aboutsummaryrefslogtreecommitdiff
path: root/tests/ahci-test.c
diff options
context:
space:
mode:
authorJohn Snow <jsnow@redhat.com>2014-08-21 13:44:37 -0400
committerStefan Hajnoczi <stefanha@redhat.com>2014-09-22 11:39:42 +0100
commitc2f3029fbc5e7beb4cfb7ac264e10838fada524e (patch)
treedd5b88eb9ef9e3243e29454a0432f969198ee572 /tests/ahci-test.c
parentfac7aa7fc2ebc26803b0a7b44b010f47ce3e1dd8 (diff)
ahci: Add test_hba_spec to ahci-test.
Add a test routine that checks the boot-up values of the HBA configuration memory space against the AHCI 1.3 specification and Intel ICH9 data sheet (for Q35 machines) for adherence and sane values. The HBA is not yet engaged or put into the idle state. [Replaced g_assert_false(...) with g_assert(!...) for glib <2.38 compatibility, reported by Peter Maydell <peter.maydell@linaro.org>. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1408643079-30675-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Diffstat (limited to 'tests/ahci-test.c')
-rw-r--r--tests/ahci-test.c561
1 files changed, 560 insertions, 1 deletions
diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index ee41b411ce..9d5a7870d9 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -53,21 +53,242 @@
#define AHCI_INTEL_ICH9 (PCI_DEVICE_ID_INTEL_Q35_AHCI << 16 | \
PCI_VENDOR_ID_INTEL)
+/*** AHCI/HBA Register Offsets and Bitmasks ***/
+#define AHCI_CAP (0)
+#define AHCI_CAP_NP (0x1F)
+#define AHCI_CAP_SXS (0x20)
+#define AHCI_CAP_EMS (0x40)
+#define AHCI_CAP_CCCS (0x80)
+#define AHCI_CAP_NCS (0x1F00)
+#define AHCI_CAP_PSC (0x2000)
+#define AHCI_CAP_SSC (0x4000)
+#define AHCI_CAP_PMD (0x8000)
+#define AHCI_CAP_FBSS (0x10000)
+#define AHCI_CAP_SPM (0x20000)
+#define AHCI_CAP_SAM (0x40000)
+#define AHCI_CAP_RESERVED (0x80000)
+#define AHCI_CAP_ISS (0xF00000)
+#define AHCI_CAP_SCLO (0x1000000)
+#define AHCI_CAP_SAL (0x2000000)
+#define AHCI_CAP_SALP (0x4000000)
+#define AHCI_CAP_SSS (0x8000000)
+#define AHCI_CAP_SMPS (0x10000000)
+#define AHCI_CAP_SSNTF (0x20000000)
+#define AHCI_CAP_SNCQ (0x40000000)
+#define AHCI_CAP_S64A (0x80000000)
+
+#define AHCI_GHC (1)
+#define AHCI_GHC_HR (0x01)
+#define AHCI_GHC_IE (0x02)
+#define AHCI_GHC_MRSM (0x04)
+#define AHCI_GHC_RESERVED (0x7FFFFFF8)
+#define AHCI_GHC_AE (0x80000000)
+
+#define AHCI_IS (2)
+#define AHCI_PI (3)
+#define AHCI_VS (4)
+
+#define AHCI_CCCCTL (5)
+#define AHCI_CCCCTL_EN (0x01)
+#define AHCI_CCCCTL_RESERVED (0x06)
+#define AHCI_CCCCTL_CC (0xFF00)
+#define AHCI_CCCCTL_TV (0xFFFF0000)
+
+#define AHCI_CCCPORTS (6)
+#define AHCI_EMLOC (7)
+
+#define AHCI_EMCTL (8)
+#define AHCI_EMCTL_STSMR (0x01)
+#define AHCI_EMCTL_CTLTM (0x100)
+#define AHCI_EMCTL_CTLRST (0x200)
+#define AHCI_EMCTL_RESERVED (0xF0F0FCFE)
+
+#define AHCI_CAP2 (9)
+#define AHCI_CAP2_BOH (0x01)
+#define AHCI_CAP2_NVMP (0x02)
+#define AHCI_CAP2_APST (0x04)
+#define AHCI_CAP2_RESERVED (0xFFFFFFF8)
+
+#define AHCI_BOHC (10)
+#define AHCI_RESERVED (11)
+#define AHCI_NVMHCI (24)
+#define AHCI_VENDOR (40)
+#define AHCI_PORTS (64)
+
+/*** Port Memory Offsets & Bitmasks ***/
+#define AHCI_PX_CLB (0)
+#define AHCI_PX_CLB_RESERVED (0x1FF)
+
+#define AHCI_PX_CLBU (1)
+
+#define AHCI_PX_FB (2)
+#define AHCI_PX_FB_RESERVED (0xFF)
+
+#define AHCI_PX_FBU (3)
+
+#define AHCI_PX_IS (4)
+#define AHCI_PX_IS_DHRS (0x1)
+#define AHCI_PX_IS_PSS (0x2)
+#define AHCI_PX_IS_DSS (0x4)
+#define AHCI_PX_IS_SDBS (0x8)
+#define AHCI_PX_IS_UFS (0x10)
+#define AHCI_PX_IS_DPS (0x20)
+#define AHCI_PX_IS_PCS (0x40)
+#define AHCI_PX_IS_DMPS (0x80)
+#define AHCI_PX_IS_RESERVED (0x23FFF00)
+#define AHCI_PX_IS_PRCS (0x400000)
+#define AHCI_PX_IS_IPMS (0x800000)
+#define AHCI_PX_IS_OFS (0x1000000)
+#define AHCI_PX_IS_INFS (0x4000000)
+#define AHCI_PX_IS_IFS (0x8000000)
+#define AHCI_PX_IS_HBDS (0x10000000)
+#define AHCI_PX_IS_HBFS (0x20000000)
+#define AHCI_PX_IS_TFES (0x40000000)
+#define AHCI_PX_IS_CPDS (0x80000000)
+
+#define AHCI_PX_IE (5)
+#define AHCI_PX_IE_DHRE (0x1)
+#define AHCI_PX_IE_PSE (0x2)
+#define AHCI_PX_IE_DSE (0x4)
+#define AHCI_PX_IE_SDBE (0x8)
+#define AHCI_PX_IE_UFE (0x10)
+#define AHCI_PX_IE_DPE (0x20)
+#define AHCI_PX_IE_PCE (0x40)
+#define AHCI_PX_IE_DMPE (0x80)
+#define AHCI_PX_IE_RESERVED (0x23FFF00)
+#define AHCI_PX_IE_PRCE (0x400000)
+#define AHCI_PX_IE_IPME (0x800000)
+#define AHCI_PX_IE_OFE (0x1000000)
+#define AHCI_PX_IE_INFE (0x4000000)
+#define AHCI_PX_IE_IFE (0x8000000)
+#define AHCI_PX_IE_HBDE (0x10000000)
+#define AHCI_PX_IE_HBFE (0x20000000)
+#define AHCI_PX_IE_TFEE (0x40000000)
+#define AHCI_PX_IE_CPDE (0x80000000)
+
+#define AHCI_PX_CMD (6)
+#define AHCI_PX_CMD_ST (0x1)
+#define AHCI_PX_CMD_SUD (0x2)
+#define AHCI_PX_CMD_POD (0x4)
+#define AHCI_PX_CMD_CLO (0x8)
+#define AHCI_PX_CMD_FRE (0x10)
+#define AHCI_PX_CMD_RESERVED (0xE0)
+#define AHCI_PX_CMD_CCS (0x1F00)
+#define AHCI_PX_CMD_MPSS (0x2000)
+#define AHCI_PX_CMD_FR (0x4000)
+#define AHCI_PX_CMD_CR (0x8000)
+#define AHCI_PX_CMD_CPS (0x10000)
+#define AHCI_PX_CMD_PMA (0x20000)
+#define AHCI_PX_CMD_HPCP (0x40000)
+#define AHCI_PX_CMD_MPSP (0x80000)
+#define AHCI_PX_CMD_CPD (0x100000)
+#define AHCI_PX_CMD_ESP (0x200000)
+#define AHCI_PX_CMD_FBSCP (0x400000)
+#define AHCI_PX_CMD_APSTE (0x800000)
+#define AHCI_PX_CMD_ATAPI (0x1000000)
+#define AHCI_PX_CMD_DLAE (0x2000000)
+#define AHCI_PX_CMD_ALPE (0x4000000)
+#define AHCI_PX_CMD_ASP (0x8000000)
+#define AHCI_PX_CMD_ICC (0xF0000000)
+
+#define AHCI_PX_RES1 (7)
+
+#define AHCI_PX_TFD (8)
+#define AHCI_PX_TFD_STS (0xFF)
+#define AHCI_PX_TFD_STS_ERR (0x01)
+#define AHCI_PX_TFD_STS_CS1 (0x06)
+#define AHCI_PX_TFD_STS_DRQ (0x08)
+#define AHCI_PX_TFD_STS_CS2 (0x70)
+#define AHCI_PX_TFD_STS_BSY (0x80)
+#define AHCI_PX_TFD_ERR (0xFF00)
+#define AHCI_PX_TFD_RESERVED (0xFFFF0000)
+
+#define AHCI_PX_SIG (9)
+#define AHCI_PX_SIG_SECTOR_COUNT (0xFF)
+#define AHCI_PX_SIG_LBA_LOW (0xFF00)
+#define AHCI_PX_SIG_LBA_MID (0xFF0000)
+#define AHCI_PX_SIG_LBA_HIGH (0xFF000000)
+
+#define AHCI_PX_SSTS (10)
+#define AHCI_PX_SSTS_DET (0x0F)
+#define AHCI_PX_SSTS_SPD (0xF0)
+#define AHCI_PX_SSTS_IPM (0xF00)
+#define AHCI_PX_SSTS_RESERVED (0xFFFFF000)
+#define SSTS_DET_NO_DEVICE (0x00)
+#define SSTS_DET_PRESENT (0x01)
+#define SSTS_DET_ESTABLISHED (0x03)
+#define SSTS_DET_OFFLINE (0x04)
+
+#define AHCI_PX_SCTL (11)
+
+#define AHCI_PX_SERR (12)
+#define AHCI_PX_SERR_ERR (0xFFFF)
+#define AHCI_PX_SERR_DIAG (0xFFFF0000)
+#define AHCI_PX_SERR_DIAG_X (0x04000000)
+
+#define AHCI_PX_SACT (13)
+#define AHCI_PX_CI (14)
+#define AHCI_PX_SNTF (15)
+
+#define AHCI_PX_FBS (16)
+#define AHCI_PX_FBS_EN (0x1)
+#define AHCI_PX_FBS_DEC (0x2)
+#define AHCI_PX_FBS_SDE (0x4)
+#define AHCI_PX_FBS_DEV (0xF00)
+#define AHCI_PX_FBS_ADO (0xF000)
+#define AHCI_PX_FBS_DWE (0xF0000)
+#define AHCI_PX_FBS_RESERVED (0xFFF000F8)
+
+#define AHCI_PX_RES2 (17)
+#define AHCI_PX_VS (28)
+
+#define HBA_DATA_REGION_SIZE (256)
+#define HBA_PORT_DATA_SIZE (128)
+#define HBA_PORT_NUM_REG (HBA_PORT_DATA_SIZE/4)
+
+#define AHCI_VERSION_0_95 (0x00000905)
+#define AHCI_VERSION_1_0 (0x00010000)
+#define AHCI_VERSION_1_1 (0x00010100)
+#define AHCI_VERSION_1_2 (0x00010200)
+#define AHCI_VERSION_1_3 (0x00010300)
+
+typedef struct HBACap {
+ uint32_t cap;
+ uint32_t cap2;
+} HBACap;
+
/*** Globals ***/
static QGuestAllocator *guest_malloc;
static QPCIBus *pcibus;
+static uint64_t barsize;
static char tmp_path[] = "/tmp/qtest.XXXXXX";
static bool ahci_pedantic;
static uint32_t ahci_fingerprint;
/*** Macro Utilities ***/
+#define BITANY(data, mask) (((data) & (mask)) != 0)
+#define BITSET(data, mask) (((data) & (mask)) == (mask))
+#define BITCLR(data, mask) (((data) & (mask)) == 0)
#define ASSERT_BIT_SET(data, mask) g_assert_cmphex((data) & (mask), ==, (mask))
#define ASSERT_BIT_CLEAR(data, mask) g_assert_cmphex((data) & (mask), ==, 0)
+/*** IO macros for the AHCI memory registers. ***/
+#define AHCI_READ(OFST) qpci_io_readl(ahci, hba_base + (OFST))
+#define AHCI_WRITE(OFST, VAL) qpci_io_writel(ahci, hba_base + (OFST), (VAL))
+#define AHCI_RREG(regno) AHCI_READ(4 * (regno))
+#define AHCI_WREG(regno, val) AHCI_WRITE(4 * (regno), (val))
+
+/*** IO macros for port-specific offsets inside of AHCI memory. ***/
+#define PX_OFST(port, regno) (HBA_PORT_NUM_REG * (port) + AHCI_PORTS + (regno))
+#define PX_RREG(port, regno) AHCI_RREG(PX_OFST((port), (regno)))
+#define PX_WREG(port, regno, val) AHCI_WREG(PX_OFST((port), (regno)), (val))
+
/*** Function Declarations ***/
static QPCIDevice *get_ahci_device(void);
static QPCIDevice *start_ahci_device(QPCIDevice *dev, void **hba_base);
static void free_ahci_device(QPCIDevice *dev);
+static void ahci_test_port_spec(QPCIDevice *ahci, void *hba_base,
+ HBACap *hcap, uint8_t port);
static void ahci_test_pci_spec(QPCIDevice *ahci);
static void ahci_test_pci_caps(QPCIDevice *ahci, uint16_t header,
uint8_t offset);
@@ -112,6 +333,9 @@ static void free_ahci_device(QPCIDevice *ahci)
qpci_free_pc(pcibus);
pcibus = NULL;
}
+
+ /* Clear our cached barsize information. */
+ barsize = 0;
}
/*** Test Setup & Teardown ***/
@@ -200,7 +424,7 @@ static void ahci_pci_enable(QPCIDevice *ahci, void **hba_base)
static QPCIDevice *start_ahci_device(QPCIDevice *ahci, void **hba_base)
{
/* Map AHCI's ABAR (BAR5) */
- *hba_base = qpci_iomap(ahci, 5, NULL);
+ *hba_base = qpci_iomap(ahci, 5, &barsize);
/* turns on pci.cmd.iose, pci.cmd.mse and pci.cmd.bme */
qpci_device_enable(ahci);
@@ -441,6 +665,325 @@ static void ahci_test_pmcap(QPCIDevice *ahci, uint8_t offset)
ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_DATA_SCALE_MASK);
}
+static void ahci_test_hba_spec(QPCIDevice *ahci, void *hba_base)
+{
+ HBACap hcap;
+ unsigned i;
+ uint32_t cap, cap2, reg;
+ uint32_t ports;
+ uint8_t nports_impl;
+ uint8_t maxports;
+
+ g_assert(ahci != 0);
+ g_assert(hba_base != 0);
+
+ /*
+ * Note that the AHCI spec does expect the BIOS to set up a few things:
+ * CAP.SSS - Support for staggered spin-up (t/f)
+ * CAP.SMPS - Support for mechanical presence switches (t/f)
+ * PI - Ports Implemented (1-32)
+ * PxCMD.HPCP - Hot Plug Capable Port
+ * PxCMD.MPSP - Mechanical Presence Switch Present
+ * PxCMD.CPD - Cold Presence Detection support
+ *
+ * Additional items are touched if CAP.SSS is on, see AHCI 10.1.1 p.97:
+ * Foreach Port Implemented:
+ * -PxCMD.ST, PxCMD.CR, PxCMD.FRE, PxCMD.FR, PxSCTL.DET are 0
+ * -PxCLB/U and PxFB/U are set to valid regions in memory
+ * -PxSUD is set to 1.
+ * -PxSSTS.DET is polled for presence; if detected, we continue:
+ * -PxSERR is cleared with 1's.
+ * -If PxTFD.STS.BSY, PxTFD.STS.DRQ, and PxTFD.STS.ERR are all zero,
+ * the device is ready.
+ */
+
+ /* 1 CAP - Capabilities Register */
+ cap = AHCI_RREG(AHCI_CAP);
+ ASSERT_BIT_CLEAR(cap, AHCI_CAP_RESERVED);
+
+ /* 2 GHC - Global Host Control */
+ reg = AHCI_RREG(AHCI_GHC);
+ ASSERT_BIT_CLEAR(reg, AHCI_GHC_HR);
+ ASSERT_BIT_CLEAR(reg, AHCI_GHC_IE);
+ ASSERT_BIT_CLEAR(reg, AHCI_GHC_MRSM);
+ if (BITSET(cap, AHCI_CAP_SAM)) {
+ g_test_message("Supports AHCI-Only Mode: GHC_AE is Read-Only.");
+ ASSERT_BIT_SET(reg, AHCI_GHC_AE);
+ } else {
+ g_test_message("Supports AHCI/Legacy mix.");
+ ASSERT_BIT_CLEAR(reg, AHCI_GHC_AE);
+ }
+
+ /* 3 IS - Interrupt Status */
+ reg = AHCI_RREG(AHCI_IS);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* 4 PI - Ports Implemented */
+ ports = AHCI_RREG(AHCI_PI);
+ /* Ports Implemented must be non-zero. */
+ g_assert_cmphex(ports, !=, 0);
+ /* Ports Implemented must be <= Number of Ports. */
+ nports_impl = ctpopl(ports);
+ g_assert_cmpuint(((AHCI_CAP_NP & cap) + 1), >=, nports_impl);
+
+ g_assert_cmphex(barsize, >, 0);
+ /* Ports must be within the proper range. Given a mapping of SIZE,
+ * 256 bytes are used for global HBA control, and the rest is used
+ * for ports data, at 0x80 bytes each. */
+ maxports = (barsize - HBA_DATA_REGION_SIZE) / HBA_PORT_DATA_SIZE;
+ /* e.g, 30 ports for 4K of memory. (4096 - 256) / 128 = 30 */
+ g_assert_cmphex((reg >> maxports), ==, 0);
+
+ /* 5 AHCI Version */
+ reg = AHCI_RREG(AHCI_VS);
+ switch (reg) {
+ case AHCI_VERSION_0_95:
+ case AHCI_VERSION_1_0:
+ case AHCI_VERSION_1_1:
+ case AHCI_VERSION_1_2:
+ case AHCI_VERSION_1_3:
+ break;
+ default:
+ g_assert_not_reached();
+ }
+
+ /* 6 Command Completion Coalescing Control: depends on CAP.CCCS. */
+ reg = AHCI_RREG(AHCI_CCCCTL);
+ if (BITSET(cap, AHCI_CAP_CCCS)) {
+ ASSERT_BIT_CLEAR(reg, AHCI_CCCCTL_EN);
+ ASSERT_BIT_CLEAR(reg, AHCI_CCCCTL_RESERVED);
+ ASSERT_BIT_SET(reg, AHCI_CCCCTL_CC);
+ ASSERT_BIT_SET(reg, AHCI_CCCCTL_TV);
+ } else {
+ g_assert_cmphex(reg, ==, 0);
+ }
+
+ /* 7 CCC_PORTS */
+ reg = AHCI_RREG(AHCI_CCCPORTS);
+ /* Must be zeroes initially regardless of CAP.CCCS */
+ g_assert_cmphex(reg, ==, 0);
+
+ /* 8 EM_LOC */
+ reg = AHCI_RREG(AHCI_EMLOC);
+ if (BITCLR(cap, AHCI_CAP_EMS)) {
+ g_assert_cmphex(reg, ==, 0);
+ }
+
+ /* 9 EM_CTL */
+ reg = AHCI_RREG(AHCI_EMCTL);
+ if (BITSET(cap, AHCI_CAP_EMS)) {
+ ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_STSMR);
+ ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_CTLTM);
+ ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_CTLRST);
+ ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_RESERVED);
+ } else {
+ g_assert_cmphex(reg, ==, 0);
+ }
+
+ /* 10 CAP2 -- Capabilities Extended */
+ cap2 = AHCI_RREG(AHCI_CAP2);
+ ASSERT_BIT_CLEAR(cap2, AHCI_CAP2_RESERVED);
+
+ /* 11 BOHC -- Bios/OS Handoff Control */
+ reg = AHCI_RREG(AHCI_BOHC);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* 12 -- 23: Reserved */
+ g_test_message("Verifying HBA reserved area is empty.");
+ for (i = AHCI_RESERVED; i < AHCI_NVMHCI; ++i) {
+ reg = AHCI_RREG(i);
+ g_assert_cmphex(reg, ==, 0);
+ }
+
+ /* 24 -- 39: NVMHCI */
+ if (BITCLR(cap2, AHCI_CAP2_NVMP)) {
+ g_test_message("Verifying HBA/NVMHCI area is empty.");
+ for (i = AHCI_NVMHCI; i < AHCI_VENDOR; ++i) {
+ reg = AHCI_RREG(i);
+ g_assert_cmphex(reg, ==, 0);
+ }
+ }
+
+ /* 40 -- 63: Vendor */
+ g_test_message("Verifying HBA/Vendor area is empty.");
+ for (i = AHCI_VENDOR; i < AHCI_PORTS; ++i) {
+ reg = AHCI_RREG(i);
+ g_assert_cmphex(reg, ==, 0);
+ }
+
+ /* 64 -- XX: Port Space */
+ hcap.cap = cap;
+ hcap.cap2 = cap2;
+ for (i = 0; ports || (i < maxports); ports >>= 1, ++i) {
+ if (BITSET(ports, 0x1)) {
+ g_test_message("Testing port %u for spec", i);
+ ahci_test_port_spec(ahci, hba_base, &hcap, i);
+ } else {
+ uint16_t j;
+ uint16_t low = AHCI_PORTS + (32 * i);
+ uint16_t high = AHCI_PORTS + (32 * (i + 1));
+ g_test_message("Asserting unimplemented port %u "
+ "(reg [%u-%u]) is empty.",
+ i, low, high - 1);
+ for (j = low; j < high; ++j) {
+ reg = AHCI_RREG(j);
+ g_assert_cmphex(reg, ==, 0);
+ }
+ }
+ }
+}
+
+/**
+ * Test the memory space for one port for specification adherence.
+ */
+static void ahci_test_port_spec(QPCIDevice *ahci, void *hba_base,
+ HBACap *hcap, uint8_t port)
+{
+ uint32_t reg;
+ unsigned i;
+
+ /* (0) CLB */
+ reg = PX_RREG(port, AHCI_PX_CLB);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CLB_RESERVED);
+
+ /* (1) CLBU */
+ if (BITCLR(hcap->cap, AHCI_CAP_S64A)) {
+ reg = PX_RREG(port, AHCI_PX_CLBU);
+ g_assert_cmphex(reg, ==, 0);
+ }
+
+ /* (2) FB */
+ reg = PX_RREG(port, AHCI_PX_FB);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_FB_RESERVED);
+
+ /* (3) FBU */
+ if (BITCLR(hcap->cap, AHCI_CAP_S64A)) {
+ reg = PX_RREG(port, AHCI_PX_FBU);
+ g_assert_cmphex(reg, ==, 0);
+ }
+
+ /* (4) IS */
+ reg = PX_RREG(port, AHCI_PX_IS);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* (5) IE */
+ reg = PX_RREG(port, AHCI_PX_IE);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* (6) CMD */
+ reg = PX_RREG(port, AHCI_PX_CMD);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FRE);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_RESERVED);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CCS);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FR);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CR);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_PMA); /* And RW only if CAP.SPM */
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_APSTE); /* RW only if CAP2.APST */
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ATAPI);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_DLAE);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ALPE); /* RW only if CAP.SALP */
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ASP); /* RW only if CAP.SALP */
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ICC);
+ /* If CPDetect support does not exist, CPState must be off. */
+ if (BITCLR(reg, AHCI_PX_CMD_CPD)) {
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CPS);
+ }
+ /* If MPSPresence is not set, MPSState must be off. */
+ if (BITCLR(reg, AHCI_PX_CMD_MPSP)) {
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_MPSS);
+ }
+ /* If we do not support MPS, MPSS and MPSP must be off. */
+ if (BITCLR(hcap->cap, AHCI_CAP_SMPS)) {
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_MPSS);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_MPSP);
+ }
+ /* If, via CPD or MPSP we detect a drive, HPCP must be on. */
+ if (BITANY(reg, AHCI_PX_CMD_CPD || AHCI_PX_CMD_MPSP)) {
+ ASSERT_BIT_SET(reg, AHCI_PX_CMD_HPCP);
+ }
+ /* HPCP and ESP cannot both be active. */
+ g_assert(!BITSET(reg, AHCI_PX_CMD_HPCP | AHCI_PX_CMD_ESP));
+ /* If CAP.FBSS is not set, FBSCP must not be set. */
+ if (BITCLR(hcap->cap, AHCI_CAP_FBSS)) {
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FBSCP);
+ }
+
+ /* (7) RESERVED */
+ reg = PX_RREG(port, AHCI_PX_RES1);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* (8) TFD */
+ reg = PX_RREG(port, AHCI_PX_TFD);
+ /* At boot, prior to an FIS being received, the TFD register should be 0x7F,
+ * which breaks down as follows, as seen in AHCI 1.3 sec 3.3.8, p. 27. */
+ ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_ERR);
+ ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_CS1);
+ ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_DRQ);
+ ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_CS2);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_BSY);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_RESERVED);
+
+ /* (9) SIG */
+ /* Though AHCI specifies the boot value should be 0xFFFFFFFF,
+ * Even when GHC.ST is zero, the AHCI HBA may receive the initial
+ * D2H register FIS and update the signature asynchronously,
+ * so we cannot expect a value here. AHCI 1.3, sec 3.3.9, pp 27-28 */
+
+ /* (10) SSTS / SCR0: SStatus */
+ reg = PX_RREG(port, AHCI_PX_SSTS);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_SSTS_RESERVED);
+ /* Even though the register should be 0 at boot, it is asynchronous and
+ * prone to change, so we cannot test any well known value. */
+
+ /* (11) SCTL / SCR2: SControl */
+ reg = PX_RREG(port, AHCI_PX_SCTL);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* (12) SERR / SCR1: SError */
+ reg = PX_RREG(port, AHCI_PX_SERR);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* (13) SACT / SCR3: SActive */
+ reg = PX_RREG(port, AHCI_PX_SACT);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* (14) CI */
+ reg = PX_RREG(port, AHCI_PX_CI);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* (15) SNTF */
+ reg = PX_RREG(port, AHCI_PX_SNTF);
+ g_assert_cmphex(reg, ==, 0);
+
+ /* (16) FBS */
+ reg = PX_RREG(port, AHCI_PX_FBS);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_EN);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DEC);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_SDE);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DEV);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DWE);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_RESERVED);
+ if (BITSET(hcap->cap, AHCI_CAP_FBSS)) {
+ /* if Port-Multiplier FIS-based switching avail, ADO must >= 2 */
+ g_assert((reg & AHCI_PX_FBS_ADO) >> ctzl(AHCI_PX_FBS_ADO) >= 2);
+ }
+
+ /* [17 -- 27] RESERVED */
+ for (i = AHCI_PX_RES2; i < AHCI_PX_VS; ++i) {
+ reg = PX_RREG(port, i);
+ g_assert_cmphex(reg, ==, 0);
+ }
+
+ /* [28 -- 31] Vendor-Specific */
+ for (i = AHCI_PX_VS; i < 32; ++i) {
+ reg = PX_RREG(port, i);
+ if (reg) {
+ g_test_message("INFO: Vendor register %u non-empty", i);
+ }
+ }
+}
+
/******************************************************************************/
/* Test Interfaces */
/******************************************************************************/
@@ -480,6 +1023,21 @@ static void test_pci_enable(void)
ahci_shutdown(ahci);
}
+/**
+ * Investigate the memory mapped regions of the HBA,
+ * and test them for AHCI specification adherence.
+ */
+static void test_hba_spec(void)
+{
+ QPCIDevice *ahci;
+ void *hba_base;
+
+ ahci = ahci_boot();
+ ahci_pci_enable(ahci, &hba_base);
+ ahci_test_hba_spec(ahci, hba_base);
+ ahci_shutdown(ahci);
+}
+
/******************************************************************************/
int main(int argc, char **argv)
@@ -532,6 +1090,7 @@ int main(int argc, char **argv)
qtest_add_func("/ahci/sanity", test_sanity);
qtest_add_func("/ahci/pci_spec", test_pci_spec);
qtest_add_func("/ahci/pci_enable", test_pci_enable);
+ qtest_add_func("/ahci/hba_spec", test_hba_spec);
ret = g_test_run();