aboutsummaryrefslogtreecommitdiff
path: root/Documentation/powerpc/SBC8260_memory_mapping.txt
blob: e6e9ee0506c3ee522cd63fc96179a1fcf4d68254 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com)
if you have questions, comments or corrections.

	* EST SBC8260 Linux memory mapping rules

	http://www.estc.com/ 
	http://www.estc.com/products/boards/SBC8260-8240_ds.html

	Initial conditions:
	-------------------
	
	Tasks that need to be perform by the boot ROM before control is
	transferred to zImage (compressed Linux kernel):

	- Define the IMMR to 0xf0000000

	- Initialize the memory controller so that RAM is available at
	  physical address 0x00000000.  On the SBC8260 is this 16M (64M)
	  SDRAM.

	- The boot ROM should only clear the RAM that it is using.

	  The reason for doing this is to enhances the chances of a
	  successful post mortem on a Linux panic.  One of the first
	  items to examine is the 16k (LOG_BUF_LEN) circular console
	  buffer called log_buf which is defined in kernel/printk.c.

	- To enhance boot ROM performance, the I-cache can be enabled.

	  Date: Mon, 22 May 2000 14:21:10 -0700
	  From: Neil Russell <caret@c-side.com>

	  LiMon (LInux MONitor) runs with and starts Linux with MMU
	  off, I-cache enabled, D-cache disabled.  The I-cache doesn't
	  need hints from the MMU to work correctly as the D-cache
	  does.  No D-cache means no special code to handle devices in
	  the presence of cache (no snooping, etc). The use of the
	  I-cache means that the monitor can run acceptably fast
	  directly from ROM, rather than having to copy it to RAM.

	- Build the board information structure (see 
	  include/asm-ppc/est8260.h for its definition)

	- The compressed Linux kernel (zImage) contains a bootstrap loader 
	  that is position independent; you can load it into any RAM, 
	  ROM or FLASH memory address >= 0x00500000 (above 5 MB), or
	  at its link address of 0x00400000 (4 MB).

	  Note: If zImage is loaded at its link address of 0x00400000 (4 MB),
	        then zImage will skip the step of moving itself to 
		its link address.

	- Load R3 with the address of the board information structure

	- Transfer control to zImage

	- The Linux console port is SMC1, and the baud rate is controlled
	  from the bi_baudrate field of the board information structure.
	  On thing to keep in mind when picking the baud rate, is that
	  there is no flow control on the SMC ports.  I would stick
	  with something safe and standard like 19200.

	  On the EST SBC8260, the SMC1 port is on the COM1 connector of
	  the board.

	
	EST SBC8260 defaults:
	---------------------

                                Chip
        Memory                  Sel  Bus   Use
        ---------------------   ---  ---   ----------------------------------
	0x00000000-0x03FFFFFF   CS2  60x   (16M or 64M)/64M SDRAM
	0x04000000-0x04FFFFFF   CS4  local  4M/16M SDRAM (soldered to the board)
	0x21000000-0x21000000   CS7  60x    1B/64K Flash present detect (from the flash SIMM)
	0x21000001-0x21000001   CS7  60x    1B/64K Switches (read) and LEDs (write)
	0x22000000-0x2200FFFF   CS5  60x    8K/64K EEPROM
	0xFC000000-0xFCFFFFFF   CS6  60x    2M/16M flash (8 bits wide, soldered to the board)
	0xFE000000-0xFFFFFFFF   CS0  60x    4M/16M flash (SIMM)

	Notes:
	------

	- The chip selects can map 32K blocks and up (powers of 2)

	- The SDRAM machine can handled up to 128Mbytes per chip select

	- Linux uses the 60x bus memory (the SDRAM DIMM) for the 
	  communications buffers.

	- BATs can map 128K-256Mbytes each.  There are four data BATs and
	  four instruction BATs.  Generally the data and instruction BATs
	  are mapped the same.

	- The IMMR must be set above the kernel virtual memory addresses,
	  which start at 0xC0000000.  Otherwise, the kernel may crash as
	  soon as you start any threads or processes due to VM collisions 
	  in the kernel or user process space.


	  Details from Dan Malek <dan_malek@mvista.com> on 10/29/1999:

	  The user application virtual space consumes the first 2 Gbytes
	  (0x00000000 to 0x7FFFFFFF).  The kernel virtual text starts at
	  0xC0000000, with data following.  There is a "protection hole"
	  between the end of kernel data and the start of the kernel
	  dynamically allocated space, but this space is still within
	  0xCxxxxxxx.

	  Obviously the kernel can't map any physical addresses 1:1 in
	  these ranges.


	  Details from Dan Malek <dan_malek@mvista.com> on 5/19/2000:

	  During the early kernel initialization, the kernel virtual
	  memory allocator is not operational.  Prior to this KVM
	  initialization, we choose to map virtual to physical addresses
	  1:1.  That is, the kernel virtual address exactly matches the
	  physical address on the bus.  These mappings are typically done
	  in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c.  Only
	  absolutely necessary mappings should be done at this time, for
	  example board control registers or a serial uart.  Normal device
	  driver initialization should map resources later when necessary.

	  Although platform dependent, and certainly the case for embedded
	  8xx, traditionally memory is mapped at physical address zero,
	  and I/O devices above physical address 0x80000000.  The lowest
	  and highest (above 0xf0000000) I/O addresses are traditionally 
	  used for devices or registers we need to map during kernel 
	  initialization and prior to KVM operation.  For this reason, 
	  and since it followed prior PowerPC platform examples, I chose 
	  to map the embedded 8xx kernel to the 0xc0000000 virtual address.
	  This way, we can enable the MMU to map the kernel for proper 
	  operation, and still map a few windows before the KVM is operational.

	  On some systems, you could possibly run the kernel at the 
	  0x80000000 or any other virtual address.  It just depends upon 
	  mapping that must be done prior to KVM operational.  You can never 
	  map devices or kernel spaces that overlap with the user virtual 
	  space.  This is why default IMMR mapping used by most BDM tools 
	  won't work.  They put the IMMR at something like 0x10000000 or 
	  0x02000000 for example.  You simply can't map these addresses early
	  in the kernel, and continue proper system operation.

	  The embedded 8xx/82xx kernel is mature enough that all you should 
	  need to do is map the IMMR someplace at or above 0xf0000000 and it 
	  should boot far enough to get serial console messages and KGDB 
	  connected on any platform.  There are lots of other subtle memory 
	  management design features that you simply don't need to worry 
	  about.  If you are changing functions related to MMU initialization,
	  you are likely breaking things that are known to work and are 
	  heading down a path of disaster and frustration.  Your changes 
	  should be to make the flexibility of the processor fit Linux, 
	  not force arbitrary and non-workable memory mappings into Linux.

	- You don't want to change KERNELLOAD or KERNELBASE, otherwise the
	  virtual memory and MMU code will get confused.
	
	  arch/ppc/Makefile:KERNELLOAD = 0xc0000000

	  include/asm-ppc/page.h:#define PAGE_OFFSET    0xc0000000
	  include/asm-ppc/page.h:#define KERNELBASE     PAGE_OFFSET

	- RAM is at physical address 0x00000000, and gets mapped to 
	  virtual address 0xC0000000 for the kernel.


	Physical addresses used by the Linux kernel:
	--------------------------------------------

	0x00000000-0x3FFFFFFF   1GB reserved for RAM
	0xF0000000-0xF001FFFF   128K IMMR  64K used for dual port memory,
                                 64K for 8260 registers

	
        Logical addresses used by the Linux kernel:
	-------------------------------------------

	0xF0000000-0xFFFFFFFF   256M BAT0 (IMMR: dual port RAM, registers)
	0xE0000000-0xEFFFFFFF   256M BAT1 (I/O space for custom boards)
	0xC0000000-0xCFFFFFFF   256M BAT2 (RAM)
	0xD0000000-0xDFFFFFFF   256M BAT3 (if RAM > 256MByte)


	EST SBC8260 Linux mapping:
	--------------------------

	DBAT0, IBAT0, cache inhibited:

                                Chip
        Memory                  Sel  Use
        ---------------------   ---  ---------------------------------
        0xF0000000-0xF001FFFF   n/a  IMMR: dual port RAM, registers

        DBAT1, IBAT1, cache inhibited: