diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/iio/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/iio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/iio/orientation/Kconfig | 19 | ||||
| -rw-r--r-- | drivers/iio/orientation/Makefile | 6 | ||||
| -rw-r--r-- | drivers/iio/orientation/hid-sensor-incl-3d.c | 428 |
5 files changed, 455 insertions, 0 deletions
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index a5ed88226276..5dd0e120a504 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -69,6 +69,7 @@ source "drivers/iio/humidity/Kconfig" source "drivers/iio/imu/Kconfig" source "drivers/iio/light/Kconfig" source "drivers/iio/magnetometer/Kconfig" +source "drivers/iio/orientation/Kconfig" if IIO_TRIGGER source "drivers/iio/trigger/Kconfig" endif #IIO_TRIGGER diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index b3b50968b46b..887d39090d75 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -22,6 +22,7 @@ obj-y += humidity/ obj-y += imu/ obj-y += light/ obj-y += magnetometer/ +obj-y += orientation/ obj-y += pressure/ obj-y += temperature/ obj-y += trigger/ diff --git a/drivers/iio/orientation/Kconfig b/drivers/iio/orientation/Kconfig new file mode 100644 index 000000000000..58c62c837e12 --- /dev/null +++ b/drivers/iio/orientation/Kconfig @@ -0,0 +1,19 @@ +# +# Inclinometer sensors +# +# When adding new entries keep the list in alphabetical order + +menu "Inclinometer sensors" + +config HID_SENSOR_INCLINOMETER_3D + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID Inclinometer 3D" + help + Say yes here to build support for the HID SENSOR + Inclinometer 3D. + +endmenu diff --git a/drivers/iio/orientation/Makefile b/drivers/iio/orientation/Makefile new file mode 100644 index 000000000000..2c97572ee919 --- /dev/null +++ b/drivers/iio/orientation/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for industrial I/O Inclinometer sensor drivers +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_HID_SENSOR_INCLINOMETER_3D) += hid-sensor-incl-3d.o diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c new file mode 100644 index 000000000000..070feab08faa --- /dev/null +++ b/drivers/iio/orientation/hid-sensor-incl-3d.c @@ -0,0 +1,428 @@ +/* + * HID Sensors Driver + * Copyright (c) 2013, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc. + * + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/hid-sensor-hub.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include "../common/hid-sensors/hid-sensor-trigger.h" + +enum incl_3d_channel { + CHANNEL_SCAN_INDEX_X, + CHANNEL_SCAN_INDEX_Y, + CHANNEL_SCAN_INDEX_Z, + INCLI_3D_CHANNEL_MAX, +}; + +struct incl_3d_state { + struct hid_sensor_hub_callbacks callbacks; + struct hid_sensor_common common_attributes; + struct hid_sensor_hub_attribute_info incl[INCLI_3D_CHANNEL_MAX]; + u32 incl_val[INCLI_3D_CHANNEL_MAX]; +}; + +static const u32 incl_3d_addresses[INCLI_3D_CHANNEL_MAX] = { + HID_USAGE_SENSOR_ORIENT_TILT_X, + HID_USAGE_SENSOR_ORIENT_TILT_Y, + HID_USAGE_SENSOR_ORIENT_TILT_Z +}; + +/* Channel definitions */ +static const struct iio_chan_spec incl_3d_channels[] = { + { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_X, + }, { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_Y, + }, { + .type = IIO_INCLI, + .modified = 1, + .channel2 = IIO_MOD_Z, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_Z, + } +}; + +/* Adjust channel real bits based on report descriptor */ +static void incl_3d_adjust_channel_bit_mask(struct iio_chan_spec *chan, + int size) +{ + chan->scan_type.sign = 's'; + /* Real storage bits will change based on the report desc. */ + chan->scan_type.realbits = size * 8; + /* Maximum size of a sample to capture is u32 */ + chan->scan_type.storagebits = sizeof(u32) * 8; +} + +/* Channel read_raw handler */ +static int incl_3d_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct incl_3d_state *incl_state = iio_priv(indio_dev); + int report_id = -1; + u32 address; + int ret_type; + + *val = 0; + *val2 = 0; + switch (mask) { + case IIO_CHAN_INFO_RAW: + report_id = + incl_state->incl[chan->scan_index].report_id; + address = incl_3d_addresses[chan->scan_index]; + if (report_id >= 0) + *val = sensor_hub_input_attr_get_raw_value( + incl_state->common_attributes.hsdev, + HID_USAGE_SENSOR_INCLINOMETER_3D, address, + report_id); + else { + return -EINVAL; + } + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = incl_state->incl[CHANNEL_SCAN_INDEX_X].units; + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_OFFSET: + *val = hid_sensor_convert_exponent( + incl_state->incl[CHANNEL_SCAN_INDEX_X].unit_expo); + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret_type = hid_sensor_read_samp_freq_value( + &incl_state->common_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret_type = hid_sensor_read_raw_hyst_value( + &incl_state->common_attributes, val, val2); + break; + default: + ret_type = -EINVAL; + break; + } + + return ret_type; +} + +/* Channel write_raw handler */ +static int incl_3d_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct incl_3d_state *incl_state = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = hid_sensor_write_samp_freq_value( + &incl_state->common_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret = hid_sensor_write_raw_hyst_value( + &incl_state->common_attributes, val, val2); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static const struct iio_info incl_3d_info = { + .driver_module = THIS_MODULE, + .read_raw = &incl_3d_read_raw, + .write_raw = &incl_3d_write_raw, +}; + +/* Function to push data to buffer */ +static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len) +{ + dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); + iio_push_to_buffers(indio_dev, (u8 *)data); +} + +/* Callback handler to send event after all samples are received and captured */ +static int incl_3d_proc_event(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct incl_3d_state *incl_state = iio_priv(indio_dev); + + dev_dbg(&indio_dev->dev, "incl_3d_proc_event [%d]\n", + incl_state->common_attributes.data_ready); + if (incl_state->common_attributes.data_ready) + hid_sensor_push_data(indio_dev, + (u8 *)incl_state->incl_val, + sizeof(incl_state->incl_val)); + + return 0; +} + +/* Capture samples in local storage */ +static int incl_3d_capture_sample(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + size_t raw_len, char *raw_data, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct incl_3d_state *incl_state = iio_priv(indio_dev); + int ret = 0; + + switch (usage_id) { + case HID_USAGE_SENSOR_ORIENT_TILT_X: + incl_state->incl_val[CHANNEL_SCAN_INDEX_X] = *(u32 *)raw_data; + break; + case HID_USAGE_SENSOR_ORIENT_TILT_Y: + incl_state->incl_val[CHANNEL_SCAN_INDEX_Y] = *(u32 *)raw_data; + break; + case HID_USAGE_SENSOR_ORIENT_TILT_Z: + incl_state->incl_val[CHANNEL_SCAN_INDEX_Z] = *(u32 *)raw_data; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +/* Parse report which is specific to an usage id*/ +static int incl_3d_parse_report(struct platform_device *pdev, + struct hid_sensor_hub_device *hsdev, + struct iio_chan_spec *channels, + unsigned usage_id, + struct incl_3d_state *st) +{ + int ret; + + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_ORIENT_TILT_X, + &st->incl[CHANNEL_SCAN_INDEX_X]); + if (ret) + return ret; + incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_X], + st->incl[CHANNEL_SCAN_INDEX_X].size); + + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_ORIENT_TILT_Y, + &st->incl[CHANNEL_SCAN_INDEX_Y]); + if (ret) + return ret; + incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Y], + st->incl[CHANNEL_SCAN_INDEX_Y].size); + + ret = sensor_hub_input_get_attribute_info(hsdev, + HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_ORIENT_TILT_Z, + &st->incl[CHANNEL_SCAN_INDEX_Z]); + if (ret) + return ret; + incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Z], + st->incl[CHANNEL_SCAN_INDEX_Z].size); + + dev_dbg(&pdev->dev, "incl_3d %x:%x, %x:%x, %x:%x\n", + st->incl[0].index, + st->incl[0].report_id, + st->incl[1].index, st->incl[1].report_id, + st->incl[2].index, st->incl[2].report_id); + + /* Set Sensitivity field ids, when there is no individual modifier */ + if (st->common_attributes.sensitivity.index < 0) { + sensor_hub_input_get_attribute_info(hsdev, + HID_FEATURE_REPORT, usage_id, + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | + HID_USAGE_SENSOR_DATA_ORIENTATION, + &st->common_attributes.sensitivity); + dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", + st->common_attributes.sensitivity.index, + st->common_attributes.sensitivity.report_id); + } + return ret; +} + +/* Function to initialize the processing for usage id */ +static int hid_incl_3d_probe(struct platform_device *pdev) +{ + int ret; + static char *name = "incli_3d"; + struct iio_dev *indio_dev; + struct incl_3d_state *incl_state; + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_chan_spec *channels; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct incl_3d_state)); + if (indio_dev == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, indio_dev); + + incl_state = iio_priv(indio_dev); + incl_state->common_attributes.hsdev = hsdev; + incl_state->common_attributes.pdev = pdev; + + ret = hid_sensor_parse_common_attributes(hsdev, + HID_USAGE_SENSOR_INCLINOMETER_3D, + &incl_state->common_attributes); + if (ret) { + dev_err(&pdev->dev, "failed to setup common attributes\n"); + return ret; + } + + channels = kmemdup(incl_3d_channels, sizeof(incl_3d_channels), + GFP_KERNEL); + if (!channels) { + dev_err(&pdev->dev, "failed to duplicate channels\n"); + return -ENOMEM; + } + + ret = incl_3d_parse_report(pdev, hsdev, channels, + HID_USAGE_SENSOR_INCLINOMETER_3D, incl_state); + if (ret) { + dev_err(&pdev->dev, "failed to setup attributes\n"); + goto error_free_dev_mem; + } + + indio_dev->channels = channels; + indio_dev->num_channels = ARRAY_SIZE(incl_3d_channels); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &incl_3d_info; + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + NULL, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); + goto error_free_dev_mem; + } + incl_state->common_attributes.data_ready = false; + ret = hid_sensor_setup_trigger(indio_dev, name, + &incl_state->common_attributes); + if (ret) { + dev_err(&pdev->dev, "trigger setup failed\n"); + goto error_unreg_buffer_funcs; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "device register failed\n"); + goto error_remove_trigger; + } + + incl_state->callbacks.send_event = incl_3d_proc_event; + incl_state->callbacks.capture_sample = incl_3d_capture_sample; + incl_state->callbacks.pdev = pdev; + ret = sensor_hub_register_callback(hsdev, + HID_USAGE_SENSOR_INCLINOMETER_3D, + &incl_state->callbacks); + if (ret) { + dev_err(&pdev->dev, "callback reg failed\n"); + goto error_iio_unreg; + } + + return 0; + +error_iio_unreg: + iio_device_unregister(indio_dev); +error_remove_trigger: + hid_sensor_remove_trigger(&incl_state->common_attributes); +error_unreg_buffer_funcs: + iio_triggered_buffer_cleanup(indio_dev); +error_free_dev_mem: + kfree(indio_dev->channels); + return ret; +} + +/* Function to deinitialize the processing for usage id */ +static int hid_incl_3d_remove(struct platform_device *pdev) +{ + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct incl_3d_state *incl_state = iio_priv(indio_dev); + + sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D); + iio_device_unregister(indio_dev); + hid_sensor_remove_trigger(&incl_state->common_attributes); + iio_triggered_buffer_cleanup(indio_dev); + kfree(indio_dev->channels); + + return 0; +} + +static struct platform_device_id hid_incl_3d_ids[] = { + { + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-200086", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, hid_incl_3d_ids); + +static struct platform_driver hid_incl_3d_platform_driver = { + .id_table = hid_incl_3d_ids, + .driver = { + .name = KBUILD_MODNAME, + .owner = THIS_MODULE, + }, + .probe = hid_incl_3d_probe, + .remove = hid_incl_3d_remove, +}; +module_platform_driver(hid_incl_3d_platform_driver); + +MODULE_DESCRIPTION("HID Sensor Inclinometer 3D"); +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL"); |