Merge tag 'linux-watchdog-4.20-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - Add Armada 37xx CPU watchdog

 - w83627hf_wdt: Add Support for NCT6796D, NCT6797D, NCT6798D

 - hpwdt: several improvements

 - renesas_wdt: SPDX identifiers, stop when unregistering, support for
   R7S9210

 - rza_wdt: SPDX identifiers, support longer timeouts

 - core: fix null pointer dereference when releasing cdev

 - iTCO_wdt: Drop option vendorsupport=2

 - sama5d4: fix timeout-sec usage

 - lantiq_wdt: convert to watchdog framework

 - several small fixes

* tag 'linux-watchdog-4.20-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits)
  watchdog: ts4800: release syscon device node in ts4800_wdt_probe()
  watchdog: armada_37xx_wdt: use do_div for u64 division
  documentation: watchdog: add documentation for armada-37xx-wdt
  dt-bindings: watchdog: Document armada-37xx-wdt binding
  watchdog: Add support for Armada 37xx CPU watchdog
  dt-bindings: watchdog: add mpc8xxx-wdt support
  watchdog: mpc8xxx: provide boot status
  MAINTAINERS: Fix file pattern for MEN Z069 watchdog driver
  dt-bindings: watchdog: renesas-wdt: Add support for R7S9210
  watchdog: rza_wdt: Support longer timeouts
  watchdog: hpwdt: Disable PreTimeout when Timeout is smaller
  watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798D
  watchdog: mpc8xxx: use dev_xxxx() instead of pr_xxxx()
  watchdog: lantiq: add get_timeleft callback
  watchdog: lantiq: Convert to watchdog_device
  watchdog: lantiq: update register names to better match spec
  watchdog: sama5d4: fix timeout-sec usage
  watchdog: fix a small number of "watchog" typos in comments
  watchdog: rza_wdt: convert to SPDX identifiers
  watchdog: iTCO_wdt: Remove unused hooks
  ...

23 files changed, 783 insertions, 454 deletions

diff --git a/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt b/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
new file mode 100644
index 000000000000..a8d00c31a1d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
@@ -0,0 +1,23 @@
+* Armada 37xx CPU Watchdog Timer Controller
+
+Required properties:
+- compatible : must be "marvell,armada-3700-wdt"
+- reg : base physical address of the controller and length of memory mapped
+	region.
+- clocks : the clock feeding the watchdog timer. See clock-bindings.txt
+- marvell,system-controller : reference to syscon node for the CPU Miscellaneous
+	Registers
+
+Example:
+
+	cpu_misc: system-controller@d000 {
+		compatible = "marvell,armada-3700-cpu-misc", "syscon";
+		reg = <0xd000 0x1000>;
+	};
+
+	wdt: watchdog@8300 {
+		compatible = "marvell,armada-3700-wdt";
+		reg = <0x8300 0x40>;
+		marvell,system-controller = <&cpu_misc>;
+		clocks = <&xtalclk>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt b/Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt
new file mode 100644
index 000000000000..a384ff5b3ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt
@@ -0,0 +1,25 @@
+* Freescale mpc8xxx watchdog driver (For 83xx, 86xx and 8xx)
+
+Required properties:
+- compatible: Shall contain one of the following:
+	"mpc83xx_wdt" for an mpc83xx
+	"fsl,mpc8610-wdt" for an mpc86xx
+	"fsl,mpc823-wdt" for an mpc8xx
+- reg: base physical address and length of the area hosting the
+       watchdog registers.
+		On the 83xx, "Watchdog Timer Registers" area:	<0x200 0x100>
+		On the 86xx, "Watchdog Timer Registers" area:	<0xe4000 0x100>
+		On the 8xx, "General System Interface Unit" area: <0x0 0x10>
+
+Optional properties:
+- reg: additional physical address and length (4) of location of the
+       Reset Status Register (called RSTRSCR on the mpc86xx)
+		On the 83xx, it is located at offset 0x910
+		On the 86xx, it is located at offset 0xe0094
+		On the 8xx, it is located at offset 0x288
+
+Example:
+		WDT: watchdog@0 {
+		    compatible = "fsl,mpc823-wdt";
+		    reg = <0x0 0x10 0x288 0x4>;
+		};
diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
index d72d1181ec62..a8ee29fd9ac8 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -21,6 +21,7 @@ Required properties:
 	         - "renesas,r8a77990-wdt" (R-Car E3)
 	         - "renesas,r8a77995-wdt" (R-Car D3)
 	         - "renesas,r7s72100-wdt" (RZ/A1)
+	         - "renesas,r7s9210-wdt"  (RZ/A2)
 		The generic compatible string must be:
 		 - "renesas,rza-wdt" for RZ/A
 		 - "renesas,rcar-gen2-wdt" for R-Car Gen2 and RZ/G1
diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt
index 6d866c537127..55df692c5595 100644
--- a/Documentation/watchdog/hpwdt.txt
+++ b/Documentation/watchdog/hpwdt.txt
@@ -1,15 +1,12 @@
-Last reviewed: 05/20/2016
+Last reviewed: 08/20/2018
 
                      HPE iLO NMI Watchdog Driver
-              NMI sourcing for iLO based ProLiant Servers
-                     Documentation and Driver by
-                         Thomas Mingarelli
+                   for iLO based ProLiant Servers
 
  The HPE iLO NMI Watchdog driver is a kernel module that provides basic
- watchdog functionality and the added benefit of NMI sourcing. Both the
- watchdog functionality and the NMI sourcing capability need to be enabled
- by the user. Remember that the two modes are not dependent on one another.
- A user can have the NMI sourcing without the watchdog timer and vice-versa.
+ watchdog functionality and handler for the iLO "Generate NMI to System"
+ virtual button.
+
  All references to iLO in this document imply it also works on iLO2 and all
  subsequent generations.
 
@@ -21,12 +18,16 @@ Last reviewed: 05/20/2016
  not be updated in a timely fashion and a hardware system reset (also known as
  an Automatic Server Recovery (ASR)) event will occur.
 
- The hpwdt driver also has three (3) module parameters. They are the following:
+ The hpwdt driver also has the following module parameters:
 
  soft_margin - allows the user to set the watchdog timer value.
                Default value is 30 seconds.
- allow_kdump - allows the user to save off a kernel dump image after an NMI.
-               Default value is 1/ON
+ timeout     - an alias of soft_margin.
+ pretimeout  - allows the user to set the watchdog pretimeout value.
+               This is the number of seconds before timeout when an
+               NMI is delivered to the system. Setting the value to
+               zero disables the pretimeout NMI.
+               Default value is 9 seconds.
  nowayout    - basic watchdog parameter that does not allow the timer to
                be restarted or an impending ASR to be escaped.
                Default value is set when compiling the kernel. If it is set
@@ -37,61 +38,29 @@ Last reviewed: 05/20/2016
        interface to /dev/watchdog can be found in
        Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt.
 
- The NMI sourcing capability is disabled by default due to the inability to
- distinguish between "NMI Watchdog Ticks" and "HW generated NMI events" in the
- Linux kernel. What this means is that the hpwdt nmi handler code is called
- each time the NMI signal fires off. This could amount to several thousands of
- NMIs in a matter of seconds. If a user sees the Linux kernel's "dazed and
- confused" message in the logs or if the system gets into a hung state, then
- the hpwdt driver can be reloaded.
-
- 1. If the kernel has not been booted with nmi_watchdog turned off then
-    edit and place the nmi_watchdog=0 at the end of the currently booting
-    kernel line. Depending on your Linux distribution and platform setup:
-    For non-UEFI systems
-       /boot/grub/grub.conf   or
-       /boot/grub/menu.lst
-    For UEFI systems
-      /boot/efi/EFI/distroname/grub.conf   or
-      /boot/efi/efi/distroname/elilo.conf
- 2. reboot the sever
- 3. Once the system comes up perform a modprobe -r hpwdt
- 4. modprobe /lib/modules/`uname -r`/kernel/drivers/watchdog/hpwdt.ko
-
- Now, the hpwdt can successfully receive and source the NMI and provide a log
- message that details the reason for the NMI (as determined by the HPE BIOS).
-
- Below is a list of NMIs the HPE BIOS understands along with the associated
- code (reason):
-
-	No source found                00h
-
-	Uncorrectable Memory Error     01h
-
-	ASR NMI                        1Bh
-
-	PCI Parity Error               20h
-
-	NMI Button Press               27h
-
-	SB_BUS_NMI                     28h
-
-	ILO Doorbell NMI               29h
-
-	ILO IOP NMI                    2Ah
-
-	ILO Watchdog NMI               2Bh
-
-	Proc Throt NMI                 2Ch
+ Due to limitations in the iLO hardware, the NMI pretimeout if enabled,
+ can only be set to 9 seconds.  Attempts to set pretimeout to other
+ non-zero values will be rounded, possibly to zero.  Users should verify
+ the pretimeout value after attempting to set pretimeout or timeout.
 
-	Front Side Bus NMI             2Dh
+ Upon receipt of an NMI from the iLO, the hpwdt driver will initiate a
+ panic. This is to allow for a crash dump to be collected.  It is incumbent
+ upon the user to have properly configured the system for kdump.
 
-	PCI Express Error              2Fh
+ The default Linux kernel behavior upon panic is to print a kernel tombstone
+ and loop forever.  This is generally not what a watchdog user wants.
 
-	DMA controller NMI             30h
+ For those wishing to learn more please see:
+	Documentation/kdump/kdump.txt
+	Documentation/admin-guide/kernel-parameters.txt (panic=)
+	Your Linux Distribution specific documentation.
 
-	Hypertransport/CSI Error       31h
+ If the hpwdt does not receive the NMI associated with an expiring timer,
+ the iLO will proceed to reset the system at timeout if the timer hasn't
+ been updated.
 
+--
 
+ The HPE iLO NMI Watchdog Driver and documentation were originally developed
+ by Tom Mingarelli.
 
- -- Tom Mingarelli
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
index 6d6200ea27b8..0b88e333f9e1 100644
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -40,6 +40,11 @@ margin: Watchdog margin in seconds (default=60)
 nowayout: Disable watchdog shutdown on close
 	(default=kernel config parameter)
 -------------------------------------------------
+armada_37xx_wdt:
+timeout: Watchdog timeout in seconds. (default=120)
+nowayout: Disable watchdog shutdown on close
+	(default=kernel config parameter)
+-------------------------------------------------
 at91rm9200_wdt:
 wdt_time: Watchdog time in seconds. (default=5)
 nowayout: Watchdog cannot be stopped once started
diff --git a/MAINTAINERS b/MAINTAINERS
index 30cd3c4d8c7d..bfc9722a4932 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9568,7 +9568,7 @@ MEN Z069 WATCHDOG DRIVER
 M:	Johannes Thumshirn <jth@kernel.org>
 L:	linux-watchdog@vger.kernel.org
 S:	Maintained
-F:	drivers/watchdog/menz069_wdt.c
+F:	drivers/watchdog/menz69_wdt.c
 
 MESON AO CEC DRIVER FOR AMLOGIC SOCS
 M:	Neil Armstrong <narmstrong@baylibre.com>
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5ea8909a41f9..2d64333f4782 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -273,6 +273,17 @@ config ARM_SBSA_WATCHDOG
 	  To compile this driver as module, choose M here: The module
 	  will be called sbsa_gwdt.
 
+config ARMADA_37XX_WATCHDOG
+	tristate "Armada 37xx watchdog"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	select MFD_SYSCON
+	select WATCHDOG_CORE
+	help
+	   Say Y here to include support for the watchdog timer found on
+	   Marvell Armada 37xx SoCs.
+	   To compile this driver as a module, choose M here: the
+	   module will be called armada_37xx_wdt.
+
 config ASM9260_WATCHDOG
 	tristate "Alphascale ASM9260 watchdog"
 	depends on MACH_ASM9260 || COMPILE_TEST
@@ -1621,6 +1632,7 @@ config IMGPDC_WDT
 config LANTIQ_WDT
 	tristate "Lantiq SoC watchdog"
 	depends on LANTIQ
+	select WATCHDOG_CORE
 	help
 	  Hardware driver for the Lantiq SoC Watchdog Timer.
 
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index bf92e7bf9ce0..f69cdff5ad7f 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
 # ARM Architecture
 obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
 obj-$(CONFIG_ARM_SBSA_WATCHDOG) += sbsa_gwdt.o
+obj-$(CONFIG_ARMADA_37XX_WATCHDOG) += armada_37xx_wdt.o
 obj-$(CONFIG_ASM9260_WATCHDOG) += asm9260_wdt.o
 obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
 obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
diff --git a/drivers/watchdog/armada_37xx_wdt.c b/drivers/watchdog/armada_37xx_wdt.c
new file mode 100644
index 000000000000..4b4054f54df9
--- /dev/null
+++ b/drivers/watchdog/armada_37xx_wdt.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for Marvell Armada 37xx SoCs
+ *
+ * Author: Marek Behun <marek.behun@nic.cz>
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+/*
+ * There are four counters that can be used for watchdog on Armada 37xx.
+ * The addresses for counter control registers are register base plus ID*0x10,
+ * where ID is 0, 1, 2 or 3.
+ *
+ * In this driver we use IDs 0 and 1. Counter ID 1 is used as watchdog counter,
+ * while counter ID 0 is used to implement pinging the watchdog: counter ID 1 is
+ * set to restart counting from initial value on counter ID 0 end count event.
+ * Pinging is done by forcing immediate end count event on counter ID 0.
+ * If only one counter was used, pinging would have to be implemented by
+ * disabling and enabling the counter, leaving the system in a vulnerable state
+ * for a (really) short period of time.
+ *
+ * Counters ID 2 and 3 are enabled by default even before U-Boot loads,
+ * therefore this driver does not provide a way to use them, eg. by setting a
+ * property in device tree.
+ */
+
+#define CNTR_ID_RETRIGGER		0
+#define CNTR_ID_WDOG			1
+
+/* relative to cpu_misc */
+#define WDT_TIMER_SELECT		0x64
+#define WDT_TIMER_SELECT_MASK		0xf
+#define WDT_TIMER_SELECT_VAL		BIT(CNTR_ID_WDOG)
+
+/* relative to reg */
+#define CNTR_CTRL(id)			((id) * 0x10)
+#define CNTR_CTRL_ENABLE		0x0001
+#define CNTR_CTRL_ACTIVE		0x0002
+#define CNTR_CTRL_MODE_MASK		0x000c
+#define CNTR_CTRL_MODE_ONESHOT		0x0000
+#define CNTR_CTRL_MODE_HWSIG		0x000c
+#define CNTR_CTRL_TRIG_SRC_MASK		0x00f0
+#define CNTR_CTRL_TRIG_SRC_PREV_CNTR	0x0050
+#define CNTR_CTRL_PRESCALE_MASK		0xff00
+#define CNTR_CTRL_PRESCALE_MIN		2
+#define CNTR_CTRL_PRESCALE_SHIFT	8
+
+#define CNTR_COUNT_LOW(id)		(CNTR_CTRL(id) + 0x4)
+#define CNTR_COUNT_HIGH(id)		(CNTR_CTRL(id) + 0x8)
+
+#define WATCHDOG_TIMEOUT		120
+
+static unsigned int timeout;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			   __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct armada_37xx_watchdog {
+	struct watchdog_device wdt;
+	struct regmap *cpu_misc;
+	void __iomem *reg;
+	u64 timeout; /* in clock ticks */
+	unsigned long clk_rate;
+	struct clk *clk;
+};
+
+static u64 get_counter_value(struct armada_37xx_watchdog *dev, int id)
+{
+	u64 val;
+
+	/*
+	 * when low is read, high is latched into flip-flops so that it can be
+	 * read consistently without using software debouncing
+	 */
+	val = readl(dev->reg + CNTR_COUNT_LOW(id));
+	val |= ((u64)readl(dev->reg + CNTR_COUNT_HIGH(id))) << 32;
+
+	return val;
+}
+
+static void set_counter_value(struct armada_37xx_watchdog *dev, int id, u64 val)
+{
+	writel(val & 0xffffffff, dev->reg + CNTR_COUNT_LOW(id));
+	writel(val >> 32, dev->reg + CNTR_COUNT_HIGH(id));
+}
+
+static void counter_enable(struct armada_37xx_watchdog *dev, int id)
+{
+	u32 reg;
+
+	reg = readl(dev->reg + CNTR_CTRL(id));
+	reg |= CNTR_CTRL_ENABLE;
+	writel(reg, dev->reg + CNTR_CTRL(id));
+}
+
+static void counter_disable(struct armada_37xx_watchdog *dev, int id)
+{
+	u32 reg;
+
+	reg = readl(dev->reg + CNTR_CTRL(id));
+	reg &= ~CNTR_CTRL_ENABLE;
+	writel(reg, dev->reg + CNTR_CTRL(id));
+}
+
+static void init_counter(struct armada_37xx_watchdog *dev, int id, u32 mode,
+			 u32 trig_src)
+{
+	u32 reg;
+
+	reg = readl(dev->reg + CNTR_CTRL(id));
+
+	reg &= ~(CNTR_CTRL_MODE_MASK | CNTR_CTRL_PRESCALE_MASK |
+		 CNTR_CTRL_TRIG_SRC_MASK);
+
+	/* set mode */
+	reg |= mode & CNTR_CTRL_MODE_MASK;
+
+	/* set prescaler to the min value */
+	reg |= CNTR_CTRL_PRESCALE_MIN << CNTR_CTRL_PRESCALE_SHIFT;
+
+	/* set trigger source */
+	reg |= trig_src & CNTR_CTRL_TRIG_SRC_MASK;
+
+	writel(reg, dev->reg + CNTR_CTRL(id));
+}
+
+static int armada_37xx_wdt_ping(struct watchdog_device *wdt)
+{
+	struct armada_37xx_watchdog *dev = watchdog_get_drvdata(wdt);
+
+	/* counter 1 is retriggered by forcing end count on counter 0 */
+	counter_disable(dev, CNTR_ID_RETRIGGER);
+	counter_enable(dev, CNTR_ID_RETRIGGER);
+
+	return 0;
+}
+
+static unsigned int armada_37xx_wdt_get_timeleft(struct watchdog_device *wdt)
+{
+	struct armada_37xx_watchdog *dev = watchdog_get_drvdata(wdt);
+	u64 res;
+
+	res = get_counter_value(dev, CNTR_ID_WDOG) * CNTR_CTRL_PRESCALE_MIN;
+	do_div(res, dev->clk_rate);
+
+	return res;
+}
+
+static int armada_37xx_wdt_set_timeout(struct watchdog_device *wdt,
+				       unsigned int timeout)
+{
+	struct armada_37xx_watchdog *dev = watchdog_get_drvdata(wdt);
+
+	wdt->timeout = timeout;
+
+	/*
+	 * Compute the timeout in clock rate. We use smallest possible
+	 * prescaler, which divides the clock rate by 2
+	 * (CNTR_CTRL_PRESCALE_MIN).
+	 */
+	dev->timeout = (u64)dev->clk_rate * timeout;
+	do_div(dev->timeout, CNTR_CTRL_PRESCALE_MIN);
+
+	return 0;
+}
+
+static bool armada_37xx_wdt_is_running(struct armada_37xx_watchdog *dev)
+{
+	u32 reg;
+
+	regmap_read(dev->cpu_misc, WDT_TIMER_SELECT, &reg);
+	if ((reg & WDT_TIMER_SELECT_MASK) != WDT_TIMER_SELECT_VAL)
+		return false;
+
+	reg = readl(dev->reg + CNTR_CTRL(CNTR_ID_WDOG));
+	return !!(reg & CNTR_CTRL_ACTIVE);
+}
+
+static int armada_37xx_wdt_start(struct watchdog_device *wdt)
+{
+	struct armada_37xx_watchdog *dev = watchdog_get_drvdata(wdt);
+
+	/* select counter 1 as watchdog counter */
+	regmap_write(dev->cpu_misc, WDT_TIMER_SELECT, WDT_TIMER_SELECT_VAL);
+
+	/* init counter 0 as retrigger counter for counter 1 */
+	init_counter(dev, CNTR_ID_RETRIGGER, CNTR_CTRL_MODE_ONESHOT, 0);
+	set_counter_value(dev, CNTR_ID_RETRIGGER, 0);
+
+	/* init counter 1 to be retriggerable by counter 0 end count */
+	init_counter(dev, CNTR_ID_WDOG, CNTR_CTRL_MODE_HWSIG,
+		     CNTR_CTRL_TRIG_SRC_PREV_CNTR);
+	set_counter_value(dev, CNTR_ID_WDOG, dev->timeout);
+
+	/* enable counter 1 */
+	counter_enable(dev, CNTR_ID_WDOG);
+
+	/* start counter 1 by forcing immediate end count on counter 0 */
+	counter_enable(dev, CNTR_ID_RETRIGGER);
+
+	return 0;
+}
+
+static int armada_37xx_wdt_stop(struct watchdog_device *wdt)
+{
+	struct armada_37xx_watchdog *dev = watchdog_get_drvdata(wdt);
+
+	counter_disable(dev, CNTR_ID_WDOG);
+	counter_disable(dev, CNTR_ID_RETRIGGER);
+	regmap_write(dev->cpu_misc, WDT_TIMER_SELECT, 0);
+
+	return 0;
+}
+
+static const struct watchdog_info armada_37xx_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "Armada 37xx Watchdog",
+};
+
+static const struct watchdog_ops armada_37xx_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = armada_37xx_wdt_start,
+	.stop = armada_37xx_wdt_stop,
+	.ping = armada_37xx_wdt_ping,
+	.set_timeout = armada_37xx_wdt_set_timeout,
+	.get_timeleft = armada_37xx_wdt_get_timeleft,
+};
+
+static int armada_37xx_wdt_probe(struct platform_device *pdev)
+{
+	struct armada_37xx_watchdog *dev;
+	struct resource *res;
+	struct regmap *regmap;
+	int ret;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct armada_37xx_watchdog),
+			   GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->wdt.info = &armada_37xx_wdt_info;
+	dev->wdt.ops = &armada_37xx_wdt_ops;
+
+	regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						 "marvell,system-controller");
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+	dev->cpu_misc = regmap;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+	dev->reg = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+
+	/* init clock */
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
+
+	ret = clk_prepare_enable(dev->clk);
+	if (ret)
+		return ret;
+
+	dev->clk_rate = clk_get_rate(dev->clk);
+	if (!dev->clk_rate) {
+		ret = -EINVAL;
+		goto disable_clk;
+	}
+
+	/*
+	 * Since the timeout in seconds is given as 32 bit unsigned int, and
+	 * the counters hold 64 bit values, even after multiplication by clock
+	 * rate the counter can hold timeout of UINT_MAX seconds.
+	 */
+	dev->wdt.min_timeout = 1;
+	dev->wdt.max_timeout = UINT_MAX;
+	dev->wdt.parent = &pdev->dev;
+
+	/* default value, possibly override by module parameter or dtb */
+	dev->wdt.timeout = WATCHDOG_TIMEOUT;
+	watchdog_init_timeout(&dev->wdt, timeout, &pdev->dev);
+
+	platform_set_drvdata(pdev, &dev->wdt);
+	watchdog_set_drvdata(&dev->wdt, dev);
+
+	armada_37xx_wdt_set_timeout(&dev->wdt, dev->wdt.timeout);
+
+	if (armada_37xx_wdt_is_running(dev))
+		set_bit(WDOG_HW_RUNNING, &dev->wdt.status);
+
+	watchdog_set_nowayout(&dev->wdt, nowayout);
+	ret = watchdog_register_device(&dev->wdt);
+	if (ret)
+		goto disable_clk;
+
+	dev_info(&pdev->dev, "Initial timeout %d sec%s\n",
+		 dev->wdt.timeout, nowayout ? ", nowayout" : "");
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(dev->clk);
+	return ret;
+}
+
+static int armada_37xx_wdt_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdt = platform_get_drvdata(pdev);
+	struct armada_37xx_watchdog *dev = watchdog_get_drvdata(wdt);
+
+	watchdog_unregister_device(wdt);
+	clk_disable_unprepare(dev->clk);
+	return 0;
+}
+
+static void armada_37xx_wdt_shutdown(struct platform_device *pdev)
+{
+	struct watchdog_device *wdt = platform_get_drvdata(pdev);
+
+	armada_37xx_wdt_stop(wdt);
+}
+
+static int __maybe_unused armada_37xx_wdt_suspend(struct device *dev)
+{
+	struct watchdog_device *wdt = dev_get_drvdata(dev);
+
+	return armada_37xx_wdt_stop(wdt);
+}
+
+static int __maybe_unused armada_37xx_wdt_resume(struct device *dev)
+{
+	struct watchdog_device *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(wdt))
+		return armada_37xx_wdt_start(wdt);
+
+	return 0;
+}
+
+static const struct dev_pm_ops armada_37xx_wdt_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(armada_37xx_wdt_suspend,
+				armada_37xx_wdt_resume)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id armada_37xx_wdt_match[] = {
+	{ .compatible = "marvell,armada-3700-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, armada_37xx_wdt_match);
+#endif
+
+static struct platform_driver armada_37xx_wdt_driver = {
+	.probe		= armada_37xx_wdt_probe,
+	.remove		= armada_37xx_wdt_remove,
+	.shutdown	= armada_37xx_wdt_shutdown,
+	.driver		= {
+		.name	= "armada_37xx_wdt",
+		.of_match_table = of_match_ptr(armada_37xx_wdt_match),
+		.pm = &armada_37xx_wdt_dev_pm_ops,
+	},
+};
+
+module_platform_driver(armada_37xx_wdt_driver);
+
+MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
+MODULE_DESCRIPTION("Armada 37xx CPU Watchdog");
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:armada_37xx_wdt");
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 3ad1e44bef44..6e78a34c2370 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -25,7 +25,7 @@
 /* If the kernel parameter wdt=1, the watchdog will be enabled at boot.
  * Also, the wdt_period sets the watchdog timer period timeout.
  * For E500 cpus the wdt_period sets which bit changing from 0->1 will
- * trigger a watchog timeout. This watchdog timeout will occur 3 times, the
+ * trigger a watchdog timeout. This watchdog timeout will occur 3 times, the
  * first time nothing will happen, the second time a watchdog exception will
  * occur, and the final time the board will reset.
  */
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 9dc62a461451..93562304f7aa 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -26,7 +26,7 @@
 #include <linux/watchdog.h>
 #include <asm/nmi.h>
 
-#define HPWDT_VERSION			"2.0.0"
+#define HPWDT_VERSION			"2.0.1"
 #define SECS_TO_TICKS(secs)		((secs) * 1000 / 128)
 #define TICKS_TO_SECS(ticks)		((ticks) * 128 / 1000)
 #define HPWDT_MAX_TIMER			TICKS_TO_SECS(65535)
@@ -162,7 +162,7 @@ static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs)
 	if (ilo5 && ulReason == NMI_UNKNOWN && !mynmi)
 		return NMI_DONE;
 
-	if (ilo5 && !pretimeout)
+	if (ilo5 && !pretimeout && !mynmi)
 		return NMI_DONE;
 
 	hpwdt_stop();
@@ -205,9 +205,7 @@ static struct watchdog_device hpwdt_dev = {
 	.min_timeout	= 1,
 	.max_timeout	= HPWDT_MAX_TIMER,
 	.timeout	= DEFAULT_MARGIN,
-#ifdef CONFIG_HPWDT_NMI_DECODING
 	.pretimeout	= PRETIMEOUT_SEC,
-#endif
 };
 
 
@@ -313,6 +311,12 @@ static int hpwdt_init_one(struct pci_dev *dev,
 	if (watchdog_init_timeout(&hpwdt_dev, soft_margin, NULL))
 		dev_warn(&dev->dev, "Invalid soft_margin: %d.\n", soft_margin);
 
+	if (pretimeout && hpwdt_dev.timeout <= PRETIMEOUT_SEC) {
+		dev_warn(&dev->dev, "timeout <= pretimeout. Setting pretimeout to zero\n");
+		pretimeout = 0;
+	}
+	hpwdt_dev.pretimeout = pretimeout ? PRETIMEOUT_SEC : 0;
+
 	hpwdt_dev.parent = &dev->dev;
 	retval = watchdog_register_device(&hpwdt_dev);
 	if (retval < 0) {
@@ -320,9 +324,12 @@ static int hpwdt_init_one(struct pci_dev *dev,
 		goto error_wd_register;
 	}
 
-	dev_info(&dev->dev, "HPE Watchdog Timer Driver: %s"
-			", timer margin: %d seconds (nowayout=%d).\n",
-			HPWDT_VERSION, hpwdt_dev.timeout, nowayout);
+	dev_info(&dev->dev, "HPE Watchdog Timer Driver: Version: %s\n",
+				HPWDT_VERSION);
+	dev_info(&dev->dev, "timeout: %d seconds (nowayout=%d)\n",
+				hpwdt_dev.timeout, nowayout);
+	dev_info(&dev->dev, "pretimeout: %s.\n",
+				pretimeout ? "on" : "off");
 
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_HP_3PAR)
 		ilo5 = true;
@@ -364,6 +371,9 @@ MODULE_VERSION(HPWDT_VERSION);
 module_param(soft_margin, int, 0);
 MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
 
+module_param_named(timeout, soft_margin, int, 0);
+MODULE_PARM_DESC(timeout, "Alias of soft_margin");
+
 module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/drivers/watchdog/iTCO_vendor.h b/drivers/watchdog/iTCO_vendor.h
index 7b82a7c6e7c3..0f7373ba10d5 100644
--- a/drivers/watchdog/iTCO_vendor.h
+++ b/drivers/watchdog/iTCO_vendor.h
@@ -3,14 +3,10 @@
 #ifdef CONFIG_ITCO_VENDOR_SUPPORT
 extern void iTCO_vendor_pre_start(struct resource *, unsigned int);
 extern void iTCO_vendor_pre_stop(struct resource *);
-extern void iTCO_vendor_pre_keepalive(struct resource *, unsigned int);
-extern void iTCO_vendor_pre_set_heartbeat(unsigned int);
 extern int iTCO_vendor_check_noreboot_on(void);
 #else
 #define iTCO_vendor_pre_start(acpibase, heartbeat)	{}
 #define iTCO_vendor_pre_stop(acpibase)			{}
-#define iTCO_vendor_pre_keepalive(acpibase, heartbeat)	{}
-#define iTCO_vendor_pre_set_heartbeat(heartbeat)	{}
 #define iTCO_vendor_check_noreboot_on()			1
 				/* 1=check noreboot; 0=don't check */
 #endif
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index b6b2f90b5d44..68a9d9cc2eb8 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -38,7 +38,7 @@
 /* List of vendor support modes */
 /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
 #define SUPERMICRO_OLD_BOARD	1
-/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
+/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems - no longer supported */
 #define SUPERMICRO_NEW_BOARD	2
 /* Broken BIOS */
 #define BROKEN_BIOS		911
@@ -46,8 +46,7 @@
 static int vendorsupport;
 module_param(vendorsupport, int, 0);
 MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
-			"0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, "
-							"911=Broken SMI BIOS");
+			"0 (none), 1=SuperMicro Pent3, 911=Broken SMI BIOS");
 
 /*
  *	Vendor Specific Support
@@ -98,143 +97,6 @@ static void supermicro_old_pre_stop(struct resource *smires)
 }
 
 /*
- *	Vendor Support: 2
- *	Board: Super Micro Computer Inc. P4SBx, P4DPx
- *	iTCO chipset: ICH4
- *
- *	Code contributed by: R. Seretny <lkpatches@paypc.com>
- *	Documentation obtained by R. Seretny from SuperMicro Technical Support
- *
- *	To enable Watchdog function:
- *	 1. BIOS
- *	  For P4SBx:
- *	  BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature
- *	  For P4DPx:
- *	  BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog
- *	 This setting enables or disables Watchdog function. When enabled, the
- *	 default watchdog timer is set to be 5 minutes (about 4m35s). It is
- *	 enough to load and run the OS. The application (service or driver) has
- *	 to take over the control once OS is running up and before watchdog
- *	 expires.
- *
- *	 2. JUMPER
- *	  For P4SBx: JP39
- *	  For P4DPx: JP37
- *	  This jumper is used for safety.  Closed is enabled. This jumper
- *	  prevents user enables watchdog in BIOS by accident.
- *
- *	 To enable Watch Dog function, both BIOS and JUMPER must be enabled.
- *
- *	The documentation lists motherboards P4SBx and P4DPx series as of
- *	20-March-2002. However, this code works flawlessly with much newer
- *	motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82).
- *
- *	The original iTCO driver as written does not actually reset the
- *	watchdog timer on these machines, as a result they reboot after five
- *	minutes.
- *
- *	NOTE: You may leave the Watchdog function disabled in the SuperMicro
- *	BIOS to avoid a "boot-race"... This driver will enable watchdog
- *	functionality even if it's disabled in the BIOS once the /dev/watchdog
- *	file is opened.
- */
-
-/* I/O Port's */
-#define SM_REGINDEX	0x2e	/* SuperMicro ICH4+ Register Index */
-#define SM_DATAIO	0x2f	/* SuperMicro ICH4+ Register Data I/O */
-
-/* Control Register's */
-#define SM_CTLPAGESW	0x07	/* SuperMicro ICH4+ Control Page Switch */
-#define SM_CTLPAGE	0x08	/* SuperMicro ICH4+ Control Page Num */
-
-#define SM_WATCHENABLE	0x30	/* Watchdog enable: Bit 0: 0=off, 1=on */
-
-#define SM_WATCHPAGE	0x87	/* Watchdog unlock control page */
-
-#define SM_ENDWATCH	0xAA	/* Watchdog lock control page */
-
-#define SM_COUNTMODE	0xf5	/* Watchdog count mode select */
-				/* (Bit 3: 0 = seconds, 1 = minutes */
-
-#define SM_WATCHTIMER	0xf6	/* 8-bits, Watchdog timer counter (RW) */
-
-#define SM_RESETCONTROL	0xf7	/* Watchdog reset control */
-				/* Bit 6: timer is reset by kbd interrupt */
-				/* Bit 7: timer is reset by mouse interrupt */
-
-static void supermicro_new_unlock_watchdog(void)
-{
-	/* Write 0x87 to port 0x2e twice */
-	outb(SM_WATCHPAGE, SM_REGINDEX);
-	outb(SM_WATCHPAGE, SM_REGINDEX);
-	/* Switch to watchdog control page */
-	outb(SM_CTLPAGESW, SM_REGINDEX);
-	outb(SM_CTLPAGE, SM_DATAIO);
-}
-
-static void supermicro_new_lock_watchdog(void)
-{
-	outb(SM_ENDWATCH, SM_REGINDEX);
-}
-
-static void supermicro_new_pre_start(unsigned int heartbeat)
-{
-	unsigned int val;
-
-	supermicro_new_unlock_watchdog();
-
-	/* Watchdog timer setting needs to be in seconds*/
-	outb(SM_COUNTMODE, SM_REGINDEX);
-	val = inb(SM_DATAIO);
-	val &= 0xF7;
-	outb(val, SM_DATAIO);
-
-	/* Write heartbeat interval to WDOG */
-	outb(SM_WATCHTIMER, SM_REGINDEX);
-	outb((heartbeat & 255), SM_DATAIO);
-
-	/* Make sure keyboard/mouse interrupts don't interfere */
-	outb(SM_RESETCONTROL, SM_REGINDEX);
-	val = inb(SM_DATAIO);
-	val &= 0x3f;
-	outb(val, SM_DATAIO);
-
-	/* enable watchdog by setting bit 0 of Watchdog Enable to 1 */
-	outb(SM_WATCHENABLE, SM_REGINDEX);
-	val = inb(SM_DATAIO);
-	val |= 0x01;
-	outb(val, SM_DATAIO);
-
-	supermicro_new_lock_watchdog();
-}
-
-static void supermicro_new_pre_stop(void)
-{
-	unsigned int val;
-
-	supermicro_new_unlock_watchdog();
-
-	/* disable watchdog by setting bit 0 of Watchdog Enable to 0 */
-	outb(SM_WATCHENABLE, SM_REGINDEX);
-	val = inb(SM_DATAIO);
-	val &= 0xFE;
-	outb(val, SM_DATAIO);
-
-	supermicro_new_lock_watchdog();
-}
-
-static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
-{
-	supermicro_new_unlock_watchdog();
-
-	/* reset watchdog timeout to heartveat value */
-	outb(SM_WATCHTIMER, SM_REGINDEX);
-	outb((heartbeat & 255), SM_DATAIO);
-
-	supermicro_new_lock_watchdog();
-}
-
-/*
  *	Vendor Support: 911
  *	Board: Some Intel ICHx based motherboards
  *	iTCO chipset: ICH7+
@@ -298,9 +160,6 @@ void iTCO_vendor_pre_start(struct resource *smires,
 	case SUPERMICRO_OLD_BOARD:
 		supermicro_old_pre_start(smires);
 		break;
-	case SUPERMICRO_NEW_BOARD:
-		supermicro_new_pre_start(heartbeat);
-		break;
 	case BROKEN_BIOS:
 		broken_bios_start(smires);
 		break;
@@ -314,9 +173,6 @@ void iTCO_vendor_pre_stop(struct resource *smires)
 	case SUPERMICRO_OLD_BOARD:
 		supermicro_old_pre_stop(smires);
 		break;
-	case SUPERMICRO_NEW_BOARD:
-		supermicro_new_pre_stop();
-		break;
 	case BROKEN_BIOS:
 		broken_bios_stop(smires);
 		break;
@@ -324,20 +180,6 @@ void iTCO_vendor_pre_stop(struct resource *smires)
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_stop);
 
-void iTCO_vendor_pre_keepalive(struct resource *smires, unsigned int heartbeat)
-{
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
-		supermicro_new_pre_set_heartbeat(heartbeat);
-}
-EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
-
-void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat)
-{
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
-		supermicro_new_pre_set_heartbeat(heartbeat);
-}
-EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
-
 int iTCO_vendor_check_noreboot_on(void)
 {
 	switch (vendorsupport) {
@@ -351,6 +193,12 @@ EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
 
 static int __init iTCO_vendor_init_module(void)
 {
+	if (vendorsupport == SUPERMICRO_NEW_BOARD) {
+		pr_warn("Option vendorsupport=%d is no longer supported, "
+			"please use the w83627hf_wdt driver instead\n",
+			SUPERMICRO_NEW_BOARD);
+		return -EINVAL;
+	}
 	pr_info("vendor-support=%d\n", vendorsupport);
 	return 0;
 }
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 347f0389b089..0a5318b7865e 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -304,8 +304,6 @@ static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
 
 	spin_lock(&p->io_lock);
 
-	iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout);
-
 	/* Reload the timer by writing to the TCO Timer Counter register */
 	if (p->iTCO_version >= 2) {
 		outw(0x01, TCO_RLD(p));
@@ -342,8 +340,6 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
 	    (p->iTCO_version == 1 && tmrval > 0x03f))
 		return -EINVAL;
 
-	iTCO_vendor_pre_set_heartbeat(tmrval);
-
 	/* Write new heartbeat to watchdog */
 	if (p->iTCO_version >= 2) {
 		spin_lock(&p->io_lock);
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
index 7f43cefa0eae..83da84d6074b 100644
--- a/drivers/watchdog/lantiq_wdt.c
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -8,11 +8,8 @@
  *  Based on EP93xx wdt driver
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
+#include <linux/bitops.h>
 #include <linux/watchdog.h>
 #include <linux/of_platform.h>
 #include <linux/uaccess.h>
@@ -40,169 +37,128 @@
  * essentially the following two magic passwords need to be written to allow
  * IO access to the WDT core
  */
-#define LTQ_WDT_PW1		0x00BE0000
-#define LTQ_WDT_PW2		0x00DC0000
-
-#define LTQ_WDT_CR		0x0	/* watchdog control register */
-#define LTQ_WDT_SR		0x8	/* watchdog status register */
+#define LTQ_WDT_CR_PW1		0x00BE0000
+#define LTQ_WDT_CR_PW2		0x00DC0000
+
+#define LTQ_WDT_CR		0x0		/* watchdog control register */
+#define  LTQ_WDT_CR_GEN		BIT(31)		/* enable bit */
+/* Pre-warning limit set to 1/16 of max WDT period */
+#define  LTQ_WDT_CR_PWL		(0x3 << 26)
+/* set clock divider to 0x40000 */
+#define  LTQ_WDT_CR_CLKDIV	(0x3 << 24)
+#define  LTQ_WDT_CR_PW_MASK	GENMASK(23, 16)	/* Password field */
+#define  LTQ_WDT_CR_MAX_TIMEOUT	((1 << 16) - 1)	/* The reload field is 16 bit */
+#define LTQ_WDT_SR		0x8		/* watchdog status register */
+#define  LTQ_WDT_SR_EN		BIT(31)		/* Enable */
+#define  LTQ_WDT_SR_VALUE_MASK	GENMASK(15, 0)	/* Timer value */
 
-#define LTQ_WDT_SR_EN		(0x1 << 31)	/* enable bit */
-#define LTQ_WDT_SR_PWD		(0x3 << 26)	/* turn on power */
-#define LTQ_WDT_SR_CLKDIV	(0x3 << 24)	/* turn on clock and set */
-						/* divider to 0x40000 */
 #define LTQ_WDT_DIVIDER		0x40000
-#define LTQ_MAX_TIMEOUT		((1 << 16) - 1)	/* the reload field is 16 bit */
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
 
-static void __iomem *ltq_wdt_membase;
-static unsigned long ltq_io_region_clk_rate;
+struct ltq_wdt_hw {
+	int (*bootstatus_get)(struct device *dev);
+};
 
-static unsigned long ltq_wdt_bootstatus;
-static unsigned long ltq_wdt_in_use;
-static int ltq_wdt_timeout = 30;
-static int ltq_wdt_ok_to_close;
+struct ltq_wdt_priv {
+	struct watchdog_device wdt;
+	void __iomem *membase;
+	unsigned long clk_rate;
+};
 
-static void
-ltq_wdt_enable(void)
+static u32 ltq_wdt_r32(struct ltq_wdt_priv *priv, u32 offset)
 {
-	unsigned long int timeout = ltq_wdt_timeout *
-			(ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
-	if (timeout > LTQ_MAX_TIMEOUT)
-		timeout = LTQ_MAX_TIMEOUT;
-
-	/* write the first password magic */
-	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
-	/* write the second magic plus the configuration and new timeout */
-	ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
-		LTQ_WDT_PW2 | timeout, ltq_wdt_membase + LTQ_WDT_CR);
+	return __raw_readl(priv->membase + offset);
 }
 
-static void
-ltq_wdt_disable(void)
+static void ltq_wdt_w32(struct ltq_wdt_priv *priv, u32 val, u32 offset)
 {
-	/* write the first password magic */
-	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
-	/*
-	 * write the second password magic with no config
-	 * this turns the watchdog off
-	 */
-	ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR);
+	__raw_writel(val, priv->membase + offset);
 }
 
-static ssize_t
-ltq_wdt_write(struct file *file, const char __user *data,
-		size_t len, loff_t *ppos)
+static void ltq_wdt_mask(struct ltq_wdt_priv *priv, u32 clear, u32 set,
+			 u32 offset)
 {
-	if (len) {
-		if (!nowayout) {
-			size_t i;
-
-			ltq_wdt_ok_to_close = 0;
-			for (i = 0; i != len; i++) {
-				char c;
-
-				if (get_user(c, data + i))
-					return -EFAULT;
-				if (c == 'V')
-					ltq_wdt_ok_to_close = 1;
-				else
-					ltq_wdt_ok_to_close = 0;
-			}
-		}
-		ltq_wdt_enable();
-	}
+	u32 val = ltq_wdt_r32(priv, offset);
 
-	return len;
+	val &= ~(clear);
+	val |= set;
+	ltq_wdt_w32(priv, val, offset);
 }
 
-static struct watchdog_info ident = {
+static struct ltq_wdt_priv *ltq_wdt_get_priv(struct watchdog_device *wdt)
+{
+	return container_of(wdt, struct ltq_wdt_priv, wdt);
+}
+
+static struct watchdog_info ltq_wdt_info = {
 	.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
-			WDIOF_CARDRESET,
+		   WDIOF_CARDRESET,
 	.identity = "ltq_wdt",
 };
 
-static long
-ltq_wdt_ioctl(struct file *file,
-		unsigned int cmd, unsigned long arg)
+static int ltq_wdt_start(struct watchdog_device *wdt)
 {
-	int ret = -ENOTTY;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
-				sizeof(ident)) ? -EFAULT : 0;
-		break;
-
-	case WDIOC_GETBOOTSTATUS:
-		ret = put_user(ltq_wdt_bootstatus, (int __user *)arg);
-		break;
-
-	case WDIOC_GETSTATUS:
-		ret = put_user(0, (int __user *)arg);
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		ret = get_user(ltq_wdt_timeout, (int __user *)arg);
-		if (!ret)
-			ltq_wdt_enable();
-		/* intentional drop through */
-	case WDIOC_GETTIMEOUT:
-		ret = put_user(ltq_wdt_timeout, (int __user *)arg);
-		break;
-
-	case WDIOC_KEEPALIVE:
-		ltq_wdt_enable();
-		ret = 0;
-		break;
-	}
-	return ret;
+	struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt);
+	u32 timeout;
+
+	timeout = wdt->timeout * priv->clk_rate;
+
+	ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK, LTQ_WDT_CR_PW1, LTQ_WDT_CR);
+	/* write the second magic plus the configuration and new timeout */
+	ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK | LTQ_WDT_CR_MAX_TIMEOUT,
+		     LTQ_WDT_CR_GEN | LTQ_WDT_CR_PWL | LTQ_WDT_CR_CLKDIV |
+		     LTQ_WDT_CR_PW2 | timeout,
+		     LTQ_WDT_CR);
+
+	return 0;
 }
 
-static int
-ltq_wdt_open(struct inode *inode, struct file *file)
+static int ltq_wdt_stop(struct watchdog_device *wdt)
 {
-	if (test_and_set_bit(0, &ltq_wdt_in_use))
-		return -EBUSY;
-	ltq_wdt_in_use = 1;
-	ltq_wdt_enable();
+	struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt);
 
-	return nonseekable_open(inode, file);
+	ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK, LTQ_WDT_CR_PW1, LTQ_WDT_CR);
+	ltq_wdt_mask(priv, LTQ_WDT_CR_GEN | LTQ_WDT_CR_PW_MASK,
+		     LTQ_WDT_CR_PW2, LTQ_WDT_CR);
+
+	return 0;
 }
 
-static int
-ltq_wdt_release(struct inode *inode, struct file *file)
+static int ltq_wdt_ping(struct watchdog_device *wdt)
 {
-	if (ltq_wdt_ok_to_close)
-		ltq_wdt_disable();
-	else
-		pr_err("watchdog closed without warning\n");
-	ltq_wdt_ok_to_close = 0;
-	clear_bit(0, &ltq_wdt_in_use);
+	struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt);
+	u32 timeout;
+
+	timeout = wdt->timeout * priv->clk_rate;
+
+	ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK, LTQ_WDT_CR_PW1, LTQ_WDT_CR);
+	/* write the second magic plus the configuration and new timeout */
+	ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK | LTQ_WDT_CR_MAX_TIMEOUT,
+		     LTQ_WDT_CR_PW2 | timeout, LTQ_WDT_CR);
 
 	return 0;
 }
 
-static const struct file_operations ltq_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.write		= ltq_wdt_write,
-	.unlocked_ioctl	= ltq_wdt_ioctl,
-	.open		= ltq_wdt_open,
-	.release	= ltq_wdt_release,
-	.llseek		= no_llseek,
-};
+static unsigned int ltq_wdt_get_timeleft(struct watchdog_device *wdt)
+{
+	struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt);
+	u64 timeout;
 
-static struct miscdevice ltq_wdt_miscdev = {
-	.minor	= WATCHDOG_MINOR,
-	.name	= "watchdog",
-	.fops	= &ltq_wdt_fops,
-};
+	timeout = ltq_wdt_r32(priv, LTQ_WDT_SR) & LTQ_WDT_SR_VALUE_MASK;
+	return do_div(timeout, priv->clk_rate);
+}
 
-typedef int (*ltq_wdt_bootstatus_set)(struct platform_device *pdev);
+static const struct watchdog_ops ltq_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= ltq_wdt_start,
+	.stop		= ltq_wdt_stop,
+	.ping		= ltq_wdt_ping,
+	.get_timeleft	= ltq_wdt_get_timeleft,
+};
 
-static int ltq_wdt_bootstatus_xrx(struct platform_device *pdev)
+static int ltq_wdt_xrx_bootstatus_get(struct device *dev)
 {
-	struct device *dev = &pdev->dev;
 	struct regmap *rcu_regmap;
 	u32 val;
 	int err;
@@ -216,14 +172,13 @@ static int ltq_wdt_bootstatus_xrx(struct platform_device *pdev)
 		return err;
 
 	if (val & LTQ_XRX_RCU_RST_STAT_WDT)
-		ltq_wdt_bootstatus = WDIOF_CARDRESET;
+		return WDIOF_CARDRESET;
 
 	return 0;
 }
 
-static int ltq_wdt_bootstatus_falcon(struct platform_device *pdev)
+static int ltq_wdt_falcon_bootstatus_get(struct device *dev)
 {
-	struct device *dev = &pdev->dev;
 	struct regmap *rcu_regmap;
 	u32 val;
 	int err;
@@ -238,62 +193,90 @@ static int ltq_wdt_bootstatus_falcon(struct platform_device *pdev)
 		return err;
 
 	if ((val & LTQ_FALCON_SYS1_CPU0RS_MASK) == LTQ_FALCON_SYS1_CPU0RS_WDT)
-		ltq_wdt_bootstatus = WDIOF_CARDRESET;
+		return WDIOF_CARDRESET;
 
 	return 0;
 }
 
-static int
-ltq_wdt_probe(struct platform_device *pdev)
+static int ltq_wdt_probe(struct platform_device *pdev)
 {
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct device *dev = &pdev->dev;
+	struct ltq_wdt_priv *priv;
+	struct watchdog_device *wdt;
+	struct resource *res;
 	struct clk *clk;
-	ltq_wdt_bootstatus_set ltq_wdt_bootstatus_set;
+	const struct ltq_wdt_hw *ltq_wdt_hw;
 	int ret;
+	u32 status;
 
-	ltq_wdt_membase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(ltq_wdt_membase))
-		return PTR_ERR(ltq_wdt_membase);
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-	ltq_wdt_bootstatus_set = of_device_get_match_data(&pdev->dev);
-	if (ltq_wdt_bootstatus_set) {
-		ret = ltq_wdt_bootstatus_set(pdev);
-		if (ret)
-			return ret;
-	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->membase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->membase))
+		return PTR_ERR(priv->membase);
 
 	/* we do not need to enable the clock as it is always running */
 	clk = clk_get_io();
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "Failed to get clock\n");
-		return -ENOENT;
+	priv->clk_rate = clk_get_rate(clk) / LTQ_WDT_DIVIDER;
+	if (!priv->clk_rate) {
+		dev_err(dev, "clock rate less than divider %i\n",
+			LTQ_WDT_DIVIDER);
+		return -EINVAL;
 	}
-	ltq_io_region_clk_rate = clk_get_rate(clk);
-	clk_put(clk);
 
-	dev_info(&pdev->dev, "Init done\n");
-	return misc_register(&ltq_wdt_miscdev);
-}
+	wdt = &priv->wdt;
+	wdt->info		= &ltq_wdt_info;
+	wdt->ops		= &ltq_wdt_ops;
+	wdt->min_timeout	= 1;
+	wdt->max_timeout	= LTQ_WDT_CR_MAX_TIMEOUT / priv->clk_rate;
+	wdt->timeout		= wdt->max_timeout;
+	wdt->parent		= dev;
+
+	ltq_wdt_hw = of_device_get_match_data(dev);
+	if (ltq_wdt_hw && ltq_wdt_hw->bootstatus_get) {
+		ret = ltq_wdt_hw->bootstatus_get(dev);
+		if (ret >= 0)
+			wdt->bootstatus = ret;
+	}
 
-static int
-ltq_wdt_remove(struct platform_device *pdev)
-{
-	misc_deregister(&ltq_wdt_miscdev);
+	watchdog_set_nowayout(wdt, nowayout);
+	watchdog_init_timeout(wdt, 0, dev);
+
+	status = ltq_wdt_r32(priv, LTQ_WDT_SR);
+	if (status & LTQ_WDT_SR_EN) {
+		/*
+		 * If the watchdog is already running overwrite it with our
+		 * new settings. Stop is not needed as the start call will
+		 * replace all settings anyway.
+		 */
+		ltq_wdt_start(wdt);
+		set_bit(WDOG_HW_RUNNING, &wdt->status);
+	}
 
-	return 0;
+	return devm_watchdog_register_device(dev, wdt);
 }
 
+static const struct ltq_wdt_hw ltq_wdt_xrx100 = {
+	.bootstatus_get = ltq_wdt_xrx_bootstatus_get,
+};
+
+static const struct ltq_wdt_hw ltq_wdt_falcon = {
+	.bootstatus_get = ltq_wdt_falcon_bootstatus_get,
+};
+
 static const struct of_device_id ltq_wdt_match[] = {
-	{ .compatible = "lantiq,wdt", .data = NULL},
-	{ .compatible = "lantiq,xrx100-wdt", .data = ltq_wdt_bootstatus_xrx },
-	{ .compatible = "lantiq,falcon-wdt", .data = ltq_wdt_bootstatus_falcon },
+	{ .compatible = "lantiq,wdt", .data = NULL },
+	{ .compatible = "lantiq,xrx100-wdt", .data = &ltq_wdt_xrx100 },
+	{ .compatible = "lantiq,falcon-wdt", .data = &ltq_wdt_falcon },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ltq_wdt_match);
 
 static struct platform_driver ltq_wdt_driver = {
 	.probe = ltq_wdt_probe,
-	.remove = ltq_wdt_remove,
 	.driver = {
 		.name = "wdt",
 		.of_match_table = ltq_wdt_match,
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index aca2d6323f8a..069072e6747d 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -17,8 +17,6 @@
  * option) any later version.
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -49,6 +47,7 @@ struct mpc8xxx_wdt {
 struct mpc8xxx_wdt_type {
 	int prescaler;
 	bool hw_enabled;
+	u32 rsr_mask;
 };
 
 struct mpc8xxx_wdt_ddata {
@@ -137,36 +136,55 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
 	struct mpc8xxx_wdt_ddata *ddata;
 	u32 freq = fsl_get_sys_freq();
 	bool enabled;
+	struct device *dev = &ofdev->dev;
 
-	wdt_type = of_device_get_match_data(&ofdev->dev);
+	wdt_type = of_device_get_match_data(dev);
 	if (!wdt_type)
 		return -EINVAL;
 
 	if (!freq || freq == -1)
 		return -EINVAL;
 
-	ddata = devm_kzalloc(&ofdev->dev, sizeof(*ddata), GFP_KERNEL);
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
 
 	res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
-	ddata->base = devm_ioremap_resource(&ofdev->dev, res);
+	ddata->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(ddata->base))
 		return PTR_ERR(ddata->base);
 
 	enabled = in_be32(&ddata->base->swcrr) & SWCRR_SWEN;
 	if (!enabled && wdt_type->hw_enabled) {
-		pr_info("could not be enabled in software\n");
+		dev_info(dev, "could not be enabled in software\n");
 		return -ENODEV;
 	}
 
+	res = platform_get_resource(ofdev, IORESOURCE_MEM, 1);
+	if (res) {
+		bool status;
+		u32 __iomem *rsr = ioremap(res->start, resource_size(res));
+
+		if (!rsr)
+			return -ENOMEM;
+
+		status = in_be32(rsr) & wdt_type->rsr_mask;
+		ddata->wdd.bootstatus = status ? WDIOF_CARDRESET : 0;
+		 /* clear reset status bits related to watchdog timer */
+		out_be32(rsr, wdt_type->rsr_mask);
+		iounmap(rsr);
+
+		dev_info(dev, "Last boot was %scaused by watchdog\n",
+			 status ? "" : "not ");
+	}
+
 	spin_lock_init(&ddata->lock);
 
 	ddata->wdd.info = &mpc8xxx_wdt_info,
 	ddata->wdd.ops = &mpc8xxx_wdt_ops,
 
 	ddata->wdd.timeout = WATCHDOG_TIMEOUT;
-	watchdog_init_timeout(&ddata->wdd, timeout, &ofdev->dev);
+	watchdog_init_timeout(&ddata->wdd, timeout, dev);
 
 	watchdog_set_nowayout(&ddata->wdd, nowayout);
 
@@ -189,12 +207,13 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
 
 	ret = watchdog_register_device(&ddata->wdd);
 	if (ret) {
-		pr_err("cannot register watchdog device (err=%d)\n", ret);
+		dev_err(dev, "cannot register watchdog device (err=%d)\n", ret);
 		return ret;
 	}
 
-	pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d sec\n",
-		reset ? "reset" : "interrupt", ddata->wdd.timeout);
+	dev_info(dev,
+		 "WDT driver for MPC8xxx initialized. mode:%s timeout=%d sec\n",
+		 reset ? "reset" : "interrupt", ddata->wdd.timeout);
 
 	platform_set_drvdata(ofdev, ddata);
 	return 0;
@@ -204,8 +223,8 @@ static int mpc8xxx_wdt_remove(struct platform_device *ofdev)
 {
 	struct mpc8xxx_wdt_ddata *ddata = platform_get_drvdata(ofdev);
 
-	pr_crit("Watchdog removed, expect the %s soon!\n",
-		reset ? "reset" : "machine check exception");
+	dev_crit(&ofdev->dev, "Watchdog removed, expect the %s soon!\n",
+		 reset ? "reset" : "machine check exception");
 	watchdog_unregister_device(&ddata->wdd);
 
 	return 0;
@@ -216,6 +235,7 @@ static const struct of_device_id mpc8xxx_wdt_match[] = {
 		.compatible = "mpc83xx_wdt",
 		.data = &(struct mpc8xxx_wdt_type) {
 			.prescaler = 0x10000,
+			.rsr_mask = BIT(3), /* RSR Bit SWRS */
 		},
 	},
 	{
@@ -223,6 +243,7 @@ static const struct of_device_id mpc8xxx_wdt_match[] = {
 		.data = &(struct mpc8xxx_wdt_type) {
 			.prescaler = 0x10000,
 			.hw_enabled = true,
+			.rsr_mask = BIT(20), /* RSTRSCR Bit WDT_RR */
 		},
 	},
 	{
@@ -230,6 +251,7 @@ static const struct of_device_id mpc8xxx_wdt_match[] = {
 		.data = &(struct mpc8xxx_wdt_type) {
 			.prescaler = 0x800,
 			.hw_enabled = true,
+			.rsr_mask = BIT(28), /* RSR Bit SWRS */
 		},
 	},
 	{},
diff --git a/drivers/watchdog/renesas_wdt.c b/drivers/watchdog/renesas_wdt.c
index 88d81feba4e6..0d74c3e48979 100644
--- a/drivers/watchdog/renesas_wdt.c
+++ b/drivers/watchdog/renesas_wdt.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Watchdog driver for Renesas WDT watchdog
  *
  * Copyright (C) 2015-17 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
  * Copyright (C) 2015-17 Renesas Electronics Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
  */
 #include <linux/bitops.h>
 #include <linux/clk.h>
@@ -234,6 +231,7 @@ static int rwdt_probe(struct platform_device *pdev)
 	watchdog_set_drvdata(&priv->wdev, priv);
 	watchdog_set_nowayout(&priv->wdev, nowayout);
 	watchdog_set_restart_priority(&priv->wdev, 0);
+	watchdog_stop_on_unregister(&priv->wdev);
 
 	/* This overrides the default timeout only if DT configuration was found */
 	ret = watchdog_init_timeout(&priv->wdev, 0, &pdev->dev);
diff --git a/drivers/watchdog/rza_wdt.c b/drivers/watchdog/rza_wdt.c
index e618218d2374..781bb572e6af 100644
--- a/drivers/watchdog/rza_wdt.c
+++ b/drivers/watchdog/rza_wdt.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Renesas RZ/A Series WDT Driver
  *
  * Copyright (C) 2017 Renesas Electronics America, Inc.
  * Copyright (C) 2017 Chris Brandt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
  */
 
 #include <linux/bitops.h>
@@ -14,6 +11,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 
@@ -34,12 +32,45 @@
 #define WRCSR_RSTE		BIT(6)
 #define WRCSR_CLEAR_WOVF	0xA500	/* special value */
 
+/* The maximum CKS register setting value to get the longest timeout */
+#define CKS_3BIT		0x7
+#define CKS_4BIT		0xF
+
+#define DIVIDER_3BIT		16384	/* Clock divider when CKS = 0x7 */
+#define DIVIDER_4BIT		4194304	/* Clock divider when CKS = 0xF */
+
 struct rza_wdt {
 	struct watchdog_device wdev;
 	void __iomem *base;
 	struct clk *clk;
+	u8 count;
+	u8 cks;
 };
 
+static void rza_wdt_calc_timeout(struct rza_wdt *priv, int timeout)
+{
+	unsigned long rate = clk_get_rate(priv->clk);
+	unsigned int ticks;
+
+	if (priv->cks == CKS_4BIT) {
+		ticks = DIV_ROUND_UP(timeout * rate, DIVIDER_4BIT);
+
+		/*
+		 * Since max_timeout was set in probe, we know that the timeout
+		 * value passed will never calculate to a tick value greater
+		 * than 256.
+		 */
+		priv->count = 256 - ticks;
+
+	} else {
+		/* Start timer with longest timeout */
+		priv->count = 0;
+	}
+
+	pr_debug("%s: timeout set to %u (WTCNT=%d)\n", __func__,
+		 timeout, priv->count);
+}
+
 static int rza_wdt_start(struct watchdog_device *wdev)
 {
 	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
@@ -51,13 +82,12 @@ static int rza_wdt_start(struct watchdog_device *wdev)
 	readb(priv->base + WRCSR);
 	writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
 
-	/*
-	 * Start timer with slowest clock source and reset option enabled.
-	 */
+	rza_wdt_calc_timeout(priv, wdev->timeout);
+
 	writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
-	writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
-	writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME | WTSCR_CKS(7),
-	       priv->base + WTCSR);
+	writew(WTCNT_MAGIC | priv->count, priv->base + WTCNT);
+	writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME |
+	       WTSCR_CKS(priv->cks), priv->base + WTCSR);
 
 	return 0;
 }
@@ -75,8 +105,17 @@ static int rza_wdt_ping(struct watchdog_device *wdev)
 {
 	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
 
-	writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
+	writew(WTCNT_MAGIC | priv->count, priv->base + WTCNT);
+
+	pr_debug("%s: timeout = %u\n", __func__, wdev->timeout);
+
+	return 0;
+}
 
+static int rza_set_timeout(struct watchdog_device *wdev, unsigned int timeout)
+{
+	wdev->timeout = timeout;
+	rza_wdt_start(wdev);
 	return 0;
 }
 
@@ -121,6 +160,7 @@ static const struct watchdog_ops rza_wdt_ops = {
 	.start = rza_wdt_start,
 	.stop = rza_wdt_stop,
 	.ping = rza_wdt_ping,
+	.set_timeout = rza_set_timeout,
 	.restart = rza_wdt_restart,
 };
 
@@ -150,20 +190,28 @@ static int rza_wdt_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	/* Assume slowest clock rate possible (CKS=7) */
-	rate /= 16384;
-
 	priv->wdev.info = &rza_wdt_ident,
 	priv->wdev.ops = &rza_wdt_ops,
 	priv->wdev.parent = &pdev->dev;
 
-	/*
-	 * Since the max possible timeout of our 8-bit count register is less
-	 * than a second, we must use max_hw_heartbeat_ms.
-	 */
-	priv->wdev.max_hw_heartbeat_ms = (1000 * U8_MAX) / rate;
-	dev_dbg(&pdev->dev, "max hw timeout of %dms\n",
-		 priv->wdev.max_hw_heartbeat_ms);
+	priv->cks = (u8)(uintptr_t)of_device_get_match_data(&pdev->dev);
+	if (priv->cks == CKS_4BIT) {
+		/* Assume slowest clock rate possible (CKS=0xF) */
+		priv->wdev.max_timeout = (DIVIDER_4BIT * U8_MAX) / rate;
+
+	} else if (priv->cks == CKS_3BIT) {
+		/* Assume slowest clock rate possible (CKS=7) */
+		rate /= DIVIDER_3BIT;
+
+		/*
+		 * Since the max possible timeout of our 8-bit count
+		 * register is less than a second, we must use
+		 * max_hw_heartbeat_ms.
+		 */
+		priv->wdev.max_hw_heartbeat_ms = (1000 * U8_MAX) / rate;
+		dev_dbg(&pdev->dev, "max hw timeout of %dms\n",
+			 priv->wdev.max_hw_heartbeat_ms);
+	}
 
 	priv->wdev.min_timeout = 1;
 	priv->wdev.timeout = DEFAULT_TIMEOUT;
@@ -179,7 +227,8 @@ static int rza_wdt_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id rza_wdt_of_match[] = {
-	{ .compatible = "renesas,rza-wdt", },
+	{ .compatible = "renesas,r7s9210-wdt",	.data = (void *)CKS_4BIT, },
+	{ .compatible = "renesas,rza-wdt",	.data = (void *)CKS_3BIT, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, rza_wdt_of_match);
diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
index 255169916dbb..1e93c1b0e3cf 100644
--- a/drivers/watchdog/sama5d4_wdt.c
+++ b/drivers/watchdog/sama5d4_wdt.c
@@ -247,11 +247,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = watchdog_init_timeout(wdd, wdt_timeout, &pdev->dev);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to set timeout value\n");
-		return ret;
-	}
+	watchdog_init_timeout(wdd, wdt_timeout, &pdev->dev);
 
 	timeout = WDT_SEC2TICKS(wdd->timeout);
 
diff --git a/drivers/watchdog/ts4800_wdt.c b/drivers/watchdog/ts4800_wdt.c
index 2b8de8602b67..89843b16b04a 100644
--- a/drivers/watchdog/ts4800_wdt.c
+++ b/drivers/watchdog/ts4800_wdt.c
@@ -135,6 +135,7 @@ static int ts4800_wdt_probe(struct platform_device *pdev)
 	/* set regmap and offset to know where to write */
 	wdt->feed_offset = reg;
 	wdt->regmap = syscon_node_to_regmap(syscon_np);
+	of_node_put(syscon_np);
 	if (IS_ERR(wdt->regmap)) {
 		dev_err(&pdev->dev, "cannot get parent's regmap\n");
 		return PTR_ERR(wdt->regmap);
diff --git a/drivers/watchdog/via_wdt.c b/drivers/watchdog/via_wdt.c
index b085ef1084ec..d56d0a927a1e 100644
--- a/drivers/watchdog/via_wdt.c
+++ b/drivers/watchdog/via_wdt.c
@@ -30,7 +30,7 @@
 #define VIA_WDT_CONF_MMIO	0x02	/* 1: enable watchdog MMIO */
 
 /*
- * The MMIO region contains the watchog control register and the
+ * The MMIO region contains the watchdog control register and the
  * hardware timer counter.
  */
 #define VIA_WDT_MMIO_LEN	8	/* MMIO region length in bytes */
@@ -82,7 +82,7 @@ static inline void wdt_reset(void)
 /*
  * Timer tick: the timer will make sure that the watchdog timer hardware
  * is being reset in time. The conditions to do this are:
- *  1) the watchog timer has been started and /dev/watchdog is open
+ *  1) the watchdog timer has been started and /dev/watchdog is open
  *     and there is still time left before userspace should send the
  *     next heartbeat/ping. (note: the internal heartbeat is much smaller
  *     then the external/userspace heartbeat).
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 7817836bff55..4b9365d4de7a 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -50,7 +50,7 @@ static int cr_wdt_csr;		/* WDT control & status register */
 enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
 	     w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
 	     w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
-	     nct6795, nct6102 };
+	     nct6795, nct6796, nct6102 };
 
 static int timeout;			/* in seconds */
 module_param(timeout, int, 0);
@@ -100,6 +100,7 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
 #define NCT6792_ID		0xc9
 #define NCT6793_ID		0xd1
 #define NCT6795_ID		0xd3
+#define NCT6796_ID		0xd4	/* also NCT9697D, NCT9698D */
 
 #define W83627HF_WDT_TIMEOUT	0xf6
 #define W83697HF_WDT_TIMEOUT	0xf4
@@ -209,6 +210,7 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
 	case nct6792:
 	case nct6793:
 	case nct6795:
+	case nct6796:
 	case nct6102:
 		/*
 		 * These chips have a fixed WDTO# output pin (W83627UHG),
@@ -407,6 +409,9 @@ static int wdt_find(int addr)
 	case NCT6795_ID:
 		ret = nct6795;
 		break;
+	case NCT6796_ID:
+		ret = nct6796;
+		break;
 	case NCT6102_ID:
 		ret = nct6102;
 		cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
@@ -450,6 +455,7 @@ static int __init wdt_init(void)
 		"NCT6792",
 		"NCT6793",
 		"NCT6795",
+		"NCT6796",
 		"NCT6102",
 	};
 
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index ffbdc4642ea5..f6c24b22b37c 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -1019,16 +1019,16 @@ static void watchdog_cdev_unregister(struct watchdog_device *wdd)
 		old_wd_data = NULL;
 	}
 
-	mutex_lock(&wd_data->lock);
-	wd_data->wdd = NULL;
-	wdd->wd_data = NULL;
-	mutex_unlock(&wd_data->lock);
-
 	if (watchdog_active(wdd) &&
 	    test_bit(WDOG_STOP_ON_UNREGISTER, &wdd->status)) {
 		watchdog_stop(wdd);
 	}
 
+	mutex_lock(&wd_data->lock);
+	wd_data->wdd = NULL;
+	wdd->wd_data = NULL;
+	mutex_unlock(&wd_data->lock);
+
 	hrtimer_cancel(&wd_data->timer);
 	kthread_cancel_work_sync(&wd_data->work);