diff options
Diffstat (limited to 'arch/arm/boot/dts/am3517-evm.dts')
| -rw-r--r-- | arch/arm/boot/dts/am3517-evm.dts | 73 |
1 files changed, 47 insertions, 26 deletions
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index ebfe28c2f544..c8b80f156ec9 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -124,10 +124,11 @@ }; lcd0: display@0 { - compatible = "panel-dpi"; + /* This isn't the exact LCD, but the timings meet spec */ + /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ + compatible = "newhaven,nhd-4.3-480272ef-atxl"; label = "15"; - status = "okay"; - pinctrl-names = "default"; + backlight = <&bl>; enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ vcc-supply = <&vdd_io_reg>; @@ -136,22 +137,6 @@ remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <4>; - vsync-len = <11>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; }; bl: backlight { @@ -171,10 +156,13 @@ pinctrl-0 = <&pwm_pins>; ti,timers = <&timer11>; #pwm-cells = <3>; + ti,clock-source = <0x01>; }; /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ #phy-cells = <0>; @@ -182,7 +170,9 @@ }; &davinci_emac { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + status = "okay"; }; &davinci_mdio { @@ -190,7 +180,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins>; @@ -207,6 +197,8 @@ }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; /* User DIP swithes [1:8] / User LEDS [1:2] */ tca6416: gpio@21 { @@ -219,6 +211,8 @@ }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; @@ -237,6 +231,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; port1-mode = "ehci-phy"; }; @@ -245,8 +241,35 @@ }; &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_rst_pins>; + + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ + OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ + OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ + OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ + OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ + OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ + OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ + OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ + OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -314,8 +337,6 @@ }; &omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_pins>; hsusb1_pins: pinmux_hsusb1_pins { pinctrl-single,pins = < |