:46:17 -0600
826
827linux-linaro (2.6.35-1003.7) maverick; urgency=low
828
829 [ John Rigby ]
830
831 * LINARO: [Config] Fix vexpress config
832 * LINARO: [Config] Add mx51 flavour
833 * LINARO: [config] Update vexpress config
834 Enable USB mass storage as a module
835 Enable SCSI disk support
836
837 -- John Rigby <john.rigby@linaro.org> Sun, 22 Aug 2010 21:29:44 -0600
838
839linux-linaro (2.6.35-1002.6) maverick; urgency=low
840
841 [ Tim Gardner ]
842
843 * [Config] Find ABI files according to their source package name
844 * [Config] getabi: Only get armel omap and vexpress
845
846 [ John Rigby ]
847
848 * [Config] Changed flavour names from {omap,vexpress} to
849 linaro-{omap,vexpress}
850
851 -- Tim Gardner <tim.gardner@canonical.com> Tue, 17 Aug 2010 15:57:51 +0100
852
853linux-linaro (2.6.35-1001.5) maverick; urgency=low
854
855 * New upstream trees
856
857 Merge of linaro_merge_100811 and Ubuntu-2.6.35-15.21
858
859 Conflicts:
860 arch/arm/mach-omap2/board-4430sdp.c
861
862 linaro_merge_100811 added sdp4430_leds_gpio to sdp4030_devices
863 Ubuntu 2.6.35-15.21 added sdp4430_nop_usb_device to sdp4030_devices
864
865 resolution was to just add both
866
867 * Fold in packaging from 2.6.35-1000.4
868 * [Config] Update configs for new upstream
869 * omap3 nand: fix missing parameter to gpmc_prefetch_reset
870
871 -- John Rigby <john.rigby@linaro.org> Wed, 11 Aug 2010 14:20:28 -0600
872
873linux-linaro (2.6.35-1000.4) maverick; urgency=low
874
875 [ John Rigby ]
876
877 * LINARO: replace debian.master with debian.linaro
878 * LINARO: Add vexpress flavour
879
880 -- John Rigby <john.rigby@linaro.org> Tue, 10 Aug 2010 10:23:30 -0600
881
882linux-linaro (2.6.35-1000.3) maverick; urgency=low
883
884 [ John Rigby ]
885
886 * LINARO: cleanup debian.linaro control file
887
888 -- John Rigby <john.rigby@linaro.org> Tue, 03 Aug 2010 10:16:29 -0600
889
890linux-linaro (2.6.35-1000.2) maverick; urgency=low
891
892 [ John Rigby ]
893
894 * Bump upload number to workaround launchpad upload rejection
895
896 -- John Rigby <john.rigby@linaro.org> Wed, 28 Jul 2010 11:20:13 -0600
897
898linux-linaro (2.6.35-1000.1) maverick; urgency=low
899
900 [ Linaro Kernel Changes ]
901
902 * Turn off CONFIG_SPARSE_IRQ
903
904 -- John Rigby <john.rigby@linaro.org> Tue, 27 Jul 2010 17:17:39 -0600
905
906linux-linaro (2.6.35-1000.0) maverick; urgency=low
907
908 [ John Rigby ]
909
910 * Initial Linaro linux tree
911
912 -- John Rigby <john.rigby@linaro.org> Tue, 27 Jul 2010 11:34:30 -0600