diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed-ast2600-evb.dts')
| -rw-r--r-- | arch/arm/boot/dts/aspeed-ast2600-evb.dts | 337 |
1 files changed, 337 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts new file mode 100644 index 000000000000..5a6063bd4508 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "AST2600 EVB"; + compatible = "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + vcc_sdhci0: regulator-vcc-sdhci0 { + compatible = "regulator-fixed"; + regulator-name = "SDHCI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhci0: regulator-vccq-sdhci0 { + compatible = "regulator-gpio"; + regulator-name = "SDHCI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, + <1800000 0>; + }; + + vcc_sdhci1: regulator-vcc-sdhci1 { + compatible = "regulator-fixed"; + regulator-name = "SDHCI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhci1: regulator-vccq-sdhci1 { + compatible = "regulator-gpio"; + regulator-name = "SDHCI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, + <1800000 0>; + }; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mdio1 { + status = "okay"; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mdio2 { + status = "okay"; + + ethphy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mdio3 { + status = "okay"; + + ethphy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac0 { + status = "okay"; + + phy-mode = "rgmii-rxid"; + phy-handle = <ðphy0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + + +&mac1 { + status = "okay"; + + phy-mode = "rgmii-rxid"; + phy-handle = <ðphy1>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default>; +}; + +&mac2 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; +}; + +&mac3 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii4_default>; +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + non-removable; + bus-width = <4>; + max-frequency = <100000000>; + clk-phase-mmc-hs200 = <9>, <225>; +}; + +&rtc { + status = "okay"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&uart5 { + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&i2c0 { + status = "okay"; + + temp@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&fsim0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&sdc { + status = "okay"; +}; + +/* + * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be + * toggled by GPIO pins. + * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the + * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to + * a 1.8v and a 3.3v power load switch that provides signal voltage to + * sdhci0 bus. + * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled. + * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal + * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled, + * sdhci0 signal voltage becomes 1.8v. + * AST2600-A2 EVB also supports toggling signal voltage for sdhci1. + * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3 + * as power-switch-gpio. + */ +&sdhci0 { + status = "okay"; + bus-width = <4>; + max-frequency = <100000000>; + sdhci-drive-type = /bits/ 8 <3>; + sdhci-caps-mask = <0x7 0x0>; + sdhci,wp-inverted; + vmmc-supply = <&vcc_sdhci0>; + vqmmc-supply = <&vccq_sdhci0>; + clk-phase-sd-hs = <7>, <200>; +}; + +&sdhci1 { + status = "okay"; + bus-width = <4>; + max-frequency = <100000000>; + sdhci-drive-type = /bits/ 8 <3>; + sdhci-caps-mask = <0x7 0x0>; + sdhci,wp-inverted; + vmmc-supply = <&vcc_sdhci1>; + vqmmc-supply = <&vccq_sdhci1>; + clk-phase-sd-hs = <7>, <200>; +}; + +&vhub { + status = "okay"; + pinctrl-names = "default"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; |