1 files changed, 0 insertions, 261 deletions
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
deleted file mode 100644
index d680b3e3295f..000000000000
--- a/drivers/ide/ide-pm.c
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/ide.h>
-
-int generic_ide_suspend(struct device *dev, pm_message_t mesg)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	ide_drive_t *pair = ide_get_pair_dev(drive);
-	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq;
-	struct ide_pm_state rqpm;
-	int ret;
-
-	if (ide_port_acpi(hwif)) {
-		/* call ACPI _GTM only once */
-		if ((drive->dn & 1) == 0 || pair == NULL)
-			ide_acpi_get_timing(hwif);
-	}
-
-	memset(&rqpm, 0, sizeof(rqpm));
-	rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
-	ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
-	ide_req(rq)->special = &rqpm;
-	rqpm.pm_step = IDE_PM_START_SUSPEND;
-	if (mesg.event == PM_EVENT_PRETHAW)
-		mesg.event = PM_EVENT_FREEZE;
-	rqpm.pm_state = mesg.event;
-
-	blk_execute_rq(NULL, rq, 0);
-	ret = scsi_req(rq)->result ? -EIO : 0;
-	blk_put_request(rq);
-
-	if (ret == 0 && ide_port_acpi(hwif)) {
-		/* call ACPI _PS3 only after both devices are suspended */
-		if ((drive->dn & 1) || pair == NULL)
-			ide_acpi_set_state(hwif, 0);
-	}
-
-	return ret;
-}
-
-static int ide_pm_execute_rq(struct request *rq)
-{
-	struct request_queue *q = rq->q;
-
-	if (unlikely(blk_queue_dying(q))) {
-		rq->rq_flags |= RQF_QUIET;
-		scsi_req(rq)->result = -ENXIO;
-		blk_mq_end_request(rq, BLK_STS_OK);
-		return -ENXIO;
-	}
-	blk_execute_rq(NULL, rq, true);
-
-	return scsi_req(rq)->result ? -EIO : 0;
-}
-
-int generic_ide_resume(struct device *dev)
-{
-	ide_drive_t *drive = to_ide_device(dev);
-	ide_drive_t *pair = ide_get_pair_dev(drive);
-	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq;
-	struct ide_pm_state rqpm;
-	int err;
-
-	blk_mq_start_stopped_hw_queues(drive->queue, true);
-
-	if (ide_port_acpi(hwif)) {
-		/* call ACPI _PS0 / _STM only once */
-		if ((drive->dn & 1) == 0 || pair == NULL) {
-			ide_acpi_set_state(hwif, 1);
-			ide_acpi_push_timing(hwif);
-		}
-
-		ide_acpi_exec_tfs(drive);
-	}
-
-	memset(&rqpm, 0, sizeof(rqpm));
-	rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PM);
-	ide_req(rq)->type = ATA_PRIV_PM_RESUME;
-	ide_req(rq)->special = &rqpm;
-	rqpm.pm_step = IDE_PM_START_RESUME;
-	rqpm.pm_state = PM_EVENT_ON;
-
-	err = ide_pm_execute_rq(rq);
-	blk_put_request(rq);
-
-	if (err == 0 && dev->driver) {
-		struct ide_driver *drv = to_ide_driver(dev->driver);
-
-		if (drv->resume)
-			drv->resume(drive);
-	}
-
-	return err;
-}
-
-void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
-{
-	struct ide_pm_state *pm = ide_req(rq)->special;
-
-#ifdef DEBUG_PM
-	printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
-		drive->name, pm->pm_step);
-#endif
-	if (drive->media != ide_disk)
-		return;
-
-	switch (pm->pm_step) {
-	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
-		if (pm->pm_state == PM_EVENT_FREEZE)
-			pm->pm_step = IDE_PM_COMPLETED;
-		else
-			pm->pm_step = IDE_PM_STANDBY;
-		break;
-	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
-		pm->pm_step = IDE_PM_COMPLETED;
-		break;
-	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
-		pm->pm_step = IDE_PM_IDLE;
-		break;
-	case IDE_PM_IDLE:		/* Resume step 2 (idle)*/
-		pm->pm_step = IDE_PM_RESTORE_DMA;
-		break;
-	}
-}
-
-ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
-{
-	struct ide_pm_state *pm = ide_req(rq)->special;
-	struct ide_cmd cmd = { };
-
-	switch (pm->pm_step) {
-	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
-		if (drive->media != ide_disk)
-			break;
-		/* Not supported? Switch to next step now. */
-		if (ata_id_flush_enabled(drive->id) == 0 ||
-		    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
-			ide_complete_power_step(drive, rq);
-			return ide_stopped;
-		}
-		if (ata_id_flush_ext_enabled(drive->id))
-			cmd.tf.command = ATA_CMD_FLUSH_EXT;
-		else
-			cmd.tf.command = ATA_CMD_FLUSH;
-		goto out_do_tf;
-	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
-		cmd.tf.command = ATA_CMD_STANDBYNOW1;
-		goto out_do_tf;
-	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
-		ide_set_max_pio(drive);
-		/*
-		 * skip IDE_PM_IDLE for ATAPI devices
-		 */
-		if (drive->media != ide_disk)
-			pm->pm_step = IDE_PM_RESTORE_DMA;
-		else
-			ide_complete_power_step(drive, rq);
-		return ide_stopped;
-	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
-		cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
-		goto out_do_tf;
-	case IDE_PM_RESTORE_DMA:	/* Resume step 3 (restore DMA) */
-		/*
-		 * Right now, all we do is call ide_set_dma(drive),
-		 * we could be smarter and check for current xfer_speed
-		 * in struct drive etc...
-		 */
-		if (drive->hwif->dma_ops == NULL)
-			break;
-		/*
-		 * TODO: respect IDE_DFLAG_USING_DMA
-		 */
-		ide_set_dma(drive);
-		break;
-	}
-
-	pm->pm_step = IDE_PM_COMPLETED;
-
-	return ide_stopped;
-
-out_do_tf:
-	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
-	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
-	cmd.protocol = ATA_PROT_NODATA;
-
-	return do_rw_taskfile(drive, &cmd);
-}
-
-/**
- *	ide_complete_pm_rq - end the current Power Management request
- *	@drive: target drive
- *	@rq: request
- *
- *	This function cleans up the current PM request and stops the queue
- *	if necessary.
- */
-void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
-{
-	struct request_queue *q = drive->queue;
-	struct ide_pm_state *pm = ide_req(rq)->special;
-
-	ide_complete_power_step(drive, rq);
-	if (pm->pm_step != IDE_PM_COMPLETED)
-		return;
-
-#ifdef DEBUG_PM
-	printk("%s: completing PM request, %s\n", drive->name,
-	       (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
-#endif
-	if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
-		blk_mq_stop_hw_queues(q);
-	else
-		drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
-
-	drive->hwif->rq = NULL;
-
-	blk_mq_end_request(rq, BLK_STS_OK);
-}
-
-void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
-{
-	struct ide_pm_state *pm = ide_req(rq)->special;
-
-	if (blk_rq_is_private(rq) &&
-	    ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
-	    pm->pm_step == IDE_PM_START_SUSPEND)
-		/* Mark drive blocked when starting the suspend sequence. */
-		drive->dev_flags |= IDE_DFLAG_BLOCKED;
-	else if (blk_rq_is_private(rq) &&
-	         ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
-		 pm->pm_step == IDE_PM_START_RESUME) {
-		/*
-		 * The first thing we do on wakeup is to wait for BSY bit to
-		 * go away (with a looong timeout) as a drive on this hwif may
-		 * just be POSTing itself.
-		 * We do that before even selecting as the "other" device on
-		 * the bus may be broken enough to walk on our toes at this
-		 * point.
-		 */
-		ide_hwif_t *hwif = drive->hwif;
-		const struct ide_tp_ops *tp_ops = hwif->tp_ops;
-		struct request_queue *q = drive->queue;
-		int rc;
-#ifdef DEBUG_PM
-		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
-#endif
-		rc = ide_wait_not_busy(hwif, 35000);
-		if (rc)
-			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
-		tp_ops->dev_select(drive);
-		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-		rc = ide_wait_not_busy(hwif, 100000);
-		if (rc)
-			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
-
-		blk_mq_start_hw_queues(q);
-	}
-}