Merge branch 'master' of git://git.denx.de/u-boot-usb

- DWC3 and UDC cleanup

39 files changed, 857 insertions, 407 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 13ba774a48..7f513ce0ff 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -932,6 +932,7 @@ config ARCH_ZYNQMP_R5
 	select DM_SERIAL
 	select OF_CONTROL
 	imply CMD_DM
+	imply DM_USB_GADGET
 
 config ARCH_ZYNQMP
 	bool "Xilinx ZynqMP based platform"
@@ -949,6 +950,7 @@ config ARCH_ZYNQMP
 	imply CMD_DM
 	imply FAT_WRITE
 	imply MP
+	imply DM_USB_GADGET
 
 config TEGRA
 	bool "NVIDIA Tegra"
diff --git a/arch/arm/dts/omap5-u-boot.dtsi b/arch/arm/dts/omap5-u-boot.dtsi
index bf2684cb61..a6a7801a4b 100644
--- a/arch/arm/dts/omap5-u-boot.dtsi
+++ b/arch/arm/dts/omap5-u-boot.dtsi
@@ -15,6 +15,10 @@
 	ocp {
 		u-boot,dm-spl;
 
+		ocp2scp@4a080000 {
+			compatible = "ti,omap-ocp2scp", "simple-bus";
+		};
+
 		ocp2scp@4a090000 {
 			compatible = "ti,omap-ocp2scp", "simple-bus";
 		};
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index 082fcec3f9..6b1c2692ba 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -460,6 +460,8 @@
 
 		test4 {
 			compatible = "denx,u-boot-probe-test";
+			first-syscon = <&syscon0>;
+			second-sys-ctrl = <&another_system_controller>;
 		};
 	};
 
@@ -540,12 +542,12 @@
 		};
 	};
 
-	syscon@0 {
+	syscon0: syscon@0 {
 		compatible = "sandbox,syscon0";
 		reg = <0x10 16>;
 	};
 
-	syscon@1 {
+	another_system_controller: syscon@1 {
 		compatible = "sandbox,syscon1";
 		reg = <0x20 5
 			0x28 6
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 8e20dc7e43..917f5b18f6 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -665,7 +665,7 @@ int g_dnl_board_usb_cable_connected(void)
 	struct phy phy;
 	int ret;
 
-	ret = uclass_get_device(UCLASS_USB_DEV_GENERIC, 0, &dev);
+	ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, 0, &dev);
 	if (ret) {
 		pr_err("%s: Cannot find USB device\n", __func__);
 		return ret;
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 177a3246c3..8dfb2eea43 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -675,6 +675,19 @@ out:
 	return;
 }
 
+#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
+static int device_okay(const char *path)
+{
+	int node;
+
+	node = fdt_path_offset(gd->fdt_blob, path);
+	if (node < 0)
+		return 0;
+
+	return fdtdec_get_is_enabled(gd->fdt_blob, node);
+}
+#endif
+
 int board_late_init(void)
 {
 	setup_board_eeprom_env();
@@ -714,6 +727,12 @@ int board_late_init(void)
 	board_ti_set_ethaddr(2);
 #endif
 
+#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
+	if (device_okay("/ocp/omap_dwc3_1@48880000"))
+		enable_usb_clocks(0);
+	if (device_okay("/ocp/omap_dwc3_2@488c0000"))
+		enable_usb_clocks(1);
+#endif
 	return 0;
 }
 
@@ -864,93 +883,6 @@ int spl_start_uboot(void)
 }
 #endif
 
-#ifdef CONFIG_USB_DWC3
-static struct dwc3_device usb_otg_ss2 = {
-	.maximum_speed = USB_SPEED_HIGH,
-	.base = DRA7_USB_OTG_SS2_BASE,
-	.tx_fifo_resize = false,
-	.index = 1,
-};
-
-static struct dwc3_omap_device usb_otg_ss2_glue = {
-	.base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
-	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
-	.index = 1,
-};
-
-static struct ti_usb_phy_device usb_phy2_device = {
-	.usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
-	.index = 1,
-};
-
-int usb_gadget_handle_interrupts(int index)
-{
-	u32 status;
-
-	status = dwc3_omap_uboot_interrupt_status(index);
-	if (status)
-		dwc3_uboot_handle_interrupt(index);
-
-	return 0;
-}
-#endif /* CONFIG_USB_DWC3 */
-
-#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
-int board_usb_init(int index, enum usb_init_type init)
-{
-	enable_usb_clocks(index);
-	switch (index) {
-	case 0:
-		if (init == USB_INIT_DEVICE) {
-			printf("port %d can't be used as device\n", index);
-			disable_usb_clocks(index);
-			return -EINVAL;
-		}
-		break;
-	case 1:
-		if (init == USB_INIT_DEVICE) {
-#ifdef CONFIG_USB_DWC3
-			usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
-			usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
-			ti_usb_phy_uboot_init(&usb_phy2_device);
-			dwc3_omap_uboot_init(&usb_otg_ss2_glue);
-			dwc3_uboot_init(&usb_otg_ss2);
-#endif
-		} else {
-			printf("port %d can't be used as host\n", index);
-			disable_usb_clocks(index);
-			return -EINVAL;
-		}
-
-		break;
-	default:
-		printf("Invalid Controller Index\n");
-	}
-
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-#ifdef CONFIG_USB_DWC3
-	switch (index) {
-	case 0:
-	case 1:
-		if (init == USB_INIT_DEVICE) {
-			ti_usb_phy_uboot_exit(index);
-			dwc3_uboot_exit(index);
-			dwc3_omap_uboot_exit(index);
-		}
-		break;
-	default:
-		printf("Invalid Controller Index\n");
-	}
-#endif
-	disable_usb_clocks(index);
-	return 0;
-}
-#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
-
 #ifdef CONFIG_DRIVER_TI_CPSW
 
 /* Delay value to add to calibrated value */
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index bbe54450ae..d69641e3a0 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -646,6 +646,19 @@ int dram_init_banksize(void)
 	return 0;
 }
 
+#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
+static int device_okay(const char *path)
+{
+	int node;
+
+	node = fdt_path_offset(gd->fdt_blob, path);
+	if (node < 0)
+		return 0;
+
+	return fdtdec_get_is_enabled(gd->fdt_blob, node);
+}
+#endif
+
 int board_late_init(void)
 {
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -685,6 +698,12 @@ int board_late_init(void)
 	if (board_is_dra71x_evm())
 		palmas_i2c_write_u8(LP873X_I2C_SLAVE_ADDR, 0x9, 0x7);
 #endif
+#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL)
+	if (device_okay("/ocp/omap_dwc3_1@48880000"))
+		enable_usb_clocks(0);
+	if (device_okay("/ocp/omap_dwc3_2@488c0000"))
+		enable_usb_clocks(1);
+#endif
 	return 0;
 }
 
@@ -896,110 +915,6 @@ const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr)
 }
 #endif
 
-#ifdef CONFIG_USB_DWC3
-static struct dwc3_device usb_otg_ss1 = {
-	.maximum_speed = USB_SPEED_SUPER,
-	.base = DRA7_USB_OTG_SS1_BASE,
-	.tx_fifo_resize = false,
-	.index = 0,
-};
-
-static struct dwc3_omap_device usb_otg_ss1_glue = {
-	.base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE,
-	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
-	.index = 0,
-};
-
-static struct ti_usb_phy_device usb_phy1_device = {
-	.pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL,
-	.usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER,
-	.usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER,
-	.index = 0,
-};
-
-static struct dwc3_device usb_otg_ss2 = {
-	.maximum_speed = USB_SPEED_SUPER,
-	.base = DRA7_USB_OTG_SS2_BASE,
-	.tx_fifo_resize = false,
-	.index = 1,
-};
-
-static struct dwc3_omap_device usb_otg_ss2_glue = {
-	.base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
-	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
-	.index = 1,
-};
-
-static struct ti_usb_phy_device usb_phy2_device = {
-	.usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
-	.index = 1,
-};
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-	enable_usb_clocks(index);
-	switch (index) {
-	case 0:
-		if (init == USB_INIT_DEVICE) {
-			usb_otg_ss1.dr_mode = USB_DR_MODE_PERIPHERAL;
-			usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
-		} else {
-			usb_otg_ss1.dr_mode = USB_DR_MODE_HOST;
-			usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
-		}
-
-		ti_usb_phy_uboot_init(&usb_phy1_device);
-		dwc3_omap_uboot_init(&usb_otg_ss1_glue);
-		dwc3_uboot_init(&usb_otg_ss1);
-		break;
-	case 1:
-		if (init == USB_INIT_DEVICE) {
-			usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
-			usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
-		} else {
-			usb_otg_ss2.dr_mode = USB_DR_MODE_HOST;
-			usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
-		}
-
-		ti_usb_phy_uboot_init(&usb_phy2_device);
-		dwc3_omap_uboot_init(&usb_otg_ss2_glue);
-		dwc3_uboot_init(&usb_otg_ss2);
-		break;
-	default:
-		printf("Invalid Controller Index\n");
-	}
-
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	switch (index) {
-	case 0:
-	case 1:
-		ti_usb_phy_uboot_exit(index);
-		dwc3_uboot_exit(index);
-		dwc3_omap_uboot_exit(index);
-		break;
-	default:
-		printf("Invalid Controller Index\n");
-	}
-	disable_usb_clocks(index);
-	return 0;
-}
-
-int usb_gadget_handle_interrupts(int index)
-{
-	u32 status;
-
-	status = dwc3_omap_uboot_interrupt_status(index);
-	if (status)
-		dwc3_uboot_handle_interrupt(index);
-
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
 int spl_start_uboot(void)
 {
diff --git a/cmd/fastboot.c b/cmd/fastboot.c
index ae3a5f627f..0be83b78ac 100644
--- a/cmd/fastboot.c
+++ b/cmd/fastboot.c
@@ -51,7 +51,7 @@ static int do_fastboot_usb(int argc, char *const argv[],
 		return CMD_RET_FAILURE;
 	}
 
-	ret = board_usb_init(controller_index, USB_INIT_DEVICE);
+	ret = usb_gadget_initialize(controller_index);
 	if (ret) {
 		pr_err("USB init failed: %d\n", ret);
 		return CMD_RET_FAILURE;
@@ -82,7 +82,7 @@ static int do_fastboot_usb(int argc, char *const argv[],
 exit:
 	g_dnl_unregister();
 	g_dnl_clear_detach();
-	board_usb_cleanup(controller_index, USB_INIT_DEVICE);
+	usb_gadget_release(controller_index);
 
 	return ret;
 #else
diff --git a/cmd/rockusb.c b/cmd/rockusb.c
index 8206643b27..e0c1480d6d 100644
--- a/cmd/rockusb.c
+++ b/cmd/rockusb.c
@@ -33,7 +33,7 @@ static int do_rockusb(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 	dev_index = simple_strtoul(devnum, NULL, 0);
 	rockusb_dev_init(devtype, dev_index);
 
-	ret = board_usb_init(controller_index, USB_INIT_DEVICE);
+	ret = usb_gadget_initialize(controller_index);
 	if (ret) {
 		printf("USB init failed: %d\n", ret);
 		return CMD_RET_FAILURE;
@@ -62,7 +62,7 @@ static int do_rockusb(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 exit:
 	g_dnl_unregister();
 	g_dnl_clear_detach();
-	board_usb_cleanup(controller_index, USB_INIT_DEVICE);
+	usb_gadget_release(controller_index);
 
 	return ret;
 }
diff --git a/cmd/thordown.c b/cmd/thordown.c
index 2615adad75..ce3660d174 100644
--- a/cmd/thordown.c
+++ b/cmd/thordown.c
@@ -30,7 +30,7 @@ int do_thor_down(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		goto done;
 
 	int controller_index = simple_strtoul(usb_controller, NULL, 0);
-	ret = board_usb_init(controller_index, USB_INIT_DEVICE);
+	ret = usb_gadget_initialize(controller_index);
 	if (ret) {
 		pr_err("USB init failed: %d\n", ret);
 		ret = CMD_RET_FAILURE;
@@ -55,7 +55,7 @@ int do_thor_down(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 exit:
 	g_dnl_unregister();
-	board_usb_cleanup(controller_index, USB_INIT_DEVICE);
+	usb_gadget_release(controller_index);
 done:
 	dfu_free_entities();
 
diff --git a/cmd/usb_gadget_sdp.c b/cmd/usb_gadget_sdp.c
index ba1f66a5de..808ed974fa 100644
--- a/cmd/usb_gadget_sdp.c
+++ b/cmd/usb_gadget_sdp.c
@@ -20,7 +20,7 @@ static int do_sdp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	char *usb_controller = argv[1];
 	int controller_index = simple_strtoul(usb_controller, NULL, 0);
-	board_usb_init(controller_index, USB_INIT_DEVICE);
+	usb_gadget_initialize(controller_index);
 
 	g_dnl_clear_detach();
 	g_dnl_register("usb_dnl_sdp");
@@ -37,7 +37,7 @@ static int do_sdp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 exit:
 	g_dnl_unregister();
-	board_usb_cleanup(controller_index, USB_INIT_DEVICE);
+	usb_gadget_release(controller_index);
 
 	return ret;
 }
diff --git a/cmd/usb_mass_storage.c b/cmd/usb_mass_storage.c
index 0d551141e0..753ae4f42a 100644
--- a/cmd/usb_mass_storage.c
+++ b/cmd/usb_mass_storage.c
@@ -160,7 +160,7 @@ static int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag,
 
 	controller_index = (unsigned int)(simple_strtoul(
 				usb_controller,	NULL, 0));
-	if (board_usb_init(controller_index, USB_INIT_DEVICE)) {
+	if (usb_gadget_initialize(controller_index)) {
 		pr_err("Couldn't init USB controller.\n");
 		rc = CMD_RET_FAILURE;
 		goto cleanup_ums_init;
@@ -231,7 +231,7 @@ static int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag,
 cleanup_register:
 	g_dnl_unregister();
 cleanup_board:
-	board_usb_cleanup(controller_index, USB_INIT_DEVICE);
+	usb_gadget_release(controller_index);
 cleanup_ums_init:
 	ums_fini();
 
diff --git a/common/dfu.c b/common/dfu.c
index 2620d3238b..44d1484d3d 100644
--- a/common/dfu.c
+++ b/common/dfu.c
@@ -23,9 +23,9 @@ int run_usb_dnl_gadget(int usbctrl_index, char *usb_dnl_gadget)
 	bool dfu_reset = false;
 	int ret, i = 0;
 
-	ret = board_usb_init(usbctrl_index, USB_INIT_DEVICE);
+	ret = usb_gadget_initialize(usbctrl_index);
 	if (ret) {
-		pr_err("board usb init failed\n");
+		pr_err("usb_gadget_initialize failed\n");
 		return CMD_RET_FAILURE;
 	}
 	g_dnl_clear_detach();
@@ -84,7 +84,7 @@ int run_usb_dnl_gadget(int usbctrl_index, char *usb_dnl_gadget)
 	}
 exit:
 	g_dnl_unregister();
-	board_usb_cleanup(usbctrl_index, USB_INIT_DEVICE);
+	usb_gadget_release(usbctrl_index);
 
 	if (dfu_reset)
 		do_reset(NULL, 0, 0, NULL);
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 5242ab6f9f..32a95ea52b 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -50,6 +50,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=1
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_DM_SPI_FLASH=y
@@ -61,6 +62,9 @@ CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y
 CONFIG_DRIVER_TI_CPSW=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_PIPE3_PHY=y
+CONFIG_OMAP_USB2_PHY=y
 CONFIG_DM_PMIC=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_DM_REGULATOR=y
@@ -70,13 +74,15 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_TI_QSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_SPL_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_OMAP_USB_PHY=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index be4aa0f316..6a05738029 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -53,6 +53,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=1
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_DM_SPI_FLASH=y
@@ -64,6 +65,9 @@ CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y
 CONFIG_DRIVER_TI_CPSW=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_PIPE3_PHY=y
+CONFIG_OMAP_USB2_PHY=y
 CONFIG_DM_PMIC=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_DM_REGULATOR=y
@@ -73,13 +77,15 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_TI_QSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_SPL_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_OMAP_USB_PHY=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 27f6b5d981..1d9509c03c 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -56,6 +56,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_PCF8575_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
@@ -72,6 +73,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_SPL_PHY=y
 CONFIG_PIPE3_PHY=y
+CONFIG_OMAP_USB2_PHY=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_PMIC_LP873X=y
 CONFIG_DM_REGULATOR_FIXED=y
@@ -87,14 +89,14 @@ CONFIG_TIMER=y
 CONFIG_OMAP_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+CONFIG_SPL_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_XHCI_DRA7XX_INDEX=1
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_OMAP_USB_PHY=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 651fc4fb42..f3be339fb5 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -56,6 +56,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_DM_GPIO=y
 CONFIG_PCF8575_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
@@ -71,6 +72,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_SPL_PHY=y
 CONFIG_PIPE3_PHY=y
+CONFIG_OMAP_USB2_PHY=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_PMIC_LP873X=y
 CONFIG_DM_REGULATOR_FIXED=y
@@ -86,14 +88,14 @@ CONFIG_TIMER=y
 CONFIG_OMAP_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+CONFIG_SPL_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_XHCI_DRA7XX_INDEX=1
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_OMAP_USB_PHY=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
index 5b3bb8eae7..f0221633fa 100644
--- a/configs/evb-rk3328_defconfig
+++ b/configs/evb-rk3328_defconfig
@@ -49,6 +49,7 @@ CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYSRESET=y
 CONFIG_USB=y
+CONFIG_USB_DWC3=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/drivers/core/syscon-uclass.c b/drivers/core/syscon-uclass.c
index 303e166a69..661cf61d62 100644
--- a/drivers/core/syscon-uclass.c
+++ b/drivers/core/syscon-uclass.c
@@ -53,6 +53,29 @@ static int syscon_pre_probe(struct udevice *dev)
 #endif
 }
 
+struct regmap *syscon_regmap_lookup_by_phandle(struct udevice *dev,
+					       const char *name)
+{
+	struct udevice *syscon;
+	struct regmap *r;
+	int err;
+
+	err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
+					   name, &syscon);
+	if (err) {
+		dev_dbg(dev, "unable to find syscon device\n");
+		return ERR_PTR(err);
+	}
+
+	r = syscon_get_regmap(syscon);
+	if (!r) {
+		dev_dbg(dev, "unable to find regmap\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	return r;
+}
+
 int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp)
 {
 	struct udevice *dev;
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 14d82b93ed..3921e39d7b 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -155,4 +155,13 @@ config MSM8916_USB_PHY
 
 	  This PHY is found on qualcomm dragonboard410c development board.
 
+config OMAP_USB2_PHY
+	bool "Support OMAP's USB2 PHY"
+	depends on PHY
+	depends on SYSCON
+	help
+	  Support for the OMAP's USB2 PHY.
+
+	  This PHY is found on OMAP devices supporting USB2.
+
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 8030d599e7..53dd5bd0f7 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_PHY_RCAR_GEN3) += phy-rcar-gen3.o
 obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o
 obj-$(CONFIG_MESON_GXL_USB_PHY) += meson-gxl-usb2.o meson-gxl-usb3.o
 obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
+obj-$(CONFIG_OMAP_USB2_PHY) += omap-usb2-phy.o
diff --git a/drivers/phy/omap-usb2-phy.c b/drivers/phy/omap-usb2-phy.c
new file mode 100644
index 0000000000..fd20e8c168
--- /dev/null
+++ b/drivers/phy/omap-usb2-phy.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OMAP USB2 PHY LAYER
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
+ * Written by Jean-Jacques Hiblot <jjhiblot@ti.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <syscon.h>
+
+#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT	BIT(0)
+
+#define OMAP_DEV_PHY_PD		BIT(0)
+#define OMAP_USB2_PHY_PD	BIT(28)
+
+#define USB2PHY_DISCON_BYP_LATCH	BIT(31)
+#define USB2PHY_ANA_CONFIG1		(0x4c)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct omap_usb2_phy {
+	struct regmap *pwr_regmap;
+	ulong flags;
+	void *phy_base;
+	u32 pwr_reg_offset;
+};
+
+struct usb_phy_data {
+	const char *label;
+	u8 flags;
+	u32 mask;
+	u32 power_on;
+	u32 power_off;
+};
+
+static const struct usb_phy_data omap5_usb2_data = {
+	.label = "omap5_usb2",
+	.flags = 0,
+	.mask = OMAP_DEV_PHY_PD,
+	.power_off = OMAP_DEV_PHY_PD,
+};
+
+static const struct usb_phy_data dra7x_usb2_data = {
+	.label = "dra7x_usb2",
+	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+	.mask = OMAP_DEV_PHY_PD,
+	.power_off = OMAP_DEV_PHY_PD,
+};
+
+static const struct usb_phy_data dra7x_usb2_phy2_data = {
+	.label = "dra7x_usb2_phy2",
+	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+	.mask = OMAP_USB2_PHY_PD,
+	.power_off = OMAP_USB2_PHY_PD,
+};
+
+static const struct udevice_id omap_usb2_id_table[] = {
+	{
+		.compatible = "ti,omap5-usb2",
+		.data = (ulong)&omap5_usb2_data,
+	},
+	{
+		.compatible = "ti,dra7x-usb2",
+		.data = (ulong)&dra7x_usb2_data,
+	},
+	{
+		.compatible = "ti,dra7x-usb2-phy2",
+		.data = (ulong)&dra7x_usb2_phy2_data,
+	},
+	{},
+};
+
+static int omap_usb_phy_power(struct phy *usb_phy, bool on)
+{
+	struct udevice *dev = usb_phy->dev;
+	const struct usb_phy_data *data;
+	const struct omap_usb2_phy *phy = dev_get_priv(dev);
+	u32 val;
+	int rc;
+
+	data = (const struct usb_phy_data *)dev_get_driver_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	rc = regmap_read(phy->pwr_regmap, phy->pwr_reg_offset, &val);
+	if (rc)
+		return rc;
+	val &= ~data->mask;
+	if (on)
+		val |= data->power_on;
+	else
+		val |= data->power_off;
+	rc = regmap_write(phy->pwr_regmap, phy->pwr_reg_offset, val);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static int omap_usb2_phy_init(struct phy *usb_phy)
+{
+	struct udevice *dev = usb_phy->dev;
+	struct omap_usb2_phy *priv = dev_get_priv(dev);
+	u32 val;
+
+	if (priv->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
+		/*
+		 *
+		 * Reduce the sensitivity of internal PHY by enabling the
+		 * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
+		 * resolves issues with certain devices which can otherwise
+		 * be prone to false disconnects.
+		 *
+		 */
+		val = readl(priv->phy_base + USB2PHY_ANA_CONFIG1);
+		val |= USB2PHY_DISCON_BYP_LATCH;
+		writel(val, priv->phy_base + USB2PHY_ANA_CONFIG1);
+	}
+
+	return 0;
+}
+
+static int omap_usb2_phy_power_on(struct phy *usb_phy)
+{
+	return omap_usb_phy_power(usb_phy, true);
+}
+
+static int omap_usb2_phy_power_off(struct phy *usb_phy)
+{
+	return omap_usb_phy_power(usb_phy, false);
+}
+
+static int omap_usb2_phy_exit(struct phy *usb_phy)
+{
+	return omap_usb_phy_power(usb_phy, false);
+}
+
+struct phy_ops omap_usb2_phy_ops = {
+	.init = omap_usb2_phy_init,
+	.power_on = omap_usb2_phy_power_on,
+	.power_off = omap_usb2_phy_power_off,
+	.exit = omap_usb2_phy_exit,
+};
+
+int omap_usb2_phy_probe(struct udevice *dev)
+{
+	int rc;
+	struct regmap *regmap;
+	struct omap_usb2_phy *priv = dev_get_priv(dev);
+	const struct usb_phy_data *data;
+	u32 tmp[2];
+
+	data = (const struct usb_phy_data *)dev_get_driver_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	if (data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
+		u32 base = dev_read_addr(dev);
+
+		if (base == FDT_ADDR_T_NONE)
+			return -EINVAL;
+		priv->phy_base = (void *)base;
+		priv->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
+	}
+
+	regmap = syscon_regmap_lookup_by_phandle(dev, "syscon-phy-power");
+	if (IS_ERR(regmap)) {
+		printf("can't get regmap (err %ld)\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+	priv->pwr_regmap = regmap;
+
+	rc =  dev_read_u32_array(dev, "syscon-phy-power", tmp, 2);
+	if (rc) {
+		printf("couldn't get power reg. offset (err %d)\n", rc);
+		return rc;
+	}
+	priv->pwr_reg_offset = tmp[1];
+
+	return 0;
+}
+
+U_BOOT_DRIVER(omap_usb2_phy) = {
+	.name = "omap_usb2_phy",
+	.id = UCLASS_PHY,
+	.of_match = omap_usb2_id_table,
+	.probe = omap_usb2_phy_probe,
+	.ops = &omap_usb2_phy_ops,
+	.priv_auto_alloc_size = sizeof(struct omap_usb2_phy),
+};
diff --git a/drivers/phy/ti-pipe3-phy.c b/drivers/phy/ti-pipe3-phy.c
index b22bbaf985..e7e78e3c56 100644
--- a/drivers/phy/ti-pipe3-phy.c
+++ b/drivers/phy/ti-pipe3-phy.c
@@ -141,7 +141,7 @@ static int omap_pipe3_dpll_program(struct omap_pipe3 *pipe3)
 	omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION1, val);
 
 	val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION2);
-	val &= ~PLL_SELFREQDCO_MASK;
+	val &= ~(PLL_SELFREQDCO_MASK | PLL_IDLE);
 	val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
 	omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION2, val);
 
@@ -265,10 +265,13 @@ static int pipe3_exit(struct phy *phy)
 		return -EBUSY;
 	}
 
-	val = readl(pipe3->pll_reset_reg);
-	writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
-	mdelay(1);
-	writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
+	if (pipe3->pll_reset_reg) {
+		val = readl(pipe3->pll_reset_reg);
+		writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
+		mdelay(1);
+		writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
+	}
+
 	return 0;
 }
 
@@ -331,9 +334,11 @@ static int pipe3_phy_probe(struct udevice *dev)
 	if (!pipe3->power_reg)
 		return -EINVAL;
 
-	pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset");
-	if (!pipe3->pll_reset_reg)
-		return -EINVAL;
+	if (device_is_compatible(dev, "ti,phy-pipe3-sata")) {
+		pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset");
+		if (!pipe3->pll_reset_reg)
+			return -EINVAL;
+	}
 
 	pipe3->dpll_map = (struct pipe3_dpll_map *)dev_get_driver_data(dev);
 
@@ -350,8 +355,19 @@ static struct pipe3_dpll_map dpll_map_sata[] = {
 	{ },                                    /* Terminator */
 };
 
+static struct pipe3_dpll_map dpll_map_usb[] = {
+	{12000000, {1250, 5, 4, 20, 0} },	/* 12 MHz */
+	{16800000, {3125, 20, 4, 20, 0} },	/* 16.8 MHz */
+	{19200000, {1172, 8, 4, 20, 65537} },	/* 19.2 MHz */
+	{20000000, {1000, 7, 4, 10, 0} },	/* 20 MHz */
+	{26000000, {1250, 12, 4, 20, 0} },	/* 26 MHz */
+	{38400000, {3125, 47, 4, 20, 92843} },	/* 38.4 MHz */
+	{ },					/* Terminator */
+};
+
 static const struct udevice_id pipe3_phy_ids[] = {
 	{ .compatible = "ti,phy-pipe3-sata", .data = (ulong)&dpll_map_sata },
+	{ .compatible = "ti,omap-usb3", .data = (ulong)&dpll_map_usb},
 	{ }
 };
 
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index d456beb43f..98f83433be 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -52,6 +52,20 @@ config SPL_DM_USB
 	depends on DM_USB
 	default y
 
+config DM_USB_GADGET
+	bool "Enable driver model for USB Gadget"
+	depends on DM_USB
+	help
+	  Enable driver model for USB Gadget (Peripheral
+	  mode)
+
+config SPL_DM_USB_GADGET
+	bool "Enable driver model for USB Gadget in sPL"
+	depends on SPL_DM_USB
+	help
+	  Enable driver model for USB Gadget in SPL
+	  (Peripheral mode)
+
 source "drivers/usb/host/Kconfig"
 
 source "drivers/usb/dwc3/Kconfig"
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 943b7630eb..bbd8105c06 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -38,10 +38,11 @@ config USB_DWC3_OMAP
 	  Say 'Y' here if you have one such device
 
 config USB_DWC3_GENERIC
-	bool "Xilinx ZynqMP and similar Platforms"
-	depends on DM_USB && USB_DWC3
+	bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue)"
+	depends on DM_USB && USB_DWC3 && MISC
 	help
-	  Some platforms can reuse this DWC3 generic implementation.
+	  Select this for Xilinx ZynqMP and similar Platforms.
+	  This wrapper supports Host and Peripheral operation modes.
 
 config USB_DWC3_UNIPHIER
 	bool "DesignWare USB3 Host Support on UniPhier Platforms"
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f1ca6191ce..56e2a046bf 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -19,7 +19,7 @@
 #include <asm/dma-mapping.h>
 #include <linux/ioport.h>
 #include <dm.h>
-
+#include <generic-phy.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
@@ -789,8 +789,92 @@ MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
 
-#if CONFIG_IS_ENABLED(DM_USB)
+#if CONFIG_IS_ENABLED(PHY) && CONFIG_IS_ENABLED(DM_USB)
+int dwc3_setup_phy(struct udevice *dev, struct phy **array, int *num_phys)
+{
+	int i, ret, count;
+	struct phy *usb_phys;
+
+	/* Return if no phy declared */
+	if (!dev_read_prop(dev, "phys", NULL))
+		return 0;
+	count = dev_count_phandle_with_args(dev, "phys", "#phy-cells");
+	if (count <= 0)
+		return count;
+
+	usb_phys = devm_kcalloc(dev, count, sizeof(struct phy),
+				GFP_KERNEL);
+	if (!usb_phys)
+		return -ENOMEM;
+
+	for (i = 0; i < count; i++) {
+		ret = generic_phy_get_by_index(dev, i, &usb_phys[i]);
+		if (ret && ret != -ENOENT) {
+			pr_err("Failed to get USB PHY%d for %s\n",
+			       i, dev->name);
+			return ret;
+		}
+	}
+
+	for (i = 0; i < count; i++) {
+		ret = generic_phy_init(&usb_phys[i]);
+		if (ret) {
+			pr_err("Can't init USB PHY%d for %s\n",
+			       i, dev->name);
+			goto phys_init_err;
+		}
+	}
+
+	for (i = 0; i < count; i++) {
+		ret = generic_phy_power_on(&usb_phys[i]);
+		if (ret) {
+			pr_err("Can't power USB PHY%d for %s\n",
+			       i, dev->name);
+			goto phys_poweron_err;
+		}
+	}
+
+	*array = usb_phys;
+	*num_phys =  count;
+	return 0;
+
+phys_poweron_err:
+	for (i = count - 1; i >= 0; i--)
+		generic_phy_power_off(&usb_phys[i]);
 
+	for (i = 0; i < count; i++)
+		generic_phy_exit(&usb_phys[i]);
+
+	return ret;
+
+phys_init_err:
+	for (; i >= 0; i--)
+		generic_phy_exit(&usb_phys[i]);
+
+	return ret;
+}
+
+int dwc3_shutdown_phy(struct udevice *dev, struct phy *usb_phys, int num_phys)
+{
+	int i, ret;
+
+	for (i = 0; i < num_phys; i++) {
+		if (!generic_phy_valid(&usb_phys[i]))
+			continue;
+
+		ret = generic_phy_power_off(&usb_phys[i]);
+		ret |= generic_phy_exit(&usb_phys[i]);
+		if (ret) {
+			pr_err("Can't shutdown USB PHY%d for %s\n",
+			       i, dev->name);
+		}
+	}
+
+	return 0;
+}
+#endif
+
+#if CONFIG_IS_ENABLED(DM_USB_GADGET)
 int dwc3_init(struct dwc3 *dwc)
 {
 	int ret;
@@ -841,5 +925,4 @@ void dwc3_remove(struct dwc3 *dwc)
 	dwc3_core_exit(dwc);
 	kfree(dwc->mem);
 }
-
 #endif
diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index 56c9fd657f..bc6bba198e 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -8,72 +8,89 @@
  */
 
 #include <common.h>
+#include <asm-generic/io.h>
 #include <dm.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
-#include <linux/usb/otg.h>
-#include <linux/compat.h>
+#include <dwc3-uboot.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <malloc.h>
 #include <usb.h>
 #include "core.h"
 #include "gadget.h"
-#include "linux-compat.h"
+#include <reset.h>
+#include <clk.h>
 
-DECLARE_GLOBAL_DATA_PTR;
+#if CONFIG_IS_ENABLED(DM_USB_GADGET)
+struct dwc3_generic_peripheral {
+	struct dwc3 dwc3;
+	struct phy *phys;
+	int num_phys;
+	fdt_addr_t base;
+};
 
-int usb_gadget_handle_interrupts(int index)
+int dm_usb_gadget_handle_interrupts(struct udevice *dev)
 {
-	struct dwc3 *priv;
-	struct udevice *dev;
-	int ret;
-
-	ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &dev);
-	if (!dev || ret) {
-		pr_err("No USB device found\n");
-		return -ENODEV;
-	}
-
-	priv = dev_get_priv(dev);
+	struct dwc3_generic_peripheral *priv = dev_get_priv(dev);
+	struct dwc3 *dwc3 = &priv->dwc3;
 
-	dwc3_gadget_uboot_handle_interrupt(priv);
+	dwc3_gadget_uboot_handle_interrupt(dwc3);
 
 	return 0;
 }
 
 static int dwc3_generic_peripheral_probe(struct udevice *dev)
 {
-	struct dwc3 *priv = dev_get_priv(dev);
+	int rc;
+	struct dwc3_generic_peripheral *priv = dev_get_priv(dev);
+	struct dwc3 *dwc3 = &priv->dwc3;
 
-	return dwc3_init(priv);
+	rc = dwc3_setup_phy(dev, &priv->phys, &priv->num_phys);
+	if (rc)
+		return rc;
+
+	dwc3->regs = map_physmem(priv->base, DWC3_OTG_REGS_END, MAP_NOCACHE);
+	dwc3->regs += DWC3_GLOBALS_REGS_START;
+	dwc3->dev = dev;
+
+	rc =  dwc3_init(dwc3);
+	if (rc) {
+		unmap_physmem(dwc3->regs, MAP_NOCACHE);
+		return rc;
+	}
+
+	return 0;
 }
 
 static int dwc3_generic_peripheral_remove(struct udevice *dev)
 {
-	struct dwc3 *priv = dev_get_priv(dev);
+	struct dwc3_generic_peripheral *priv = dev_get_priv(dev);
+	struct dwc3 *dwc3 = &priv->dwc3;
 
-	dwc3_remove(priv);
+	dwc3_remove(dwc3);
+	dwc3_shutdown_phy(dev, priv->phys, priv->num_phys);
+	unmap_physmem(dwc3->regs, MAP_NOCACHE);
 
 	return 0;
 }
 
 static int dwc3_generic_peripheral_ofdata_to_platdata(struct udevice *dev)
 {
-	struct dwc3 *priv = dev_get_priv(dev);
+	struct dwc3_generic_peripheral *priv = dev_get_priv(dev);
+	struct dwc3 *dwc3 = &priv->dwc3;
 	int node = dev_of_offset(dev);
 
-	priv->regs = (void *)devfdt_get_addr(dev);
-	priv->regs += DWC3_GLOBALS_REGS_START;
+	priv->base = devfdt_get_addr(dev);
 
-	priv->maximum_speed = usb_get_maximum_speed(node);
-	if (priv->maximum_speed == USB_SPEED_UNKNOWN) {
+	dwc3->maximum_speed = usb_get_maximum_speed(node);
+	if (dwc3->maximum_speed == USB_SPEED_UNKNOWN) {
 		pr_err("Invalid usb maximum speed\n");
 		return -ENODEV;
 	}
 
-	priv->dr_mode = usb_get_dr_mode(node);
-	if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
+	dwc3->dr_mode = usb_get_dr_mode(node);
+	if (dwc3->dr_mode == USB_DR_MODE_UNKNOWN) {
 		pr_err("Invalid usb mode setup\n");
 		return -ENODEV;
 	}
@@ -81,24 +98,112 @@ static int dwc3_generic_peripheral_ofdata_to_platdata(struct udevice *dev)
 	return 0;
 }
 
-static int dwc3_generic_peripheral_bind(struct udevice *dev)
-{
-	return device_probe(dev);
-}
-
 U_BOOT_DRIVER(dwc3_generic_peripheral) = {
 	.name	= "dwc3-generic-peripheral",
-	.id	= UCLASS_USB_DEV_GENERIC,
+	.id	= UCLASS_USB_GADGET_GENERIC,
 	.ofdata_to_platdata = dwc3_generic_peripheral_ofdata_to_platdata,
 	.probe = dwc3_generic_peripheral_probe,
 	.remove = dwc3_generic_peripheral_remove,
-	.bind = dwc3_generic_peripheral_bind,
-	.platdata_auto_alloc_size = sizeof(struct usb_platdata),
-	.priv_auto_alloc_size = sizeof(struct dwc3),
-	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
+	.priv_auto_alloc_size = sizeof(struct dwc3_generic_peripheral),
+};
+#endif
+
+struct dwc3_glue_data {
+	struct clk_bulk		clks;
+	struct reset_ctl_bulk	resets;
+	fdt_addr_t regs;
 };
 
-static int dwc3_generic_bind(struct udevice *parent)
+struct dwc3_glue_ops {
+	void (*select_dr_mode)(struct udevice *dev, int index,
+			       enum usb_dr_mode mode);
+};
+
+void dwc3_ti_select_dr_mode(struct udevice *dev, int index,
+			    enum usb_dr_mode mode)
+{
+#define USBOTGSS_UTMI_OTG_STATUS		0x0084
+#define USBOTGSS_UTMI_OTG_OFFSET		0x0480
+
+/* UTMI_OTG_STATUS REGISTER */
+#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE	BIT(31)
+#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT	BIT(9)
+#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE BIT(8)
+#define USBOTGSS_UTMI_OTG_STATUS_IDDIG		BIT(4)
+#define USBOTGSS_UTMI_OTG_STATUS_SESSEND	BIT(3)
+#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID	BIT(2)
+#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID	BIT(1)
+enum dwc3_omap_utmi_mode {
+	DWC3_OMAP_UTMI_MODE_UNKNOWN = 0,
+	DWC3_OMAP_UTMI_MODE_HW,
+	DWC3_OMAP_UTMI_MODE_SW,
+};
+
+	u32 use_id_pin;
+	u32 host_mode;
+	u32 reg;
+	u32 utmi_mode;
+	u32 utmi_status_offset = USBOTGSS_UTMI_OTG_STATUS;
+
+	struct dwc3_glue_data *glue = dev_get_platdata(dev);
+	void *base = map_physmem(glue->regs, 0x10000, MAP_NOCACHE);
+
+	if (device_is_compatible(dev, "ti,am437x-dwc3"))
+		utmi_status_offset += USBOTGSS_UTMI_OTG_OFFSET;
+
+	utmi_mode = dev_read_u32_default(dev, "utmi-mode",
+					 DWC3_OMAP_UTMI_MODE_UNKNOWN);
+	if (utmi_mode != DWC3_OMAP_UTMI_MODE_HW) {
+		debug("%s: OTG is not supported. defaulting to PERIPHERAL\n",
+		      dev->name);
+		mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	switch (mode)  {
+	case USB_DR_MODE_PERIPHERAL:
+		use_id_pin = 0;
+		host_mode = 0;
+		break;
+	case USB_DR_MODE_HOST:
+		use_id_pin = 0;
+		host_mode = 1;
+		break;
+	case USB_DR_MODE_OTG:
+	default:
+		use_id_pin = 1;
+		host_mode = 0;
+		break;
+	}
+
+	reg = readl(base + utmi_status_offset);
+
+	reg &= ~(USBOTGSS_UTMI_OTG_STATUS_SW_MODE);
+	if (!use_id_pin)
+		reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+
+	writel(reg, base + utmi_status_offset);
+
+	reg &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSEND |
+		USBOTGSS_UTMI_OTG_STATUS_VBUSVALID |
+		USBOTGSS_UTMI_OTG_STATUS_IDDIG);
+
+	reg |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID |
+		USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
+
+	if (!host_mode)
+		reg |= USBOTGSS_UTMI_OTG_STATUS_IDDIG |
+			USBOTGSS_UTMI_OTG_STATUS_VBUSVALID;
+
+	writel(reg, base + utmi_status_offset);
+
+	unmap_physmem(base, MAP_NOCACHE);
+}
+
+struct dwc3_glue_ops ti_ops = {
+	.select_dr_mode = dwc3_ti_select_dr_mode,
+};
+
+static int dwc3_glue_bind(struct udevice *parent)
 {
 	const void *fdt = gd->fdt_blob;
 	int node;
@@ -109,29 +214,32 @@ static int dwc3_generic_bind(struct udevice *parent)
 		const char *name = fdt_get_name(fdt, node, NULL);
 		enum usb_dr_mode dr_mode;
 		struct udevice *dev;
-		const char *driver;
+		const char *driver = NULL;
 
 		debug("%s: subnode name: %s\n", __func__, name);
-		if (strncmp(name, "dwc3@", 4))
-			continue;
 
 		dr_mode = usb_get_dr_mode(node);
 
 		switch (dr_mode) {
 		case USB_DR_MODE_PERIPHERAL:
 		case USB_DR_MODE_OTG:
+#if CONFIG_IS_ENABLED(DM_USB_GADGET)
 			debug("%s: dr_mode: OTG or Peripheral\n", __func__);
 			driver = "dwc3-generic-peripheral";
+#endif
 			break;
 		case USB_DR_MODE_HOST:
 			debug("%s: dr_mode: HOST\n", __func__);
-			driver = "dwc3-generic-host";
+			driver = "xhci-dwc3";
 			break;
 		default:
 			debug("%s: unsupported dr_mode\n", __func__);
 			return -ENODEV;
 		};
 
+		if (!driver)
+			continue;
+
 		ret = device_bind_driver_to_node(parent, driver, name,
 						 offset_to_ofnode(node), &dev);
 		if (ret) {
@@ -144,14 +252,107 @@ static int dwc3_generic_bind(struct udevice *parent)
 	return 0;
 }
 
-static const struct udevice_id dwc3_generic_ids[] = {
+static int dwc3_glue_reset_init(struct udevice *dev,
+				struct dwc3_glue_data *glue)
+{
+	int ret;
+
+	ret = reset_get_bulk(dev, &glue->resets);
+	if (ret == -ENOTSUPP)
+		return 0;
+	else if (ret)
+		return ret;
+
+	ret = reset_deassert_bulk(&glue->resets);
+	if (ret) {
+		reset_release_bulk(&glue->resets);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dwc3_glue_clk_init(struct udevice *dev,
+			      struct dwc3_glue_data *glue)
+{
+	int ret;
+
+	ret = clk_get_bulk(dev, &glue->clks);
+	if (ret == -ENOSYS)
+		return 0;
+	if (ret)
+		return ret;
+
+#if CONFIG_IS_ENABLED(CLK)
+	ret = clk_enable_bulk(&glue->clks);
+	if (ret) {
+		clk_release_bulk(&glue->clks);
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+
+static int dwc3_glue_probe(struct udevice *dev)
+{
+	struct dwc3_glue_ops *ops = (struct dwc3_glue_ops *)dev_get_driver_data(dev);
+	struct dwc3_glue_data *glue = dev_get_platdata(dev);
+	struct udevice *child = NULL;
+	int index = 0;
+	int ret;
+
+	glue->regs = dev_read_addr(dev);
+
+	ret = dwc3_glue_clk_init(dev, glue);
+	if (ret)
+		return ret;
+
+	ret = dwc3_glue_reset_init(dev, glue);
+	if (ret)
+		return ret;
+
+	ret = device_find_first_child(dev, &child);
+	if (ret)
+		return ret;
+
+	while (child) {
+		enum usb_dr_mode dr_mode;
+
+		dr_mode = usb_get_dr_mode(dev_of_offset(child));
+		device_find_next_child(&child);
+		if (ops && ops->select_dr_mode)
+			ops->select_dr_mode(dev, index, dr_mode);
+		index++;
+	}
+
+	return 0;
+}
+
+static int dwc3_glue_remove(struct udevice *dev)
+{
+	struct dwc3_glue_data *glue = dev_get_platdata(dev);
+
+	reset_release_bulk(&glue->resets);
+
+	clk_release_bulk(&glue->clks);
+
+	return dm_scan_fdt_dev(dev);
+}
+
+static const struct udevice_id dwc3_glue_ids[] = {
 	{ .compatible = "xlnx,zynqmp-dwc3" },
+	{ .compatible = "ti,dwc3", .data = (ulong)&ti_ops },
 	{ }
 };
 
 U_BOOT_DRIVER(dwc3_generic_wrapper) = {
 	.name	= "dwc3-generic-wrapper",
 	.id	= UCLASS_MISC,
-	.of_match = dwc3_generic_ids,
-	.bind = dwc3_generic_bind,
+	.of_match = dwc3_glue_ids,
+	.bind = dwc3_glue_bind,
+	.probe = dwc3_glue_probe,
+	.remove = dwc3_glue_remove,
+	.platdata_auto_alloc_size = sizeof(struct dwc3_glue_data),
+
 };
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 4f68887b8d..818efb3e8d 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -12,7 +12,7 @@
  *
  * commit c00552ebaf : Merge 3.18-rc7 into usb-next
  */
-
+#include <common.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 193583b437..3b3d9af681 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -100,9 +100,6 @@ struct eth_dev {
 	struct usb_gadget	*gadget;
 	struct usb_request	*req;		/* for control responses */
 	struct usb_request	*stat_req;	/* for cdc & rndis status */
-#if CONFIG_IS_ENABLED(DM_USB)
-	struct udevice		*usb_udev;
-#endif
 
 	u8			config;
 	struct usb_ep		*in_ep, *out_ep, *status_ep;
@@ -2336,40 +2333,17 @@ fail:
 }
 
 /*-------------------------------------------------------------------------*/
-
-#if CONFIG_IS_ENABLED(DM_USB)
-int dm_usb_init(struct eth_dev *e_dev)
-{
-	struct udevice *dev = NULL;
-	int ret;
-
-	ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &dev);
-	if (!dev || ret) {
-		pr_err("No USB device found\n");
-		return -ENODEV;
-	}
-
-	e_dev->usb_udev = dev;
-
-	return ret;
-}
-#endif
-
 static int _usb_eth_init(struct ether_priv *priv)
 {
 	struct eth_dev *dev = &priv->ethdev;
 	struct usb_gadget *gadget;
 	unsigned long ts;
+	int ret;
 	unsigned long timeout = USB_CONNECT_TIMEOUT;
 
-#if CONFIG_IS_ENABLED(DM_USB)
-	if (dm_usb_init(dev)) {
-		pr_err("USB ether not found\n");
-		return -ENODEV;
-	}
-#else
-	board_usb_init(0, USB_INIT_DEVICE);
-#endif
+	ret = usb_gadget_initialize(0);
+	if (ret)
+		return ret;
 
 	/* Configure default mac-addresses for the USB ethernet device */
 #ifdef CONFIG_USBNET_DEV_ADDR
@@ -2541,9 +2515,7 @@ void _usb_eth_halt(struct ether_priv *priv)
 	}
 
 	usb_gadget_unregister_driver(&priv->eth_driver);
-#if !CONFIG_IS_ENABLED(DM_USB)
-	board_usb_cleanup(0, USB_INIT_DEVICE);
-#endif
+	usb_gadget_release(0);
 }
 
 #ifndef CONFIG_DM_ETH
@@ -2699,7 +2671,7 @@ int usb_ether_init(void)
 	struct udevice *usb_dev;
 	int ret;
 
-	ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &usb_dev);
+	ret = uclass_first_device(UCLASS_USB_GADGET_GENERIC, &usb_dev);
 	if (!usb_dev || ret) {
 		pr_err("No USB device found\n");
 		return ret;
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index 449339f2c4..38ac2dd475 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -2,4 +2,8 @@
 #
 # USB peripheral controller drivers
 
+ifndef CONFIG_$(SPL_)DM_USB_GADGET
 obj-$(CONFIG_USB_DWC3_GADGET)	+= udc-core.o
+endif
+
+obj-$(CONFIG_$(SPL_)DM_USB_GADGET)	+= udc-uclass.o udc-core.o
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index f5c30dd750..62b47781dd 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -18,7 +18,8 @@
 #include <asm/cache.h>
 #include <asm/dma-mapping.h>
 #include <common.h>
-
+#include <dm.h>
+#include <dm/device-internal.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
diff --git a/drivers/usb/gadget/udc/udc-uclass.c b/drivers/usb/gadget/udc/udc-uclass.c
new file mode 100644
index 0000000000..062051857a
--- /dev/null
+++ b/drivers/usb/gadget/udc/udc-uclass.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
+ * Written by Jean-Jacques Hiblot <jjhiblot@ti.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <linux/usb/gadget.h>
+
+#define MAX_UDC_DEVICES 4
+static struct udevice *dev_array[MAX_UDC_DEVICES];
+int usb_gadget_initialize(int index)
+{
+	int ret;
+	struct udevice *dev = NULL;
+
+	if (index < 0 || index >= ARRAY_SIZE(dev_array))
+		return -EINVAL;
+	if (dev_array[index])
+		return 0;
+	ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, index, &dev);
+	if (!dev || ret) {
+		pr_err("No USB device found\n");
+		return -ENODEV;
+	}
+	dev_array[index] = dev;
+	return 0;
+}
+
+int usb_gadget_release(int index)
+{
+#if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE)
+	int ret;
+	if (index < 0 || index >= ARRAY_SIZE(dev_array))
+		return -EINVAL;
+
+	ret = device_remove(dev_array[index], DM_REMOVE_NORMAL);
+	if (!ret)
+		dev_array[index] = NULL;
+	return ret;
+#else
+	return -ENOTSUPP;
+#endif
+}
+
+int usb_gadget_handle_interrupts(int index)
+{
+	if (index < 0 || index >= ARRAY_SIZE(dev_array))
+		return -EINVAL;
+	return dm_usb_gadget_handle_interrupts(dev_array[index]);
+}
+
+UCLASS_DRIVER(usb_gadget_generic) = {
+	.id		= UCLASS_USB_GADGET_GENERIC,
+	.name		= "usb_gadget_generic",
+};
diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index dd0d156027..83b9f119e7 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -12,6 +12,7 @@
 #include <fdtdec.h>
 #include <generic-phy.h>
 #include <usb.h>
+#include <dwc3-uboot.h>
 
 #include "xhci.h"
 #include <asm/io.h>
@@ -110,105 +111,21 @@ void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val)
 }
 
 #if CONFIG_IS_ENABLED(DM_USB)
-static int xhci_dwc3_setup_phy(struct udevice *dev)
-{
-	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
-	int i, ret, count;
-
-	/* Return if no phy declared */
-	if (!dev_read_prop(dev, "phys", NULL))
-		return 0;
-
-	count = dev_count_phandle_with_args(dev, "phys", "#phy-cells");
-	if (count <= 0)
-		return count;
-
-	plat->usb_phys = devm_kcalloc(dev, count, sizeof(struct phy),
-				      GFP_KERNEL);
-	if (!plat->usb_phys)
-		return -ENOMEM;
-
-	for (i = 0; i < count; i++) {
-		ret = generic_phy_get_by_index(dev, i, &plat->usb_phys[i]);
-		if (ret && ret != -ENOENT) {
-			pr_err("Failed to get USB PHY%d for %s\n",
-			       i, dev->name);
-			return ret;
-		}
-
-		++plat->num_phys;
-	}
-
-	for (i = 0; i < plat->num_phys; i++) {
-		ret = generic_phy_init(&plat->usb_phys[i]);
-		if (ret) {
-			pr_err("Can't init USB PHY%d for %s\n",
-			       i, dev->name);
-			goto phys_init_err;
-		}
-	}
-
-	for (i = 0; i < plat->num_phys; i++) {
-		ret = generic_phy_power_on(&plat->usb_phys[i]);
-		if (ret) {
-			pr_err("Can't power USB PHY%d for %s\n",
-			       i, dev->name);
-			goto phys_poweron_err;
-		}
-	}
-
-	return 0;
-
-phys_poweron_err:
-	for (; i >= 0; i--)
-		generic_phy_power_off(&plat->usb_phys[i]);
-
-	for (i = 0; i < plat->num_phys; i++)
-		generic_phy_exit(&plat->usb_phys[i]);
-
-	return ret;
-
-phys_init_err:
-	for (; i >= 0; i--)
-		generic_phy_exit(&plat->usb_phys[i]);
-
-	return ret;
-}
-
-static int xhci_dwc3_shutdown_phy(struct udevice *dev)
-{
-	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
-	int i, ret;
-
-	for (i = 0; i < plat->num_phys; i++) {
-		if (!generic_phy_valid(&plat->usb_phys[i]))
-			continue;
-
-		ret = generic_phy_power_off(&plat->usb_phys[i]);
-		ret |= generic_phy_exit(&plat->usb_phys[i]);
-		if (ret) {
-			pr_err("Can't shutdown USB PHY%d for %s\n",
-			       i, dev->name);
-		}
-	}
-
-	return 0;
-}
-
 static int xhci_dwc3_probe(struct udevice *dev)
 {
 	struct xhci_hcor *hcor;
 	struct xhci_hccr *hccr;
 	struct dwc3 *dwc3_reg;
 	enum usb_dr_mode dr_mode;
+	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
 	int ret;
 
 	hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev));
 	hcor = (struct xhci_hcor *)((uintptr_t)hccr +
 			HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
 
-	ret = xhci_dwc3_setup_phy(dev);
-	if (ret)
+	ret = dwc3_setup_phy(dev, &plat->usb_phys, &plat->num_phys);
+	if (ret && (ret != -ENOTSUPP))
 		return ret;
 
 	dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET);
@@ -227,7 +144,9 @@ static int xhci_dwc3_probe(struct udevice *dev)
 
 static int xhci_dwc3_remove(struct udevice *dev)
 {
-	xhci_dwc3_shutdown_phy(dev);
+	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
+
+	dwc3_shutdown_phy(dev, plat->usb_phys, plat->num_phys);
 
 	return xhci_deregister(dev);
 }
diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c
index 58aed72b7d..32743aa72c 100644
--- a/drivers/usb/musb-new/omap2430.c
+++ b/drivers/usb/musb-new/omap2430.c
@@ -263,7 +263,7 @@ U_BOOT_DRIVER(omap2430_musb) = {
 #ifdef CONFIG_USB_MUSB_HOST
 	.id		= UCLASS_USB,
 #else
-	.id		= UCLASS_USB_DEV_GENERIC,
+	.id		= UCLASS_USB_GADGET_GENERIC,
 #endif
 	.of_match = omap2430_musb_ids,
 	.ofdata_to_platdata = omap2430_musb_ofdata_to_platdata,
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index 6cf9826cda..d7170a3078 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -535,7 +535,7 @@ U_BOOT_DRIVER(usb_musb) = {
 #ifdef CONFIG_USB_MUSB_HOST
 	.id		= UCLASS_USB,
 #else
-	.id		= UCLASS_USB_DEV_GENERIC,
+	.id		= UCLASS_USB_GADGET_GENERIC,
 #endif
 	.of_match	= sunxi_musb_ids,
 	.probe		= musb_usb_probe,
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 037af0460c..5d4e207fd1 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -94,6 +94,7 @@ enum uclass_id {
 	UCLASS_USB,		/* USB bus */
 	UCLASS_USB_DEV_GENERIC,	/* USB generic device */
 	UCLASS_USB_HUB,		/* USB hub */
+	UCLASS_USB_GADGET_GENERIC,	/* USB generic device */
 	UCLASS_VIDEO,		/* Video or LCD device */
 	UCLASS_VIDEO_BRIDGE,	/* Video bridge, e.g. DisplayPort to LVDS */
 	UCLASS_VIDEO_CONSOLE,	/* Text console driver for video device */
diff --git a/include/dwc3-uboot.h b/include/dwc3-uboot.h
index 228ab3b102..9941cc37a3 100644
--- a/include/dwc3-uboot.h
+++ b/include/dwc3-uboot.h
@@ -38,4 +38,23 @@ struct dwc3_device {
 int dwc3_uboot_init(struct dwc3_device *dev);
 void dwc3_uboot_exit(int index);
 void dwc3_uboot_handle_interrupt(int index);
+
+struct phy;
+#if CONFIG_IS_ENABLED(PHY) && CONFIG_IS_ENABLED(DM_USB)
+int dwc3_setup_phy(struct udevice *dev, struct phy **array, int *num_phys);
+int dwc3_shutdown_phy(struct udevice *dev, struct phy *usb_phys, int num_phys);
+#else
+static inline int dwc3_setup_phy(struct udevice *dev, struct phy **array,
+				 int *num_phys)
+{
+	return -ENOTSUPP;
+}
+
+static inline int dwc3_shutdown_phy(struct udevice *dev, struct phy *usb_phys,
+				    int num_phys)
+{
+	return -ENOTSUPP;
+}
+#endif
+
 #endif /* __DWC3_UBOOT_H_ */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index b824f13477..497798a32a 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -19,6 +19,7 @@
 #define __LINUX_USB_GADGET_H
 
 #include <errno.h>
+#include <usb.h>
 #include <linux/compat.h>
 #include <linux/list.h>
 
@@ -926,4 +927,21 @@ extern void usb_ep_autoconfig_reset(struct usb_gadget *);
 
 extern int usb_gadget_handle_interrupts(int index);
 
+#if CONFIG_IS_ENABLED(DM_USB_GADGET)
+int usb_gadget_initialize(int index);
+int usb_gadget_release(int index);
+int dm_usb_gadget_handle_interrupts(struct udevice *dev);
+#else
+#include <usb.h>
+static inline int usb_gadget_initialize(int index)
+{
+	return board_usb_init(index, USB_INIT_DEVICE);
+}
+
+static inline int usb_gadget_release(int index)
+{
+	return board_usb_cleanup(index, USB_INIT_DEVICE);
+}
+#endif
+
 #endif	/* __LINUX_USB_GADGET_H */
diff --git a/include/syscon.h b/include/syscon.h
index 2aa73e520a..3df96e3276 100644
--- a/include/syscon.h
+++ b/include/syscon.h
@@ -74,6 +74,19 @@ int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp);
 struct regmap *syscon_get_regmap_by_driver_data(ulong driver_data);
 
 /**
+ * syscon_regmap_lookup_by_phandle() - Look up a controller by a phandle
+ *
+ * This operates by looking up the given name in the device (device
+ * tree property) of the device using the system controller.
+ *
+ * @dev:	Device using the system controller
+ * @name:	Name of property referring to the system controller
+ * @return	A pointer to the regmap if found, ERR_PTR(-ve) on error
+ */
+struct regmap *syscon_regmap_lookup_by_phandle(struct udevice *dev,
+					       const char *name);
+
+/**
  * syscon_get_first_range() - get the first memory range from a syscon regmap
  *
  * @driver_data:	Driver data value to look up
diff --git a/test/dm/syscon.c b/test/dm/syscon.c
index 77c79285d9..a294dda02e 100644
--- a/test/dm/syscon.c
+++ b/test/dm/syscon.c
@@ -6,6 +6,7 @@
 #include <common.h>
 #include <dm.h>
 #include <syscon.h>
+#include <regmap.h>
 #include <asm/test.h>
 #include <dm/test.h>
 #include <test/ut.h>
@@ -43,3 +44,31 @@ static int dm_test_syscon_by_driver_data(struct unit_test_state *uts)
 	return 0;
 }
 DM_TEST(dm_test_syscon_by_driver_data, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+/* Test system controller by phandle */
+static int dm_test_syscon_by_phandle(struct unit_test_state *uts)
+{
+	struct udevice *dev;
+	struct regmap *map;
+
+	ut_assertok(uclass_get_device_by_name(UCLASS_TEST_PROBE, "test4",
+					      &dev));
+
+	ut_assertok_ptr(syscon_regmap_lookup_by_phandle(dev, "first-syscon"));
+	map = syscon_regmap_lookup_by_phandle(dev, "first-syscon");
+	ut_assert(map);
+	ut_assert(!IS_ERR(map));
+	ut_asserteq(1, map->range_count);
+
+	ut_assertok_ptr(syscon_regmap_lookup_by_phandle(dev,
+							"second-sys-ctrl"));
+	map = syscon_regmap_lookup_by_phandle(dev, "second-sys-ctrl");
+	ut_assert(map);
+	ut_assert(!IS_ERR(map));
+	ut_asserteq(4, map->range_count);
+
+	ut_assert(IS_ERR(syscon_regmap_lookup_by_phandle(dev, "not-present")));
+
+	return 0;
+}
+DM_TEST(dm_test_syscon_by_phandle, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);