aboutsummaryrefslogtreecommitdiff
path: root/target-sh4
AgeCommit message (Collapse)Author
2013-03-03gen-icount.h: Rename gen_icount_start/end to gen_tb_start/endPeter Maydell
The gen_icount_start/end functions are now somewhat misnamed since they are useful for generic "start/end of TB" code, used for more than just icount. Rename them to gen_tb_start/end. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-03cpu: Introduce ENV_OFFSET macrosAndreas Färber
Introduce ENV_OFFSET macros which can be used in non-target-specific code that needs to generate TCG instructions which reference CPUState fields given the cpu_env register that TCG targets set up with a pointer to the CPUArchState struct. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-sh4: Use mul*2 for dmul*Richard Henderson
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16cpu: Add CPUArchState pointer to CPUStateAndreas Färber
The target-specific ENV_GET_CPU() macros have allowed us to navigate from CPUArchState to CPUState. The reverse direction was not supported. Avoid introducing CPU_GET_ENV() macros by initializing an untyped pointer that is initialized in derived instance_init functions. The field may not be called "env" due to it being poisoned. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-sh4: Move TCG initialization to SuperHCPU initfnAndreas Färber
Add a tcg_enabled() check to suppress it for qtest. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-sh4: Introduce QOM realizefn for SuperHCPUAndreas Färber
Introduce a realizefn and set realized = true in cpu_sh4_init(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-01target-sh4: Mark as unmigratableAndreas Färber
It neither defined CPU_SAVE_VERSION nor implemented cpu{save,load}(). Mark it as unmigratable at device level. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com>
2013-01-15cpu: Move cpu_index field to CPUStateAndreas Färber
Note that target-alpha accesses this field from TCG, now using a negative offset. Therefore the field is placed last in CPUState. Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change. Move common parts of mips cpu_state_reset() to mips_cpu_reset(). Acked-by: Richard Henderson <rth@twiddle.net> (for alpha) [AF: Rebased onto ppc CPU subclasses and openpic changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19fpu: move public header file to include/fpuPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qom: move include files to include/qom/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-16exec: refactor cpu_restore_stateBlue Swirl
Refactor common code around calls to cpu_restore_state(). tb_find_pc() has now no external users, make it static. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_instr_start from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_icount from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_pc from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_buf from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_ptr from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10disas: avoid using cpu_single_envBlue Swirl
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Richard Henderson <rth@twiddle.net> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-10-31cpus: Pass CPUState to [qemu_]cpu_has_work()Andreas Färber
For target-mips also change the return type to bool. Make include paths for cpu-qom.h consistent for alpha and unicore32. Signed-off-by: Andreas Färber <afaerber@suse.de> [AF: Updated new target-openrisc function accordingly] Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
2012-10-28target-sh4: rename helper flagsAurelien Jarno
Rename helper flags to the new ones. This is purely a mechanical change, it's possible to use better flags by looking at the helpers. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-27Emit debug_insn for CPU_LOG_TB_OP_OPT as well.Richard Henderson
For all targets that currently call tcg_gen_debug_insn_start, add CPU_LOG_TB_OP_OPT to the condition that gates it. This is useful for comparing optimization dumps, when the pre-optimization dump is merely noise. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: remove useless codeAurelien Jarno
Almost dead code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: cleanup DisasContextAurelien Jarno
We should avoid accessing env at translation stage, except of course for static values like the supported features. Remove variables copied from env in DisasContext and use the TB flags instead. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: rework exceptions handlingAurelien Jarno
Since commit fd4bab102 PC is restored in case of exception through code retranslation. While it is clearly the thing to do in case it is not not known if an helper is going to trigger an exception or not (e.g. for load/store, FPU, etc.), it just make things slower when the exception is already known at translation time. Partially revert this commit and save PC in the TCG code. Set bstate to BS_BRANCH to not generate TCG exit code. Micro-optimize the sleep helper. Make all the exception helpers to call raise_exception and mark it as noreturn. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: remove gen_clr_t() and gen_set_t()Aurelien Jarno
gen_clr_t() and gen_set_t() have very few callers and can be remplaced by a single line. Remove them. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: optimize swap.wAurelien Jarno
It's possible swap the two 16-bit words of a 32-bit register using a rotation. If the TCG target doesn't implement rotation, the replacement code is similar to the previously implemented code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: optimize xtrctAurelien Jarno
The register being 32 bit long, after a shift to the right by 16 bits, the upper 16 bit are already cleared. There is no need to call ext16u to clear them. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: implement addv and subv using TCGAurelien Jarno
addv and subv helpers implementation is directly copied from the SH4 manual and looks quite complex. It is however possible to explain it without branches, and is therefore possible to implement it with TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: implement addc and subc using TCGAurelien Jarno
Now that setcond is available, the addc and subc can easily be implemented using TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: use float32_muladd() to implement fmacAurelien Jarno
There is no need to add a SH4 specific pickNaNMulAdd() to softfloat as SH4 is always returning a default NaN. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: mark a few helpers const and pureAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15target-sh4: switch to AREG0 free modeBlue Swirl
Add an explicit CPUState parameter instead of relying on AREG0 and switch to AREG0 free mode. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-07build: move other target-*/ objects to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move libobj-y variable to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move obj-TARGET-y variables to nested Makefile.objsPaolo Bonzini
Also drop duplicate occurrence of device-hotplug.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-04Kill off cpu_state_reset()Andreas Färber
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset() was renamed to cpu_state_reset(), to allow introducing a new cpu_reset() that would operate on QOM objects. All callers have been updated except for one in target-mips, so drop all implementations except for the one in target-mips and move the declaration there until MIPSCPU reset can be fully QOM'ified. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris) Acked-by: Alexander Graf <agraf@suse.de> (for ppc) Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04target-sh4: Let cpu_sh4_init() return SuperHCPUAndreas Färber
Turn cpu_init macro into a static inline function returning CPUSH4State for backwards compatibility. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-30target-sh4: Start QOM'ifying CPU initAndreas Färber
Move code from cpu_sh4_init() into a QOM initfn. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-30target-sh4: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() to QOM superh_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-30target-sh4: QOM'ify CPUAndreas Färber
Embed CPUSH4State as first member of SuperHCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-14Use uintptr_t for various op related functionsBlue Swirl
Use uintptr_t instead of void * or unsigned long in several op related functions, env->mem_io_pc and GETPC() macro. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-sh4: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc] sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename cpu_reset() to cpu_state_reset()Andreas Färber
Frees the identifier cpu_reset for QOM CPUs (manual rename). Don't hide the parameter type behind explicit casts, use static functions with strongly typed argument to indirect. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-28target-sh4: Clean includesStefan Weil
Remove some include statements which are not needed. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-01-10target-sh4: ignore ocbp and ocbwb instructionsAurelien Jarno
ocbp and ocbwb controls the writeback of a cache line to memory. They are supposed to do nothing in case of a cache miss. Given QEMU only partially emulate caches, it is safe to ignore these instructions. This fixes a kernel oops when trying to access an rtl8139 NIC with recent versions. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-01-07target-sh4: Fix operands for fipr, ftrv instructionsStefan Weil
Coverity complained about right shifts of opcode (16, 18) which were larger than the size of opcode (16 bit). Using the correct shift values fixes this. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-12-05Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori