diff options
Diffstat (limited to 'drivers/usb/input/ati_remote.c')
| -rw-r--r-- | drivers/usb/input/ati_remote.c | 247 |
1 files changed, 114 insertions, 133 deletions
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 860df26323b1..db95c975952b 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -1,15 +1,15 @@ -/* +/* * USB ATI Remote support * * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net> * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev * * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including - * porting to the 2.6 kernel interfaces, along with other modification + * porting to the 2.6 kernel interfaces, along with other modification * to better match the style of the existing usb/input drivers. However, the * protocol and hardware handling is essentially unchanged from 2.1.1. - * - * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by + * + * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by * Vojtech Pavlik. * * Changes: @@ -23,64 +23,64 @@ * Added support for the "Lola" remote contributed by: * Seth Cohn <sethcohn@yahoo.com> * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or + * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Hardware & software notes * - * These remote controls are distributed by ATI as part of their - * "All-In-Wonder" video card packages. The receiver self-identifies as a + * These remote controls are distributed by ATI as part of their + * "All-In-Wonder" video card packages. The receiver self-identifies as a * "USB Receiver" with manufacturer "X10 Wireless Technology Inc". * - * The "Lola" remote is available from X10. See: + * The "Lola" remote is available from X10. See: * http://www.x10.com/products/lola_sg1.htm * The Lola is similar to the ATI remote but has no mouse support, and slightly * different keys. * - * It is possible to use multiple receivers and remotes on multiple computers + * It is possible to use multiple receivers and remotes on multiple computers * simultaneously by configuring them to use specific channels. - * - * The RF protocol used by the remote supports 16 distinct channels, 1 to 16. - * Actually, it may even support more, at least in some revisions of the + * + * The RF protocol used by the remote supports 16 distinct channels, 1 to 16. + * Actually, it may even support more, at least in some revisions of the * hardware. * * Each remote can be configured to transmit on one channel as follows: - * - Press and hold the "hand icon" button. - * - When the red LED starts to blink, let go of the "hand icon" button. - * - When it stops blinking, input the channel code as two digits, from 01 + * - Press and hold the "hand icon" button. + * - When the red LED starts to blink, let go of the "hand icon" button. + * - When it stops blinking, input the channel code as two digits, from 01 * to 16, and press the hand icon again. - * + * * The timing can be a little tricky. Try loading the module with debug=1 * to have the kernel print out messages about the remote control number * and mask. Note: debugging prints remote numbers as zero-based hexadecimal. * * The driver has a "channel_mask" parameter. This bitmask specifies which - * channels will be ignored by the module. To mask out channels, just add + * channels will be ignored by the module. To mask out channels, just add * all the 2^channel_number values together. * * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote - * ignore signals coming from remote controls transmitting on channel 4, but + * ignore signals coming from remote controls transmitting on channel 4, but * accept all other channels. * - * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be + * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be * ignored. * - * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this + * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this * parameter are unused. * */ @@ -99,13 +99,13 @@ /* * Module and Version Information, Module Parameters */ - -#define ATI_REMOTE_VENDOR_ID 0x0bc7 -#define ATI_REMOTE_PRODUCT_ID 0x004 -#define LOLA_REMOTE_PRODUCT_ID 0x002 + +#define ATI_REMOTE_VENDOR_ID 0x0bc7 +#define ATI_REMOTE_PRODUCT_ID 0x004 +#define LOLA_REMOTE_PRODUCT_ID 0x002 #define MEDION_REMOTE_PRODUCT_ID 0x006 -#define DRIVER_VERSION "2.2.1" +#define DRIVER_VERSION "2.2.1" #define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>" #define DRIVER_DESC "ATI/X10 RF USB Remote Control" @@ -113,18 +113,18 @@ #define DATA_BUFSIZE 63 /* size of URB data buffers */ #define ATI_INPUTNUM 1 /* Which input device to register as */ -static unsigned long channel_mask = 0; +static unsigned long channel_mask; module_param(channel_mask, ulong, 0444); MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore"); -static int debug = 0; +static int debug; module_param(debug, int, 0444); MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); #define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0) #undef err #define err(format, arg...) printk(KERN_ERR format , ## arg) - + static struct usb_device_id ati_remote_table[] = { { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) }, { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) }, @@ -148,7 +148,7 @@ static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; /* Acceleration curve for directional control pad */ static char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; -/* Duplicate event filtering time. +/* Duplicate event filtering time. * Sequential, identical KIND_FILTERED inputs with less than * FILTER_TIME jiffies between them are considered as repeat * events. The hardware generates 5 events for the first keypress @@ -161,10 +161,10 @@ static char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; static DECLARE_MUTEX(disconnect_sem); struct ati_remote { - struct input_dev idev; + struct input_dev idev; struct usb_device *udev; struct usb_interface *interface; - + struct urb *irq_urb; struct urb *out_urb; struct usb_endpoint_descriptor *endpoint_in; @@ -174,13 +174,11 @@ struct ati_remote { dma_addr_t inbuf_dma; dma_addr_t outbuf_dma; - int open; /* open counter */ - unsigned char old_data[2]; /* Detect duplicate events */ unsigned long old_jiffies; unsigned long acc_jiffies; /* handle acceleration */ unsigned int repeat_count; - + char name[NAME_BUFSIZE]; char phys[NAME_BUFSIZE]; @@ -206,14 +204,14 @@ static struct int type; unsigned int code; int value; -} ati_remote_tbl[] = +} ati_remote_tbl[] = { /* Directional control pad axes */ {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */ {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */ - /* Directional control pad diagonals */ + /* Directional control pad diagonals */ {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */ {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */ {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */ @@ -225,7 +223,7 @@ static struct {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ - /* Artificial "doubleclick" events are generated by the hardware. + /* Artificial "doubleclick" events are generated by the hardware. * They are mapped to the "side" and "extra" mouse buttons here. */ {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ @@ -273,15 +271,15 @@ static struct {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */ {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */ {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */ - {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */ + {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */ {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */ {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */ {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */ {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */ {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */ {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */ - {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */ - + {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */ + {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0} }; @@ -315,7 +313,7 @@ static void ati_remote_dump(unsigned char *data, unsigned int len) if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00)) warn("Weird byte 0x%02x", data[0]); else if (len == 4) - warn("Weird key %02x %02x %02x %02x", + warn("Weird key %02x %02x %02x %02x", data[0], data[1], data[2], data[3]); else warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...", @@ -328,25 +326,16 @@ static void ati_remote_dump(unsigned char *data, unsigned int len) static int ati_remote_open(struct input_dev *inputdev) { struct ati_remote *ati_remote = inputdev->private; - int retval = 0; - - down(&disconnect_sem); - - if (ati_remote->open++) - goto exit; /* On first open, submit the read urb which was set up previously. */ ati_remote->irq_urb->dev = ati_remote->udev; if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) { - dev_err(&ati_remote->interface->dev, + dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb failed!\n", __FUNCTION__); - ati_remote->open--; - retval = -EIO; + return -EIO; } -exit: - up(&disconnect_sem); - return retval; + return 0; } /* @@ -355,9 +344,8 @@ exit: static void ati_remote_close(struct input_dev *inputdev) { struct ati_remote *ati_remote = inputdev->private; - - if (!--ati_remote->open) - usb_kill_urb(ati_remote->irq_urb); + + usb_kill_urb(ati_remote->irq_urb); } /* @@ -366,13 +354,13 @@ static void ati_remote_close(struct input_dev *inputdev) static void ati_remote_irq_out(struct urb *urb, struct pt_regs *regs) { struct ati_remote *ati_remote = urb->context; - + if (urb->status) { dev_dbg(&ati_remote->interface->dev, "%s: status %d\n", __FUNCTION__, urb->status); return; } - + ati_remote->send_flags |= SEND_FLAG_COMPLETE; wmb(); wake_up(&ati_remote->wait); @@ -380,16 +368,16 @@ static void ati_remote_irq_out(struct urb *urb, struct pt_regs *regs) /* * ati_remote_sendpacket - * + * * Used to send device initialization strings */ static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data) { int retval = 0; - + /* Set up out_urb */ memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd)); - ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd); + ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd); ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1; ati_remote->out_urb->dev = ati_remote->udev; @@ -397,17 +385,17 @@ static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigne retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC); if (retval) { - dev_dbg(&ati_remote->interface->dev, + dev_dbg(&ati_remote->interface->dev, "sendpacket: usb_submit_urb failed: %d\n", retval); return retval; } wait_event_timeout(ati_remote->wait, ((ati_remote->out_urb->status != -EINPROGRESS) || - (ati_remote->send_flags & SEND_FLAG_COMPLETE)), + (ati_remote->send_flags & SEND_FLAG_COMPLETE)), HZ); usb_kill_urb(ati_remote->out_urb); - + return retval; } @@ -419,15 +407,15 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) int i; for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { - /* - * Decide if the table entry matches the remote input. + /* + * Decide if the table entry matches the remote input. */ if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) && - ((((ati_remote_tbl[i].data1 >> 4) - - (d1 >> 4) + rem) & 0x0f) == 0x0f) && + ((((ati_remote_tbl[i].data1 >> 4) - + (d1 >> 4) + rem) & 0x0f) == 0x0f) && (ati_remote_tbl[i].data2 == d2)) return i; - + } return -1; } @@ -435,16 +423,16 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) /* * ati_remote_report_input */ -static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) +static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) { struct ati_remote *ati_remote = urb->context; unsigned char *data= ati_remote->inbuf; - struct input_dev *dev = &ati_remote->idev; + struct input_dev *dev = &ati_remote->idev; int index, acc; int remote_num; - + /* Deal with strange looking inputs */ - if ( (urb->actual_length != 4) || (data[0] != 0x14) || + if ( (urb->actual_length != 4) || (data[0] != 0x14) || ((data[3] & 0x0f) != 0x00) ) { ati_remote_dump(data, urb->actual_length); return; @@ -453,7 +441,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) /* Mask unwanted remote channels. */ /* note: remote_num is 0-based, channel 1 on remote == 0 here */ remote_num = (data[3] >> 4) & 0x0f; - if (channel_mask & (1 << (remote_num + 1))) { + if (channel_mask & (1 << (remote_num + 1))) { dbginfo(&ati_remote->interface->dev, "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n", remote_num, data[1], data[2], channel_mask); @@ -463,37 +451,36 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) /* Look up event code index in translation table */ index = ati_remote_event_lookup(remote_num, data[1], data[2]); if (index < 0) { - dev_warn(&ati_remote->interface->dev, - "Unknown input from channel 0x%02x: data %02x,%02x\n", + dev_warn(&ati_remote->interface->dev, + "Unknown input from channel 0x%02x: data %02x,%02x\n", remote_num, data[1], data[2]); return; - } - dbginfo(&ati_remote->interface->dev, + } + dbginfo(&ati_remote->interface->dev, "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n", remote_num, data[1], data[2], index, ati_remote_tbl[index].code); - + if (ati_remote_tbl[index].kind == KIND_LITERAL) { input_regs(dev, regs); input_event(dev, ati_remote_tbl[index].type, ati_remote_tbl[index].code, ati_remote_tbl[index].value); input_sync(dev); - + ati_remote->old_jiffies = jiffies; return; } - + if (ati_remote_tbl[index].kind == KIND_FILTERED) { /* Filter duplicate events which happen "too close" together. */ - if ((ati_remote->old_data[0] == data[1]) && - (ati_remote->old_data[1] == data[2]) && - ((ati_remote->old_jiffies + FILTER_TIME) > jiffies)) { + if ((ati_remote->old_data[0] == data[1]) && + (ati_remote->old_data[1] == data[2]) && + ((ati_remote->old_jiffies + FILTER_TIME) > jiffies)) { ati_remote->repeat_count++; - } - else { + } else { ati_remote->repeat_count = 0; } - + ati_remote->old_data[0] = data[1]; ati_remote->old_data[1] = data[2]; ati_remote->old_jiffies = jiffies; @@ -501,7 +488,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) if ((ati_remote->repeat_count > 0) && (ati_remote->repeat_count < 5)) return; - + input_regs(dev, regs); input_event(dev, ati_remote_tbl[index].type, @@ -511,13 +498,13 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) input_sync(dev); return; - } - - /* + } + + /* * Other event kinds are from the directional control pad, and have an * acceleration factor applied to them. Without this acceleration, the * control pad is mostly unusable. - * + * * If elapsed time since last event is > 1/4 second, user "stopped", * so reset acceleration. Otherwise, user is probably holding the control * pad down, so we increase acceleration, ramping up over two seconds to @@ -559,7 +546,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) input_report_rel(dev, REL_Y, acc); break; default: - dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", + dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", ati_remote_tbl[index].kind); } input_sync(dev); @@ -586,12 +573,12 @@ static void ati_remote_irq_in(struct urb *urb, struct pt_regs *regs) case -ESHUTDOWN: dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n", __FUNCTION__); - return; + return; default: /* error */ - dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n", + dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n", __FUNCTION__, urb->status); } - + retval = usb_submit_urb(urb, SLAB_ATOMIC); if (retval) dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n", @@ -603,8 +590,6 @@ static void ati_remote_irq_in(struct urb *urb, struct pt_regs *regs) */ static void ati_remote_delete(struct ati_remote *ati_remote) { - if (!ati_remote) return; - if (ati_remote->irq_urb) usb_kill_urb(ati_remote->irq_urb); @@ -614,16 +599,16 @@ static void ati_remote_delete(struct ati_remote *ati_remote) input_unregister_device(&ati_remote->idev); if (ati_remote->inbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, ati_remote->inbuf, ati_remote->inbuf_dma); - + if (ati_remote->outbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, ati_remote->outbuf, ati_remote->outbuf_dma); - + if (ati_remote->irq_urb) usb_free_urb(ati_remote->irq_urb); - + if (ati_remote->out_urb) usb_free_urb(ati_remote->out_urb); @@ -636,21 +621,21 @@ static void ati_remote_input_init(struct ati_remote *ati_remote) int i; idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) | + idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_SIDE) | BIT(BTN_EXTRA) ); idev->relbit[0] = BIT(REL_X) | BIT(REL_Y); for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) if (ati_remote_tbl[i].type == EV_KEY) set_bit(ati_remote_tbl[i].code, idev->keybit); - + idev->private = ati_remote; idev->open = ati_remote_open; idev->close = ati_remote_close; - + idev->name = ati_remote->name; idev->phys = ati_remote->phys; - - idev->id.bustype = BUS_USB; + + idev->id.bustype = BUS_USB; idev->id.vendor = le16_to_cpu(ati_remote->udev->descriptor.idVendor); idev->id.product = le16_to_cpu(ati_remote->udev->descriptor.idProduct); idev->id.version = le16_to_cpu(ati_remote->udev->descriptor.bcdDevice); @@ -660,27 +645,27 @@ static int ati_remote_initialize(struct ati_remote *ati_remote) { struct usb_device *udev = ati_remote->udev; int pipe, maxp; - + init_waitqueue_head(&ati_remote->wait); /* Set up irq_urb */ pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress); maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; - - usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf, - maxp, ati_remote_irq_in, ati_remote, + + usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf, + maxp, ati_remote_irq_in, ati_remote, ati_remote->endpoint_in->bInterval); ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma; ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - + /* Set up out_urb */ pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress); maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; - usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf, - maxp, ati_remote_irq_out, ati_remote, + usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf, + maxp, ati_remote_irq_out, ati_remote, ati_remote->endpoint_out->bInterval); ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma; ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; @@ -688,11 +673,11 @@ static int ati_remote_initialize(struct ati_remote *ati_remote) /* send initialization strings */ if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) || (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { - dev_err(&ati_remote->interface->dev, + dev_err(&ati_remote->interface->dev, "Initializing ati_remote hardware failed.\n"); return 1; } - + return 0; } @@ -769,7 +754,7 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de if (!strlen(ati_remote->name)) sprintf(ati_remote->name, DRIVER_DESC "(%04x,%04x)", - le16_to_cpu(ati_remote->udev->descriptor.idVendor), + le16_to_cpu(ati_remote->udev->descriptor.idVendor), le16_to_cpu(ati_remote->udev->descriptor.idProduct)); /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ @@ -781,11 +766,11 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de ati_remote_input_init(ati_remote); input_register_device(&ati_remote->idev); - dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n", + dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n", ati_remote->name, path); usb_set_intfdata(interface, ati_remote); - + error: if (retval) ati_remote_delete(ati_remote); @@ -800,18 +785,14 @@ static void ati_remote_disconnect(struct usb_interface *interface) { struct ati_remote *ati_remote; - down(&disconnect_sem); - ati_remote = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); if (!ati_remote) { warn("%s - null device?\n", __FUNCTION__); return; } - - ati_remote_delete(ati_remote); - up(&disconnect_sem); + ati_remote_delete(ati_remote); } /* @@ -820,7 +801,7 @@ static void ati_remote_disconnect(struct usb_interface *interface) static int __init ati_remote_init(void) { int result; - + result = usb_register(&ati_remote_driver); if (result) err("usb_register error #%d\n", result); @@ -838,8 +819,8 @@ static void __exit ati_remote_exit(void) usb_deregister(&ati_remote_driver); } -/* - * module specification +/* + * module specification */ module_init(ati_remote_init); |