aboutsummaryrefslogtreecommitdiff
path: root/Documentation/networking/tms380tr.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/tms380tr.txt')
-rw-r--r--Documentation/networking/tms380tr.txt147
1 files changed, 147 insertions, 0 deletions
diff --git a/Documentation/networking/tms380tr.txt b/Documentation/networking/tms380tr.txt
new file mode 100644
index 000000000000..179e527b9da1
--- /dev/null
+++ b/Documentation/networking/tms380tr.txt
@@ -0,0 +1,147 @@
+Text file for the Linux SysKonnect Token Ring ISA/PCI Adapter Driver.
+ Text file by: Jay Schulist <jschlst@samba.org>
+
+The Linux SysKonnect Token Ring driver works with the SysKonnect TR4/16(+) ISA,
+SysKonnect TR4/16(+) PCI, SysKonnect TR4/16 PCI, and older revisions of the
+SK NET TR4/16 ISA card.
+
+Latest information on this driver can be obtained on the Linux-SNA WWW site.
+Please point your browser to:
+http://www.linux-sna.org
+
+Many thanks to Christoph Goos for his excellent work on this driver and
+SysKonnect for donating the adapters to Linux-SNA for the testing and
+maintenance of this device driver.
+
+Important information to be noted:
+1. Adapters can be slow to open (~20 secs) and close (~5 secs), please be
+ patient.
+2. This driver works very well when autoprobing for adapters. Why even
+ think about those nasty io/int/dma settings of modprobe when the driver
+ will do it all for you!
+
+This driver is rather simple to use. Select Y to Token Ring adapter support
+in the kernel configuration. A choice for SysKonnect Token Ring adapters will
+appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this
+option. I personally recommend compiling the driver as a module (M), but if you
+you would like to compile it staticly answer Y instead.
+
+This driver supports multiple adapters without the need to load multiple copies
+of the driver. You should be able to load up to 7 adapters without any kernel
+modifications, if you are in need of more please contact the maintainer of this
+driver.
+
+Load the driver either by lilo/loadlin or as a module. When a module using the
+following command will suffice for most:
+
+# modprobe sktr
+
+This will produce output similar to the following: (Output is user specific)
+
+sktr.c: v1.01 08/29/97 by Christoph Goos
+tr0: SK NET TR 4/16 PCI found at 0x6100, using IRQ 17.
+tr1: SK NET TR 4/16 PCI found at 0x6200, using IRQ 16.
+tr2: SK NET TR 4/16 ISA found at 0xa20, using IRQ 10 and DMA 5.
+
+Now just setup the device via ifconfig and set and routes you may have. After
+this you are ready to start sending some tokens.
+
+Errata:
+For anyone wondering where to pick up the SysKonnect adapters please browse
+to http://www.syskonnect.com
+
+This driver is under the GNU General Public License. Its Firmware image is
+included as an initialized C-array and is licensed by SysKonnect to the Linux
+users of this driver. However no warranty about its fitness is expressed or
+implied by SysKonnect.
+
+Below find attached the setting for the SK NET TR 4/16 ISA adapters
+-------------------------------------------------------------------
+
+ ***************************
+ *** C O N T E N T S ***
+ ***************************
+
+ 1) Location of DIP-Switch W1
+ 2) Default settings
+ 3) DIP-Switch W1 description
+
+
+ ==============================================================
+ CHAPTER 1 LOCATION OF DIP-SWITCH
+ ==============================================================
+
+UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
+þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ
+þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ
+þUÄÄÄÄÄÄ¿ þ þ þ þ UÄÄÅ¿
+þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ
+þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU
+þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ
+þUÄÄÄÄÄÄ¿ þ þ AÄÄÄU AÄ¿
+þAÄÄÄÄÄÄU þ þ þ þ
+þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ
+þ þ þ
+þ AÄU
+þ þ
+þ þ
+þ þ
+þ þ
+AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU
+ AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU
+
+ ==============================================================
+ CHAPTER 2 DEFAULT SETTINGS
+ ==============================================================
+
+ W1 1 2 3 4 5 6 7 8
+ +------------------------------+
+ | ON X |
+ | OFF X X X X X X X |
+ +------------------------------+
+
+ W1.1 = ON Adapter drives address lines SA17..19
+ W1.2 - 1.5 = OFF BootROM disabled
+ W1.6 - 1.8 = OFF I/O address 0A20h
+
+ ==============================================================
+ CHAPTER 3 DIP SWITCH W1 DESCRIPTION
+ ==============================================================
+
+ UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿ ON
+ þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ
+ AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF
+ |AD | BootROM Addr. | I/O |
+ +-+-+-------+-------+-----+-----+
+ | | |
+ | | +------ 6 7 8
+ | | ON ON ON 1900h
+ | | ON ON OFF 0900h
+ | | ON OFF ON 1980h
+ | | ON OFF OFF 0980h
+ | | OFF ON ON 1b20h
+ | | OFF ON OFF 0b20h
+ | | OFF OFF ON 1a20h
+ | | OFF OFF OFF 0a20h (+)
+ | |
+ | |
+ | +-------- 2 3 4 5
+ | OFF x x x disabled (+)
+ | ON ON ON ON C0000
+ | ON ON ON OFF C4000
+ | ON ON OFF ON C8000
+ | ON ON OFF OFF CC000
+ | ON OFF ON ON D0000
+ | ON OFF ON OFF D4000
+ | ON OFF OFF ON D8000
+ | ON OFF OFF OFF DC000
+ |
+ |
+ +----- 1
+ OFF adapter does NOT drive SA<17..19>
+ ON adapter drives SA<17..19> (+)
+
+
+ (+) means default setting
+
+ ********************************