Update to commit 69e273c0b0a3c337a521d083374c918dc52c666f from repo file:///media/arthur/arthur-usb3/linaro/qa/in-kernel-test/git/linux-stablelinux-stable

55 files changed, 2629 insertions, 352 deletions

diff --git a/Makefile b/Makefile
index e66e710..36ff2e4 100644
--- a/Makefile
+++ b/Makefile
@@ -2,8 +2,10 @@ TARGETS = breakpoints
 TARGETS += cpu-hotplug
 TARGETS += efivarfs
 TARGETS += kcmp
+TARGETS += memfd
 TARGETS += memory-hotplug
 TARGETS += mqueue
+TARGETS += mount
 TARGETS += net
 TARGETS += ptrace
 TARGETS += timers
@@ -11,6 +13,10 @@ TARGETS += vm
 TARGETS += powerpc
 TARGETS += user
 TARGETS += sysctl
+TARGETS += firmware
+
+TARGETS_HOTPLUG = cpu-hotplug
+TARGETS_HOTPLUG += memory-hotplug
 
 all:
 	for TARGET in $(TARGETS); do \
@@ -22,6 +28,21 @@ run_tests: all
 		make -C $$TARGET run_tests; \
 	done;
 
+hotplug:
+	for TARGET in $(TARGETS_HOTPLUG); do \
+		make -C $$TARGET; \
+	done;
+
+run_hotplug: hotplug
+	for TARGET in $(TARGETS_HOTPLUG); do \
+		make -C $$TARGET run_full_test; \
+	done;
+
+clean_hotplug:
+	for TARGET in $(TARGETS_HOTPLUG); do \
+		make -C $$TARGET clean; \
+	done;
+
 clean:
 	for TARGET in $(TARGETS); do \
 		make -C $$TARGET clean; \
diff --git a/README.txt b/README.txt
index 5e2faf9..2660d5f 100644
--- a/README.txt
+++ b/README.txt
@@ -4,8 +4,15 @@ The kernel contains a set of "self tests" under the tools/testing/selftests/
 directory. These are intended to be small unit tests to exercise individual
 code paths in the kernel.
 
-Running the selftests
-=====================
+On some systems, hot-plug tests could hang forever waiting for cpu and
+memory to be ready to be offlined. A special hot-plug target is created
+to run full range of hot-plug tests. In default mode, hot-plug tests run
+in safe mode with a limited scope. In limited mode, cpu-hotplug test is
+run on a single cpu as opposed to all hotplug capable cpus, and memory
+hotplug test is run on 2% of hotplug capable memory instead of 10%.
+
+Running the selftests (hotplug tests are run in limited mode)
+=============================================================
 
 To build the tests:
 
@@ -18,14 +25,26 @@ To run the tests:
 
 - note that some tests will require root privileges.
 
-
-To run only tests targetted for a single subsystem:
+To run only tests targeted for a single subsystem: (including
+hotplug targets in limited mode)
 
   $  make -C tools/testing/selftests TARGETS=cpu-hotplug run_tests
 
 See the top-level tools/testing/selftests/Makefile for the list of all possible
 targets.
 
+Running the full range hotplug selftests
+========================================
+
+To build the tests:
+
+  $ make -C tools/testing/selftests hotplug
+
+To run the tests:
+
+  $ make -C tools/testing/selftests run_hotplug
+
+- note that some tests will require root privileges.
 
 Contributing new tests
 ======================
diff --git a/cpu-hotplug/Makefile b/cpu-hotplug/Makefile
index 790c23a..e9c28d8 100644
--- a/cpu-hotplug/Makefile
+++ b/cpu-hotplug/Makefile
@@ -3,4 +3,7 @@ all:
 run_tests:
 	@/bin/bash ./on-off-test.sh || echo "cpu-hotplug selftests: [FAIL]"
 
+run_full_test:
+	@/bin/bash ./on-off-test.sh -a || echo "cpu-hotplug selftests: [FAIL]"
+
 clean:
diff --git a/cpu-hotplug/on-off-test.sh b/cpu-hotplug/on-off-test.sh
index bdde7cf..98b1d65 100644
--- a/cpu-hotplug/on-off-test.sh
+++ b/cpu-hotplug/on-off-test.sh
@@ -11,6 +11,8 @@ prerequisite()
 		exit 0
 	fi
 
+	taskset -p 01 $$
+
 	SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'`
 
 	if [ ! -d "$SYSFS" ]; then
@@ -22,6 +24,19 @@ prerequisite()
 		echo $msg cpu hotplug is not supported >&2
 		exit 0
 	fi
+
+	echo "CPU online/offline summary:"
+	online_cpus=`cat $SYSFS/devices/system/cpu/online`
+	online_max=${online_cpus##*-}
+	echo -e "\t Cpus in online state: $online_cpus"
+
+	offline_cpus=`cat $SYSFS/devices/system/cpu/offline`
+	if [[ "a$offline_cpus" = "a" ]]; then
+		offline_cpus=0
+	else
+		offline_max=${offline_cpus##*-}
+	fi
+	echo -e "\t Cpus in offline state: $offline_cpus"
 }
 
 #
@@ -113,15 +128,25 @@ offline_cpu_expect_fail()
 }
 
 error=-12
+allcpus=0
 priority=0
+online_cpus=0
+online_max=0
+offline_cpus=0
+offline_max=0
 
-while getopts e:hp: opt; do
+while getopts e:ahp: opt; do
 	case $opt in
 	e)
 		error=$OPTARG
 		;;
+	a)
+		allcpus=1
+		;;
 	h)
-		echo "Usage $0 [ -e errno ] [ -p notifier-priority ]"
+		echo "Usage $0 [ -a ] [ -e errno ] [ -p notifier-priority ]"
+		echo -e "\t default offline one cpu"
+		echo -e "\t run with -a option to offline all cpus"
 		exit
 		;;
 	p)
@@ -138,6 +163,29 @@ fi
 prerequisite
 
 #
+# Safe test (default) - offline and online one cpu
+#
+if [ $allcpus -eq 0 ]; then
+	echo "Limited scope test: one hotplug cpu"
+	echo -e "\t (leaves cpu in the original state):"
+	echo -e "\t online to offline to online: cpu $online_max"
+	offline_cpu_expect_success $online_max
+	online_cpu_expect_success $online_max
+
+	if [[ $offline_cpus -gt 0 ]]; then
+		echo -e "\t offline to online to offline: cpu $offline_max"
+		online_cpu_expect_success $offline_max
+		offline_cpu_expect_success $offline_max
+	fi
+	exit 0
+else
+	echo "Full scope test: all hotplug cpus"
+	echo -e "\t online all offline cpus"
+	echo -e "\t offline all online cpus"
+	echo -e "\t online all offline cpus"
+fi
+
+#
 # Online all hot-pluggable CPUs
 #
 for cpu in `hotplaggable_offline_cpus`; do
diff --git a/firmware/Makefile b/firmware/Makefile
new file mode 100644
index 0000000..e23cce0
--- /dev/null
+++ b/firmware/Makefile
@@ -0,0 +1,27 @@
+# Makefile for firmware loading selftests
+
+# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
+all:
+
+fw_filesystem:
+	@if /bin/sh ./fw_filesystem.sh ; then \
+                echo "fw_filesystem: ok"; \
+        else \
+                echo "fw_filesystem: [FAIL]"; \
+                exit 1; \
+        fi
+
+fw_userhelper:
+	@if /bin/sh ./fw_userhelper.sh ; then \
+                echo "fw_userhelper: ok"; \
+        else \
+                echo "fw_userhelper: [FAIL]"; \
+                exit 1; \
+        fi
+
+run_tests: all fw_filesystem fw_userhelper
+
+# Nothing to clean up.
+clean:
+
+.PHONY: all clean run_tests fw_filesystem fw_userhelper
diff --git a/firmware/fw_filesystem.sh b/firmware/fw_filesystem.sh
new file mode 100644
index 0000000..3fc6c10
--- /dev/null
+++ b/firmware/fw_filesystem.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+# This validates that the kernel will load firmware out of its list of
+# firmware locations on disk. Since the user helper does similar work,
+# we reset the custom load directory to a location the user helper doesn't
+# know so we can be sure we're not accidentally testing the user helper.
+set -e
+
+modprobe test_firmware
+
+DIR=/sys/devices/virtual/misc/test_firmware
+
+OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
+OLD_FWPATH=$(cat /sys/module/firmware_class/parameters/path)
+
+FWPATH=$(mktemp -d)
+FW="$FWPATH/test-firmware.bin"
+
+test_finish()
+{
+	echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
+	echo -n "$OLD_PATH" >/sys/module/firmware_class/parameters/path
+	rm -f "$FW"
+	rmdir "$FWPATH"
+}
+
+trap "test_finish" EXIT
+
+# Turn down the timeout so failures don't take so long.
+echo 1 >/sys/class/firmware/timeout
+# Set the kernel search path.
+echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
+
+# This is an unlikely real-world firmware content. :)
+echo "ABCD0123" >"$FW"
+
+NAME=$(basename "$FW")
+
+# Request a firmware that doesn't exist, it should fail.
+echo -n "nope-$NAME" >"$DIR"/trigger_request
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+	echo "$0: firmware was not expected to match" >&2
+	exit 1
+else
+	echo "$0: timeout works"
+fi
+
+# This should succeed via kernel load or will fail after 1 second after
+# being handed over to the user helper, which won't find the fw either.
+if ! echo -n "$NAME" >"$DIR"/trigger_request ; then
+	echo "$0: could not trigger request" >&2
+	exit 1
+fi
+
+# Verify the contents are what we expect.
+if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+	echo "$0: firmware was not loaded" >&2
+	exit 1
+else
+	echo "$0: filesystem loading works"
+fi
+
+exit 0
diff --git a/firmware/fw_userhelper.sh b/firmware/fw_userhelper.sh
new file mode 100644
index 0000000..6efbade
--- /dev/null
+++ b/firmware/fw_userhelper.sh
@@ -0,0 +1,89 @@
+#!/bin/sh
+# This validates that the kernel will fall back to using the user helper
+# to load firmware it can't find on disk itself. We must request a firmware
+# that the kernel won't find, and any installed helper (e.g. udev) also
+# won't find so that we can do the load ourself manually.
+set -e
+
+modprobe test_firmware
+
+DIR=/sys/devices/virtual/misc/test_firmware
+
+OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
+
+FWPATH=$(mktemp -d)
+FW="$FWPATH/test-firmware.bin"
+
+test_finish()
+{
+	echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
+	rm -f "$FW"
+	rmdir "$FWPATH"
+}
+
+load_fw()
+{
+	local name="$1"
+	local file="$2"
+
+	# This will block until our load (below) has finished.
+	echo -n "$name" >"$DIR"/trigger_request &
+
+	# Give kernel a chance to react.
+	local timeout=10
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "$0: firmware interface never appeared" >&2
+			exit 1
+		fi
+	done
+
+	echo 1 >"$DIR"/"$name"/loading
+	cat "$file" >"$DIR"/"$name"/data
+	echo 0 >"$DIR"/"$name"/loading
+
+	# Wait for request to finish.
+	wait
+}
+
+trap "test_finish" EXIT
+
+# This is an unlikely real-world firmware content. :)
+echo "ABCD0123" >"$FW"
+NAME=$(basename "$FW")
+
+# Test failure when doing nothing (timeout works).
+echo 1 >/sys/class/firmware/timeout
+echo -n "$NAME" >"$DIR"/trigger_request
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+	echo "$0: firmware was not expected to match" >&2
+	exit 1
+else
+	echo "$0: timeout works"
+fi
+
+# Put timeout high enough for us to do work but not so long that failures
+# slow down this test too much.
+echo 4 >/sys/class/firmware/timeout
+
+# Load this script instead of the desired firmware.
+load_fw "$NAME" "$0"
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+	echo "$0: firmware was not expected to match" >&2
+	exit 1
+else
+	echo "$0: firmware comparison works"
+fi
+
+# Do a proper load, which should work correctly.
+load_fw "$NAME" "$FW"
+if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+	echo "$0: firmware was not loaded" >&2
+	exit 1
+else
+	echo "$0: user helper firmware loading works"
+fi
+
+exit 0
diff --git a/ipc/Makefile b/ipc/Makefile
index 5386fd7..74bbefd 100644
--- a/ipc/Makefile
+++ b/ipc/Makefile
@@ -1,18 +1,18 @@
 uname_M := $(shell uname -m 2>/dev/null || echo not)
 ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
 ifeq ($(ARCH),i386)
-        ARCH := X86
+        ARCH := x86
 	CFLAGS := -DCONFIG_X86_32 -D__i386__
 endif
 ifeq ($(ARCH),x86_64)
-	ARCH := X86
+	ARCH := x86
 	CFLAGS := -DCONFIG_X86_64 -D__x86_64__
 endif
 
 CFLAGS += -I../../../../usr/include/
 
 all:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
 	gcc $(CFLAGS) msgque.c -o msgque_test
 else
 	echo "Not an x86 target, can't build msgque selftest"
diff --git a/kcmp/Makefile b/kcmp/Makefile
index d7d6bbe..8aabd82 100644
--- a/kcmp/Makefile
+++ b/kcmp/Makefile
@@ -1,11 +1,11 @@
 uname_M := $(shell uname -m 2>/dev/null || echo not)
 ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
 ifeq ($(ARCH),i386)
-        ARCH := X86
+        ARCH := x86
 	CFLAGS := -DCONFIG_X86_32 -D__i386__
 endif
 ifeq ($(ARCH),x86_64)
-	ARCH := X86
+	ARCH := x86
 	CFLAGS := -DCONFIG_X86_64 -D__x86_64__
 endif
 
@@ -15,7 +15,7 @@ CFLAGS += -I../../../../usr/include/
 CFLAGS += -I../../../../arch/x86/include/
 
 all:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
 	gcc $(CFLAGS) kcmp_test.c -o kcmp_test
 else
 	echo "Not an x86 target, can't build kcmp selftest"
diff --git a/kcmp/kcmp_test.c b/kcmp/kcmp_test.c
index fa4f1b3..dbba408 100644
--- a/kcmp/kcmp_test.c
+++ b/kcmp/kcmp_test.c
@@ -81,7 +81,7 @@ int main(int argc, char **argv)
 		/* Compare with self */
 		ret = sys_kcmp(pid1, pid1, KCMP_VM, 0, 0);
 		if (ret) {
-			printf("FAIL: 0 expected but %li returned (%s)\n",
+			printf("FAIL: 0 expected but %d returned (%s)\n",
 				ret, strerror(errno));
 			ret = -1;
 		} else
diff --git a/memfd/.gitignore b/memfd/.gitignore
new file mode 100644
index 0000000..afe87c4
--- /dev/null
+++ b/memfd/.gitignore
@@ -0,0 +1,4 @@
+fuse_mnt
+fuse_test
+memfd_test
+memfd-test-file
diff --git a/memfd/Makefile b/memfd/Makefile
new file mode 100644
index 0000000..ad4ab01
--- /dev/null
+++ b/memfd/Makefile
@@ -0,0 +1,41 @@
+uname_M := $(shell uname -m 2>/dev/null || echo not)
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
+ifeq ($(ARCH),i386)
+	ARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+	ARCH := x86
+endif
+
+CFLAGS += -D_FILE_OFFSET_BITS=64
+CFLAGS += -I../../../../arch/x86/include/generated/uapi/
+CFLAGS += -I../../../../arch/x86/include/uapi/
+CFLAGS += -I../../../../include/uapi/
+CFLAGS += -I../../../../include/
+
+all:
+ifeq ($(ARCH),x86)
+	gcc $(CFLAGS) memfd_test.c -o memfd_test
+else
+	echo "Not an x86 target, can't build memfd selftest"
+endif
+
+run_tests: all
+ifeq ($(ARCH),x86)
+	gcc $(CFLAGS) memfd_test.c -o memfd_test
+endif
+	@./memfd_test || echo "memfd_test: [FAIL]"
+
+build_fuse:
+ifeq ($(ARCH),x86)
+	gcc $(CFLAGS) fuse_mnt.c `pkg-config fuse --cflags --libs` -o fuse_mnt
+	gcc $(CFLAGS) fuse_test.c -o fuse_test
+else
+	echo "Not an x86 target, can't build memfd selftest"
+endif
+
+run_fuse: build_fuse
+	@./run_fuse_test.sh || echo "fuse_test: [FAIL]"
+
+clean:
+	$(RM) memfd_test fuse_test
diff --git a/memfd/fuse_mnt.c b/memfd/fuse_mnt.c
new file mode 100644
index 0000000..feacf12
--- /dev/null
+++ b/memfd/fuse_mnt.c
@@ -0,0 +1,110 @@
+/*
+ * memfd test file-system
+ * This file uses FUSE to create a dummy file-system with only one file /memfd.
+ * This file is read-only and takes 1s per read.
+ *
+ * This file-system is used by the memfd test-cases to force the kernel to pin
+ * pages during reads(). Due to the 1s delay of this file-system, this is a
+ * nice way to test race-conditions against get_user_pages() in the kernel.
+ *
+ * We use direct_io==1 to force the kernel to use direct-IO for this
+ * file-system.
+ */
+
+#define FUSE_USE_VERSION 26
+
+#include <fuse.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+static const char memfd_content[] = "memfd-example-content";
+static const char memfd_path[] = "/memfd";
+
+static int memfd_getattr(const char *path, struct stat *st)
+{
+	memset(st, 0, sizeof(*st));
+
+	if (!strcmp(path, "/")) {
+		st->st_mode = S_IFDIR | 0755;
+		st->st_nlink = 2;
+	} else if (!strcmp(path, memfd_path)) {
+		st->st_mode = S_IFREG | 0444;
+		st->st_nlink = 1;
+		st->st_size = strlen(memfd_content);
+	} else {
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+static int memfd_readdir(const char *path,
+			 void *buf,
+			 fuse_fill_dir_t filler,
+			 off_t offset,
+			 struct fuse_file_info *fi)
+{
+	if (strcmp(path, "/"))
+		return -ENOENT;
+
+	filler(buf, ".", NULL, 0);
+	filler(buf, "..", NULL, 0);
+	filler(buf, memfd_path + 1, NULL, 0);
+
+	return 0;
+}
+
+static int memfd_open(const char *path, struct fuse_file_info *fi)
+{
+	if (strcmp(path, memfd_path))
+		return -ENOENT;
+
+	if ((fi->flags & 3) != O_RDONLY)
+		return -EACCES;
+
+	/* force direct-IO */
+	fi->direct_io = 1;
+
+	return 0;
+}
+
+static int memfd_read(const char *path,
+		      char *buf,
+		      size_t size,
+		      off_t offset,
+		      struct fuse_file_info *fi)
+{
+	size_t len;
+
+	if (strcmp(path, memfd_path) != 0)
+		return -ENOENT;
+
+	sleep(1);
+
+	len = strlen(memfd_content);
+	if (offset < len) {
+		if (offset + size > len)
+			size = len - offset;
+
+		memcpy(buf, memfd_content + offset, size);
+	} else {
+		size = 0;
+	}
+
+	return size;
+}
+
+static struct fuse_operations memfd_ops = {
+	.getattr	= memfd_getattr,
+	.readdir	= memfd_readdir,
+	.open		= memfd_open,
+	.read		= memfd_read,
+};
+
+int main(int argc, char *argv[])
+{
+	return fuse_main(argc, argv, &memfd_ops, NULL);
+}
diff --git a/memfd/fuse_test.c b/memfd/fuse_test.c
new file mode 100644
index 0000000..67908b1
--- /dev/null
+++ b/memfd/fuse_test.c
@@ -0,0 +1,311 @@
+/*
+ * memfd GUP test-case
+ * This tests memfd interactions with get_user_pages(). We require the
+ * fuse_mnt.c program to provide a fake direct-IO FUSE mount-point for us. This
+ * file-system delays _all_ reads by 1s and forces direct-IO. This means, any
+ * read() on files in that file-system will pin the receive-buffer pages for at
+ * least 1s via get_user_pages().
+ *
+ * We use this trick to race ADD_SEALS against a write on a memfd object. The
+ * ADD_SEALS must fail if the memfd pages are still pinned. Note that we use
+ * the read() syscall with our memory-mapped memfd object as receive buffer to
+ * force the kernel to write into our memfd object.
+ */
+
+#define _GNU_SOURCE
+#define __EXPORTED_HEADERS__
+
+#include <errno.h>
+#include <inttypes.h>
+#include <limits.h>
+#include <linux/falloc.h>
+#include <linux/fcntl.h>
+#include <linux/memfd.h>
+#include <sched.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/syscall.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#define MFD_DEF_SIZE 8192
+#define STACK_SIZE 65535
+
+static int sys_memfd_create(const char *name,
+			    unsigned int flags)
+{
+	return syscall(__NR_memfd_create, name, flags);
+}
+
+static int mfd_assert_new(const char *name, loff_t sz, unsigned int flags)
+{
+	int r, fd;
+
+	fd = sys_memfd_create(name, flags);
+	if (fd < 0) {
+		printf("memfd_create(\"%s\", %u) failed: %m\n",
+		       name, flags);
+		abort();
+	}
+
+	r = ftruncate(fd, sz);
+	if (r < 0) {
+		printf("ftruncate(%llu) failed: %m\n", (unsigned long long)sz);
+		abort();
+	}
+
+	return fd;
+}
+
+static __u64 mfd_assert_get_seals(int fd)
+{
+	long r;
+
+	r = fcntl(fd, F_GET_SEALS);
+	if (r < 0) {
+		printf("GET_SEALS(%d) failed: %m\n", fd);
+		abort();
+	}
+
+	return r;
+}
+
+static void mfd_assert_has_seals(int fd, __u64 seals)
+{
+	__u64 s;
+
+	s = mfd_assert_get_seals(fd);
+	if (s != seals) {
+		printf("%llu != %llu = GET_SEALS(%d)\n",
+		       (unsigned long long)seals, (unsigned long long)s, fd);
+		abort();
+	}
+}
+
+static void mfd_assert_add_seals(int fd, __u64 seals)
+{
+	long r;
+	__u64 s;
+
+	s = mfd_assert_get_seals(fd);
+	r = fcntl(fd, F_ADD_SEALS, seals);
+	if (r < 0) {
+		printf("ADD_SEALS(%d, %llu -> %llu) failed: %m\n",
+		       fd, (unsigned long long)s, (unsigned long long)seals);
+		abort();
+	}
+}
+
+static int mfd_busy_add_seals(int fd, __u64 seals)
+{
+	long r;
+	__u64 s;
+
+	r = fcntl(fd, F_GET_SEALS);
+	if (r < 0)
+		s = 0;
+	else
+		s = r;
+
+	r = fcntl(fd, F_ADD_SEALS, seals);
+	if (r < 0 && errno != EBUSY) {
+		printf("ADD_SEALS(%d, %llu -> %llu) didn't fail as expected with EBUSY: %m\n",
+		       fd, (unsigned long long)s, (unsigned long long)seals);
+		abort();
+	}
+
+	return r;
+}
+
+static void *mfd_assert_mmap_shared(int fd)
+{
+	void *p;
+
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ | PROT_WRITE,
+		 MAP_SHARED,
+		 fd,
+		 0);
+	if (p == MAP_FAILED) {
+		printf("mmap() failed: %m\n");
+		abort();
+	}
+
+	return p;
+}
+
+static void *mfd_assert_mmap_private(int fd)
+{
+	void *p;
+
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ | PROT_WRITE,
+		 MAP_PRIVATE,
+		 fd,
+		 0);
+	if (p == MAP_FAILED) {
+		printf("mmap() failed: %m\n");
+		abort();
+	}
+
+	return p;
+}
+
+static int global_mfd = -1;
+static void *global_p = NULL;
+
+static int sealing_thread_fn(void *arg)
+{
+	int sig, r;
+
+	/*
+	 * This thread first waits 200ms so any pending operation in the parent
+	 * is correctly started. After that, it tries to seal @global_mfd as
+	 * SEAL_WRITE. This _must_ fail as the parent thread has a read() into
+	 * that memory mapped object still ongoing.
+	 * We then wait one more second and try sealing again. This time it
+	 * must succeed as there shouldn't be anyone else pinning the pages.
+	 */
+
+	/* wait 200ms for FUSE-request to be active */
+	usleep(200000);
+
+	/* unmount mapping before sealing to avoid i_mmap_writable failures */
+	munmap(global_p, MFD_DEF_SIZE);
+
+	/* Try sealing the global file; expect EBUSY or success. Current
+	 * kernels will never succeed, but in the future, kernels might
+	 * implement page-replacements or other fancy ways to avoid racing
+	 * writes. */
+	r = mfd_busy_add_seals(global_mfd, F_SEAL_WRITE);
+	if (r >= 0) {
+		printf("HURRAY! This kernel fixed GUP races!\n");
+	} else {
+		/* wait 1s more so the FUSE-request is done */
+		sleep(1);
+
+		/* try sealing the global file again */
+		mfd_assert_add_seals(global_mfd, F_SEAL_WRITE);
+	}
+
+	return 0;
+}
+
+static pid_t spawn_sealing_thread(void)
+{
+	uint8_t *stack;
+	pid_t pid;
+
+	stack = malloc(STACK_SIZE);
+	if (!stack) {
+		printf("malloc(STACK_SIZE) failed: %m\n");
+		abort();
+	}
+
+	pid = clone(sealing_thread_fn,
+		    stack + STACK_SIZE,
+		    SIGCHLD | CLONE_FILES | CLONE_FS | CLONE_VM,
+		    NULL);
+	if (pid < 0) {
+		printf("clone() failed: %m\n");
+		abort();
+	}
+
+	return pid;
+}
+
+static void join_sealing_thread(pid_t pid)
+{
+	waitpid(pid, NULL, 0);
+}
+
+int main(int argc, char **argv)
+{
+	static const char zero[MFD_DEF_SIZE];
+	int fd, mfd, r;
+	void *p;
+	int was_sealed;
+	pid_t pid;
+
+	if (argc < 2) {
+		printf("error: please pass path to file in fuse_mnt mount-point\n");
+		abort();
+	}
+
+	/* open FUSE memfd file for GUP testing */
+	printf("opening: %s\n", argv[1]);
+	fd = open(argv[1], O_RDONLY | O_CLOEXEC);
+	if (fd < 0) {
+		printf("cannot open(\"%s\"): %m\n", argv[1]);
+		abort();
+	}
+
+	/* create new memfd-object */
+	mfd = mfd_assert_new("kern_memfd_fuse",
+			     MFD_DEF_SIZE,
+			     MFD_CLOEXEC | MFD_ALLOW_SEALING);
+
+	/* mmap memfd-object for writing */
+	p = mfd_assert_mmap_shared(mfd);
+
+	/* pass mfd+mapping to a separate sealing-thread which tries to seal
+	 * the memfd objects with SEAL_WRITE while we write into it */
+	global_mfd = mfd;
+	global_p = p;
+	pid = spawn_sealing_thread();
+
+	/* Use read() on the FUSE file to read into our memory-mapped memfd
+	 * object. This races the other thread which tries to seal the
+	 * memfd-object.
+	 * If @fd is on the memfd-fake-FUSE-FS, the read() is delayed by 1s.
+	 * This guarantees that the receive-buffer is pinned for 1s until the
+	 * data is written into it. The racing ADD_SEALS should thus fail as
+	 * the pages are still pinned. */
+	r = read(fd, p, MFD_DEF_SIZE);
+	if (r < 0) {
+		printf("read() failed: %m\n");
+		abort();
+	} else if (!r) {
+		printf("unexpected EOF on read()\n");
+		abort();
+	}
+
+	was_sealed = mfd_assert_get_seals(mfd) & F_SEAL_WRITE;
+
+	/* Wait for sealing-thread to finish and verify that it
+	 * successfully sealed the file after the second try. */
+	join_sealing_thread(pid);
+	mfd_assert_has_seals(mfd, F_SEAL_WRITE);
+
+	/* *IF* the memfd-object was sealed at the time our read() returned,
+	 * then the kernel did a page-replacement or canceled the read() (or
+	 * whatever magic it did..). In that case, the memfd object is still
+	 * all zero.
+	 * In case the memfd-object was *not* sealed, the read() was successfull
+	 * and the memfd object must *not* be all zero.
+	 * Note that in real scenarios, there might be a mixture of both, but
+	 * in this test-cases, we have explicit 200ms delays which should be
+	 * enough to avoid any in-flight writes. */
+
+	p = mfd_assert_mmap_private(mfd);
+	if (was_sealed && memcmp(p, zero, MFD_DEF_SIZE)) {
+		printf("memfd sealed during read() but data not discarded\n");
+		abort();
+	} else if (!was_sealed && !memcmp(p, zero, MFD_DEF_SIZE)) {
+		printf("memfd sealed after read() but data discarded\n");
+		abort();
+	}
+
+	close(mfd);
+	close(fd);
+
+	printf("fuse: DONE\n");
+
+	return 0;
+}
diff --git a/memfd/memfd_test.c b/memfd/memfd_test.c
new file mode 100644
index 0000000..3634c90
--- /dev/null
+++ b/memfd/memfd_test.c
@@ -0,0 +1,913 @@
+#define _GNU_SOURCE
+#define __EXPORTED_HEADERS__
+
+#include <errno.h>
+#include <inttypes.h>
+#include <limits.h>
+#include <linux/falloc.h>
+#include <linux/fcntl.h>
+#include <linux/memfd.h>
+#include <sched.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+
+#define MFD_DEF_SIZE 8192
+#define STACK_SIZE 65535
+
+static int sys_memfd_create(const char *name,
+			    unsigned int flags)
+{
+	return syscall(__NR_memfd_create, name, flags);
+}
+
+static int mfd_assert_new(const char *name, loff_t sz, unsigned int flags)
+{
+	int r, fd;
+
+	fd = sys_memfd_create(name, flags);
+	if (fd < 0) {
+		printf("memfd_create(\"%s\", %u) failed: %m\n",
+		       name, flags);
+		abort();
+	}
+
+	r = ftruncate(fd, sz);
+	if (r < 0) {
+		printf("ftruncate(%llu) failed: %m\n", (unsigned long long)sz);
+		abort();
+	}
+
+	return fd;
+}
+
+static void mfd_fail_new(const char *name, unsigned int flags)
+{
+	int r;
+
+	r = sys_memfd_create(name, flags);
+	if (r >= 0) {
+		printf("memfd_create(\"%s\", %u) succeeded, but failure expected\n",
+		       name, flags);
+		close(r);
+		abort();
+	}
+}
+
+static __u64 mfd_assert_get_seals(int fd)
+{
+	long r;
+
+	r = fcntl(fd, F_GET_SEALS);
+	if (r < 0) {
+		printf("GET_SEALS(%d) failed: %m\n", fd);
+		abort();
+	}
+
+	return r;
+}
+
+static void mfd_assert_has_seals(int fd, __u64 seals)
+{
+	__u64 s;
+
+	s = mfd_assert_get_seals(fd);
+	if (s != seals) {
+		printf("%llu != %llu = GET_SEALS(%d)\n",
+		       (unsigned long long)seals, (unsigned long long)s, fd);
+		abort();
+	}
+}
+
+static void mfd_assert_add_seals(int fd, __u64 seals)
+{
+	long r;
+	__u64 s;
+
+	s = mfd_assert_get_seals(fd);
+	r = fcntl(fd, F_ADD_SEALS, seals);
+	if (r < 0) {
+		printf("ADD_SEALS(%d, %llu -> %llu) failed: %m\n",
+		       fd, (unsigned long long)s, (unsigned long long)seals);
+		abort();
+	}
+}
+
+static void mfd_fail_add_seals(int fd, __u64 seals)
+{
+	long r;
+	__u64 s;
+
+	r = fcntl(fd, F_GET_SEALS);
+	if (r < 0)
+		s = 0;
+	else
+		s = r;
+
+	r = fcntl(fd, F_ADD_SEALS, seals);
+	if (r >= 0) {
+		printf("ADD_SEALS(%d, %llu -> %llu) didn't fail as expected\n",
+		       fd, (unsigned long long)s, (unsigned long long)seals);
+		abort();
+	}
+}
+
+static void mfd_assert_size(int fd, size_t size)
+{
+	struct stat st;
+	int r;
+
+	r = fstat(fd, &st);
+	if (r < 0) {
+		printf("fstat(%d) failed: %m\n", fd);
+		abort();
+	} else if (st.st_size != size) {
+		printf("wrong file size %lld, but expected %lld\n",
+		       (long long)st.st_size, (long long)size);
+		abort();
+	}
+}
+
+static int mfd_assert_dup(int fd)
+{
+	int r;
+
+	r = dup(fd);
+	if (r < 0) {
+		printf("dup(%d) failed: %m\n", fd);
+		abort();
+	}
+
+	return r;
+}
+
+static void *mfd_assert_mmap_shared(int fd)
+{
+	void *p;
+
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ | PROT_WRITE,
+		 MAP_SHARED,
+		 fd,
+		 0);
+	if (p == MAP_FAILED) {
+		printf("mmap() failed: %m\n");
+		abort();
+	}
+
+	return p;
+}
+
+static void *mfd_assert_mmap_private(int fd)
+{
+	void *p;
+
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ,
+		 MAP_PRIVATE,
+		 fd,
+		 0);
+	if (p == MAP_FAILED) {
+		printf("mmap() failed: %m\n");
+		abort();
+	}
+
+	return p;
+}
+
+static int mfd_assert_open(int fd, int flags, mode_t mode)
+{
+	char buf[512];
+	int r;
+
+	sprintf(buf, "/proc/self/fd/%d", fd);
+	r = open(buf, flags, mode);
+	if (r < 0) {
+		printf("open(%s) failed: %m\n", buf);
+		abort();
+	}
+
+	return r;
+}
+
+static void mfd_fail_open(int fd, int flags, mode_t mode)
+{
+	char buf[512];
+	int r;
+
+	sprintf(buf, "/proc/self/fd/%d", fd);
+	r = open(buf, flags, mode);
+	if (r >= 0) {
+		printf("open(%s) didn't fail as expected\n");
+		abort();
+	}
+}
+
+static void mfd_assert_read(int fd)
+{
+	char buf[16];
+	void *p;
+	ssize_t l;
+
+	l = read(fd, buf, sizeof(buf));
+	if (l != sizeof(buf)) {
+		printf("read() failed: %m\n");
+		abort();
+	}
+
+	/* verify PROT_READ *is* allowed */
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ,
+		 MAP_PRIVATE,
+		 fd,
+		 0);
+	if (p == MAP_FAILED) {
+		printf("mmap() failed: %m\n");
+		abort();
+	}
+	munmap(p, MFD_DEF_SIZE);
+
+	/* verify MAP_PRIVATE is *always* allowed (even writable) */
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ | PROT_WRITE,
+		 MAP_PRIVATE,
+		 fd,
+		 0);
+	if (p == MAP_FAILED) {
+		printf("mmap() failed: %m\n");
+		abort();
+	}
+	munmap(p, MFD_DEF_SIZE);
+}
+
+static void mfd_assert_write(int fd)
+{
+	ssize_t l;
+	void *p;
+	int r;
+
+	/* verify write() succeeds */
+	l = write(fd, "\0\0\0\0", 4);
+	if (l != 4) {
+		printf("write() failed: %m\n");
+		abort();
+	}
+
+	/* verify PROT_READ | PROT_WRITE is allowed */
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ | PROT_WRITE,
+		 MAP_SHARED,
+		 fd,
+		 0);
+	if (p == MAP_FAILED) {
+		printf("mmap() failed: %m\n");
+		abort();
+	}
+	*(char *)p = 0;
+	munmap(p, MFD_DEF_SIZE);
+
+	/* verify PROT_WRITE is allowed */
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_WRITE,
+		 MAP_SHARED,
+		 fd,
+		 0);
+	if (p == MAP_FAILED) {
+		printf("mmap() failed: %m\n");
+		abort();
+	}
+	*(char *)p = 0;
+	munmap(p, MFD_DEF_SIZE);
+
+	/* verify PROT_READ with MAP_SHARED is allowed and a following
+	 * mprotect(PROT_WRITE) allows writing */
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ,
+		 MAP_SHARED,
+		 fd,
+		 0);
+	if (p == MAP_FAILED) {
+		printf("mmap() failed: %m\n");
+		abort();
+	}
+
+	r = mprotect(p, MFD_DEF_SIZE, PROT_READ | PROT_WRITE);
+	if (r < 0) {
+		printf("mprotect() failed: %m\n");
+		abort();
+	}
+
+	*(char *)p = 0;
+	munmap(p, MFD_DEF_SIZE);
+
+	/* verify PUNCH_HOLE works */
+	r = fallocate(fd,
+		      FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
+		      0,
+		      MFD_DEF_SIZE);
+	if (r < 0) {
+		printf("fallocate(PUNCH_HOLE) failed: %m\n");
+		abort();
+	}
+}
+
+static void mfd_fail_write(int fd)
+{
+	ssize_t l;
+	void *p;
+	int r;
+
+	/* verify write() fails */
+	l = write(fd, "data", 4);
+	if (l != -EPERM) {
+		printf("expected EPERM on write(), but got %d: %m\n", (int)l);
+		abort();
+	}
+
+	/* verify PROT_READ | PROT_WRITE is not allowed */
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ | PROT_WRITE,
+		 MAP_SHARED,
+		 fd,
+		 0);
+	if (p != MAP_FAILED) {
+		printf("mmap() didn't fail as expected\n");
+		abort();
+	}
+
+	/* verify PROT_WRITE is not allowed */
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_WRITE,
+		 MAP_SHARED,
+		 fd,
+		 0);
+	if (p != MAP_FAILED) {
+		printf("mmap() didn't fail as expected\n");
+		abort();
+	}
+
+	/* Verify PROT_READ with MAP_SHARED with a following mprotect is not
+	 * allowed. Note that for r/w the kernel already prevents the mmap. */
+	p = mmap(NULL,
+		 MFD_DEF_SIZE,
+		 PROT_READ,
+		 MAP_SHARED,
+		 fd,
+		 0);
+	if (p != MAP_FAILED) {
+		r = mprotect(p, MFD_DEF_SIZE, PROT_READ | PROT_WRITE);
+		if (r >= 0) {
+			printf("mmap()+mprotect() didn't fail as expected\n");
+			abort();
+		}
+	}
+
+	/* verify PUNCH_HOLE fails */
+	r = fallocate(fd,
+		      FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
+		      0,
+		      MFD_DEF_SIZE);
+	if (r >= 0) {
+		printf("fallocate(PUNCH_HOLE) didn't fail as expected\n");
+		abort();
+	}
+}
+
+static void mfd_assert_shrink(int fd)
+{
+	int r, fd2;
+
+	r = ftruncate(fd, MFD_DEF_SIZE / 2);
+	if (r < 0) {
+		printf("ftruncate(SHRINK) failed: %m\n");
+		abort();
+	}
+
+	mfd_assert_size(fd, MFD_DEF_SIZE / 2);
+
+	fd2 = mfd_assert_open(fd,
+			      O_RDWR | O_CREAT | O_TRUNC,
+			      S_IRUSR | S_IWUSR);
+	close(fd2);
+
+	mfd_assert_size(fd, 0);
+}
+
+static void mfd_fail_shrink(int fd)
+{
+	int r;
+
+	r = ftruncate(fd, MFD_DEF_SIZE / 2);
+	if (r >= 0) {
+		printf("ftruncate(SHRINK) didn't fail as expected\n");
+		abort();
+	}
+
+	mfd_fail_open(fd,
+		      O_RDWR | O_CREAT | O_TRUNC,
+		      S_IRUSR | S_IWUSR);
+}
+
+static void mfd_assert_grow(int fd)
+{
+	int r;
+
+	r = ftruncate(fd, MFD_DEF_SIZE * 2);
+	if (r < 0) {
+		printf("ftruncate(GROW) failed: %m\n");
+		abort();
+	}
+
+	mfd_assert_size(fd, MFD_DEF_SIZE * 2);
+
+	r = fallocate(fd,
+		      0,
+		      0,
+		      MFD_DEF_SIZE * 4);
+	if (r < 0) {
+		printf("fallocate(ALLOC) failed: %m\n");
+		abort();
+	}
+
+	mfd_assert_size(fd, MFD_DEF_SIZE * 4);
+}
+
+static void mfd_fail_grow(int fd)
+{
+	int r;
+
+	r = ftruncate(fd, MFD_DEF_SIZE * 2);
+	if (r >= 0) {
+		printf("ftruncate(GROW) didn't fail as expected\n");
+		abort();
+	}
+
+	r = fallocate(fd,
+		      0,
+		      0,
+		      MFD_DEF_SIZE * 4);
+	if (r >= 0) {
+		printf("fallocate(ALLOC) didn't fail as expected\n");
+		abort();
+	}
+}
+
+static void mfd_assert_grow_write(int fd)
+{
+	static char buf[MFD_DEF_SIZE * 8];
+	ssize_t l;
+
+	l = pwrite(fd, buf, sizeof(buf), 0);
+	if (l != sizeof(buf)) {
+		printf("pwrite() failed: %m\n");
+		abort();
+	}
+
+	mfd_assert_size(fd, MFD_DEF_SIZE * 8);
+}
+
+static void mfd_fail_grow_write(int fd)
+{
+	static char buf[MFD_DEF_SIZE * 8];
+	ssize_t l;
+
+	l = pwrite(fd, buf, sizeof(buf), 0);
+	if (l == sizeof(buf)) {
+		printf("pwrite() didn't fail as expected\n");
+		abort();
+	}
+}
+
+static int idle_thread_fn(void *arg)
+{
+	sigset_t set;
+	int sig;
+
+	/* dummy waiter; SIGTERM terminates us anyway */
+	sigemptyset(&set);
+	sigaddset(&set, SIGTERM);
+	sigwait(&set, &sig);
+
+	return 0;
+}
+
+static pid_t spawn_idle_thread(unsigned int flags)
+{
+	uint8_t *stack;
+	pid_t pid;
+
+	stack = malloc(STACK_SIZE);
+	if (!stack) {
+		printf("malloc(STACK_SIZE) failed: %m\n");
+		abort();
+	}
+
+	pid = clone(idle_thread_fn,
+		    stack + STACK_SIZE,
+		    SIGCHLD | flags,
+		    NULL);
+	if (pid < 0) {
+		printf("clone() failed: %m\n");
+		abort();
+	}
+
+	return pid;
+}
+
+static void join_idle_thread(pid_t pid)
+{
+	kill(pid, SIGTERM);
+	waitpid(pid, NULL, 0);
+}
+
+/*
+ * Test memfd_create() syscall
+ * Verify syscall-argument validation, including name checks, flag validation
+ * and more.
+ */
+static void test_create(void)
+{
+	char buf[2048];
+	int fd;
+
+	/* test NULL name */
+	mfd_fail_new(NULL, 0);
+
+	/* test over-long name (not zero-terminated) */
+	memset(buf, 0xff, sizeof(buf));
+	mfd_fail_new(buf, 0);
+
+	/* test over-long zero-terminated name */
+	memset(buf, 0xff, sizeof(buf));
+	buf[sizeof(buf) - 1] = 0;
+	mfd_fail_new(buf, 0);
+
+	/* verify "" is a valid name */
+	fd = mfd_assert_new("", 0, 0);
+	close(fd);
+
+	/* verify invalid O_* open flags */
+	mfd_fail_new("", 0x0100);
+	mfd_fail_new("", ~MFD_CLOEXEC);
+	mfd_fail_new("", ~MFD_ALLOW_SEALING);
+	mfd_fail_new("", ~0);
+	mfd_fail_new("", 0x80000000U);
+
+	/* verify MFD_CLOEXEC is allowed */
+	fd = mfd_assert_new("", 0, MFD_CLOEXEC);
+	close(fd);
+
+	/* verify MFD_ALLOW_SEALING is allowed */
+	fd = mfd_assert_new("", 0, MFD_ALLOW_SEALING);
+	close(fd);
+
+	/* verify MFD_ALLOW_SEALING | MFD_CLOEXEC is allowed */
+	fd = mfd_assert_new("", 0, MFD_ALLOW_SEALING | MFD_CLOEXEC);
+	close(fd);
+}
+
+/*
+ * Test basic sealing
+ * A very basic sealing test to see whether setting/retrieving seals works.
+ */
+static void test_basic(void)
+{
+	int fd;
+
+	fd = mfd_assert_new("kern_memfd_basic",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC | MFD_ALLOW_SEALING);
+
+	/* add basic seals */
+	mfd_assert_has_seals(fd, 0);
+	mfd_assert_add_seals(fd, F_SEAL_SHRINK |
+				 F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, F_SEAL_SHRINK |
+				 F_SEAL_WRITE);
+
+	/* add them again */
+	mfd_assert_add_seals(fd, F_SEAL_SHRINK |
+				 F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, F_SEAL_SHRINK |
+				 F_SEAL_WRITE);
+
+	/* add more seals and seal against sealing */
+	mfd_assert_add_seals(fd, F_SEAL_GROW | F_SEAL_SEAL);
+	mfd_assert_has_seals(fd, F_SEAL_SHRINK |
+				 F_SEAL_GROW |
+				 F_SEAL_WRITE |
+				 F_SEAL_SEAL);
+
+	/* verify that sealing no longer works */
+	mfd_fail_add_seals(fd, F_SEAL_GROW);
+	mfd_fail_add_seals(fd, 0);
+
+	close(fd);
+
+	/* verify sealing does not work without MFD_ALLOW_SEALING */
+	fd = mfd_assert_new("kern_memfd_basic",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC);
+	mfd_assert_has_seals(fd, F_SEAL_SEAL);
+	mfd_fail_add_seals(fd, F_SEAL_SHRINK |
+			       F_SEAL_GROW |
+			       F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, F_SEAL_SEAL);
+	close(fd);
+}
+
+/*
+ * Test SEAL_WRITE
+ * Test whether SEAL_WRITE actually prevents modifications.
+ */
+static void test_seal_write(void)
+{
+	int fd;
+
+	fd = mfd_assert_new("kern_memfd_seal_write",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC | MFD_ALLOW_SEALING);
+	mfd_assert_has_seals(fd, 0);
+	mfd_assert_add_seals(fd, F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, F_SEAL_WRITE);
+
+	mfd_assert_read(fd);
+	mfd_fail_write(fd);
+	mfd_assert_shrink(fd);
+	mfd_assert_grow(fd);
+	mfd_fail_grow_write(fd);
+
+	close(fd);
+}
+
+/*
+ * Test SEAL_SHRINK
+ * Test whether SEAL_SHRINK actually prevents shrinking
+ */
+static void test_seal_shrink(void)
+{
+	int fd;
+
+	fd = mfd_assert_new("kern_memfd_seal_shrink",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC | MFD_ALLOW_SEALING);
+	mfd_assert_has_seals(fd, 0);
+	mfd_assert_add_seals(fd, F_SEAL_SHRINK);
+	mfd_assert_has_seals(fd, F_SEAL_SHRINK);
+
+	mfd_assert_read(fd);
+	mfd_assert_write(fd);
+	mfd_fail_shrink(fd);
+	mfd_assert_grow(fd);
+	mfd_assert_grow_write(fd);
+
+	close(fd);
+}
+
+/*
+ * Test SEAL_GROW
+ * Test whether SEAL_GROW actually prevents growing
+ */
+static void test_seal_grow(void)
+{
+	int fd;
+
+	fd = mfd_assert_new("kern_memfd_seal_grow",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC | MFD_ALLOW_SEALING);
+	mfd_assert_has_seals(fd, 0);
+	mfd_assert_add_seals(fd, F_SEAL_GROW);
+	mfd_assert_has_seals(fd, F_SEAL_GROW);
+
+	mfd_assert_read(fd);
+	mfd_assert_write(fd);
+	mfd_assert_shrink(fd);
+	mfd_fail_grow(fd);
+	mfd_fail_grow_write(fd);
+
+	close(fd);
+}
+
+/*
+ * Test SEAL_SHRINK | SEAL_GROW
+ * Test whether SEAL_SHRINK | SEAL_GROW actually prevents resizing
+ */
+static void test_seal_resize(void)
+{
+	int fd;
+
+	fd = mfd_assert_new("kern_memfd_seal_resize",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC | MFD_ALLOW_SEALING);
+	mfd_assert_has_seals(fd, 0);
+	mfd_assert_add_seals(fd, F_SEAL_SHRINK | F_SEAL_GROW);
+	mfd_assert_has_seals(fd, F_SEAL_SHRINK | F_SEAL_GROW);
+
+	mfd_assert_read(fd);
+	mfd_assert_write(fd);
+	mfd_fail_shrink(fd);
+	mfd_fail_grow(fd);
+	mfd_fail_grow_write(fd);
+
+	close(fd);
+}
+
+/*
+ * Test sharing via dup()
+ * Test that seals are shared between dupped FDs and they're all equal.
+ */
+static void test_share_dup(void)
+{
+	int fd, fd2;
+
+	fd = mfd_assert_new("kern_memfd_share_dup",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC | MFD_ALLOW_SEALING);
+	mfd_assert_has_seals(fd, 0);
+
+	fd2 = mfd_assert_dup(fd);
+	mfd_assert_has_seals(fd2, 0);
+
+	mfd_assert_add_seals(fd, F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, F_SEAL_WRITE);
+	mfd_assert_has_seals(fd2, F_SEAL_WRITE);
+
+	mfd_assert_add_seals(fd2, F_SEAL_SHRINK);
+	mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK);
+	mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK);
+
+	mfd_assert_add_seals(fd, F_SEAL_SEAL);
+	mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK | F_SEAL_SEAL);
+	mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK | F_SEAL_SEAL);
+
+	mfd_fail_add_seals(fd, F_SEAL_GROW);
+	mfd_fail_add_seals(fd2, F_SEAL_GROW);
+	mfd_fail_add_seals(fd, F_SEAL_SEAL);
+	mfd_fail_add_seals(fd2, F_SEAL_SEAL);
+
+	close(fd2);
+
+	mfd_fail_add_seals(fd, F_SEAL_GROW);
+	close(fd);
+}
+
+/*
+ * Test sealing with active mmap()s
+ * Modifying seals is only allowed if no other mmap() refs exist.
+ */
+static void test_share_mmap(void)
+{
+	int fd;
+	void *p;
+
+	fd = mfd_assert_new("kern_memfd_share_mmap",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC | MFD_ALLOW_SEALING);
+	mfd_assert_has_seals(fd, 0);
+
+	/* shared/writable ref prevents sealing WRITE, but allows others */
+	p = mfd_assert_mmap_shared(fd);
+	mfd_fail_add_seals(fd, F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, 0);
+	mfd_assert_add_seals(fd, F_SEAL_SHRINK);
+	mfd_assert_has_seals(fd, F_SEAL_SHRINK);
+	munmap(p, MFD_DEF_SIZE);
+
+	/* readable ref allows sealing */
+	p = mfd_assert_mmap_private(fd);
+	mfd_assert_add_seals(fd, F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK);
+	munmap(p, MFD_DEF_SIZE);
+
+	close(fd);
+}
+
+/*
+ * Test sealing with open(/proc/self/fd/%d)
+ * Via /proc we can get access to a separate file-context for the same memfd.
+ * This is *not* like dup(), but like a real separate open(). Make sure the
+ * semantics are as expected and we correctly check for RDONLY / WRONLY / RDWR.
+ */
+static void test_share_open(void)
+{
+	int fd, fd2;
+
+	fd = mfd_assert_new("kern_memfd_share_open",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC | MFD_ALLOW_SEALING);
+	mfd_assert_has_seals(fd, 0);
+
+	fd2 = mfd_assert_open(fd, O_RDWR, 0);
+	mfd_assert_add_seals(fd, F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, F_SEAL_WRITE);
+	mfd_assert_has_seals(fd2, F_SEAL_WRITE);
+
+	mfd_assert_add_seals(fd2, F_SEAL_SHRINK);
+	mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK);
+	mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK);
+
+	close(fd);
+	fd = mfd_assert_open(fd2, O_RDONLY, 0);
+
+	mfd_fail_add_seals(fd, F_SEAL_SEAL);
+	mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK);
+	mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK);
+
+	close(fd2);
+	fd2 = mfd_assert_open(fd, O_RDWR, 0);
+
+	mfd_assert_add_seals(fd2, F_SEAL_SEAL);
+	mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK | F_SEAL_SEAL);
+	mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK | F_SEAL_SEAL);
+
+	close(fd2);
+	close(fd);
+}
+
+/*
+ * Test sharing via fork()
+ * Test whether seal-modifications work as expected with forked childs.
+ */
+static void test_share_fork(void)
+{
+	int fd;
+	pid_t pid;
+
+	fd = mfd_assert_new("kern_memfd_share_fork",
+			    MFD_DEF_SIZE,
+			    MFD_CLOEXEC | MFD_ALLOW_SEALING);
+	mfd_assert_has_seals(fd, 0);
+
+	pid = spawn_idle_thread(0);
+	mfd_assert_add_seals(fd, F_SEAL_SEAL);
+	mfd_assert_has_seals(fd, F_SEAL_SEAL);
+
+	mfd_fail_add_seals(fd, F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, F_SEAL_SEAL);
+
+	join_idle_thread(pid);
+
+	mfd_fail_add_seals(fd, F_SEAL_WRITE);
+	mfd_assert_has_seals(fd, F_SEAL_SEAL);
+
+	close(fd);
+}
+
+int main(int argc, char **argv)
+{
+	pid_t pid;
+
+	printf("memfd: CREATE\n");
+	test_create();
+	printf("memfd: BASIC\n");
+	test_basic();
+
+	printf("memfd: SEAL-WRITE\n");
+	test_seal_write();
+	printf("memfd: SEAL-SHRINK\n");
+	test_seal_shrink();
+	printf("memfd: SEAL-GROW\n");
+	test_seal_grow();
+	printf("memfd: SEAL-RESIZE\n");
+	test_seal_resize();
+
+	printf("memfd: SHARE-DUP\n");
+	test_share_dup();
+	printf("memfd: SHARE-MMAP\n");
+	test_share_mmap();
+	printf("memfd: SHARE-OPEN\n");
+	test_share_open();
+	printf("memfd: SHARE-FORK\n");
+	test_share_fork();
+
+	/* Run test-suite in a multi-threaded environment with a shared
+	 * file-table. */
+	pid = spawn_idle_thread(CLONE_FILES | CLONE_FS | CLONE_VM);
+	printf("memfd: SHARE-DUP (shared file-table)\n");
+	test_share_dup();
+	printf("memfd: SHARE-MMAP (shared file-table)\n");
+	test_share_mmap();
+	printf("memfd: SHARE-OPEN (shared file-table)\n");
+	test_share_open();
+	printf("memfd: SHARE-FORK (shared file-table)\n");
+	test_share_fork();
+	join_idle_thread(pid);
+
+	printf("memfd: DONE\n");
+
+	return 0;
+}
diff --git a/memfd/run_fuse_test.sh b/memfd/run_fuse_test.sh
new file mode 100644
index 0000000..69b930e
--- /dev/null
+++ b/memfd/run_fuse_test.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+if test -d "./mnt" ; then
+	fusermount -u ./mnt
+	rmdir ./mnt
+fi
+
+set -e
+
+mkdir mnt
+./fuse_mnt ./mnt
+./fuse_test ./mnt/memfd
+fusermount -u ./mnt
+rmdir ./mnt
diff --git a/memory-hotplug/Makefile b/memory-hotplug/Makefile
index 058c76f..d46b8d4 100644
--- a/memory-hotplug/Makefile
+++ b/memory-hotplug/Makefile
@@ -1,6 +1,9 @@
 all:
 
 run_tests:
+	@/bin/bash ./on-off-test.sh -r 2 || echo "memory-hotplug selftests: [FAIL]"
+
+run_full_test:
 	@/bin/bash ./on-off-test.sh || echo "memory-hotplug selftests: [FAIL]"
 
 clean:
diff --git a/memory-hotplug/on-off-test.sh b/memory-hotplug/on-off-test.sh
index a2816f6..6cddde0 100644
--- a/memory-hotplug/on-off-test.sh
+++ b/memory-hotplug/on-off-test.sh
@@ -142,10 +142,16 @@ fi
 
 prerequisite
 
+echo "Test scope: $ratio% hotplug memory"
+echo -e "\t online all hotplug memory in offline state"
+echo -e "\t offline $ratio% hotplug memory in online state"
+echo -e "\t online all hotplug memory in offline state"
+
 #
 # Online all hot-pluggable memory
 #
 for memory in `hotplaggable_offline_memory`; do
+	echo offline-online $memory
 	online_memory_expect_success $memory
 done
 
@@ -154,6 +160,7 @@ done
 #
 for memory in `hotpluggable_online_memory`; do
 	if [ $((RANDOM % 100)) -lt $ratio ]; then
+		echo online-offline $memory
 		offline_memory_expect_success $memory
 	fi
 done
@@ -162,6 +169,7 @@ done
 # Online all hot-pluggable memory again
 #
 for memory in `hotplaggable_offline_memory`; do
+	echo offline-online $memory
 	online_memory_expect_success $memory
 done
 
diff --git a/mount/Makefile b/mount/Makefile
new file mode 100644
index 0000000..337d853
--- /dev/null
+++ b/mount/Makefile
@@ -0,0 +1,17 @@
+# Makefile for mount selftests.
+
+all: unprivileged-remount-test
+
+unprivileged-remount-test: unprivileged-remount-test.c
+	gcc -Wall -O2 unprivileged-remount-test.c -o unprivileged-remount-test
+
+# Allow specific tests to be selected.
+test_unprivileged_remount: unprivileged-remount-test
+	@if [ -f /proc/self/uid_map ] ; then ./unprivileged-remount-test ; fi
+
+run_tests: all test_unprivileged_remount
+
+clean:
+	rm -f unprivileged-remount-test
+
+.PHONY: all test_unprivileged_remount
diff --git a/mount/unprivileged-remount-test.c b/mount/unprivileged-remount-test.c
new file mode 100644
index 0000000..1b3ff2f
--- /dev/null
+++ b/mount/unprivileged-remount-test.c
@@ -0,0 +1,242 @@
+#define _GNU_SOURCE
+#include <sched.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/mount.h>
+#include <sys/wait.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <grp.h>
+#include <stdbool.h>
+#include <stdarg.h>
+
+#ifndef CLONE_NEWNS
+# define CLONE_NEWNS 0x00020000
+#endif
+#ifndef CLONE_NEWUTS
+# define CLONE_NEWUTS 0x04000000
+#endif
+#ifndef CLONE_NEWIPC
+# define CLONE_NEWIPC 0x08000000
+#endif
+#ifndef CLONE_NEWNET
+# define CLONE_NEWNET 0x40000000
+#endif
+#ifndef CLONE_NEWUSER
+# define CLONE_NEWUSER 0x10000000
+#endif
+#ifndef CLONE_NEWPID
+# define CLONE_NEWPID 0x20000000
+#endif
+
+#ifndef MS_RELATIME
+#define MS_RELATIME (1 << 21)
+#endif
+#ifndef MS_STRICTATIME
+#define MS_STRICTATIME (1 << 24)
+#endif
+
+static void die(char *fmt, ...)
+{
+	va_list ap;
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	exit(EXIT_FAILURE);
+}
+
+static void write_file(char *filename, char *fmt, ...)
+{
+	char buf[4096];
+	int fd;
+	ssize_t written;
+	int buf_len;
+	va_list ap;
+
+	va_start(ap, fmt);
+	buf_len = vsnprintf(buf, sizeof(buf), fmt, ap);
+	va_end(ap);
+	if (buf_len < 0) {
+		die("vsnprintf failed: %s\n",
+		    strerror(errno));
+	}
+	if (buf_len >= sizeof(buf)) {
+		die("vsnprintf output truncated\n");
+	}
+
+	fd = open(filename, O_WRONLY);
+	if (fd < 0) {
+		die("open of %s failed: %s\n",
+		    filename, strerror(errno));
+	}
+	written = write(fd, buf, buf_len);
+	if (written != buf_len) {
+		if (written >= 0) {
+			die("short write to %s\n", filename);
+		} else {
+			die("write to %s failed: %s\n",
+				filename, strerror(errno));
+		}
+	}
+	if (close(fd) != 0) {
+		die("close of %s failed: %s\n",
+			filename, strerror(errno));
+	}
+}
+
+static void create_and_enter_userns(void)
+{
+	uid_t uid;
+	gid_t gid;
+
+	uid = getuid();
+	gid = getgid();
+
+	if (unshare(CLONE_NEWUSER) !=0) {
+		die("unshare(CLONE_NEWUSER) failed: %s\n",
+			strerror(errno));
+	}
+
+	write_file("/proc/self/uid_map", "0 %d 1", uid);
+	write_file("/proc/self/gid_map", "0 %d 1", gid);
+
+	if (setgroups(0, NULL) != 0) {
+		die("setgroups failed: %s\n",
+			strerror(errno));
+	}
+	if (setgid(0) != 0) {
+		die ("setgid(0) failed %s\n",
+			strerror(errno));
+	}
+	if (setuid(0) != 0) {
+		die("setuid(0) failed %s\n",
+			strerror(errno));
+	}
+}
+
+static
+bool test_unpriv_remount(int mount_flags, int remount_flags, int invalid_flags)
+{
+	pid_t child;
+
+	child = fork();
+	if (child == -1) {
+		die("fork failed: %s\n",
+			strerror(errno));
+	}
+	if (child != 0) { /* parent */
+		pid_t pid;
+		int status;
+		pid = waitpid(child, &status, 0);
+		if (pid == -1) {
+			die("waitpid failed: %s\n",
+				strerror(errno));
+		}
+		if (pid != child) {
+			die("waited for %d got %d\n",
+				child, pid);
+		}
+		if (!WIFEXITED(status)) {
+			die("child did not terminate cleanly\n");
+		}
+		return WEXITSTATUS(status) == EXIT_SUCCESS ? true : false;
+	}
+
+	create_and_enter_userns();
+	if (unshare(CLONE_NEWNS) != 0) {
+		die("unshare(CLONE_NEWNS) failed: %s\n",
+			strerror(errno));
+	}
+
+	if (mount("testing", "/tmp", "ramfs", mount_flags, NULL) != 0) {
+		die("mount of /tmp failed: %s\n",
+			strerror(errno));
+	}
+
+	create_and_enter_userns();
+
+	if (unshare(CLONE_NEWNS) != 0) {
+		die("unshare(CLONE_NEWNS) failed: %s\n",
+			strerror(errno));
+	}
+
+	if (mount("/tmp", "/tmp", "none",
+		  MS_REMOUNT | MS_BIND | remount_flags, NULL) != 0) {
+		/* system("cat /proc/self/mounts"); */
+		die("remount of /tmp failed: %s\n",
+		    strerror(errno));
+	}
+
+	if (mount("/tmp", "/tmp", "none",
+		  MS_REMOUNT | MS_BIND | invalid_flags, NULL) == 0) {
+		/* system("cat /proc/self/mounts"); */
+		die("remount of /tmp with invalid flags "
+		    "succeeded unexpectedly\n");
+	}
+	exit(EXIT_SUCCESS);
+}
+
+static bool test_unpriv_remount_simple(int mount_flags)
+{
+	return test_unpriv_remount(mount_flags, mount_flags, 0);
+}
+
+static bool test_unpriv_remount_atime(int mount_flags, int invalid_flags)
+{
+	return test_unpriv_remount(mount_flags, mount_flags, invalid_flags);
+}
+
+int main(int argc, char **argv)
+{
+	if (!test_unpriv_remount_simple(MS_RDONLY|MS_NODEV)) {
+		die("MS_RDONLY malfunctions\n");
+	}
+	if (!test_unpriv_remount_simple(MS_NODEV)) {
+		die("MS_NODEV malfunctions\n");
+	}
+	if (!test_unpriv_remount_simple(MS_NOSUID|MS_NODEV)) {
+		die("MS_NOSUID malfunctions\n");
+	}
+	if (!test_unpriv_remount_simple(MS_NOEXEC|MS_NODEV)) {
+		die("MS_NOEXEC malfunctions\n");
+	}
+	if (!test_unpriv_remount_atime(MS_RELATIME|MS_NODEV,
+				       MS_NOATIME|MS_NODEV))
+	{
+		die("MS_RELATIME malfunctions\n");
+	}
+	if (!test_unpriv_remount_atime(MS_STRICTATIME|MS_NODEV,
+				       MS_NOATIME|MS_NODEV))
+	{
+		die("MS_STRICTATIME malfunctions\n");
+	}
+	if (!test_unpriv_remount_atime(MS_NOATIME|MS_NODEV,
+				       MS_STRICTATIME|MS_NODEV))
+	{
+		die("MS_RELATIME malfunctions\n");
+	}
+	if (!test_unpriv_remount_atime(MS_RELATIME|MS_NODIRATIME|MS_NODEV,
+				       MS_NOATIME|MS_NODEV))
+	{
+		die("MS_RELATIME malfunctions\n");
+	}
+	if (!test_unpriv_remount_atime(MS_STRICTATIME|MS_NODIRATIME|MS_NODEV,
+				       MS_NOATIME|MS_NODEV))
+	{
+		die("MS_RELATIME malfunctions\n");
+	}
+	if (!test_unpriv_remount_atime(MS_NOATIME|MS_NODIRATIME|MS_NODEV,
+				       MS_STRICTATIME|MS_NODEV))
+	{
+		die("MS_RELATIME malfunctions\n");
+	}
+	if (!test_unpriv_remount(MS_STRICTATIME|MS_NODEV, MS_NODEV,
+				 MS_NOATIME|MS_NODEV))
+	{
+		die("Default atime malfunctions\n");
+	}
+	return EXIT_SUCCESS;
+}
diff --git a/mqueue/Makefile b/mqueue/Makefile
index 218a122..8056e2e 100644
--- a/mqueue/Makefile
+++ b/mqueue/Makefile
@@ -1,6 +1,6 @@
 all:
-	gcc -O2 -lrt mq_open_tests.c -o mq_open_tests
-	gcc -O2 -lrt -lpthread -lpopt -o mq_perf_tests mq_perf_tests.c
+	gcc -O2 mq_open_tests.c -o mq_open_tests -lrt
+	gcc -O2 -o mq_perf_tests mq_perf_tests.c -lrt -lpthread -lpopt
 
 run_tests:
 	@./mq_open_tests /test1 || echo "mq_open_tests: [FAIL]"
diff --git a/mqueue/mq_open_tests.c b/mqueue/mq_open_tests.c
index 711cc29..9c1a5d3 100644
--- a/mqueue/mq_open_tests.c
+++ b/mqueue/mq_open_tests.c
@@ -80,7 +80,8 @@ void shutdown(int exit_val, char *err_cause, int line_no)
 	if (in_shutdown++)
 		return;
 
-	seteuid(0);
+	if (seteuid(0) == -1)
+		perror("seteuid() failed");
 
 	if (queue != -1)
 		if (mq_close(queue))
@@ -292,8 +293,10 @@ int main(int argc, char *argv[])
 	/* Tell the user our initial state */
 	printf("\nInitial system state:\n");
 	printf("\tUsing queue path:\t\t%s\n", queue_path);
-	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", saved_limits.rlim_cur);
-	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", saved_limits.rlim_max);
+	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n",
+		(long) saved_limits.rlim_cur);
+	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n",
+		(long) saved_limits.rlim_max);
 	printf("\tMaximum Message Size:\t\t%d\n", saved_max_msgsize);
 	printf("\tMaximum Queue Size:\t\t%d\n", saved_max_msgs);
 	if (default_settings) {
@@ -308,8 +311,8 @@ int main(int argc, char *argv[])
 	validate_current_settings();
 
 	printf("Adjusted system state for testing:\n");
-	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", cur_limits.rlim_cur);
-	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", cur_limits.rlim_max);
+	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n", (long) cur_limits.rlim_cur);
+	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n", (long) cur_limits.rlim_max);
 	printf("\tMaximum Message Size:\t\t%d\n", cur_max_msgsize);
 	printf("\tMaximum Queue Size:\t\t%d\n", cur_max_msgs);
 	if (default_settings) {
@@ -454,7 +457,12 @@ int main(int argc, char *argv[])
 	else
 		printf("Queue open with total size > 2GB when euid = 0 "
 		       "failed:\t\t\tPASS\n");
-	seteuid(99);
+
+	if (seteuid(99) == -1) {
+		perror("seteuid() failed");
+		exit(1);
+	}
+
 	attr.mq_maxmsg = cur_max_msgs;
 	attr.mq_msgsize = cur_max_msgsize;
 	if (test_queue_fail(&attr, &result))
diff --git a/mqueue/mq_perf_tests.c b/mqueue/mq_perf_tests.c
index 2fadd4b..94dae65 100644
--- a/mqueue/mq_perf_tests.c
+++ b/mqueue/mq_perf_tests.c
@@ -296,9 +296,9 @@ static inline void open_queue(struct mq_attr *attr)
 	printf("\n\tQueue %s created:\n", queue_path);
 	printf("\t\tmq_flags:\t\t\t%s\n", result.mq_flags & O_NONBLOCK ?
 	       "O_NONBLOCK" : "(null)");
-	printf("\t\tmq_maxmsg:\t\t\t%d\n", result.mq_maxmsg);
-	printf("\t\tmq_msgsize:\t\t\t%d\n", result.mq_msgsize);
-	printf("\t\tmq_curmsgs:\t\t\t%d\n", result.mq_curmsgs);
+	printf("\t\tmq_maxmsg:\t\t\t%lu\n", result.mq_maxmsg);
+	printf("\t\tmq_msgsize:\t\t\t%lu\n", result.mq_msgsize);
+	printf("\t\tmq_curmsgs:\t\t\t%lu\n", result.mq_curmsgs);
 }
 
 void *fake_cont_thread(void *arg)
@@ -440,7 +440,7 @@ void *perf_test_thread(void *arg)
 		shutdown(2, "clock_getres()", __LINE__);
 
 	printf("\t\tMax priorities:\t\t\t%d\n", mq_prio_max);
-	printf("\t\tClock resolution:\t\t%d nsec%s\n", res.tv_nsec,
+	printf("\t\tClock resolution:\t\t%lu nsec%s\n", res.tv_nsec,
 	       res.tv_nsec > 1 ? "s" : "");
 
 
@@ -454,20 +454,20 @@ void *perf_test_thread(void *arg)
 	recv_total.tv_nsec = 0;
 	for (i = 0; i < TEST1_LOOPS; i++)
 		do_send_recv();
-	printf("\t\tSend msg:\t\t\t%d.%ds total time\n",
+	printf("\t\tSend msg:\t\t\t%ld.%lus total time\n",
 	       send_total.tv_sec, send_total.tv_nsec);
 	nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
 		 send_total.tv_nsec) / TEST1_LOOPS;
-	printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
-	printf("\t\tRecv msg:\t\t\t%d.%ds total time\n",
+	printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+	printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n",
 	       recv_total.tv_sec, recv_total.tv_nsec);
 	nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
 		recv_total.tv_nsec) / TEST1_LOOPS;
-	printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+	printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
 
 
 	for (cur_test = test2; cur_test->desc != NULL; cur_test++) {
-		printf(cur_test->desc);
+		printf("%s:\n", cur_test->desc);
 		printf("\t\t(%d iterations)\n", TEST2_LOOPS);
 		prio_out = 0;
 		send_total.tv_sec = 0;
@@ -493,16 +493,16 @@ void *perf_test_thread(void *arg)
 			cur_test->func(&prio_out);
 		}
 		printf("done.\n");
-		printf("\t\tSend msg:\t\t\t%d.%ds total time\n",
+		printf("\t\tSend msg:\t\t\t%ld.%lus total time\n",
 		       send_total.tv_sec, send_total.tv_nsec);
 		nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
 			 send_total.tv_nsec) / TEST2_LOOPS;
-		printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
-		printf("\t\tRecv msg:\t\t\t%d.%ds total time\n",
+		printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+		printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n",
 		       recv_total.tv_sec, recv_total.tv_nsec);
 		nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
 			recv_total.tv_nsec) / TEST2_LOOPS;
-		printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+		printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
 		printf("\t\tDraining queue...");
 		fflush(stdout);
 		clock_gettime(clock, &start);
@@ -653,8 +653,10 @@ int main(int argc, char *argv[])
 	/* Tell the user our initial state */
 	printf("\nInitial system state:\n");
 	printf("\tUsing queue path:\t\t\t%s\n", queue_path);
-	printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n", saved_limits.rlim_cur);
-	printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n", saved_limits.rlim_max);
+	printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n",
+		(long) saved_limits.rlim_cur);
+	printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n",
+		(long) saved_limits.rlim_max);
 	printf("\tMaximum Message Size:\t\t\t%d\n", saved_max_msgsize);
 	printf("\tMaximum Queue Size:\t\t\t%d\n", saved_max_msgs);
 	printf("\tNice value:\t\t\t\t%d\n", cur_nice);
@@ -667,10 +669,10 @@ int main(int argc, char *argv[])
 		printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t(unlimited)\n");
 		printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t(unlimited)\n");
 	} else {
-		printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n",
-		       cur_limits.rlim_cur);
-		printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n",
-		       cur_limits.rlim_max);
+		printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n",
+		       (long) cur_limits.rlim_cur);
+		printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n",
+		       (long) cur_limits.rlim_max);
 	}
 	printf("\tMaximum Message Size:\t\t\t%d\n", cur_max_msgsize);
 	printf("\tMaximum Queue Size:\t\t\t%d\n", cur_max_msgs);
diff --git a/powerpc/Makefile b/powerpc/Makefile
index 54833a7..74a78ce 100644
--- a/powerpc/Makefile
+++ b/powerpc/Makefile
@@ -17,10 +17,10 @@ TARGETS = pmu copyloops mm tm
 
 endif
 
-all:
-	@for TARGET in $(TARGETS); do \
-		$(MAKE) -C $$TARGET all; \
-	done;
+all: $(TARGETS)
+
+$(TARGETS):
+	$(MAKE) -k -C $@ all
 
 run_tests: all
 	@for TARGET in $(TARGETS); do \
@@ -36,4 +36,4 @@ clean:
 tags:
 	find . -name '*.c' -o -name '*.h' | xargs ctags
 
-.PHONY: all run_tests clean tags
+.PHONY: all run_tests clean tags $(TARGETS)
diff --git a/powerpc/pmu/Makefile b/powerpc/pmu/Makefile
index b9ff0db..c9f4263 100644
--- a/powerpc/pmu/Makefile
+++ b/powerpc/pmu/Makefile
@@ -1,10 +1,12 @@
 noarg:
 	$(MAKE) -C ../
 
-PROGS := count_instructions
-EXTRA_SOURCES := ../harness.c event.c
+PROGS := count_instructions l3_bank_test per_event_excludes
+EXTRA_SOURCES := ../harness.c event.c lib.c
 
-all: $(PROGS) sub_all
+SUB_TARGETS = ebb
+
+all: $(PROGS) $(SUB_TARGETS)
 
 $(PROGS): $(EXTRA_SOURCES)
 
@@ -20,13 +22,8 @@ run_tests: all sub_run_tests
 clean: sub_clean
 	rm -f $(PROGS) loop.o
 
-
-SUB_TARGETS = ebb
-
-sub_all:
-	@for TARGET in $(SUB_TARGETS); do \
-		$(MAKE) -C $$TARGET all; \
-	done;
+$(SUB_TARGETS):
+	$(MAKE) -k -C $@ all
 
 sub_run_tests: all
 	@for TARGET in $(SUB_TARGETS); do \
@@ -38,4 +35,4 @@ sub_clean:
 		$(MAKE) -C $$TARGET clean; \
 	done;
 
-.PHONY: all run_tests clean sub_all sub_run_tests sub_clean
+.PHONY: all run_tests clean sub_run_tests sub_clean $(SUB_TARGETS)
diff --git a/powerpc/pmu/count_instructions.c b/powerpc/pmu/count_instructions.c
index 312b4f0..4622117 100644
--- a/powerpc/pmu/count_instructions.c
+++ b/powerpc/pmu/count_instructions.c
@@ -12,6 +12,7 @@
 
 #include "event.h"
 #include "utils.h"
+#include "lib.h"
 
 extern void thirty_two_instruction_loop(u64 loops);
 
@@ -90,7 +91,7 @@ static u64 determine_overhead(struct event *events)
 	return overhead;
 }
 
-static int count_instructions(void)
+static int test_body(void)
 {
 	struct event events[2];
 	u64 overhead;
@@ -111,17 +112,23 @@ static int count_instructions(void)
 	overhead = determine_overhead(events);
 	printf("Overhead of null loop: %llu instructions\n", overhead);
 
-	/* Run for 1M instructions */
-	FAIL_IF(do_count_loop(events, 0x100000, overhead, true));
+	/* Run for 1Mi instructions */
+	FAIL_IF(do_count_loop(events, 1000000, overhead, true));
+
+	/* Run for 10Mi instructions */
+	FAIL_IF(do_count_loop(events, 10000000, overhead, true));
+
+	/* Run for 100Mi instructions */
+	FAIL_IF(do_count_loop(events, 100000000, overhead, true));
 
-	/* Run for 10M instructions */
-	FAIL_IF(do_count_loop(events, 0xa00000, overhead, true));
+	/* Run for 1Bi instructions */
+	FAIL_IF(do_count_loop(events, 1000000000, overhead, true));
 
-	/* Run for 100M instructions */
-	FAIL_IF(do_count_loop(events, 0x6400000, overhead, true));
+	/* Run for 16Bi instructions */
+	FAIL_IF(do_count_loop(events, 16000000000, overhead, true));
 
-	/* Run for 1G instructions */
-	FAIL_IF(do_count_loop(events, 0x40000000, overhead, true));
+	/* Run for 64Bi instructions */
+	FAIL_IF(do_count_loop(events, 64000000000, overhead, true));
 
 	event_close(&events[0]);
 	event_close(&events[1]);
@@ -129,6 +136,11 @@ static int count_instructions(void)
 	return 0;
 }
 
+static int count_instructions(void)
+{
+	return eat_cpu(test_body);
+}
+
 int main(void)
 {
 	return test_harness(count_instructions, "count_instructions");
diff --git a/powerpc/pmu/ebb/Makefile b/powerpc/pmu/ebb/Makefile
index edbba2a..3dc4332 100644
--- a/powerpc/pmu/ebb/Makefile
+++ b/powerpc/pmu/ebb/Makefile
@@ -13,11 +13,12 @@ PROGS := reg_access_test event_attributes_test cycles_test	\
 	 close_clears_pmcc_test instruction_count_test		\
 	 fork_cleanup_test ebb_on_child_test			\
 	 ebb_on_willing_child_test back_to_back_ebbs_test	\
-	 lost_exception_test no_handler_test
+	 lost_exception_test no_handler_test			\
+	 cycles_with_mmcr2_test
 
 all: $(PROGS)
 
-$(PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c
+$(PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c busy_loop.S
 
 instruction_count_test: ../loop.S
 
diff --git a/powerpc/pmu/ebb/busy_loop.S b/powerpc/pmu/ebb/busy_loop.S
new file mode 100644
index 0000000..c7e4093
--- /dev/null
+++ b/powerpc/pmu/ebb/busy_loop.S
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <ppc-asm.h>
+
+	.text
+
+FUNC_START(core_busy_loop)
+	stdu	%r1, -168(%r1)
+	std	r14, 160(%r1)
+	std	r15, 152(%r1)
+	std	r16, 144(%r1)
+	std	r17, 136(%r1)
+	std	r18, 128(%r1)
+	std	r19, 120(%r1)
+	std	r20, 112(%r1)
+	std	r21, 104(%r1)
+	std	r22, 96(%r1)
+	std	r23, 88(%r1)
+	std	r24, 80(%r1)
+	std	r25, 72(%r1)
+	std	r26, 64(%r1)
+	std	r27, 56(%r1)
+	std	r28, 48(%r1)
+	std	r29, 40(%r1)
+	std	r30, 32(%r1)
+	std	r31, 24(%r1)
+
+	li	 r3, 0x3030
+	std	 r3, -96(%r1)
+	li	 r4, 0x4040
+	std	 r4, -104(%r1)
+	li	 r5, 0x5050
+	std	 r5, -112(%r1)
+	li	 r6, 0x6060
+	std	 r6, -120(%r1)
+	li	 r7, 0x7070
+	std	 r7, -128(%r1)
+	li	 r8, 0x0808
+	std	 r8, -136(%r1)
+	li	 r9, 0x0909
+	std	 r9, -144(%r1)
+	li	r10, 0x1010
+	std	r10, -152(%r1)
+	li	r11, 0x1111
+	std	r11, -160(%r1)
+	li	r14, 0x1414
+	std	r14, -168(%r1)
+	li	r15, 0x1515
+	std	r15, -176(%r1)
+	li	r16, 0x1616
+	std	r16, -184(%r1)
+	li	r17, 0x1717
+	std	r17, -192(%r1)
+	li	r18, 0x1818
+	std	r18, -200(%r1)
+	li	r19, 0x1919
+	std	r19, -208(%r1)
+	li	r20, 0x2020
+	std	r20, -216(%r1)
+	li	r21, 0x2121
+	std	r21, -224(%r1)
+	li	r22, 0x2222
+	std	r22, -232(%r1)
+	li	r23, 0x2323
+	std	r23, -240(%r1)
+	li	r24, 0x2424
+	std	r24, -248(%r1)
+	li	r25, 0x2525
+	std	r25, -256(%r1)
+	li	r26, 0x2626
+	std	r26, -264(%r1)
+	li	r27, 0x2727
+	std	r27, -272(%r1)
+	li	r28, 0x2828
+	std	r28, -280(%r1)
+	li	r29, 0x2929
+	std	r29, -288(%r1)
+	li	r30, 0x3030
+	li	r31, 0x3131
+
+	li	r3, 0
+0:	addi	r3, r3, 1
+	cmpwi	r3, 100
+	blt	0b
+
+	/* Return 1 (fail) unless we get through all the checks */
+	li	r3, 1
+
+	/* Check none of our registers have been corrupted */
+	cmpwi	r4,  0x4040
+	bne	1f
+	cmpwi	r5,  0x5050
+	bne	1f
+	cmpwi	r6,  0x6060
+	bne	1f
+	cmpwi	r7,  0x7070
+	bne	1f
+	cmpwi	r8,  0x0808
+	bne	1f
+	cmpwi	r9,  0x0909
+	bne	1f
+	cmpwi	r10, 0x1010
+	bne	1f
+	cmpwi	r11, 0x1111
+	bne	1f
+	cmpwi	r14, 0x1414
+	bne	1f
+	cmpwi	r15, 0x1515
+	bne	1f
+	cmpwi	r16, 0x1616
+	bne	1f
+	cmpwi	r17, 0x1717
+	bne	1f
+	cmpwi	r18, 0x1818
+	bne	1f
+	cmpwi	r19, 0x1919
+	bne	1f
+	cmpwi	r20, 0x2020
+	bne	1f
+	cmpwi	r21, 0x2121
+	bne	1f
+	cmpwi	r22, 0x2222
+	bne	1f
+	cmpwi	r23, 0x2323
+	bne	1f
+	cmpwi	r24, 0x2424
+	bne	1f
+	cmpwi	r25, 0x2525
+	bne	1f
+	cmpwi	r26, 0x2626
+	bne	1f
+	cmpwi	r27, 0x2727
+	bne	1f
+	cmpwi	r28, 0x2828
+	bne	1f
+	cmpwi	r29, 0x2929
+	bne	1f
+	cmpwi	r30, 0x3030
+	bne	1f
+	cmpwi	r31, 0x3131
+	bne	1f
+
+	/* Load junk into all our registers before we reload them from the stack. */
+	li	r3,  0xde
+	li	r4,  0xad
+	li	r5,  0xbe
+	li	r6,  0xef
+	li	r7,  0xde
+	li	r8,  0xad
+	li	r9,  0xbe
+	li	r10, 0xef
+	li	r11, 0xde
+	li	r14, 0xad
+	li	r15, 0xbe
+	li	r16, 0xef
+	li	r17, 0xde
+	li	r18, 0xad
+	li	r19, 0xbe
+	li	r20, 0xef
+	li	r21, 0xde
+	li	r22, 0xad
+	li	r23, 0xbe
+	li	r24, 0xef
+	li	r25, 0xde
+	li	r26, 0xad
+	li	r27, 0xbe
+	li	r28, 0xef
+	li	r29, 0xdd
+
+	ld	r3,	-96(%r1)
+	cmpwi	r3,  0x3030
+	bne	1f
+	ld	r4,	-104(%r1)
+	cmpwi	r4,  0x4040
+	bne	1f
+	ld	r5,	-112(%r1)
+	cmpwi	r5,  0x5050
+	bne	1f
+	ld	r6,	-120(%r1)
+	cmpwi	r6,  0x6060
+	bne	1f
+	ld	r7,	-128(%r1)
+	cmpwi	r7,  0x7070
+	bne	1f
+	ld	r8,	-136(%r1)
+	cmpwi	r8,  0x0808
+	bne	1f
+	ld	r9,	-144(%r1)
+	cmpwi	r9,  0x0909
+	bne	1f
+	ld	r10, -152(%r1)
+	cmpwi	r10, 0x1010
+	bne	1f
+	ld	r11, -160(%r1)
+	cmpwi	r11, 0x1111
+	bne	1f
+	ld	r14, -168(%r1)
+	cmpwi	r14, 0x1414
+	bne	1f
+	ld	r15, -176(%r1)
+	cmpwi	r15, 0x1515
+	bne	1f
+	ld	r16, -184(%r1)
+	cmpwi	r16, 0x1616
+	bne	1f
+	ld	r17, -192(%r1)
+	cmpwi	r17, 0x1717
+	bne	1f
+	ld	r18, -200(%r1)
+	cmpwi	r18, 0x1818
+	bne	1f
+	ld	r19, -208(%r1)
+	cmpwi	r19, 0x1919
+	bne	1f
+	ld	r20, -216(%r1)
+	cmpwi	r20, 0x2020
+	bne	1f
+	ld	r21, -224(%r1)
+	cmpwi	r21, 0x2121
+	bne	1f
+	ld	r22, -232(%r1)
+	cmpwi	r22, 0x2222
+	bne	1f
+	ld	r23, -240(%r1)
+	cmpwi	r23, 0x2323
+	bne	1f
+	ld	r24, -248(%r1)
+	cmpwi	r24, 0x2424
+	bne	1f
+	ld	r25, -256(%r1)
+	cmpwi	r25, 0x2525
+	bne	1f
+	ld	r26, -264(%r1)
+	cmpwi	r26, 0x2626
+	bne	1f
+	ld	r27, -272(%r1)
+	cmpwi	r27, 0x2727
+	bne	1f
+	ld	r28, -280(%r1)
+	cmpwi	r28, 0x2828
+	bne	1f
+	ld	r29, -288(%r1)
+	cmpwi	r29, 0x2929
+	bne	1f
+
+	/* Load 0 (success) to return */
+	li	r3, 0
+
+1:	ld	r14, 160(%r1)
+	ld	r15, 152(%r1)
+	ld	r16, 144(%r1)
+	ld	r17, 136(%r1)
+	ld	r18, 128(%r1)
+	ld	r19, 120(%r1)
+	ld	r20, 112(%r1)
+	ld	r21, 104(%r1)
+	ld	r22, 96(%r1)
+	ld	r23, 88(%r1)
+	ld	r24, 80(%r1)
+	ld	r25, 72(%r1)
+	ld	r26, 64(%r1)
+	ld	r27, 56(%r1)
+	ld	r28, 48(%r1)
+	ld	r29, 40(%r1)
+	ld	r30, 32(%r1)
+	ld	r31, 24(%r1)
+	addi	%r1, %r1, 168
+	blr
diff --git a/powerpc/pmu/ebb/cycles_with_mmcr2_test.c b/powerpc/pmu/ebb/cycles_with_mmcr2_test.c
new file mode 100644
index 0000000..d43029b
--- /dev/null
+++ b/powerpc/pmu/ebb/cycles_with_mmcr2_test.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test of counting cycles while manipulating the user accessible bits in MMCR2.
+ */
+
+/* We use two values because the first freezes PMC1 and so we would get no EBBs */
+#define MMCR2_EXPECTED_1 0x4020100804020000UL /* (FC1P|FC2P|FC3P|FC4P|FC5P|FC6P) */
+#define MMCR2_EXPECTED_2 0x0020100804020000UL /* (     FC2P|FC3P|FC4P|FC5P|FC6P) */
+
+
+int cycles_with_mmcr2(void)
+{
+	struct event event;
+	uint64_t val, expected[2], actual;
+	int i;
+	bool bad_mmcr2;
+
+	event_init_named(&event, 0x1001e, "cycles");
+	event_leader_ebb_init(&event);
+
+	event.attr.exclude_kernel = 1;
+	event.attr.exclude_hv = 1;
+	event.attr.exclude_idle = 1;
+
+	FAIL_IF(event_open(&event));
+
+	ebb_enable_pmc_counting(1);
+	setup_ebb_handler(standard_ebb_callee);
+	ebb_global_enable();
+
+	FAIL_IF(ebb_event_enable(&event));
+
+	mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+	/* XXX Set of MMCR2 must be after enable */
+	expected[0] = MMCR2_EXPECTED_1;
+	expected[1] = MMCR2_EXPECTED_2;
+	i = 0;
+	bad_mmcr2 = false;
+
+	/* Make sure we loop until we take at least one EBB */
+	while ((ebb_state.stats.ebb_count < 20 && !bad_mmcr2) ||
+		ebb_state.stats.ebb_count < 1)
+	{
+		mtspr(SPRN_MMCR2, expected[i % 2]);
+
+		FAIL_IF(core_busy_loop());
+
+		val = mfspr(SPRN_MMCR2);
+		if (val != expected[i % 2]) {
+			bad_mmcr2 = true;
+			actual = val;
+		}
+
+		i++;
+	}
+
+	ebb_global_disable();
+	ebb_freeze_pmcs();
+
+	count_pmc(1, sample_period);
+
+	dump_ebb_state();
+
+	event_close(&event);
+
+	FAIL_IF(ebb_state.stats.ebb_count == 0);
+
+	if (bad_mmcr2)
+		printf("Bad MMCR2 value seen is 0x%lx\n", actual);
+
+	FAIL_IF(bad_mmcr2);
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(cycles_with_mmcr2, "cycles_with_mmcr2");
+}
diff --git a/powerpc/pmu/ebb/ebb.c b/powerpc/pmu/ebb/ebb.c
index 1b46be9..d7a72ce 100644
--- a/powerpc/pmu/ebb/ebb.c
+++ b/powerpc/pmu/ebb/ebb.c
@@ -224,6 +224,7 @@ void dump_ebb_hw_state(void)
 
 	printf("HW state:\n"		\
 	       "MMCR0 0x%016x %s\n"	\
+	       "MMCR2 0x%016lx\n"	\
 	       "EBBHR 0x%016lx\n"	\
 	       "BESCR 0x%016llx %s\n"	\
 	       "PMC1  0x%016lx\n"	\
@@ -233,10 +234,11 @@ void dump_ebb_hw_state(void)
 	       "PMC5  0x%016lx\n"	\
 	       "PMC6  0x%016lx\n"	\
 	       "SIAR  0x%016lx\n",
-	       mmcr0, decode_mmcr0(mmcr0), mfspr(SPRN_EBBHR), bescr,
-	       decode_bescr(bescr), mfspr(SPRN_PMC1), mfspr(SPRN_PMC2),
-	       mfspr(SPRN_PMC3), mfspr(SPRN_PMC4), mfspr(SPRN_PMC5),
-	       mfspr(SPRN_PMC6), mfspr(SPRN_SIAR));
+	       mmcr0, decode_mmcr0(mmcr0), mfspr(SPRN_MMCR2),
+	       mfspr(SPRN_EBBHR), bescr, decode_bescr(bescr),
+	       mfspr(SPRN_PMC1), mfspr(SPRN_PMC2), mfspr(SPRN_PMC3),
+	       mfspr(SPRN_PMC4), mfspr(SPRN_PMC5), mfspr(SPRN_PMC6),
+	       mfspr(SPRN_SIAR));
 }
 
 void dump_ebb_state(void)
@@ -335,257 +337,6 @@ void event_leader_ebb_init(struct event *e)
 	e->attr.pinned = 1;
 }
 
-int core_busy_loop(void)
-{
-	int rc;
-
-	asm volatile (
-		"li  3,  0x3030\n"
-		"std 3,  -96(1)\n"
-		"li  4,  0x4040\n"
-		"std 4,  -104(1)\n"
-		"li  5,  0x5050\n"
-		"std 5,  -112(1)\n"
-		"li  6,  0x6060\n"
-		"std 6,  -120(1)\n"
-		"li  7,  0x7070\n"
-		"std 7,  -128(1)\n"
-		"li  8,  0x0808\n"
-		"std 8,  -136(1)\n"
-		"li  9,  0x0909\n"
-		"std 9,  -144(1)\n"
-		"li  10, 0x1010\n"
-		"std 10, -152(1)\n"
-		"li  11, 0x1111\n"
-		"std 11, -160(1)\n"
-		"li  14, 0x1414\n"
-		"std 14, -168(1)\n"
-		"li  15, 0x1515\n"
-		"std 15, -176(1)\n"
-		"li  16, 0x1616\n"
-		"std 16, -184(1)\n"
-		"li  17, 0x1717\n"
-		"std 17, -192(1)\n"
-		"li  18, 0x1818\n"
-		"std 18, -200(1)\n"
-		"li  19, 0x1919\n"
-		"std 19, -208(1)\n"
-		"li  20, 0x2020\n"
-		"std 20, -216(1)\n"
-		"li  21, 0x2121\n"
-		"std 21, -224(1)\n"
-		"li  22, 0x2222\n"
-		"std 22, -232(1)\n"
-		"li  23, 0x2323\n"
-		"std 23, -240(1)\n"
-		"li  24, 0x2424\n"
-		"std 24, -248(1)\n"
-		"li  25, 0x2525\n"
-		"std 25, -256(1)\n"
-		"li  26, 0x2626\n"
-		"std 26, -264(1)\n"
-		"li  27, 0x2727\n"
-		"std 27, -272(1)\n"
-		"li  28, 0x2828\n"
-		"std 28, -280(1)\n"
-		"li  29, 0x2929\n"
-		"std 29, -288(1)\n"
-		"li  30, 0x3030\n"
-		"li  31, 0x3131\n"
-
-		"li    3,  0\n"
-		"0: "
-		"addi  3, 3, 1\n"
-		"cmpwi 3, 100\n"
-		"blt   0b\n"
-
-		/* Return 1 (fail) unless we get through all the checks */
-		"li	0, 1\n"
-
-		/* Check none of our registers have been corrupted */
-		"cmpwi  4,  0x4040\n"
-		"bne	1f\n"
-		"cmpwi  5,  0x5050\n"
-		"bne	1f\n"
-		"cmpwi  6,  0x6060\n"
-		"bne	1f\n"
-		"cmpwi  7,  0x7070\n"
-		"bne	1f\n"
-		"cmpwi  8,  0x0808\n"
-		"bne	1f\n"
-		"cmpwi  9,  0x0909\n"
-		"bne	1f\n"
-		"cmpwi  10, 0x1010\n"
-		"bne	1f\n"
-		"cmpwi  11, 0x1111\n"
-		"bne	1f\n"
-		"cmpwi  14, 0x1414\n"
-		"bne	1f\n"
-		"cmpwi  15, 0x1515\n"
-		"bne	1f\n"
-		"cmpwi  16, 0x1616\n"
-		"bne	1f\n"
-		"cmpwi  17, 0x1717\n"
-		"bne	1f\n"
-		"cmpwi  18, 0x1818\n"
-		"bne	1f\n"
-		"cmpwi  19, 0x1919\n"
-		"bne	1f\n"
-		"cmpwi  20, 0x2020\n"
-		"bne	1f\n"
-		"cmpwi  21, 0x2121\n"
-		"bne	1f\n"
-		"cmpwi  22, 0x2222\n"
-		"bne	1f\n"
-		"cmpwi  23, 0x2323\n"
-		"bne	1f\n"
-		"cmpwi  24, 0x2424\n"
-		"bne	1f\n"
-		"cmpwi  25, 0x2525\n"
-		"bne	1f\n"
-		"cmpwi  26, 0x2626\n"
-		"bne	1f\n"
-		"cmpwi  27, 0x2727\n"
-		"bne	1f\n"
-		"cmpwi  28, 0x2828\n"
-		"bne	1f\n"
-		"cmpwi  29, 0x2929\n"
-		"bne	1f\n"
-		"cmpwi  30, 0x3030\n"
-		"bne	1f\n"
-		"cmpwi  31, 0x3131\n"
-		"bne	1f\n"
-
-		/* Load junk into all our registers before we reload them from the stack. */
-		"li  3,  0xde\n"
-		"li  4,  0xad\n"
-		"li  5,  0xbe\n"
-		"li  6,  0xef\n"
-		"li  7,  0xde\n"
-		"li  8,  0xad\n"
-		"li  9,  0xbe\n"
-		"li  10, 0xef\n"
-		"li  11, 0xde\n"
-		"li  14, 0xad\n"
-		"li  15, 0xbe\n"
-		"li  16, 0xef\n"
-		"li  17, 0xde\n"
-		"li  18, 0xad\n"
-		"li  19, 0xbe\n"
-		"li  20, 0xef\n"
-		"li  21, 0xde\n"
-		"li  22, 0xad\n"
-		"li  23, 0xbe\n"
-		"li  24, 0xef\n"
-		"li  25, 0xde\n"
-		"li  26, 0xad\n"
-		"li  27, 0xbe\n"
-		"li  28, 0xef\n"
-		"li  29, 0xdd\n"
-
-		"ld     3,  -96(1)\n"
-		"cmpwi  3,  0x3030\n"
-		"bne	1f\n"
-		"ld     4,  -104(1)\n"
-		"cmpwi  4,  0x4040\n"
-		"bne	1f\n"
-		"ld     5,  -112(1)\n"
-		"cmpwi  5,  0x5050\n"
-		"bne	1f\n"
-		"ld     6,  -120(1)\n"
-		"cmpwi  6,  0x6060\n"
-		"bne	1f\n"
-		"ld     7,  -128(1)\n"
-		"cmpwi  7,  0x7070\n"
-		"bne	1f\n"
-		"ld     8,  -136(1)\n"
-		"cmpwi  8,  0x0808\n"
-		"bne	1f\n"
-		"ld     9,  -144(1)\n"
-		"cmpwi  9,  0x0909\n"
-		"bne	1f\n"
-		"ld     10, -152(1)\n"
-		"cmpwi  10, 0x1010\n"
-		"bne	1f\n"
-		"ld     11, -160(1)\n"
-		"cmpwi  11, 0x1111\n"
-		"bne	1f\n"
-		"ld     14, -168(1)\n"
-		"cmpwi  14, 0x1414\n"
-		"bne	1f\n"
-		"ld     15, -176(1)\n"
-		"cmpwi  15, 0x1515\n"
-		"bne	1f\n"
-		"ld     16, -184(1)\n"
-		"cmpwi  16, 0x1616\n"
-		"bne	1f\n"
-		"ld     17, -192(1)\n"
-		"cmpwi  17, 0x1717\n"
-		"bne	1f\n"
-		"ld     18, -200(1)\n"
-		"cmpwi  18, 0x1818\n"
-		"bne	1f\n"
-		"ld     19, -208(1)\n"
-		"cmpwi  19, 0x1919\n"
-		"bne	1f\n"
-		"ld     20, -216(1)\n"
-		"cmpwi  20, 0x2020\n"
-		"bne	1f\n"
-		"ld     21, -224(1)\n"
-		"cmpwi  21, 0x2121\n"
-		"bne	1f\n"
-		"ld     22, -232(1)\n"
-		"cmpwi  22, 0x2222\n"
-		"bne	1f\n"
-		"ld     23, -240(1)\n"
-		"cmpwi  23, 0x2323\n"
-		"bne	1f\n"
-		"ld     24, -248(1)\n"
-		"cmpwi  24, 0x2424\n"
-		"bne	1f\n"
-		"ld     25, -256(1)\n"
-		"cmpwi  25, 0x2525\n"
-		"bne	1f\n"
-		"ld     26, -264(1)\n"
-		"cmpwi  26, 0x2626\n"
-		"bne	1f\n"
-		"ld     27, -272(1)\n"
-		"cmpwi  27, 0x2727\n"
-		"bne	1f\n"
-		"ld     28, -280(1)\n"
-		"cmpwi  28, 0x2828\n"
-		"bne	1f\n"
-		"ld     29, -288(1)\n"
-		"cmpwi  29, 0x2929\n"
-		"bne	1f\n"
-
-		/* Load 0 (success) to return */
-		"li	0, 0\n"
-
-		"1: 	mr %0, 0\n"
-
-		: "=r" (rc)
-		: /* no inputs */
-		: "3", "4", "5", "6", "7", "8", "9", "10", "11", "14",
-		  "15", "16", "17", "18", "19", "20", "21", "22", "23",
-		   "24", "25", "26", "27", "28", "29", "30", "31",
-		   "memory"
-	);
-
-	return rc;
-}
-
-int core_busy_loop_with_freeze(void)
-{
-	int rc;
-
-	mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC);
-	rc = core_busy_loop();
-	mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) |  MMCR0_FC);
-
-	return rc;
-}
-
 int ebb_child(union pipe read_pipe, union pipe write_pipe)
 {
 	struct event event;
diff --git a/powerpc/pmu/ebb/ebb.h b/powerpc/pmu/ebb/ebb.h
index e62bde0..e44eee5 100644
--- a/powerpc/pmu/ebb/ebb.h
+++ b/powerpc/pmu/ebb/ebb.h
@@ -70,7 +70,6 @@ int ebb_check_mmcr0(void);
 extern u64 sample_period;
 
 int core_busy_loop(void);
-int core_busy_loop_with_freeze(void);
 int ebb_child(union pipe read_pipe, union pipe write_pipe);
 int catch_sigill(void (*func)(void));
 void write_pmc1(void);
diff --git a/powerpc/pmu/l3_bank_test.c b/powerpc/pmu/l3_bank_test.c
new file mode 100644
index 0000000..77472f3
--- /dev/null
+++ b/powerpc/pmu/l3_bank_test.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "event.h"
+#include "utils.h"
+
+#define MALLOC_SIZE     (0x10000 * 10)  /* Ought to be enough .. */
+
+/*
+ * Tests that the L3 bank handling is correct. We fixed it in commit e9aaac1.
+ */
+static int l3_bank_test(void)
+{
+	struct event event;
+	char *p;
+	int i;
+
+	p = malloc(MALLOC_SIZE);
+	FAIL_IF(!p);
+
+	event_init(&event, 0x84918F);
+
+	FAIL_IF(event_open(&event));
+
+	for (i = 0; i < MALLOC_SIZE; i += 0x10000)
+		p[i] = i;
+
+	event_read(&event);
+	event_report(&event);
+
+	FAIL_IF(event.result.running == 0);
+	FAIL_IF(event.result.enabled == 0);
+
+	event_close(&event);
+	free(p);
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(l3_bank_test, "l3_bank_test");
+}
diff --git a/powerpc/pmu/lib.c b/powerpc/pmu/lib.c
index 0f6a473..9768dea 100644
--- a/powerpc/pmu/lib.c
+++ b/powerpc/pmu/lib.c
@@ -5,10 +5,15 @@
 
 #define _GNU_SOURCE	/* For CPU_ZERO etc. */
 
+#include <elf.h>
 #include <errno.h>
+#include <fcntl.h>
+#include <link.h>
 #include <sched.h>
 #include <setjmp.h>
 #include <stdlib.h>
+#include <sys/stat.h>
+#include <sys/types.h>
 #include <sys/wait.h>
 
 #include "utils.h"
@@ -177,8 +182,8 @@ struct addr_range libc, vdso;
 
 int parse_proc_maps(void)
 {
+	unsigned long start, end;
 	char execute, name[128];
-	uint64_t start, end;
 	FILE *f;
 	int rc;
 
@@ -250,3 +255,46 @@ out_close:
 out:
 	return rc;
 }
+
+static char auxv[4096];
+
+void *get_auxv_entry(int type)
+{
+	ElfW(auxv_t) *p;
+	void *result;
+	ssize_t num;
+	int fd;
+
+	fd = open("/proc/self/auxv", O_RDONLY);
+	if (fd == -1) {
+		perror("open");
+		return NULL;
+	}
+
+	result = NULL;
+
+	num = read(fd, auxv, sizeof(auxv));
+	if (num < 0) {
+		perror("read");
+		goto out;
+	}
+
+	if (num > sizeof(auxv)) {
+		printf("Overflowed auxv buffer\n");
+		goto out;
+	}
+
+	p = (ElfW(auxv_t) *)auxv;
+
+	while (p->a_type != AT_NULL) {
+		if (p->a_type == type) {
+			result = (void *)p->a_un.a_val;
+			break;
+		}
+
+		p++;
+	}
+out:
+	close(fd);
+	return result;
+}
diff --git a/powerpc/pmu/lib.h b/powerpc/pmu/lib.h
index ca5d72a..0f0339c 100644
--- a/powerpc/pmu/lib.h
+++ b/powerpc/pmu/lib.h
@@ -29,6 +29,7 @@ extern int notify_parent(union pipe write_pipe);
 extern int notify_parent_of_error(union pipe write_pipe);
 extern pid_t eat_cpu(int (test_function)(void));
 extern bool require_paranoia_below(int level);
+extern void *get_auxv_entry(int type);
 
 struct addr_range {
 	uint64_t first, last;
diff --git a/powerpc/pmu/per_event_excludes.c b/powerpc/pmu/per_event_excludes.c
new file mode 100644
index 0000000..fddbbc9
--- /dev/null
+++ b/powerpc/pmu/per_event_excludes.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#define _GNU_SOURCE
+
+#include <elf.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <string.h>
+#include <sys/prctl.h>
+
+#include "event.h"
+#include "lib.h"
+#include "utils.h"
+
+/*
+ * Test that per-event excludes work.
+ */
+
+static int per_event_excludes(void)
+{
+	struct event *e, events[4];
+	char *platform;
+	int i;
+
+	platform = (char *)get_auxv_entry(AT_BASE_PLATFORM);
+	FAIL_IF(!platform);
+	SKIP_IF(strcmp(platform, "power8") != 0);
+
+	/*
+	 * We need to create the events disabled, otherwise the running/enabled
+	 * counts don't match up.
+	 */
+	e = &events[0];
+	event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS,
+			PERF_TYPE_HARDWARE, "instructions");
+	e->attr.disabled = 1;
+
+	e = &events[1];
+	event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS,
+			PERF_TYPE_HARDWARE, "instructions(k)");
+	e->attr.disabled = 1;
+	e->attr.exclude_user = 1;
+	e->attr.exclude_hv = 1;
+
+	e = &events[2];
+	event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS,
+			PERF_TYPE_HARDWARE, "instructions(h)");
+	e->attr.disabled = 1;
+	e->attr.exclude_user = 1;
+	e->attr.exclude_kernel = 1;
+
+	e = &events[3];
+	event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS,
+			PERF_TYPE_HARDWARE, "instructions(u)");
+	e->attr.disabled = 1;
+	e->attr.exclude_hv = 1;
+	e->attr.exclude_kernel = 1;
+
+	FAIL_IF(event_open(&events[0]));
+
+	/*
+	 * The open here will fail if we don't have per event exclude support,
+	 * because the second event has an incompatible set of exclude settings
+	 * and we're asking for the events to be in a group.
+	 */
+	for (i = 1; i < 4; i++)
+		FAIL_IF(event_open_with_group(&events[i], events[0].fd));
+
+	/*
+	 * Even though the above will fail without per-event excludes we keep
+	 * testing in order to be thorough.
+	 */
+	prctl(PR_TASK_PERF_EVENTS_ENABLE);
+
+	/* Spin for a while */
+	for (i = 0; i < INT_MAX; i++)
+		asm volatile("" : : : "memory");
+
+	prctl(PR_TASK_PERF_EVENTS_DISABLE);
+
+	for (i = 0; i < 4; i++) {
+		FAIL_IF(event_read(&events[i]));
+		event_report(&events[i]);
+	}
+
+	/*
+	 * We should see that all events have enabled == running. That
+	 * shows that they were all on the PMU at once.
+	 */
+	for (i = 0; i < 4; i++)
+		FAIL_IF(events[i].result.running != events[i].result.enabled);
+
+	/*
+	 * We can also check that the result for instructions is >= all the
+	 * other counts. That's because it is counting all instructions while
+	 * the others are counting a subset.
+	 */
+	for (i = 1; i < 4; i++)
+		FAIL_IF(events[0].result.value < events[i].result.value);
+
+	for (i = 0; i < 4; i++)
+		event_close(&events[i]);
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(per_event_excludes, "per_event_excludes");
+}
diff --git a/ptrace/peeksiginfo.c b/ptrace/peeksiginfo.c
index d46558b..c34cd8a 100644
--- a/ptrace/peeksiginfo.c
+++ b/ptrace/peeksiginfo.c
@@ -31,6 +31,10 @@ static int sys_ptrace(int request, pid_t pid, void *addr, void *data)
 #define TEST_SICODE_PRIV	-1
 #define TEST_SICODE_SHARE	-2
 
+#ifndef PAGE_SIZE
+#define PAGE_SIZE sysconf(_SC_PAGESIZE)
+#endif
+
 #define err(fmt, ...)						\
 		fprintf(stderr,					\
 			"Error (%s:%d): " fmt,			\
diff --git a/rcutorture/bin/kvm-recheck.sh b/rcutorture/bin/kvm-recheck.sh
index ee1f6ca..3f6c9b7 100755
--- a/rcutorture/bin/kvm-recheck.sh
+++ b/rcutorture/bin/kvm-recheck.sh
@@ -54,10 +54,16 @@ do
 			if test -f "$i/qemu-cmd"
 			then
 				print_bug qemu failed
+				echo "   $i"
+			elif test -f "$i/buildonly"
+			then
+				echo Build-only run, no boot/test
+				configcheck.sh $i/.config $i/ConfigFragment
+				parse-build.sh $i/Make.out $configfile
 			else
 				print_bug Build failed
+				echo "   $i"
 			fi
-			echo "   $i"
 		fi
 	done
 done
diff --git a/rcutorture/bin/kvm-test-1-run.sh b/rcutorture/bin/kvm-test-1-run.sh
index 27e544e..0f69dcb 100755
--- a/rcutorture/bin/kvm-test-1-run.sh
+++ b/rcutorture/bin/kvm-test-1-run.sh
@@ -42,6 +42,7 @@ grace=120
 
 T=/tmp/kvm-test-1-run.sh.$$
 trap 'rm -rf $T' 0
+touch $T
 
 . $KVM/bin/functions.sh
 . $KVPATH/ver_functions.sh
@@ -131,7 +132,10 @@ boot_args=$6
 
 cd $KVM
 kstarttime=`awk 'BEGIN { print systime() }' < /dev/null`
-echo ' ---' `date`: Starting kernel
+if test -z "$TORTURE_BUILDONLY"
+then
+	echo ' ---' `date`: Starting kernel
+fi
 
 # Generate -smp qemu argument.
 qemu_args="-nographic $qemu_args"
@@ -157,12 +161,13 @@ boot_args="`configfrag_boot_params "$boot_args" "$config_template"`"
 # Generate kernel-version-specific boot parameters
 boot_args="`per_version_boot_params "$boot_args" $builddir/.config $seconds`"
 
-echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
 if test -n "$TORTURE_BUILDONLY"
 then
 	echo Build-only run specified, boot/test omitted.
+	touch $resdir/buildonly
 	exit 0
 fi
+echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
 ( $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) &
 qemu_pid=$!
 commandcompleted=0
diff --git a/rcutorture/bin/kvm.sh b/rcutorture/bin/kvm.sh
index 40285c5..589e9c3 100644
--- a/rcutorture/bin/kvm.sh
+++ b/rcutorture/bin/kvm.sh
@@ -340,12 +340,18 @@ function dump(first, pastlast)
 	for (j = 1; j < jn; j++) {
 		builddir=KVM "/b" j
 		print "rm -f " builddir ".ready"
-		print "echo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date`";
-		print "echo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date` >> " rd "/log";
+		print "if test -z \"$TORTURE_BUILDONLY\""
+		print "then"
+		print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date`";
+		print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date` >> " rd "/log";
+		print "fi"
 	}
 	print "wait"
-	print "echo ---- All kernel runs complete. `date`";
-	print "echo ---- All kernel runs complete. `date` >> " rd "/log";
+	print "if test -z \"$TORTURE_BUILDONLY\""
+	print "then"
+	print "\techo ---- All kernel runs complete. `date`";
+	print "\techo ---- All kernel runs complete. `date` >> " rd "/log";
+	print "fi"
 	for (j = 1; j < jn; j++) {
 		builddir=KVM "/b" j
 		print "echo ----", cfr[j], cpusr[j] ovf ": Build/run results:";
@@ -385,10 +391,7 @@ echo
 echo
 echo " --- `date` Test summary:"
 echo Results directory: $resdir/$ds
-if test -z "$TORTURE_BUILDONLY"
-then
-	kvm-recheck.sh $resdir/$ds
-fi
+kvm-recheck.sh $resdir/$ds
 ___EOF___
 
 if test "$dryrun" = script
@@ -403,7 +406,7 @@ then
 		sed -e 's/:.*$//' -e 's/^echo //'
 	exit 0
 else
-	# Not a dryru, so run the script.
+	# Not a dryrun, so run the script.
 	sh $T/script
 fi
 
diff --git a/rcutorture/configs/rcu/TREE01 b/rcutorture/configs/rcu/TREE01
index 9c827ec..063b707 100644
--- a/rcutorture/configs/rcu/TREE01
+++ b/rcutorture/configs/rcu/TREE01
@@ -15,7 +15,6 @@ CONFIG_RCU_FANOUT_EXACT=n
 CONFIG_RCU_NOCB_CPU=y
 CONFIG_RCU_NOCB_CPU_ZERO=y
 CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=n
 CONFIG_RCU_CPU_STALL_VERBOSE=n
 CONFIG_RCU_BOOST=n
diff --git a/rcutorture/configs/rcu/TREE02 b/rcutorture/configs/rcu/TREE02
index 1a777b5..ea119ba 100644
--- a/rcutorture/configs/rcu/TREE02
+++ b/rcutorture/configs/rcu/TREE02
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_EXACT=n
 CONFIG_RCU_NOCB_CPU=n
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=n
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=n
 CONFIG_RCU_CPU_STALL_VERBOSE=y
 CONFIG_RCU_BOOST=n
diff --git a/rcutorture/configs/rcu/TREE02-T b/rcutorture/configs/rcu/TREE02-T
index 61c8d9c..19cf948 100644
--- a/rcutorture/configs/rcu/TREE02-T
+++ b/rcutorture/configs/rcu/TREE02-T
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_EXACT=n
 CONFIG_RCU_NOCB_CPU=n
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=n
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=n
 CONFIG_RCU_CPU_STALL_VERBOSE=y
 CONFIG_RCU_BOOST=n
diff --git a/rcutorture/configs/rcu/TREE03 b/rcutorture/configs/rcu/TREE03
index c1f111c..f4567fb 100644
--- a/rcutorture/configs/rcu/TREE03
+++ b/rcutorture/configs/rcu/TREE03
@@ -14,7 +14,6 @@ CONFIG_RCU_FANOUT_LEAF=4
 CONFIG_RCU_FANOUT_EXACT=n
 CONFIG_RCU_NOCB_CPU=n
 CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=n
 CONFIG_RCU_CPU_STALL_VERBOSE=n
 CONFIG_RCU_BOOST=y
diff --git a/rcutorture/configs/rcu/TREE04 b/rcutorture/configs/rcu/TREE04
index 7dbd27c..0a262fb 100644
--- a/rcutorture/configs/rcu/TREE04
+++ b/rcutorture/configs/rcu/TREE04
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_LEAF=2
 CONFIG_RCU_FANOUT_EXACT=n
 CONFIG_RCU_NOCB_CPU=n
 CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=y
 CONFIG_RCU_CPU_STALL_VERBOSE=y
 CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/rcutorture/configs/rcu/TREE05 b/rcutorture/configs/rcu/TREE05
index d0f32e5..3a06b97 100644
--- a/rcutorture/configs/rcu/TREE05
+++ b/rcutorture/configs/rcu/TREE05
@@ -18,7 +18,6 @@ CONFIG_RCU_NOCB_CPU_NONE=y
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_PROVE_RCU=y
-CONFIG_PROVE_RCU_DELAY=y
 CONFIG_RCU_CPU_STALL_INFO=n
 CONFIG_RCU_CPU_STALL_VERBOSE=n
 CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/rcutorture/configs/rcu/TREE06 b/rcutorture/configs/rcu/TREE06
index 2e477df..8f084cc 100644
--- a/rcutorture/configs/rcu/TREE06
+++ b/rcutorture/configs/rcu/TREE06
@@ -19,7 +19,6 @@ CONFIG_RCU_NOCB_CPU=n
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_PROVE_RCU=y
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=n
 CONFIG_RCU_CPU_STALL_VERBOSE=n
 CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
diff --git a/rcutorture/configs/rcu/TREE07 b/rcutorture/configs/rcu/TREE07
index 042f86e..ab62255 100644
--- a/rcutorture/configs/rcu/TREE07
+++ b/rcutorture/configs/rcu/TREE07
@@ -17,7 +17,6 @@ CONFIG_RCU_FANOUT_LEAF=2
 CONFIG_RCU_FANOUT_EXACT=n
 CONFIG_RCU_NOCB_CPU=n
 CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=y
 CONFIG_RCU_CPU_STALL_VERBOSE=n
 CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/rcutorture/configs/rcu/TREE08 b/rcutorture/configs/rcu/TREE08
index 3438cee..69a2e25 100644
--- a/rcutorture/configs/rcu/TREE08
+++ b/rcutorture/configs/rcu/TREE08
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_LEAF=2
 CONFIG_RCU_NOCB_CPU=y
 CONFIG_RCU_NOCB_CPU_ALL=y
 CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=n
 CONFIG_RCU_CPU_STALL_VERBOSE=n
 CONFIG_RCU_BOOST=n
diff --git a/rcutorture/configs/rcu/TREE08-T b/rcutorture/configs/rcu/TREE08-T
index bf4523d..a0f32fb 100644
--- a/rcutorture/configs/rcu/TREE08-T
+++ b/rcutorture/configs/rcu/TREE08-T
@@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_LEAF=2
 CONFIG_RCU_NOCB_CPU=y
 CONFIG_RCU_NOCB_CPU_ALL=y
 CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=n
 CONFIG_RCU_CPU_STALL_VERBOSE=n
 CONFIG_RCU_BOOST=n
diff --git a/rcutorture/configs/rcu/TREE09 b/rcutorture/configs/rcu/TREE09
index 81e4f7c..b7a62a5 100644
--- a/rcutorture/configs/rcu/TREE09
+++ b/rcutorture/configs/rcu/TREE09
@@ -13,7 +13,6 @@ CONFIG_SUSPEND=n
 CONFIG_HIBERNATION=n
 CONFIG_RCU_NOCB_CPU=n
 CONFIG_DEBUG_LOCK_ALLOC=n
-CONFIG_PROVE_RCU_DELAY=n
 CONFIG_RCU_CPU_STALL_INFO=n
 CONFIG_RCU_CPU_STALL_VERBOSE=n
 CONFIG_RCU_BOOST=n
diff --git a/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp b/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp
index ef624ce..a55c008 100644
--- a/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp
+++ b/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp
@@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n
 CONFIG_PREEMPT=y
 #CHECK#CONFIG_TREE_PREEMPT_RCU=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_RCU_DELAY=y
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
 CONFIG_RT_MUTEXES=y
diff --git a/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp b/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp
index ef624ce..a55c008 100644
--- a/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp
+++ b/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp
@@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n
 CONFIG_PREEMPT=y
 #CHECK#CONFIG_TREE_PREEMPT_RCU=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_RCU_DELAY=y
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
 CONFIG_RT_MUTEXES=y
diff --git a/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp b/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp
index ef624ce..a55c008 100644
--- a/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp
+++ b/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp
@@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n
 CONFIG_PREEMPT=y
 #CHECK#CONFIG_TREE_PREEMPT_RCU=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_RCU_DELAY=y
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
 CONFIG_RT_MUTEXES=y
diff --git a/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp b/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp
index ef624ce..a55c008 100644
--- a/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp
+++ b/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp
@@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n
 CONFIG_PREEMPT=y
 #CHECK#CONFIG_TREE_PREEMPT_RCU=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_RCU_DELAY=y
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
 CONFIG_RT_MUTEXES=y
diff --git a/rcutorture/doc/TREE_RCU-kconfig.txt b/rcutorture/doc/TREE_RCU-kconfig.txt
index adbb76c..3e588db 100644
--- a/rcutorture/doc/TREE_RCU-kconfig.txt
+++ b/rcutorture/doc/TREE_RCU-kconfig.txt
@@ -14,7 +14,6 @@ CONFIG_NO_HZ_FULL_SYSIDLE -- Do one.
 CONFIG_PREEMPT -- Do half.  (First three and #8.)
 CONFIG_PROVE_LOCKING -- Do all but two, covering CONFIG_PROVE_RCU and not.
 CONFIG_PROVE_RCU -- Do all but one under CONFIG_PROVE_LOCKING.
-CONFIG_PROVE_RCU_DELAY -- Do one.
 CONFIG_RCU_BOOST -- one of TREE_PREEMPT_RCU.
 CONFIG_RCU_BOOST_PRIO -- set to 2 for _BOOST testing.
 CONFIG_RCU_CPU_STALL_INFO -- do one with and without _VERBOSE.