diff options
| author | Neil Armstrong <narmstrong@baylibre.com> | 2020-09-04 14:55:31 +0200 |
|---|---|---|
| committer | Neil Armstrong <narmstrong@baylibre.com> | 2020-09-11 15:01:36 +0200 |
| commit | a328ca7e4af347e47742f36933df0fdac1c24ea5 (patch) | |
| tree | 3d59c6782637babbe857008bc5eb0441b92e54be /drivers/gpu/drm/bridge/synopsys | |
| parent | 33f290811d4c1a09c4e92f5bf0458525835dbcba (diff) | |
drm/bridge: dw-mipi-dsi: permit configuring the escape clock rate
The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency
higher than 10MHz for the TX Escape Clock, thus make the target rate
configurable.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904125531.15248-1-narmstrong@baylibre.com
Diffstat (limited to 'drivers/gpu/drm/bridge/synopsys')
| -rw-r--r-- | drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 25 |
1 files changed, 20 insertions, 5 deletions
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c index 7e9a62ad56e8..6b268f9445b3 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c @@ -605,15 +605,30 @@ static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi) static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi) { + const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops; + unsigned int esc_rate; /* in MHz */ + u32 esc_clk_division; + int ret; + /* * The maximum permitted escape clock is 20MHz and it is derived from - * lanebyteclk, which is running at "lane_mbps / 8". Thus we want: - * - * (lane_mbps >> 3) / esc_clk_division < 20 + * lanebyteclk, which is running at "lane_mbps / 8". + */ + if (phy_ops->get_esc_clk_rate) { + ret = phy_ops->get_esc_clk_rate(dsi->plat_data->priv_data, + &esc_rate); + if (ret) + DRM_DEBUG_DRIVER("Phy get_esc_clk_rate() failed\n"); + } else + esc_rate = 20; /* Default to 20MHz */ + + /* + * We want : + * (lane_mbps >> 3) / esc_clk_division < X * which is: - * (lane_mbps >> 3) / 20 > esc_clk_division + * (lane_mbps >> 3) / X > esc_clk_division */ - u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1; + esc_clk_division = (dsi->lane_mbps >> 3) / esc_rate + 1; dsi_write(dsi, DSI_PWR_UP, RESET); |