aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPeter Maydell <peter.maydell@linaro.org>2020-03-09 21:58:18 +0000
committerPeter Maydell <peter.maydell@linaro.org>2020-03-12 11:20:20 +0000
commit6fe6d6c9a953901251e1a85088f0a61ff5caf648 (patch)
tree1a6fd6d7c792d6bcebe4313d1795f3b4c4eac047
parent34f18ab14d7197d13d7e93300e3b9a3853c7efc8 (diff)
docs: Be consistent about capitalization of 'Arm'pull-docs-20200312docs.nextdocs.for-upstream
The company 'Arm' went through a rebranding some years back involving a recapitalization from 'ARM' to 'Arm'. As a result our documentation is a bit inconsistent between the two forms. It's not worth trying to update everywhere in QEMU, but it's easy enough to make docs/ consistent. Note that "ARMv8" and similar architecture names, and older CPU names like "ARM926" still retain all-caps. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200309215818.2021-6-peter.maydell@linaro.org
-rw-r--r--docs/can.txt2
-rw-r--r--docs/devel/atomics.txt2
-rw-r--r--docs/devel/kconfig.rst2
-rw-r--r--docs/devel/loads-stores.rst2
-rw-r--r--docs/devel/multi-thread-tcg.txt8
-rw-r--r--docs/devel/tcg.rst2
-rw-r--r--docs/replay.txt2
-rw-r--r--docs/specs/fw_cfg.txt2
-rw-r--r--docs/specs/tpm.rst6
-rw-r--r--docs/system/arm/cpu-features.rst4
-rw-r--r--docs/system/arm/integratorcp.rst2
-rw-r--r--docs/system/arm/musicpal.rst2
-rw-r--r--docs/system/arm/nseries.rst2
-rw-r--r--docs/system/arm/palm.rst2
-rw-r--r--docs/system/arm/realview.rst4
-rw-r--r--docs/system/arm/sx1.rst2
-rw-r--r--docs/system/arm/versatile.rst2
-rw-r--r--docs/system/arm/xscale.rst2
-rw-r--r--docs/user/main.rst8
19 files changed, 29 insertions, 29 deletions
diff --git a/docs/can.txt b/docs/can.txt
index 9fa6ed51c8..11ed8f2d68 100644
--- a/docs/can.txt
+++ b/docs/can.txt
@@ -13,7 +13,7 @@ controller is implemented.
The PCI addon card hardware has been selected as the first CAN
interface to implement because such device can be easily connected
-to systems with different CPU architectures (x86, PowerPC, ARM, etc.).
+to systems with different CPU architectures (x86, PowerPC, Arm, etc.).
The project has been initially started in frame of RTEMS GSoC 2013
slot by Jin Yang under our mentoring The initial idea was to provide generic
diff --git a/docs/devel/atomics.txt b/docs/devel/atomics.txt
index a4db3a4aaa..67bdf82628 100644
--- a/docs/devel/atomics.txt
+++ b/docs/devel/atomics.txt
@@ -87,7 +87,7 @@ Sequentially consistent loads and stores can be done using:
atomic_xchg(ptr, val) for stores
However, they are quite expensive on some platforms, notably POWER and
-ARM. Therefore, qemu/atomic.h provides two primitives with slightly
+Arm. Therefore, qemu/atomic.h provides two primitives with slightly
weaker constraints:
typeof(*ptr) atomic_mb_read(ptr)
diff --git a/docs/devel/kconfig.rst b/docs/devel/kconfig.rst
index b7bca44704..e5df72b342 100644
--- a/docs/devel/kconfig.rst
+++ b/docs/devel/kconfig.rst
@@ -8,7 +8,7 @@ time different targets can share large amounts of code. For example,
a POWER and an x86 board can run the same code to emulate a PCI network
card, even though the boards use different PCI host bridges, and they
can run the same code to emulate a SCSI disk while using different
-SCSI adapters. ARM, s390 and x86 boards can all present a virtio-blk
+SCSI adapters. Arm, s390 and x86 boards can all present a virtio-blk
disk to their guests, but with three different virtio guest interfaces.
Each QEMU target enables a subset of the boards, devices and buses that
diff --git a/docs/devel/loads-stores.rst b/docs/devel/loads-stores.rst
index 03aa9e7ff8..0d99eb24c1 100644
--- a/docs/devel/loads-stores.rst
+++ b/docs/devel/loads-stores.rst
@@ -302,7 +302,7 @@ way QEMU defines the view of memory that a device or CPU has.
or bus fabric.)
Each CPU has an AddressSpace. Some kinds of CPU have more than
-one AddressSpace (for instance ARM guest CPUs have an AddressSpace
+one AddressSpace (for instance Arm guest CPUs have an AddressSpace
for the Secure world and one for NonSecure if they implement TrustZone).
Devices which can do DMA-type operations should generally have an
AddressSpace. There is also a "system address space" which typically
diff --git a/docs/devel/multi-thread-tcg.txt b/docs/devel/multi-thread-tcg.txt
index 782bebc28b..3c85ac0eab 100644
--- a/docs/devel/multi-thread-tcg.txt
+++ b/docs/devel/multi-thread-tcg.txt
@@ -227,7 +227,7 @@ minimise contention.
(Current solution)
MMIO access automatically serialises hardware emulation by way of the
-BQL. Currently ARM targets serialise all ARM_CP_IO register accesses
+BQL. Currently Arm targets serialise all ARM_CP_IO register accesses
and also defer the reset/startup of vCPUs to the vCPU context by way
of async_run_on_cpu().
@@ -268,7 +268,7 @@ ordered backends this could become a NOP.
Aside from explicit standalone memory barrier instructions there are
also implicit memory ordering semantics which comes with each guest
memory access instruction. For example all x86 load/stores come with
-fairly strong guarantees of sequential consistency where as ARM has
+fairly strong guarantees of sequential consistency whereas Arm has
special variants of load/store instructions that imply acquire/release
semantics.
@@ -317,7 +317,7 @@ x86 cmpxchg instruction.
The second type offer a pair of load/store instructions which offer a
guarantee that a region of memory has not been touched between the
-load and store instructions. An example of this is ARM's ldrex/strex
+load and store instructions. An example of this is Arm's ldrex/strex
pair where the strex instruction will return a flag indicating a
successful store only if no other CPU has accessed the memory region
since the ldrex.
@@ -339,7 +339,7 @@ CURRENT OPEN QUESTIONS:
The TCG provides a number of atomic helpers (tcg_gen_atomic_*) which
can be used directly or combined to emulate other instructions like
-ARM's ldrex/strex instructions. While they are susceptible to the ABA
+Arm's ldrex/strex instructions. While they are susceptible to the ABA
problem so far common guests have not implemented patterns where
this may be a problem - typically presenting a locking ABI which
assumes cmpxchg like semantics.
diff --git a/docs/devel/tcg.rst b/docs/devel/tcg.rst
index 4956a30a4e..4ebde44b9d 100644
--- a/docs/devel/tcg.rst
+++ b/docs/devel/tcg.rst
@@ -83,7 +83,7 @@ memory until the end of the translation block. This is done for internal
emulation state that is rarely accessed directly by the program and/or changes
very often throughout the execution of a translation block---this includes
condition codes on x86, delay slots on SPARC, conditional execution on
-ARM, and so on. This state is stored for each target instruction, and
+Arm, and so on. This state is stored for each target instruction, and
looked up on exceptions.
MMU emulation
diff --git a/docs/replay.txt b/docs/replay.txt
index f4619a62a3..70c27edb36 100644
--- a/docs/replay.txt
+++ b/docs/replay.txt
@@ -19,7 +19,7 @@ Deterministic replay has the following features:
the memory, state of the hardware devices, clocks, and screen of the VM.
* Writes execution log into the file for later replaying for multiple times
on different machines.
- * Supports i386, x86_64, and ARM hardware platforms.
+ * Supports i386, x86_64, and Arm hardware platforms.
* Performs deterministic replay of all operations with keyboard and mouse
input devices.
diff --git a/docs/specs/fw_cfg.txt b/docs/specs/fw_cfg.txt
index 08c00bdf44..8f1ebc66fa 100644
--- a/docs/specs/fw_cfg.txt
+++ b/docs/specs/fw_cfg.txt
@@ -82,7 +82,7 @@ Selector Register IOport: 0x510
Data Register IOport: 0x511
DMA Address IOport: 0x514
-=== ARM Register Locations ===
+=== Arm Register Locations ===
Selector Register address: Base + 8 (2 bytes)
Data Register address: Base + 0 (8 bytes)
diff --git a/docs/specs/tpm.rst b/docs/specs/tpm.rst
index da9eb39ca9..5e61238bc5 100644
--- a/docs/specs/tpm.rst
+++ b/docs/specs/tpm.rst
@@ -25,7 +25,7 @@ QEMU files related to TPM TIS interface:
Both an ISA device and a sysbus device are available. The former is
used with pc/q35 machine while the latter can be instantiated in the
-ARM virt machine.
+Arm virt machine.
CRB interface
-------------
@@ -331,7 +331,7 @@ In case a pSeries machine is emulated, use the following command line:
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,id=virtio-disk0 \
-drive file=test.img,format=raw,if=none,id=drive-virtio-disk0
-In case an ARM virt machine is emulated, use the following command line:
+In case an Arm virt machine is emulated, use the following command line:
.. code-block:: console
@@ -346,7 +346,7 @@ In case an ARM virt machine is emulated, use the following command line:
-drive if=pflash,format=raw,file=flash0.img,readonly \
-drive if=pflash,format=raw,file=flash1.img
- On ARM, ACPI boot with TPM is not yet supported.
+ On Arm, ACPI boot with TPM is not yet supported.
In case SeaBIOS is used as firmware, it should show the TPM menu item
after entering the menu with 'ESC'.
diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst
index 7495b7b672..2d5c06cd01 100644
--- a/docs/system/arm/cpu-features.rst
+++ b/docs/system/arm/cpu-features.rst
@@ -5,9 +5,9 @@ CPU features are optional features that a CPU of supporting type may
choose to implement or not. In QEMU, optional CPU features have
corresponding boolean CPU proprieties that, when enabled, indicate
that the feature is implemented, and, conversely, when disabled,
-indicate that it is not implemented. An example of an ARM CPU feature
+indicate that it is not implemented. An example of an Arm CPU feature
is the Performance Monitoring Unit (PMU). CPU types such as the
-Cortex-A15 and the Cortex-A57, which respectively implement ARM
+Cortex-A15 and the Cortex-A57, which respectively implement Arm
architecture reference manuals ARMv7-A and ARMv8-A, may both optionally
implement PMUs. For example, if a user wants to use a Cortex-A15 without
a PMU, then the `-cpu` parameter should contain `pmu=off` on the QEMU
diff --git a/docs/system/arm/integratorcp.rst b/docs/system/arm/integratorcp.rst
index 3232b43a08..e6f050f602 100644
--- a/docs/system/arm/integratorcp.rst
+++ b/docs/system/arm/integratorcp.rst
@@ -1,7 +1,7 @@
Integrator/CP (``integratorcp``)
================================
-The ARM Integrator/CP board is emulated with the following devices:
+The Arm Integrator/CP board is emulated with the following devices:
- ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU
diff --git a/docs/system/arm/musicpal.rst b/docs/system/arm/musicpal.rst
index 35c2221248..9de380edf8 100644
--- a/docs/system/arm/musicpal.rst
+++ b/docs/system/arm/musicpal.rst
@@ -4,7 +4,7 @@ Freecom MusicPal (``musicpal``)
The Freecom MusicPal internet radio emulation includes the following
elements:
-- Marvell MV88W8618 ARM core.
+- Marvell MV88W8618 Arm core.
- 32 MB RAM, 256 KB SRAM, 8 MB flash.
diff --git a/docs/system/arm/nseries.rst b/docs/system/arm/nseries.rst
index b000b6d13b..cd9edf5d88 100644
--- a/docs/system/arm/nseries.rst
+++ b/docs/system/arm/nseries.rst
@@ -4,7 +4,7 @@ Nokia N800 and N810 tablets (``n800``, ``n810``)
Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 /
48) emulation supports the following elements:
-- Texas Instruments OMAP2420 System-on-chip (ARM 1136 core)
+- Texas Instruments OMAP2420 System-on-chip (ARM1136 core)
- RAM and non-volatile OneNAND Flash memories
diff --git a/docs/system/arm/palm.rst b/docs/system/arm/palm.rst
index 0eabf63e0e..47ff9b36d4 100644
--- a/docs/system/arm/palm.rst
+++ b/docs/system/arm/palm.rst
@@ -4,7 +4,7 @@ Palm Tungsten|E PDA (``cheetah``)
The Palm Tungsten|E PDA (codename \"Cheetah\") emulation includes the
following elements:
-- Texas Instruments OMAP310 System-on-chip (ARM 925T core)
+- Texas Instruments OMAP310 System-on-chip (ARM925T core)
- ROM and RAM memories (ROM firmware image can be loaded with
-option-rom)
diff --git a/docs/system/arm/realview.rst b/docs/system/arm/realview.rst
index 8e08eb5da1..65f5be346b 100644
--- a/docs/system/arm/realview.rst
+++ b/docs/system/arm/realview.rst
@@ -1,7 +1,7 @@
Arm Realview boards (``realview-eb``, ``realview-eb-mpcore``, ``realview-pb-a8``, ``realview-pbx-a9``)
======================================================================================================
-Several variants of the ARM RealView baseboard are emulated, including
+Several variants of the Arm RealView baseboard are emulated, including
the EB, PB-A8 and PBX-A9. Due to interactions with the bootloader, only
certain Linux kernel configurations work out of the box on these boards.
@@ -14,7 +14,7 @@ The following devices are emulated:
- ARM926E, ARM1136, ARM11MPCore, Cortex-A8 or Cortex-A9 MPCore CPU
-- ARM AMBA Generic/Distributed Interrupt Controller
+- Arm AMBA Generic/Distributed Interrupt Controller
- Four PL011 UARTs
diff --git a/docs/system/arm/sx1.rst b/docs/system/arm/sx1.rst
index 321993bc09..8bce30d4b2 100644
--- a/docs/system/arm/sx1.rst
+++ b/docs/system/arm/sx1.rst
@@ -4,7 +4,7 @@ Siemens SX1 (``sx1``, ``sx1-v1``)
The Siemens SX1 models v1 and v2 (default) basic emulation. The
emulation includes the following elements:
-- Texas Instruments OMAP310 System-on-chip (ARM 925T core)
+- Texas Instruments OMAP310 System-on-chip (ARM925T core)
- ROM and RAM memories (ROM firmware image can be loaded with
-pflash) V1 1 Flash of 16MB and 1 Flash of 8MB V2 1 Flash of 32MB
diff --git a/docs/system/arm/versatile.rst b/docs/system/arm/versatile.rst
index 48b6ca0a02..51221c30a4 100644
--- a/docs/system/arm/versatile.rst
+++ b/docs/system/arm/versatile.rst
@@ -1,7 +1,7 @@
Arm Versatile boards (``versatileab``, ``versatilepb``)
=======================================================
-The ARM Versatile baseboard is emulated with the following devices:
+The Arm Versatile baseboard is emulated with the following devices:
- ARM926E, ARM1136 or Cortex-A8 CPU
diff --git a/docs/system/arm/xscale.rst b/docs/system/arm/xscale.rst
index 19da2eff35..89ec93e904 100644
--- a/docs/system/arm/xscale.rst
+++ b/docs/system/arm/xscale.rst
@@ -4,7 +4,7 @@ Sharp XScale-based PDA models (``akita``, ``borzoi``, ``spitz``, ``terrier``)
The XScale-based clamshell PDA models (\"Spitz\", \"Akita\", \"Borzoi\"
and \"Terrier\") emulation includes the following peripherals:
-- Intel PXA270 System-on-chip (ARM V5TE core)
+- Intel PXA270 System-on-chip (ARMv5TE core)
- NAND Flash memory
diff --git a/docs/user/main.rst b/docs/user/main.rst
index ca69f7727d..bd99b0fdbe 100644
--- a/docs/user/main.rst
+++ b/docs/user/main.rst
@@ -35,7 +35,7 @@ QEMU user space emulation has the following notable features:
On Linux, QEMU can emulate the ``clone`` syscall and create a real
host thread (with a separate virtual CPU) for each emulated thread.
Note that not all targets currently emulate atomic operations
- correctly. x86 and ARM use a global lock in order to preserve their
+ correctly. x86 and Arm use a global lock in order to preserve their
semantics.
QEMU was conceived so that ultimately it can emulate itself. Although it
@@ -173,11 +173,11 @@ Other binaries
user mode (Alpha)
``qemu-alpha`` TODO.
-user mode (ARM)
+user mode (Arm)
``qemu-armeb`` TODO.
-user mode (ARM)
-``qemu-arm`` is also capable of running ARM \"Angel\" semihosted ELF
+user mode (Arm)
+``qemu-arm`` is also capable of running Arm \"Angel\" semihosted ELF
binaries (as implemented by the arm-elf and arm-eabi Newlib/GDB
configurations), and arm-uclinux bFLT format binaries.