diff options
Diffstat (limited to 'arch/arm/mach-at91')
61 files changed, 698 insertions, 791 deletions
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 96966231920c..bf57e8b1c9d0 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := irq.o gpio.o +obj-y := irq.o gpio.o setup.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index f1013d08bb57..bfc684441ef8 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -25,23 +25,10 @@ #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91cap9_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE), - .length = AT91CAP9_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -339,24 +326,17 @@ static void at91cap9_poweroff(void) * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -void __init at91cap9_map_io(void) +static void __init at91cap9_map_io(void) { - /* Map peripherals */ - iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); + at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE); } -void __init at91cap9_initialize(unsigned long main_clock) +static void __init at91cap9_initialize(void) { at91_arch_reset = at91cap9_reset; pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91cap9_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91cap9_gpio, 4); @@ -409,14 +389,9 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91cap9_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91cap9_soc = { + .map_io = at91cap9_map_io, + .default_irq_priority = at91cap9_default_irq_priority, + .register_clocks = at91cap9_register_clocks, + .init = at91cap9_initialize, +}; diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 83a1a3fee554..f73302dbc6a5 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -20,25 +20,16 @@ #include <mach/at91_st.h> #include <mach/cpu.h> +#include "soc.h" #include "generic.h" #include "clock.h" static struct map_desc at91rm9200_io_desc[] __initdata = { { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = AT91_VA_BASE_EMAC, .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), .length = SZ_16K, .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE), - .length = AT91RM9200_SRAM_SIZE, - .type = MT_DEVICE, }, }; @@ -304,24 +295,17 @@ static void at91rm9200_reset(void) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } -int rm9200_type; -EXPORT_SYMBOL(rm9200_type); - -void __init at91rm9200_set_type(int type) -{ - rm9200_type = type; -} - /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ -void __init at91rm9200_map_io(void) +static void __init at91rm9200_map_io(void) { /* Map peripherals */ + at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE); iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); } -void __init at91rm9200_initialize(unsigned long main_clock) +static void __init at91rm9200_initialize(void) { at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) @@ -329,12 +313,6 @@ void __init at91rm9200_initialize(unsigned long main_clock) | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) | (1 << AT91RM9200_ID_IRQ6); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91rm9200_register_clocks(); - /* Initialize GPIO subsystem */ at91_gpio_init(at91rm9200_gpio, cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); @@ -383,14 +361,9 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91rm9200_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91rm9200_soc = { + .map_io = at91rm9200_map_io, + .default_irq_priority = at91rm9200_default_irq_priority, + .register_clocks = at91rm9200_register_clocks, + .init = at91rm9200_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 7d606b04d313..cb397be14448 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -17,58 +17,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/cpu.h> +#include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9260_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - } -}; - -static struct map_desc at91sam9260_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE, - .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE), - .length = AT91SAM9260_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE, - .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE), - .length = AT91SAM9260_SRAM1_SIZE, - .type = MT_DEVICE, - } -}; - -static struct map_desc at91sam9g20_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G20_SRAM0_BASE), - .length = AT91SAM9G20_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE - AT91SAM9G20_SRAM1_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G20_SRAM1_BASE), - .length = AT91SAM9G20_SRAM1_SIZE, - .type = MT_DEVICE, - } -}; - -static struct map_desc at91sam9xe_sram_desc[] __initdata = { - { - .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE), - .type = MT_DEVICE, - } -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -330,11 +288,9 @@ static void at91sam9260_poweroff(void) static void __init at91sam9xe_map_io(void) { - unsigned long cidr, sram_size; - - cidr = at91_sys_read(AT91_DBGU_CIDR); + unsigned long sram_size; - switch (cidr & AT91_CIDR_SRAMSIZ) { + switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) { case AT91_CIDR_SRAMSIZ_32K: sram_size = 2 * SZ_16K; break; @@ -343,38 +299,29 @@ static void __init at91sam9xe_map_io(void) sram_size = SZ_16K; } - at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; - at91sam9xe_sram_desc->length = sram_size; - - iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); + at91_init_sram(0, AT91SAM9XE_SRAM_BASE, sram_size); } -void __init at91sam9260_map_io(void) +static void __init at91sam9260_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); - - if (cpu_is_at91sam9xe()) + if (cpu_is_at91sam9xe()) { at91sam9xe_map_io(); - else if (cpu_is_at91sam9g20()) - iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); - else - iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); + } else if (cpu_is_at91sam9g20()) { + at91_init_sram(0, AT91SAM9G20_SRAM0_BASE, AT91SAM9G20_SRAM0_SIZE); + at91_init_sram(1, AT91SAM9G20_SRAM1_BASE, AT91SAM9G20_SRAM1_SIZE); + } else { + at91_init_sram(0, AT91SAM9260_SRAM0_BASE, AT91SAM9260_SRAM0_SIZE); + at91_init_sram(1, AT91SAM9260_SRAM1_BASE, AT91SAM9260_SRAM1_SIZE); + } } -void __init at91sam9260_initialize(unsigned long main_clock) +static void __init at91sam9260_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9260_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9260_gpio, 3); } @@ -421,14 +368,9 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9260_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9260_soc = { + .map_io = at91sam9260_map_io, + .default_irq_priority = at91sam9260_default_irq_priority, + .register_clocks = at91sam9260_register_clocks, + .init = at91sam9260_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index c1483168c97a..6c8e3b5f669f 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -22,36 +22,10 @@ #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9261_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc at91sam9261_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE), - .length = AT91SAM9261_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - -static struct map_desc at91sam9g10_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G10_SRAM_BASE), - .length = AT91SAM9G10_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -183,7 +157,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), @@ -302,30 +276,21 @@ static void at91sam9261_poweroff(void) * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9261_map_io(void) +static void __init at91sam9261_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); - if (cpu_is_at91sam9g10()) - iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); + at91_init_sram(0, AT91SAM9G10_SRAM_BASE, AT91SAM9G10_SRAM_SIZE); else - iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); + at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE); } -void __init at91sam9261_initialize(unsigned long main_clock) +static void __init at91sam9261_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9261_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9261_gpio, 3); } @@ -372,14 +337,9 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9261_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9261_soc = { + .map_io = at91sam9261_map_io, + .default_irq_priority = at91sam9261_default_irq_priority, + .register_clocks = at91sam9261_register_clocks, + .init = at91sam9261_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index dc28477d14ff..044f3c927e64 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -21,28 +21,10 @@ #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9263_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE, - .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE), - .length = AT91SAM9263_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE, - .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE), - .length = AT91SAM9263_SRAM1_SIZE, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -313,24 +295,18 @@ static void at91sam9263_poweroff(void) * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9263_map_io(void) +static void __init at91sam9263_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); + at91_init_sram(0, AT91SAM9263_SRAM0_BASE, AT91SAM9263_SRAM0_SIZE); + at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE); } -void __init at91sam9263_initialize(unsigned long main_clock) +static void __init at91sam9263_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9263_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9263_gpio, 5); } @@ -377,14 +353,9 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9263_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9263_soc = { + .map_io = at91sam9263_map_io, + .default_irq_priority = at91sam9263_default_irq_priority, + .register_clocks = at91sam9263_register_clocks, + .init = at91sam9263_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 11e214121b23..e04c5fb6f1ee 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -22,23 +22,10 @@ #include <mach/at91_shdwc.h> #include <mach/cpu.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9g45_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G45_SRAM_BASE), - .length = AT91SAM9G45_SRAM_SIZE, - .type = MT_DEVICE, - } -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -329,24 +316,17 @@ static void at91sam9g45_poweroff(void) * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9g45_map_io(void) +static void __init at91sam9g45_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); + at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); } -void __init at91sam9g45_initialize(unsigned long main_clock) +static void __init at91sam9g45_initialize(void) { at91_arch_reset = at91sam9g45_reset; pm_power_off = at91sam9g45_poweroff; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9g45_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9g45_gpio, 5); } @@ -393,14 +373,9 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9g45_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9g45_soc = { + .map_io = at91sam9g45_map_io, + .default_irq_priority = at91sam9g45_default_irq_priority, + .register_clocks = at91sam9g45_register_clocks, + .init = at91sam9g45_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 29dff18ed130..a238105d2c11 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -16,30 +16,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/cpu.h> +#include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9rl_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc at91sam9rl_sram_desc[] __initdata = { - { - .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE), - .type = MT_DEVICE, - } -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -287,16 +273,11 @@ static void at91sam9rl_poweroff(void) * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9rl_map_io(void) +static void __init at91sam9rl_map_io(void) { - unsigned long cidr, sram_size; - - /* Map peripherals */ - iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc)); - - cidr = at91_sys_read(AT91_DBGU_CIDR); + unsigned long sram_size; - switch (cidr & AT91_CIDR_SRAMSIZ) { + switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) { case AT91_CIDR_SRAMSIZ_32K: sram_size = 2 * SZ_16K; break; @@ -305,25 +286,16 @@ void __init at91sam9rl_map_io(void) sram_size = SZ_16K; } - at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; - at91sam9rl_sram_desc->length = sram_size; - /* Map SRAM */ - iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); + at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size); } -void __init at91sam9rl_initialize(unsigned long main_clock) +static void __init at91sam9rl_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9rl_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9rl_gpio, 4); } @@ -370,14 +342,9 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9rl_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9rl_soc = { + .map_io = at91sam9rl_map_io, + .default_irq_priority = at91sam9rl_default_irq_priority, + .register_clocks = at91sam9rl_register_clocks, + .init = at91sam9rl_initialize, +}; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index ab1d463aa47d..5aa58851eb39 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -46,7 +46,7 @@ static void __init onearm_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -63,11 +63,6 @@ static void __init onearm_init_early(void) at91_set_serial_console(0); } -static void __init onearm_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata onearm_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -97,8 +92,8 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = onearm_init_early, - .init_irq = onearm_init_irq, + .init_irq = at91_init_irq_default, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index a4924de48c36..b0c796d42e49 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -51,7 +51,7 @@ static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -70,12 +70,6 @@ static void __init afeb9260_init_early(void) at91_set_serial_console(0); } -static void __init afeb9260_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -219,9 +213,9 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = afeb9260_init_early, - .init_irq = afeb9260_init_irq, + .init_irq = at91_init_irq_default, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 148fccb9a25a..d1abd5898e85 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -48,7 +48,7 @@ static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ - at91sam9260_initialize(10000000); + at91_initialize(10000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -57,12 +57,6 @@ static void __init cam60_init_early(void) at91_set_serial_console(0); } -static void __init cam60_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host */ @@ -199,8 +193,8 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = cam60_init_early, - .init_irq = cam60_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index cdb65d483250..679b0b743e92 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -53,7 +53,7 @@ static void __init cap9adk_init_early(void) { /* Initialize processor: 12 MHz crystal */ - at91cap9_initialize(12000000); + at91_initialize(12000000); /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); @@ -65,12 +65,6 @@ static void __init cap9adk_init_early(void) at91_set_serial_console(0); } -static void __init cap9adk_init_irq(void) -{ - at91cap9_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -397,8 +391,8 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ .timer = &at91sam926x_timer, - .map_io = at91cap9_map_io, + .map_io = at91_map_io, .init_early = cap9adk_init_early, - .init_irq = cap9adk_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index f36b18687494..c578c5d90728 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -43,7 +43,7 @@ static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ - at91rm9200_initialize(20000000); + at91_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -57,11 +57,6 @@ static void __init carmeva_init_early(void) at91_set_serial_console(0); } -static void __init carmeva_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata carmeva_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -163,8 +158,8 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = carmeva_init_early, - .init_irq = carmeva_init_irq, + .init_irq = at91_init_irq_default, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 980511084fe4..f4da8a16d5dc 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -50,7 +50,7 @@ static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -81,11 +81,6 @@ static void __init cpu9krea_init_early(void) at91_set_serial_console(0); } -static void __init cpu9krea_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* * USB Host port */ @@ -376,8 +371,8 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = cpu9krea_init_early, - .init_irq = cpu9krea_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 6daabe3907a1..2d919f5a4f57 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -57,7 +57,7 @@ static void __init cpuat91_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -82,11 +82,6 @@ static void __init cpuat91_init_early(void) at91_set_serial_console(0); } -static void __init cpuat91_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata cpuat91_eth_data = { .is_rmii = 1, }; @@ -180,8 +175,8 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = cpuat91_init_early, - .init_irq = cpuat91_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index d98bcec1dfe0..17654d5e94e6 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -46,7 +46,7 @@ static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400); + at91_initialize(3686400); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -58,11 +58,6 @@ static void __init csb337_init_early(void) at91_set_serial_console(0); } -static void __init csb337_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata csb337_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 0, @@ -258,8 +253,8 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = csb337_init_early, - .init_irq = csb337_init_irq, + .init_irq = at91_init_irq_default, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 019aab4e20b0..72b55674616c 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -43,7 +43,7 @@ static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400); + at91_initialize(3686400); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -52,11 +52,6 @@ static void __init csb637_init_early(void) at91_set_serial_console(0); } -static void __init csb637_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata csb637_eth_data = { .phy_irq_pin = AT91_PIN_PC0, .is_rmii = 0, @@ -139,8 +134,8 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = csb637_init_early, - .init_irq = csb637_init_irq, + .init_irq = at91_init_irq_default, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index e9484535cbc8..01170a2766a8 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -43,7 +43,7 @@ static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -60,11 +60,6 @@ static void __init eb9200_init_early(void) at91_set_serial_console(0); } -static void __init eb9200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata eb9200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -121,8 +116,8 @@ static void __init eb9200_board_init(void) MACHINE_START(ATEB9200, "Embest ATEB9200") .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = eb9200_init_early, - .init_irq = eb9200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index a6f57faa10a7..7c0313c51f26 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -49,7 +49,7 @@ static void __init ecb_at91init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); @@ -64,11 +64,6 @@ static void __init ecb_at91init_early(void) at91_set_serial_console(0); } -static void __init ecb_at91init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata ecb_at91eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, @@ -173,8 +168,8 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = ecb_at91init_early, - .init_irq = ecb_at91init_irq, + .init_irq = at91_init_irq_default, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index bfc0062d1483..8252c722607b 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -35,7 +35,7 @@ static void __init eco920_init_early(void) /* Set cpu type: PQFP */ at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -47,11 +47,6 @@ static void __init eco920_init_early(void) at91_set_serial_console(0); } -static void __init eco920_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata eco920_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 1, @@ -135,8 +130,8 @@ static void __init eco920_board_init(void) MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = eco920_init_early, - .init_irq = eco920_init_irq, + .init_irq = at91_init_irq_default, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 466c063b8d21..4c3f65d9c59b 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -40,7 +40,7 @@ static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -49,11 +49,6 @@ static void __init flexibity_init_early(void) at91_set_serial_console(0); } -static void __init flexibity_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* USB Host port */ static struct at91_usbh_data __initdata flexibity_usbh_data = { .ports = 2, @@ -155,8 +150,8 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = flexibity_init_early, - .init_irq = flexibity_init_irq, + .init_irq = at91_init_irq_default, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index e2d1dc9eff45..f27d1a780cfa 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -60,7 +60,7 @@ static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -101,12 +101,6 @@ static void __init foxg20_init_early(void) } -static void __init foxg20_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -267,8 +261,8 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = foxg20_init_early, - .init_irq = foxg20_init_irq, + .init_irq = at91_init_irq_default, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 1d4f36b3cb27..2e95949737e6 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -75,11 +75,6 @@ static void __init gsia18s_init_early(void) at91_register_uart(AT91SAM9260_ID_US4, 5, 0); } -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* * Two USB Host ports */ @@ -577,8 +572,8 @@ static void __init gsia18s_board_init(void) MACHINE_START(GSIA18S, "GS_IA18_S") .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = gsia18s_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 9b003ff744ba..4a170890b3b1 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -46,7 +46,7 @@ static void __init kafa_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); @@ -61,11 +61,6 @@ static void __init kafa_init_early(void) at91_set_serial_console(0); } -static void __init kafa_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata kafa_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, @@ -99,8 +94,8 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = kafa_init_early, - .init_irq = kafa_init_irq, + .init_irq = at91_init_irq_default, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a813a74b65f9..9dc8d496ead1 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -48,7 +48,7 @@ static void __init kb9202_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000); + at91_initialize(10000000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -69,11 +69,6 @@ static void __init kb9202_init_early(void) at91_set_serial_console(0); } -static void __init kb9202_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata kb9202_eth_data = { .phy_irq_pin = AT91_PIN_PB29, .is_rmii = 0, @@ -140,8 +135,8 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = kb9202_init_early, - .init_irq = kb9202_init_irq, + .init_irq = at91_init_irq_default, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 961e805db68c..9bc6ab32e0ac 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -54,7 +54,7 @@ static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ - at91sam9263_initialize(20000000); + at91_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -66,12 +66,6 @@ static void __init neocore926_init_early(void) at91_set_serial_console(0); } -static void __init neocore926_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -388,8 +382,8 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ .timer = &at91sam926x_timer, - .map_io = at91sam9263_map_io, + .map_io = at91_map_io, .init_early = neocore926_init_early, - .init_irq = neocore926_init_irq, + .init_irq = at91_init_irq_default, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 21a21af25878..49e3f699b48e 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -53,13 +53,6 @@ static void __init pcontrol_g20_init_early(void) at91_register_uart(AT91SAM9260_ID_US4, 3, 0); } - -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .ncs_read_setup = 16, .nrd_setup = 18, @@ -223,8 +216,8 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = pcontrol_g20_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 756cc2a745dd..b7b8390e8a00 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -46,7 +46,7 @@ static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -60,11 +60,6 @@ static void __init picotux200_init_early(void) at91_set_serial_console(0); } -static void __init picotux200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata picotux200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -124,8 +119,8 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = picotux200_init_early, - .init_irq = picotux200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index d1a6001b0bd8..81f911033681 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -51,7 +51,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9260_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -72,12 +72,6 @@ static void __init ek_init_early(void) } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -269,8 +263,8 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index aef9627710b0..6f08faadb474 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -48,7 +48,7 @@ static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -65,11 +65,6 @@ static void __init dk_init_early(void) at91_set_serial_console(0); } -static void __init dk_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -228,8 +223,8 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = dk_init_early, - .init_irq = dk_init_irq, + .init_irq = at91_init_irq_default, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 015a02183080..85bcccd7b9e4 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -48,7 +48,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -65,11 +65,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -194,8 +189,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index aaf1bf0989b3..4d3a02f1289e 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -47,7 +47,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); @@ -67,12 +67,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -213,8 +207,8 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 5c240743c5b7..8a50c3e67186 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -53,7 +53,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -70,12 +70,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -354,8 +348,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b60c22b6e241..5096a0ec50c1 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -57,7 +57,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9261_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); @@ -69,12 +69,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9261_init_interrupts(NULL); -} - - /* * DM9000 ethernet device */ @@ -621,8 +615,8 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9261_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 9bbdc92ea194..ea8f185d3b9d 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -56,7 +56,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ - at91sam9263_initialize(16367660); + at91_initialize(16367660); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -68,12 +68,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -452,8 +446,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9263_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 1325a50101a8..817f59d7251b 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -64,7 +64,7 @@ static int inline ek_have_2mmc(void) static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -81,12 +81,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -404,17 +398,17 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 33eaa135f248..ad234ccbf57e 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -50,7 +50,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9g45_initialize(12000000); + at91_initialize(12000000); /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -63,12 +63,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9g45_init_interrupts(NULL); -} - - /* * USB HS Host port (common to OHCI & EHCI) */ @@ -422,8 +416,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9g45_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index effb399a80a6..4f14b54b93a8 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -41,7 +41,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9rl_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -53,12 +53,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9rl_init_interrupts(NULL); -} - - /* * USB HS Device port */ @@ -330,8 +324,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9rl_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 6010ce16b3cf..c73d25e5faea 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -42,7 +42,7 @@ static void __init snapper9260_init_early(void) { - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* Debug on ttyS0 */ at91_register_uart(0, 0, 0); @@ -55,11 +55,6 @@ static void __init snapper9260_init_early(void) at91_register_uart(AT91SAM9260_ID_US2, 3, 0); } -static void __init snapper9260_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - static struct at91_usbh_data __initdata snapper9260_usbh_data = { .ports = 2, }; @@ -179,9 +174,9 @@ static void __init snapper9260_board_init(void) MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = snapper9260_init_early, - .init_irq = snapper9260_init_irq, + .init_irq = at91_init_irq_default, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 5e5c85688f5f..936e5fd7f406 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -35,7 +35,7 @@ void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -76,12 +76,6 @@ static void __init portuxg20_init_early(void) at91_register_uart(AT91SAM9260_ID_US5, 6, 0); } -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * NAND flash */ @@ -299,17 +293,17 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = portuxg20_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = portuxg20_board_init, MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = stamp9g20evb_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 0e784e6fedec..8c4c1a02c4be 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -51,7 +51,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9260_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -60,12 +60,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -229,8 +223,8 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index cf626dd14b2c..25e793782a4e 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -50,7 +50,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ - at91sam9263_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -59,12 +59,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -245,8 +239,8 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, - .map_io = at91sam9263_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index c208cc334d7d..95edcbd2aec6 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -56,7 +56,7 @@ static void __init yl9200_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); @@ -79,12 +79,6 @@ static void __init yl9200_init_early(void) at91_set_serial_console(0); } -static void __init yl9200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - - /* * LEDs */ @@ -599,8 +593,8 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = yl9200_init_early, - .init_irq = yl9200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 8ff3418f3430..938b34f57741 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -11,35 +11,19 @@ #include <linux/clkdev.h> /* Map io */ -extern void __init at91rm9200_map_io(void); -extern void __init at91sam9260_map_io(void); -extern void __init at91sam9261_map_io(void); -extern void __init at91sam9263_map_io(void); -extern void __init at91sam9rl_map_io(void); -extern void __init at91sam9g45_map_io(void); -extern void __init at91x40_map_io(void); -extern void __init at91cap9_map_io(void); +extern void __init at91_map_io(void); +extern void __init at91_init_sram(int bank, unsigned long base, + unsigned int length); /* Processors */ extern void __init at91rm9200_set_type(int type); -extern void __init at91rm9200_initialize(unsigned long main_clock); -extern void __init at91sam9260_initialize(unsigned long main_clock); -extern void __init at91sam9261_initialize(unsigned long main_clock); -extern void __init at91sam9263_initialize(unsigned long main_clock); -extern void __init at91sam9rl_initialize(unsigned long main_clock); -extern void __init at91sam9g45_initialize(unsigned long main_clock); +extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); -extern void __init at91cap9_initialize(unsigned long main_clock); /* Interrupts */ -extern void __init at91rm9200_init_interrupts(unsigned int priority[]); -extern void __init at91sam9260_init_interrupts(unsigned int priority[]); -extern void __init at91sam9261_init_interrupts(unsigned int priority[]); -extern void __init at91sam9263_init_interrupts(unsigned int priority[]); -extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); -extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); +extern void __init at91_init_irq_default(void); +extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91cap9_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ @@ -49,7 +33,6 @@ extern struct sys_timer at91sam926x_timer; extern struct sys_timer at91x40_timer; /* Clocks */ -extern int __init at91_clock_init(unsigned long main_clock); /* * function to specify the clock of the default console. As we do not * use the device/driver bus, the dev_name is not intialize. So we need @@ -62,6 +45,11 @@ extern void __init at91sam9263_set_console_clock(int id); extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); extern void __init at91cap9_set_console_clock(int id); +#ifdef CONFIG_AT91_PMC_UNIT +extern int __init at91_clock_init(unsigned long main_clock); +#else +static int inline at91_clock_init(unsigned long main_clock) { return 0; } +#endif struct device; /* Power Management */ diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h index 6dcaa7716871..dbfe455a4c41 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -16,22 +16,25 @@ #ifndef AT91_DBGU_H #define AT91_DBGU_H +#define dbgu_readl(dbgu, field) \ + __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field) + #ifdef AT91_DBGU -#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */ -#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */ -#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */ +#define AT91_DBGU_CR (0x00) /* Control Register */ +#define AT91_DBGU_MR (0x04) /* Mode Register */ +#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */ #define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ #define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */ -#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */ -#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */ -#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ -#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ -#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ +#define AT91_DBGU_IDR (0x0c) /* Interrupt Disable Register */ +#define AT91_DBGU_IMR (0x10) /* Interrupt Mask Register */ +#define AT91_DBGU_SR (0x14) /* Status Register */ +#define AT91_DBGU_RHR (0x18) /* Receiver Holding Register */ +#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ +#define AT91_DBGU_BRGR (0x20) /* Baud Rate Generator Register */ -#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ -#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ -#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */ +#define AT91_DBGU_CIDR (0x40) /* Chip ID Register */ +#define AT91_DBGU_EXID (0x44) /* Chip ID Extension Register */ +#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */ #define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ #endif /* AT91_DBGU */ diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h deleted file mode 100644 index fecc2e9f0ca8..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_wdt.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_wdt.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Watchdog Timer (WDT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_WDT_H -#define AT91_WDT_H - -#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */ -#define AT91_WDT_WDRSTT (1 << 0) /* Restart */ -#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */ -#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ -#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ -#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ -#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ -#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ -#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ -#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ -#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ - -#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */ -#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */ -#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 665993849a7b..c5df1e8f1955 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -75,7 +75,6 @@ #define AT91CAP9_BASE_EMAC 0xfffbc000 #define AT91CAP9_BASE_ADC 0xfffc0000 #define AT91CAP9_BASE_ISI 0xfffc4000 -#define AT91_BASE_SYS 0xffffe200 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 99e0f8d02d7b..e4037b500302 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -74,7 +74,6 @@ #define AT91RM9200_BASE_SSC1 0xfffd4000 #define AT91RM9200_BASE_SSC2 0xfffd8000 #define AT91RM9200_BASE_SPI 0xfffe0000 -#define AT91_BASE_SYS 0xfffff000 /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 8b6bf835cd73..9a791165913f 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -76,7 +76,6 @@ #define AT91SAM9260_BASE_TC4 0xfffdc040 #define AT91SAM9260_BASE_TC5 0xfffdc080 #define AT91SAM9260_BASE_ADC 0xfffe0000 -#define AT91_BASE_SYS 0xffffe800 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index eafbddaf523c..ce596204cefa 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -60,7 +60,6 @@ #define AT91SAM9261_BASE_SSC2 0xfffc4000 #define AT91SAM9261_BASE_SPI0 0xfffc8000 #define AT91SAM9261_BASE_SPI1 0xfffcc000 -#define AT91_BASE_SYS 0xffffea00 /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index e2d348213a7b..f1b92961a2b1 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -70,7 +70,6 @@ #define AT91SAM9263_BASE_EMAC 0xfffbc000 #define AT91SAM9263_BASE_ISI 0xfffc4000 #define AT91SAM9263_BASE_2DGE 0xfffc8000 -#define AT91_BASE_SYS 0xffffe000 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 659304aa73d9..2c611b9a0138 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -82,7 +82,6 @@ #define AT91SAM9G45_BASE_TC3 0xfffd4000 #define AT91SAM9G45_BASE_TC4 0xfffd4040 #define AT91SAM9G45_BASE_TC5 0xfffd4080 -#define AT91_BASE_SYS 0xffffe200 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 41dbbe61055c..1aabacd315d4 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -64,7 +64,6 @@ #define AT91SAM9RL_BASE_TSC 0xfffd0000 #define AT91SAM9RL_BASE_UDPHS 0xfffd4000 #define AT91SAM9RL_BASE_AC97C 0xfffd8000 -#define AT91_BASE_SYS 0xffffc000 /* diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/mach-at91/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index df966c2bc2d4..f6ce936dba2b 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -1,7 +1,8 @@ /* * arch/arm/mach-at91/include/mach/cpu.h * - * Copyright (C) 2006 SAN People + * Copyright (C) 2006 SAN People + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -10,12 +11,8 @@ * */ -#ifndef __ASM_ARCH_CPU_H -#define __ASM_ARCH_CPU_H - -#include <mach/hardware.h> -#include <mach/at91_dbgu.h> - +#ifndef __MACH_CPU_H__ +#define __MACH_CPU_H__ #define ARCH_ID_AT91RM9200 0x09290780 #define ARCH_ID_AT91SAM9260 0x019803a0 @@ -39,16 +36,6 @@ #define ARCH_ID_AT91M40807 0x14080745 #define ARCH_ID_AT91R40008 0x44000840 -static inline unsigned long at91_cpu_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); -} - -static inline unsigned long at91_cpu_fully_identify(void) -{ - return at91_sys_read(AT91_DBGU_CIDR); -} - #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9G46 0x00000003 @@ -60,40 +47,80 @@ static inline unsigned long at91_cpu_fully_identify(void) #define ARCH_EXID_AT91SAM9G25 0x00000003 #define ARCH_EXID_AT91SAM9X25 0x00000004 -static inline unsigned long at91_exid_identify(void) -{ - return at91_sys_read(AT91_DBGU_EXID); -} - - #define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 -static inline unsigned long at91_arch_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH); -} - -#ifdef CONFIG_ARCH_AT91CAP9 -#include <mach/at91_pmc.h> - +/* PMC revision */ #define ARCH_REVISION_CAP9_B 0x399 #define ARCH_REVISION_CAP9_C 0x601 -static inline unsigned long at91cap9_rev_identify(void) +/* RM9200 type */ +#define ARCH_REVISON_9200_BGA (0 << 0) +#define ARCH_REVISON_9200_PQFP (1 << 0) + +enum at91_soc_type { + /* 920T */ + AT91_SOC_RM9200, + + /* CAP */ + AT91_SOC_CAP9, + + /* SAM92xx */ + AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263, + + /* SAM9Gxx */ + AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45, + + /* SAM9RL */ + AT91_SOC_SAM9RL, + + /* SAM9X5 */ + AT91_SOC_SAM9X5, + + /* Unknown type */ + AT91_SOC_NONE +}; + +enum at91_soc_subtype { + /* RM9200 */ + AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP, + + /* CAP9 */ + AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C, + + /* SAM9260 */ + AT91_SOC_SAM9XE, + + /* SAM9G45 */ + AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11, + + /* SAM9X5 */ + AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35, + AT91_SOC_SAM9G25, AT91_SOC_SAM9X25, + + /* Unknown subtype */ + AT91_SOC_SUBTYPE_NONE +}; + +struct at91_socinfo { + unsigned int type, subtype; + unsigned int cidr, exid; +}; + +extern struct at91_socinfo at91_soc_initdata; +const char *at91_get_soc_type(struct at91_socinfo *c); +const char *at91_get_soc_subtype(struct at91_socinfo *c); + +static inline int at91_soc_is_detected(void) { - return (at91_sys_read(AT91_PMC_VER)); + return at91_soc_initdata.type != AT91_SOC_NONE; } -#endif #ifdef CONFIG_ARCH_AT91RM9200 -extern int rm9200_type; -#define ARCH_REVISON_9200_BGA (0 << 0) -#define ARCH_REVISON_9200_PQFP (1 << 0) -#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) -#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp()) -#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP) +#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200) +#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA) +#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP) #else #define cpu_is_at91rm9200() (0) #define cpu_is_at91rm9200_bga() (0) @@ -101,52 +128,49 @@ extern int rm9200_type; #endif #ifdef CONFIG_ARCH_AT91SAM9260 -#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE) -#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe()) +#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE) +#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260) #else #define cpu_is_at91sam9xe() (0) #define cpu_is_at91sam9260() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9G20 -#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20) +#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20) #else #define cpu_is_at91sam9g20() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9261 -#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261) +#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261) #else #define cpu_is_at91sam9261() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9G10 -#define cpu_is_at91sam9g10() ((at91_cpu_identify() & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) +#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10) #else #define cpu_is_at91sam9g10() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9263 -#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263) +#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263) #else #define cpu_is_at91sam9263() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9RL -#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64) +#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL) #else #define cpu_is_at91sam9rl() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9G45 -#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) -#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES) -#define cpu_is_at91sam9m10() (cpu_is_at91sam9g45() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9M10)) -#define cpu_is_at91sam9m46() (cpu_is_at91sam9g45() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G46)) -#define cpu_is_at91sam9m11() (cpu_is_at91sam9g45() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9M11)) +#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45) +#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES) +#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10) +#define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46) +#define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11) #else #define cpu_is_at91sam9g45() (0) #define cpu_is_at91sam9g45es() (0) @@ -156,17 +180,12 @@ extern int rm9200_type; #endif #ifdef CONFIG_ARCH_AT91SAM9X5 -#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5) -#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G15)) -#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G35)) -#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9X35)) -#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G25)) -#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9X25)) +#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5) +#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15) +#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35) +#define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35) +#define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25) +#define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25) #else #define cpu_is_at91sam9x5() (0) #define cpu_is_at91sam9g15() (0) @@ -177,9 +196,9 @@ extern int rm9200_type; #endif #ifdef CONFIG_ARCH_AT91CAP9 -#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) -#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B) -#define cpu_is_at91cap9_revC() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_C) +#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9) +#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B) +#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C) #else #define cpu_is_at91cap9() (0) #define cpu_is_at91cap9_revB() (0) @@ -192,4 +211,4 @@ extern int rm9200_type; */ #define cpu_is_at32ap7000() (0) -#endif +#endif /* __MACH_CPU_H__ */ diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index 0f959faf74a9..bc1e0b2e2f4f 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -15,23 +15,23 @@ #include <mach/at91_dbgu.h> .macro addruart, rp, rv - ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) - ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) + ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) + ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) .endm .macro senduart,rd,rx - strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register + strb \rd, [\rx, #(AT91_DBGU_THR)] @ Write to Transmitter Holding Register .endm .macro waituart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit +1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register + tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit beq 1001b .endm .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete +1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register + tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete beq 1001b .endm diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 1008b9fb5074..483478d8be6b 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -36,6 +36,20 @@ #error "Unsupported AT91 processor" #endif +#if !defined(CONFIG_ARCH_AT91X40) +/* + * On all at91 except rm9200 and x40 have the System Controller starts + * at address 0xffffc000 and has a size of 16KiB. + * + * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting + * at 0xfffff000 + * + * Removes the individual definitions of AT91_BASE_SYS and + * replaces them with a common version at base 0xfffffc000 and size 16KiB + * and map the same memory space + */ +#define AT91_BASE_SYS 0xffffc000 +#endif /* * Peripheral identifiers/interrupts. diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h index 0b0cccc46e68..4298e7806c76 100644 --- a/arch/arm/mach-at91/include/mach/io.h +++ b/arch/arm/mach-at91/include/mach/io.h @@ -21,14 +21,23 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H +#include <mach/hardware.h> + #define IO_SPACE_LIMIT 0xFFFFFFFF #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) - #ifndef __ASSEMBLY__ +#ifndef CONFIG_ARCH_AT91X40 +#define __arch_ioremap at91_ioremap +#define __arch_iounmap at91_iounmap +#endif + +void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type); +void at91_iounmap(volatile void __iomem *addr); + static inline unsigned int at91_sys_read(unsigned int reg_offset) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index ea53f4d9b283..4159eca78945 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <asm/irq.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c new file mode 100644 index 000000000000..aa64294c7db3 --- /dev/null +++ b/arch/arm/mach-at91/setup.c @@ -0,0 +1,297 @@ +/* + * Copyright (C) 2007 Atmel Corporation. + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 + */ + +#include <linux/module.h> +#include <linux/io.h> +#include <linux/mm.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/cpu.h> +#include <mach/at91_dbgu.h> +#include <mach/at91_pmc.h> + +#include "soc.h" +#include "generic.h" + +struct at91_init_soc __initdata at91_boot_soc; + +struct at91_socinfo at91_soc_initdata; +EXPORT_SYMBOL(at91_soc_initdata); + +void __init at91rm9200_set_type(int type) +{ + if (type == ARCH_REVISON_9200_PQFP) + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; + else + at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP; +} + +void __init at91_init_irq_default(void) +{ + at91_init_interrupts(at91_boot_soc.default_irq_priority); +} + +void __init at91_init_interrupts(unsigned int *priority) +{ + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} + +static struct map_desc sram_desc[2] __initdata; + +void __init at91_init_sram(int bank, unsigned long base, unsigned int length) +{ + struct map_desc *desc = &sram_desc[bank]; + + desc->virtual = AT91_IO_VIRT_BASE - length; + if (bank > 0) + desc->virtual -= sram_desc[bank - 1].length; + + desc->pfn = __phys_to_pfn(base); + desc->length = length; + desc->type = MT_DEVICE; + + pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n", + base, length, desc->virtual); + + iotable_init(desc, 1); +} + +static struct map_desc at91_io_desc __initdata = { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, +}; + +void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1)) + return (void __iomem *)AT91_IO_P2V(p); + + return __arm_ioremap_caller(p, size, type, __builtin_return_address(0)); +} +EXPORT_SYMBOL(at91_ioremap); + +void at91_iounmap(volatile void __iomem *addr) +{ + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); +} +EXPORT_SYMBOL(at91_iounmap); + +#define AT91_DBGU0 0xfffff200 +#define AT91_DBGU1 0xffffee00 + +static void __init soc_detect(u32 dbgu_base) +{ + u32 cidr, socid; + + cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); + socid = cidr & ~AT91_CIDR_VERSION; + + switch (socid) { + case ARCH_ID_AT91CAP9: { +#ifdef CONFIG_AT91_PMC_UNIT + u32 pmc_ver = at91_sys_read(AT91_PMC_VER); + + if (pmc_ver == ARCH_REVISION_CAP9_B) + at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B; + else if (pmc_ver == ARCH_REVISION_CAP9_C) + at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C; +#endif + at91_soc_initdata.type = AT91_SOC_CAP9; + at91_boot_soc = at91cap9_soc; + break; + } + + case ARCH_ID_AT91RM9200: + at91_soc_initdata.type = AT91_SOC_RM9200; + at91_boot_soc = at91rm9200_soc; + break; + + case ARCH_ID_AT91SAM9260: + at91_soc_initdata.type = AT91_SOC_SAM9260; + at91_boot_soc = at91sam9260_soc; + break; + + case ARCH_ID_AT91SAM9261: + at91_soc_initdata.type = AT91_SOC_SAM9261; + at91_boot_soc = at91sam9261_soc; + break; + + case ARCH_ID_AT91SAM9263: + at91_soc_initdata.type = AT91_SOC_SAM9263; + at91_boot_soc = at91sam9263_soc; + break; + + case ARCH_ID_AT91SAM9G20: + at91_soc_initdata.type = AT91_SOC_SAM9G20; + at91_boot_soc = at91sam9260_soc; + break; + + case ARCH_ID_AT91SAM9G45: + at91_soc_initdata.type = AT91_SOC_SAM9G45; + if (cidr == ARCH_ID_AT91SAM9G45ES) + at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES; + at91_boot_soc = at91sam9g45_soc; + break; + + case ARCH_ID_AT91SAM9RL64: + at91_soc_initdata.type = AT91_SOC_SAM9RL; + at91_boot_soc = at91sam9rl_soc; + break; + + case ARCH_ID_AT91SAM9X5: + at91_soc_initdata.type = AT91_SOC_SAM9X5; + at91_boot_soc = at91sam9x5_soc; + break; + } + + /* at91sam9g10 */ + if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + at91_soc_initdata.type = AT91_SOC_SAM9G10; + at91_boot_soc = at91sam9261_soc; + } + /* at91sam9xe */ + else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { + at91_soc_initdata.type = AT91_SOC_SAM9260; + at91_soc_initdata.subtype = AT91_SOC_SAM9XE; + at91_boot_soc = at91sam9260_soc; + } + + if (!at91_soc_is_detected()) + return; + + at91_soc_initdata.cidr = cidr; + + /* sub version of soc */ + at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + + if (at91_soc_initdata.type == AT91_SOC_SAM9G45) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_AT91SAM9M10: + at91_soc_initdata.subtype = AT91_SOC_SAM9M10; + break; + case ARCH_EXID_AT91SAM9G46: + at91_soc_initdata.subtype = AT91_SOC_SAM9G46; + break; + case ARCH_EXID_AT91SAM9M11: + at91_soc_initdata.subtype = AT91_SOC_SAM9M11; + break; + } + } + + if (at91_soc_initdata.type == AT91_SOC_SAM9X5) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_AT91SAM9G15: + at91_soc_initdata.subtype = AT91_SOC_SAM9G15; + break; + case ARCH_EXID_AT91SAM9G35: + at91_soc_initdata.subtype = AT91_SOC_SAM9G35; + break; + case ARCH_EXID_AT91SAM9X35: + at91_soc_initdata.subtype = AT91_SOC_SAM9X35; + break; + case ARCH_EXID_AT91SAM9G25: + at91_soc_initdata.subtype = AT91_SOC_SAM9G25; + break; + case ARCH_EXID_AT91SAM9X25: + at91_soc_initdata.subtype = AT91_SOC_SAM9X25; + break; + } + } +} + +static const char *soc_name[] = { + [AT91_SOC_RM9200] = "at91rm9200", + [AT91_SOC_CAP9] = "at91cap9", + [AT91_SOC_SAM9260] = "at91sam9260", + [AT91_SOC_SAM9261] = "at91sam9261", + [AT91_SOC_SAM9263] = "at91sam9263", + [AT91_SOC_SAM9G10] = "at91sam9g10", + [AT91_SOC_SAM9G20] = "at91sam9g20", + [AT91_SOC_SAM9G45] = "at91sam9g45", + [AT91_SOC_SAM9RL] = "at91sam9rl", + [AT91_SOC_SAM9X5] = "at91sam9x5", + [AT91_SOC_NONE] = "Unknown" +}; + +const char *at91_get_soc_type(struct at91_socinfo *c) +{ + return soc_name[c->type]; +} +EXPORT_SYMBOL(at91_get_soc_type); + +static const char *soc_subtype_name[] = { + [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", + [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", + [AT91_SOC_CAP9_REV_B] = "at91cap9 revB", + [AT91_SOC_CAP9_REV_C] = "at91cap9 revC", + [AT91_SOC_SAM9XE] = "at91sam9xe", + [AT91_SOC_SAM9G45ES] = "at91sam9g45es", + [AT91_SOC_SAM9M10] = "at91sam9m10", + [AT91_SOC_SAM9G46] = "at91sam9g46", + [AT91_SOC_SAM9M11] = "at91sam9m11", + [AT91_SOC_SAM9G15] = "at91sam9g15", + [AT91_SOC_SAM9G35] = "at91sam9g35", + [AT91_SOC_SAM9X35] = "at91sam9x35", + [AT91_SOC_SAM9G25] = "at91sam9g25", + [AT91_SOC_SAM9X25] = "at91sam9x25", + [AT91_SOC_SUBTYPE_NONE] = "Unknown" +}; + +const char *at91_get_soc_subtype(struct at91_socinfo *c) +{ + return soc_subtype_name[c->subtype]; +} +EXPORT_SYMBOL(at91_get_soc_subtype); + +void __init at91_map_io(void) +{ + /* Map peripherals */ + iotable_init(&at91_io_desc, 1); + + at91_soc_initdata.type = AT91_SOC_NONE; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; + + soc_detect(AT91_DBGU0); + if (!at91_soc_is_detected()) + soc_detect(AT91_DBGU1); + + if (!at91_soc_is_detected()) + panic("AT91: Impossible to detect the SOC type"); + + pr_info("AT91: Detected soc type: %s\n", + at91_get_soc_type(&at91_soc_initdata)); + pr_info("AT91: Detected soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); + + if (!at91_soc_is_enabled()) + panic("AT91: Soc not enabled"); + + if (at91_boot_soc.map_io) + at91_boot_soc.map_io(); +} + +void __init at91_initialize(unsigned long main_clock) +{ + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h new file mode 100644 index 000000000000..21ed8816e6f7 --- /dev/null +++ b/arch/arm/mach-at91/soc.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 + */ + +struct at91_init_soc { + unsigned int *default_irq_priority; + void (*map_io)(void); + void (*register_clocks)(void); + void (*init)(void); +}; + +extern struct at91_init_soc at91_boot_soc; +extern struct at91_init_soc at91cap9_soc; +extern struct at91_init_soc at91rm9200_soc; +extern struct at91_init_soc at91sam9260_soc; +extern struct at91_init_soc at91sam9261_soc; +extern struct at91_init_soc at91sam9263_soc; +extern struct at91_init_soc at91sam9g45_soc; +extern struct at91_init_soc at91sam9rl_soc; +extern struct at91_init_soc at91sam9x5_soc; + +static inline int at91_soc_is_enabled(void) +{ + return at91_boot_soc.init != NULL; +} + +#if !defined(CONFIG_ARCH_AT91CAP9) +#define at91cap9_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91RM9200) +#define at91rm9200_soc at91_boot_soc +#endif + +#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)) +#define at91sam9260_soc at91_boot_soc +#endif + +#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)) +#define at91sam9261_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9263) +#define at91sam9263_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9G45) +#define at91sam9g45_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9RL) +#define at91sam9rl_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9X5) +#define at91sam9x5_soc at91_boot_soc +#endif |