diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-h2.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 34 |
1 files changed, 14 insertions, 20 deletions
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index d1100e4f65ac..197adb49dc5a 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -292,15 +292,6 @@ static struct platform_device h2_kp_device = { #define H2_IRDA_FIRSEL_GPIO_PIN 17 -#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) -static int h2_transceiver_mode(struct device *dev, int state) -{ - /* SIR when low, else MIR/FIR when HIGH */ - gpio_set_value(H2_IRDA_FIRSEL_GPIO_PIN, !(state & IR_SIRMODE)); - return 0; -} -#endif - static struct omap_irda_config h2_irda_data = { .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, .rx_channel = OMAP_DMA_UART3_RX, @@ -437,14 +428,18 @@ static void __init h2_init(void) /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ - /* Irda */ -#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) - omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A); - if (gpio_request(H2_IRDA_FIRSEL_GPIO_PIN, "IRDA mode") < 0) - BUG(); - gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0); - h2_irda_data.transceiver_mode = h2_transceiver_mode; -#endif + /* Mux pins for keypad */ + omap_cfg_reg(F18_1610_KBC0); + omap_cfg_reg(D20_1610_KBC1); + omap_cfg_reg(D19_1610_KBC2); + omap_cfg_reg(E18_1610_KBC3); + omap_cfg_reg(C21_1610_KBC4); + omap_cfg_reg(G18_1610_KBR0); + omap_cfg_reg(F19_1610_KBR1); + omap_cfg_reg(H14_1610_KBR2); + omap_cfg_reg(E20_1610_KBR3); + omap_cfg_reg(E19_1610_KBR4); + omap_cfg_reg(N19_1610_KBR5); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; @@ -452,7 +447,7 @@ static void __init h2_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); - omap_usb_init(&h2_usb_config); + omap1_usb_init(&h2_usb_config); h2_mmc_init(); } @@ -463,10 +458,9 @@ static void __init h2_map_io(void) MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak <imre.deak@nokia.com> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = h2_map_io, + .reserve = omap_reserve, .init_irq = h2_init_irq, .init_machine = h2_init, .timer = &omap_timer, |