diff options
Diffstat (limited to 'drivers/usb/host/uhci-hub.c')
| -rw-r--r-- | drivers/usb/host/uhci-hub.c | 41 |
1 files changed, 20 insertions, 21 deletions
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 6d59c0f77f25..045cde4cbc3d 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -44,7 +44,7 @@ static int any_ports_active(struct uhci_hcd *uhci) int port; for (port = 0; port < uhci->rh_numports; ++port) { - if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & + if ((uhci_readw(uhci, USBPORTSC1 + port * 2) & (USBPORTSC_CCS | RWC_BITS)) || test_bit(port, &uhci->port_c_suspend)) return 1; @@ -68,7 +68,7 @@ static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf) *buf = 0; for (port = 0; port < uhci->rh_numports; ++port) { - if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & mask) || + if ((uhci_readw(uhci, USBPORTSC1 + port * 2) & mask) || test_bit(port, &uhci->port_c_suspend)) *buf |= (1 << (port + 1)); } @@ -78,17 +78,17 @@ static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf) #define OK(x) len = (x); break #define CLR_RH_PORTSTAT(x) \ - status = inw(port_addr); \ + status = uhci_readw(uhci, port_addr); \ status &= ~(RWC_BITS|WZ_BITS); \ status &= ~(x); \ status |= RWC_BITS & (x); \ - outw(status, port_addr) + uhci_writew(uhci, status, port_addr) #define SET_RH_PORTSTAT(x) \ - status = inw(port_addr); \ + status = uhci_readw(uhci, port_addr); \ status |= (x); \ status &= ~(RWC_BITS|WZ_BITS); \ - outw(status, port_addr) + uhci_writew(uhci, status, port_addr) /* UHCI controllers don't automatically stop resume signalling after 20 msec, * so we have to poll and check timeouts in order to take care of it. @@ -99,7 +99,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, int status; int i; - if (inw(port_addr) & SUSPEND_BITS) { + if (uhci_readw(uhci, port_addr) & SUSPEND_BITS) { CLR_RH_PORTSTAT(SUSPEND_BITS); if (test_bit(port, &uhci->resuming_ports)) set_bit(port, &uhci->port_c_suspend); @@ -110,7 +110,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, * Experiments show that some controllers take longer, so * we'll poll for completion. */ for (i = 0; i < 10; ++i) { - if (!(inw(port_addr) & SUSPEND_BITS)) + if (!(uhci_readw(uhci, port_addr) & SUSPEND_BITS)) break; udelay(1); } @@ -121,12 +121,12 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, /* Wait for the UHCI controller in HP's iLO2 server management chip. * It can take up to 250 us to finish a reset and set the CSC bit. */ -static void wait_for_HP(unsigned long port_addr) +static void wait_for_HP(struct uhci_hcd *uhci, unsigned long port_addr) { int i; for (i = 10; i < 250; i += 10) { - if (inw(port_addr) & USBPORTSC_CSC) + if (uhci_readw(uhci, port_addr) & USBPORTSC_CSC) return; udelay(10); } @@ -140,8 +140,8 @@ static void uhci_check_ports(struct uhci_hcd *uhci) int status; for (port = 0; port < uhci->rh_numports; ++port) { - port_addr = uhci->io_addr + USBPORTSC1 + 2 * port; - status = inw(port_addr); + port_addr = USBPORTSC1 + 2 * port; + status = uhci_readw(uhci, port_addr); if (unlikely(status & USBPORTSC_PR)) { if (time_after_eq(jiffies, uhci->ports_timeout)) { CLR_RH_PORTSTAT(USBPORTSC_PR); @@ -149,9 +149,8 @@ static void uhci_check_ports(struct uhci_hcd *uhci) /* HP's server management chip requires * a longer delay. */ - if (to_pci_dev(uhci_dev(uhci))->vendor == - PCI_VENDOR_ID_HP) - wait_for_HP(port_addr); + if (uhci->wait_for_hp) + wait_for_HP(uhci, port_addr); /* If the port was enabled before, turning * reset on caused a port enable change. @@ -242,7 +241,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, struct uhci_hcd *uhci = hcd_to_uhci(hcd); int status, lstatus, retval = 0, len = 0; unsigned int port = wIndex - 1; - unsigned long port_addr = uhci->io_addr + USBPORTSC1 + 2 * port; + unsigned long port_addr = USBPORTSC1 + 2 * port; u16 wPortChange, wPortStatus; unsigned long flags; @@ -260,14 +259,13 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto err; uhci_check_ports(uhci); - status = inw(port_addr); + status = uhci_readw(uhci, port_addr); /* Intel controllers report the OverCurrent bit active on. * VIA controllers report it active off, so we'll adjust the * bit value. (It's not standardized in the UHCI spec.) */ - if (to_pci_dev(hcd->self.controller)->vendor == - PCI_VENDOR_ID_VIA) + if (uhci->oc_low) status ^= USBPORTSC_OC; /* UHCI doesn't support C_RESET (always false) */ @@ -358,7 +356,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, CLR_RH_PORTSTAT(USBPORTSC_PEC); OK(0); case USB_PORT_FEAT_SUSPEND: - if (!(inw(port_addr) & USBPORTSC_SUSP)) { + if (!(uhci_readw(uhci, port_addr) & USBPORTSC_SUSP)) { /* Make certain the port isn't suspended */ uhci_finish_suspend(uhci, port, port_addr); @@ -370,7 +368,8 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * if the port is disabled. When this happens * just skip the Resume signalling. */ - if (!(inw(port_addr) & USBPORTSC_RD)) + if (!(uhci_readw(uhci, port_addr) & + USBPORTSC_RD)) uhci_finish_suspend(uhci, port, port_addr); else |