diff options
Diffstat (limited to 'arch/arm/mach-integrator/pci_v3.c')
| -rw-r--r-- | arch/arm/mach-integrator/pci_v3.c | 23 |
1 files changed, 14 insertions, 9 deletions
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index bbeca59df66b..000edcda4596 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -388,9 +388,10 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) * means I can't get additional information on the reason for the pm2fb * problems. I suppose I'll just have to mind-meld with the machine. ;) */ -#define SC_PCI __io_address(INTEGRATOR_SC_PCIENABLE) -#define SC_LBFADDR __io_address(INTEGRATOR_SC_BASE + 0x20) -#define SC_LBFCODE __io_address(INTEGRATOR_SC_BASE + 0x24) +static void __iomem *ap_syscon_base; +#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 +#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20 +#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24 static int v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -401,13 +402,13 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) char buf[128]; sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", - addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printk(KERN_DEBUG "%s", buf); #endif v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * If the instruction being executed was a read, @@ -449,15 +450,15 @@ static irqreturn_t v3_irq(int dummy, void *devid) sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, - __raw_readl(SC_LBFADDR), - __raw_readl(SC_LBFCODE) & 255, + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printascii(buf); #endif v3_writew(V3_PCI_STAT, 0xf000); v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); #ifdef CONFIG_DEBUG_LL /* @@ -480,6 +481,10 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) + return -EINVAL; } return ret; @@ -568,7 +573,7 @@ void __init pci_v3_preinit(void) v3_writeb(V3_LB_ISTAT, 0); v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10)); v3_writeb(V3_LB_IMASK, 0x28); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * Grab the PCI error interrupt. |