diff options
Diffstat (limited to 'Documentation')
27 files changed, 1084 insertions, 165 deletions
diff --git a/Documentation/ABI/testing/configfs-stp-policy b/Documentation/ABI/testing/configfs-stp-policy new file mode 100644 index 000000000000..421ce6825c66 --- /dev/null +++ b/Documentation/ABI/testing/configfs-stp-policy @@ -0,0 +1,48 @@ +What: /config/stp-policy +Date: June 2015 +KernelVersion: 4.3 +Description: + This group contains policies mandating Master/Channel allocation + for software sources wishing to send trace data over an STM + device. + +What: /config/stp-policy/<device>.<policy> +Date: June 2015 +KernelVersion: 4.3 +Description: + This group is the root of a policy; its name is a concatenation + of an stm device name to which this policy applies and an + arbitrary string. If <device> part doesn't match an existing + stm device, mkdir will fail with ENODEV; if that device already + has a policy assigned to it, mkdir will fail with EBUSY. + +What: /config/stp-policy/<device>.<policy>/device +Date: June 2015 +KernelVersion: 4.3 +Description: + STM device to which this policy applies, read only. Same as the + <device> component of its parent directory. + +What: /config/stp-policy/<device>.<policy>/<node> +Date: June 2015 +KernelVersion: 4.3 +Description: + Policy node is a string identifier that software clients will + use to request a master/channel to be allocated and assigned to + them. + +What: /config/stp-policy/<device>.<policy>/<node>/masters +Date: June 2015 +KernelVersion: 4.3 +Description: + Range of masters from which to allocate for users of this node. + Write two numbers: the first master and the last master number. + +What: /config/stp-policy/<device>.<policy>/<node>/channels +Date: June 2015 +KernelVersion: 4.3 +Description: + Range of channels from which to allocate for users of this node. + Write two numbers: the first channel and the last channel + number. + diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x index d72ca1736ba4..924265a1295d 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x @@ -8,13 +8,6 @@ Description: (RW) Enable/disable tracing on this specific trace entiry. of coresight components linking the source to the sink is configured and managed automatically by the coresight framework. -What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/status -Date: November 2014 -KernelVersion: 3.19 -Contact: Mathieu Poirier <mathieu.poirier@linaro.org> -Description: (R) List various control and status registers. The specific - layout and content is driver specific. - What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_idx Date: November 2014 KernelVersion: 3.19 @@ -251,3 +244,79 @@ Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (RW) Define the event that controls the trigger. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/cpu +Date: October 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Holds the cpu number this tracer is affined to. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmccr +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM Configuration Code register + (0x004). The value is read directly from the HW. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmccer +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM Configuration Code Extension + register (0x1e8). The value is read directly from the HW. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmscr +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM System Configuration + register (0x014). The value is read directly from the HW. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmidr +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM ID register (0x1e4). The + value is read directly from the HW. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmcr +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM Main Control register (0x000). + The value is read directly from the HW. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtraceidr +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM Trace ID register (0x200). + The value is read directly from the HW. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmteevr +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM Trace Enable Event register + (0x020). The value is read directly from the HW. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtsscr +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM Trace Start/Stop Conrol + register (0x018). The value is read directly from the HW. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr1 +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM Enable Conrol #1 + register (0x024). The value is read directly from the HW. + +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr2 +Date: September 2015 +KernelVersion: 4.4 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> +Description: (RO) Print the content of the ETM Enable Conrol #2 + register (0x01c). The value is read directly from the HW. diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth new file mode 100644 index 000000000000..22d0843849a8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth @@ -0,0 +1,49 @@ +What: /sys/bus/intel_th/devices/<intel_th_id>-gth/masters/* +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Configure output ports for STP masters. Writing -1 + disables a master; any + +What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_port +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RO) Output port type: + 0: not present, + 1: MSU (Memory Storage Unit) + 2: CTP (Common Trace Port) + 4: PTI (MIPI PTI). + +What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_drop +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Data retention policy setting: keep (0) or drop (1) + incoming data while output port is in reset. + +What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_null +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) STP NULL packet generation: enabled (1) or disabled (0). + +What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_flush +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Force flush data from byte packing buffer for the output + port. + +What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_reset +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RO) Output port is in reset (1). + +What: /sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_smcfreq +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) STP sync packet frequency for the port. Specifies the + number of clocks between mainenance packets. diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc new file mode 100644 index 000000000000..b940c5d91cf7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc @@ -0,0 +1,33 @@ +What: /sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/wrap +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Configure MSC buffer wrapping. 1 == wrapping enabled. + +What: /sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/mode +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Configure MSC operating mode: + - "single", for contiguous buffer mode (high-order alloc); + - "multi", for multiblock mode; + - "ExI", for DCI handler mode; + - "debug", for debug mode. + If operating mode changes, existing buffer is deallocated, + provided there are no active users and tracing is not enabled, + otherwise the write will fail. + +What: /sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/nr_pages +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Configure MSC buffer size for "single" or "multi" modes. + In single mode, this is a single number of pages, has to be + power of 2. In multiblock mode, this is a comma-separated list + of numbers of pages for each window to be allocated. Number of + windows is not limited. + Writing to this file deallocates existing buffer (provided + there are no active users and tracing is not enabled) and then + allocates a new one. + + diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti new file mode 100644 index 000000000000..df0b24fd0218 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti @@ -0,0 +1,24 @@ +What: /sys/bus/intel_th/devices/<intel_th_id>-pti/mode +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Configure PTI output width. Currently supported values + are 4, 8, 12, 16. + +What: /sys/bus/intel_th/devices/<intel_th_id>-pti/freerunning_clock +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) 0: PTI trace clock acts as a strobe which only toggles + when there is trace data to send. 1: PTI trace clock is a + free-running clock. + +What: /sys/bus/intel_th/devices/<intel_th_id>-pti/clock_divider +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Configure PTI port clock divider: + - 0: Intel TH clock rate, + - 1: 1/2 Intel TH clock rate, + - 2: 1/4 Intel TH clock rate, + - 3: 1/8 Intel TH clock rate. diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices b/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices new file mode 100644 index 000000000000..4d48a9451866 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices @@ -0,0 +1,13 @@ +What: /sys/bus/intel_th/devices/<intel_th_id>-<device><id>/active +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Writes of 1 or 0 enable or disable trace output to this + output device. Reads return current status. + +What: /sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/port +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RO) Port number, corresponding to this output device on the + switch (GTH). diff --git a/Documentation/ABI/testing/sysfs-bus-mei b/Documentation/ABI/testing/sysfs-bus-mei index 20e4d1638bac..6bd45346ac7e 100644 --- a/Documentation/ABI/testing/sysfs-bus-mei +++ b/Documentation/ABI/testing/sysfs-bus-mei @@ -19,3 +19,10 @@ KernelVersion: 4.2 Contact: Tomas Winkler <tomas.winkler@intel.com> Description: Stores mei client device uuid Format: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx + +What: /sys/bus/mei/devices/.../version +Date: Aug 2015 +KernelVersion: 4.3 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Stores mei client protocol version + Format: %d diff --git a/Documentation/ABI/testing/sysfs-class-fpga-manager b/Documentation/ABI/testing/sysfs-class-fpga-manager new file mode 100644 index 000000000000..23056c532fdd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-fpga-manager @@ -0,0 +1,37 @@ +What: /sys/class/fpga_manager/<fpga>/name +Date: August 2015 +KernelVersion: 4.3 +Contact: Alan Tull <atull@opensource.altera.com> +Description: Name of low level fpga manager driver. + +What: /sys/class/fpga_manager/<fpga>/state +Date: August 2015 +KernelVersion: 4.3 +Contact: Alan Tull <atull@opensource.altera.com> +Description: Read fpga manager state as a string. + The intent is to provide enough detail that if something goes + wrong during FPGA programming (something that the driver can't + fix) then userspace can know, i.e. if the firmware request + fails, that could be due to not being able to find the firmware + file. + + This is a superset of FPGA states and fpga manager driver + states. The fpga manager driver is walking through these steps + to get the FPGA into a known operating state. It's a sequence, + though some steps may get skipped. Valid FPGA states will vary + by manufacturer; this is a superset. + + * unknown = can't determine state + * power off = FPGA power is off + * power up = FPGA reports power is up + * reset = FPGA held in reset state + * firmware request = firmware class request in progress + * firmware request error = firmware request failed + * write init = preparing FPGA for programming + * write init error = Error while preparing FPGA for + programming + * write = FPGA ready to receive image data + * write error = Error while programming + * write complete = Doing post programming steps + * write complete error = Error while doing post programming + * operating = FPGA is programmed and operating diff --git a/Documentation/ABI/testing/sysfs-class-mic.txt b/Documentation/ABI/testing/sysfs-class-mic.txt index 13f48afc534f..d45eed2bf128 100644 --- a/Documentation/ABI/testing/sysfs-class-mic.txt +++ b/Documentation/ABI/testing/sysfs-class-mic.txt @@ -41,18 +41,15 @@ Description: When read, this entry provides the current state of an Intel MIC device in the context of the card OS. Possible values that will be read are: - "offline" - The MIC device is ready to boot the card OS. On + "ready" - The MIC device is ready to boot the card OS. On reading this entry after an OSPM resume, a "boot" has to be written to this entry if the card was previously shutdown during OSPM suspend. - "online" - The MIC device has initiated booting a card OS. + "booting" - The MIC device has initiated booting a card OS. + "online" - The MIC device has completed boot and is online "shutting_down" - The card OS is shutting down. + "resetting" - A reset has been initiated for the MIC device "reset_failed" - The MIC device has failed to reset. - "suspending" - The MIC device is currently being prepared for - suspend. On reading this entry, a "suspend" has to be written - to the state sysfs entry to ensure the card is shutdown during - OSPM suspend. - "suspended" - The MIC device has been suspended. When written, this sysfs entry triggers different state change operations depending upon the current state of the card OS. @@ -62,8 +59,6 @@ Description: sysfs entries. "reset" - Initiates device reset. "shutdown" - Initiates card OS shutdown. - "suspend" - Initiates card OS shutdown and also marks the card - as suspended. What: /sys/class/mic/mic(x)/shutdown_status Date: October 2013 @@ -126,7 +121,7 @@ Description: the card. This sysfs entry can be written with the following valid strings: a) linux - Boot a Linux image. - b) elf - Boot an elf image for flash updates. + b) flash - Boot an image for flash updates. What: /sys/class/mic/mic(x)/log_buf_addr Date: October 2013 @@ -155,3 +150,17 @@ Description: daemon to set the log buffer length address. The correct log buffer length address to be written can be found in the System.map file of the card OS. + +What: /sys/class/mic/mic(x)/heartbeat_enable +Date: March 2015 +KernelVersion: 3.20 +Contact: Ashutosh Dixit <ashutosh.dixit@intel.com> +Description: + The MIC drivers detect and inform user space about card crashes + via a heartbeat mechanism (see the description of + shutdown_status above). User space can turn off this + notification by setting heartbeat_enable to 0 and enable it by + setting this entry to 1. If this notification is disabled it is + the responsibility of user space to detect card crashes via + alternative means such as a network ping. This setting is + enabled by default. diff --git a/Documentation/ABI/testing/sysfs-class-stm b/Documentation/ABI/testing/sysfs-class-stm new file mode 100644 index 000000000000..c9aa4f3fc9a7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-stm @@ -0,0 +1,14 @@ +What: /sys/class/stm/<stm>/masters +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: + Shows first and last available to software master numbers on + this STM device. + +What: /sys/class/stm/<stm>/channels +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: + Shows the number of channels per master on this STM device. diff --git a/Documentation/ABI/testing/sysfs-class-stm_source b/Documentation/ABI/testing/sysfs-class-stm_source new file mode 100644 index 000000000000..57b8dd39bbf7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-stm_source @@ -0,0 +1,11 @@ +What: /sys/class/stm_source/<stm_source>/stm_source_link +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: + stm_source device linkage to stm device, where its tracing data + is directed. Reads return an existing connection or "<none>" if + this stm_source is not connected to any stm device yet. + Write an existing (registered) stm device's name here to + connect that device. If a device is already connected to this + stm_source, it will first be disconnected. diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt new file mode 100644 index 000000000000..7018aa896835 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt @@ -0,0 +1,19 @@ +Xilinx Zynq FPGA Manager + +Required properties: +- compatible: should contain "xlnx,zynq-devcfg-1.0" +- reg: base address and size for memory mapped io +- interrupts: interrupt for the FPGA manager device +- clocks: phandle for clocks required operation +- clock-names: name for the clock, should be "ref_clk" +- syscon: phandle for access to SLCR registers + +Example: + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + interrupts = <0 8 4>; + clocks = <&clkc 12>; + clock-names = "ref_clk"; + syscon = <&slcr>; + }; diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt index 36cbe5aea990..42ee9438b771 100644 --- a/Documentation/devicetree/bindings/misc/sram.txt +++ b/Documentation/devicetree/bindings/misc/sram.txt @@ -33,6 +33,12 @@ Optional properties in the area nodes: - compatible : standard definition, should contain a vendor specific string in the form <vendor>,[<device>-]<usage> +- pool : indicates that the particular reserved SRAM area is addressable + and in use by another device or devices +- export : indicates that the reserved SRAM area may be accessed outside + of the kernel, e.g. by bootloader or userspace +- label : the name for the reserved partition, if omitted, the label + is taken from the node name excluding the unit address. Example: @@ -48,4 +54,14 @@ sram: sram@5c000000 { compatible = "socvendor,smp-sram"; reg = <0x100 0x50>; }; + + device-sram@1000 { + reg = <0x1000 0x1000>; + pool; + }; + + exported@20000 { + reg = <0x20000 0x20000>; + export; + }; }; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt new file mode 100644 index 000000000000..383d5889e95a --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -0,0 +1,20 @@ +Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings + +This binding represents the on-chip eFuse OTP controller found on +i.MX6Q/D, i.MX6DL/S, i.MX6SL, and i.MX6SX SoCs. + +Required properties: +- compatible: should be one of + "fsl,imx6q-ocotp" (i.MX6Q/D/DL/S), + "fsl,imx6sl-ocotp" (i.MX6SL), or + "fsl,imx6sx-ocotp" (i.MX6SX), followed by "syscon". +- reg: Should contain the register base and length. +- clocks: Should contain a phandle pointing to the gated peripheral clock. + +Example: + + ocotp: ocotp@021bc000 { + compatible = "fsl,imx6q-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6QDL_CLK_IIM>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt new file mode 100644 index 000000000000..daebce9e6b07 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt @@ -0,0 +1,25 @@ +On-Chip OTP Memory for Freescale i.MX23/i.MX28 + +Required properties : +- compatible : + - "fsl,imx23-ocotp" for i.MX23 + - "fsl,imx28-ocotp" for i.MX28 +- #address-cells : Should be 1 +- #size-cells : Should be 1 +- reg : Address and length of OTP controller registers +- clocks : Should contain a reference to the hbus clock + += Data cells = +Are child nodes of mxs-ocotp, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example for i.MX28: + + ocotp: ocotp@8002c000 { + compatible = "fsl,imx28-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8002c000 0x2000>; + clocks = <&clks 25>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt new file mode 100644 index 000000000000..8f86ab3b1046 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -0,0 +1,38 @@ += Rockchip eFuse device tree bindings = + +Required properties: +- compatible: Should be "rockchip,rockchip-efuse" +- reg: Should contain the registers location and exact eFuse size +- clocks: Should be the clock id of eFuse +- clock-names: Should be "pclk_efuse" + += Data cells = +Are child nodes of eFuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + efuse: efuse@ffb40000 { + compatible = "rockchip,rockchip-efuse"; + reg = <0xffb40000 0x20>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE256>; + clock-names = "pclk_efuse"; + + /* Data cells */ + cpu_leakage: cpu_leakage { + reg = <0x17 0x1>; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +Example: + + cpu_leakage { + ... + nvmem-cells = <&cpu_leakage>; + nvmem-cell-names = "cpu_leakage"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt new file mode 100644 index 000000000000..56ed481c3e26 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt @@ -0,0 +1,19 @@ +On-Chip OTP Memory for Freescale Vybrid + +Required Properties: + compatible: + - "fsl,vf610-ocotp" for VF5xx/VF6xx + #address-cells : Should be 1 + #size-cells : Should be 1 + reg : Address and length of OTP controller and fuse map registers + clocks : ipg clock we associate with the OCOTP peripheral + +Example for Vybrid VF5xx/VF6xx: + + ocotp: ocotp@400a5000 { + compatible = "fsl,vf610-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x400a5000 0xCF0>; + clocks = <&clks VF610_CLK_OCOTP>; + }; diff --git a/Documentation/devicetree/bindings/w1/omap-hdq.txt b/Documentation/devicetree/bindings/w1/omap-hdq.txt index fef794741bd1..913c5f91a0f9 100644 --- a/Documentation/devicetree/bindings/w1/omap-hdq.txt +++ b/Documentation/devicetree/bindings/w1/omap-hdq.txt @@ -1,11 +1,15 @@ * OMAP HDQ One wire bus master controller Required properties: -- compatible : should be "ti,omap3-1w" +- compatible : should be "ti,omap3-1w" or "ti,am4372-hdq" - reg : Address and length of the register set for the device - interrupts : interrupt line. - ti,hwmods : "hdq1w" +Optional properties: +- ti,mode: should be "hdq": HDQ mode "1w": one-wire mode. + If not specified HDQ mode is implied. + Example: - From omap3.dtsi @@ -14,4 +18,5 @@ Example: reg = <0x480b2000 0x1000>; interrupts = <58>; ti,hwmods = "hdq1w"; + ti,mode = "hdq"; }; diff --git a/Documentation/fpga/fpga-mgr.txt b/Documentation/fpga/fpga-mgr.txt new file mode 100644 index 000000000000..ce3e84fa9023 --- /dev/null +++ b/Documentation/fpga/fpga-mgr.txt @@ -0,0 +1,171 @@ +FPGA Manager Core + +Alan Tull 2015 + +Overview +======== + +The FPGA manager core exports a set of functions for programming an FPGA with +an image. The API is manufacturer agnostic. All manufacturer specifics are +hidden away in a low level driver which registers a set of ops with the core. +The FPGA image data itself is very manufacturer specific, but for our purposes +it's just binary data. The FPGA manager core won't parse it. + + +API Functions: +============== + +To program the FPGA from a file or from a buffer: +------------------------------------------------- + + int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, + const char *buf, size_t count); + +Load the FPGA from an image which exists as a buffer in memory. + + int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags, + const char *image_name); + +Load the FPGA from an image which exists as a file. The image file must be on +the firmware search path (see the firmware class documentation). + +For both these functions, flags == 0 for normal full reconfiguration or +FPGA_MGR_PARTIAL_RECONFIG for partial reconfiguration. If successful, the FPGA +ends up in operating mode. Return 0 on success or a negative error code. + + +To get/put a reference to a FPGA manager: +----------------------------------------- + + struct fpga_manager *of_fpga_mgr_get(struct device_node *node); + + void fpga_mgr_put(struct fpga_manager *mgr); + +Given a DT node, get an exclusive reference to a FPGA manager or release +the reference. + + +To register or unregister the low level FPGA-specific driver: +------------------------------------------------------------- + + int fpga_mgr_register(struct device *dev, const char *name, + const struct fpga_manager_ops *mops, + void *priv); + + void fpga_mgr_unregister(struct device *dev); + +Use of these two functions is described below in "How To Support a new FPGA +device." + + +How to write an image buffer to a supported FPGA +================================================ +/* Include to get the API */ +#include <linux/fpga/fpga-mgr.h> + +/* device node that specifies the FPGA manager to use */ +struct device_node *mgr_node = ... + +/* FPGA image is in this buffer. count is size of the buffer. */ +char *buf = ... +int count = ... + +/* flags indicates whether to do full or partial reconfiguration */ +int flags = 0; + +int ret; + +/* Get exclusive control of FPGA manager */ +struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node); + +/* Load the buffer to the FPGA */ +ret = fpga_mgr_buf_load(mgr, flags, buf, count); + +/* Release the FPGA manager */ +fpga_mgr_put(mgr); + + +How to write an image file to a supported FPGA +============================================== +/* Include to get the API */ +#include <linux/fpga/fpga-mgr.h> + +/* device node that specifies the FPGA manager to use */ +struct device_node *mgr_node = ... + +/* FPGA image is in this file which is in the firmware search path */ +const char *path = "fpga-image-9.rbf" + +/* flags indicates whether to do full or partial reconfiguration */ +int flags = 0; + +int ret; + +/* Get exclusive control of FPGA manager */ +struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node); + +/* Get the firmware image (path) and load it to the FPGA */ +ret = fpga_mgr_firmware_load(mgr, flags, path); + +/* Release the FPGA manager */ +fpga_mgr_put(mgr); + + +How to support a new FPGA device +================================ +To add another FPGA manager, write a driver that implements a set of ops. The +probe function calls fpga_mgr_register(), such as: + +static const struct fpga_manager_ops socfpga_fpga_ops = { + .write_init = socfpga_fpga_ops_configure_init, + .write = socfpga_fpga_ops_configure_write, + .write_complete = socfpga_fpga_ops_configure_complete, + .state = socfpga_fpga_ops_state, +}; + +static int socfpga_fpga_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct socfpga_fpga_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* ... do ioremaps, get interrupts, etc. and save + them in priv... */ + + return fpga_mgr_register(dev, "Altera SOCFPGA FPGA Manager", + &socfpga_fpga_ops, priv); +} + +static int socfpga_fpga_remove(struct platform_device *pdev) +{ + fpga_mgr_unregister(&pdev->dev); + + return 0; +} + + +The ops will implement whatever device specific register writes are needed to +do the programming sequence for this particular FPGA. These ops return 0 for +success or negative error codes otherwise. + +The programming sequence is: + 1. .write_init + 2. .write (may be called once or multiple times) + 3. .write_complete + +The .write_init function will prepare the FPGA to receive the image data. + +The .write function writes a buffer to the FPGA. The buffer may be contain the +whole FPGA image or may be a smaller chunk of an FPGA image. In the latter +case, this function is called multiple times for successive chunks. + +The .write_complete function is called after all the image has been written +to put the FPGA into operating mode. + +The ops include a .state function which will read the hardware FPGA manager and +return a code of type enum fpga_mgr_states. It doesn't result in a change in +hardware state. diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 8a44d44cf901..91261a32a573 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -81,6 +81,9 @@ Code Seq#(hex) Include File Comments 0x22 all scsi/sg.h '#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem '$' 00-0F linux/perf_counter.h, linux/perf_event.h +'%' 00-0F include/uapi/linux/stm.h + System Trace Module subsystem + <mailto:alexander.shishkin@linux.intel.com> '&' 00-07 drivers/firewire/nosy-user.h '1' 00-1F <linux/timepps.h> PPS kit from Ulrich Windl <ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/> diff --git a/Documentation/mic/mic_overview.txt b/Documentation/mic/mic_overview.txt index 1a2f2c8ec59e..73f44fc3e715 100644 --- a/Documentation/mic/mic_overview.txt +++ b/Documentation/mic/mic_overview.txt @@ -28,6 +28,10 @@ The Symmetric Communication Interface (SCIF (pronounced as skiff)) is a low level communications API across PCIe currently implemented for MIC. More details are available at scif_overview.txt. +The Coprocessor State Management (COSM) driver on the host allows for +boot, shutdown and reset of Intel MIC devices. It communicates with a COSM +"client" driver on the MIC cards over SCIF to perform these functions. + Here is a block diagram of the various components described above. The virtio backends are situated on the host rather than the card given better single threaded performance for the host compared to MIC, the ability of @@ -51,19 +55,20 @@ the fact that the virtio block storage backend can only be on the host. | | | Virtio over PCIe IOCTLs | | | +--------------------------+ +-----------+ | | | +-----------+ -| MIC DMA | | +----------+ | +-----------+ | | MIC DMA | -| Driver | | | SCIF | | | SCIF | | | Driver | -+-----------+ | +----------+ | +-----------+ | +-----------+ - | | | | | | | -+---------------+ | +-----+-----+ | +-----+-----+ | +---------------+ -|MIC virtual Bus| | |SCIF HW Bus| | |SCIF HW BUS| | |MIC virtual Bus| -+---------------+ | +-----------+ | +-----+-----+ | +---------------+ - | | | | | | | - | +--------------+ | | | +---------------+ | - | |Intel MIC | | | | |Intel MIC | | - +---|Card Driver +----+ | | |Host Driver | | - +--------------+ | +----+---------------+-----+ - | | | +| MIC DMA | | +------+ | +------+ +------+ | | MIC DMA | +| Driver | | | SCIF | | | SCIF | | COSM | | | Driver | ++-----------+ | +------+ | +------+ +--+---+ | +-----------+ + | | | | | | | | ++---------------+ | +------+ | +--+---+ +--+---+ | +----------------+ +|MIC virtual Bus| | |SCIF | | |SCIF | | COSM | | |MIC virtual Bus | ++---------------+ | |HW Bus| | |HW Bus| | Bus | | +----------------+ + | | +------+ | +--+---+ +------+ | | + | | | | | | | | + | +-----------+---+ | | | +---------------+ | + | |Intel MIC | | | | |Intel MIC | | + +---|Card Driver | | | | |Host Driver | | + +------------+--------+ | +----+---------------+-----+ + | | | +-------------------------------------------------------------+ | | | PCIe Bus | diff --git a/Documentation/mic/mpssd/mpss b/Documentation/mic/mpssd/mpss index 582aad4811ae..09ea90931649 100755 --- a/Documentation/mic/mpssd/mpss +++ b/Documentation/mic/mpssd/mpss @@ -119,10 +119,10 @@ stop() # Wait for the cards to go offline for f in $sysfs/* do - while [ "`cat $f/state`" != "offline" ] + while [ "`cat $f/state`" != "ready" ] do sleep 1 - echo -e "Waiting for "`basename $f`" to go offline" + echo -e "Waiting for "`basename $f`" to become ready" done done diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c index 3c5c379fc29d..aaeafa18d99b 100644 --- a/Documentation/mic/mpssd/mpssd.c +++ b/Documentation/mic/mpssd/mpssd.c @@ -43,7 +43,7 @@ #include <linux/mic_common.h> #include <tools/endian.h> -static void init_mic(struct mic_info *mic); +static void *init_mic(void *arg); static FILE *logfp; static struct mic_info mic_list; @@ -116,19 +116,18 @@ static struct { .num = htole16(MIC_VRING_ENTRIES), }, #if GSO_ENABLED - .host_features = htole32( + .host_features = htole32( 1 << VIRTIO_NET_F_CSUM | 1 << VIRTIO_NET_F_GSO | 1 << VIRTIO_NET_F_GUEST_TSO4 | 1 << VIRTIO_NET_F_GUEST_TSO6 | - 1 << VIRTIO_NET_F_GUEST_ECN | - 1 << VIRTIO_NET_F_GUEST_UFO), + 1 << VIRTIO_NET_F_GUEST_ECN), #else .host_features = 0, #endif }; -static const char *mic_config_dir = "/etc/sysconfig/mic"; +static const char *mic_config_dir = "/etc/mpss"; static const char *virtblk_backend = "VIRTBLK_BACKEND"; static struct { struct mic_device_desc dd; @@ -192,7 +191,7 @@ tap_configure(struct mic_info *mic, char *dev) return ret; } - snprintf(ipaddr, IFNAMSIZ, "172.31.%d.254/24", mic->id); + snprintf(ipaddr, IFNAMSIZ, "172.31.%d.254/24", mic->id + 1); pid = fork(); if (pid == 0) { @@ -255,8 +254,7 @@ static int tun_alloc(struct mic_info *mic, char *dev) return err; } #if GSO_ENABLED - offload = TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 | - TUN_F_TSO_ECN | TUN_F_UFO; + offload = TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 | TUN_F_TSO_ECN; err = ioctl(fd, TUNSETOFFLOAD, offload); if (err < 0) { @@ -332,7 +330,6 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type) return d; } mpsslog("%s %s %d not found\n", mic->name, __func__, type); - assert(0); return NULL; } @@ -415,6 +412,13 @@ mic_virtio_copy(struct mic_info *mic, int fd, return ret; } +static inline unsigned _vring_size(unsigned int num, unsigned long align) +{ + return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num) + + align - 1) & ~(align - 1)) + + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; +} + /* * This initialization routine requires at least one * vring i.e. vr0. vr1 is optional. @@ -426,8 +430,9 @@ init_vr(struct mic_info *mic, int fd, int type, int vr_size; char *va; - vr_size = PAGE_ALIGN(vring_size(MIC_VRING_ENTRIES, - MIC_VIRTIO_RING_ALIGN) + sizeof(struct _mic_vring_info)); + vr_size = PAGE_ALIGN(_vring_size(MIC_VRING_ENTRIES, + MIC_VIRTIO_RING_ALIGN) + + sizeof(struct _mic_vring_info)); va = mmap(NULL, MIC_DEVICE_PAGE_END + vr_size * num_vq, PROT_READ, MAP_SHARED, fd, 0); if (MAP_FAILED == va) { @@ -439,25 +444,25 @@ init_vr(struct mic_info *mic, int fd, int type, set_dp(mic, type, va); vr0->va = (struct mic_vring *)&va[MIC_DEVICE_PAGE_END]; vr0->info = vr0->va + - vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN); + _vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN); vring_init(&vr0->vr, MIC_VRING_ENTRIES, vr0->va, MIC_VIRTIO_RING_ALIGN); mpsslog("%s %s vr0 %p vr0->info %p vr_size 0x%x vring 0x%x ", __func__, mic->name, vr0->va, vr0->info, vr_size, - vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); + _vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", le32toh(vr0->info->magic), MIC_MAGIC + type); assert(le32toh(vr0->info->magic) == MIC_MAGIC + type); if (vr1) { vr1->va = (struct mic_vring *) &va[MIC_DEVICE_PAGE_END + vr_size]; - vr1->info = vr1->va + vring_size(MIC_VRING_ENTRIES, + vr1->info = vr1->va + _vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN); vring_init(&vr1->vr, MIC_VRING_ENTRIES, vr1->va, MIC_VIRTIO_RING_ALIGN); mpsslog("%s %s vr1 %p vr1->info %p vr_size 0x%x vring 0x%x ", __func__, mic->name, vr1->va, vr1->info, vr_size, - vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); + _vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN)); mpsslog("magic 0x%x expected 0x%x\n", le32toh(vr1->info->magic), MIC_MAGIC + type + 1); assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1); @@ -466,16 +471,21 @@ done: return va; } -static void +static int wait_for_card_driver(struct mic_info *mic, int fd, int type) { struct pollfd pollfd; int err; struct mic_device_desc *desc = get_device_desc(mic, type); + __u8 prev_status; + if (!desc) + return -ENODEV; + prev_status = desc->status; pollfd.fd = fd; mpsslog("%s %s Waiting .... desc-> type %d status 0x%x\n", mic->name, __func__, type, desc->status); + while (1) { pollfd.events = POLLIN; pollfd.revents = 0; @@ -487,8 +497,13 @@ wait_for_card_driver(struct mic_info *mic, int fd, int type) } if (pollfd.revents) { - mpsslog("%s %s Waiting... desc-> type %d status 0x%x\n", - mic->name, __func__, type, desc->status); + if (desc->status != prev_status) { + mpsslog("%s %s Waiting... desc-> type %d " + "status 0x%x\n", + mic->name, __func__, type, + desc->status); + prev_status = desc->status; + } if (desc->status & VIRTIO_CONFIG_S_DRIVER_OK) { mpsslog("%s %s poll.revents %d\n", mic->name, __func__, pollfd.revents); @@ -499,6 +514,7 @@ wait_for_card_driver(struct mic_info *mic, int fd, int type) } } } + return 0; } /* Spin till we have some descriptors */ @@ -575,9 +591,16 @@ virtio_net(void *arg) __func__, strerror(errno)); continue; } - if (!(desc->status & VIRTIO_CONFIG_S_DRIVER_OK)) - wait_for_card_driver(mic, mic->mic_net.virtio_net_fd, - VIRTIO_ID_NET); + if (!(desc->status & VIRTIO_CONFIG_S_DRIVER_OK)) { + err = wait_for_card_driver(mic, + mic->mic_net.virtio_net_fd, + VIRTIO_ID_NET); + if (err) { + mpsslog("%s %s %d Exiting...\n", + mic->name, __func__, __LINE__); + break; + } + } /* * Check if there is data to be read from TUN and write to * virtio net fd if there is. @@ -786,10 +809,16 @@ virtio_console(void *arg) strerror(errno)); continue; } - if (!(desc->status & VIRTIO_CONFIG_S_DRIVER_OK)) - wait_for_card_driver(mic, - mic->mic_console.virtio_console_fd, - VIRTIO_ID_CONSOLE); + if (!(desc->status & VIRTIO_CONFIG_S_DRIVER_OK)) { + err = wait_for_card_driver(mic, + mic->mic_console.virtio_console_fd, + VIRTIO_ID_CONSOLE); + if (err) { + mpsslog("%s %s %d Exiting...\n", + mic->name, __func__, __LINE__); + break; + } + } if (console_poll[MONITOR_FD].revents & POLLIN) { copy.iov = iov0; @@ -1048,8 +1077,9 @@ stop_virtblk(struct mic_info *mic) { int vr_size, ret; - vr_size = PAGE_ALIGN(vring_size(MIC_VRING_ENTRIES, - MIC_VIRTIO_RING_ALIGN) + sizeof(struct _mic_vring_info)); + vr_size = PAGE_ALIGN(_vring_size(MIC_VRING_ENTRIES, + MIC_VIRTIO_RING_ALIGN) + + sizeof(struct _mic_vring_info)); ret = munmap(mic->mic_virtblk.block_dp, MIC_DEVICE_PAGE_END + vr_size * virtblk_dev_page.dd.num_vq); if (ret < 0) @@ -1131,6 +1161,10 @@ write_status(int fd, __u8 *status) return ioctl(fd, MIC_VIRTIO_COPY_DESC, ©); } +#ifndef VIRTIO_BLK_T_GET_ID +#define VIRTIO_BLK_T_GET_ID 8 +#endif + static void * virtio_block(void *arg) { @@ -1297,12 +1331,7 @@ reset(struct mic_info *mic) mpsslog("%s: %s %d state %s\n", mic->name, __func__, __LINE__, state); - /* - * If the shutdown was initiated by OSPM, the state stays - * in "suspended" which is also a valid condition for reset. - */ - if ((!strcmp(state, "offline")) || - (!strcmp(state, "suspended"))) { + if (!strcmp(state, "ready")) { free(state); break; } @@ -1331,34 +1360,50 @@ get_mic_shutdown_status(struct mic_info *mic, char *shutdown_status) assert(0); }; -static int get_mic_state(struct mic_info *mic, char *state) +static int get_mic_state(struct mic_info *mic) { - if (!strcmp(state, "offline")) - return MIC_OFFLINE; - if (!strcmp(state, "online")) - return MIC_ONLINE; - if (!strcmp(state, "shutting_down")) - return MIC_SHUTTING_DOWN; - if (!strcmp(state, "reset_failed")) - return MIC_RESET_FAILED; - if (!strcmp(state, "suspending")) - return MIC_SUSPENDING; - if (!strcmp(state, "suspended")) - return MIC_SUSPENDED; - mpsslog("%s: BUG invalid state %s\n", mic->name, state); - /* Invalid state */ - assert(0); + char *state = NULL; + enum mic_states mic_state; + + while (!state) { + state = readsysfs(mic->name, "state"); + sleep(1); + } + mpsslog("%s: %s %d state %s\n", + mic->name, __func__, __LINE__, state); + + if (!strcmp(state, "ready")) { + mic_state = MIC_READY; + } else if (!strcmp(state, "booting")) { + mic_state = MIC_BOOTING; + } else if (!strcmp(state, "online")) { + mic_state = MIC_ONLINE; + } else if (!strcmp(state, "shutting_down")) { + mic_state = MIC_SHUTTING_DOWN; + } else if (!strcmp(state, "reset_failed")) { + mic_state = MIC_RESET_FAILED; + } else if (!strcmp(state, "resetting")) { + mic_state = MIC_RESETTING; + } else { + mpsslog("%s: BUG invalid state %s\n", mic->name, state); + assert(0); + } + + free(state); + return mic_state; }; static void mic_handle_shutdown(struct mic_info *mic) { #define SHUTDOWN_TIMEOUT 60 - int i = SHUTDOWN_TIMEOUT, ret, stat = 0; + int i = SHUTDOWN_TIMEOUT; char *shutdown_status; while (i) { shutdown_status = readsysfs(mic->name, "shutdown_status"); - if (!shutdown_status) + if (!shutdown_status) { + sleep(1); continue; + } mpsslog("%s: %s %d shutdown_status %s\n", mic->name, __func__, __LINE__, shutdown_status); switch (get_mic_shutdown_status(mic, shutdown_status)) { @@ -1377,94 +1422,110 @@ static void mic_handle_shutdown(struct mic_info *mic) i--; } reset: - ret = kill(mic->pid, SIGTERM); - mpsslog("%s: %s %d kill pid %d ret %d\n", - mic->name, __func__, __LINE__, - mic->pid, ret); - if (!ret) { - ret = waitpid(mic->pid, &stat, - WIFSIGNALED(stat)); - mpsslog("%s: %s %d waitpid ret %d pid %d\n", - mic->name, __func__, __LINE__, - ret, mic->pid); - } - if (ret == mic->pid) - reset(mic); + if (!i) + mpsslog("%s: %s %d timing out waiting for shutdown_status %s\n", + mic->name, __func__, __LINE__, shutdown_status); + reset(mic); } -static void * -mic_config(void *arg) +static int open_state_fd(struct mic_info *mic) { - struct mic_info *mic = (struct mic_info *)arg; - char *state = NULL; char pathname[PATH_MAX]; - int fd, ret; - struct pollfd ufds[1]; - char value[4096]; + int fd; snprintf(pathname, PATH_MAX - 1, "%s/%s/%s", MICSYSFSDIR, mic->name, "state"); fd = open(pathname, O_RDONLY); - if (fd < 0) { + if (fd < 0) mpsslog("%s: opening file %s failed %s\n", mic->name, pathname, strerror(errno)); - goto error; + return fd; +} + +static int block_till_state_change(int fd, struct mic_info *mic) +{ + struct pollfd ufds[1]; + char value[PAGE_SIZE]; + int ret; + + ufds[0].fd = fd; + ufds[0].events = POLLERR | POLLPRI; + ret = poll(ufds, 1, -1); + if (ret < 0) { + mpsslog("%s: %s %d poll failed %s\n", + mic->name, __func__, __LINE__, strerror(errno)); + return ret; + } + + ret = lseek(fd, 0, SEEK_SET); + if (ret < 0) { + mpsslog("%s: %s %d Failed to seek to 0: %s\n", + mic->name, __func__, __LINE__, strerror(errno)); + return ret; + } + + ret = read(fd, value, sizeof(value)); + if (ret < 0) { + mpsslog("%s: %s %d Failed to read sysfs entry: %s\n", + mic->name, __func__, __LINE__, strerror(errno)); + return ret; + } + + return 0; +} + +static void * +mic_config(void *arg) +{ + struct mic_info *mic = (struct mic_info *)arg; + int fd, ret, stat = 0; + + fd = open_state_fd(mic); + if (fd < 0) { + mpsslog("%s: %s %d open state fd failed %s\n", + mic->name, __func__, __LINE__, strerror(errno)); + goto exit; } do { - ret = lseek(fd, 0, SEEK_SET); + ret = block_till_state_change(fd, mic); if (ret < 0) { - mpsslog("%s: Failed to seek to file start '%s': %s\n", - mic->name, pathname, strerror(errno)); - goto close_error1; + mpsslog("%s: %s %d block_till_state_change error %s\n", + mic->name, __func__, __LINE__, strerror(errno)); + goto close_exit; } - ret = read(fd, value, sizeof(value)); - if (ret < 0) { - mpsslog("%s: Failed to read sysfs entry '%s': %s\n", - mic->name, pathname, strerror(errno)); - goto close_error1; - } -retry: - state = readsysfs(mic->name, "state"); - if (!state) - goto retry; - mpsslog("%s: %s %d state %s\n", - mic->name, __func__, __LINE__, state); - switch (get_mic_state(mic, state)) { + + switch (get_mic_state(mic)) { case MIC_SHUTTING_DOWN: mic_handle_shutdown(mic); - goto close_error; - case MIC_SUSPENDING: - mic->boot_on_resume = 1; - setsysfs(mic->name, "state", "suspend"); - mic_handle_shutdown(mic); - goto close_error; - case MIC_OFFLINE: + break; + case MIC_READY: + case MIC_RESET_FAILED: + ret = kill(mic->pid, SIGTERM); + mpsslog("%s: %s %d kill pid %d ret %d\n", + mic->name, __func__, __LINE__, + mic->pid, ret); + if (!ret) { + ret = waitpid(mic->pid, &stat, + WIFSIGNALED(stat)); + mpsslog("%s: %s %d waitpid ret %d pid %d\n", + mic->name, __func__, __LINE__, + ret, mic->pid); + } if (mic->boot_on_resume) { setsysfs(mic->name, "state", "boot"); mic->boot_on_resume = 0; } - break; + goto close_exit; default: break; } - free(state); - - ufds[0].fd = fd; - ufds[0].events = POLLERR | POLLPRI; - ret = poll(ufds, 1, -1); - if (ret < 0) { - mpsslog("%s: poll failed %s\n", - mic->name, strerror(errno)); - goto close_error1; - } } while (1); -close_error: - free(state); -close_error1: + +close_exit: close(fd); -error: +exit: init_mic(mic); pthread_exit(NULL); } @@ -1477,15 +1538,15 @@ set_cmdline(struct mic_info *mic) len = snprintf(buffer, PATH_MAX, "clocksource=tsc highres=off nohz=off "); - len += snprintf(buffer + len, PATH_MAX - len, + len += snprintf(buffer + len, PATH_MAX, "cpufreq_on;corec6_off;pc3_off;pc6_off "); - len += snprintf(buffer + len, PATH_MAX - len, + len += snprintf(buffer + len, PATH_MAX, "ifcfg=static;address,172.31.%d.1;netmask,255.255.255.0", - mic->id); + mic->id + 1); setsysfs(mic->name, "cmdline", buffer); mpsslog("%s: Command line: \"%s\"\n", mic->name, buffer); - snprintf(buffer, PATH_MAX, "172.31.%d.1", mic->id); + snprintf(buffer, PATH_MAX, "172.31.%d.1", mic->id + 1); mpsslog("%s: IPADDR: \"%s\"\n", mic->name, buffer); } @@ -1541,8 +1602,6 @@ set_log_buf_info(struct mic_info *mic) close(fd); } -static void init_mic(struct mic_info *mic); - static void change_virtblk_backend(int x, siginfo_t *siginfo, void *p) { @@ -1553,8 +1612,16 @@ change_virtblk_backend(int x, siginfo_t *siginfo, void *p) } static void -init_mic(struct mic_info *mic) +set_mic_boot_params(struct mic_info *mic) +{ + set_log_buf_info(mic); + set_cmdline(mic); +} + +static void * +init_mic(void *arg) { + struct mic_info *mic = (struct mic_info *)arg; struct sigaction ignore = { .sa_flags = 0, .sa_handler = SIG_IGN @@ -1564,7 +1631,7 @@ init_mic(struct mic_info *mic) .sa_sigaction = change_virtblk_backend, }; char buffer[PATH_MAX]; - int err; + int err, fd; /* * Currently, one virtio block device is supported for each MIC card @@ -1577,12 +1644,38 @@ init_mic(struct mic_info *mic) * the MIC daemon. */ sigaction(SIGUSR1, &ignore, NULL); +retry: + fd = open_state_fd(mic); + if (fd < 0) { + mpsslog("%s: %s %d open state fd failed %s\n", + mic->name, __func__, __LINE__, strerror(errno)); + sleep(2); + goto retry; + } + + if (mic->restart) { + snprintf(buffer, PATH_MAX, "boot"); + setsysfs(mic->name, "state", buffer); + mpsslog("%s restarting mic %d\n", + mic->name, mic->restart); + mic->restart = 0; + } + + while (1) { + while (block_till_state_change(fd, mic)) { + mpsslog("%s: %s %d block_till_state_change error %s\n", + mic->name, __func__, __LINE__, strerror(errno)); + sleep(2); + continue; + } + + if (get_mic_state(mic) == MIC_BOOTING) + break; + } mic->pid = fork(); switch (mic->pid) { case 0: - set_log_buf_info(mic); - set_cmdline(mic); add_virtio_device(mic, &virtcons_dev_page.dd); add_virtio_device(mic, &virtnet_dev_page.dd); err = pthread_create(&mic->mic_console.console_thread, NULL, @@ -1612,24 +1705,29 @@ init_mic(struct mic_info *mic) mic->name, mic->id, errno); break; default: - if (mic->restart) { - snprintf(buffer, PATH_MAX, "boot"); - setsysfs(mic->name, "state", buffer); - mpsslog("%s restarting mic %d\n", - mic->name, mic->restart); - mic->restart = 0; - } - pthread_create(&mic->config_thread, NULL, mic_config, mic); + err = pthread_create(&mic->config_thread, NULL, + mic_config, mic); + if (err) + mpsslog("%s mic_config pthread_create failed %s\n", + mic->name, strerror(err)); } + + return NULL; } static void start_daemon(void) { struct mic_info *mic; + int err; - for (mic = mic_list.next; mic != NULL; mic = mic->next) - init_mic(mic); + for (mic = mic_list.next; mic; mic = mic->next) { + set_mic_boot_params(mic); + err = pthread_create(&mic->init_thread, NULL, init_mic, mic); + if (err) + mpsslog("%s init_mic pthread_create failed %s\n", + mic->name, strerror(err)); + } while (1) sleep(60); diff --git a/Documentation/mic/mpssd/mpssd.h b/Documentation/mic/mpssd/mpssd.h index f5f18b15d9a0..8bd64944aacc 100644 --- a/Documentation/mic/mpssd/mpssd.h +++ b/Documentation/mic/mpssd/mpssd.h @@ -86,6 +86,7 @@ struct mic_info { int id; char *name; pthread_t config_thread; + pthread_t init_thread; pid_t pid; struct mic_console_info mic_console; struct mic_net_info mic_net; diff --git a/Documentation/trace/intel_th.txt b/Documentation/trace/intel_th.txt new file mode 100644 index 000000000000..f7fc5ba5df8d --- /dev/null +++ b/Documentation/trace/intel_th.txt @@ -0,0 +1,99 @@ +Intel(R) Trace Hub (TH) +======================= + +Overview +-------- + +Intel(R) Trace Hub (TH) is a set of hardware blocks that produce, +switch and output trace data from multiple hardware and software +sources over several types of trace output ports encoded in System +Trace Protocol (MIPI STPv2) and is intended to perform full system +debugging. For more information on the hardware, see Intel(R) Trace +Hub developer's manual [1]. + +It consists of trace sources, trace destinations (outputs) and a +switch (Global Trace Hub, GTH). These devices are placed on a bus of +their own ("intel_th"), where they can be discovered and configured +via sysfs attributes. + +Currently, the following Intel TH subdevices (blocks) are supported: + - Software Trace Hub (STH), trace source, which is a System Trace + Module (STM) device, + - Memory Storage Unit (MSU), trace output, which allows storing + trace hub output in system memory, + - Parallel Trace Interface output (PTI), trace output to an external + debug host via a PTI port, + - Global Trace Hub (GTH), which is a switch and a central component + of Intel(R) Trace Hub architecture. + +Common attributes for output devices are described in +Documentation/ABI/testing/sysfs-bus-intel_th-output-devices, the most +notable of them is "active", which enables or disables trace output +into that particular output device. + +GTH allows directing different STP masters into different output ports +via its "masters" attribute group. More detailed GTH interface +description is at Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth. + +STH registers an stm class device, through which it provides interface +to userspace and kernelspace software trace sources. See +Documentation/tracing/stm.txt for more information on that. + +MSU can be configured to collect trace data into a system memory +buffer, which can later on be read from its device nodes via read() or +mmap() interface. + +On the whole, Intel(R) Trace Hub does not require any special +userspace software to function; everything can be configured, started +and collected via sysfs attributes, and device nodes. + +[1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf + +Bus and Subdevices +------------------ + +For each Intel TH device in the system a bus of its own is +created and assigned an id number that reflects the order in which TH +devices were emumerated. All TH subdevices (devices on intel_th bus) +begin with this id: 0-gth, 0-msc0, 0-msc1, 0-pti, 0-sth, which is +followed by device's name and an optional index. + +Output devices also get a device node in /dev/intel_thN, where N is +the Intel TH device id. For example, MSU's memory buffers, when +allocated, are accessible via /dev/intel_th0/msc{0,1}. + +Quick example +------------- + +# figure out which GTH port is the first memory controller: + +$ cat /sys/bus/intel_th/devices/0-msc0/port +0 + +# looks like it's port 0, configure master 33 to send data to port 0: + +$ echo 0 > /sys/bus/intel_th/devices/0-gth/masters/33 + +# allocate a 2-windowed multiblock buffer on the first memory +# controller, each with 64 pages: + +$ echo multi > /sys/bus/intel_th/devices/0-msc0/mode +$ echo 64,64 > /sys/bus/intel_th/devices/0-msc0/nr_pages + +# enable wrapping for this controller, too: + +$ echo 1 > /sys/bus/intel_th/devices/0-msc0/wrap + +# and enable tracing into this port: + +$ echo 1 > /sys/bus/intel_th/devices/0-msc0/active + +# .. send data to master 33, see stm.txt for more details .. +# .. wait for traces to pile up .. +# .. and stop the trace: + +$ echo 0 > /sys/bus/intel_th/devices/0-msc0/active + +# and now you can collect the trace from the device node: + +$ cat /dev/intel_th0/msc0 > my_stp_trace diff --git a/Documentation/trace/stm.txt b/Documentation/trace/stm.txt new file mode 100644 index 000000000000..ea035f9dbfd7 --- /dev/null +++ b/Documentation/trace/stm.txt @@ -0,0 +1,80 @@ +System Trace Module +=================== + +System Trace Module (STM) is a device described in MIPI STP specs as +STP trace stream generator. STP (System Trace Protocol) is a trace +protocol multiplexing data from multiple trace sources, each one of +which is assigned a unique pair of master and channel. While some of +these masters and channels are statically allocated to certain +hardware trace sources, others are available to software. Software +trace sources are usually free to pick for themselves any +master/channel combination from this pool. + +On the receiving end of this STP stream (the decoder side), trace +sources can only be identified by master/channel combination, so in +order for the decoder to be able to make sense of the trace that +involves multiple trace sources, it needs to be able to map those +master/channel pairs to the trace sources that it understands. + +For instance, it is helpful to know that syslog messages come on +master 7 channel 15, while arbitrary user applications can use masters +48 to 63 and channels 0 to 127. + +To solve this mapping problem, stm class provides a policy management +mechanism via configfs, that allows defining rules that map string +identifiers to ranges of masters and channels. If these rules (policy) +are consistent with what decoder expects, it will be able to properly +process the trace data. + +This policy is a tree structure containing rules (policy_node) that +have a name (string identifier) and a range of masters and channels +associated with it, located in "stp-policy" subsystem directory in +configfs. The topmost directory's name (the policy) is formatted as +the STM device name to which this policy applies and and arbitrary +string identifier separated by a stop. From the examle above, a rule +may look like this: + +$ ls /config/stp-policy/dummy_stm.my-policy/user +channels masters +$ cat /config/stp-policy/dummy_stm.my-policy/user/masters +48 63 +$ cat /config/stp-policy/dummy_stm.my-policy/user/channels +0 127 + +which means that the master allocation pool for this rule consists of +masters 48 through 63 and channel allocation pool has channels 0 +through 127 in it. Now, any producer (trace source) identifying itself +with "user" identification string will be allocated a master and +channel from within these ranges. + +These rules can be nested, for example, one can define a rule "dummy" +under "user" directory from the example above and this new rule will +be used for trace sources with the id string of "user/dummy". + +Trace sources have to open the stm class device's node and write their +trace data into its file descriptor. In order to identify themselves +to the policy, they need to do a STP_POLICY_ID_SET ioctl on this file +descriptor providing their id string. Otherwise, they will be +automatically allocated a master/channel pair upon first write to this +file descriptor according to the "default" rule of the policy, if such +exists. + +Some STM devices may allow direct mapping of the channel mmio regions +to userspace for zero-copy writing. One mappable page (in terms of +mmu) will usually contain multiple channels' mmios, so the user will +need to allocate that many channels to themselves (via the +aforementioned ioctl() call) to be able to do this. That is, if your +stm device's channel mmio region is 64 bytes and hardware page size is +4096 bytes, after a successful STP_POLICY_ID_SET ioctl() call with +width==64, you should be able to mmap() one page on this file +descriptor and obtain direct access to an mmio region for 64 channels. + +For kernel-based trace sources, there is "stm_source" device +class. Devices of this class can be connected and disconnected to/from +stm devices at runtime via a sysfs attribute. + +Examples of STM devices are Intel(R) Trace Hub [1] and Coresight STM +[2]. + +[1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf +[2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html diff --git a/Documentation/w1/masters/omap-hdq b/Documentation/w1/masters/omap-hdq index 884dc284b215..234522709a5f 100644 --- a/Documentation/w1/masters/omap-hdq +++ b/Documentation/w1/masters/omap-hdq @@ -44,3 +44,9 @@ e.g: insmod omap_hdq.ko W1_ID=2 inamod w1_bq27000.ko F_ID=2 +The driver also supports 1-wire mode. In this mode, there is no need to +pass slave ID as parameter. The driver will auto-detect slaves connected +to the bus using SEARCH_ROM procedure. 1-wire mode can be selected by +setting "ti,mode" property to "1w" in DT (see +Documentation/devicetree/bindings/w1/omap-hdq.txt for more details). +By default driver is in HDQ mode. |