diff options
Diffstat (limited to 'drivers/ata/pata_sil680.c')
| -rw-r--r-- | drivers/ata/pata_sil680.c | 46 |
1 files changed, 20 insertions, 26 deletions
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index c14071be4f55..67ef2e26d7df 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -47,16 +47,15 @@ * criticial. */ -static unsigned long sil680_selreg(struct ata_port *ap, int r) +static int sil680_selreg(struct ata_port *ap, int r) { - unsigned long base = 0xA0 + r; - base += (ap->port_no << 4); - return base; + return 0xA0 + (ap->port_no << 4) + r; } /** * sil680_seldev - return register base * @ap: ATA interface + * @adev: ATA device * @r: config offset * * Turn a config register offset into the right address in PCI space @@ -64,12 +63,9 @@ static unsigned long sil680_selreg(struct ata_port *ap, int r) * the unit shift. */ -static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r) +static int sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r) { - unsigned long base = 0xA0 + r; - base += (ap->port_no << 4); - base |= adev->devno ? 2 : 0; - return base; + return 0xA0 + (ap->port_no << 4) + r + (adev->devno << 1); } @@ -84,8 +80,9 @@ static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, static int sil680_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - unsigned long addr = sil680_selreg(ap, 0); + int addr = sil680_selreg(ap, 0); u8 ata66; + pci_read_config_byte(pdev, addr, &ata66); if (ata66 & 1) return ATA_CBL_PATA80; @@ -112,9 +109,9 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev) 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 }; - unsigned long tfaddr = sil680_selreg(ap, 0x02); - unsigned long addr = sil680_seldev(ap, adev, 0x04); - unsigned long addr_mask = 0x80 + 4 * ap->port_no; + int tfaddr = sil680_selreg(ap, 0x02); + int addr = sil680_seldev(ap, adev, 0x04); + int addr_mask = 0x80 + 4 * ap->port_no; struct pci_dev *pdev = to_pci_dev(ap->host->dev); int pio = adev->pio_mode - XFER_PIO_0; int lowest_pio = pio; @@ -164,9 +161,9 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - unsigned long ma = sil680_seldev(ap, adev, 0x08); - unsigned long ua = sil680_seldev(ap, adev, 0x0C); - unsigned long addr_mask = 0x80 + 4 * ap->port_no; + int ma = sil680_seldev(ap, adev, 0x08); + int ua = sil680_seldev(ap, adev, 0x0C); + int addr_mask = 0x80 + 4 * ap->port_no; int port_shift = adev->devno * 4; u8 scsc, mode; u16 multi, ultra; @@ -211,7 +208,6 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) static void sil680_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { - DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); iowrite8(tf->command, ap->ioaddr.command_addr); ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); } @@ -219,7 +215,7 @@ static void sil680_sff_exec_command(struct ata_port *ap, static bool sil680_sff_irq_check(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - unsigned long addr = sil680_selreg(ap, 1); + int addr = sil680_selreg(ap, 1); u8 val; pci_read_config_byte(pdev, addr, &val); @@ -244,6 +240,7 @@ static struct ata_port_operations sil680_port_ops = { /** * sil680_init_chip - chip setup * @pdev: PCI device + * @try_mmio: Indicates to caller whether MMIO should be attempted * * Perform all the chip setup which must be done both when the device * is powered up on boot and when we resume in case we resumed from RAM. @@ -307,17 +304,17 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio) switch (tmpbyte & 0x30) { case 0x00: - printk(KERN_INFO "sil680: 100MHz clock.\n"); + dev_info(&pdev->dev, "sil680: 100MHz clock.\n"); break; case 0x10: - printk(KERN_INFO "sil680: 133MHz clock.\n"); + dev_info(&pdev->dev, "sil680: 133MHz clock.\n"); break; case 0x20: - printk(KERN_INFO "sil680: Using PCI clock.\n"); + dev_info(&pdev->dev, "sil680: Using PCI clock.\n"); break; /* This last case is _NOT_ ok */ case 0x30: - printk(KERN_ERR "sil680: Clock disabled ?\n"); + dev_err(&pdev->dev, "sil680: Clock disabled ?\n"); } return tmpbyte & 0x30; } @@ -374,10 +371,7 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) host->iomap = pcim_iomap_table(pdev); /* Setup DMA masks */ - rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); - if (rc) - return rc; - rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); + rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK); if (rc) return rc; pci_set_master(pdev); |