diff options
Diffstat (limited to 'drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_7.h')
| -rw-r--r-- | drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_7.h | 1562 |
1 files changed, 1562 insertions, 0 deletions
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_7.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_7.h new file mode 100644 index 000000000000..d99b4b47d49d --- /dev/null +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_7.h @@ -0,0 +1,1562 @@ +/* + * Copyright 2022 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ +#ifndef SMU13_DRIVER_IF_SMU_13_0_7_H +#define SMU13_DRIVER_IF_SMU_13_0_7_H + +// *** IMPORTANT *** +// PMFW TEAM: Always increment the interface version on any change to this file +#define SMU13_DRIVER_IF_VERSION 0x28 + +//Increment this version if SkuTable_t or BoardTable_t change +#define PPTABLE_VERSION 0x1D + +#define NUM_GFXCLK_DPM_LEVELS 16 +#define NUM_SOCCLK_DPM_LEVELS 8 +#define NUM_MP0CLK_DPM_LEVELS 2 +#define NUM_DCLK_DPM_LEVELS 8 +#define NUM_VCLK_DPM_LEVELS 8 +#define NUM_DISPCLK_DPM_LEVELS 8 +#define NUM_DPPCLK_DPM_LEVELS 8 +#define NUM_DPREFCLK_DPM_LEVELS 8 +#define NUM_DCFCLK_DPM_LEVELS 8 +#define NUM_DTBCLK_DPM_LEVELS 8 +#define NUM_UCLK_DPM_LEVELS 4 +#define NUM_LINK_LEVELS 3 +#define NUM_FCLK_DPM_LEVELS 8 +#define NUM_OD_FAN_MAX_POINTS 6 + +// Feature Control Defines +#define FEATURE_FW_DATA_READ_BIT 0 +#define FEATURE_DPM_GFXCLK_BIT 1 +#define FEATURE_DPM_GFX_POWER_OPTIMIZER_BIT 2 +#define FEATURE_DPM_UCLK_BIT 3 +#define FEATURE_DPM_FCLK_BIT 4 +#define FEATURE_DPM_SOCCLK_BIT 5 +#define FEATURE_DPM_MP0CLK_BIT 6 +#define FEATURE_DPM_LINK_BIT 7 +#define FEATURE_DPM_DCN_BIT 8 +#define FEATURE_VMEMP_SCALING_BIT 9 +#define FEATURE_VDDIO_MEM_SCALING_BIT 10 +#define FEATURE_DS_GFXCLK_BIT 11 +#define FEATURE_DS_SOCCLK_BIT 12 +#define FEATURE_DS_FCLK_BIT 13 +#define FEATURE_DS_LCLK_BIT 14 +#define FEATURE_DS_DCFCLK_BIT 15 +#define FEATURE_DS_UCLK_BIT 16 +#define FEATURE_GFX_ULV_BIT 17 +#define FEATURE_FW_DSTATE_BIT 18 +#define FEATURE_GFXOFF_BIT 19 +#define FEATURE_BACO_BIT 20 +#define FEATURE_MM_DPM_BIT 21 +#define FEATURE_SOC_MPCLK_DS_BIT 22 +#define FEATURE_BACO_MPCLK_DS_BIT 23 +#define FEATURE_THROTTLERS_BIT 24 +#define FEATURE_SMARTSHIFT_BIT 25 +#define FEATURE_GTHR_BIT 26 +#define FEATURE_ACDC_BIT 27 +#define FEATURE_VR0HOT_BIT 28 +#define FEATURE_FW_CTF_BIT 29 +#define FEATURE_FAN_CONTROL_BIT 30 +#define FEATURE_GFX_DCS_BIT 31 +#define FEATURE_GFX_READ_MARGIN_BIT 32 +#define FEATURE_LED_DISPLAY_BIT 33 +#define FEATURE_GFXCLK_SPREAD_SPECTRUM_BIT 34 +#define FEATURE_OUT_OF_BAND_MONITOR_BIT 35 +#define FEATURE_OPTIMIZED_VMIN_BIT 36 +#define FEATURE_GFX_IMU_BIT 37 +#define FEATURE_BOOT_TIME_CAL_BIT 38 +#define FEATURE_GFX_PCC_DFLL_BIT 39 +#define FEATURE_SOC_CG_BIT 40 +#define FEATURE_DF_CSTATE_BIT 41 +#define FEATURE_GFX_EDC_BIT 42 +#define FEATURE_BOOT_POWER_OPT_BIT 43 +#define FEATURE_CLOCK_POWER_DOWN_BYPASS_BIT 44 +#define FEATURE_DS_VCN_BIT 45 +#define FEATURE_BACO_CG_BIT 46 +#define FEATURE_MEM_TEMP_READ_BIT 47 +#define FEATURE_ATHUB_MMHUB_PG_BIT 48 +#define FEATURE_SOC_PCC_BIT 49 +#define FEATURE_SPARE_50_BIT 50 +#define FEATURE_SPARE_51_BIT 51 +#define FEATURE_SPARE_52_BIT 52 +#define FEATURE_SPARE_53_BIT 53 +#define FEATURE_SPARE_54_BIT 54 +#define FEATURE_SPARE_55_BIT 55 +#define FEATURE_SPARE_56_BIT 56 +#define FEATURE_SPARE_57_BIT 57 +#define FEATURE_SPARE_58_BIT 58 +#define FEATURE_SPARE_59_BIT 59 +#define FEATURE_SPARE_60_BIT 60 +#define FEATURE_SPARE_61_BIT 61 +#define FEATURE_SPARE_62_BIT 62 +#define FEATURE_SPARE_63_BIT 63 +#define NUM_FEATURES 64 + +//For use with feature control messages +typedef enum { + FEATURE_PWR_ALL, + FEATURE_PWR_S5, + FEATURE_PWR_BACO, + FEATURE_PWR_SOC, + FEATURE_PWR_GFX, + FEATURE_PWR_DOMAIN_COUNT, +} FEATURE_PWR_DOMAIN_e; + + +// Debug Overrides Bitmask +#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_FCLK 0x00000001 +#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_DCN_FCLK 0x00000002 +#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_MP0_FCLK 0x00000004 +#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_DCFCLK 0x00000008 +#define DEBUG_OVERRIDE_DISABLE_FAST_FCLK_TIMER 0x00000010 +#define DEBUG_OVERRIDE_DISABLE_VCN_PG 0x00000020 +#define DEBUG_OVERRIDE_DISABLE_FMAX_VMAX 0x00000040 +#define DEBUG_OVERRIDE_DISABLE_IMU_FW_CHECKS 0x00000080 +#define DEBUG_OVERRIDE_DISABLE_D0i2_REENTRY_HSR_TIMER_CHECK 0x00000100 +#define DEBUG_OVERRIDE_DISABLE_DFLL 0x00000200 +#define DEBUG_OVERRIDE_ENABLE_RLC_VF_BRINGUP_MODE 0x00000400 +#define DEBUG_OVERRIDE_DFLL_MASTER_MODE 0x00000800 + +// VR Mapping Bit Defines +#define VR_MAPPING_VR_SELECT_MASK 0x01 +#define VR_MAPPING_VR_SELECT_SHIFT 0x00 + +#define VR_MAPPING_PLANE_SELECT_MASK 0x02 +#define VR_MAPPING_PLANE_SELECT_SHIFT 0x01 + +// PSI Bit Defines +#define PSI_SEL_VR0_PLANE0_PSI0 0x01 +#define PSI_SEL_VR0_PLANE0_PSI1 0x02 +#define PSI_SEL_VR0_PLANE1_PSI0 0x04 +#define PSI_SEL_VR0_PLANE1_PSI1 0x08 +#define PSI_SEL_VR1_PLANE0_PSI0 0x10 +#define PSI_SEL_VR1_PLANE0_PSI1 0x20 +#define PSI_SEL_VR1_PLANE1_PSI0 0x40 +#define PSI_SEL_VR1_PLANE1_PSI1 0x80 + +typedef enum { + SVI_PSI_0, // Full phase count (default) + SVI_PSI_1, // Phase count 1st level + SVI_PSI_2, // Phase count 2nd level + SVI_PSI_3, // Single phase operation + active diode emulation + SVI_PSI_4, // Single phase operation + passive diode emulation *optional* + SVI_PSI_5, // Reserved + SVI_PSI_6, // Power down to 0V (voltage regulation disabled) + SVI_PSI_7, // Automated phase shedding and diode emulation +} SVI_PSI_e; + +// Throttler Control/Status Bits +#define THROTTLER_TEMP_EDGE_BIT 0 +#define THROTTLER_TEMP_HOTSPOT_BIT 1 +#define THROTTLER_TEMP_HOTSPOT_G_BIT 2 +#define THROTTLER_TEMP_HOTSPOT_M_BIT 3 +#define THROTTLER_TEMP_MEM_BIT 4 +#define THROTTLER_TEMP_VR_GFX_BIT 5 +#define THROTTLER_TEMP_VR_MEM0_BIT 6 +#define THROTTLER_TEMP_VR_MEM1_BIT 7 +#define THROTTLER_TEMP_VR_SOC_BIT 8 +#define THROTTLER_TEMP_VR_U_BIT 9 +#define THROTTLER_TEMP_LIQUID0_BIT 10 +#define THROTTLER_TEMP_LIQUID1_BIT 11 +#define THROTTLER_TEMP_PLX_BIT 12 +#define THROTTLER_TDC_GFX_BIT 13 +#define THROTTLER_TDC_SOC_BIT 14 +#define THROTTLER_TDC_U_BIT 15 +#define THROTTLER_PPT0_BIT 16 +#define THROTTLER_PPT1_BIT 17 +#define THROTTLER_PPT2_BIT 18 +#define THROTTLER_PPT3_BIT 19 +#define THROTTLER_FIT_BIT 20 +#define THROTTLER_GFX_APCC_PLUS_BIT 21 +#define THROTTLER_COUNT 22 + +// FW DState Features Control Bits +#define FW_DSTATE_SOC_ULV_BIT 0 +#define FW_DSTATE_G6_HSR_BIT 1 +#define FW_DSTATE_G6_PHY_VMEMP_OFF_BIT 2 +#define FW_DSTATE_SMN_DS_BIT 3 +#define FW_DSTATE_MP1_WHISPER_MODE_BIT 4 +#define FW_DSTATE_SOC_LIV_MIN_BIT 5 +#define FW_DSTATE_SOC_PLL_PWRDN_BIT 6 +#define FW_DSTATE_MEM_PLL_PWRDN_BIT 7 +#define FW_DSTATE_MALL_ALLOC_BIT 8 +#define FW_DSTATE_MEM_PSI_BIT 9 +#define FW_DSTATE_HSR_NON_STROBE_BIT 10 +#define FW_DSTATE_MP0_ENTER_WFI_BIT 11 +#define FW_DSTATE_U_ULV_BIT 12 +#define FW_DSTATE_MALL_FLUSH_BIT 13 +#define FW_DSTATE_SOC_PSI_BIT 14 +#define FW_DSTATE_U_PSI_BIT 15 +#define FW_DSTATE_UCP_DS_BIT 16 +#define FW_DSTATE_CSRCLK_DS_BIT 17 +#define FW_DSTATE_MMHUB_INTERLOCK_BIT 18 +#define FW_DSTATE_D0i3_2_QUIET_FW_BIT 19 +#define FW_DSTATE_CLDO_PRG_BIT 20 +#define FW_DSTATE_DF_PLL_PWRDN_BIT 21 +#define FW_DSTATE_U_LOW_PWR_MODE_EN_BIT 22 +#define FW_DSTATE_GFX_PSI6_BIT 23 +#define FW_DSTATE_GFX_VR_PWR_STAGE_BIT 24 + +//LED Display Mask & Control Bits +#define LED_DISPLAY_GFX_DPM_BIT 0 +#define LED_DISPLAY_PCIE_BIT 1 +#define LED_DISPLAY_ERROR_BIT 2 + + +#define MEM_TEMP_READ_OUT_OF_BAND_BIT 0 +#define MEM_TEMP_READ_IN_BAND_REFRESH_BIT 1 +#define MEM_TEMP_READ_IN_BAND_DUMMY_PSTATE_BIT 2 + +typedef enum { + SMARTSHIFT_VERSION_1, + SMARTSHIFT_VERSION_2, + SMARTSHIFT_VERSION_3, +} SMARTSHIFT_VERSION_e; + +typedef enum { + FOPT_CALC_AC_CALC_DC, + FOPT_PPTABLE_AC_CALC_DC, + FOPT_CALC_AC_PPTABLE_DC, + FOPT_PPTABLE_AC_PPTABLE_DC, +} FOPT_CALC_e; + +typedef enum { + DRAM_BIT_WIDTH_DISABLED = 0, + DRAM_BIT_WIDTH_X_8 = 8, + DRAM_BIT_WIDTH_X_16 = 16, + DRAM_BIT_WIDTH_X_32 = 32, + DRAM_BIT_WIDTH_X_64 = 64, + DRAM_BIT_WIDTH_X_128 = 128, + DRAM_BIT_WIDTH_COUNT, +} DRAM_BIT_WIDTH_TYPE_e; + +//I2C Interface +#define NUM_I2C_CONTROLLERS 8 + +#define I2C_CONTROLLER_ENABLED 1 +#define I2C_CONTROLLER_DISABLED 0 + +#define MAX_SW_I2C_COMMANDS 24 + +typedef enum { + I2C_CONTROLLER_PORT_0 = 0, //CKSVII2C0 + I2C_CONTROLLER_PORT_1 = 1, //CKSVII2C1 + I2C_CONTROLLER_PORT_COUNT, +} I2cControllerPort_e; + +typedef enum { + I2C_CONTROLLER_NAME_VR_GFX = 0, + I2C_CONTROLLER_NAME_VR_SOC, + I2C_CONTROLLER_NAME_VR_VMEMP, + I2C_CONTROLLER_NAME_VR_VDDIO, + I2C_CONTROLLER_NAME_LIQUID0, + I2C_CONTROLLER_NAME_LIQUID1, + I2C_CONTROLLER_NAME_PLX, + I2C_CONTROLLER_NAME_OTHER, + I2C_CONTROLLER_NAME_COUNT, +} I2cControllerName_e; + +typedef enum { + I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0, + I2C_CONTROLLER_THROTTLER_VR_GFX, + I2C_CONTROLLER_THROTTLER_VR_SOC, + I2C_CONTROLLER_THROTTLER_VR_VMEMP, + I2C_CONTROLLER_THROTTLER_VR_VDDIO, + I2C_CONTROLLER_THROTTLER_LIQUID0, + I2C_CONTROLLER_THROTTLER_LIQUID1, + I2C_CONTROLLER_THROTTLER_PLX, + I2C_CONTROLLER_THROTTLER_INA3221, + I2C_CONTROLLER_THROTTLER_COUNT, +} I2cControllerThrottler_e; + +typedef enum { + I2C_CONTROLLER_PROTOCOL_VR_XPDE132G5, + I2C_CONTROLLER_PROTOCOL_VR_IR35217, + I2C_CONTROLLER_PROTOCOL_TMP_TMP102A, + I2C_CONTROLLER_PROTOCOL_INA3221, + I2C_CONTROLLER_PROTOCOL_COUNT, +} I2cControllerProtocol_e; + +typedef struct { + uint8_t Enabled; + uint8_t Speed; + uint8_t SlaveAddress; + uint8_t ControllerPort; + uint8_t ControllerName; + uint8_t ThermalThrotter; + uint8_t I2cProtocol; + uint8_t PaddingConfig; +} I2cControllerConfig_t; + +typedef enum { + I2C_PORT_SVD_SCL = 0, + I2C_PORT_GPIO, +} I2cPort_e; + +typedef enum { + I2C_SPEED_FAST_50K = 0, //50 Kbits/s + I2C_SPEED_FAST_100K, //100 Kbits/s + I2C_SPEED_FAST_400K, //400 Kbits/s + I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode) + I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode) + I2C_SPEED_HIGH_2M, //2.3 Mbits/s + I2C_SPEED_COUNT, +} I2cSpeed_e; + +typedef enum { + I2C_CMD_READ = 0, + I2C_CMD_WRITE, + I2C_CMD_COUNT, +} I2cCmdType_e; + +#define CMDCONFIG_STOP_BIT 0 +#define CMDCONFIG_RESTART_BIT 1 +#define CMDCONFIG_READWRITE_BIT 2 //bit should be 0 for read, 1 for write + +#define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT) +#define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT) +#define CMDCONFIG_READWRITE_MASK (1 << CMDCONFIG_READWRITE_BIT) + +typedef struct { + uint8_t ReadWriteData; //Return data for read. Data to send for write + uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command, and is a read or write +} SwI2cCmd_t; //SW I2C Command Table + +typedef struct { + uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1) + uint8_t I2CSpeed; //Use I2cSpeed_e to indicate speed to select + uint8_t SlaveAddress; //Slave address of device + uint8_t NumCmds; //Number of commands + + SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS]; +} SwI2cRequest_t; // SW I2C Request Table + +typedef struct { + SwI2cRequest_t SwI2cRequest; + + uint32_t Spare[8]; + uint32_t MmHubPadding[8]; // SMU internal use +} SwI2cRequestExternal_t; + +typedef struct { + uint64_t mca_umc_status; + uint64_t mca_umc_addr; + + uint16_t ce_count_lo_chip; + uint16_t ce_count_hi_chip; + + uint32_t eccPadding; +} EccInfo_t; + +typedef struct { + EccInfo_t EccInfo[24]; +} EccInfoTable_t; + +//D3HOT sequences +typedef enum { + BACO_SEQUENCE, + MSR_SEQUENCE, + BAMACO_SEQUENCE, + ULPS_SEQUENCE, + D3HOT_SEQUENCE_COUNT, +} D3HOTSequence_e; + +//This is aligned with RSMU PGFSM Register Mapping +typedef enum { + PG_DYNAMIC_MODE = 0, + PG_STATIC_MODE, +} PowerGatingMode_e; + +//This is aligned with RSMU PGFSM Register Mapping +typedef enum { + PG_POWER_DOWN = 0, + PG_POWER_UP, +} PowerGatingSettings_e; + +typedef struct { + uint32_t a; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable + uint32_t c; // store in IEEE float format in this variable +} QuadraticInt_t; + +typedef struct { + uint32_t m; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable +} LinearInt_t; + +typedef struct { + uint32_t a; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable + uint32_t c; // store in IEEE float format in this variable +} DroopInt_t; + +typedef enum { + DCS_ARCH_DISABLED, + DCS_ARCH_FADCS, + DCS_ARCH_ASYNC, +} DCS_ARCH_e; + +//Only Clks that have DPM descriptors are listed here +typedef enum { + PPCLK_GFXCLK = 0, + PPCLK_SOCCLK, + PPCLK_UCLK, + PPCLK_FCLK, + PPCLK_DCLK_0, + PPCLK_VCLK_0, + PPCLK_DCLK_1, + PPCLK_VCLK_1, + PPCLK_DISPCLK, + PPCLK_DPPCLK, + PPCLK_DPREFCLK, + PPCLK_DCFCLK, + PPCLK_DTBCLK, + PPCLK_COUNT, +} PPCLK_e; + +typedef enum { + VOLTAGE_MODE_PPTABLE = 0, + VOLTAGE_MODE_FUSES, + VOLTAGE_MODE_COUNT, +} VOLTAGE_MODE_e; + + +typedef enum { + AVFS_VOLTAGE_GFX = 0, + AVFS_VOLTAGE_SOC, + AVFS_VOLTAGE_COUNT, +} AVFS_VOLTAGE_TYPE_e; + +typedef enum { + AVFS_TEMP_COLD = 0, + AVFS_TEMP_HOT, + AVFS_TEMP_COUNT, +} AVFS_TEMP_e; + +typedef enum { + AVFS_D_G, + AVFS_D_M_B, + AVFS_D_M_S, + AVFS_D_COUNT, +} AVFS_D_e; + +typedef enum { + UCLK_DIV_BY_1 = 0, + UCLK_DIV_BY_2, + UCLK_DIV_BY_4, + UCLK_DIV_BY_8, +} UCLK_DIV_e; + +typedef enum { + GPIO_INT_POLARITY_ACTIVE_LOW = 0, + GPIO_INT_POLARITY_ACTIVE_HIGH, +} GpioIntPolarity_e; + +typedef enum { + PWR_CONFIG_TDP = 0, + PWR_CONFIG_TGP, + PWR_CONFIG_TCP_ESTIMATED, + PWR_CONFIG_TCP_MEASURED, +} PwrConfig_e; + +typedef struct { + uint8_t Padding; + uint8_t SnapToDiscrete; // 0 - Fine grained DPM, 1 - Discrete DPM + uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used + uint8_t CalculateFopt; // Indication whether FW should calculate Fopt or use values below. Reference FOPT_CALC_e + LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz) + uint32_t Padding3[3]; + uint16_t Padding4; + uint16_t FoptimalDc; //Foptimal frequency in DC power mode. + uint16_t FoptimalAc; //Foptimal frequency in AC power mode. + uint16_t Padding2; +} DpmDescriptor_t; + +typedef enum { + PPT_THROTTLER_PPT0, + PPT_THROTTLER_PPT1, + PPT_THROTTLER_PPT2, + PPT_THROTTLER_PPT3, + PPT_THROTTLER_COUNT +} PPT_THROTTLER_e; + +typedef enum { + TEMP_EDGE, + TEMP_HOTSPOT, + TEMP_HOTSPOT_G, + TEMP_HOTSPOT_M, + TEMP_MEM, + TEMP_VR_GFX, + TEMP_VR_MEM0, + TEMP_VR_MEM1, + TEMP_VR_SOC, + TEMP_VR_U, + TEMP_LIQUID0, + TEMP_LIQUID1, + TEMP_PLX, + TEMP_COUNT, +} TEMP_e; + +typedef enum { + TDC_THROTTLER_GFX, + TDC_THROTTLER_SOC, + TDC_THROTTLER_U, + TDC_THROTTLER_COUNT +} TDC_THROTTLER_e; + +typedef enum { + SVI_PLANE_GFX, + SVI_PLANE_SOC, + SVI_PLANE_VMEMP, + SVI_PLANE_VDDIO_MEM, + SVI_PLANE_U, + SVI_PLANE_COUNT, +} SVI_PLANE_e; + +typedef enum { + PMFW_VOLT_PLANE_GFX, + PMFW_VOLT_PLANE_SOC, + PMFW_VOLT_PLANE_COUNT +} PMFW_VOLT_PLANE_e; + +typedef enum { + CUSTOMER_VARIANT_ROW, + CUSTOMER_VARIANT_FALCON, + CUSTOMER_VARIANT_COUNT, +} CUSTOMER_VARIANT_e; + +typedef enum { + POWER_SOURCE_AC, + POWER_SOURCE_DC, + POWER_SOURCE_COUNT, +} POWER_SOURCE_e; + +typedef enum { + MEM_VENDOR_SAMSUNG, + MEM_VENDOR_INFINEON, + MEM_VENDOR_ELPIDA, + MEM_VENDOR_ETRON, + MEM_VENDOR_NANYA, + MEM_VENDOR_HYNIX, + MEM_VENDOR_MOSEL, + MEM_VENDOR_WINBOND, + MEM_VENDOR_ESMT, + MEM_VENDOR_PLACEHOLDER0, + MEM_VENDOR_PLACEHOLDER1, + MEM_VENDOR_PLACEHOLDER2, + MEM_VENDOR_PLACEHOLDER3, + MEM_VENDOR_PLACEHOLDER4, + MEM_VENDOR_PLACEHOLDER5, + MEM_VENDOR_MICRON, + MEM_VENDOR_COUNT, +} MEM_VENDOR_e; + +typedef enum { + PP_GRTAVFS_HW_CPO_CTL_ZONE0, + PP_GRTAVFS_HW_CPO_CTL_ZONE1, + PP_GRTAVFS_HW_CPO_CTL_ZONE2, + PP_GRTAVFS_HW_CPO_CTL_ZONE3, + PP_GRTAVFS_HW_CPO_CTL_ZONE4, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE0, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE0, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE1, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE1, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE2, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE2, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE3, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE3, + PP_GRTAVFS_HW_CPO_EN_0_31_ZONE4, + PP_GRTAVFS_HW_CPO_EN_32_63_ZONE4, + PP_GRTAVFS_HW_ZONE0_VF, + PP_GRTAVFS_HW_ZONE1_VF1, + PP_GRTAVFS_HW_ZONE2_VF2, + PP_GRTAVFS_HW_ZONE3_VF3, + PP_GRTAVFS_HW_VOLTAGE_GB, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE0, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE1, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE2, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE3, + PP_GRTAVFS_HW_CPOSCALINGCTRL_ZONE4, + PP_GRTAVFS_HW_RESERVED_0, + PP_GRTAVFS_HW_RESERVED_1, + PP_GRTAVFS_HW_RESERVED_2, + PP_GRTAVFS_HW_RESERVED_3, + PP_GRTAVFS_HW_RESERVED_4, + PP_GRTAVFS_HW_RESERVED_5, + PP_GRTAVFS_HW_RESERVED_6, + PP_GRTAVFS_HW_FUSE_COUNT, +} PP_GRTAVFS_HW_FUSE_e; + +typedef enum { + PP_GRTAVFS_FW_COMMON_PPVMIN_Z1_HOT_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z1_COLD_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z2_HOT_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z2_COLD_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z3_HOT_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z3_COLD_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z4_HOT_T0, + PP_GRTAVFS_FW_COMMON_PPVMIN_Z4_COLD_T0, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z0, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z1, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z2, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z3, + PP_GRTAVFS_FW_COMMON_SRAM_RM_Z4, + PP_GRTAVFS_FW_COMMON_FUSE_COUNT, +} PP_GRTAVFS_FW_COMMON_FUSE_e; + +typedef enum { + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_NEG_1, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_0, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_1, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_2, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_3, + PP_GRTAVFS_FW_SEP_FUSE_GB1_PWL_VOLTAGE_4, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_NEG_1, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_0, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_1, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_2, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_3, + PP_GRTAVFS_FW_SEP_FUSE_GB2_PWL_VOLTAGE_4, + PP_GRTAVFS_FW_SEP_FUSE_VF_NEG_1_FREQUENCY, + PP_GRTAVFS_FW_SEP_FUSE_VF4_FREQUENCY, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_0, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_1, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_2, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_3, + PP_GRTAVFS_FW_SEP_FUSE_FREQUENCY_TO_COUNT_SCALER_4, + PP_GRTAVFS_FW_SEP_FUSE_COUNT, +} PP_GRTAVFS_FW_SEP_FUSE_e; + +#define PP_NUM_RTAVFS_PWL_ZONES 5 + + + +// VBIOS or PPLIB configures telemetry slope and offset. Only slope expected to be set for SVI3 +// Slope Q1.7, Offset Q1.2 +typedef struct { + int8_t Offset; // in Amps + uint8_t Padding; + uint16_t MaxCurrent; // in Amps +} SviTelemetryScale_t; + +#define PP_NUM_OD_VF_CURVE_POINTS PP_NUM_RTAVFS_PWL_ZONES + 1 + + +#define PP_OD_FEATURE_VF_CURVE_BIT 0 +#define PP_OD_FEATURE_VMAX_BIT 1 +#define PP_OD_FEATURE_PPT_BIT 2 +#define PP_OD_FEATURE_FAN_CURVE_BIT 3 +#define PP_OD_FEATURE_FREQ_DETER_BIT 4 +#define PP_OD_FEATURE_FULL_CTRL_BIT 5 +#define PP_OD_FEATURE_TDC_BIT 6 +#define PP_OD_FEATURE_GFXCLK_BIT 7 +#define PP_OD_FEATURE_UCLK_BIT 8 + +typedef enum { + PP_OD_POWER_FEATURE_ALWAYS_ENABLED, + PP_OD_POWER_FEATURE_DISABLED_WHILE_GAMING, + PP_OD_POWER_FEATURE_ALWAYS_DISABLED, +} PP_OD_POWER_FEATURE_e; + +typedef struct { + uint32_t FeatureCtrlMask; + + //Voltage control + int16_t VoltageOffsetPerZoneBoundary[PP_NUM_OD_VF_CURVE_POINTS]; + uint16_t VddGfxVmax; // in mV + + uint8_t IdlePwrSavingFeaturesCtrl; + uint8_t RuntimePwrSavingFeaturesCtrl; + + //Frequency changes + uint16_t GfxclkFmin; // MHz + uint16_t GfxclkFmax; // MHz + uint16_t UclkFmin; // MHz + uint16_t UclkFmax; // MHz + + //PPT + int16_t Ppt; // % + int16_t Tdc; + + //Fan control + uint8_t FanLinearPwmPoints[NUM_OD_FAN_MAX_POINTS]; + uint8_t FanLinearTempPoints[NUM_OD_FAN_MAX_POINTS]; + uint16_t FanMaximumRpm; + uint16_t FanMinimumPwm; + uint16_t FanAcousticLimitRpm; + uint16_t FanTargetTemperature; // Degree Celcius + uint8_t FanZeroRpmEnable; + uint8_t FanZeroRpmStopTemp; + uint8_t FanMode; + uint8_t Padding[1]; + + + uint32_t Spare[13]; + uint32_t MmHubPadding[8]; // SMU internal use. Adding here instead of external as a workaround +} OverDriveTable_t; + +typedef struct { + OverDriveTable_t OverDriveTable; + +} OverDriveTableExternal_t; + +typedef struct { + uint32_t FeatureCtrlMask; + + int16_t VoltageOffsetPerZoneBoundary; + uint16_t VddGfxVmax; // in mV + + uint8_t IdlePwrSavingFeaturesCtrl; + uint8_t RuntimePwrSavingFeaturesCtrl; + + uint16_t GfxclkFmin; // MHz + uint16_t GfxclkFmax; // MHz + uint16_t UclkFmin; // MHz + uint16_t UclkFmax; // MHz + + //PPT + int16_t Ppt; // % + int16_t Tdc; + + uint8_t FanLinearPwmPoints; + uint8_t FanLinearTempPoints; + uint16_t FanMaximumRpm; + uint16_t FanMinimumPwm; + uint16_t FanAcousticLimitRpm; + uint16_t FanTargetTemperature; // Degree Celcius + uint8_t FanZeroRpmEnable; + uint8_t FanZeroRpmStopTemp; + uint8_t FanMode; + uint8_t Padding[1]; + + + uint32_t Spare[13]; + +} OverDriveLimits_t; + + +typedef enum { + BOARD_GPIO_SMUIO_0, + BOARD_GPIO_SMUIO_1, + BOARD_GPIO_SMUIO_2, + BOARD_GPIO_SMUIO_3, + BOARD_GPIO_SMUIO_4, + BOARD_GPIO_SMUIO_5, + BOARD_GPIO_SMUIO_6, + BOARD_GPIO_SMUIO_7, + BOARD_GPIO_SMUIO_8, + BOARD_GPIO_SMUIO_9, + BOARD_GPIO_SMUIO_10, + BOARD_GPIO_SMUIO_11, + BOARD_GPIO_SMUIO_12, + BOARD_GPIO_SMUIO_13, + BOARD_GPIO_SMUIO_14, + BOARD_GPIO_SMUIO_15, + BOARD_GPIO_SMUIO_16, + BOARD_GPIO_SMUIO_17, + BOARD_GPIO_SMUIO_18, + BOARD_GPIO_SMUIO_19, + BOARD_GPIO_SMUIO_20, + BOARD_GPIO_SMUIO_21, + BOARD_GPIO_SMUIO_22, + BOARD_GPIO_SMUIO_23, + BOARD_GPIO_SMUIO_24, + BOARD_GPIO_SMUIO_25, + BOARD_GPIO_SMUIO_26, + BOARD_GPIO_SMUIO_27, + BOARD_GPIO_SMUIO_28, + BOARD_GPIO_SMUIO_29, + BOARD_GPIO_SMUIO_30, + BOARD_GPIO_SMUIO_31, + MAX_BOARD_GPIO_SMUIO_NUM, + BOARD_GPIO_DC_GEN_A, + BOARD_GPIO_DC_GEN_B, + BOARD_GPIO_DC_GEN_C, + BOARD_GPIO_DC_GEN_D, + BOARD_GPIO_DC_GEN_E, + BOARD_GPIO_DC_GEN_F, + BOARD_GPIO_DC_GEN_G, + BOARD_GPIO_DC_GENLK_CLK, + BOARD_GPIO_DC_GENLK_VSYNC, + BOARD_GPIO_DC_SWAPLOCK_A, + BOARD_GPIO_DC_SWAPLOCK_B, +} BOARD_GPIO_TYPE_e; + +#define INVALID_BOARD_GPIO 0xFF + + +typedef struct { + //PLL 0 + uint16_t InitGfxclk_bypass; + uint16_t InitSocclk; + uint16_t InitMp0clk; + uint16_t InitMpioclk; + uint16_t InitSmnclk; + uint16_t InitUcpclk; + uint16_t InitCsrclk; + //PLL 1 + + uint16_t InitDprefclk; + uint16_t InitDcfclk; + uint16_t InitDtbclk; + //PLL 2 + uint16_t InitDclk; //assume same DCLK/VCLK for both instances + uint16_t InitVclk; + // PLL 3 + uint16_t InitUsbdfsclk; + uint16_t InitMp1clk; + uint16_t InitLclk; + uint16_t InitBaco400clk_bypass; + uint16_t InitBaco1200clk_bypass; + uint16_t InitBaco700clk_bypass; + // PLL 4 + uint16_t InitFclk; + // PLL 5 + uint16_t InitGfxclk_clkb; + + //PLL 6 + uint8_t InitUclkDPMState; // =0,1,2,3, frequency from FreqTableUclk + + uint8_t Padding[3]; + + uint32_t InitVcoFreqPll0; + uint32_t InitVcoFreqPll1; + uint32_t InitVcoFreqPll2; + uint32_t InitVcoFreqPll3; + uint32_t InitVcoFreqPll4; + uint32_t InitVcoFreqPll5; + uint32_t InitVcoFreqPll6; + + //encoding will change depending on SVI2/SVI3 + uint16_t InitGfx; // In mV(Q2) , should be 0? + uint16_t InitSoc; // In mV(Q2) + uint16_t InitU; // In Mv(Q2) not applicable + + uint16_t Padding2; + + uint32_t Spare[8]; + +} BootValues_t; + + +typedef struct { + uint16_t Power[PPT_THROTTLER_COUNT][POWER_SOURCE_COUNT]; // Watts + uint16_t Tdc[TDC_THROTTLER_COUNT]; // Amps + + uint16_t Temperature[TEMP_COUNT]; // Celsius + + uint8_t PwmLimitMin; + uint8_t PwmLimitMax; + uint8_t FanTargetTemperature; + uint8_t Spare1[1]; + + uint16_t AcousticTargetRpmThresholdMin; + uint16_t AcousticTargetRpmThresholdMax; + + uint16_t AcousticLimitRpmThresholdMin; + uint16_t AcousticLimitRpmThresholdMax; + + uint16_t PccLimitMin; + uint16_t PccLimitMax; + + uint16_t FanStopTempMin; + uint16_t FanStopTempMax; + uint16_t FanStartTempMin; + uint16_t FanStartTempMax; + + uint32_t Spare[12]; + +} MsgLimits_t; + +typedef struct { + uint16_t BaseClockAc; + uint16_t GameClockAc; + uint16_t BoostClockAc; + uint16_t BaseClockDc; + uint16_t GameClockDc; + uint16_t BoostClockDc; + + uint32_t Reserved[4]; +} DriverReportedClocks_t; + +typedef struct { + uint8_t DcBtcEnabled; + uint8_t Padding[3]; + + uint16_t DcTol; // mV Q2 + uint16_t DcBtcGb; // mV Q2 + + uint16_t DcBtcMin; // mV Q2 + uint16_t DcBtcMax; // mV Q2 + + LinearInt_t DcBtcGbScalar; + +} AvfsDcBtcParams_t; + +typedef struct { + uint16_t AvfsTemp[AVFS_TEMP_COUNT]; //in degrees C + uint16_t VftFMin; // in MHz + uint16_t VInversion; // in mV Q2 + QuadraticInt_t qVft[AVFS_TEMP_COUNT]; + QuadraticInt_t qAvfsGb; + QuadraticInt_t qAvfsGb2; +} AvfsFuseOverride_t; + +typedef struct { + // SECTION: Version + + uint32_t Version; // should be unique to each SKU(i.e if any value changes in below structure then this value must be different) + + // SECTION: Feature Control + uint32_t FeaturesToRun[NUM_FEATURES / 32]; // Features that PMFW will attempt to enable. Use FEATURE_*_BIT as mapping + + // SECTION: Miscellaneous Configuration + uint8_t TotalPowerConfig; // Determines how PMFW calculates the power. Use defines from PwrConfig_e + uint8_t CustomerVariant; //To specify if this PPTable is intended for a particular customer. Use defines from CUSTOMER_VARIANT_e + uint8_t MemoryTemperatureTypeMask; // Bit mapping indicating which methods of memory temperature reading are enabled. Use defines from MEM_TEMP_*BIT + uint8_t SmartShiftVersion; // Determine what SmartShift feature version is supported Use defines from SMARTSHIFT_VERSION_e + + // SECTION: Infrastructure Limits + uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; // In Watts. Power limit that PMFW attempts to control to in AC mode. Multiple limits supported + uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT]; // In Watts. Power limit that PMFW attempts to control to in DC mode. Multiple limits supported + + uint16_t SocketPowerLimitSmartShift2; // In Watts. Power limit used SmartShift + + //if set to 1, SocketPowerLimitAc and SocketPowerLimitDc will be interpreted as legacy programs(i.e absolute power). If 0, all except index 0 will be scalars + //relative index 0 + uint8_t EnableLegacyPptLimit; + uint8_t UseInputTelemetry; //applicable to SVI3 only and only to be set if VRs support + uint8_t SmartShiftMinReportedPptinDcs; //minimum possible active power consumption for this SKU. Used for SmartShift power reporting + + uint8_t PaddingPpt[1]; + + uint16_t VrTdcLimit[TDC_THROTTLER_COUNT]; // In Amperes. Current limit associated with VR regulator maximum temperature + + uint16_t PlatformTdcLimit[TDC_THROTTLER_COUNT]; // In Amperes. Current limit associated with platform maximum temperature per VR current rail + + uint16_t TemperatureLimit[TEMP_COUNT]; // In degrees Celsius. Temperature limit associated with each input + + uint16_t HwCtfTempLimit; // In degrees Celsius. Temperature above which HW will trigger CTF. Consumed by VBIOS only + + uint16_t PaddingInfra; + + // Per year normalized Vmax state failure rates (sum of the two domains divided by life time in years) + uint32_t FitControllerFailureRateLimit; //in IEEE float + //Expected GFX Duty Cycle at Vmax. + uint32_t FitControllerGfxDutyCycle; // in IEEE float + //Expected SOC Duty Cycle at Vmax. + uint32_t FitControllerSocDutyCycle; // in IEEE float + + //This offset will be deducted from the controller output to before it goes through the SOC Vset limiter block. + uint32_t FitControllerSocOffset; //in IEEE float + + uint32_t GfxApccPlusResidencyLimit; // Percentage value. Used by APCC+ controller to control PCC residency to some value + + // SECTION: Throttler settings + uint32_t ThrottlerControlMask; // See THROTTLER_*_BIT for mapping + + // SECTION: FW DSTATE Settings + uint32_t FwDStateMask; // See FW_DSTATE_*_BIT for mapping + + // SECTION: Voltage Control Parameters + uint16_t UlvVoltageOffset[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2). ULV offset used in either GFX_ULV or SOC_ULV(part of FW_DSTATE) + + uint16_t UlvVoltageOffsetU; // In mV(Q2). ULV offset used in either U_ULV(part of FW_DSTATE) + uint16_t DeepUlvVoltageOffsetSoc; // In mV(Q2) Long Idle Vmin (deep ULV), for VDD_SOC as part of FW_DSTATE + + // Voltage Limits + uint16_t DefaultMaxVoltage[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2) Maximum voltage without FIT controller enabled + uint16_t BoostMaxVoltage[PMFW_VOLT_PLANE_COUNT]; // In mV(Q2) Maximum voltage with FIT controller enabled + + //Vmin Optimizations + int16_t VminTempHystersis[PMFW_VOLT_PLANE_COUNT]; // Celsius Temperature hysteresis for switching between low/high temperature values for Vmin + int16_t VminTempThreshold[PMFW_VOLT_PLANE_COUNT]; // Celsius Temperature threshold for switching between low/high temperature values for Vmin + uint16_t Vmin_Hot_T0[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Initial (pre-aging) Vset to be used at hot. + uint16_t Vmin_Cold_T0[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Initial (pre-aging) Vset to be used at cold. + uint16_t Vmin_Hot_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at hot. + uint16_t Vmin_Cold_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at cold. + uint16_t Vmin_Aging_Offset[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Worst-case aging margin + uint16_t Vmin_Plat_Offset_Hot[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Hot + uint16_t Vmin_Plat_Offset_Cold[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Cold + + //This is a fixed/minimum VMIN aging degradation offset which is applied at T0. This reflects the minimum amount of aging already accounted for. + uint16_t VcBtcFixedVminAgingOffset[PMFW_VOLT_PLANE_COUNT]; + //Linear offset or GB term to account for mis-correlation between PSM and Vmin shift trends across parts. + uint16_t VcBtcVmin2PsmDegrationGb[PMFW_VOLT_PLANE_COUNT]; + //Scalar coefficient of the PSM aging degradation function + uint32_t VcBtcPsmA[PMFW_VOLT_PLANE_COUNT]; // A_PSM + //Exponential coefficient of the PSM aging degradation function + uint32_t VcBtcPsmB[PMFW_VOLT_PLANE_COUNT]; // B_PSM + //Scalar coefficient of the VMIN aging degradation function. Specified as worst case between hot and cold. + uint32_t VcBtcVminA[PMFW_VOLT_PLANE_COUNT]; // A_VMIN + //Exponential coefficient of the VMIN aging degradation function. Specified as worst case between hot and cold. + uint32_t VcBtcVminB[PMFW_VOLT_PLANE_COUNT]; // B_VMIN + + uint8_t PerPartVminEnabled[PMFW_VOLT_PLANE_COUNT]; + uint8_t VcBtcEnabled[PMFW_VOLT_PLANE_COUNT]; + + uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms + uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; // Time constant of LPF in ms + + uint32_t SpareVmin[12]; + + + //SECTION: DPM Configuration 1 + DpmDescriptor_t DpmDescriptor[PPCLK_COUNT]; + + uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDppClk [NUM_DPPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDprefclk [NUM_DPREFCLK_DPM_LEVELS]; // In MHz + uint16_t FreqTableDcfclk [NUM_DCFCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDtbclk [NUM_DTBCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz + + uint32_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz + + // SECTION: DPM Configuration 2 + uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz + uint16_t Mp0DpmVoltage [NUM_MP0CLK_DPM_LEVELS]; // mV(Q2) + + uint8_t GfxclkSpare[2]; + uint16_t GfxclkFreqCap; + + //GFX Idle Power Settings + uint16_t GfxclkFgfxoffEntry; // in Mhz + uint16_t GfxclkFgfxoffExitImu; // in Mhz + uint16_t GfxclkFgfxoffExitRlc; // in Mhz + uint16_t GfxclkThrottleClock; //Used primarily in DCS + uint8_t EnableGfxPowerStagesGpio; //Genlk_vsync GPIO flag used to control gfx power stages + uint8_t GfxIdlePadding; + + uint8_t SmsRepairWRCKClkDivEn; + uint8_t SmsRepairWRCKClkDivVal; + uint8_t GfxOffEntryEarlyMGCGEn; + uint8_t GfxOffEntryForceCGCGEn; + uint8_t GfxOffEntryForceCGCGDelayEn; + uint8_t GfxOffEntryForceCGCGDelayVal; // in microseconds + + uint16_t GfxclkFreqGfxUlv; // in MHz + uint8_t GfxIdlePadding2[2]; + + uint32_t GfxoffSpare[16]; + + // GFX GPO + uint32_t GfxGpoSpare[16]; + + // GFX DCS + + uint16_t DcsGfxOffVoltage; //Voltage in mV(Q2) applied to VDDGFX when entering DCS GFXOFF phase + uint16_t PaddingDcs; + + uint16_t DcsMinGfxOffTime; //Minimum amount of time PMFW shuts GFX OFF as part of GFX DCS phase + uint16_t DcsMaxGfxOffTime; //Maximum amount of time PMFW can shut GFX OFF as part of GFX DCS phase at a stretch. + + uint32_t DcsMinCreditAccum; //Min amount of positive credit accumulation before waking GFX up as part of DCS. + + uint16_t DcsExitHysteresis; //The min amount of time power credit accumulator should have a value > 0 before SMU exits the DCS throttling phase. + uint16_t DcsTimeout; //This is the amount of time SMU FW waits for RLC to put GFX into GFXOFF before reverting to the fallback mechanism of throttling GFXCLK to Fmin. + + + uint32_t DcsSpare[16]; + + // UCLK section + uint8_t UseStrobeModeOptimizations; //Set to indicate that FW should use strobe mode optimizations + uint8_t PaddingMem[3]; + + uint8_t UclkDpmPstates [NUM_UCLK_DPM_LEVELS]; // 4 DPM states, 0-P0, 1-P1, 2-P2, 3-P3. + uint8_t FreqTableUclkDiv [NUM_UCLK_DPM_LEVELS ]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8 + + uint16_t MemVmempVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + uint16_t MemVddioVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + + //FCLK Section + + uint8_t FclkDpmUPstates[NUM_FCLK_DPM_LEVELS]; // U P-state ID associated with each FCLK DPM state. + uint16_t FclkDpmVddU[NUM_FCLK_DPM_LEVELS]; // mV(Q2) Vset U voltage associated with each FCLK DPM state. + uint16_t FclkDpmUSpeed[NUM_FCLK_DPM_LEVELS]; //U speed associated with each FCLK DPM state + uint16_t FclkDpmDisallowPstateFreq; //Frequency which FW will target when indicated that display config cannot support P-state. Set to 0 use FW calculated value + uint16_t PaddingFclk; + + // Link DPM Settings + uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4 + uint8_t PcieLaneCount[NUM_LINK_LEVELS]; ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16 + uint16_t LclkFreq[NUM_LINK_LEVELS]; + + // SECTION: Fan Control + uint16_t FanStopTemp[TEMP_COUNT]; //Celsius + uint16_t FanStartTemp[TEMP_COUNT]; //Celsius + + uint16_t FanGain[TEMP_COUNT]; + uint16_t FanGainPadding; + + uint16_t FanPwmMin; + uint16_t AcousticTargetRpmThreshold; + uint16_t AcousticLimitRpmThreshold; + uint16_t FanMaximumRpm; + uint16_t MGpuAcousticLimitRpmThreshold; + uint16_t FanTargetGfxclk; + uint32_t TempInputSelectMask; + uint8_t FanZeroRpmEnable; + uint8_t FanTachEdgePerRev; + uint16_t FanTargetTemperature[TEMP_COUNT]; + + // The following are AFC override parameters. Leave at 0 to use FW defaults. + int16_t FuzzyFan_ErrorSetDelta; + int16_t FuzzyFan_ErrorRateSetDelta; + int16_t FuzzyFan_PwmSetDelta; + uint16_t FuzzyFan_Reserved; + + uint16_t FwCtfLimit[TEMP_COUNT]; + + uint16_t IntakeTempEnableRPM; + int16_t IntakeTempOffsetTemp; + uint16_t IntakeTempReleaseTemp; + uint16_t IntakeTempHighIntakeAcousticLimit; + uint16_t IntakeTempAcouticLimitReleaseRate; + + uint16_t FanStalledTempLimitOffset; + uint16_t FanStalledTriggerRpm; + uint16_t FanAbnormalTriggerRpm; + uint16_t FanPadding; + + uint32_t FanSpare[14]; + + // SECTION: VDD_GFX AVFS + + uint8_t OverrideGfxAvfsFuses; + uint8_t GfxAvfsPadding[3]; + + uint32_t L2HwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; //see fusedoc for encoding + uint32_t SeHwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; + + uint32_t CommonRtAvfs[PP_GRTAVFS_FW_COMMON_FUSE_COUNT]; + + uint32_t L2FwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT]; + uint32_t SeFwRtAvfsFuses[PP_GRTAVFS_FW_SEP_FUSE_COUNT]; + + uint32_t Droop_PWL_F[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Droop_PWL_a[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Droop_PWL_b[PP_NUM_RTAVFS_PWL_ZONES]; + uint32_t Droop_PWL_c[PP_NUM_RTAVFS_PWL_ZONES]; + + uint32_t Static_PWL_Offset[PP_NUM_RTAVFS_PWL_ZONES]; + + uint32_t dGbV_dT_vmin; + uint32_t dGbV_dT_vmax; + + //Unused: PMFW-9370 + uint32_t V2F_vmin_range_low; + uint32_t V2F_vmin_range_high; + uint32_t V2F_vmax_range_low; + uint32_t V2F_vmax_range_high; + + AvfsDcBtcParams_t DcBtcGfxParams; + + uint32_t GfxAvfsSpare[32]; + + //SECTION: VDD_SOC AVFS + + uint8_t OverrideSocAvfsFuses; + uint8_t MinSocAvfsRevision; + uint8_t SocAvfsPadding[2]; + + AvfsFuseOverride_t SocAvfsFuseOverride[AVFS_D_COUNT]; + + DroopInt_t dBtcGbSoc[AVFS_D_COUNT]; // GHz->V BtcGb + + LinearInt_t qAgingGb[AVFS_D_COUNT]; // GHz->V + + QuadraticInt_t qStaticVoltageOffset[AVFS_D_COUNT]; // GHz->V + + AvfsDcBtcParams_t DcBtcSocParams[AVFS_D_COUNT]; + + uint32_t SocAvfsSpare[32]; + + //SECTION: Boot clock and voltage values + BootValues_t BootValues; + + //SECTION: Driver Reported Clocks + DriverReportedClocks_t DriverReportedClocks; + + //SECTION: Message Limits + MsgLimits_t MsgLimits; + + //SECTION: OverDrive Limits + OverDriveLimits_t OverDriveLimitsMin; + OverDriveLimits_t OverDriveLimitsBasicMax; + OverDriveLimits_t OverDriveLimitsAdvancedMax; + + // SECTION: Advanced Options + uint32_t DebugOverrides; + + // SECTION: Sku Reserved + uint32_t Spare[64]; + + // Padding for MMHUB - do not modify this + uint32_t MmHubPadding[8]; + +} SkuTable_t; + +typedef struct { + // SECTION: Version + uint32_t Version; //should be unique to each board type + + + // SECTION: I2C Control + I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS]; + + // SECTION: SVI2 Board Parameters + uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields + + uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t VmempUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t VddioUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + + //SECTION SVI3 Board Parameters + uint8_t SlaveAddrMapping[SVI_PLANE_COUNT]; + uint8_t VrPsiSupport[SVI_PLANE_COUNT]; + + uint8_t PaddingPsi[SVI_PLANE_COUNT]; + uint8_t EnablePsi6[SVI_PLANE_COUNT]; // only applicable in SVI3 + + // SECTION: Voltage Regulator Settings + SviTelemetryScale_t SviTelemetryScale[SVI_PLANE_COUNT]; + uint32_t VoltageTelemetryRatio[SVI_PLANE_COUNT]; // This is used for VDDIO Svi2 Div Ratio workaround. It has 16 fractional bits (Q16.16) + + uint8_t DownSlewRateVr[SVI_PLANE_COUNT]; + + // SECTION: GPIO Settings + + uint8_t LedOffGpio; + uint8_t FanOffGpio; + uint8_t GfxVrPowerStageOffGpio; + + uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching + uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching + uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event + uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event + + uint8_t GthrGpio; // GPIO pin configured for GTHR Event + uint8_t GthrPolarity; // replace GPIO polarity for GTHR + + // LED Display Settings + uint8_t LedPin0; // GPIO number for LedPin[0] + uint8_t LedPin1; // GPIO number for LedPin[1] + uint8_t LedPin2; // GPIO number for LedPin[2] + uint8_t LedEnableMask; + + uint8_t LedPcie; // GPIO number for PCIE results + uint8_t LedError; // GPIO number for Error Cases + + // SECTION: Clock Spread Spectrum + + // UCLK Spread Spectrum + uint16_t UclkSpreadPadding; + uint16_t UclkSpreadFreq; // kHz + + // UCLK Spread Spectrum + uint8_t UclkSpreadPercent[MEM_VENDOR_COUNT]; + + // FCLK Spread Spectrum + uint8_t FclkSpreadPadding; + uint8_t FclkSpreadPercent; // Q4.4 + uint16_t FclkSpreadFreq; // kHz + + // Section: Memory Config + uint8_t DramWidth; // Width of interface to the channel for each DRAM module. See DRAM_BIT_WIDTH_TYPE_e + uint8_t PaddingMem1[3]; + + // Section: Total Board Power + uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power + uint16_t BoardPowerPadding; + + // SECTION: UMC feature flags + uint8_t HsrEnabled; + uint8_t VddqOffEnabled; + uint8_t PaddingUmcFlags[2]; + + uint32_t PostVoltageSetBacoDelay; // in microseconds. Amount of time FW will wait after power good is established or PSI0 command is issued + uint32_t BacoEntryDelay; // in milliseconds. Amount of time FW will wait to trigger BACO entry after receiving entry notification from OS + + + // SECTION: Board Reserved + uint32_t BoardSpare[64]; + + // SECTION: Structure Padding + + // Padding for MMHUB - do not modify this + uint32_t MmHubPadding[8]; +} BoardTable_t; + +typedef struct { + SkuTable_t SkuTable; + BoardTable_t BoardTable; +} PPTable_t; + +typedef struct { + // Time constant parameters for clock averages in ms + uint16_t GfxclkAverageLpfTau; + uint16_t FclkAverageLpfTau; + uint16_t UclkAverageLpfTau; + uint16_t GfxActivityLpfTau; + uint16_t UclkActivityLpfTau; + uint16_t SocketPowerLpfTau; + uint16_t VcnClkAverageLpfTau; + uint16_t VcnUsageAverageLpfTau; +} DriverSmuConfig_t; + +typedef struct { + DriverSmuConfig_t DriverSmuConfig; + + uint32_t Spare[8]; + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use +} DriverSmuConfigExternal_t; + + +typedef struct { + + uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDppClk [NUM_DPPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDprefclk [NUM_DPREFCLK_DPM_LEVELS]; // In MHz + uint16_t FreqTableDcfclk [NUM_DCFCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDtbclk [NUM_DTBCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz + + uint16_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz + + uint16_t Padding; + + uint32_t Spare[32]; + + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use + +} DriverInfoTable_t; + +typedef struct { + uint32_t CurrClock[PPCLK_COUNT]; + + uint16_t AverageGfxclkFrequencyTarget; + uint16_t AverageGfxclkFrequencyPreDs; + uint16_t AverageGfxclkFrequencyPostDs; + uint16_t AverageFclkFrequencyPreDs; + uint16_t AverageFclkFrequencyPostDs; + uint16_t AverageMemclkFrequencyPreDs ; // this is scaled to actual memory clock + uint16_t AverageMemclkFrequencyPostDs ; // this is scaled to actual memory clock + uint16_t AverageVclk0Frequency ; + uint16_t AverageDclk0Frequency ; + uint16_t AverageVclk1Frequency ; + uint16_t AverageDclk1Frequency ; + + uint16_t AvgVoltage[SVI_PLANE_COUNT]; + + uint16_t AverageGfxActivity ; + uint16_t AverageUclkActivity ; + uint16_t Vcn0ActivityPercentage ; + uint16_t Vcn1ActivityPercentage ; + + uint32_t EnergyAccumulator; + uint16_t AverageSocketPower ; + uint16_t AvgTemperature[TEMP_COUNT]; + + uint8_t PcieRate ; + uint8_t PcieWidth ; + + uint8_t AvgFanPwm; + uint8_t Padding[1]; + uint16_t AvgFanRpm; + + + uint8_t ThrottlingPercentage[THROTTLER_COUNT]; + + //metrics for D3hot entry/exit and driver ARM msgs + uint32_t D3HotEntryCountPerMode[D3HOT_SEQUENCE_COUNT]; + uint32_t D3HotExitCountPerMode[D3HOT_SEQUENCE_COUNT]; + uint32_t ArmMsgReceivedCountPerMode[D3HOT_SEQUENCE_COUNT]; + + uint16_t ApuSTAPMSmartShiftLimit; + uint16_t ApuSTAPMLimit; + uint16_t AvgApuSocketPower; + + uint16_t AverageUclkActivity_MAX; + +} SmuMetrics_t; + +typedef struct { + SmuMetrics_t SmuMetrics; + uint32_t Spare[32]; + + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use +} SmuMetricsExternal_t; + +typedef struct { + uint8_t WmSetting; + uint8_t Flags; + uint8_t Padding[2]; + +} WatermarkRowGeneric_t; + +#define NUM_WM_RANGES 4 + +typedef enum { + WATERMARKS_CLOCK_RANGE = 0, + WATERMARKS_DUMMY_PSTATE, + WATERMARKS_MALL, + WATERMARKS_COUNT, +} WATERMARKS_FLAGS_e; + +typedef struct { + // Watermarks + WatermarkRowGeneric_t WatermarkRow[NUM_WM_RANGES]; +} Watermarks_t; + +typedef struct { + Watermarks_t Watermarks; + uint32_t Spare[16]; + + uint32_t MmHubPadding[8]; // SMU internal use +} WatermarksExternal_t; + +typedef struct { + uint16_t avgPsmCount[36]; + uint16_t minPsmCount[36]; + float avgPsmVoltage[36]; + float minPsmVoltage[36]; +} AvfsDebugTable_t; + +typedef struct { + AvfsDebugTable_t AvfsDebugTable; + + uint32_t MmHubPadding[8]; // SMU internal use +} AvfsDebugTableExternal_t; + + +typedef struct { + uint8_t Gfx_ActiveHystLimit; + uint8_t Gfx_IdleHystLimit; + uint8_t Gfx_FPS; + uint8_t Gfx_MinActiveFreqType; + uint8_t Gfx_BoosterFreqType; + uint8_t PaddingGfx; + uint16_t Gfx_MinActiveFreq; // MHz + uint16_t Gfx_BoosterFreq; // MHz + uint16_t Gfx_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Gfx_PD_Data_limit_a; // Q16 + uint32_t Gfx_PD_Data_limit_b; // Q16 + uint32_t Gfx_PD_Data_limit_c; // Q16 + uint32_t Gfx_PD_Data_error_coeff; // Q16 + uint32_t Gfx_PD_Data_error_rate_coeff; // Q16 + + uint8_t Fclk_ActiveHystLimit; + uint8_t Fclk_IdleHystLimit; + uint8_t Fclk_FPS; + uint8_t Fclk_MinActiveFreqType; + uint8_t Fclk_BoosterFreqType; + uint8_t PaddingFclk; + uint16_t Fclk_MinActiveFreq; // MHz + uint16_t Fclk_BoosterFreq; // MHz + uint16_t Fclk_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Fclk_PD_Data_limit_a; // Q16 + uint32_t Fclk_PD_Data_limit_b; // Q16 + uint32_t Fclk_PD_Data_limit_c; // Q16 + uint32_t Fclk_PD_Data_error_coeff; // Q16 + uint32_t Fclk_PD_Data_error_rate_coeff; // Q16 + + uint32_t Mem_UpThreshold_Limit[NUM_UCLK_DPM_LEVELS]; // Q16 + uint8_t Mem_UpHystLimit[NUM_UCLK_DPM_LEVELS]; + uint8_t Mem_DownHystLimit[NUM_UCLK_DPM_LEVELS]; + uint16_t Mem_Fps; + uint8_t padding[2]; + +} DpmActivityMonitorCoeffInt_t; + + +typedef struct { + DpmActivityMonitorCoeffInt_t DpmActivityMonitorCoeffInt; + uint32_t MmHubPadding[8]; // SMU internal use +} DpmActivityMonitorCoeffIntExternal_t; + + + +// Workload bits +#define WORKLOAD_PPLIB_DEFAULT_BIT 0 +#define WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT 1 +#define WORKLOAD_PPLIB_POWER_SAVING_BIT 2 +#define WORKLOAD_PPLIB_VIDEO_BIT 3 +#define WORKLOAD_PPLIB_VR_BIT 4 +#define WORKLOAD_PPLIB_COMPUTE_BIT 5 +#define WORKLOAD_PPLIB_CUSTOM_BIT 6 +#define WORKLOAD_PPLIB_WINDOW_3D_BIT 7 +#define WORKLOAD_PPLIB_COUNT 8 + + +// These defines are used with the following messages: +// SMC_MSG_TransferTableDram2Smu +// SMC_MSG_TransferTableSmu2Dram + +// Table transfer status +#define TABLE_TRANSFER_OK 0x0 +#define TABLE_TRANSFER_FAILED 0xFF +#define TABLE_TRANSFER_PENDING 0xAB + +// Table types +#define TABLE_PPTABLE 0 +#define TABLE_COMBO_PPTABLE 1 +#define TABLE_WATERMARKS 2 +#define TABLE_AVFS_PSM_DEBUG 3 +#define TABLE_PMSTATUSLOG 4 +#define TABLE_SMU_METRICS 5 +#define TABLE_DRIVER_SMU_CONFIG 6 +#define TABLE_ACTIVITY_MONITOR_COEFF 7 +#define TABLE_OVERDRIVE 8 +#define TABLE_I2C_COMMANDS 9 +#define TABLE_DRIVER_INFO 10 +#define TABLE_ECCINFO 11 +#define TABLE_COUNT 12 + +//IH Interupt ID +#define IH_INTERRUPT_ID_TO_DRIVER 0xFE +#define IH_INTERRUPT_CONTEXT_ID_BACO 0x2 +#define IH_INTERRUPT_CONTEXT_ID_AC 0x3 +#define IH_INTERRUPT_CONTEXT_ID_DC 0x4 +#define IH_INTERRUPT_CONTEXT_ID_AUDIO_D0 0x5 +#define IH_INTERRUPT_CONTEXT_ID_AUDIO_D3 0x6 +#define IH_INTERRUPT_CONTEXT_ID_THERMAL_THROTTLING 0x7 + +#endif |