Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...

1 files changed, 37 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index f61f1bf68df4..43969da5d50b 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -628,6 +628,41 @@ void __init omap5xxx_check_revision(void)
 	pr_info("%s %s\n", soc_name, soc_rev);
 }
 
+void __init dra7xxx_check_revision(void)
+{
+	u32 idcode;
+	u16 hawkeye;
+	u8 rev;
+
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0xff;
+	switch (hawkeye) {
+	case 0xb990:
+		switch (rev) {
+		case 0:
+			omap_revision = DRA752_REV_ES1_0;
+			break;
+		case 1:
+		default:
+			omap_revision = DRA752_REV_ES1_1;
+		}
+		break;
+
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
+			__func__, idcode, hawkeye, rev);
+		omap_revision = DRA752_REV_ES1_1;
+	}
+
+	sprintf(soc_name, "DRA%03x", omap_rev() >> 16);
+	sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf,
+		(omap_rev() >> 8) & 0xf);
+
+	pr_info("%s %s\n", soc_name, soc_rev);
+}
+
 /*
  * Set up things for map_io and processor detection later on. Gets called
  * pretty much first thing from board init. For multi-omap, this gets
@@ -669,6 +704,8 @@ static const char * __init omap_get_family(void)
 		return kasprintf(GFP_KERNEL, "OMAP5");
 	else if (soc_is_am43xx())
 		return kasprintf(GFP_KERNEL, "AM43xx");
+	else if (soc_is_dra7xx())
+		return kasprintf(GFP_KERNEL, "DRA7");
 	else
 		return kasprintf(GFP_KERNEL, "Unknown");
 }