diff options
Diffstat (limited to 'drivers/message/fusion/mptspi.c')
| -rw-r--r-- | drivers/message/fusion/mptspi.c | 527 |
1 files changed, 462 insertions, 65 deletions
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 203c661d2c79..c31a9e3c8a26 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -4,7 +4,7 @@ * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * * Copyright (c) 1999-2007 LSI Logic Corporation - * (mailto:mpt_linux_developer@lsil.com) + * (mailto:mpt_linux_developer@lsi.com) * */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -65,6 +65,7 @@ #include <scsi/scsi_tcq.h> #include <scsi/scsi_transport.h> #include <scsi/scsi_transport_spi.h> +#include <scsi/scsi_dbg.h> #include "mptbase.h" #include "mptscsih.h" @@ -95,25 +96,339 @@ static int mptspiDoneCtx = -1; static int mptspiTaskCtx = -1; static int mptspiInternalCtx = -1; /* Used only for internal commands */ +/** + * mptspi_setTargetNegoParms - Update the target negotiation + * parameters based on the the Inquiry data, adapter capabilities, + * and NVRAM settings + * + * @hd: Pointer to a SCSI Host Structure + * @vtarget: per target private data + * @sdev: SCSI device + * + **/ +static void +mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, + struct scsi_device *sdev) +{ + SpiCfgData *pspi_data = &hd->ioc->spi_data; + int id = (int) target->id; + int nvram; + u8 width = MPT_NARROW; + u8 factor = MPT_ASYNC; + u8 offset = 0; + u8 nfactor; + u8 noQas = 1; + + target->negoFlags = pspi_data->noQas; + + if (sdev->scsi_level < SCSI_2) { + width = 0; + factor = MPT_ULTRA2; + offset = pspi_data->maxSyncOffset; + target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; + } else { + if (scsi_device_wide(sdev)) + width = 1; + + if (scsi_device_sync(sdev)) { + factor = pspi_data->minSyncFactor; + if (!scsi_device_dt(sdev)) + factor = MPT_ULTRA2; + else { + if (!scsi_device_ius(sdev) && + !scsi_device_qas(sdev)) + factor = MPT_ULTRA160; + else { + factor = MPT_ULTRA320; + if (scsi_device_qas(sdev)) { + ddvprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id)); + noQas = 0; + } + if (sdev->type == TYPE_TAPE && + scsi_device_ius(sdev)) + target->negoFlags |= MPT_TAPE_NEGO_IDP; + } + } + offset = pspi_data->maxSyncOffset; + + /* If RAID, never disable QAS + * else if non RAID, do not disable + * QAS if bit 1 is set + * bit 1 QAS support, non-raid only + * bit 0 IU support + */ + if (target->raidVolume == 1) + noQas = 0; + } else { + factor = MPT_ASYNC; + offset = 0; + } + } + + if (!sdev->tagged_supported) + target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; + + /* Update tflags based on NVRAM settings. (SCSI only) + */ + if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) { + nvram = pspi_data->nvram[id]; + nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; + + if (width) + width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; + + if (offset > 0) { + /* Ensure factor is set to the + * maximum of: adapter, nvram, inquiry + */ + if (nfactor) { + if (nfactor < pspi_data->minSyncFactor ) + nfactor = pspi_data->minSyncFactor; + + factor = max(factor, nfactor); + if (factor == MPT_ASYNC) + offset = 0; + } else { + offset = 0; + factor = MPT_ASYNC; + } + } else { + factor = MPT_ASYNC; + } + } + + /* Make sure data is consistent + */ + if ((!width) && (factor < MPT_ULTRA2)) + factor = MPT_ULTRA2; + + /* Save the data to the target structure. + */ + target->minSyncFactor = factor; + target->maxOffset = offset; + target->maxWidth = width; + + target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; + + /* Disable unused features. + */ + if (!width) + target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE; + + if (!offset) + target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC; + + if ( factor > MPT_ULTRA320 ) + noQas = 0; + + if (noQas && (pspi_data->noQas == 0)) { + pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS; + target->negoFlags |= MPT_TARGET_NO_NEGO_QAS; + + /* Disable QAS in a mixed configuration case + */ + + ddvprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id)); + } +} + +/** + * mptspi_writeIOCPage4 - write IOC Page 4 + * @hd: Pointer to a SCSI Host Structure + * @channel: + * @id: write IOC Page4 for this ID & Bus + * + * Return: -EAGAIN if unable to obtain a Message Frame + * or 0 if success. + * + * Remark: We do not wait for a return, write pages sequentially. + **/ +static int +mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id) +{ + MPT_ADAPTER *ioc = hd->ioc; + Config_t *pReq; + IOCPage4_t *IOCPage4Ptr; + MPT_FRAME_HDR *mf; + dma_addr_t dataDma; + u16 req_idx; + u32 frameOffset; + u32 flagsLength; + int ii; + + /* Get a MF for this command. + */ + if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { + dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n", + ioc->name)); + return -EAGAIN; + } + + /* Set the request and the data pointers. + * Place data at end of MF. + */ + pReq = (Config_t *)mf; + + req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + frameOffset = ioc->req_sz - sizeof(IOCPage4_t); + + /* Complete the request frame (same for all requests). + */ + pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + pReq->Reserved = 0; + pReq->ChainOffset = 0; + pReq->Function = MPI_FUNCTION_CONFIG; + pReq->ExtPageLength = 0; + pReq->ExtPageType = 0; + pReq->MsgFlags = 0; + for (ii=0; ii < 8; ii++) { + pReq->Reserved2[ii] = 0; + } + + IOCPage4Ptr = ioc->spi_data.pIocPg4; + dataDma = ioc->spi_data.IocPg4_dma; + ii = IOCPage4Ptr->ActiveSEP++; + IOCPage4Ptr->SEP[ii].SEPTargetID = id; + IOCPage4Ptr->SEP[ii].SEPBus = channel; + pReq->Header = IOCPage4Ptr->Header; + pReq->PageAddress = cpu_to_le32(id | (channel << 8 )); + + /* Add a SGE to the config request. + */ + flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | + (IOCPage4Ptr->Header.PageLength + ii) * 4; + + mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); + + ddvprintk((MYIOC_s_INFO_FMT + "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n", + ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel)); + + mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); + + return 0; +} + +/** + * mptspi_initTarget - Target, LUN alloc/free functionality. + * @hd: Pointer to MPT_SCSI_HOST structure + * @vtarget: per target private data + * @sdev: SCSI device + * + * NOTE: It's only SAFE to call this routine if data points to + * sane & valid STANDARD INQUIRY data! + * + * Allocate and initialize memory for this target. + * Save inquiry data. + * + **/ +static void +mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, + struct scsi_device *sdev) +{ + + /* Is LUN supported? If so, upper 2 bits will be 0 + * in first byte of inquiry data. + */ + if (sdev->inq_periph_qual != 0) + return; + + if (vtarget == NULL) + return; + + vtarget->type = sdev->type; + + if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { + /* Treat all Processors as SAF-TE if + * command line option is set */ + vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); + }else if ((sdev->type == TYPE_PROCESSOR) && + !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { + if (sdev->inquiry_len > 49 ) { + if (sdev->inquiry[44] == 'S' && + sdev->inquiry[45] == 'A' && + sdev->inquiry[46] == 'F' && + sdev->inquiry[47] == '-' && + sdev->inquiry[48] == 'T' && + sdev->inquiry[49] == 'E' ) { + vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); + } + } + } + mptspi_setTargetNegoParms(hd, vtarget, sdev); +} + +/** + * mptspi_is_raid - Determines whether target is belonging to volume + * @hd: Pointer to a SCSI HOST structure + * @id: target device id + * + * Return: + * non-zero = true + * zero = false + * + */ +static int +mptspi_is_raid(struct _MPT_SCSI_HOST *hd, u32 id) +{ + int i, rc = 0; + + if (!hd->ioc->raid_data.pIocPg2) + goto out; + + if (!hd->ioc->raid_data.pIocPg2->NumActiveVolumes) + goto out; + for (i=0; i < hd->ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { + if (hd->ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) { + rc = 1; + goto out; + } + } + + out: + return rc; +} + static int mptspi_target_alloc(struct scsi_target *starget) { struct Scsi_Host *shost = dev_to_shost(&starget->dev); struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata; - int ret; + VirtTarget *vtarget; if (hd == NULL) return -ENODEV; - ret = mptscsih_target_alloc(starget); - if (ret) - return ret; + vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); + if (!vtarget) + return -ENOMEM; + + vtarget->ioc_id = hd->ioc->id; + vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; + vtarget->id = (u8)starget->id; + vtarget->channel = (u8)starget->channel; + vtarget->starget = starget; + starget->hostdata = vtarget; + + if (starget->channel == 1) { + if (mptscsih_is_phys_disk(hd->ioc, 0, starget->id) == 0) + return 0; + vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; + /* The real channel for this device is zero */ + vtarget->channel = 0; + /* The actual physdisknum (for RAID passthrough) */ + vtarget->id = mptscsih_raid_id_to_num(hd->ioc, 0, + starget->id); + } - /* if we're a device on virtual channel 1 and we're not part - * of an array, just return here (otherwise the setup below - * may actually affect a real physical device on channel 0 */ - if (starget->channel == 1 && - mptscsih_raid_id_to_num(hd, starget->id) < 0) - return 0; + if (starget->channel == 0 && + mptspi_is_raid(hd, starget->id)) { + vtarget->raidVolume = 1; + ddvprintk((KERN_INFO + "RAID Volume @ channel=%d id=%d\n", starget->channel, + starget->id)); + } if (hd->ioc->spi_data.nvram && hd->ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) { @@ -132,6 +447,64 @@ static int mptspi_target_alloc(struct scsi_target *starget) return 0; } +void +mptspi_target_destroy(struct scsi_target *starget) +{ + if (starget->hostdata) + kfree(starget->hostdata); + starget->hostdata = NULL; +} + +/** + * mptspi_print_write_nego - negotiation parameters debug info that is being sent + * @hd: Pointer to a SCSI HOST structure + * @starget: SCSI target + * @ii: negotiation parameters + * + */ +static void +mptspi_print_write_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii) +{ + ddvprintk((MYIOC_s_INFO_FMT "id=%d Requested = 0x%08x" + " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n", + hd->ioc->name, starget->id, ii, + ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "", + ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF), + ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "", + ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "", + ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "", + ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "", + ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "", + ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "", + ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "", + ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": "")); +} + +/** + * mptspi_print_read_nego - negotiation parameters debug info that is being read + * @hd: Pointer to a SCSI HOST structure + * @starget: SCSI target + * @ii: negotiation parameters + * + */ +static void +mptspi_print_read_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii) +{ + ddvprintk((MYIOC_s_INFO_FMT "id=%d Read = 0x%08x" + " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n", + hd->ioc->name, starget->id, ii, + ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "", + ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF), + ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "", + ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "", + ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "", + ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "", + ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "", + ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "", + ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "", + ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": "")); +} + static int mptspi_read_spi_device_pg0(struct scsi_target *starget, struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0) { @@ -147,7 +520,7 @@ static int mptspi_read_spi_device_pg0(struct scsi_target *starget, /* No SPI parameters for RAID devices */ if (starget->channel == 0 && - (hd->ioc->raid_data.isRaid & (1 << starget->id))) + mptspi_is_raid(hd, starget->id)) return -1; size = ioc->spi_data.sdp0length * 4; @@ -185,6 +558,8 @@ static int mptspi_read_spi_device_pg0(struct scsi_target *starget, err = 0; memcpy(pass_pg0, pg0, size); + mptspi_print_read_nego(hd, starget, le32_to_cpu(pg0->NegotiatedParameters)); + out_free: dma_free_coherent(&ioc->pcidev->dev, size, pg0, pg0_dma); return err; @@ -233,7 +608,7 @@ static void mptspi_read_parameters(struct scsi_target *starget) } static int -mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, int disk) +mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id) { MpiRaidActionRequest_t *pReq; MPT_FRAME_HDR *mf; @@ -253,8 +628,8 @@ mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, int disk) pReq->Reserved1 = 0; pReq->ChainOffset = 0; pReq->Function = MPI_FUNCTION_RAID_ACTION; - pReq->VolumeID = disk; - pReq->VolumeBus = 0; + pReq->VolumeID = id; + pReq->VolumeBus = channel; pReq->PhysDiskNum = 0; pReq->MsgFlags = 0; pReq->Reserved2 = 0; @@ -263,8 +638,8 @@ mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, int disk) mpt_add_sge((char *)&pReq->ActionDataSGE, MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1); - ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action %x id %d\n", - hd->ioc->name, action, io->id)); + ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action=%x channel=%d id=%d\n", + hd->ioc->name, pReq->Action, channel, id)); hd->pLocal = NULL; hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */ @@ -292,12 +667,12 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd, /* no DV on RAID devices */ if (sdev->channel == 0 && - (hd->ioc->raid_data.isRaid & (1 << sdev->id))) + mptspi_is_raid(hd, sdev->id)) return; /* If this is a piece of a RAID, then quiesce first */ if (sdev->channel == 1 && - mptscsih_quiesce_raid(hd, 1, vtarget->target_id) < 0) { + mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) { starget_printk(KERN_ERR, scsi_target(sdev), "Integrated RAID quiesce failed\n"); return; @@ -306,7 +681,7 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd, spi_dv_device(sdev); if (sdev->channel == 1 && - mptscsih_quiesce_raid(hd, 0, vtarget->target_id) < 0) + mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0) starget_printk(KERN_ERR, scsi_target(sdev), "Integrated RAID resume failed\n"); @@ -317,54 +692,89 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd, static int mptspi_slave_alloc(struct scsi_device *sdev) { - int ret; MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata; - /* gcc doesn't see that all uses of this variable occur within - * the if() statements, so stop it from whining */ - int physdisknum = 0; - - if (sdev->channel == 1) { - physdisknum = mptscsih_raid_id_to_num(hd, sdev->id); + VirtTarget *vtarget; + VirtDevice *vdev; + struct scsi_target *starget; - if (physdisknum < 0) - return physdisknum; + if (sdev->channel == 1 && + mptscsih_is_phys_disk(hd->ioc, 0, sdev->id) == 0) + return -ENXIO; + + vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL); + if (!vdev) { + printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", + hd->ioc->name, sizeof(VirtDevice)); + return -ENOMEM; } - ret = mptscsih_slave_alloc(sdev); + vdev->lun = sdev->lun; + sdev->hostdata = vdev; - if (ret) - return ret; + starget = scsi_target(sdev); + vtarget = starget->hostdata; + vdev->vtarget = vtarget; + vtarget->num_luns++; - if (sdev->channel == 1) { - VirtDevice *vdev = sdev->hostdata; + if (sdev->channel == 1) sdev->no_uld_attach = 1; - vdev->vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; - /* The real channel for this device is zero */ - vdev->vtarget->bus_id = 0; - /* The actual physdisknum (for RAID passthrough) */ - vdev->vtarget->target_id = physdisknum; - } return 0; } static int mptspi_slave_configure(struct scsi_device *sdev) { - int ret = mptscsih_slave_configure(sdev); struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)sdev->host->hostdata; + VirtTarget *vtarget = scsi_target(sdev)->hostdata; + int ret = mptscsih_slave_configure(sdev); if (ret) return ret; + mptspi_initTarget(hd, vtarget, sdev); + + ddvprintk((MYIOC_s_INFO_FMT "id=%d min_period=0x%02x" + " max_offset=0x%02x max_width=%d\n", hd->ioc->name, + sdev->id, spi_min_period(scsi_target(sdev)), + spi_max_offset(scsi_target(sdev)), + spi_max_width(scsi_target(sdev)))); + if ((sdev->channel == 1 || - !(hd->ioc->raid_data.isRaid & (1 << sdev->id))) && + !(mptspi_is_raid(hd, sdev->id))) && !spi_initial_dv(sdev->sdev_target)) mptspi_dv_device(hd, sdev); return 0; } +static int +mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) +{ + struct _MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata; + VirtDevice *vdev = SCpnt->device->hostdata; + + if (!vdev || !vdev->vtarget) { + SCpnt->result = DID_NO_CONNECT << 16; + done(SCpnt); + return 0; + } + + if (SCpnt->device->channel == 1 && + mptscsih_is_phys_disk(hd->ioc, 0, SCpnt->device->id) == 0) { + SCpnt->result = DID_NO_CONNECT << 16; + done(SCpnt); + return 0; + } + +#ifdef MPT_DEBUG_DV + if (spi_dv_pending(scsi_target(SCpnt->device))) + scsi_print_command(SCpnt); +#endif + + return mptscsih_qcmd(SCpnt,done); +} + static void mptspi_slave_destroy(struct scsi_device *sdev) { struct scsi_target *starget = scsi_target(sdev); @@ -392,11 +802,11 @@ static struct scsi_host_template mptspi_driver_template = { .proc_info = mptscsih_proc_info, .name = "MPT SPI Host", .info = mptscsih_info, - .queuecommand = mptscsih_qcmd, + .queuecommand = mptspi_qcmd, .target_alloc = mptspi_target_alloc, .slave_alloc = mptspi_slave_alloc, .slave_configure = mptspi_slave_configure, - .target_destroy = mptscsih_target_destroy, + .target_destroy = mptspi_target_destroy, .slave_destroy = mptspi_slave_destroy, .change_queue_depth = mptscsih_change_queue_depth, .eh_abort_handler = mptscsih_abort, @@ -427,7 +837,7 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget, /* don't allow updating nego parameters on RAID devices */ if (starget->channel == 0 && - (hd->ioc->raid_data.isRaid & (1 << starget->id))) + mptspi_is_raid(hd, starget->id)) return -1; size = ioc->spi_data.sdp1length * 4; @@ -460,6 +870,8 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget, pg1->Header.PageNumber = hdr.PageNumber; pg1->Header.PageType = hdr.PageType; + mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters)); + if (mpt_config(ioc, &cfg)) { starget_printk(KERN_ERR, starget, "mpt_config failed\n"); goto out_free; @@ -672,9 +1084,9 @@ static void mpt_work_wrapper(struct work_struct *work) if (sdev->channel != 1) continue; - /* The target_id is the raid PhysDiskNum, even if + /* The id is the raid PhysDiskNum, even if * starget->id is the actual target address */ - if(vtarget->target_id != disk) + if(vtarget->id != disk) continue; starget_printk(KERN_INFO, vtarget->starget, @@ -727,7 +1139,7 @@ mptspi_deny_binding(struct scsi_target *starget) { struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata; - return ((hd->ioc->raid_data.isRaid & (1 << starget->id)) && + return ((mptspi_is_raid(hd, starget->id)) && starget->channel == 0) ? 1 : 0; } @@ -945,14 +1357,13 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) * max_lun = 1 + actual last lun, * see hosts.h :o( */ - sh->max_id = MPT_MAX_SCSI_DEVICES; + sh->max_id = ioc->devices_per_bus; sh->max_lun = MPT_LAST_LUN + 1; /* * If RAID Firmware Detected, setup virtual channel */ - if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) - > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) + if (ioc->ir_firmware) sh->max_channel = 1; else sh->max_channel = 0; @@ -1009,20 +1420,6 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n", ioc->name, hd->ScsiLookup)); - /* Allocate memory for the device structures. - * A non-Null pointer at an offset - * indicates a device exists. - * max_id = 1 + maximum id (hosts.h) - */ - hd->Targets = kcalloc(sh->max_id * (sh->max_channel + 1), - sizeof(void *), GFP_ATOMIC); - if (!hd->Targets) { - error = -ENOMEM; - goto out_mptspi_probe; - } - - dprintk((KERN_INFO " vdev @ %p\n", hd->Targets)); - /* Clear the TM flags */ hd->tmPending = 0; |