diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 44 |
1 files changed, 21 insertions, 23 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 7ddac956ffb5..dc7d671b903c 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1364,9 +1364,6 @@ out: * Checks to see of the link status of the hardware has changed. If a * change in link status has been detected, then we read the PHY registers * to get the current speed/duplex if link exists. - * - * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link - * up). **/ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) { @@ -1382,7 +1379,8 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * Change or Rx Sequence Error interrupt. */ if (!mac->get_link_status) - return 1; + return 0; + mac->get_link_status = false; /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -1390,12 +1388,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) */ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); if (ret_val) - return ret_val; + goto out; if (hw->mac.type == e1000_pchlan) { ret_val = e1000_k1_gig_workaround_hv(hw, link); if (ret_val) - return ret_val; + goto out; } /* When connected at 10Mbps half-duplex, some parts are excessively @@ -1430,7 +1428,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire(hw); if (ret_val) - return ret_val; + goto out; if (hw->mac.type == e1000_pch2lan) emi_addr = I82579_RX_CONFIG; @@ -1453,7 +1451,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) hw->phy.ops.release(hw); if (ret_val) - return ret_val; + goto out; if (hw->mac.type == e1000_pch_spt) { u16 data; @@ -1462,14 +1460,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (speed == SPEED_1000) { ret_val = hw->phy.ops.acquire(hw); if (ret_val) - return ret_val; + goto out; ret_val = e1e_rphy_locked(hw, PHY_REG(776, 20), &data); if (ret_val) { hw->phy.ops.release(hw); - return ret_val; + goto out; } ptr_gap = (data & (0x3FF << 2)) >> 2; @@ -1483,18 +1481,18 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) } hw->phy.ops.release(hw); if (ret_val) - return ret_val; + goto out; } else { ret_val = hw->phy.ops.acquire(hw); if (ret_val) - return ret_val; + goto out; ret_val = e1e_wphy_locked(hw, PHY_REG(776, 20), 0xC023); hw->phy.ops.release(hw); if (ret_val) - return ret_val; + goto out; } } @@ -1521,7 +1519,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) { ret_val = e1000_k1_workaround_lpt_lp(hw, link); if (ret_val) - return ret_val; + goto out; } if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) { @@ -1530,7 +1528,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) */ ret_val = e1000_platform_pm_pch_lpt(hw, link); if (ret_val) - return ret_val; + goto out; } /* Clear link partner's EEE ability */ @@ -1550,9 +1548,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) } if (!link) - return 0; /* No link detected */ - - mac->get_link_status = false; + goto out; switch (hw->mac.type) { case e1000_pch2lan: @@ -1600,7 +1596,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * we have already determined whether we have link or not. */ if (!mac->autoneg) - return 1; + return -E1000_ERR_CONFIG; /* Auto-Neg is enabled. Auto Speed Detection takes care * of MAC speed/duplex configuration. So we only need to @@ -1614,12 +1610,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * different link partner. */ ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) { + if (ret_val) e_dbg("Error configuring flow control\n"); - return ret_val; - } - return 1; + return ret_val; + +out: + mac->get_link_status = true; + return ret_val; } static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) |