aboutsummaryrefslogtreecommitdiff
path: root/target-sh4
AgeCommit message (Collapse)Author
2014-03-13cpu-exec: Change cpu_loop_exit() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13exec: Change tlb_fill() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move breakpoints field from CPU_COMMON to CPUStateAndreas Färber
Most targets were using offsetof(CPUFooState, breakpoints) to determine how much of CPUFooState to clear on reset. Use the next field after CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move exception_index field from CPU_COMMON to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Turn cpu_handle_mmu_fault() into a CPUClass hookAndreas Färber
Note that while such functions may exist both for *-user and softmmu, only *-user uses the CPUState hook, while softmmu reuses the prototype for calling it directly. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Factor out cpu_generic_init()Andreas Färber
All targets using it gain the ability to set -cpu name,key=value,... options via the default TYPE_CPU CPUClass::parse_features() implementation. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Turn cpu_has_work() into a CPUClass hookAndreas Färber
Default to false. Tidy variable naming and inline cast uses while at it. Tested-by: Jia Liu <proljc@gmail.com> (or32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-21target-sh4: Use new qemu_ld/st opcodesAurelien Jarno
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-12-09target-sh4: move features flag after CPU_COMMONBobby Bingham
Everything before CPU_COMMON in the structure is cleared as part of a CPU reset. This included the features flag, which indicates whether SH4A instructions are supported or not. As a result, a CPU reset downgraded the CPU from an SH4A to an SH4. Signed-off-by: Bobby Bingham <koorogi@koorogi.info> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-10-11Merge remote-tracking branch 'rth/tcg-pull' into stagingAnthony Liguori
# By Richard Henderson # Via Richard Henderson * rth/tcg-pull: exec: Add both big- and little-endian memory helpers tcg: Add qemu_ld_st_i32/64 tcg: Add TCGMemOp configure: Remove CONFIG_QEMU_LDST_OPTIMIZATION tcg: Add tcg-be-ldst.h tcg: Add tcg-be-null.h exec: Delete is_tcg_gen_code and GETRA_EXT tcg-aarch64: Update to helper_ret_*_mmu routines tcg: Merge tcg_register_helper into tcg_context_init tcg: Add tcg-runtime.c helpers to all_helpers tcg: Put target helper data into an array. tcg: Remove stray semi-colons from target-*/helper.h tcg: Move helper registration into tcg_context_init target-m68k: Rename helpers.h to helper.h tcg: Use a GHashTable for tcg_find_helper tcg: Delete tcg_helper_get_name declaration tcg-hppa: Remove tcg backend Message-id: 1381440525-6666-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-10tcg: Move helper registration into tcg_context_initRichard Henderson
No longer needs to be done on a per-target basis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-07cpu: Drop cpu_model_str from CPU_COMMONAndreas Färber
Since this is only read in cpu_copy() and linux-user has a global cpu_model, drop the field from generic code. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-02tcg: Change tcg_gen_exit_tb argument to uintptr_tRichard Henderson
And update all users. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-29cpu: Partially revert "cpu: Change qemu_init_vcpu() argument to CPUState"Andreas Färber
Commit c643bed99 moved qemu_init_vcpu() calls to common CPUState code. This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed". The reason for the failure is that CPUClass::kvm_fd is not yet initialized in the following call graph: ->x86_cpu_realizefn ->x86_cpu_apic_realize ->qdev_init ->device_set_realized ->device_reset (hotplugged == 1) ->apic_reset_common ->vapic_base_update ->kvm_apic_vapic_base_update This causes attempted KVM vCPU ioctls to fail. By contrast, in the non-hotplug case the APIC is reset much later, when the vCPU is already initialized. As a quick and safe solution, move the qemu_init_vcpu() call back into the targets' realize functions. Reported-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386) Tested-by: Jia Liu <proljc@gmail.com> (for openrisc) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27cpu: Introduce CPUClass::gdb_{read,write}_register()Andreas Färber
Completes migration of target-specific code to new target-*/gdbstub.c. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27gdbstub: Replace GET_REG*() macros with gdb_get_reg*() functionsAndreas Färber
This avoids polluting the global namespace with a non-prefixed macro and makes it obvious in the call sites that we return. Semi-automatic conversion using, e.g., sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c followed by manual tweaking for sparc's GET_REGA() and Coding Style. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27target-sh4: Move cpu_gdb_{read,write}_register()Andreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-26cpu: Introduce CPUState::gdb_num_regs and CPUClass::gdb_num_core_regsAndreas Färber
CPUState::gdb_num_regs replaces num_g_regs. CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS. Allows building gdb_register_coprocessor() for xtensa, too. As a side effect this should fix coprocessor register numbering for SMP. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Turn cpu_get_phys_page_debug() into a CPUClass hookAndreas Färber
Change breakpoint_invalidate() argument to CPUState alongside. Since all targets now assign a softmmu-only field, we can drop helpers cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd(). Prepares for changing cpu_memory_rw_debug() argument to CPUState. Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Move singlestep_enabled field from CPU_COMMON to CPUStateAndreas Färber
Prepares for changing cpu_single_step() argument to CPUState. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Introduce CPUClass::synchronize_from_tb() for cpu_pc_from_tb()Andreas Färber
Where no extra implementation is needed, fall back to CPUClass::set_pc(). Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Introduce CPUClass::set_pc() for gdb_set_cpu_pc()Andreas Färber
This moves setting the Program Counter from gdbstub into target code. Use vaddr type as upper-bound replacement for target_ulong. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Move reset logging to CPUStateAndreas Färber
x86 was using additional CPU_DUMP_* flags, so make that configurable in CPUClass::reset_dump_flags. This adds reset logging for alpha, unicore32 and xtensa. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber
Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09target-sh4: Change gen_intermediate_code_internal() argument to SuperHCPUAndreas Färber
Also use bool type while at it. Prepares for moving singlestep_enabled field to CPUState. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Drop unnecessary dynamic casts in *_env_get_cpu()Andreas Färber
A transition from CPUFooState to FooCPU can be considered safe, just like FooCPU::env access in the opposite direction. The only benefit of the FOO_CPU() casts would be protection against bogus CPUFooState pointers, but then surrounding code would likely break, too. This should slightly improve interrupt etc. performance when going from CPUFooState to FooCPU. For any additional CPU() casts see 3556c233d931ad5ffa46a35cb25cfc057732ebb8 (qom: allow turning cast debugging off). Reported-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Change qemu_init_vcpu() argument to CPUStateAndreas Färber
This allows to move the call into CPUState's realizefn. Therefore move the stub into libqemustub.a. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber
Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12target-sh4: Move PVR/PRR/CVR into SuperHCPUClassAndreas Färber
They are never changed once initialized, and moving them to the class will allow to inspect them before instantiating. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12target-sh4: Introduce SuperHCPU subclassesAndreas Färber
Store legacy name in SuperHCPUClass for -cpu ? and for case-insensitive class lookup. List CPUs by iterating over TYPE_SUPERH_CPU subclasses. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-03gen-icount.h: Rename gen_icount_start/end to gen_tb_start/endPeter Maydell
The gen_icount_start/end functions are now somewhat misnamed since they are useful for generic "start/end of TB" code, used for more than just icount. Rename them to gen_tb_start/end. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-03cpu: Introduce ENV_OFFSET macrosAndreas Färber
Introduce ENV_OFFSET macros which can be used in non-target-specific code that needs to generate TCG instructions which reference CPUState fields given the cpu_env register that TCG targets set up with a pointer to the CPUArchState struct. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-sh4: Use mul*2 for dmul*Richard Henderson
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16cpu: Add CPUArchState pointer to CPUStateAndreas Färber
The target-specific ENV_GET_CPU() macros have allowed us to navigate from CPUArchState to CPUState. The reverse direction was not supported. Avoid introducing CPU_GET_ENV() macros by initializing an untyped pointer that is initialized in derived instance_init functions. The field may not be called "env" due to it being poisoned. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-sh4: Move TCG initialization to SuperHCPU initfnAndreas Färber
Add a tcg_enabled() check to suppress it for qtest. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-sh4: Introduce QOM realizefn for SuperHCPUAndreas Färber
Introduce a realizefn and set realized = true in cpu_sh4_init(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-01target-sh4: Mark as unmigratableAndreas Färber
It neither defined CPU_SAVE_VERSION nor implemented cpu{save,load}(). Mark it as unmigratable at device level. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com>
2013-01-15cpu: Move cpu_index field to CPUStateAndreas Färber
Note that target-alpha accesses this field from TCG, now using a negative offset. Therefore the field is placed last in CPUState. Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change. Move common parts of mips cpu_state_reset() to mips_cpu_reset(). Acked-by: Richard Henderson <rth@twiddle.net> (for alpha) [AF: Rebased onto ppc CPU subclasses and openpic changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19fpu: move public header file to include/fpuPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qom: move include files to include/qom/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-16exec: refactor cpu_restore_stateBlue Swirl
Refactor common code around calls to cpu_restore_state(). tb_find_pc() has now no external users, make it static. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_instr_start from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_icount from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_pc from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>