diff options
Diffstat (limited to 'drivers/dma/at_xdmac.c')
| -rw-r--r-- | drivers/dma/at_xdmac.c | 82 |
1 files changed, 57 insertions, 25 deletions
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index ffa809f30b19..c5e6c82516ce 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -238,7 +238,7 @@ struct at_xdmac_lld { u32 mbr_cfg; /* Configuration Register */ }; - +/* 64-bit alignment needed to update CNDA and CUBC registers in an atomic way. */ struct at_xdmac_desc { struct at_xdmac_lld lld; enum dma_transfer_direction direction; @@ -249,7 +249,7 @@ struct at_xdmac_desc { unsigned int xfer_size; struct list_head descs_list; struct list_head xfer_node; -}; +} __aligned(sizeof(u64)); static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb) { @@ -930,6 +930,7 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, u32 cur_nda, check_nda, cur_ubc, mask, value; u8 dwidth = 0; unsigned long flags; + bool initd; ret = dma_cookie_status(chan, cookie, txstate); if (ret == DMA_COMPLETE) @@ -954,7 +955,16 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, residue = desc->xfer_size; /* * Flush FIFO: only relevant when the transfer is source peripheral - * synchronized. + * synchronized. Flush is needed before reading CUBC because data in + * the FIFO are not reported by CUBC. Reporting a residue of the + * transfer length while we have data in FIFO can cause issue. + * Usecase: atmel USART has a timeout which means I have received + * characters but there is no more character received for a while. On + * timeout, it requests the residue. If the data are in the DMA FIFO, + * we will return a residue of the transfer length. It means no data + * received. If an application is waiting for these data, it will hang + * since we won't have another USART timeout without receiving new + * data. */ mask = AT_XDMAC_CC_TYPE | AT_XDMAC_CC_DSYNC; value = AT_XDMAC_CC_TYPE_PER_TRAN | AT_XDMAC_CC_DSYNC_PER2MEM; @@ -965,34 +975,43 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, } /* - * When processing the residue, we need to read two registers but we - * can't do it in an atomic way. AT_XDMAC_CNDA is used to find where - * we stand in the descriptor list and AT_XDMAC_CUBC is used - * to know how many data are remaining for the current descriptor. - * Since the dma channel is not paused to not loose data, between the - * AT_XDMAC_CNDA and AT_XDMAC_CUBC read, we may have change of - * descriptor. - * For that reason, after reading AT_XDMAC_CUBC, we check if we are - * still using the same descriptor by reading a second time - * AT_XDMAC_CNDA. If AT_XDMAC_CNDA has changed, it means we have to - * read again AT_XDMAC_CUBC. + * The easiest way to compute the residue should be to pause the DMA + * but doing this can lead to miss some data as some devices don't + * have FIFO. + * We need to read several registers because: + * - DMA is running therefore a descriptor change is possible while + * reading these registers + * - When the block transfer is done, the value of the CUBC register + * is set to its initial value until the fetch of the next descriptor. + * This value will corrupt the residue calculation so we have to skip + * it. + * + * INITD -------- ------------ + * |____________________| + * _______________________ _______________ + * NDA @desc2 \/ @desc3 + * _______________________/\_______________ + * __________ ___________ _______________ + * CUBC 0 \/ MAX desc1 \/ MAX desc2 + * __________/\___________/\_______________ + * + * Since descriptors are aligned on 64 bits, we can assume that + * the update of NDA and CUBC is atomic. * Memory barriers are used to ensure the read order of the registers. - * A max number of retries is set because unlikely it can never ends if - * we are transferring a lot of data with small buffers. + * A max number of retries is set because unlikely it could never ends. */ - cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; - rmb(); - cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC); for (retry = 0; retry < AT_XDMAC_RESIDUE_MAX_RETRIES; retry++) { - rmb(); check_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; - - if (likely(cur_nda == check_nda)) - break; - - cur_nda = check_nda; + rmb(); + initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD); rmb(); cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC); + rmb(); + cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; + rmb(); + + if ((check_nda == cur_nda) && initd) + break; } if (unlikely(retry >= AT_XDMAC_RESIDUE_MAX_RETRIES)) { @@ -1001,6 +1020,19 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, } /* + * Flush FIFO: only relevant when the transfer is source peripheral + * synchronized. Another flush is needed here because CUBC is updated + * when the controller sends the data write command. It can lead to + * report data that are not written in the memory or the device. The + * FIFO flush ensures that data are really written. + */ + if ((desc->lld.mbr_cfg & mask) == value) { + at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask); + while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS)) + cpu_relax(); + } + + /* * Remove size of all microblocks already transferred and the current * one. Then add the remaining size to transfer of the current * microblock. |