diff options
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 13 | ||||
-rw-r--r-- | drivers/tty/serial/msm_serial.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/omap-serial.c | 9 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.c | 15 |
4 files changed, 29 insertions, 9 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 6057a8a2d57d..83a145f61f1f 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -2972,6 +2972,8 @@ enum pci_board_num_t { pbn_b0_4_1152000_200, pbn_b0_8_1152000_200, + pbn_b0_4_1250000, + pbn_b0_2_1843200, pbn_b0_4_1843200, @@ -3207,6 +3209,13 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 0x200, }, + [pbn_b0_4_1250000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1250000, + .uart_offset = 8, + }, + [pbn_b0_2_1843200] = { .flags = FL_BASE0, .num_ports = 2, @@ -5895,6 +5904,10 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 }, { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 }, + /* MKS Tenta SCOM-080x serial cards */ + { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 }, + { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index b73889c8ed4b..fa799a287a9f 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -1097,6 +1097,7 @@ static const struct of_device_id msm_match_table[] = { { .compatible = "qcom,msm-uartdm" }, {} }; +MODULE_DEVICE_TABLE(of, msm_match_table); static struct platform_driver msm_platform_driver = { .remove = msm_serial_remove, diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 0a88693cd8ca..6b07b1040dbb 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1737,7 +1737,8 @@ static int serial_omap_probe(struct platform_device *pdev) return 0; err_add_port: - pm_runtime_put(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_qos_remove_request(&up->pm_qos_request); device_init_wakeup(up->dev, false); @@ -1750,9 +1751,13 @@ static int serial_omap_remove(struct platform_device *dev) { struct uart_omap_port *up = platform_get_drvdata(dev); + pm_runtime_get_sync(up->dev); + + uart_remove_one_port(&serial_omap_reg, &up->port); + + pm_runtime_dont_use_autosuspend(up->dev); pm_runtime_put_sync(up->dev); pm_runtime_disable(up->dev); - uart_remove_one_port(&serial_omap_reg, &up->port); pm_qos_remove_request(&up->pm_qos_request); device_init_wakeup(&dev->dev, false); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 10f83076826d..5407ab7fdd5a 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -925,14 +925,13 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) return -ENOMEM; } - dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf, + dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf, dma->rx_size, DMA_FROM_DEVICE); spin_lock_irqsave(&p->port.lock, flags); /* TX buffer */ - dma->tx_addr = dma_map_single(dma->tx_chan->device->dev, - p->port.state->xmit.buf, + dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf, UART_XMIT_SIZE, DMA_TO_DEVICE); spin_unlock_irqrestore(&p->port.lock, flags); @@ -946,7 +945,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) if (dma->rx_chan) { dmaengine_terminate_all(dma->rx_chan); - dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr, + dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size, DMA_FROM_DEVICE); kfree(dma->rx_buf); dma_release_channel(dma->rx_chan); @@ -955,7 +954,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) if (dma->tx_chan) { dmaengine_terminate_all(dma->tx_chan); - dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr, + dma_unmap_single(p->port.dev, dma->tx_addr, UART_XMIT_SIZE, DMA_TO_DEVICE); dma_release_channel(dma->tx_chan); dma->tx_chan = NULL; @@ -1055,8 +1054,10 @@ static int s3c64xx_serial_startup(struct uart_port *port) if (ourport->dma) { ret = s3c24xx_serial_request_dma(ourport); if (ret < 0) { - dev_warn(port->dev, "DMA request failed\n"); - return ret; + dev_warn(port->dev, + "DMA request failed, DMA will not be used\n"); + devm_kfree(port->dev, ourport->dma); + ourport->dma = NULL; } } |