diff options
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r-- | arch/arm/mach-omap2/cpuidle34xx.c | 69 | ||||
-rw-r--r-- | arch/arm/mach-omap2/gpmc-onenand.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap2/io.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.c | 17 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 12 | ||||
-rw-r--r-- | arch/arm/mach-omap2/prcm43xx.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/sleep34xx.S | 61 | ||||
-rw-r--r-- | arch/arm/mach-omap2/sleep44xx.S | 25 |
10 files changed, 148 insertions, 48 deletions
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index aa7b379e2661..2a3db0bd9e15 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -34,6 +34,7 @@ #include "pm.h" #include "control.h" #include "common.h" +#include "soc.h" /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { @@ -315,6 +316,69 @@ static struct cpuidle_driver omap3_idle_driver = { .safe_state_index = 0, }; +/* + * Numbers based on measurements made in October 2009 for PM optimized kernel + * with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP, + * and worst case latencies). + */ +static struct cpuidle_driver omap3430_idle_driver = { + .name = "omap3430_idle", + .owner = THIS_MODULE, + .states = { + { + .enter = omap3_enter_idle_bm, + .exit_latency = 110 + 162, + .target_residency = 5, + .name = "C1", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 106 + 180, + .target_residency = 309, + .name = "C2", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 107 + 410, + .target_residency = 46057, + .name = "C3", + .desc = "MPU RET + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 121 + 3374, + .target_residency = 46057, + .name = "C4", + .desc = "MPU OFF + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 855 + 1146, + .target_residency = 46057, + .name = "C5", + .desc = "MPU RET + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7580 + 4134, + .target_residency = 484329, + .name = "C6", + .desc = "MPU OFF + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7505 + 15274, + .target_residency = 484329, + .name = "C7", + .desc = "MPU OFF + CORE OFF", + }, + }, + .state_count = ARRAY_SIZE(omap3_idle_data), + .safe_state_index = 0, +}; + /* Public functions */ /** @@ -333,5 +397,8 @@ int __init omap3_idle_init(void) if (!mpu_pd || !core_pd || !per_pd || !cam_pd) return -ENODEV; - return cpuidle_register(&omap3_idle_driver, NULL); + if (cpu_is_omap3430()) + return cpuidle_register(&omap3430_idle_driver, NULL); + else + return cpuidle_register(&omap3_idle_driver, NULL); } diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 7b76ce01c21d..8633c703546a 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base) static void set_onenand_cfg(void __iomem *onenand_base) { - u32 reg; + u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT; - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; if (onenand_flags & ONENAND_FLAG_SYNCREAD) @@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); } @@ -289,6 +288,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) } } + onenand_async.sync_write = true; omap2_onenand_calc_async_timings(&t); ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3eaeaca5da05..3a911d8dea8b 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -368,6 +368,7 @@ void __init omap5_map_io(void) void __init dra7xx_map_io(void) { iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc)); + omap_barriers_init(); } #endif /* diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 48495ad82aba..147c90e70b2e 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1416,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If the cached value is the same as the new value, skip the write */ - if (oh->_sysc_cache != v) - _write_sysconfig(v, oh); + _write_sysconfig(v, oh); /* * Set the autoidle bit only after setting the smartidle bit @@ -1481,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - _write_sysconfig(v, oh); + /* If the cached value is the same as the new value, skip the write */ + if (oh->_sysc_cache != v) + _write_sysconfig(v, oh); } /** @@ -2200,6 +2200,11 @@ static int _enable(struct omap_hwmod *oh) */ static int _idle(struct omap_hwmod *oh) { + if (oh->flags & HWMOD_NO_IDLE) { + oh->_int_flags |= _HWMOD_SKIP_ENABLE; + return 0; + } + pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { @@ -2504,6 +2509,8 @@ static int __init _init(struct omap_hwmod *oh, void *data) oh->flags |= HWMOD_INIT_NO_RESET; if (of_find_property(np, "ti,no-idle-on-init", NULL)) oh->flags |= HWMOD_INIT_NO_IDLE; + if (of_find_property(np, "ti,no-idle", NULL)) + oh->flags |= HWMOD_NO_IDLE; } oh->_state = _HWMOD_STATE_INITIALIZED; @@ -2630,7 +2637,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh) * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data - * it should be set by the core code as a runtime flag during startup */ - if ((oh->flags & HWMOD_INIT_NO_IDLE) && + if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) && (postsetup_state == _HWMOD_STATE_IDLE)) { oh->_int_flags |= _HWMOD_SKIP_ENABLE; postsetup_state = _HWMOD_STATE_ENABLED; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 76bce11c85a4..7c7a31169475 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -525,6 +525,8 @@ struct omap_hwmod_omap4_prcm { * or idled. * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to * operate and they need to be handled at the same time as the main_clk. + * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain + * IPs like CPSW on DRA7, where clocks to this module cannot be disabled. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -541,6 +543,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_SWSUP_SIDLE_ACT (1 << 12) #define HWMOD_RECONFIG_IO_CHAIN (1 << 13) #define HWMOD_OPT_CLKS_NEEDED (1 << 14) +#define HWMOD_NO_IDLE (1 << 15) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 907a452b78ea..b31ad596be79 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -1474,6 +1474,7 @@ static void omap_hwmod_am43xx_rst(void) { RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET); RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET); + RSTST(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTST_OFFSET); RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET); } diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index aff78d5198d2..131f8967589b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -723,8 +723,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { * display serial interface controller */ +static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { .name = "dsi", + .sysc = &omap3xxx_dsi_sysc, }; static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index 7c34c44eb0ae..babb5db5a3a4 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -39,6 +39,7 @@ /* RM RSTST offsets */ #define AM43XX_RM_GFX_RSTST_OFFSET 0x0014 +#define AM43XX_RM_PER_RSTST_OFFSET 0x0014 #define AM43XX_RM_WKUP_RSTST_OFFSET 0x0014 /* CM instances */ diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index eafd120b53f1..1b9f0520dea9 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) stmfd sp!, {lr} @ save registers on stack /* Setup so that we will disable and enable l2 */ mov r1, #0x1 - adrl r2, l2dis_3630 @ may be too distant for plain adr - str r1, [r2] + adrl r3, l2dis_3630_offset @ may be too distant for plain adr + ldr r2, [r3] @ value for offset + str r1, [r2, r3] @ write to l2dis_3630 ldmfd sp!, {pc} @ restore regs and return ENDPROC(enable_omap3630_toggle_l2_on_restore) - .text -/* Function to call rom code to save secure ram context */ +/* + * Function to call rom code to save secure ram context. This gets + * relocated to SRAM, so it can be all in .data section. Otherwise + * we need to initialize api_params separately. + */ + .data .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack @@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context) ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context + .text + /* * ====================== * == Idle entry point == @@ -289,12 +296,6 @@ wait_sdrc_ready: bic r5, r5, #0x40 str r5, [r4] -/* - * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a - * base instead. - * Be careful not to clobber r7 when maintaing this code. - */ - is_dll_in_lock_mode: /* Is dll in lock mode? */ ldr r4, sdrc_dlla_ctrl @@ -302,11 +303,7 @@ is_dll_in_lock_mode: tst r5, #0x4 bne exit_nonoff_modes @ Return if locked /* wait till dll locks */ - adr r7, kick_counter wait_dll_lock_timed: - ldr r4, wait_dll_lock_counter - add r4, r4, #1 - str r4, [r7, #wait_dll_lock_counter - kick_counter] ldr r4, sdrc_dlla_status /* Wait 20uS for lock */ mov r6, #8 @@ -330,9 +327,6 @@ kick_dll: orr r6, r6, #(1<<3) @ enable dll str r6, [r4] dsb - ldr r4, kick_counter - add r4, r4, #1 - str r4, [r7] @ kick_counter b wait_dll_lock_timed exit_nonoff_modes: @@ -360,15 +354,6 @@ sdrc_dlla_status: .word SDRC_DLLA_STATUS_V sdrc_dlla_ctrl: .word SDRC_DLLA_CTRL_V - /* - * When exporting to userspace while the counters are in SRAM, - * these 2 words need to be at the end to facilitate retrival! - */ -kick_counter: - .word 0 -wait_dll_lock_counter: - .word 0 - ENTRY(omap3_do_wfi_sz) .word . - omap3_do_wfi @@ -437,7 +422,9 @@ ENTRY(omap3_restore) cmp r2, #0x0 @ Check if target power state was OFF or RET bne logic_l1_restore - ldr r0, l2dis_3630 + adr r1, l2dis_3630_offset @ address for offset + ldr r0, [r1] @ value for offset + ldr r0, [r1, r0] @ value at l2dis_3630 cmp r0, #0x1 @ should we disable L2 on 3630? bne skipl2dis mrc p15, 0, r0, c1, c0, 1 @@ -449,12 +436,14 @@ skipl2dis: and r1, #0x700 cmp r1, #0x300 beq l2_inv_gp + adr r0, l2_inv_api_params_offset + ldr r3, [r0] + add r3, r3, r0 @ r3 points to dummy parameters mov r0, #40 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff - adr r3, l2_inv_api_params @ r3 points to dummy parameters dsb @ data write barrier dmb @ data memory barrier smc #1 @ call SMI monitor (smi #1) @@ -488,8 +477,8 @@ skipl2dis: b logic_l1_restore .align -l2_inv_api_params: - .word 0x1, 0x00 +l2_inv_api_params_offset: + .long l2_inv_api_params - . l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalidate L2 @@ -506,7 +495,9 @@ l2_inv_gp: mov r12, #0x2 smc #0 @ Call SMI monitor (smieq) logic_l1_restore: - ldr r1, l2dis_3630 + adr r0, l2dis_3630_offset @ adress for offset + ldr r1, [r0] @ value for offset + ldr r1, [r0, r1] @ value at l2dis_3630 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 bne skipl2reen mrc p15, 0, r1, c1, c0, 1 @@ -535,9 +526,17 @@ control_stat: .word CONTROL_STAT control_mem_rta: .word CONTROL_MEM_RTA_CTRL +l2dis_3630_offset: + .long l2dis_3630 - . + + .data l2dis_3630: .word 0 + .data +l2_inv_api_params: + .word 0x1, 0x00 + /* * Internal functions */ diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9b09d85d811a..c7a3b4aab4b5 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -29,12 +29,6 @@ dsb .endm -ppa_zero_params: - .word 0x0 - -ppa_por_params: - .word 1, 0 - #ifdef CONFIG_ARCH_OMAP4 /* @@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume) beq skip_ns_smp_enable ppa_actrl_retry: mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX - adr r3, ppa_zero_params @ Pointer to parameters + adr r1, ppa_zero_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_zero_params mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag mov r6, #0xff @@ -303,7 +299,9 @@ skip_ns_smp_enable: ldr r0, =OMAP4_PPA_L2_POR_INDEX ldr r1, =OMAP44XX_SAR_RAM_BASE ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] - adr r3, ppa_por_params + adr r1, ppa_por_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_por_params str r4, [r3, #0x04] mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag @@ -328,6 +326,8 @@ skip_l2en: #endif b cpu_resume @ Jump to generic resume +ppa_por_params_offset: + .long ppa_por_params - . ENDPROC(omap4_cpu_resume) #endif /* CONFIG_ARCH_OMAP4 */ @@ -380,4 +380,13 @@ ENTRY(omap_do_wfi) nop ldmfd sp!, {pc} +ppa_zero_params_offset: + .long ppa_zero_params - . ENDPROC(omap_do_wfi) + + .data +ppa_zero_params: + .word 0 + +ppa_por_params: + .word 1, 0 |