[SCSI] isci: fix interpretation of "hard" reset

A hard reset to isci in the direct-attached case is one where the driver
internally manages debouncing the link.  In the sas-expander-attached
case a hard reset is one that clears affiliations.  The driver should
not be prematurely dropping affiliations at run time, that decision (to
force expander hard resets to ata devices) is left to userspace to
manage.  So, arrange for I_T_nexus resets to be sas-link-resets in the
expander-attached case and isci-hard-resets in the direct-attached case.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 20 insertions, 11 deletions

diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index f9d20c1e63ca..e55ef65f5212 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -305,7 +305,9 @@ static void port_state_machine_change(struct isci_port *iport,
 static void isci_port_hard_reset_complete(struct isci_port *isci_port,
 					  enum sci_status completion_status)
 {
-	dev_dbg(&isci_port->isci_host->pdev->dev,
+	struct isci_host *ihost = isci_port->owning_controller;
+
+	dev_dbg(&ihost->pdev->dev,
 		"%s: isci_port = %p, completion_status=%x\n",
 		     __func__, isci_port, completion_status);
 
@@ -316,23 +318,24 @@ static void isci_port_hard_reset_complete(struct isci_port *isci_port,
 
 		/* The reset failed.  The port state is now SCI_PORT_FAILED. */
 		if (isci_port->active_phy_mask == 0) {
+			int phy_idx = isci_port->last_active_phy;
+			struct isci_phy *iphy = &ihost->phys[phy_idx];
 
 			/* Generate the link down now to the host, since it
 			 * was intercepted by the hard reset state machine when
 			 * it really happened.
 			 */
-			isci_port_link_down(isci_port->isci_host,
-					    &isci_port->isci_host->phys[
-						   isci_port->last_active_phy],
-					    isci_port);
+			isci_port_link_down(ihost, iphy, isci_port);
 		}
 		/* Advance the port state so that link state changes will be
-		* noticed.
-		*/
+		 * noticed.
+		 */
 		port_state_machine_change(isci_port, SCI_PORT_SUB_WAITING);
 
 	}
-	complete_all(&isci_port->hard_reset_complete);
+	clear_bit(IPORT_RESET_PENDING, &isci_port->state);
+	wake_up(&ihost->eventq);
+
 }
 
 /* This method will return a true value if the specified phy can be assigned to
@@ -1610,6 +1613,11 @@ void sci_port_broadcast_change_received(struct isci_port *iport, struct isci_phy
 	isci_port_bc_change_received(ihost, iport, iphy);
 }
 
+static void wait_port_reset(struct isci_host *ihost, struct isci_port *iport)
+{
+	wait_event(ihost->eventq, !test_bit(IPORT_RESET_PENDING, &iport->state));
+}
+
 int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
 				 struct isci_phy *iphy)
 {
@@ -1620,9 +1628,8 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor
 	dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n",
 		__func__, iport);
 
-	init_completion(&iport->hard_reset_complete);
-
 	spin_lock_irqsave(&ihost->scic_lock, flags);
+	set_bit(IPORT_RESET_PENDING, &iport->state);
 
 	#define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT
 	status = sci_port_hard_reset(iport, ISCI_PORT_RESET_TIMEOUT);
@@ -1630,7 +1637,7 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor
 	spin_unlock_irqrestore(&ihost->scic_lock, flags);
 
 	if (status == SCI_SUCCESS) {
-		wait_for_completion(&iport->hard_reset_complete);
+		wait_port_reset(ihost, iport);
 
 		dev_dbg(&ihost->pdev->dev,
 			"%s: iport = %p; hard reset completion\n",
@@ -1644,6 +1651,8 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor
 				__func__, iport, iport->hard_reset_status);
 		}
 	} else {
+		clear_bit(IPORT_RESET_PENDING, &iport->state);
+		wake_up(&ihost->eventq);
 		ret = TMF_RESP_FUNC_FAILED;
 
 		dev_err(&ihost->pdev->dev,