diff options
| author | Rob Herring <robh@kernel.org> | 2018-07-23 15:59:44 -0600 |
|---|---|---|
| committer | Rob Herring <robh@kernel.org> | 2018-07-25 14:09:39 -0600 |
| commit | 791d3ef2e11100449837dc0b6fe884e60ca3a484 (patch) | |
| tree | 7797383556224291dd8e8b33f47808d50bb23653 /Documentation/devicetree/bindings/net/microchip,enc28j60.txt | |
| parent | 13d6753f1d250885749386867c4a4e8c06c905da (diff) | |
dt-bindings: remove 'interrupt-parent' from bindings
'interrupt-parent' is often documented as part of define bindings, but
it is really outside the scope of a device binding. It's never required
in a given node as it is often inherited from a parent node. Or it can
be implicit if a parent node is an 'interrupt-controller' node. So
remove it from all the binding files.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/net/microchip,enc28j60.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/microchip,enc28j60.txt | 3 |
1 files changed, 0 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt index 44dff53d4dda..24626e082b83 100644 --- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt +++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt @@ -8,9 +8,6 @@ the SPI master node. Required properties: - compatible: Should be "microchip,enc28j60" - reg: Specify the SPI chip select the ENC28J60 is wired to -- interrupt-parent: Specify the phandle of the source interrupt, see interrupt - binding documentation for details. Usually this is the GPIO bank - the interrupt line is wired to. - interrupts: Specify the interrupt index within the interrupt controller (referred to above in interrupt-parent) and interrupt type. The ENC28J60 natively generates falling edge interrupts, however, additional board logic |