diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 762 |
1 files changed, 405 insertions, 357 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5ec10e02341b..979228594599 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -29,6 +29,7 @@ #include <linux/i2c.h> #include <linux/kernel.h> #include <linux/slab.h> +#include <linux/vgaarb.h> #include "drmP.h" #include "intel_drv.h" #include "i915_drm.h" @@ -976,14 +977,84 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, return true; } -void -intel_wait_for_vblank(struct drm_device *dev) +/** + * intel_wait_for_vblank - wait for vblank on a given pipe + * @dev: drm device + * @pipe: pipe to wait for + * + * Wait for vblank to occur on a given pipe. Needed for various bits of + * mode setting code. + */ +void intel_wait_for_vblank(struct drm_device *dev, int pipe) { - /* Wait for 20ms, i.e. one cycle at 50hz. */ - if (in_dbg_master()) - mdelay(20); /* The kernel debugger cannot call msleep() */ - else - msleep(20); + struct drm_i915_private *dev_priv = dev->dev_private; + int pipestat_reg = (pipe == 0 ? PIPEASTAT : PIPEBSTAT); + + /* Clear existing vblank status. Note this will clear any other + * sticky status fields as well. + * + * This races with i915_driver_irq_handler() with the result + * that either function could miss a vblank event. Here it is not + * fatal, as we will either wait upon the next vblank interrupt or + * timeout. Generally speaking intel_wait_for_vblank() is only + * called during modeset at which time the GPU should be idle and + * should *not* be performing page flips and thus not waiting on + * vblanks... + * Currently, the result of us stealing a vblank from the irq + * handler is that a single frame will be skipped during swapbuffers. + */ + I915_WRITE(pipestat_reg, + I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS); + + /* Wait for vblank interrupt bit to set */ + if (wait_for((I915_READ(pipestat_reg) & + PIPE_VBLANK_INTERRUPT_STATUS), + 50, 0)) + DRM_DEBUG_KMS("vblank wait timed out\n"); +} + +/* + * intel_wait_for_pipe_off - wait for pipe to turn off + * @dev: drm device + * @pipe: pipe to wait for + * + * After disabling a pipe, we can't wait for vblank in the usual way, + * spinning on the vblank interrupt status bit, since we won't actually + * see an interrupt when the pipe is disabled. + * + * On Gen4 and above: + * wait for the pipe register state bit to turn off + * + * Otherwise: + * wait for the display line value to settle (it usually + * ends up stopping at the start of the next frame). + * + */ +static void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (INTEL_INFO(dev)->gen >= 4) { + int pipeconf_reg = (pipe == 0 ? PIPEACONF : PIPEBCONF); + + /* Wait for the Pipe State to go off */ + if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, + 100, 0)) + DRM_DEBUG_KMS("pipe_off wait timed out\n"); + } else { + u32 last_line; + int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL); + unsigned long timeout = jiffies + msecs_to_jiffies(100); + + /* Wait for the display line to settle */ + do { + last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK; + mdelay(5); + } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) && + time_after(timeout, jiffies)); + if (time_after(jiffies, timeout)) + DRM_DEBUG_KMS("pipe_off wait timed out\n"); + } } /* Parameters have changed, update FBC info */ @@ -1037,7 +1108,6 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) void i8xx_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long timeout = jiffies + msecs_to_jiffies(1); u32 fbc_ctl; if (!I915_HAS_FBC(dev)) @@ -1052,16 +1122,11 @@ void i8xx_disable_fbc(struct drm_device *dev) I915_WRITE(FBC_CONTROL, fbc_ctl); /* Wait for compressing bit to clear */ - while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) { - if (time_after(jiffies, timeout)) { - DRM_DEBUG_DRIVER("FBC idle timed out\n"); - break; - } - ; /* do nothing */ + if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10, 0)) { + DRM_DEBUG_KMS("FBC idle timed out\n"); + return; } - intel_wait_for_vblank(dev); - DRM_DEBUG_KMS("disabled FBC\n"); } @@ -1118,7 +1183,6 @@ void g4x_disable_fbc(struct drm_device *dev) dpfc_ctl = I915_READ(DPFC_CONTROL); dpfc_ctl &= ~DPFC_CTL_EN; I915_WRITE(DPFC_CONTROL, dpfc_ctl); - intel_wait_for_vblank(dev); DRM_DEBUG_KMS("disabled FBC\n"); } @@ -1179,7 +1243,6 @@ void ironlake_disable_fbc(struct drm_device *dev) dpfc_ctl = I915_READ(ILK_DPFC_CONTROL); dpfc_ctl &= ~DPFC_CTL_EN; I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl); - intel_wait_for_vblank(dev); DRM_DEBUG_KMS("disabled FBC\n"); } @@ -1453,7 +1516,7 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, dspcntr &= ~DISPPLANE_TILED; } - if (IS_IRONLAKE(dev)) + if (HAS_PCH_SPLIT(dev)) /* must disable */ dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; @@ -1462,23 +1525,22 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, Start = obj_priv->gtt_offset; Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8); - DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); + DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", + Start, Offset, x, y, fb->pitch); I915_WRITE(dspstride, fb->pitch); if (IS_I965G(dev)) { - I915_WRITE(dspbase, Offset); - I915_READ(dspbase); I915_WRITE(dspsurf, Start); - I915_READ(dspsurf); I915_WRITE(dsptileoff, (y << 16) | x); + I915_WRITE(dspbase, Offset); } else { I915_WRITE(dspbase, Start + Offset); - I915_READ(dspbase); } + POSTING_READ(dspbase); - if ((IS_I965G(dev) || plane == 0)) + if (IS_I965G(dev) || plane == 0) intel_update_fbc(crtc, &crtc->mode); - intel_wait_for_vblank(dev); + intel_wait_for_vblank(dev, intel_crtc->pipe); intel_increase_pllclock(crtc, true); return 0; @@ -1489,7 +1551,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_framebuffer *intel_fb; @@ -1497,13 +1558,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_gem_object *obj; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - unsigned long Start, Offset; - int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR); - int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF); - int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE; - int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF); - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; - u32 dspcntr; int ret; /* no fb bound */ @@ -1539,73 +1593,18 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - dspcntr = I915_READ(dspcntr_reg); - /* Mask out pixel format bits in case we change it */ - dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; - switch (crtc->fb->bits_per_pixel) { - case 8: - dspcntr |= DISPPLANE_8BPP; - break; - case 16: - if (crtc->fb->depth == 15) - dspcntr |= DISPPLANE_15_16BPP; - else - dspcntr |= DISPPLANE_16BPP; - break; - case 24: - case 32: - if (crtc->fb->depth == 30) - dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA; - else - dspcntr |= DISPPLANE_32BPP_NO_ALPHA; - break; - default: - DRM_ERROR("Unknown color depth\n"); + ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y); + if (ret) { i915_gem_object_unpin(obj); mutex_unlock(&dev->struct_mutex); - return -EINVAL; - } - if (IS_I965G(dev)) { - if (obj_priv->tiling_mode != I915_TILING_NONE) - dspcntr |= DISPPLANE_TILED; - else - dspcntr &= ~DISPPLANE_TILED; - } - - if (HAS_PCH_SPLIT(dev)) - /* must disable */ - dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; - - I915_WRITE(dspcntr_reg, dspcntr); - - Start = obj_priv->gtt_offset; - Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); - - DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", - Start, Offset, x, y, crtc->fb->pitch); - I915_WRITE(dspstride, crtc->fb->pitch); - if (IS_I965G(dev)) { - I915_WRITE(dspbase, Offset); - I915_READ(dspbase); - I915_WRITE(dspsurf, Start); - I915_READ(dspsurf); - I915_WRITE(dsptileoff, (y << 16) | x); - } else { - I915_WRITE(dspbase, Start + Offset); - I915_READ(dspbase); + return ret; } - if ((IS_I965G(dev) || plane == 0)) - intel_update_fbc(crtc, &crtc->mode); - - intel_wait_for_vblank(dev); - if (old_fb) { intel_fb = to_intel_framebuffer(old_fb); obj_priv = to_intel_bo(intel_fb->obj); i915_gem_object_unpin(intel_fb->obj); } - intel_increase_pllclock(crtc, true); mutex_unlock(&dev->struct_mutex); @@ -1627,54 +1626,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return 0; } -/* Disable the VGA plane that we never use */ -static void i915_disable_vga (struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - u8 sr1; - u32 vga_reg; - - if (HAS_PCH_SPLIT(dev)) - vga_reg = CPU_VGACNTRL; - else - vga_reg = VGACNTRL; - - if (I915_READ(vga_reg) & VGA_DISP_DISABLE) - return; - - I915_WRITE8(VGA_SR_INDEX, 1); - sr1 = I915_READ8(VGA_SR_DATA); - I915_WRITE8(VGA_SR_DATA, sr1 | (1 << 5)); - udelay(100); - - I915_WRITE(vga_reg, VGA_DISP_DISABLE); -} - -static void ironlake_disable_pll_edp (struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - u32 dpa_ctl; - - DRM_DEBUG_KMS("\n"); - dpa_ctl = I915_READ(DP_A); - dpa_ctl &= ~DP_PLL_ENABLE; - I915_WRITE(DP_A, dpa_ctl); -} - -static void ironlake_enable_pll_edp (struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - u32 dpa_ctl; - - dpa_ctl = I915_READ(DP_A); - dpa_ctl |= DP_PLL_ENABLE; - I915_WRITE(DP_A, dpa_ctl); - udelay(200); -} - - static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock) { struct drm_device *dev = crtc->dev; @@ -1928,9 +1879,6 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF; - int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1; - int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ; - int pf_win_pos = (pipe == 0) ? PFA_WIN_POS : PFB_WIN_POS; int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; @@ -1945,7 +1893,6 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B; int trans_dpll_sel = (pipe == 0) ? 0 : 1; u32 temp; - int n; u32 pipe_bpc; temp = I915_READ(pipeconf_reg); @@ -1958,7 +1905,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: - DRM_DEBUG_KMS("crtc %d dpms on\n", pipe); + DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane); if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(PCH_LVDS); @@ -1968,10 +1915,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) } } - if (HAS_eDP) { - /* enable eDP PLL */ - ironlake_enable_pll_edp(crtc); - } else { + if (!HAS_eDP) { /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ temp = I915_READ(fdi_rx_reg); @@ -2003,17 +1947,19 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) } /* Enable panel fitting for LVDS */ - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) - || HAS_eDP || intel_pch_has_edp(crtc)) { - temp = I915_READ(pf_ctl_reg); - I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3); - - /* currently full aspect */ - I915_WRITE(pf_win_pos, 0); - - I915_WRITE(pf_win_size, - (dev_priv->panel_fixed_mode->hdisplay << 16) | - (dev_priv->panel_fixed_mode->vdisplay)); + if (dev_priv->pch_pf_size && + (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) + || HAS_eDP || intel_pch_has_edp(crtc))) { + /* Force use of hard-coded filter coefficients + * as some pre-programmed values are broken, + * e.g. x201. + */ + I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, + PF_ENABLE | PF_FILTER_MED_3x3); + I915_WRITE(pipe ? PFB_WIN_POS : PFA_WIN_POS, + dev_priv->pch_pf_pos); + I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, + dev_priv->pch_pf_size); } /* Enable CPU pipe */ @@ -2097,9 +2043,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) int reg; reg = I915_READ(trans_dp_ctl); - reg &= ~TRANS_DP_PORT_SEL_MASK; - reg = TRANS_DP_OUTPUT_ENABLE | - TRANS_DP_ENH_FRAMING; + reg &= ~(TRANS_DP_PORT_SEL_MASK | + TRANS_DP_SYNC_MASK); + reg |= (TRANS_DP_OUTPUT_ENABLE | + TRANS_DP_ENH_FRAMING); if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) reg |= TRANS_DP_HSYNC_ACTIVE_HIGH; @@ -2137,18 +2084,17 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) I915_WRITE(transconf_reg, temp | TRANS_ENABLE); I915_READ(transconf_reg); - while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0) - ; - + if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100, 1)) + DRM_ERROR("failed to enable transcoder\n"); } intel_crtc_load_lut(crtc); intel_update_fbc(crtc, &crtc->mode); + break; - break; case DRM_MODE_DPMS_OFF: - DRM_DEBUG_KMS("crtc %d dpms off\n", pipe); + DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane); drm_vblank_off(dev, pipe); /* Disable display plane */ @@ -2164,40 +2110,22 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); - i915_disable_vga(dev); - /* disable cpu pipe, disable after all planes disabled */ temp = I915_READ(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) != 0) { I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); - I915_READ(pipeconf_reg); - n = 0; + /* wait for cpu pipe off, pipe state */ - while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) { - n++; - if (n < 60) { - udelay(500); - continue; - } else { - DRM_DEBUG_KMS("pipe %d off delay\n", - pipe); - break; - } - } + if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50, 1)) + DRM_ERROR("failed to turn off cpu pipe\n"); } else DRM_DEBUG_KMS("crtc %d is disabled\n", pipe); udelay(100); /* Disable PF */ - temp = I915_READ(pf_ctl_reg); - if ((temp & PF_ENABLE) != 0) { - I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE); - I915_READ(pf_ctl_reg); - } - I915_WRITE(pf_win_size, 0); - POSTING_READ(pf_win_size); - + I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0); + I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0); /* disable CPU FDI tx and PCH FDI rx */ temp = I915_READ(fdi_tx_reg); @@ -2244,20 +2172,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) temp = I915_READ(transconf_reg); if ((temp & TRANS_ENABLE) != 0) { I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE); - I915_READ(transconf_reg); - n = 0; + /* wait for PCH transcoder off, transcoder state */ - while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) { - n++; - if (n < 60) { - udelay(500); - continue; - } else { - DRM_DEBUG_KMS("transcoder %d off " - "delay\n", pipe); - break; - } - } + if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50, 1)) + DRM_ERROR("failed to disable transcoder\n"); } temp = I915_READ(transconf_reg); @@ -2294,10 +2212,6 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE); I915_READ(pch_dpll_reg); - if (HAS_eDP) { - ironlake_disable_pll_edp(crtc); - } - /* Switch from PCDclk to Rawclk */ temp = I915_READ(fdi_rx_reg); temp &= ~FDI_SEL_PCDCLK; @@ -2372,8 +2286,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: - intel_update_watermarks(dev); - /* Enable the DPLL */ temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { @@ -2413,8 +2325,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) intel_crtc_dpms_overlay(intel_crtc, true); break; case DRM_MODE_DPMS_OFF: - intel_update_watermarks(dev); - /* Give the overlay scaler a chance to disable if it's on this pipe */ intel_crtc_dpms_overlay(intel_crtc, false); drm_vblank_off(dev, pipe); @@ -2423,9 +2333,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); - /* Disable the VGA plane that we never use */ - i915_disable_vga(dev); - /* Disable display plane */ temp = I915_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) != 0) { @@ -2435,15 +2342,13 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) I915_READ(dspbase_reg); } - if (!IS_I9XX(dev)) { - /* Wait for vblank for the disable to take effect */ - intel_wait_for_vblank(dev); - } - /* Don't disable pipe A or pipe A PLLs if needed */ if (pipeconf_reg == PIPEACONF && - (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + (dev_priv->quirks & QUIRK_PIPEA_FORCE)) { + /* Wait for vblank for the disable to take effect */ + intel_wait_for_vblank(dev, pipe); goto skip_pipe_off; + } /* Next, disable display pipes */ temp = I915_READ(pipeconf_reg); @@ -2452,8 +2357,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) I915_READ(pipeconf_reg); } - /* Wait for vblank for the disable to take effect. */ - intel_wait_for_vblank(dev); + /* Wait for the pipe to turn off */ + intel_wait_for_pipe_off(dev, pipe); temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) != 0) { @@ -2469,9 +2374,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) /** * Sets the power management mode of the pipe and plane. - * - * This code should probably grow support for turning the cursor off and back - * on appropriately at the same time as we're turning the pipe off/on. */ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) { @@ -2482,9 +2384,29 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) int pipe = intel_crtc->pipe; bool enabled; - dev_priv->display.dpms(crtc, mode); + if (intel_crtc->dpms_mode == mode) + return; intel_crtc->dpms_mode = mode; + intel_crtc->cursor_on = mode == DRM_MODE_DPMS_ON; + + /* When switching on the display, ensure that SR is disabled + * with multiple pipes prior to enabling to new pipe. + * + * When switching off the display, make sure the cursor is + * properly hidden prior to disabling the pipe. + */ + if (mode == DRM_MODE_DPMS_ON) + intel_update_watermarks(dev); + else + intel_crtc_update_cursor(crtc); + + dev_priv->display.dpms(crtc, mode); + + if (mode == DRM_MODE_DPMS_ON) + intel_crtc_update_cursor(crtc); + else + intel_update_watermarks(dev); if (!dev->primary->master) return; @@ -2536,16 +2458,38 @@ void intel_encoder_commit (struct drm_encoder *encoder) encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); } +void intel_encoder_destroy(struct drm_encoder *encoder) +{ + struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder); + + if (intel_encoder->ddc_bus) + intel_i2c_destroy(intel_encoder->ddc_bus); + + if (intel_encoder->i2c_bus) + intel_i2c_destroy(intel_encoder->i2c_bus); + + drm_encoder_cleanup(encoder); + kfree(intel_encoder); +} + static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = crtc->dev; + if (HAS_PCH_SPLIT(dev)) { /* FDI link clock is fixed at 2.7G */ if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4) return false; } + + /* XXX some encoders set the crtcinfo, others don't. + * Obviously we need some form of conflict resolution here... + */ + if (adjusted_mode->crtc_htotal == 0) + drm_mode_set_crtcinfo(adjusted_mode, 0); + return true; } @@ -2845,14 +2789,8 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz, /* Don't promote wm_size to unsigned... */ if (wm_size > (long)wm->max_wm) wm_size = wm->max_wm; - if (wm_size <= 0) { + if (wm_size <= 0) wm_size = wm->default_wm; - DRM_ERROR("Insufficient FIFO for plane, expect flickering:" - " entries required = %ld, available = %lu.\n", - entries_required + wm->guard_size, - wm->fifo_size); - } - return wm_size; } @@ -2867,7 +2805,7 @@ struct cxsr_latency { unsigned long cursor_hpll_disable; }; -static struct cxsr_latency cxsr_latency_table[] = { +static const struct cxsr_latency cxsr_latency_table[] = { {1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */ {1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */ {1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */ @@ -2905,11 +2843,13 @@ static struct cxsr_latency cxsr_latency_table[] = { {0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */ }; -static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int is_ddr3, - int fsb, int mem) +static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, + int is_ddr3, + int fsb, + int mem) { + const struct cxsr_latency *latency; int i; - struct cxsr_latency *latency; if (fsb == 0 || mem == 0) return NULL; @@ -2930,13 +2870,9 @@ static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int is_ddr3, static void pineview_disable_cxsr(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 reg; /* deactivate cxsr */ - reg = I915_READ(DSPFW3); - reg &= ~(PINEVIEW_SELF_REFRESH_EN); - I915_WRITE(DSPFW3, reg); - DRM_INFO("Big FIFO is disabled\n"); + I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN); } /* @@ -3024,12 +2960,12 @@ static void pineview_update_wm(struct drm_device *dev, int planea_clock, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; + const struct cxsr_latency *latency; u32 reg; unsigned long wm; - struct cxsr_latency *latency; int sr_clock; - latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, + latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, dev_priv->fsb_freq, dev_priv->mem_freq); if (!latency) { DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n"); @@ -3075,9 +3011,8 @@ static void pineview_update_wm(struct drm_device *dev, int planea_clock, DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg); /* activate cxsr */ - reg = I915_READ(DSPFW3); - reg |= PINEVIEW_SELF_REFRESH_EN; - I915_WRITE(DSPFW3, reg); + I915_WRITE(DSPFW3, + I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN); DRM_DEBUG_KMS("Self-refresh is enabled\n"); } else { pineview_disable_cxsr(dev); @@ -3354,12 +3289,11 @@ static void ironlake_update_wm(struct drm_device *dev, int planea_clock, int line_count; int planea_htotal = 0, planeb_htotal = 0; struct drm_crtc *crtc; - struct intel_crtc *intel_crtc; /* Need htotal for all active display plane */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - intel_crtc = to_intel_crtc(crtc); - if (crtc->enabled) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + if (intel_crtc->dpms_mode == DRM_MODE_DPMS_ON) { if (intel_crtc->plane == 0) planea_htotal = crtc->mode.htotal; else @@ -3470,8 +3404,7 @@ static void ironlake_update_wm(struct drm_device *dev, int planea_clock, reg_value = I915_READ(WM1_LP_ILK); reg_value &= ~(WM1_LP_LATENCY_MASK | WM1_LP_SR_MASK | WM1_LP_CURSOR_MASK); - reg_value |= WM1_LP_SR_EN | - (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) | + reg_value |= (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) | (sr_wm << WM1_LP_SR_SHIFT) | cursor_wm; I915_WRITE(WM1_LP_ILK, reg_value); @@ -3519,7 +3452,6 @@ static void intel_update_watermarks(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc; - struct intel_crtc *intel_crtc; int sr_hdisplay = 0; unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; int enabled = 0, pixel_size = 0; @@ -3530,8 +3462,8 @@ static void intel_update_watermarks(struct drm_device *dev) /* Get the clock config from both planes */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - intel_crtc = to_intel_crtc(crtc); - if (crtc->enabled) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + if (intel_crtc->dpms_mode == DRM_MODE_DPMS_ON) { enabled++; if (intel_crtc->plane == 0) { DRM_DEBUG_KMS("plane A (pipe %d) clock: %d\n", @@ -3589,10 +3521,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf; bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; - bool is_edp = false; + struct intel_encoder *has_edp_encoder = NULL; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_encoder *encoder; - struct intel_encoder *intel_encoder = NULL; const intel_limit_t *limit; int ret; struct fdi_m_n m_n = {0}; @@ -3613,12 +3544,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, drm_vblank_pre_modeset(dev, pipe); list_for_each_entry(encoder, &mode_config->encoder_list, head) { + struct intel_encoder *intel_encoder; - if (!encoder || encoder->crtc != crtc) + if (encoder->crtc != crtc) continue; intel_encoder = enc_to_intel_encoder(encoder); - switch (intel_encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; @@ -3642,7 +3573,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, is_dp = true; break; case INTEL_OUTPUT_EDP: - is_edp = true; + has_edp_encoder = intel_encoder; break; } @@ -3720,10 +3651,10 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, int lane = 0, link_bw, bpp; /* eDP doesn't require FDI link, so just set DP M/N according to current link config */ - if (is_edp) { + if (has_edp_encoder) { target_clock = mode->clock; - intel_edp_link_config(intel_encoder, - &lane, &link_bw); + intel_edp_link_config(has_edp_encoder, + &lane, &link_bw); } else { /* DP over FDI requires target mode clock instead of link clock */ @@ -3744,7 +3675,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, temp |= PIPE_8BPC; else temp |= PIPE_6BPC; - } else if (is_edp || (is_dp && intel_pch_has_edp(crtc))) { + } else if (has_edp_encoder || (is_dp && intel_pch_has_edp(crtc))) { switch (dev_priv->edp_bpp/3) { case 8: temp |= PIPE_8BPC; @@ -3817,7 +3748,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, udelay(200); - if (is_edp) { + if (has_edp_encoder) { if (dev_priv->lvds_use_ssc) { temp |= DREF_SSC1_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); @@ -3966,9 +3897,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dpll_reg = pch_dpll_reg; } - if (is_edp) { - ironlake_disable_pll_edp(crtc); - } else if ((dpll & DPLL_VCO_ENABLE)) { + if (!has_edp_encoder) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); I915_READ(dpll_reg); @@ -4063,7 +3992,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } } - if (!is_edp) { + if (!has_edp_encoder) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll); I915_READ(dpll_reg); @@ -4142,7 +4071,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(link_m1_reg, m_n.link_m); I915_WRITE(link_n1_reg, m_n.link_n); - if (is_edp) { + if (has_edp_encoder) { ironlake_set_pll_edp(crtc, adjusted_mode->clock); } else { /* enable FDI RX PLL too */ @@ -4167,7 +4096,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(pipeconf_reg, pipeconf); I915_READ(pipeconf_reg); - intel_wait_for_vblank(dev); + intel_wait_for_vblank(dev, pipe); if (IS_IRONLAKE(dev)) { /* enable address swizzle for tiling buffer */ @@ -4180,9 +4109,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Flush the plane changes */ ret = intel_pipe_set_base(crtc, x, y, old_fb); - if ((IS_I965G(dev) || plane == 0)) - intel_update_fbc(crtc, &crtc->mode); - intel_update_watermarks(dev); drm_vblank_post_modeset(dev, pipe); @@ -4216,6 +4142,62 @@ void intel_crtc_load_lut(struct drm_crtc *crtc) } } +static void i845_update_cursor(struct drm_crtc *crtc, u32 base) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + bool visible = base != 0; + u32 cntl; + + if (intel_crtc->cursor_visible == visible) + return; + + cntl = I915_READ(CURACNTR); + if (visible) { + /* On these chipsets we can only modify the base whilst + * the cursor is disabled. + */ + I915_WRITE(CURABASE, base); + + cntl &= ~(CURSOR_FORMAT_MASK); + /* XXX width must be 64, stride 256 => 0x00 << 28 */ + cntl |= CURSOR_ENABLE | + CURSOR_GAMMA_ENABLE | + CURSOR_FORMAT_ARGB; + } else + cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); + I915_WRITE(CURACNTR, cntl); + + intel_crtc->cursor_visible = visible; +} + +static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + bool visible = base != 0; + + if (intel_crtc->cursor_visible != visible) { + uint32_t cntl = I915_READ(pipe == 0 ? CURACNTR : CURBCNTR); + if (base) { + cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); + cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + cntl |= pipe << 28; /* Connect to correct pipe */ + } else { + cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); + cntl |= CURSOR_MODE_DISABLE; + } + I915_WRITE(pipe == 0 ? CURACNTR : CURBCNTR, cntl); + + intel_crtc->cursor_visible = visible; + } + /* and commit changes on next vblank */ + I915_WRITE(pipe == 0 ? CURABASE : CURBBASE, base); +} + /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */ static void intel_crtc_update_cursor(struct drm_crtc *crtc) { @@ -4225,12 +4207,12 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; int x = intel_crtc->cursor_x; int y = intel_crtc->cursor_y; - uint32_t base, pos; + u32 base, pos; bool visible; pos = 0; - if (crtc->fb) { + if (intel_crtc->cursor_on && crtc->fb) { base = intel_crtc->cursor_addr; if (x > (int) crtc->fb->width) base = 0; @@ -4259,37 +4241,14 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc) pos |= y << CURSOR_Y_SHIFT; visible = base != 0; - if (!visible && !intel_crtc->cursor_visble) + if (!visible && !intel_crtc->cursor_visible) return; I915_WRITE(pipe == 0 ? CURAPOS : CURBPOS, pos); - if (intel_crtc->cursor_visble != visible) { - uint32_t cntl = I915_READ(pipe == 0 ? CURACNTR : CURBCNTR); - if (base) { - /* Hooray for CUR*CNTR differences */ - if (IS_MOBILE(dev) || IS_I9XX(dev)) { - cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); - cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; - cntl |= pipe << 28; /* Connect to correct pipe */ - } else { - cntl &= ~(CURSOR_FORMAT_MASK); - cntl |= CURSOR_ENABLE; - cntl |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE; - } - } else { - if (IS_MOBILE(dev) || IS_I9XX(dev)) { - cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); - cntl |= CURSOR_MODE_DISABLE; - } else { - cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); - } - } - I915_WRITE(pipe == 0 ? CURACNTR : CURBCNTR, cntl); - - intel_crtc->cursor_visble = visible; - } - /* and commit changes on next vblank */ - I915_WRITE(pipe == 0 ? CURABASE : CURBBASE, base); + if (IS_845G(dev) || IS_I865G(dev)) + i845_update_cursor(crtc, base); + else + i9xx_update_cursor(crtc, base); if (visible) intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj); @@ -4354,8 +4313,10 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, addr = obj_priv->gtt_offset; } else { + int align = IS_I830(dev) ? 16 * 1024 : 256; ret = i915_gem_attach_phys_object(dev, bo, - (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1); + (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1, + align); if (ret) { DRM_ERROR("failed to attach phys object\n"); goto fail_locked; @@ -4544,7 +4505,7 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, encoder_funcs->commit(encoder); } /* let the connector get through one full cycle before testing */ - intel_wait_for_vblank(dev); + intel_wait_for_vblank(dev, intel_crtc->pipe); return crtc; } @@ -4749,7 +4710,7 @@ static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule) dpll &= ~DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); dpll = I915_READ(dpll_reg); - intel_wait_for_vblank(dev); + intel_wait_for_vblank(dev, pipe); dpll = I915_READ(dpll_reg); if (dpll & DISPLAY_RATE_SELECT_FPA1) DRM_DEBUG_DRIVER("failed to upclock LVDS!\n"); @@ -4793,7 +4754,7 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc) dpll |= DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); dpll = I915_READ(dpll_reg); - intel_wait_for_vblank(dev); + intel_wait_for_vblank(dev, pipe); dpll = I915_READ(dpll_reg); if (!(dpll & DISPLAY_RATE_SELECT_FPA1)) DRM_DEBUG_DRIVER("failed to downclock LVDS!\n"); @@ -4916,15 +4877,6 @@ static void intel_crtc_destroy(struct drm_crtc *crtc) kfree(intel_crtc); } -struct intel_unpin_work { - struct work_struct work; - struct drm_device *dev; - struct drm_gem_object *old_fb_obj; - struct drm_gem_object *pending_flip_obj; - struct drm_pending_vblank_event *event; - int pending; -}; - static void intel_unpin_work_fn(struct work_struct *__work) { struct intel_unpin_work *work = @@ -5012,7 +4964,8 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane) spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { - intel_crtc->unpin_work->pending = 1; + if ((++intel_crtc->unpin_work->pending) > 1) + DRM_ERROR("Prepared flip multiple times\n"); } else { DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n"); } @@ -5031,9 +4984,9 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; unsigned long flags, offset; - int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC; - int ret, pipesrc; - u32 flip_mask; + int pipe = intel_crtc->pipe; + u32 pf, pipesrc; + int ret; work = kzalloc(sizeof *work, GFP_KERNEL); if (work == NULL) @@ -5082,34 +5035,73 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, atomic_inc(&obj_priv->pending_flip); work->pending_flip_obj = obj; - if (intel_crtc->plane) - flip_mask = I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; - else - flip_mask = I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT; + if (IS_GEN3(dev) || IS_GEN2(dev)) { + u32 flip_mask; - /* Wait for any previous flip to finish */ - if (IS_GEN3(dev)) - while (I915_READ(ISR) & flip_mask) - ; + if (intel_crtc->plane) + flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; + else + flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; + + BEGIN_LP_RING(2); + OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); + OUT_RING(0); + ADVANCE_LP_RING(); + } + + work->enable_stall_check = true; /* Offset into the new buffer for cases of shared fbs between CRTCs */ - offset = obj_priv->gtt_offset; - offset += (crtc->y * fb->pitch) + (crtc->x * (fb->bits_per_pixel) / 8); + offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; BEGIN_LP_RING(4); - if (IS_I965G(dev)) { + switch(INTEL_INFO(dev)->gen) { + case 2: OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); - OUT_RING(offset | obj_priv->tiling_mode); - pipesrc = I915_READ(pipesrc_reg); - OUT_RING(pipesrc & 0x0fff0fff); - } else { + OUT_RING(obj_priv->gtt_offset + offset); + OUT_RING(MI_NOOP); + break; + + case 3: OUT_RING(MI_DISPLAY_FLIP_I915 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); - OUT_RING(offset); + OUT_RING(obj_priv->gtt_offset + offset); OUT_RING(MI_NOOP); + break; + + case 4: + case 5: + /* i965+ uses the linear or tiled offsets from the + * Display Registers (which do not change across a page-flip) + * so we need only reprogram the base address. + */ + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode); + + /* XXX Enabling the panel-fitter across page-flip is so far + * untested on non-native modes, so ignore it for now. + * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; + */ + pf = 0; + pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + break; + + case 6: + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch | obj_priv->tiling_mode); + OUT_RING(obj_priv->gtt_offset); + + pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; + pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + break; } ADVANCE_LP_RING(); @@ -5190,7 +5182,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; intel_crtc->cursor_addr = 0; - intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF; + intel_crtc->dpms_mode = -1; drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); intel_crtc->busy = false; @@ -5432,37 +5424,37 @@ static const struct drm_mode_config_funcs intel_mode_funcs = { }; static struct drm_gem_object * -intel_alloc_power_context(struct drm_device *dev) +intel_alloc_context_page(struct drm_device *dev) { - struct drm_gem_object *pwrctx; + struct drm_gem_object *ctx; int ret; - pwrctx = i915_gem_alloc_object(dev, 4096); - if (!pwrctx) { + ctx = i915_gem_alloc_object(dev, 4096); + if (!ctx) { DRM_DEBUG("failed to alloc power context, RC6 disabled\n"); return NULL; } mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_pin(pwrctx, 4096); + ret = i915_gem_object_pin(ctx, 4096); if (ret) { DRM_ERROR("failed to pin power context: %d\n", ret); goto err_unref; } - ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1); + ret = i915_gem_object_set_to_gtt_domain(ctx, 1); if (ret) { DRM_ERROR("failed to set-domain on power context: %d\n", ret); goto err_unpin; } mutex_unlock(&dev->struct_mutex); - return pwrctx; + return ctx; err_unpin: - i915_gem_object_unpin(pwrctx); + i915_gem_object_unpin(ctx); err_unref: - drm_gem_object_unreference(pwrctx); + drm_gem_object_unreference(ctx); mutex_unlock(&dev->struct_mutex); return NULL; } @@ -5494,7 +5486,6 @@ void ironlake_enable_drps(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; u32 rgvmodectl = I915_READ(MEMMODECTL); u8 fmax, fmin, fstart, vstart; - int i = 0; /* 100ms RC evaluation intervals */ I915_WRITE(RCUPEI, 100000); @@ -5538,13 +5529,8 @@ void ironlake_enable_drps(struct drm_device *dev) rgvmodectl |= MEMMODE_SWMODE_EN; I915_WRITE(MEMMODECTL, rgvmodectl); - while (I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) { - if (i++ > 100) { - DRM_ERROR("stuck trying to change perf mode\n"); - break; - } - msleep(1); - } + if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 1, 0)) + DRM_ERROR("stuck trying to change perf mode\n"); msleep(1); ironlake_set_drps(dev, fstart); @@ -5704,6 +5690,9 @@ void intel_init_clock_gating(struct drm_device *dev) I915_WRITE(DISP_ARB_CTL, (I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS)); + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); } /* * Based on the document from hardware guys the following bits @@ -5768,6 +5757,29 @@ void intel_init_clock_gating(struct drm_device *dev) * GPU can automatically power down the render unit if given a page * to save state. */ + if (IS_IRONLAKE_M(dev)) { + if (dev_priv->renderctx == NULL) + dev_priv->renderctx = intel_alloc_context_page(dev); + if (dev_priv->renderctx) { + struct drm_i915_gem_object *obj_priv; + obj_priv = to_intel_bo(dev_priv->renderctx); + if (obj_priv) { + BEGIN_LP_RING(4); + OUT_RING(MI_SET_CONTEXT); + OUT_RING(obj_priv->gtt_offset | + MI_MM_SPACE_GTT | + MI_SAVE_EXT_STATE_EN | + MI_RESTORE_EXT_STATE_EN | + MI_RESTORE_INHIBIT); + OUT_RING(MI_NOOP); + OUT_RING(MI_FLUSH); + ADVANCE_LP_RING(); + } + } else + DRM_DEBUG_KMS("Failed to allocate render context." + "Disable RC6\n"); + } + if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) { struct drm_i915_gem_object *obj_priv = NULL; @@ -5776,7 +5788,7 @@ void intel_init_clock_gating(struct drm_device *dev) } else { struct drm_gem_object *pwrctx; - pwrctx = intel_alloc_power_context(dev); + pwrctx = intel_alloc_context_page(dev); if (pwrctx) { dev_priv->pwrctx = pwrctx; obj_priv = to_intel_bo(pwrctx); @@ -5948,6 +5960,29 @@ static void intel_init_quirks(struct drm_device *dev) } } +/* Disable the VGA plane that we never use */ +static void i915_disable_vga(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u8 sr1; + u32 vga_reg; + + if (HAS_PCH_SPLIT(dev)) + vga_reg = CPU_VGACNTRL; + else + vga_reg = VGACNTRL; + + vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); + outb(1, VGA_SR_INDEX); + sr1 = inb(VGA_SR_DATA); + outb(sr1 | 1<<5, VGA_SR_DATA); + vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); + udelay(300); + + I915_WRITE(vga_reg, VGA_DISP_DISABLE); + POSTING_READ(vga_reg); +} + void intel_modeset_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -5996,6 +6031,9 @@ void intel_modeset_init(struct drm_device *dev) intel_init_clock_gating(dev); + /* Just disable it once at startup */ + i915_disable_vga(dev); + if (IS_IRONLAKE_M(dev)) { ironlake_enable_drps(dev); intel_init_emon(dev); @@ -6034,6 +6072,16 @@ void intel_modeset_cleanup(struct drm_device *dev) if (dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); + if (dev_priv->renderctx) { + struct drm_i915_gem_object *obj_priv; + + obj_priv = to_intel_bo(dev_priv->renderctx); + I915_WRITE(CCID, obj_priv->gtt_offset &~ CCID_EN); + I915_READ(CCID); + i915_gem_object_unpin(dev_priv->renderctx); + drm_gem_object_unreference(dev_priv->renderctx); + } + if (dev_priv->pwrctx) { struct drm_i915_gem_object *obj_priv; |