24 files changed, 1059 insertions, 78 deletions

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index e371a9c15341..a07015d646dd 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -398,8 +398,7 @@ static int sbs_init(struct pci_dev *dev)
 {
 	u8 __iomem *p;
 
-	p = ioremap_nocache(pci_resource_start(dev, 0),
-						pci_resource_len(dev, 0));
+	p = pci_ioremap_bar(dev, 0);
 
 	if (p == NULL)
 		return -ENOMEM;
@@ -423,8 +422,7 @@ static void __devexit sbs_exit(struct pci_dev *dev)
 {
 	u8 __iomem *p;
 
-	p = ioremap_nocache(pci_resource_start(dev, 0),
-					pci_resource_len(dev, 0));
+	p = pci_ioremap_bar(dev, 0);
 	/* FIXME: What if resource_len < OCT_REG_CR_OFF */
 	if (p != NULL)
 		writeb(0, p + OCT_REG_CR_OFF);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1132c5cae7ab..037c1e0b7c4c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1320,6 +1320,16 @@ config SERIAL_SGI_IOC3
 	  If you have an SGI Altix with an IOC3 serial card,
 	  say Y or M.  Otherwise, say N.
 
+config SERIAL_MSM
+	bool "MSM on-chip serial port support"
+	depends on ARM && ARCH_MSM
+	select SERIAL_CORE
+
+config SERIAL_MSM_CONSOLE
+	bool "MSM serial console support"
+	depends on SERIAL_MSM=y
+	select SERIAL_CORE_CONSOLE
+
 config SERIAL_NETX
 	tristate "NetX serial port support"
 	depends on ARM && ARCH_NETX
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 45a8658f54d5..d5a29981c6c4 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
 obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
+obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index e2f6b1bfac98..b4a7650af696 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -38,6 +38,10 @@
 #include <asm/cacheflush.h>
 #endif
 
+#ifdef CONFIG_SERIAL_BFIN_MODULE
+# undef CONFIG_EARLY_PRINTK
+#endif
+
 /* UART name and device definitions */
 #define BFIN_SERIAL_NAME	"ttyBF"
 #define BFIN_SERIAL_MAJOR	204
@@ -1110,6 +1114,7 @@ static void __init bfin_serial_init_ports(void)
 	bfin_serial_hw_init();
 
 	for (i = 0; i < nr_active_ports; i++) {
+		spin_lock_init(&bfin_serial_ports[i].port.lock);
 		bfin_serial_ports[i].port.uartclk   = get_sclk();
 		bfin_serial_ports[i].port.fifosize  = BFIN_UART_TX_FIFO_SIZE;
 		bfin_serial_ports[i].port.ops       = &bfin_serial_pops;
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 9f2891c2c4a2..cd1b6a45bb82 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1548,8 +1548,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
 		goto probe_exit1;
 	}
 
-	 icom_adapter->base_addr = ioremap(icom_adapter->base_addr_pci,
-						pci_resource_len(dev, 0));
+	 icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
 
 	if (!icom_adapter->base_addr)
 		goto probe_exit1;
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 107ce2e187b8..00f4577d2f7f 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -467,7 +467,7 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)
 			printk(KERN_INFO "jsm: linemap is full, added device failed\n");
 			continue;
 		} else
-			set_bit((int)line, linemap);
+			set_bit(line, linemap);
 		brd->channels[i]->uart_port.line = line;
 		if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
 			printk(KERN_INFO "jsm: add device failed\n");
@@ -503,7 +503,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
 
 		ch = brd->channels[i];
 
-		clear_bit((int)(ch->uart_port.line), linemap);
+		clear_bit(ch->uart_port.line, linemap);
 		uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
 	}
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index b3feb6198d57..abbd146c50d9 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -76,7 +76,6 @@
 #include <linux/of_platform.h>
 
 #include <asm/mpc52xx.h>
-#include <asm/mpc512x.h>
 #include <asm/mpc52xx_psc.h>
 
 #if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -254,7 +253,7 @@ static unsigned long mpc52xx_getuartclk(void *p)
 	 * but the generic serial code assumes 16
 	 * so return ipb freq / 2
 	 */
-	return mpc52xx_find_ipb_freq(p) / 2;
+	return mpc5xxx_get_bus_frequency(p) / 2;
 }
 
 static struct psc_ops mpc52xx_psc_ops = {
@@ -391,7 +390,7 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
 
 static unsigned long mpc512x_getuartclk(void *p)
 {
-	return mpc512x_find_ips_freq(p);
+	return mpc5xxx_get_bus_frequency(p);
 }
 
 static struct psc_ops mpc512x_psc_ops = {
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
new file mode 100644
index 000000000000..698048f64f5e
--- /dev/null
+++ b/drivers/serial/msm_serial.c
@@ -0,0 +1,772 @@
+/*
+ * drivers/serial/msm_serial.c - driver for msm7k serial device and console
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+# define SUPPORT_SYSRQ
+#endif
+
+#include <linux/hrtimer.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_serial.h"
+
+struct msm_port {
+	struct uart_port	uart;
+	char			name[16];
+	struct clk		*clk;
+	unsigned int		imr;
+};
+
+#define UART_TO_MSM(uart_port)	((struct msm_port *) uart_port)
+
+static inline void msm_write(struct uart_port *port, unsigned int val,
+			     unsigned int off)
+{
+	__raw_writel(val, port->membase + off);
+}
+
+static inline unsigned int msm_read(struct uart_port *port, unsigned int off)
+{
+	return __raw_readl(port->membase + off);
+}
+
+static void msm_stop_tx(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr &= ~UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_start_tx(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr |= UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_stop_rx(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_enable_ms(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr |= UART_IMR_DELTA_CTS;
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void handle_rx(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->port.tty;
+	unsigned int sr;
+
+	/*
+	 * Handle overrun. My understanding of the hardware is that overrun
+	 * is not tied to the RX buffer, so we handle the case out of band.
+	 */
+	if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+		port->icount.overrun++;
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+	}
+
+	/* and now the main RX loop */
+	while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
+		unsigned int c;
+		char flag = TTY_NORMAL;
+
+		c = msm_read(port, UART_RF);
+
+		if (sr & UART_SR_RX_BREAK) {
+			port->icount.brk++;
+			if (uart_handle_break(port))
+				continue;
+		} else if (sr & UART_SR_PAR_FRAME_ERR) {
+			port->icount.frame++;
+		} else {
+			port->icount.rx++;
+		}
+
+		/* Mask conditions we're ignorning. */
+		sr &= port->read_status_mask;
+
+		if (sr & UART_SR_RX_BREAK) {
+			flag = TTY_BREAK;
+		} else if (sr & UART_SR_PAR_FRAME_ERR) {
+			flag = TTY_FRAME;
+		}
+
+		if (!uart_handle_sysrq_char(port, c))
+			tty_insert_flip_char(tty, c, flag);
+	}
+
+	tty_flip_buffer_push(tty);
+}
+
+static void handle_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	int sent_tx;
+
+	if (port->x_char) {
+		msm_write(port, port->x_char, UART_TF);
+		port->icount.tx++;
+		port->x_char = 0;
+	}
+
+	while (msm_read(port, UART_SR) & UART_SR_TX_READY) {
+		if (uart_circ_empty(xmit)) {
+			/* disable tx interrupts */
+			msm_port->imr &= ~UART_IMR_TXLEV;
+			msm_write(port, msm_port->imr, UART_IMR);
+			break;
+		}
+
+		msm_write(port, xmit->buf[xmit->tail], UART_TF);
+
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		sent_tx = 1;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static void handle_delta_cts(struct uart_port *port)
+{
+	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+	port->icount.cts++;
+	wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static irqreturn_t msm_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	unsigned int misr;
+
+	spin_lock(&port->lock);
+	misr = msm_read(port, UART_MISR);
+	msm_write(port, 0, UART_IMR); /* disable interrupt */
+
+	if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE))
+		handle_rx(port);
+	if (misr & UART_IMR_TXLEV)
+		handle_tx(port);
+	if (misr & UART_IMR_DELTA_CTS)
+		handle_delta_cts(port);
+
+	msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int msm_tx_empty(struct uart_port *port)
+{
+	return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int msm_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
+}
+
+static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	unsigned int mr;
+
+	mr = msm_read(port, UART_MR1);
+
+	if (!(mctrl & TIOCM_RTS)) {
+		mr &= ~UART_MR1_RX_RDY_CTL;
+		msm_write(port, mr, UART_MR1);
+		msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+	} else {
+		mr |= UART_MR1_RX_RDY_CTL;
+		msm_write(port, mr, UART_MR1);
+	}
+}
+
+static void msm_break_ctl(struct uart_port *port, int break_ctl)
+{
+	if (break_ctl)
+		msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
+	else
+		msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
+}
+
+static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
+{
+	unsigned int baud_code, rxstale, watermark;
+
+	switch (baud) {
+	case 300:
+		baud_code = UART_CSR_300;
+		rxstale = 1;
+		break;
+	case 600:
+		baud_code = UART_CSR_600;
+		rxstale = 1;
+		break;
+	case 1200:
+		baud_code = UART_CSR_1200;
+		rxstale = 1;
+		break;
+	case 2400:
+		baud_code = UART_CSR_2400;
+		rxstale = 1;
+		break;
+	case 4800:
+		baud_code = UART_CSR_4800;
+		rxstale = 1;
+		break;
+	case 9600:
+		baud_code = UART_CSR_9600;
+		rxstale = 2;
+		break;
+	case 14400:
+		baud_code = UART_CSR_14400;
+		rxstale = 3;
+		break;
+	case 19200:
+		baud_code = UART_CSR_19200;
+		rxstale = 4;
+		break;
+	case 28800:
+		baud_code = UART_CSR_28800;
+		rxstale = 6;
+		break;
+	case 38400:
+		baud_code = UART_CSR_38400;
+		rxstale = 8;
+		break;
+	case 57600:
+		baud_code = UART_CSR_57600;
+		rxstale = 16;
+		break;
+	case 115200:
+	default:
+		baud_code = UART_CSR_115200;
+		baud = 115200;
+		rxstale = 31;
+		break;
+	}
+
+	msm_write(port, baud_code, UART_CSR);
+
+	/* RX stale watermark */
+	watermark = UART_IPR_STALE_LSB & rxstale;
+	watermark |= UART_IPR_RXSTALE_LAST;
+	watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
+	msm_write(port, watermark, UART_IPR);
+
+	/* set RX watermark */
+	watermark = (port->fifosize * 3) / 4;
+	msm_write(port, watermark, UART_RFWR);
+
+	/* set TX watermark */
+	msm_write(port, 10, UART_TFWR);
+
+	return baud;
+}
+
+static void msm_reset(struct uart_port *port)
+{
+	/* reset everything */
+	msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+	msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+}
+
+static void msm_init_clock(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	clk_enable(msm_port->clk);
+
+	msm_write(port, 0xC0, UART_MREG);
+	msm_write(port, 0xB2, UART_NREG);
+	msm_write(port, 0x7D, UART_DREG);
+	msm_write(port, 0x1C, UART_MNDREG);
+}
+
+static int msm_startup(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	unsigned int data, rfr_level;
+	int ret;
+
+	snprintf(msm_port->name, sizeof(msm_port->name),
+		 "msm_serial%d", port->line);
+
+	ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH,
+			  msm_port->name, port);
+	if (unlikely(ret))
+		return ret;
+
+	msm_init_clock(port);
+
+	if (likely(port->fifosize > 12))
+		rfr_level = port->fifosize - 12;
+	else
+		rfr_level = port->fifosize;
+
+	/* set automatic RFR level */
+	data = msm_read(port, UART_MR1);
+	data &= ~UART_MR1_AUTO_RFR_LEVEL1;
+	data &= ~UART_MR1_AUTO_RFR_LEVEL0;
+	data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
+	data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
+	msm_write(port, data, UART_MR1);
+
+	/* make sure that RXSTALE count is non-zero */
+	data = msm_read(port, UART_IPR);
+	if (unlikely(!data)) {
+		data |= UART_IPR_RXSTALE_LAST;
+		data |= UART_IPR_STALE_LSB;
+		msm_write(port, data, UART_IPR);
+	}
+
+	msm_reset(port);
+
+	msm_write(port, 0x05, UART_CR);	/* enable TX & RX */
+
+	/* turn on RX and CTS interrupts */
+	msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
+			UART_IMR_CURRENT_CTS;
+	msm_write(port, msm_port->imr, UART_IMR);
+
+	return 0;
+}
+
+static void msm_shutdown(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr = 0;
+	msm_write(port, 0, UART_IMR); /* disable interrupts */
+
+	clk_disable(msm_port->clk);
+
+	free_irq(port->irq, port);
+}
+
+static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
+			    struct ktermios *old)
+{
+	unsigned long flags;
+	unsigned int baud, mr;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* calculate and set baud rate */
+	baud = uart_get_baud_rate(port, termios, old, 300, 115200);
+	baud = msm_set_baud_rate(port, baud);
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+	
+	/* calculate parity */
+	mr = msm_read(port, UART_MR2);
+	mr &= ~UART_MR2_PARITY_MODE;
+	if (termios->c_cflag & PARENB) {
+		if (termios->c_cflag & PARODD)
+			mr |= UART_MR2_PARITY_MODE_ODD;
+		else if (termios->c_cflag & CMSPAR)
+			mr |= UART_MR2_PARITY_MODE_SPACE;
+		else
+			mr |= UART_MR2_PARITY_MODE_EVEN;
+	}
+
+	/* calculate bits per char */
+	mr &= ~UART_MR2_BITS_PER_CHAR;
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		mr |= UART_MR2_BITS_PER_CHAR_5;
+		break;
+	case CS6:
+		mr |= UART_MR2_BITS_PER_CHAR_6;
+		break;
+	case CS7:
+		mr |= UART_MR2_BITS_PER_CHAR_7;
+		break;
+	case CS8:
+	default:
+		mr |= UART_MR2_BITS_PER_CHAR_8;
+		break;
+	}
+
+	/* calculate stop bits */
+	mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
+	if (termios->c_cflag & CSTOPB)
+		mr |= UART_MR2_STOP_BIT_LEN_TWO;
+	else
+		mr |= UART_MR2_STOP_BIT_LEN_ONE;
+
+	/* set parity, bits per char, and stop bit */
+	msm_write(port, mr, UART_MR2);
+
+	/* calculate and set hardware flow control */
+	mr = msm_read(port, UART_MR1);
+	mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
+	if (termios->c_cflag & CRTSCTS) {
+		mr |= UART_MR1_CTS_CTL;
+		mr |= UART_MR1_RX_RDY_CTL;
+	}
+	msm_write(port, mr, UART_MR1);
+
+	/* Configure status bits to ignore based on termio flags. */
+	port->read_status_mask = 0;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= UART_SR_RX_BREAK;
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *msm_type(struct uart_port *port)
+{
+	return "MSM";
+}
+
+static void msm_release_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *resource;
+	resource_size_t size;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return;
+	size = resource->end - resource->start + 1;
+
+	release_mem_region(port->mapbase, size);
+	iounmap(port->membase);
+	port->membase = NULL;
+}
+
+static int msm_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *resource;
+	resource_size_t size;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return -ENXIO;
+	size = resource->end - resource->start + 1;
+
+	if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial")))
+		return -EBUSY;
+
+	port->membase = ioremap(port->mapbase, size);
+	if (!port->membase) {
+		release_mem_region(port->mapbase, size);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void msm_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_MSM;
+		msm_request_port(port);
+	}
+}
+
+static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
+		return -EINVAL;
+	if (unlikely(port->irq != ser->irq))
+		return -EINVAL;
+	return 0;
+}
+
+static void msm_power(struct uart_port *port, unsigned int state,
+		      unsigned int oldstate)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	switch (state) {
+	case 0:
+		clk_enable(msm_port->clk);
+		break;
+	case 3:
+		clk_disable(msm_port->clk);
+		break;
+	default:
+		printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state);
+	}
+}
+
+static struct uart_ops msm_uart_pops = {
+	.tx_empty = msm_tx_empty,
+	.set_mctrl = msm_set_mctrl,
+	.get_mctrl = msm_get_mctrl,
+	.stop_tx = msm_stop_tx,
+	.start_tx = msm_start_tx,
+	.stop_rx = msm_stop_rx,
+	.enable_ms = msm_enable_ms,
+	.break_ctl = msm_break_ctl,
+	.startup = msm_startup,
+	.shutdown = msm_shutdown,
+	.set_termios = msm_set_termios,
+	.type = msm_type,
+	.release_port = msm_release_port,
+	.request_port = msm_request_port,
+	.config_port = msm_config_port,
+	.verify_port = msm_verify_port,
+	.pm = msm_power,
+};
+
+static struct msm_port msm_uart_ports[] = {
+	{
+		.uart = {
+			.iotype = UPIO_MEM,
+			.ops = &msm_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.fifosize = 512,
+			.line = 0,
+		},
+	},
+	{
+		.uart = {
+			.iotype = UPIO_MEM,
+			.ops = &msm_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.fifosize = 512,
+			.line = 1,
+		},
+	},
+	{
+		.uart = {
+			.iotype = UPIO_MEM,
+			.ops = &msm_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.fifosize = 64,
+			.line = 2,
+		},
+	},
+};
+
+#define UART_NR	ARRAY_SIZE(msm_uart_ports)
+
+static inline struct uart_port *get_port_from_line(unsigned int line)
+{
+	return &msm_uart_ports[line].uart;
+}
+
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+
+static void msm_console_putchar(struct uart_port *port, int c)
+{
+	while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+		;
+	msm_write(port, c, UART_TF);
+}
+
+static void msm_console_write(struct console *co, const char *s,
+			      unsigned int count)
+{
+	struct uart_port *port;
+	struct msm_port *msm_port;
+
+	BUG_ON(co->index < 0 || co->index >= UART_NR);
+
+	port = get_port_from_line(co->index);
+	msm_port = UART_TO_MSM(port);
+
+	spin_lock(&port->lock);
+	uart_console_write(port, s, count, msm_console_putchar);
+	spin_unlock(&port->lock);
+}
+
+static int __init msm_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud, flow, bits, parity;
+
+	if (unlikely(co->index >= UART_NR || co->index < 0))
+		return -ENXIO;
+
+	port = get_port_from_line(co->index);
+
+	if (unlikely(!port->membase))
+		return -ENXIO;
+
+	port->cons = co;
+
+	msm_init_clock(port);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	bits = 8;
+	parity = 'n';
+	flow = 'n';
+	msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE,
+		  UART_MR2);	/* 8N1 */
+
+	if (baud < 300 || baud > 115200)
+		baud = 115200;
+	msm_set_baud_rate(port, baud);
+
+	msm_reset(port);
+
+	printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver msm_uart_driver;
+
+static struct console msm_console = {
+	.name = "ttyMSM",
+	.write = msm_console_write,
+	.device = uart_console_device,
+	.setup = msm_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &msm_uart_driver,
+};
+
+#define MSM_CONSOLE	(&msm_console)
+
+#else
+#define MSM_CONSOLE	NULL
+#endif
+
+static struct uart_driver msm_uart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "msm_serial",
+	.dev_name = "ttyMSM",
+	.nr = UART_NR,
+	.cons = MSM_CONSOLE,
+};
+
+static int __init msm_serial_probe(struct platform_device *pdev)
+{
+	struct msm_port *msm_port;
+	struct resource *resource;
+	struct uart_port *port;
+
+	if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
+		return -ENXIO;
+
+	printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id);
+
+	port = get_port_from_line(pdev->id);
+	port->dev = &pdev->dev;
+	msm_port = UART_TO_MSM(port);
+
+	msm_port->clk = clk_get(&pdev->dev, "uart_clk");
+	if (unlikely(IS_ERR(msm_port->clk)))
+		return PTR_ERR(msm_port->clk);
+	port->uartclk = clk_get_rate(msm_port->clk);
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return -ENXIO;
+	port->mapbase = resource->start;
+
+	port->irq = platform_get_irq(pdev, 0);
+	if (unlikely(port->irq < 0))
+		return -ENXIO;
+
+	platform_set_drvdata(pdev, port);
+
+	return uart_add_one_port(&msm_uart_driver, port);
+}
+
+static int __devexit msm_serial_remove(struct platform_device *pdev)
+{
+	struct msm_port *msm_port = platform_get_drvdata(pdev);
+
+	clk_put(msm_port->clk);
+
+	return 0;
+}
+
+static struct platform_driver msm_platform_driver = {
+	.probe = msm_serial_probe,
+	.remove = msm_serial_remove,
+	.driver = {
+		.name = "msm_serial",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init msm_serial_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&msm_uart_driver);
+	if (unlikely(ret))
+		return ret;
+
+	ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe);
+	if (unlikely(ret))
+		uart_unregister_driver(&msm_uart_driver);
+
+	printk(KERN_INFO "msm_serial: driver initialized\n");
+
+	return ret;
+}
+
+static void __exit msm_serial_exit(void)
+{
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+	unregister_console(&msm_console);
+#endif
+	platform_driver_unregister(&msm_platform_driver);
+	uart_unregister_driver(&msm_uart_driver);
+}
+
+module_init(msm_serial_init);
+module_exit(msm_serial_exit);
+
+MODULE_AUTHOR("Robert Love <rlove@google.com>");
+MODULE_DESCRIPTION("Driver for msm7x serial device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h
new file mode 100644
index 000000000000..689f1fa0e84e
--- /dev/null
+++ b/drivers/serial/msm_serial.h
@@ -0,0 +1,117 @@
+/*
+ * drivers/serial/msm_serial.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H
+#define __DRIVERS_SERIAL_MSM_SERIAL_H
+
+#define UART_MR1			0x0000
+
+#define UART_MR1_AUTO_RFR_LEVEL0	0x3F
+#define UART_MR1_AUTO_RFR_LEVEL1	0x3FF00
+#define UART_MR1_RX_RDY_CTL    		(1 << 7)
+#define UART_MR1_CTS_CTL       		(1 << 6)
+
+#define UART_MR2			0x0004
+#define UART_MR2_ERROR_MODE		(1 << 6)
+#define UART_MR2_BITS_PER_CHAR		0x30
+#define UART_MR2_BITS_PER_CHAR_5	(0x0 << 4)
+#define UART_MR2_BITS_PER_CHAR_6	(0x1 << 4)
+#define UART_MR2_BITS_PER_CHAR_7	(0x2 << 4)
+#define UART_MR2_BITS_PER_CHAR_8	(0x3 << 4)
+#define UART_MR2_STOP_BIT_LEN_ONE	(0x1 << 2)
+#define UART_MR2_STOP_BIT_LEN_TWO	(0x3 << 2)
+#define UART_MR2_PARITY_MODE_NONE	0x0
+#define UART_MR2_PARITY_MODE_ODD	0x1
+#define UART_MR2_PARITY_MODE_EVEN	0x2
+#define UART_MR2_PARITY_MODE_SPACE	0x3
+#define UART_MR2_PARITY_MODE		0x3
+
+#define UART_CSR	0x0008
+#define UART_CSR_115200	0xFF
+#define UART_CSR_57600	0xEE
+#define UART_CSR_38400	0xDD
+#define UART_CSR_28800	0xCC
+#define UART_CSR_19200	0xBB
+#define UART_CSR_14400	0xAA
+#define UART_CSR_9600	0x99
+#define UART_CSR_4800	0x77
+#define UART_CSR_2400	0x55
+#define UART_CSR_1200	0x44
+#define UART_CSR_600	0x33
+#define UART_CSR_300	0x22
+
+#define UART_TF		0x000C
+
+#define UART_CR				0x0010
+#define UART_CR_CMD_NULL		(0 << 4)
+#define UART_CR_CMD_RESET_RX		(1 << 4)
+#define UART_CR_CMD_RESET_TX		(2 << 4)
+#define UART_CR_CMD_RESET_ERR		(3 << 4)
+#define UART_CR_CMD_RESET_BREAK_INT	(4 << 4)
+#define UART_CR_CMD_START_BREAK		(5 << 4)
+#define UART_CR_CMD_STOP_BREAK		(6 << 4)
+#define UART_CR_CMD_RESET_CTS		(7 << 4)
+#define UART_CR_CMD_PACKET_MODE		(9 << 4)
+#define UART_CR_CMD_MODE_RESET		(12 << 4)
+#define UART_CR_CMD_SET_RFR		(13 << 4)
+#define UART_CR_CMD_RESET_RFR		(14 << 4)
+#define UART_CR_TX_DISABLE		(1 << 3)
+#define UART_CR_TX_ENABLE		(1 << 3)
+#define UART_CR_RX_DISABLE		(1 << 3)
+#define UART_CR_RX_ENABLE		(1 << 3)
+
+#define UART_IMR		0x0014
+#define UART_IMR_TXLEV		(1 << 0)
+#define UART_IMR_RXSTALE	(1 << 3)
+#define UART_IMR_RXLEV		(1 << 4)
+#define UART_IMR_DELTA_CTS	(1 << 5)
+#define UART_IMR_CURRENT_CTS	(1 << 6)
+
+#define UART_IPR_RXSTALE_LAST		0x20
+#define UART_IPR_STALE_LSB		0x1F
+#define UART_IPR_STALE_TIMEOUT_MSB	0x3FF80
+
+#define UART_IPR	0x0018
+#define UART_TFWR	0x001C
+#define UART_RFWR	0x0020
+#define UART_HCR	0x0024
+
+#define UART_MREG		0x0028
+#define UART_NREG		0x002C
+#define UART_DREG		0x0030
+#define UART_MNDREG		0x0034
+#define UART_IRDA		0x0038
+#define UART_MISR_MODE		0x0040
+#define UART_MISR_RESET		0x0044
+#define UART_MISR_EXPORT	0x0048
+#define UART_MISR_VAL		0x004C
+#define UART_TEST_CTRL		0x0050
+
+#define UART_SR			0x0008
+#define UART_SR_HUNT_CHAR	(1 << 7)
+#define UART_SR_RX_BREAK	(1 << 6)
+#define UART_SR_PAR_FRAME_ERR	(1 << 5)
+#define UART_SR_OVERRUN		(1 << 4)
+#define UART_SR_TX_EMPTY	(1 << 3)
+#define UART_SR_TX_READY	(1 << 2)
+#define UART_SR_RX_FULL		(1 << 1)
+#define UART_SR_RX_READY	(1 << 0)
+
+#define UART_RF		0x000C
+#define UART_MISR	0x0010
+#define UART_ISR	0x0014
+
+#endif	/* __DRIVERS_SERIAL_MSM_SERIAL_H */
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 54483cd3529e..02406ba6da1c 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -67,7 +67,7 @@ static int __devinit of_platform_serial_setup(struct of_device *ofdev,
 	port->type = type;
 	port->uartclk = *clk;
 	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
-		| UPF_FIXED_PORT;
+		| UPF_FIXED_PORT | UPF_FIXED_TYPE;
 	port->dev = &ofdev->dev;
 	/* If current-speed was set, then try not to change it. */
 	if (spd)
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index 4873f2978bd2..fb00ed5296e6 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -78,7 +78,7 @@ static int s3c2400_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c2400_serial_drv = {
 	.probe		= s3c2400_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c2400-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 87c182ef71b8..b5d7cbcba2ae 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -90,7 +90,7 @@ static int s3c2410_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c2410_serial_drv = {
 	.probe		= s3c2410_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c2410-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index fd017b375568..11dcb90bdfef 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -123,7 +123,7 @@ static int s3c2412_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c2412_serial_drv = {
 	.probe		= s3c2412_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c2412-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 29cbb0afef8e..06c5b0cc47a3 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -153,7 +153,7 @@ static int s3c2440_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c2440_serial_drv = {
 	.probe		= s3c2440_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c2440-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index ebf2fd3c8f7d..786a067d62ac 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -94,7 +94,7 @@ static int s3c24a0_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c24a0_serial_drv = {
 	.probe		= s3c24a0_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c24a0-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 3e3785233682..48f1a3781f0d 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -124,7 +124,7 @@ static int s3c6400_serial_probe(struct platform_device *dev)
 
 static struct platform_driver s3c6400_serial_drv = {
 	.probe		= s3c6400_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
 		.name	= "s3c6400-uart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 93b5d75db126..c8851a0db63a 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1174,7 +1174,7 @@ int s3c24xx_serial_probe(struct platform_device *dev,
 
 EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
 
-int s3c24xx_serial_remove(struct platform_device *dev)
+int __devexit s3c24xx_serial_remove(struct platform_device *dev)
 {
 	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
 
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 7afb94843a08..d3fe315969f6 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -72,7 +72,7 @@ struct s3c24xx_uart_port {
 extern int s3c24xx_serial_probe(struct platform_device *dev,
 				struct s3c24xx_uart_info *uart);
 
-extern int s3c24xx_serial_remove(struct platform_device *dev);
+extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
 
 extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
 				      struct s3c24xx_uart_info *uart);
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index a4fb343a08da..319e8b83f6be 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -204,7 +204,7 @@ static int sbd_receive_drain(struct sbd_port *sport)
 {
 	int loops = 10000;
 
-	while (sbd_receive_ready(sport) && loops--)
+	while (sbd_receive_ready(sport) && --loops)
 		read_sbdchn(sport, R_DUART_RX_HOLD);
 	return loops;
 }
@@ -218,7 +218,7 @@ static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport)
 {
 	int loops = 10000;
 
-	while (!sbd_transmit_ready(sport) && loops--)
+	while (!sbd_transmit_ready(sport) && --loops)
 		udelay(2);
 	return loops;
 }
@@ -232,7 +232,7 @@ static int sbd_line_drain(struct sbd_port *sport)
 {
 	int loops = 10000;
 
-	while (!sbd_transmit_empty(sport) && loops--)
+	while (!sbd_transmit_empty(sport) && --loops)
 		udelay(2);
 	return loops;
 }
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 7313c2edcb83..54dd16d66a4b 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -461,6 +461,94 @@ static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
 	spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
+/*
+ *	Wait for transmitter & holding register to empty
+ */
+static void wait_for_xmitr(struct uart_txx9_port *up)
+{
+	unsigned int tmout = 10000;
+
+	/* Wait up to 10ms for the character(s) to be sent. */
+	while (--tmout &&
+	       !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
+		udelay(1);
+
+	/* Wait up to 1s for flow control if necessary */
+	if (up->port.flags & UPF_CONS_FLOW) {
+		tmout = 1000000;
+		while (--tmout &&
+		       (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
+			udelay(1);
+	}
+}
+#endif
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial_txx9_get_poll_char(struct uart_port *port)
+{
+	unsigned int ier;
+	unsigned char c;
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+
+	/*
+	 *	First save the IER then disable the interrupts
+	 */
+	ier = sio_in(up, TXX9_SIDICR);
+	sio_out(up, TXX9_SIDICR, 0);
+
+	while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID)
+		;
+
+	c = sio_in(up, TXX9_SIRFIFO);
+
+	/*
+	 *	Finally, clear RX interrupt status
+	 *	and restore the IER
+	 */
+	sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS);
+	sio_out(up, TXX9_SIDICR, ier);
+	return c;
+}
+
+
+static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
+{
+	unsigned int ier;
+	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+
+	/*
+	 *	First save the IER then disable the interrupts
+	 */
+	ier = sio_in(up, TXX9_SIDICR);
+	sio_out(up, TXX9_SIDICR, 0);
+
+	wait_for_xmitr(up);
+	/*
+	 *	Send the character out.
+	 *	If a LF, also do CR...
+	 */
+	sio_out(up, TXX9_SITFIFO, c);
+	if (c == 10) {
+		wait_for_xmitr(up);
+		sio_out(up, TXX9_SITFIFO, 13);
+	}
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the IER
+	 */
+	wait_for_xmitr(up);
+	sio_out(up, TXX9_SIDICR, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
 static int serial_txx9_startup(struct uart_port *port)
 {
 	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
@@ -781,6 +869,10 @@ static struct uart_ops serial_txx9_pops = {
 	.release_port	= serial_txx9_release_port,
 	.request_port	= serial_txx9_request_port,
 	.config_port	= serial_txx9_config_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= serial_txx9_get_poll_char,
+	.poll_put_char	= serial_txx9_put_poll_char,
+#endif
 };
 
 static struct uart_txx9_port serial_txx9_ports[UART_NR];
@@ -803,27 +895,6 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv,
 
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 
-/*
- *	Wait for transmitter & holding register to empty
- */
-static inline void wait_for_xmitr(struct uart_txx9_port *up)
-{
-	unsigned int tmout = 10000;
-
-	/* Wait up to 10ms for the character(s) to be sent. */
-	while (--tmout &&
-	       !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
-		udelay(1);
-
-	/* Wait up to 1s for flow control if necessary */
-	if (up->port.flags & UPF_CONS_FLOW) {
-		tmout = 1000000;
-		while (--tmout &&
-		       (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
-			udelay(1);
-	}
-}
-
 static void serial_txx9_console_putchar(struct uart_port *port, int ch)
 {
 	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index a94a2ab4b571..1df5325faab2 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -461,7 +461,7 @@ static void sunhv_console_write_paged(struct console *con, const char *s, unsign
 					break;
 				udelay(1);
 			}
-			if (limit <= 0)
+			if (limit < 0)
 				break;
 			page_bytes -= written;
 			ra += written;
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index ac9e5d5f742e..063a313b755c 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -33,29 +33,29 @@ struct timbuart_port {
 	struct uart_port	port;
 	struct tasklet_struct	tasklet;
 	int			usedma;
-	u8			last_ier;
+	u32			last_ier;
 	struct platform_device  *dev;
 };
 
 static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
 	921600, 1843200, 3250000};
 
-static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier);
+static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
 
 static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
 
 static void timbuart_stop_rx(struct uart_port *port)
 {
 	/* spin lock held by upper layer, disable all RX interrupts */
-	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS;
-	iowrite8(ier, port->membase + TIMBUART_IER);
+	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
+	iowrite32(ier, port->membase + TIMBUART_IER);
 }
 
 static void timbuart_stop_tx(struct uart_port *port)
 {
 	/* spinlock held by upper layer, disable TX interrupt */
-	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE;
-	iowrite8(ier, port->membase + TIMBUART_IER);
+	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
+	iowrite32(ier, port->membase + TIMBUART_IER);
 }
 
 static void timbuart_start_tx(struct uart_port *port)
@@ -72,14 +72,14 @@ static void timbuart_flush_buffer(struct uart_port *port)
 	u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
 
 	iowrite8(ctl, port->membase + TIMBUART_CTRL);
-	iowrite8(TXBF, port->membase + TIMBUART_ISR);
+	iowrite32(TXBF, port->membase + TIMBUART_ISR);
 }
 
 static void timbuart_rx_chars(struct uart_port *port)
 {
 	struct tty_struct *tty = port->info->port.tty;
 
-	while (ioread8(port->membase + TIMBUART_ISR) & RXDP) {
+	while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
 		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
 		port->icount.rx++;
 		tty_insert_flip_char(tty, ch, TTY_NORMAL);
@@ -97,7 +97,7 @@ static void timbuart_tx_chars(struct uart_port *port)
 {
 	struct circ_buf *xmit = &port->info->xmit;
 
-	while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) &&
+	while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
 		!uart_circ_empty(xmit)) {
 		iowrite8(xmit->buf[xmit->tail],
 			port->membase + TIMBUART_TXFIFO);
@@ -114,7 +114,7 @@ static void timbuart_tx_chars(struct uart_port *port)
 		ioread8(port->membase + TIMBUART_BAUDRATE));
 }
 
-static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
+static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
 {
 	struct timbuart_port *uart =
 		container_of(port, struct timbuart_port, port);
@@ -129,7 +129,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
 	if (isr & TXFLAGS) {
 		timbuart_tx_chars(port);
 		/* clear all TX interrupts */
-		iowrite8(TXFLAGS, port->membase + TIMBUART_ISR);
+		iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
 
 		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 			uart_write_wakeup(port);
@@ -148,7 +148,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
 	dev_dbg(port->dev, "%s - leaving\n", __func__);
 }
 
-void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
+void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
 {
 	if (isr & RXFLAGS) {
 		/* Some RX status is set */
@@ -161,7 +161,7 @@ void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
 			timbuart_rx_chars(port);
 
 		/* ack all RX interrupts */
-		iowrite8(RXFLAGS, port->membase + TIMBUART_ISR);
+		iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
 	}
 
 	/* always have the RX interrupts enabled */
@@ -173,11 +173,11 @@ void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
 void timbuart_tasklet(unsigned long arg)
 {
 	struct timbuart_port *uart = (struct timbuart_port *)arg;
-	u8 isr, ier = 0;
+	u32 isr, ier = 0;
 
 	spin_lock(&uart->port.lock);
 
-	isr = ioread8(uart->port.membase + TIMBUART_ISR);
+	isr = ioread32(uart->port.membase + TIMBUART_ISR);
 	dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
 
 	if (!uart->usedma)
@@ -188,7 +188,7 @@ void timbuart_tasklet(unsigned long arg)
 	if (!uart->usedma)
 		timbuart_handle_rx_port(&uart->port, isr, &ier);
 
-	iowrite8(ier, uart->port.membase + TIMBUART_IER);
+	iowrite32(ier, uart->port.membase + TIMBUART_IER);
 
 	spin_unlock(&uart->port.lock);
 	dev_dbg(uart->port.dev, "%s leaving\n", __func__);
@@ -196,9 +196,9 @@ void timbuart_tasklet(unsigned long arg)
 
 static unsigned int timbuart_tx_empty(struct uart_port *port)
 {
-	u8 isr = ioread8(port->membase + TIMBUART_ISR);
+	u32 isr = ioread32(port->membase + TIMBUART_ISR);
 
-	return (isr & TXBAE) ? TIOCSER_TEMT : 0;
+	return (isr & TXBE) ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int timbuart_get_mctrl(struct uart_port *port)
@@ -222,13 +222,13 @@ static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
 }
 
-static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier)
+static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
 {
 	unsigned int cts;
 
 	if (isr & CTS_DELTA) {
 		/* ack */
-		iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR);
+		iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
 		cts = timbuart_get_mctrl(port);
 		uart_handle_cts_change(port, cts & TIOCM_CTS);
 		wake_up_interruptible(&port->info->delta_msr_wait);
@@ -255,9 +255,9 @@ static int timbuart_startup(struct uart_port *port)
 	dev_dbg(port->dev, "%s\n", __func__);
 
 	iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
-	iowrite8(0xff, port->membase + TIMBUART_ISR);
+	iowrite32(0x1ff, port->membase + TIMBUART_ISR);
 	/* Enable all but TX interrupts */
-	iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA,
+	iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
 		port->membase + TIMBUART_IER);
 
 	return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
@@ -270,7 +270,7 @@ static void timbuart_shutdown(struct uart_port *port)
 		container_of(port, struct timbuart_port, port);
 	dev_dbg(port->dev, "%s\n", __func__);
 	free_irq(port->irq, uart);
-	iowrite8(0, port->membase + TIMBUART_IER);
+	iowrite32(0, port->membase + TIMBUART_IER);
 }
 
 static int get_bindex(int baud)
@@ -359,10 +359,10 @@ static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
 	struct timbuart_port *uart = (struct timbuart_port *)devid;
 
 	if (ioread8(uart->port.membase + TIMBUART_IPR)) {
-		uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER);
+		uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
 
 		/* disable interrupts, the tasklet enables them again */
-		iowrite8(0, uart->port.membase + TIMBUART_IER);
+		iowrite32(0, uart->port.membase + TIMBUART_IER);
 
 		/* fire off bottom half */
 		tasklet_schedule(&uart->tasklet);
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 7de66c06b05d..e945e780b5c9 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -681,22 +681,27 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 	out_be16(&uccup->rccm, 0xc0ff);
 
 	/* Configure the GUMR registers for UART */
-	if (soft_uart)
+	if (soft_uart) {
 		/* Soft-UART requires a 1X multiplier for TX */
 		clrsetbits_be32(&uccp->gumr_l,
 			UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
 			UCC_SLOW_GUMR_L_RDCR_MASK,
 			UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
 			UCC_SLOW_GUMR_L_RDCR_16);
-	else
+
+		clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
+			UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+	} else {
 		clrsetbits_be32(&uccp->gumr_l,
 			UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
 			UCC_SLOW_GUMR_L_RDCR_MASK,
 			UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
 			UCC_SLOW_GUMR_L_RDCR_16);
 
-	clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
-		UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+		clrsetbits_be32(&uccp->gumr_h,
+			UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX,
+			UCC_SLOW_GUMR_H_RFW);
+	}
 
 #ifdef LOOPBACK
 	clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
@@ -706,7 +711,7 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 		UCC_SLOW_GUMR_H_CDS);
 #endif
 
-	/* Enable rx interrupts  and clear all pending events.  */
+	/* Disable rx interrupts  and clear all pending events.  */
 	out_be16(&uccp->uccm, 0);
 	out_be16(&uccp->ucce, 0xffff);
 	out_be16(&uccp->udsr, 0x7e7e);
@@ -765,6 +770,10 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 		cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
 		qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
 			QE_CR_PROTOCOL_UNSPECIFIED, 0);
+	} else {
+		cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
+		qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
+			QE_CR_PROTOCOL_UART, 0);
 	}
 }
 
diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
index 9e6a873f8203..d8c2809b1ab6 100644
--- a/drivers/serial/zs.c
+++ b/drivers/serial/zs.c
@@ -231,7 +231,7 @@ static int zs_receive_drain(struct zs_port *zport)
 {
 	int loops = 10000;
 
-	while ((read_zsreg(zport, R0) & Rx_CH_AV) && loops--)
+	while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops)
 		read_zsdata(zport);
 	return loops;
 }
@@ -241,7 +241,7 @@ static int zs_transmit_drain(struct zs_port *zport, int irq)
 	struct zs_scc *scc = zport->scc;
 	int loops = 10000;
 
-	while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && loops--) {
+	while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) {
 		zs_spin_unlock_cond_irq(&scc->zlock, irq);
 		udelay(2);
 		zs_spin_lock_cond_irq(&scc->zlock, irq);
@@ -254,7 +254,7 @@ static int zs_line_drain(struct zs_port *zport, int irq)
 	struct zs_scc *scc = zport->scc;
 	int loops = 10000;
 
-	while (!(read_zsreg(zport, R1) & ALL_SNT) && loops--) {
+	while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) {
 		zs_spin_unlock_cond_irq(&scc->zlock, irq);
 		udelay(2);
 		zs_spin_lock_cond_irq(&scc->zlock, irq);