scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled

When enabled for both SCSI and NVME support, and connected pt2pt to a
SCSI only target, the driver nodelist entry for the remote port is left
in PRLI_ISSUE state and no SCSI LUNs are discovered. Works fine if only
configured for SCSI support.

Error was due to some of the prli points still reflecting the need to
send only 1 PRLI. On a lot of fabric configs, targets were NVME only,
which meant the fabric-reported protocol attributes were only telling
the driver one protocol or the other. Thus things worked fine. With
pt2pt, the driver must send a PRLI for both protocols as there are no
hints on what the target supports. Thus pt2pt targets were hitting the
multiple PRLI issues.

Complete the dual PRLI support. Track explicitly whether scsi (fcp) or
nvme prli's have been sent. Accurately track protocol support detected
on each node as reported by the fabric or probed by PRLI traffic.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 20 insertions, 10 deletions

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 6ffd65a935c4..dfb21d9efb0d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2094,6 +2094,10 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	ndlp = (struct lpfc_nodelist *) cmdiocb->context1;
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag &= ~NLP_PRLI_SND;
+
+	/* Driver supports multiple FC4 types.  Counters matter. */
+	vport->fc_prli_sent--;
+	ndlp->fc4_prli_sent--;
 	spin_unlock_irq(shost->host_lock);
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
@@ -2101,9 +2105,6 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		irsp->ulpStatus, irsp->un.ulpWord[4],
 		ndlp->nlp_DID);
 
-	/* Ddriver supports multiple FC4 types.  Counters matter. */
-	vport->fc_prli_sent--;
-
 	/* PRLI completes to NPort <nlp_DID> */
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 			 "0103 PRLI completes to NPort x%06x "
@@ -2117,7 +2118,6 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 
 	if (irsp->ulpStatus) {
 		/* Check for retry */
-		ndlp->fc4_prli_sent--;
 		if (lpfc_els_retry(phba, cmdiocb, rspiocb)) {
 			/* ELS command is being retried */
 			goto out;
@@ -2196,6 +2196,15 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		ndlp->nlp_fc4_type |= NLP_FC4_NVME;
 	local_nlp_type = ndlp->nlp_fc4_type;
 
+	/* This routine will issue 1 or 2 PRLIs, so zero all the ndlp
+	 * fields here before any of them can complete.
+	 */
+	ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
+	ndlp->nlp_type &= ~(NLP_NVME_TARGET | NLP_NVME_INITIATOR);
+	ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
+	ndlp->nlp_flag &= ~NLP_FIRSTBURST;
+	ndlp->nvme_fb_size = 0;
+
  send_next_prli:
 	if (local_nlp_type & NLP_FC4_FCP) {
 		/* Payload is 4 + 16 = 20 x14 bytes. */
@@ -2304,6 +2313,13 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_prli;
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_PRLI_SND;
+
+	/* The vport counters are used for lpfc_scan_finished, but
+	 * the ndlp is used to track outstanding PRLIs for different
+	 * FC4 types.
+	 */
+	vport->fc_prli_sent++;
+	ndlp->fc4_prli_sent++;
 	spin_unlock_irq(shost->host_lock);
 	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
 	    IOCB_ERROR) {
@@ -2314,12 +2330,6 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		return 1;
 	}
 
-	/* The vport counters are used for lpfc_scan_finished, but
-	 * the ndlp is used to track outstanding PRLIs for different
-	 * FC4 types.
-	 */
-	vport->fc_prli_sent++;
-	ndlp->fc4_prli_sent++;
 
 	/* The driver supports 2 FC4 types.  Make sure
 	 * a PRLI is issued for all types before exiting.