diff options
Diffstat (limited to 'include/linux')
33 files changed, 152 insertions, 65 deletions
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index c6d96a5f46fd..adf670ecaf94 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -148,6 +148,7 @@ struct ceph_osd_request_target { int size; int min_size; bool sort_bitwise; + bool recovery_deletes; unsigned int flags; /* CEPH_OSD_FLAG_* */ bool paused; diff --git a/include/linux/ceph/osdmap.h b/include/linux/ceph/osdmap.h index a0996cb9faed..af3444a5bfdd 100644 --- a/include/linux/ceph/osdmap.h +++ b/include/linux/ceph/osdmap.h @@ -272,6 +272,8 @@ bool ceph_is_new_interval(const struct ceph_osds *old_acting, u32 new_pg_num, bool old_sort_bitwise, bool new_sort_bitwise, + bool old_recovery_deletes, + bool new_recovery_deletes, const struct ceph_pg *pgid); bool ceph_osds_changed(const struct ceph_osds *old_acting, const struct ceph_osds *new_acting, diff --git a/include/linux/ceph/rados.h b/include/linux/ceph/rados.h index 385db08bb8b2..b8281feda9c7 100644 --- a/include/linux/ceph/rados.h +++ b/include/linux/ceph/rados.h @@ -158,6 +158,10 @@ extern const char *ceph_osd_state_name(int s); #define CEPH_OSDMAP_NOTIERAGENT (1<<13) /* disable tiering agent */ #define CEPH_OSDMAP_NOREBALANCE (1<<14) /* block osd backfill unless pg is degraded */ #define CEPH_OSDMAP_SORTBITWISE (1<<15) /* use bitwise hobject_t sort */ +#define CEPH_OSDMAP_REQUIRE_JEWEL (1<<16) /* require jewel for booting osds */ +#define CEPH_OSDMAP_REQUIRE_KRAKEN (1<<17) /* require kraken for booting osds */ +#define CEPH_OSDMAP_REQUIRE_LUMINOUS (1<<18) /* require l for booting osds */ +#define CEPH_OSDMAP_RECOVERY_DELETES (1<<19) /* deletes performed during recovery instead of peering */ /* * The error code to return when an OSD can't handle a write diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index b56573bf440d..82b30e638430 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -39,8 +39,6 @@ enum cpuhp_state { CPUHP_PCI_XGENE_DEAD, CPUHP_IOMMU_INTEL_DEAD, CPUHP_LUSTRE_CFS_DEAD, - CPUHP_SCSI_BNX2FC_DEAD, - CPUHP_SCSI_BNX2I_DEAD, CPUHP_WORKQUEUE_PREP, CPUHP_POWER_NUMA_PREPARE, CPUHP_HRTIMERS_PREPARE, diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 119a3f9604b0..898cfe2eeb42 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -18,6 +18,19 @@ #ifdef CONFIG_CPUSETS +/* + * Static branch rewrites can happen in an arbitrary order for a given + * key. In code paths where we need to loop with read_mems_allowed_begin() and + * read_mems_allowed_retry() to get a consistent view of mems_allowed, we need + * to ensure that begin() always gets rewritten before retry() in the + * disabled -> enabled transition. If not, then if local irqs are disabled + * around the loop, we can deadlock since retry() would always be + * comparing the latest value of the mems_allowed seqcount against 0 as + * begin() still would see cpusets_enabled() as false. The enabled -> disabled + * transition should happen in reverse order for the same reasons (want to stop + * looking at real value of mems_allowed.sequence in retry() first). + */ +extern struct static_key_false cpusets_pre_enable_key; extern struct static_key_false cpusets_enabled_key; static inline bool cpusets_enabled(void) { @@ -32,12 +45,14 @@ static inline int nr_cpusets(void) static inline void cpuset_inc(void) { + static_branch_inc(&cpusets_pre_enable_key); static_branch_inc(&cpusets_enabled_key); } static inline void cpuset_dec(void) { static_branch_dec(&cpusets_enabled_key); + static_branch_dec(&cpusets_pre_enable_key); } extern int cpuset_init(void); @@ -115,7 +130,7 @@ extern void cpuset_print_current_mems_allowed(void); */ static inline unsigned int read_mems_allowed_begin(void) { - if (!cpusets_enabled()) + if (!static_branch_unlikely(&cpusets_pre_enable_key)) return 0; return read_seqcount_begin(¤t->mems_allowed_seq); @@ -129,7 +144,7 @@ static inline unsigned int read_mems_allowed_begin(void) */ static inline bool read_mems_allowed_retry(unsigned int seq) { - if (!cpusets_enabled()) + if (!static_branch_unlikely(&cpusets_enabled_key)) return false; return read_seqcount_retry(¤t->mems_allowed_seq, seq); diff --git a/include/linux/crush/crush.h b/include/linux/crush/crush.h index 92e165d417a6..07eed95e10c7 100644 --- a/include/linux/crush/crush.h +++ b/include/linux/crush/crush.h @@ -193,7 +193,7 @@ struct crush_choose_arg { struct crush_choose_arg_map { #ifdef __KERNEL__ struct rb_node node; - u64 choose_args_index; + s64 choose_args_index; #endif struct crush_choose_arg *args; /*!< replacement for each bucket in the crushmap */ diff --git a/include/linux/dax.h b/include/linux/dax.h index 794811875732..df97b7af7e2c 100644 --- a/include/linux/dax.h +++ b/include/linux/dax.h @@ -87,6 +87,7 @@ size_t dax_copy_from_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr, void dax_flush(struct dax_device *dax_dev, pgoff_t pgoff, void *addr, size_t size); void dax_write_cache(struct dax_device *dax_dev, bool wc); +bool dax_write_cache_enabled(struct dax_device *dax_dev); /* * We use lowest available bit in exceptional entry for locking, one bit for diff --git a/include/linux/device.h b/include/linux/device.h index 723cd54b94da..beabdbc08420 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -843,7 +843,7 @@ struct dev_links_info { * hibernation, system resume and during runtime PM transitions * along with subsystem-level and driver-level callbacks. * @pins: For device pin management. - * See Documentation/pinctrl.txt for details. + * See Documentation/driver-api/pinctl.rst for details. * @msi_list: Hosts MSI descriptors * @msi_domain: The generic MSI domain this device is using. * @numa_node: NUMA node this device is close to. diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 843ab866e0f4..03c0196a6f24 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -157,16 +157,40 @@ static inline int is_device_dma_capable(struct device *dev) * These three functions are only for dma allocator. * Don't use them in device drivers. */ -int dma_alloc_from_coherent(struct device *dev, ssize_t size, +int dma_alloc_from_dev_coherent(struct device *dev, ssize_t size, dma_addr_t *dma_handle, void **ret); -int dma_release_from_coherent(struct device *dev, int order, void *vaddr); +int dma_release_from_dev_coherent(struct device *dev, int order, void *vaddr); -int dma_mmap_from_coherent(struct device *dev, struct vm_area_struct *vma, +int dma_mmap_from_dev_coherent(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, size_t size, int *ret); + +void *dma_alloc_from_global_coherent(ssize_t size, dma_addr_t *dma_handle); +int dma_release_from_global_coherent(int order, void *vaddr); +int dma_mmap_from_global_coherent(struct vm_area_struct *vma, void *cpu_addr, + size_t size, int *ret); + #else -#define dma_alloc_from_coherent(dev, size, handle, ret) (0) -#define dma_release_from_coherent(dev, order, vaddr) (0) -#define dma_mmap_from_coherent(dev, vma, vaddr, order, ret) (0) +#define dma_alloc_from_dev_coherent(dev, size, handle, ret) (0) +#define dma_release_from_dev_coherent(dev, order, vaddr) (0) +#define dma_mmap_from_dev_coherent(dev, vma, vaddr, order, ret) (0) + +static inline void *dma_alloc_from_global_coherent(ssize_t size, + dma_addr_t *dma_handle) +{ + return NULL; +} + +static inline int dma_release_from_global_coherent(int order, void *vaddr) +{ + return 0; +} + +static inline int dma_mmap_from_global_coherent(struct vm_area_struct *vma, + void *cpu_addr, size_t size, + int *ret) +{ + return 0; +} #endif /* CONFIG_HAVE_GENERIC_DMA_COHERENT */ #ifdef CONFIG_HAS_DMA @@ -481,7 +505,7 @@ static inline void *dma_alloc_attrs(struct device *dev, size_t size, BUG_ON(!ops); - if (dma_alloc_from_coherent(dev, size, dma_handle, &cpu_addr)) + if (dma_alloc_from_dev_coherent(dev, size, dma_handle, &cpu_addr)) return cpu_addr; if (!arch_dma_alloc_attrs(&dev, &flag)) @@ -503,7 +527,7 @@ static inline void dma_free_attrs(struct device *dev, size_t size, BUG_ON(!ops); WARN_ON(irqs_disabled()); - if (dma_release_from_coherent(dev, get_order(size), cpu_addr)) + if (dma_release_from_dev_coherent(dev, get_order(size), cpu_addr)) return; if (!ops->free || !cpu_addr) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 00ca5b86a753..d501d3956f13 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -689,7 +689,8 @@ i2c_unlock_adapter(struct i2c_adapter *adapter) #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */ #define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */ #define I2C_CLASS_SPD (1<<7) /* Memory modules */ -#define I2C_CLASS_DEPRECATED (1<<8) /* Warn users that adapter will stop using classes */ +/* Warn users that the adapter doesn't support classes anymore */ +#define I2C_CLASS_DEPRECATED (1<<8) /* Internal numbers to terminate lists */ #define I2C_CLIENT_END 0xfffeU diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index e1b442996f81..474d6bbc158c 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -128,6 +128,7 @@ struct inet6_skb_parm { #define IP6SKB_FRAGMENTED 16 #define IP6SKB_HOPBYHOP 32 #define IP6SKB_L3SLAVE 64 +#define IP6SKB_JUMBOGRAM 128 }; #if defined(CONFIG_NET_L3_MASTER_DEV) @@ -152,6 +153,11 @@ static inline int inet6_iif(const struct sk_buff *skb) return l3_slave ? skb->skb_iif : IP6CB(skb)->iif; } +static inline bool inet6_is_jumbogram(const struct sk_buff *skb) +{ + return !!(IP6CB(skb)->flags & IP6SKB_JUMBOGRAM); +} + /* can not be used in TCP layer after tcp_v6_fill_cb */ static inline bool inet6_exact_dif_match(struct net *net, struct sk_buff *skb) { diff --git a/include/linux/irq.h b/include/linux/irq.h index 00db35b61e9e..d2d543794093 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -388,7 +388,12 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d) * @irq_mask_ack: ack and mask an interrupt source * @irq_unmask: unmask an interrupt source * @irq_eoi: end of interrupt - * @irq_set_affinity: set the CPU affinity on SMP machines + * @irq_set_affinity: Set the CPU affinity on SMP machines. If the force + * argument is true, it tells the driver to + * unconditionally apply the affinity setting. Sanity + * checks against the supplied affinity mask are not + * required. This is used for CPU hotplug where the + * target CPU is not yet set in the cpu_online_mask. * @irq_retrigger: resend an IRQ to the CPU * @irq_set_type: set the flow type (IRQ_TYPE_LEVEL/etc.) of an IRQ * @irq_set_wake: enable/disable power-management wake-on of an IRQ diff --git a/include/linux/kthread.h b/include/linux/kthread.h index 4fec8b775895..82e197eeac91 100644 --- a/include/linux/kthread.h +++ b/include/linux/kthread.h @@ -15,7 +15,7 @@ struct task_struct *kthread_create_on_node(int (*threadfn)(void *data), * @threadfn: the function to run in the thread * @data: data pointer for @threadfn() * @namefmt: printf-style format string for the thread name - * @...: arguments for @namefmt. + * @arg...: arguments for @namefmt. * * This macro will create a kthread on the current node, leaving it in * the stopped state. This is just a helper for kthread_create_on_node(); diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 648b34cabb38..21a6fd6c44af 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -445,6 +445,7 @@ struct kvm { struct kvm_stat_data **debugfs_stat_data; struct srcu_struct srcu; struct srcu_struct irq_srcu; + pid_t userspace_pid; }; #define kvm_err(fmt, ...) \ @@ -476,7 +477,8 @@ struct kvm { static inline struct kvm_io_bus *kvm_get_bus(struct kvm *kvm, enum kvm_bus idx) { return srcu_dereference_check(kvm->buses[idx], &kvm->srcu, - lockdep_is_held(&kvm->slots_lock)); + lockdep_is_held(&kvm->slots_lock) || + !refcount_read(&kvm->users_count)); } static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i) @@ -569,7 +571,8 @@ void kvm_put_kvm(struct kvm *kvm); static inline struct kvm_memslots *__kvm_memslots(struct kvm *kvm, int as_id) { return srcu_dereference_check(kvm->memslots[as_id], &kvm->srcu, - lockdep_is_held(&kvm->slots_lock)); + lockdep_is_held(&kvm->slots_lock) || + !refcount_read(&kvm->users_count)); } static inline struct kvm_memslots *kvm_memslots(struct kvm *kvm) diff --git a/include/linux/libata.h b/include/linux/libata.h index 55de3da58b1c..931c32f1f18d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -435,7 +435,7 @@ enum { ATA_HORKAGE_NOLPM = (1 << 20), /* don't use LPM */ ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */ ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */ - ATA_HORKAGE_NO_NCQ_LOG = (1 << 23), /* don't use NCQ for log read */ + ATA_HORKAGE_NO_DMA_LOG = (1 << 23), /* don't use DMA for log read */ ATA_HORKAGE_NOTRIM = (1 << 24), /* don't use TRIM */ ATA_HORKAGE_MAX_SEC_1024 = (1 << 25), /* Limit max sects to 1024 */ diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index aad5d81dfb44..b54517c05e9a 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -620,6 +620,7 @@ struct mlx4_caps { u32 dmfs_high_rate_qpn_base; u32 dmfs_high_rate_qpn_range; u32 vf_caps; + bool wol_port[MLX4_MAX_PORTS + 1]; struct mlx4_rate_limit_caps rl_caps; }; diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 87869c04849a..3030121b4746 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -7749,8 +7749,10 @@ struct mlx5_ifc_pcam_reg_bits { }; struct mlx5_ifc_mcam_enhanced_features_bits { - u8 reserved_at_0[0x7f]; + u8 reserved_at_0[0x7d]; + u8 mtpps_enh_out_per_adj[0x1]; + u8 mtpps_fs[0x1]; u8 pcie_performance_group[0x1]; }; @@ -8159,7 +8161,8 @@ struct mlx5_ifc_mtpps_reg_bits { u8 reserved_at_78[0x4]; u8 cap_pin_4_mode[0x4]; - u8 reserved_at_80[0x80]; + u8 field_select[0x20]; + u8 reserved_at_a0[0x60]; u8 enable[0x1]; u8 reserved_at_101[0xb]; @@ -8174,8 +8177,9 @@ struct mlx5_ifc_mtpps_reg_bits { u8 out_pulse_duration[0x10]; u8 out_periodic_adjustment[0x10]; + u8 enhanced_out_periodic_adjustment[0x20]; - u8 reserved_at_1a0[0x60]; + u8 reserved_at_1c0[0x20]; }; struct mlx5_ifc_mtppse_reg_bits { diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h index 6f41270d80c0..f378dc0e7eaf 100644 --- a/include/linux/mlx5/qp.h +++ b/include/linux/mlx5/qp.h @@ -212,7 +212,6 @@ struct mlx5_wqe_ctrl_seg { #define MLX5_WQE_CTRL_OPCODE_MASK 0xff #define MLX5_WQE_CTRL_WQE_INDEX_MASK 0x00ffff00 #define MLX5_WQE_CTRL_WQE_INDEX_SHIFT 8 -#define MLX5_WQE_AV_EXT 0x80000000 enum { MLX5_ETH_WQE_L3_INNER_CSUM = 1 << 4, diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index ff151814a02d..7f384bb62d8e 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -495,6 +495,10 @@ struct mm_struct { */ bool tlb_flush_pending; #endif +#ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH + /* See flush_tlb_batched_pending() */ + bool tlb_flush_batched; +#endif struct uprobes_state uprobes_state; #ifdef CONFIG_HUGETLB_PAGE atomic_long_t hugetlb_usage; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 892148c448cc..5216d2eb2289 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -681,10 +681,10 @@ struct nand_buffers { * @tWW_min: WP# transition to WE# low */ struct nand_sdr_timings { - u32 tBERS_max; + u64 tBERS_max; u32 tCCS_min; - u32 tPROG_max; - u32 tR_max; + u64 tPROG_max; + u64 tR_max; u32 tALH_min; u32 tADL_min; u32 tALS_min; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index ca3bcc4ed4e5..62cbcb842f99 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1235,7 +1235,7 @@ struct nfs41_state_protection { struct nfs41_exchange_id_args { struct nfs_client *client; - nfs4_verifier *verifier; + nfs4_verifier verifier; u32 flags; struct nfs41_state_protection state_protect; }; diff --git a/include/linux/nvme-fc.h b/include/linux/nvme-fc.h index 21c37e39e41a..36cca93a5ff2 100644 --- a/include/linux/nvme-fc.h +++ b/include/linux/nvme-fc.h @@ -334,5 +334,24 @@ struct fcnvme_ls_disconnect_acc { #define NVME_FC_LS_TIMEOUT_SEC 2 /* 2 seconds */ #define NVME_FC_TGTOP_TIMEOUT_SEC 2 /* 2 seconds */ +/* + * TRADDR string must be of form "nn-<16hexdigits>:pn-<16hexdigits>" + * the string is allowed to be specified with or without a "0x" prefix + * infront of the <16hexdigits>. Without is considered the "min" string + * and with is considered the "max" string. The hexdigits may be upper + * or lower case. + */ +#define NVME_FC_TRADDR_NNLEN 3 /* "?n-" */ +#define NVME_FC_TRADDR_OXNNLEN 5 /* "?n-0x" */ +#define NVME_FC_TRADDR_HEXNAMELEN 16 +#define NVME_FC_TRADDR_MINLENGTH \ + (2 * (NVME_FC_TRADDR_NNLEN + NVME_FC_TRADDR_HEXNAMELEN) + 1) +#define NVME_FC_TRADDR_MAXLENGTH \ + (2 * (NVME_FC_TRADDR_OXNNLEN + NVME_FC_TRADDR_HEXNAMELEN) + 1) +#define NVME_FC_TRADDR_MIN_PN_OFFSET \ + (NVME_FC_TRADDR_NNLEN + NVME_FC_TRADDR_HEXNAMELEN + 1) +#define NVME_FC_TRADDR_MAX_PN_OFFSET \ + (NVME_FC_TRADDR_OXNNLEN + NVME_FC_TRADDR_HEXNAMELEN + 1) + #endif /* _NVME_FC_H */ diff --git a/include/linux/nvme.h b/include/linux/nvme.h index bc74da018bdc..25d8225dbd04 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -1006,7 +1006,7 @@ static inline bool nvme_is_write(struct nvme_command *cmd) * Why can't we simply have a Fabrics In and Fabrics out command? */ if (unlikely(cmd->common.opcode == nvme_fabrics_command)) - return cmd->fabrics.opcode & 1; + return cmd->fabrics.fctype & 1; return cmd->common.opcode & 1; } diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index baa9344dcd10..79b36f57c3ba 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -163,8 +163,6 @@ void release_pages(struct page **pages, int nr, bool cold); */ static inline int page_cache_get_speculative(struct page *page) { - VM_BUG_ON(in_interrupt()); - #ifdef CONFIG_TINY_RCU # ifdef CONFIG_PREEMPT_COUNT VM_BUG_ON(!in_atomic() && !irqs_disabled()); diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h index 1360dd6d5e61..af0f44effd44 100644 --- a/include/linux/perf/arm_pmu.h +++ b/include/linux/perf/arm_pmu.h @@ -24,10 +24,14 @@ * interrupt and passed the address of the low level handler, * and can be used to implement any platform specific handling * before or after calling it. + * + * @irq_flags: if non-zero, these flags will be passed to request_irq + * when requesting interrupts for this PMU device. */ struct arm_pmu_platdata { irqreturn_t (*handle_irq)(int irq, void *dev, irq_handler_t pmu_handler); + unsigned long irq_flags; }; #ifdef CONFIG_ARM_PMU diff --git a/include/linux/phy.h b/include/linux/phy.h index 2a9567bb8186..0bb5b212ab42 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -830,7 +830,7 @@ static inline int phy_read_status(struct phy_device *phydev) dev_err(&_phydev->mdio.dev, format, ##args) #define phydev_dbg(_phydev, format, args...) \ - dev_dbg(&_phydev->mdio.dev, format, ##args); + dev_dbg(&_phydev->mdio.dev, format, ##args) static inline const char *phydev_name(const struct phy_device *phydev) { diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 231d3075815a..e91d1b6a260d 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -81,8 +81,8 @@ * it. * @PIN_CONFIG_OUTPUT: this will configure the pin as an output and drive a * value on the line. Use argument 1 to indicate high level, argument 0 to - * indicate low level. (Please see Documentation/pinctrl.txt, section - * "GPIO mode pitfalls" for a discussion around this parameter.) + * indicate low level. (Please see Documentation/driver-api/pinctl.rst, + * section "GPIO mode pitfalls" for a discussion around this parameter.) * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells * the driver which alternative power source to use. diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h index 8e981be2e2c2..0ff1e0dba720 100644 --- a/include/linux/platform_data/hsmmc-omap.h +++ b/include/linux/platform_data/hsmmc-omap.h @@ -55,9 +55,6 @@ struct omap_hsmmc_platform_data { u32 caps; /* Used for the MMC driver on 2430 and later */ u32 pm_caps; /* PM capabilities of the mmc */ - /* use the internal clock */ - unsigned internal_clock:1; - /* nonremovable e.g. eMMC */ unsigned nonremovable:1; @@ -73,13 +70,6 @@ struct omap_hsmmc_platform_data { int gpio_cd; /* gpio (card detect) */ int gpio_cod; /* gpio (cover detect) */ int gpio_wp; /* gpio (write protect) */ - - int (*set_power)(struct device *dev, int power_on, int vdd); - void (*remux)(struct device *dev, int power_on); - /* Call back before enabling / disabling regulators */ - void (*before_set_reg)(struct device *dev, int power_on, int vdd); - /* Call back after enabling / disabling regulators */ - void (*after_set_reg)(struct device *dev, int power_on, int vdd); /* if we have special card, init it using this callback */ void (*init_card)(struct mmc_card *card); diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h index a026bfd089db..51349d124ee5 100644 --- a/include/linux/ptp_clock_kernel.h +++ b/include/linux/ptp_clock_kernel.h @@ -99,6 +99,11 @@ struct system_device_crosststamp; * parameter func: the desired function to use. * parameter chan: the function channel index to use. * + * @do_work: Request driver to perform auxiliary (periodic) operations + * Driver should return delay of the next auxiliary work scheduling + * time (>=0) or negative value in case further scheduling + * is not required. + * * Drivers should embed their ptp_clock_info within a private * structure, obtaining a reference to it using container_of(). * @@ -126,6 +131,7 @@ struct ptp_clock_info { struct ptp_clock_request *request, int on); int (*verify)(struct ptp_clock_info *ptp, unsigned int pin, enum ptp_pin_function func, unsigned int chan); + long (*do_aux_work)(struct ptp_clock_info *ptp); }; struct ptp_clock; @@ -211,6 +217,16 @@ extern int ptp_clock_index(struct ptp_clock *ptp); int ptp_find_pin(struct ptp_clock *ptp, enum ptp_pin_function func, unsigned int chan); +/** + * ptp_schedule_worker() - schedule ptp auxiliary work + * + * @ptp: The clock obtained from ptp_clock_register(). + * @delay: number of jiffies to wait before queuing + * See kthread_queue_delayed_work() for more info. + */ + +int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay); + #else static inline struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, struct device *parent) @@ -225,6 +241,10 @@ static inline int ptp_clock_index(struct ptp_clock *ptp) static inline int ptp_find_pin(struct ptp_clock *ptp, enum ptp_pin_function func, unsigned int chan) { return -1; } +static inline int ptp_schedule_worker(struct ptp_clock *ptp, + unsigned long delay) +{ return -EOPNOTSUPP; } + #endif #endif diff --git a/include/linux/uuid.h b/include/linux/uuid.h index 2251e1925ea4..33b0bdbb613c 100644 --- a/include/linux/uuid.h +++ b/include/linux/uuid.h @@ -84,26 +84,12 @@ int guid_parse(const char *uuid, guid_t *u); int uuid_parse(const char *uuid, uuid_t *u); /* backwards compatibility, don't use in new code */ -typedef uuid_t uuid_be; -#define UUID_BE(a, _b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ - UUID_INIT(a, _b, c, d0, d1, d2, d3, d4, d5, d6, d7) -#define NULL_UUID_BE \ - UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00) - #define uuid_le_gen(u) guid_gen(u) -#define uuid_be_gen(u) uuid_gen(u) #define uuid_le_to_bin(guid, u) guid_parse(guid, u) -#define uuid_be_to_bin(uuid, u) uuid_parse(uuid, u) static inline int uuid_le_cmp(const guid_t u1, const guid_t u2) { return memcmp(&u1, &u2, sizeof(guid_t)); } -static inline int uuid_be_cmp(const uuid_t u1, const uuid_t u2) -{ - return memcmp(&u1, &u2, sizeof(uuid_t)); -} - #endif diff --git a/include/linux/vfio.h b/include/linux/vfio.h index 586809abb273..a47b985341d1 100644 --- a/include/linux/vfio.h +++ b/include/linux/vfio.h @@ -152,7 +152,7 @@ extern int vfio_set_irqs_validate_and_prepare(struct vfio_irq_set *hdr, size_t *data_size); struct pci_dev; -#ifdef CONFIG_EEH +#if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH) extern void vfio_spapr_pci_eeh_open(struct pci_dev *pdev); extern void vfio_spapr_pci_eeh_release(struct pci_dev *pdev); extern long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group, @@ -173,7 +173,7 @@ static inline long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group, { return -ENOTTY; } -#endif /* CONFIG_EEH */ +#endif /* CONFIG_VFIO_SPAPR_EEH */ /* * IRQfd - generic diff --git a/include/linux/wait.h b/include/linux/wait.h index b289c96151ee..5b74e36c0ca8 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -529,13 +529,13 @@ do { \ /** * wait_event_interruptible_hrtimeout - sleep until a condition gets true or a timeout elapses - * @wq_head: the waitqueue to wait on + * @wq: the waitqueue to wait on * @condition: a C expression for the event to wait for * @timeout: timeout, as a ktime_t * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. - * The @condition is checked each time the waitqueue @wq_head is woken up. + * The @condition is checked each time the waitqueue @wq is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. @@ -735,12 +735,12 @@ extern int do_wait_intr_irq(wait_queue_head_t *, wait_queue_entry_t *); /** * wait_event_killable - sleep until a condition gets true - * @wq: the waitqueue to wait on + * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_KILLABLE) until the * @condition evaluates to true or a signal is received. - * The @condition is checked each time the waitqueue @wq is woken up. + * The @condition is checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index c102ef65cb64..db6dc9dc0482 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -323,6 +323,7 @@ enum { __WQ_DRAINING = 1 << 16, /* internal: workqueue is draining */ __WQ_ORDERED = 1 << 17, /* internal: workqueue is ordered */ + __WQ_ORDERED_EXPLICIT = 1 << 18, /* internal: alloc_ordered_workqueue() */ __WQ_LEGACY = 1 << 18, /* internal: create*_workqueue() */ WQ_MAX_ACTIVE = 512, /* I like 512, better ideas? */ @@ -422,7 +423,8 @@ __alloc_workqueue_key(const char *fmt, unsigned int flags, int max_active, * Pointer to the allocated workqueue on success, %NULL on failure. */ #define alloc_ordered_workqueue(fmt, flags, args...) \ - alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | (flags), 1, ##args) + alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | \ + __WQ_ORDERED_EXPLICIT | (flags), 1, ##args) #define create_workqueue(name) \ alloc_workqueue("%s", __WQ_LEGACY | WQ_MEM_RECLAIM, 1, (name)) |