1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
|
Qualcomm I2C controller
Required properties:
- reg : Offset and length of the register region for the device named in
reg-names and has the same index.
- reg-names : Register region name(s) referenced in reg above
"qup_phys_addr" : Physical address of QUP register space.
- compatible : should be "qcom,i2c-msm-v2"
- interrupts : Interrupt number which correspond to the entry with the same
index in interrupt-names.
- interrupt-names: QUP core interrupt name(s) referenced in interrupts above
"qup_irq" : QUP interrupt used by the controller.
- dmas : DMA engine API's parameters for blsp.
<[phandle of the dma controller] [pipe index] [number of descriptors]
[sps_connect flags] [sps_register_event flags]>;
- dma-names : dma channel names.
- qcom,clk-freq-out : Desired I2C bus clock frequency in Hz
- qcom,clk-freq-in : Supplied core clock frequency in Hz.
Required alias:
- The desired bus-number is specified by an alias with the following format:
'i2c{n}' where n is the bus number.
Optional property:
- qcom,noise-rjct-scl : number of low samples on clock line to consider it low.
When missing default to 0.
- qcom,noise-rjct-sda : number of low samples on data line to consider it low.
When missing default to 0.
- qcom,disable-dma : disables DMA transfer mode.
- qcom,master-id : Master-port value used on voting for the clock path.
- qcom,high-time-clk-div : high time divider value to configure clk-ctl
register. When missing, default to the value given in driver.
- qcom,fs-clk-div: fs divider value to configure clk-ctl register. When
missing, default to the value given in driver.
Example:
aliases {
i2c10 = &i2c_10;
};
i2c_10: i2c@f9966000 {
compatible = "qcom,i2c-msm-v2";
reg-names = "qup_phys_addr", "dma_phys_addr";
reg = <0xf9966000 0x1000>;
interrupt-names = "qup_irq";
interrupts = <0 104 0>;
dmas = <&dma_blsp1 14 32 0x20000020 0x20>,
<&dma_blsp1 15 64 0x20000020 0x20>;
dma-names = "tx", "rx";
qcom,clk-freq-out = <100000>;
qcom,clk-freq-in = <24000000>;
qcom,noise-rjct-scl = <0>;
qcom,noise-rjct-sda = <0>;
};
|
