diff options
| author | Florian Fainelli <f.fainelli@gmail.com> | 2016-06-28 12:18:51 -0700 |
|---|---|---|
| committer | Florian Fainelli <f.fainelli@gmail.com> | 2016-08-08 11:14:09 -0700 |
| commit | d0cf9d8a3c78cf70e3a78e898fdc1b2adea0e6dd (patch) | |
| tree | 8a2d8e6918cd143da39bdb3953ffe5a853fc751b /arch/arm/Kconfig.debug | |
| parent | 29b4817d4018df78086157ea3a55c1d9424a7cfc (diff) | |
ARM: brcmstb: Add earlyprintk support using run-time checks
The SUN_TOP_CTRL_FAMILY_ID register is at a fixed absolute address for
all of our supported chips, so utilize its value to determine what the
UARTA base address should be based on the value we read.
Since the code is called both during decompressor when the MMU is off,
and after the MMU has been turned on in the kernel, and we want to do
the lookup only once, we use the same technique as tegra.S and have a
shared storage location between the decompressor and the kernel.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index a9693b6987a6..a660508a58bd 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -186,10 +186,11 @@ choice config DEBUG_BRCMSTB_UART bool "Use BRCMSTB UART for low-level debug" depends on ARCH_BRCMSTB - select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct - their output to the first serial port on these devices. + their output to the first serial port on these devices. The + UART physical and virtual address is automatically provided + based on the chip identification register value. If you have a Broadcom STB chip and would like early print messages to appear over the UART, select this option. @@ -1430,6 +1431,7 @@ config DEBUG_LL_INCLUDE default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 + default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART default "mach/debug-macro.S" # Compatibility options for PL01x @@ -1520,7 +1522,6 @@ config DEBUG_UART_PHYS default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 default 0xe8008000 if DEBUG_R7S72100_SCIF2 default 0xf0000be0 if ARCH_EBSA110 - default 0xf040ab00 if DEBUG_BRCMSTB_UART default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf7fc9000 if DEBUG_BERLIN_UART @@ -1604,7 +1605,6 @@ config DEBUG_UART_VIRT default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT - default 0xfc40ab00 if DEBUG_BRCMSTB_UART default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX @@ -1677,8 +1677,7 @@ config DEBUG_UART_8250_WORD DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ - DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ - DEBUG_BRCMSTB_UART + DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 config DEBUG_UART_8250_PALMCHIP bool "8250 UART is Palmchip BK-310x" @@ -1697,7 +1696,8 @@ config DEBUG_UNCOMPRESS bool depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ - (!DEBUG_TEGRA_UART || !ZBOOT_ROM) + (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ + !DEBUG_BRCMSTB_UART help This option influences the normal decompressor output for multiplatform kernels. Normally, multiplatform kernels disable |