aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig13
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/boot/compressed/head.S6
-rw-r--r--arch/arm/configs/dove_defconfig1620
-rw-r--r--arch/arm/include/asm/hardware/cache-tauros2.h11
-rw-r--r--arch/arm/mach-dove/Kconfig14
-rw-r--r--arch/arm/mach-dove/Makefile3
-rw-r--r--arch/arm/mach-dove/Makefile.boot3
-rw-r--r--arch/arm/mach-dove/addr-map.c149
-rw-r--r--arch/arm/mach-dove/common.c781
-rw-r--r--arch/arm/mach-dove/common.h40
-rw-r--r--arch/arm/mach-dove/dove-db-setup.c102
-rw-r--r--arch/arm/mach-dove/include/mach/bridge-regs.h58
-rw-r--r--arch/arm/mach-dove/include/mach/debug-macro.S20
-rw-r--r--arch/arm/mach-dove/include/mach/dove.h180
-rw-r--r--arch/arm/mach-dove/include/mach/entry-macro.S39
-rw-r--r--arch/arm/mach-dove/include/mach/gpio.h49
-rw-r--r--arch/arm/mach-dove/include/mach/hardware.h26
-rw-r--r--arch/arm/mach-dove/include/mach/io.h20
-rw-r--r--arch/arm/mach-dove/include/mach/irqs.h101
-rw-r--r--arch/arm/mach-dove/include/mach/memory.h10
-rw-r--r--arch/arm/mach-dove/include/mach/pm.h54
-rw-r--r--arch/arm/mach-dove/include/mach/system.h36
-rw-r--r--arch/arm/mach-dove/include/mach/timex.h9
-rw-r--r--arch/arm/mach-dove/include/mach/uncompress.h37
-rw-r--r--arch/arm/mach-dove/include/mach/vmalloc.h5
-rw-r--r--arch/arm/mach-dove/irq.c133
-rw-r--r--arch/arm/mach-dove/pcie.c238
-rw-r--r--arch/arm/mach-kirkwood/Kconfig12
-rw-r--r--arch/arm/mach-kirkwood/Makefile3
-rw-r--r--arch/arm/mach-kirkwood/ts219-setup.c108
-rw-r--r--arch/arm/mach-kirkwood/ts41x-setup.c154
-rw-r--r--arch/arm/mach-kirkwood/tsx1x-common.c113
-rw-r--r--arch/arm/mach-kirkwood/tsx1x-common.h7
-rw-r--r--arch/arm/mm/Kconfig11
-rw-r--r--arch/arm/mm/Makefile2
-rw-r--r--arch/arm/mm/cache-tauros2.c263
-rw-r--r--arch/arm/mm/proc-v6.S33
-rw-r--r--drivers/rtc/Kconfig2
39 files changed, 4356 insertions, 110 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 455284edda25..62152ae34758 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -433,6 +433,17 @@ config ARCH_L7200
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_DOVE
+ bool "Marvell Dove"
+ select PCI
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select PLAT_ORION
+ help
+ Support for the Marvell Dove SoC 88AP510
+
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
select CPU_FEROCEON
@@ -747,6 +758,8 @@ source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-dove/Kconfig"
+
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a73caaf66763..2ddc323b1c6a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_DAVINCI) := davinci
+machine-$(CONFIG_ARCH_DOVE) := dove
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fa6fbf45cf3b..d356af7cef82 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -743,6 +743,12 @@ proc_types:
W(b) __armv4_mmu_cache_off
W(b) __armv6_mmu_cache_flush
+ .word 0x560f5810 @ Marvell PJ4 ARMv6
+ .word 0xff0ffff0
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv6_mmu_cache_flush
+
.word 0x000f0000 @ new CPU Id
.word 0x000f0000
W(b) __armv7_mmu_cache_on
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
new file mode 100644
index 000000000000..b3a491675d59
--- /dev/null
+++ b/arch/arm/configs/dove_defconfig
@@ -0,0 +1,1620 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Tue Nov 24 13:53:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_DOVE=y
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Marvell Dove Implementations
+#
+CONFIG_MACH_DOVE_DB=y
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_TAUROS2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_ORION=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
new file mode 100644
index 000000000000..538f17ca905b
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/include/asm/hardware/cache-tauros2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init tauros2_init(void);
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
new file mode 100644
index 000000000000..3b9a32ace909
--- /dev/null
+++ b/arch/arm/mach-dove/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_DOVE
+
+menu "Marvell Dove Implementations"
+
+config MACH_DOVE_DB
+ bool "Marvell DB-MV88AP510 Development Board"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DB-MV88AP510 Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
new file mode 100644
index 000000000000..7ab3be53f642
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile
@@ -0,0 +1,3 @@
+obj-y += common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
new file mode 100644
index 000000000000..00be4fc26dd7
--- /dev/null
+++ b/arch/arm/mach-dove/addr-map.c
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-dove/addr-map.c
+ *
+ * Address map functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR 0x0
+#define TARGET_BOOTROM 0x1
+#define TARGET_CESA 0x3
+#define TARGET_PCIE0 0x4
+#define TARGET_PCIE1 0x8
+#define TARGET_SCRATCHPAD 0xd
+
+#define ATTR_CESA 0x01
+#define ATTR_BOOTROM 0xfd
+#define ATTR_DEV_SPI0_ROM 0xfe
+#define ATTR_DEV_SPI1_ROM 0xfb
+#define ATTR_PCIE_IO 0xe0
+#define ATTR_PCIE_MEM 0xe8
+#define ATTR_SCRATCHPAD 0x0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
+#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
+#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
+#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
+
+struct mbus_dram_target_info dove_mbus_dram_info;
+
+static inline void __iomem *ddr_map_sc(int i)
+{
+ return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
+}
+
+static int cpu_win_can_remap(int win)
+{
+ if (win < 4)
+ return 1;
+
+ return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+ u8 target, u8 attr, int remap)
+{
+ u32 ctrl;
+
+ base &= 0xffff0000;
+ ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+ writel(base, WIN_BASE(win));
+ writel(ctrl, WIN_CTRL(win));
+ if (cpu_win_can_remap(win)) {
+ if (remap < 0)
+ remap = base;
+ writel(remap & 0xffff0000, WIN_REMAP_LO(win));
+ writel(0, WIN_REMAP_HI(win));
+ }
+}
+
+void __init dove_setup_cpu_mbus(void)
+{
+ int i;
+ int cs;
+
+ /*
+ * First, disable and clear windows.
+ */
+ for (i = 0; i < 8; i++) {
+ writel(0, WIN_BASE(i));
+ writel(0, WIN_CTRL(i));
+ if (cpu_win_can_remap(i)) {
+ writel(0, WIN_REMAP_LO(i));
+ writel(0, WIN_REMAP_HI(i));
+ }
+ }
+
+ /*
+ * Setup windows for PCIe IO+MEM space.
+ */
+ setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
+ setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
+ setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+ setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+ /*
+ * Setup window for CESA engine.
+ */
+ setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+ TARGET_CESA, ATTR_CESA, -1);
+
+ /*
+ * Setup the Window to the BootROM for Standby and Sleep Resume
+ */
+ setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+ TARGET_BOOTROM, ATTR_BOOTROM, -1);
+
+ /*
+ * Setup the Window to the PMU Scratch Pad space
+ */
+ setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+ TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+
+ /*
+ * Setup MBUS dram target info.
+ */
+ dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ for (i = 0, cs = 0; i < 2; i++) {
+ u32 map = readl(ddr_map_sc(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (map & 1) {
+ struct mbus_dram_window *w;
+
+ w = &dove_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0; /* CS address decoding done inside */
+ /* the DDR controller, no need to */
+ /* provide attributes */
+ w->base = map & 0xff800000;
+ w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+ }
+ }
+ dove_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
new file mode 100644
index 000000000000..806972a68c87
--- /dev/null
+++ b/arch/arm/mach-dove/common.c
@@ -0,0 +1,781 @@
+/*
+ * arch/arm/mach-dove/common.c
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/gpio.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/pci.h>
+#include <mach/dove.h>
+#include <mach/bridge-regs.h>
+#include <asm/mach/arch.h>
+#include <linux/irq.h>
+#include <plat/mv_xor.h>
+#include <plat/ehci-orion.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc dove_io_desc[] __initdata = {
+ {
+ .virtual = DOVE_SB_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
+ .length = DOVE_SB_REGS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = DOVE_NB_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
+ .length = DOVE_NB_REGS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = DOVE_PCIE0_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
+ .length = DOVE_PCIE0_IO_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = DOVE_PCIE1_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
+ .length = DOVE_PCIE1_IO_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init dove_map_io(void)
+{
+ iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
+}
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data dove_ehci_data = {
+ .dram = &dove_mbus_dram_info,
+ .phy_version = EHCI_PHY_NA,
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource dove_ehci0_resources[] = {
+ {
+ .start = DOVE_USB0_PHYS_BASE,
+ .end = DOVE_USB0_PHYS_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_USB0,
+ .end = IRQ_DOVE_USB0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_ehci0 = {
+ .name = "orion-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dove_ehci_data,
+ },
+ .resource = dove_ehci0_resources,
+ .num_resources = ARRAY_SIZE(dove_ehci0_resources),
+};
+
+void __init dove_ehci0_init(void)
+{
+ platform_device_register(&dove_ehci0);
+}
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource dove_ehci1_resources[] = {
+ {
+ .start = DOVE_USB1_PHYS_BASE,
+ .end = DOVE_USB1_PHYS_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_USB1,
+ .end = IRQ_DOVE_USB1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_ehci1 = {
+ .name = "orion-ehci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dove_ehci_data,
+ },
+ .resource = dove_ehci1_resources,
+ .num_resources = ARRAY_SIZE(dove_ehci1_resources),
+};
+
+void __init dove_ehci1_init(void)
+{
+ platform_device_register(&dove_ehci1);
+}
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
+ .t_clk = 0,
+ .dram = &dove_mbus_dram_info,
+};
+
+static struct resource dove_ge00_shared_resources[] = {
+ {
+ .name = "ge00 base",
+ .start = DOVE_GE00_PHYS_BASE + 0x2000,
+ .end = DOVE_GE00_PHYS_BASE + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dove_ge00_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &dove_ge00_shared_data,
+ },
+ .num_resources = 1,
+ .resource = dove_ge00_shared_resources,
+};
+
+static struct resource dove_ge00_resources[] = {
+ {
+ .name = "ge00 irq",
+ .start = IRQ_DOVE_GE00_SUM,
+ .end = IRQ_DOVE_GE00_SUM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_ge00 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = dove_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &dove_ge00_shared;
+ dove_ge00.dev.platform_data = eth_data;
+
+ platform_device_register(&dove_ge00_shared);
+ platform_device_register(&dove_ge00);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource dove_rtc_resource[] = {
+ {
+ .start = DOVE_RTC_PHYS_BASE,
+ .end = DOVE_RTC_PHYS_BASE + 32 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_RTC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+void __init dove_rtc_init(void)
+{
+ platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
+}
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource dove_sata_resources[] = {
+ {
+ .name = "sata base",
+ .start = DOVE_SATA_PHYS_BASE,
+ .end = DOVE_SATA_PHYS_BASE + 0x5000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sata irq",
+ .start = IRQ_DOVE_SATA,
+ .end = IRQ_DOVE_SATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_sata = {
+ .name = "sata_mv",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(dove_sata_resources),
+ .resource = dove_sata_resources,
+};
+
+void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
+{
+ sata_data->dram = &dove_mbus_dram_info;
+ dove_sata.dev.platform_data = sata_data;
+ platform_device_register(&dove_sata);
+}
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart0_data[] = {
+ {
+ .mapbase = DOVE_UART0_PHYS_BASE,
+ .membase = (char *)DOVE_UART0_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart0_resources[] = {
+ {
+ .start = DOVE_UART0_PHYS_BASE,
+ .end = DOVE_UART0_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_0,
+ .end = IRQ_DOVE_UART_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart0 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = dove_uart0_data,
+ },
+ .resource = dove_uart0_resources,
+ .num_resources = ARRAY_SIZE(dove_uart0_resources),
+};
+
+void __init dove_uart0_init(void)
+{
+ platform_device_register(&dove_uart0);
+}
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart1_data[] = {
+ {
+ .mapbase = DOVE_UART1_PHYS_BASE,
+ .membase = (char *)DOVE_UART1_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart1_resources[] = {
+ {
+ .start = DOVE_UART1_PHYS_BASE,
+ .end = DOVE_UART1_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_1,
+ .end = IRQ_DOVE_UART_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart1 = {
+ .name = "serial8250",
+ .id = 1,
+ .dev = {
+ .platform_data = dove_uart1_data,
+ },
+ .resource = dove_uart1_resources,
+ .num_resources = ARRAY_SIZE(dove_uart1_resources),
+};
+
+void __init dove_uart1_init(void)
+{
+ platform_device_register(&dove_uart1);
+}
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart2_data[] = {
+ {
+ .mapbase = DOVE_UART2_PHYS_BASE,
+ .membase = (char *)DOVE_UART2_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_2,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart2_resources[] = {
+ {
+ .start = DOVE_UART2_PHYS_BASE,
+ .end = DOVE_UART2_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_2,
+ .end = IRQ_DOVE_UART_2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart2 = {
+ .name = "serial8250",
+ .id = 2,
+ .dev = {
+ .platform_data = dove_uart2_data,
+ },
+ .resource = dove_uart2_resources,
+ .num_resources = ARRAY_SIZE(dove_uart2_resources),
+};
+
+void __init dove_uart2_init(void)
+{
+ platform_device_register(&dove_uart2);
+}
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart3_data[] = {
+ {
+ .mapbase = DOVE_UART3_PHYS_BASE,
+ .membase = (char *)DOVE_UART3_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_3,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart3_resources[] = {
+ {
+ .start = DOVE_UART3_PHYS_BASE,
+ .end = DOVE_UART3_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_3,
+ .end = IRQ_DOVE_UART_3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart3 = {
+ .name = "serial8250",
+ .id = 3,
+ .dev = {
+ .platform_data = dove_uart3_data,
+ },
+ .resource = dove_uart3_resources,
+ .num_resources = ARRAY_SIZE(dove_uart3_resources),
+};
+
+void __init dove_uart3_init(void)
+{
+ platform_device_register(&dove_uart3);
+}
+
+/*****************************************************************************
+ * SPI0
+ ****************************************************************************/
+static struct orion_spi_info dove_spi0_data = {
+ .tclk = 0,
+};
+
+static struct resource dove_spi0_resources[] = {
+ {
+ .start = DOVE_SPI0_PHYS_BASE,
+ .end = DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_SPI0,
+ .end = IRQ_DOVE_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_spi0 = {
+ .name = "orion_spi",
+ .id = 0,
+ .resource = dove_spi0_resources,
+ .dev = {
+ .platform_data = &dove_spi0_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_spi0_resources),
+};
+
+void __init dove_spi0_init(void)
+{
+ platform_device_register(&dove_spi0);
+}
+
+/*****************************************************************************
+ * SPI1
+ ****************************************************************************/
+static struct orion_spi_info dove_spi1_data = {
+ .tclk = 0,
+};
+
+static struct resource dove_spi1_resources[] = {
+ {
+ .start = DOVE_SPI1_PHYS_BASE,
+ .end = DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_SPI1,
+ .end = IRQ_DOVE_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_spi1 = {
+ .name = "orion_spi",
+ .id = 1,
+ .resource = dove_spi1_resources,
+ .dev = {
+ .platform_data = &dove_spi1_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_spi1_resources),
+};
+
+void __init dove_spi1_init(void)
+{
+ platform_device_register(&dove_spi1);
+}
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata dove_i2c_data = {
+ .freq_m = 10, /* assumes 166 MHz TCLK gets 94.3kHz */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource dove_i2c_resources[] = {
+ {
+ .name = "i2c base",
+ .start = DOVE_I2C_PHYS_BASE,
+ .end = DOVE_I2C_PHYS_BASE + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c irq",
+ .start = IRQ_DOVE_I2C,
+ .end = IRQ_DOVE_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_i2c = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dove_i2c_resources),
+ .resource = dove_i2c_resources,
+ .dev = {
+ .platform_data = &dove_i2c_data,
+ },
+};
+
+void __init dove_i2c_init(void)
+{
+ platform_device_register(&dove_i2c);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static int get_tclk(void)
+{
+ /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
+ return 166666667;
+}
+
+static void dove_timer_init(void)
+{
+ orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
+}
+
+struct sys_timer dove_timer = {
+ .init = dove_timer_init,
+};
+
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data dove_xor_shared_data = {
+ .dram = &dove_mbus_dram_info,
+};
+
+/*****************************************************************************
+ * XOR 0
+ ****************************************************************************/
+static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor0_shared_resources[] = {
+ {
+ .name = "xor 0 low",
+ .start = DOVE_XOR0_PHYS_BASE,
+ .end = DOVE_XOR0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 0 high",
+ .start = DOVE_XOR0_HIGH_PHYS_BASE,
+ .end = DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dove_xor0_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &dove_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_xor0_shared_resources),
+ .resource = dove_xor0_shared_resources,
+};
+
+static struct resource dove_xor00_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_00,
+ .end = IRQ_DOVE_XOR_00,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor00_data = {
+ .shared = &dove_xor0_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor00_channel = {
+ .name = MV_XOR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dove_xor00_resources),
+ .resource = dove_xor00_resources,
+ .dev = {
+ .dma_mask = &dove_xor0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor00_data,
+ },
+};
+
+static struct resource dove_xor01_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_01,
+ .end = IRQ_DOVE_XOR_01,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor01_data = {
+ .shared = &dove_xor0_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor01_channel = {
+ .name = MV_XOR_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(dove_xor01_resources),
+ .resource = dove_xor01_resources,
+ .dev = {
+ .dma_mask = &dove_xor0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor01_data,
+ },
+};
+
+void __init dove_xor0_init(void)
+{
+ platform_device_register(&dove_xor0_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
+ platform_device_register(&dove_xor00_channel);
+
+ dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
+ platform_device_register(&dove_xor01_channel);
+}
+
+/*****************************************************************************
+ * XOR 1
+ ****************************************************************************/
+static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor1_shared_resources[] = {
+ {
+ .name = "xor 0 low",
+ .start = DOVE_XOR1_PHYS_BASE,
+ .end = DOVE_XOR1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 0 high",
+ .start = DOVE_XOR1_HIGH_PHYS_BASE,
+ .end = DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dove_xor1_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 1,
+ .dev = {
+ .platform_data = &dove_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_xor1_shared_resources),
+ .resource = dove_xor1_shared_resources,
+};
+
+static struct resource dove_xor10_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_10,
+ .end = IRQ_DOVE_XOR_10,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor10_data = {
+ .shared = &dove_xor1_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor10_channel = {
+ .name = MV_XOR_NAME,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(dove_xor10_resources),
+ .resource = dove_xor10_resources,
+ .dev = {
+ .dma_mask = &dove_xor1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor10_data,
+ },
+};
+
+static struct resource dove_xor11_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_11,
+ .end = IRQ_DOVE_XOR_11,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor11_data = {
+ .shared = &dove_xor1_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor11_channel = {
+ .name = MV_XOR_NAME,
+ .id = 3,
+ .num_resources = ARRAY_SIZE(dove_xor11_resources),
+ .resource = dove_xor11_resources,
+ .dev = {
+ .dma_mask = &dove_xor1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor11_data,
+ },
+};
+
+void __init dove_xor1_init(void)
+{
+ platform_device_register(&dove_xor1_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
+ platform_device_register(&dove_xor10_channel);
+
+ dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
+ platform_device_register(&dove_xor11_channel);
+}
+
+void __init dove_init(void)
+{
+ int tclk;
+
+ tclk = get_tclk();
+
+ printk(KERN_INFO "Dove 88AP510 SoC, ");
+ printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init();
+#endif
+ dove_setup_cpu_mbus();
+
+ dove_ge00_shared_data.t_clk = tclk;
+ dove_uart0_data[0].uartclk = tclk;
+ dove_uart1_data[0].uartclk = tclk;
+ dove_uart2_data[0].uartclk = tclk;
+ dove_uart3_data[0].uartclk = tclk;
+ dove_spi0_data.tclk = tclk;
+ dove_spi1_data.tclk = tclk;
+
+ /* internal devices that every board has */
+ dove_rtc_init();
+ dove_xor0_init();
+ dove_xor1_init();
+}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
new file mode 100644
index 000000000000..b29e8937de4f
--- /dev/null
+++ b/arch/arm/mach-dove/common.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-dove/common.h
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_DOVE_COMMON_H
+#define __ARCH_DOVE_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+extern struct sys_timer dove_timer;
+extern struct mbus_dram_target_info dove_mbus_dram_info;
+
+/*
+ * Basic Dove init functions used early by machine-setup.
+ */
+void dove_map_io(void);
+void dove_init(void);
+void dove_init_irq(void);
+void dove_setup_cpu_mbus(void);
+void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void dove_sata_init(struct mv_sata_platform_data *sata_data);
+void dove_pcie_init(int init_port0, int init_port1);
+void dove_ehci0_init(void);
+void dove_ehci1_init(void);
+void dove_uart0_init(void);
+void dove_uart1_init(void);
+void dove_uart2_init(void);
+void dove_uart3_init(void);
+void dove_spi0_init(void);
+void dove_spi1_init(void);
+void dove_i2c_init(void);
+
+#endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
new file mode 100644
index 000000000000..f2971b745224
--- /dev/null
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-dove/dove-db-setup.c
+ *
+ * Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/dove.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dove_db_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data dove_db_sata_data = {
+ .n_ports = 1,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * SPI0: 4M Flash ST-M25P32-VMF6P
+ ****************************************************************************/
+static const struct flash_platform_data dove_db_spi_flash_data = {
+ .type = "m25p64",
+};
+
+static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &dove_db_spi_flash_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+static int __init dove_db_pci_init(void)
+{
+ if (machine_is_dove_db())
+ dove_pcie_init(1, 1);
+
+ return 0;
+}
+
+subsys_initcall(dove_db_pci_init);
+
+/*****************************************************************************
+ * Board Init
+ ****************************************************************************/
+static void __init dove_db_init(void)
+{
+ /*
+ * Basic Dove setup. Needs to be called early.
+ */
+ dove_init();
+
+ dove_ge00_init(&dove_db_ge00_data);
+ dove_ehci0_init();
+ dove_ehci1_init();
+ dove_sata_init(&dove_db_sata_data);
+ dove_spi0_init();
+ dove_spi1_init();
+ dove_uart0_init();
+ dove_uart1_init();
+ dove_i2c_init();
+ spi_register_board_info(dove_db_spi_flash_info,
+ ARRAY_SIZE(dove_db_spi_flash_info));
+}
+
+MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
+ .phys_io = DOVE_SB_REGS_PHYS_BASE,
+ .io_pg_offst = ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = dove_db_init,
+ .map_io = dove_map_io,
+ .init_irq = dove_init_irq,
+ .timer = &dove_timer,
+MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
new file mode 100644
index 000000000000..214a4c31f069
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-dove/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/dove.h>
+
+#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000)
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CTRL_PCIE0_LINK 0x00000001
+#define CPU_RESET 0x00000002
+#define CPU_CTRL_PCIE1_LINK 0x00000008
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define FIQ_MASK_LOW_OFF 0x0008
+#define ENDPOINT_MASK_LOW_OFF 0x000c
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define FIQ_MASK_HIGH_OFF 0x0018
+#define ENDPOINT_MASK_HIGH_OFF 0x001c
+#define PCIE_INTERRUPT_MASK_OFF 0x0020
+
+#define IRQ_MASK_LOW (IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
+#define FIQ_MASK_LOW (IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
+#define ENDPOINT_MASK_LOW (IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
+#define IRQ_MASK_HIGH (IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
+#define FIQ_MASK_HIGH (IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
+#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
+#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
+
+#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
new file mode 100644
index 000000000000..9b89ec7d3040
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
+ ldrne \rx, =DOVE_SB_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
new file mode 100644
index 000000000000..f6a08397f046
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-dove/include/mach/dove.h
+ *
+ * Generic definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_DOVE_H
+#define __ASM_ARCH_DOVE_H
+
+#include <mach/vmalloc.h>
+
+/*
+ * Marvell Dove address maps.
+ *
+ * phys virt size
+ * c8000000 fdb00000 1M Cryptographic SRAM
+ * e0000000 @runtime 128M PCIe-0 Memory space
+ * e8000000 @runtime 128M PCIe-1 Memory space
+ * f1000000 fde00000 8M on-chip south-bridge registers
+ * f1800000 fe600000 8M on-chip north-bridge registers
+ * f2000000 fee00000 1M PCIe-0 I/O space
+ * f2100000 fef00000 1M PCIe-1 I/O space
+ */
+
+#define DOVE_CESA_PHYS_BASE 0xc8000000
+#define DOVE_CESA_VIRT_BASE 0xfdb00000
+#define DOVE_CESA_SIZE SZ_1M
+
+#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000
+#define DOVE_PCIE0_MEM_SIZE SZ_128M
+
+#define DOVE_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define DOVE_PCIE1_MEM_SIZE SZ_128M
+
+#define DOVE_BOOTROM_PHYS_BASE 0xf8000000
+#define DOVE_BOOTROM_SIZE SZ_128M
+
+#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000
+#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000
+#define DOVE_SCRATCHPAD_SIZE SZ_1M
+
+#define DOVE_SB_REGS_PHYS_BASE 0xf1000000
+#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
+#define DOVE_SB_REGS_SIZE SZ_8M
+
+#define DOVE_NB_REGS_PHYS_BASE 0xf1800000
+#define DOVE_NB_REGS_VIRT_BASE 0xfe600000
+#define DOVE_NB_REGS_SIZE SZ_8M
+
+#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
+#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000
+#define DOVE_PCIE0_IO_BUS_BASE 0x00000000
+#define DOVE_PCIE0_IO_SIZE SZ_1M
+
+#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000
+#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000
+#define DOVE_PCIE1_IO_BUS_BASE 0x00100000
+#define DOVE_PCIE1_IO_SIZE SZ_1M
+
+/*
+ * Dove Core Registers Map
+ */
+
+/* SPI, I2C, UART */
+#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000)
+#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000)
+#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000)
+#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100)
+#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100)
+#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200)
+#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200)
+#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300)
+#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300)
+#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600)
+#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600)
+
+/* North-South Bridge */
+#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+
+/* Cryptographic Engine */
+#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
+
+/* PCIe 0 */
+#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000)
+
+/* USB */
+#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000)
+#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000)
+
+/* XOR 0 Engine */
+#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800)
+#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+
+/* XOR 1 Engine */
+#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900)
+#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+
+/* Gigabit Ethernet */
+#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000)
+
+/* PCIe 1 */
+#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000)
+
+/* CAFE */
+#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000)
+#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000)
+#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000)
+
+/* SATA */
+#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+
+/* I2S/SPDIF */
+#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000)
+#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+
+/* NAND Flash Controller */
+#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+
+/* MPP, GPIO, Reset Sampling */
+#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
+#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
+#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
+#define DOVE_NAND_GPIO_EN (1 << 0)
+#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40)
+
+
+/* Power Management */
+#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+
+/* Real Time Clock */
+#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+
+/* AC97 */
+#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000)
+#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+
+/* Peripheral DMA */
+#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000)
+#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+
+#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7)
+#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20)
+#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21)
+#define DOVE_TWSI_OPTION3_GPIO (1 << 22)
+#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_ON_AU1 (1 << 0)
+#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
+#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
+/* Memory Controller */
+#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000)
+
+/* LCD Controller */
+#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000)
+#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000)
+
+/* Graphic Engine */
+#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000)
+
+/* Video Engine */
+#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
new file mode 100644
index 000000000000..e84c78c2a8b7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-dove/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Dove platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+
+ @ if no low interrupts set, check high interrupts
+ ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ moveq \irqnr, #63
+ andeqs \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
new file mode 100644
index 000000000000..0ee70ff39e11
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-dove/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#define GPIO_MAX 64
+
+#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00)
+#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20)
+
+#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+
+#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00)
+#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04)
+#define GPIO_BLINK_EN(pin) (GPIO_BASE(pin) + 0x08)
+#define GPIO_IN_POL(pin) (GPIO_BASE(pin) + 0x0c)
+#define GPIO_DATA_IN(pin) (GPIO_BASE(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin) (GPIO_BASE(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin) (GPIO_BASE(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin) (GPIO_BASE(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+ if (pin < NR_GPIO_IRQS)
+ return pin + IRQ_DOVE_GPIO_START;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+ if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
+ return irq - IRQ_DOVE_GPIO_START;
+
+ return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h
new file mode 100644
index 000000000000..32b0826e7873
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/hardware.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-dove/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "dove.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE
+
+
+/* Macros below are required for compatibility with PXA AC'97 driver. */
+#define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
+ DOVE_SB_REGS_VIRT_BASE)))
+#define __PREG(x) (((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
+ DOVE_SB_REGS_PHYS_BASE)
+#endif
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
new file mode 100644
index 000000000000..3b3e4721ce2e
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "dove.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
+ DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
new file mode 100644
index 000000000000..46681466f92b
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-dove/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Dove Low Interrupt Controller
+ */
+#define IRQ_DOVE_BRIDGE 0
+#define IRQ_DOVE_H2C 1
+#define IRQ_DOVE_C2H 2
+#define IRQ_DOVE_NAND 3
+#define IRQ_DOVE_PDMA 4
+#define IRQ_DOVE_SPI1 5
+#define IRQ_DOVE_SPI0 6
+#define IRQ_DOVE_UART_0 7
+#define IRQ_DOVE_UART_1 8
+#define IRQ_DOVE_UART_2 9
+#define IRQ_DOVE_UART_3 10
+#define IRQ_DOVE_I2C 11
+#define IRQ_DOVE_GPIO_0_7 12
+#define IRQ_DOVE_GPIO_8_15 13
+#define IRQ_DOVE_GPIO_16_23 14
+#define IRQ_DOVE_PCIE0_ERR 15
+#define IRQ_DOVE_PCIE0 16
+#define IRQ_DOVE_PCIE1_ERR 17
+#define IRQ_DOVE_PCIE1 18
+#define IRQ_DOVE_I2S0 19
+#define IRQ_DOVE_I2S0_ERR 20
+#define IRQ_DOVE_I2S1 21
+#define IRQ_DOVE_I2S1_ERR 22
+#define IRQ_DOVE_USB_ERR 23
+#define IRQ_DOVE_USB0 24
+#define IRQ_DOVE_USB1 25
+#define IRQ_DOVE_GE00_RX 26
+#define IRQ_DOVE_GE00_TX 27
+#define IRQ_DOVE_GE00_MISC 28
+#define IRQ_DOVE_GE00_SUM 29
+#define IRQ_DOVE_GE00_ERR 30
+#define IRQ_DOVE_CRYPTO 31
+
+/*
+ * Dove High Interrupt Controller
+ */
+#define IRQ_DOVE_AC97 32
+#define IRQ_DOVE_PMU 33
+#define IRQ_DOVE_CAM 34
+#define IRQ_DOVE_SDIO0 35
+#define IRQ_DOVE_SDIO1 36
+#define IRQ_DOVE_SDIO0_WAKEUP 37
+#define IRQ_DOVE_SDIO1_WAKEUP 38
+#define IRQ_DOVE_XOR_00 39
+#define IRQ_DOVE_XOR_01 40
+#define IRQ_DOVE_XOR0_ERR 41
+#define IRQ_DOVE_XOR_10 42
+#define IRQ_DOVE_XOR_11 43
+#define IRQ_DOVE_XOR1_ERR 44
+#define IRQ_DOVE_LCD_DCON 45
+#define IRQ_DOVE_LCD1 46
+#define IRQ_DOVE_LCD0 47
+#define IRQ_DOVE_GPU 48
+#define IRQ_DOVE_PERFORM_MNTR 49
+#define IRQ_DOVE_VPRO_DMA1 51
+#define IRQ_DOVE_SSP_TIMER 54
+#define IRQ_DOVE_SSP 55
+#define IRQ_DOVE_MC_L2_ERR 56
+#define IRQ_DOVE_CRYPTO_ERR 59
+#define IRQ_DOVE_GPIO_24_31 60
+#define IRQ_DOVE_HIGH_GPIO 61
+#define IRQ_DOVE_SATA 62
+
+/*
+ * DOVE General Purpose Pins
+ */
+#define IRQ_DOVE_GPIO_START 64
+#define NR_GPIO_IRQS 64
+
+/*
+ * PMU interrupts
+ */
+#define IRQ_DOVE_PMU_START (IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
+#define NR_PMU_IRQS 7
+#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5)
+
+#define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+
+/* Required for compatability with PXA AC97 driver. */
+#define IRQ_AC97 IRQ_DOVE_AC97
+/* Required for compatability with PXA DMA driver. */
+#define IRQ_DMA IRQ_DOVE_PDMA
+/* Required for compatability with PXA NAND driver */
+#define IRQ_NAND IRQ_DOVE_NAND
+#endif
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
new file mode 100644
index 000000000000..d66872074946
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/memory.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-dove/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
new file mode 100644
index 000000000000..3ad9f946a9e8
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-dove/include/mach/pm.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PM_H
+#define __ASM_ARCH_PM_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+
+#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38)
+#define CLOCK_GATING_USB0_MASK (1 << 0)
+#define CLOCK_GATING_USB1_MASK (1 << 1)
+#define CLOCK_GATING_GBE_MASK (1 << 2)
+#define CLOCK_GATING_SATA_MASK (1 << 3)
+#define CLOCK_GATING_PCIE0_MASK (1 << 4)
+#define CLOCK_GATING_PCIE1_MASK (1 << 5)
+#define CLOCK_GATING_SDIO0_MASK (1 << 8)
+#define CLOCK_GATING_SDIO1_MASK (1 << 9)
+#define CLOCK_GATING_NAND_MASK (1 << 10)
+#define CLOCK_GATING_CAMERA_MASK (1 << 11)
+#define CLOCK_GATING_I2S0_MASK (1 << 12)
+#define CLOCK_GATING_I2S1_MASK (1 << 13)
+#define CLOCK_GATING_CRYPTO_MASK (1 << 15)
+#define CLOCK_GATING_AC97_MASK (1 << 21)
+#define CLOCK_GATING_PDMA_MASK (1 << 22)
+#define CLOCK_GATING_XOR0_MASK (1 << 23)
+#define CLOCK_GATING_XOR1_MASK (1 << 24)
+#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30)
+
+#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50)
+#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54)
+
+static inline int pmu_to_irq(int pin)
+{
+ if (pin < NR_PMU_IRQS)
+ return pin + IRQ_DOVE_PMU_START;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_pmu(int irq)
+{
+ if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+ return irq - IRQ_DOVE_PMU_START;
+
+ return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
new file mode 100644
index 000000000000..356afda56853
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-dove/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/bridge-regs.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
new file mode 100644
index 000000000000..251d538541db
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-dove/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
new file mode 100644
index 000000000000..2c5cdd7a3eed
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/dove.h>
+
+#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE 0x20
+
+static void putc(const char c)
+{
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ /* Transmit fifo not full? */
+ if (*UART_LSR & LSR_THRE)
+ break;
+ }
+
+ *UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8b2c974755c6
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-dove/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfd800000
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
new file mode 100644
index 000000000000..61bfcb3b08c2
--- /dev/null
+++ b/arch/arm/mach-dove/irq.c
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-dove/irq.c
+ *
+ * Dove IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <plat/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/pm.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int irqoff;
+ BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
+
+ irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
+ 3 + irq - IRQ_DOVE_GPIO_24_31;
+
+ orion_gpio_irq_handler(irqoff << 3);
+ if (irq == IRQ_DOVE_HIGH_GPIO) {
+ orion_gpio_irq_handler(40);
+ orion_gpio_irq_handler(48);
+ orion_gpio_irq_handler(56);
+ }
+}
+
+static void pmu_irq_mask(unsigned int irq)
+{
+ int pin = irq_to_pmu(irq);
+ u32 u;
+
+ u = readl(PMU_INTERRUPT_MASK);
+ u &= ~(1 << (pin & 31));
+ writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_unmask(unsigned int irq)
+{
+ int pin = irq_to_pmu(irq);
+ u32 u;
+
+ u = readl(PMU_INTERRUPT_MASK);
+ u |= 1 << (pin & 31);
+ writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_ack(unsigned int irq)
+{
+ int pin = irq_to_pmu(irq);
+ u32 u;
+
+ u = ~(1 << (pin & 31));
+ writel(u, PMU_INTERRUPT_CAUSE);
+}
+
+static struct irq_chip pmu_irq_chip = {
+ .name = "pmu_irq",
+ .mask = pmu_irq_mask,
+ .unmask = pmu_irq_unmask,
+ .ack = pmu_irq_ack,
+};
+
+static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
+
+ cause &= readl(PMU_INTERRUPT_MASK);
+ if (cause == 0) {
+ do_bad_IRQ(irq, desc);
+ return;
+ }
+
+ for (irq = 0; irq < NR_PMU_IRQS; irq++) {
+ if (!(cause & (1 << irq)))
+ continue;
+ irq = pmu_to_irq(irq);
+ desc = irq_desc + irq;
+ desc_handle_irq(irq, desc);
+ }
+}
+
+void __init dove_init_irq(void)
+{
+ int i;
+
+ orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+ orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+ /*
+ * Mask and clear GPIO IRQ interrupts.
+ */
+ writel(0, GPIO_LEVEL_MASK(0));
+ writel(0, GPIO_EDGE_MASK(0));
+ writel(0, GPIO_EDGE_CAUSE(0));
+
+ /*
+ * Mask and clear PMU interrupts
+ */
+ writel(0, PMU_INTERRUPT_MASK);
+ writel(0, PMU_INTERRUPT_CAUSE);
+
+ for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
+ set_irq_chip(i, &orion_gpio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ irq_desc[i].status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+
+ for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
+ set_irq_chip(i, &pmu_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ irq_desc[i].status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
+}
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
new file mode 100644
index 000000000000..502d1ca2f4b7
--- /dev/null
+++ b/arch/arm/mach-dove/pcie.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/mach-dove/pcie.c
+ *
+ * PCIe functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/delay.h>
+#include <plat/pcie.h>
+#include <mach/irqs.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+struct pcie_port {
+ u8 index;
+ u8 root_bus_nr;
+ void __iomem *base;
+ spinlock_t conf_lock;
+ char io_space_name[16];
+ char mem_space_name[16];
+ struct resource res[2];
+};
+
+static struct pcie_port pcie_port[2];
+static int num_pcie_ports;
+
+
+static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct pcie_port *pp;
+
+ if (nr >= num_pcie_ports)
+ return 0;
+
+ pp = &pcie_port[nr];
+ pp->root_bus_nr = sys->busnr;
+
+ /*
+ * Generic PCIe unit setup.
+ */
+ orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+ orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+
+ /*
+ * IORESOURCE_IO
+ */
+ snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+ "PCIe %d I/O", pp->index);
+ pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+ pp->res[0].name = pp->io_space_name;
+ if (pp->index == 0) {
+ pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
+ pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
+ } else {
+ pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
+ pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
+ }
+ pp->res[0].flags = IORESOURCE_IO;
+ if (request_resource(&ioport_resource, &pp->res[0]))
+ panic("Request PCIe IO resource failed\n");
+ sys->resource[0] = &pp->res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+ "PCIe %d MEM", pp->index);
+ pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+ pp->res[1].name = pp->mem_space_name;
+ if (pp->index == 0) {
+ pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
+ pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+ } else {
+ pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
+ pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+ }
+ pp->res[1].flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pp->res[1]))
+ panic("Request PCIe Memory resource failed\n");
+ sys->resource[1] = &pp->res[1];
+
+ sys->resource[2] = NULL;
+
+ return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+ int i;
+
+ for (i = num_pcie_ports - 1; i >= 0; i--) {
+ int rbus = pcie_port[i].root_bus_nr;
+ if (rbus != -1 && rbus <= bus)
+ break;
+ }
+
+ return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+ /*
+ * Don't go out when trying to access nonexisting devices
+ * on the local bus.
+ */
+ if (bus == pp->root_bus_nr && dev > 1)
+ return 0;
+
+ return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ struct pcie_port *pp = bus_to_port(bus->number);
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ struct pcie_port *pp = bus_to_port(bus->number);
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static struct pci_ops pcie_ops = {
+ .read = pcie_rd_conf,
+ .write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+ /*
+ * Prevent enumeration of root complex.
+ */
+ if (dev->bus->parent == NULL && dev->devfn == 0) {
+ int i;
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct pci_bus *bus;
+
+ if (nr < num_pcie_ports) {
+ bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+ } else {
+ bus = NULL;
+ BUG();
+ }
+
+ return bus;
+}
+
+static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+ return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
+}
+
+static struct hw_pci dove_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = dove_pcie_setup,
+ .scan = dove_pcie_scan_bus,
+ .map_irq = dove_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int index, unsigned long base)
+{
+ printk(KERN_INFO "Dove PCIe port %d: ", index);
+
+ if (orion_pcie_link_up((void __iomem *)base)) {
+ struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+ printk(KERN_INFO "link up\n");
+
+ pp->index = index;
+ pp->root_bus_nr = -1;
+ pp->base = (void __iomem *)base;
+ spin_lock_init(&pp->conf_lock);
+ memset(pp->res, 0, sizeof(pp->res));
+ } else {
+ printk(KERN_INFO "link down, ignoring\n");
+ }
+}
+
+void __init dove_pcie_init(int init_port0, int init_port1)
+{
+ if (init_port0)
+ add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
+
+ if (init_port1)
+ add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
+
+ pci_common_init(&dove_pci);
+}
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 0aca451b216d..8bf09ae5b347 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -33,10 +33,18 @@ config MACH_SHEEVAPLUG
Marvell SheevaPlug Reference Board.
config MACH_TS219
- bool "QNAP TS-119 and TS-219 Turbo NAS"
+ bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
- QNAP TS-119 and TS-219 Turbo NAS devices.
+ QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
+ devices.
+
+config MACH_TS41X
+ bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
+ devices.
config MACH_OPENRD_BASE
bool "Marvell OpenRD Base Board"
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 80ab0ec90ee1..9f2f67b2b63d 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,7 +5,8 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
-obj-$(CONFIG_MACH_TS219) += ts219-setup.o
+obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index ec1a64f263d2..2830f0fe80e0 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -1,6 +1,6 @@
/*
*
- * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup
*
* Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
* Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
@@ -14,87 +14,17 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <linux/timex.h>
-#include <linux/serial_reg.h>
-#include <linux/pci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatability with
- * the QNAP firmware.
- * Layout as used by QNAP:
- * 0x00000000-0x00080000 : "U-Boot"
- * 0x00200000-0x00400000 : "Kernel"
- * 0x00400000-0x00d00000 : "RootFS"
- * 0x00d00000-0x01000000 : "RootFS2"
- * 0x00080000-0x000c0000 : "U-Boot Config"
- * 0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_ts219_partitions[] = {
- {
- .name = "U-Boot",
- .size = 0x00080000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00200000,
- }, {
- .name = "RootFS1",
- .size = 0x00900000,
- .offset = 0x00400000,
- }, {
- .name = "RootFS2",
- .size = 0x00300000,
- .offset = 0x00d00000,
- }, {
- .name = "U-Boot Config",
- .size = 0x00040000,
- .offset = 0x00080000,
- }, {
- .name = "NAS Config",
- .size = 0x00140000,
- .offset = 0x000c0000,
- },
-};
-
-static const struct flash_platform_data qnap_ts219_flash = {
- .type = "m25p128",
- .name = "spi_flash",
- .parts = qnap_ts219_partitions,
- .nr_parts = ARRAY_SIZE(qnap_ts219_partitions),
-};
-
-static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &qnap_ts219_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
+#include "tsx1x-common.h"
static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
I2C_BOARD_INFO("s35390a", 0x30),
@@ -152,36 +82,10 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
MPP14_UART1_RXD, /* PIC controller */
MPP15_GPIO, /* USB Copy button */
MPP16_GPIO, /* Reset button */
+ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
0
};
-
-/*****************************************************************************
- * QNAP TS-x19 specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_ts219_power_off(void)
-{
- /* 19200 baud divisor */
- const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
- pr_info("%s: triggering power-off...\n", __func__);
-
- /* hijack UART1 and reset into sane state (19200,8n1) */
- writel(0x83, UART1_REG(LCR));
- writel(divisor & 0xff, UART1_REG(DLL));
- writel((divisor >> 8) & 0xff, UART1_REG(DLM));
- writel(0x03, UART1_REG(LCR));
- writel(0x00, UART1_REG(IER));
- writel(0x00, UART1_REG(FCR));
- writel(0x00, UART1_REG(MCR));
-
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
-}
-
static void __init qnap_ts219_init(void)
{
/*
@@ -192,9 +96,7 @@ static void __init qnap_ts219_init(void)
kirkwood_uart0_init();
kirkwood_uart1_init(); /* A PIC controller is connected here. */
- spi_register_board_info(qnap_ts219_spi_slave_info,
- ARRAY_SIZE(qnap_ts219_spi_slave_info));
- kirkwood_spi_init();
+ qnap_tsx1x_register_flash();
kirkwood_i2c_init();
i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
@@ -202,7 +104,7 @@ static void __init qnap_ts219_init(void)
kirkwood_ehci_init();
platform_device_register(&qnap_ts219_button_device);
- pm_power_off = qnap_ts219_power_off;
+ pm_power_off = qnap_tsx1x_power_off;
}
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
new file mode 100644
index 000000000000..de49c2d9e74b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -0,0 +1,154 @@
+/*
+ *
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = 43,
+ .desc = "USB Copy",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 37,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
+ .buttons = qnap_ts41x_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons),
+};
+
+static struct platform_device qnap_ts41x_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &qnap_ts41x_button_data,
+ }
+};
+
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP6_SYSRST_OUTn,
+ MPP7_PEX_RST_OUTn,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_UART1_TXD, /* PIC controller */
+ MPP14_UART1_RXD, /* PIC controller */
+ MPP15_SATA0_ACTn,
+ MPP16_SATA1_ACTn,
+ MPP20_GE1_0,
+ MPP21_GE1_1,
+ MPP22_GE1_2,
+ MPP23_GE1_3,
+ MPP24_GE1_4,
+ MPP25_GE1_5,
+ MPP26_GE1_6,
+ MPP27_GE1_7,
+ MPP30_GE1_10,
+ MPP31_GE1_11,
+ MPP32_GE1_12,
+ MPP33_GE1_13,
+ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
+ MPP37_GPIO, /* Reset button */
+ MPP43_GPIO, /* USB Copy button */
+ MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */
+ MPP45_GPIO, /* JP1: 0: console, 1: LCD */
+ MPP46_GPIO, /* External SATA HDD1 error indicator */
+ MPP47_GPIO, /* External SATA HDD2 error indicator */
+ MPP48_GPIO, /* External SATA HDD3 error indicator */
+ MPP49_GPIO, /* External SATA HDD4 error indicator */
+ 0
+};
+
+static void __init qnap_ts41x_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(qnap_ts41x_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_uart1_init(); /* A PIC controller is connected here. */
+ qnap_tsx1x_register_flash();
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+ kirkwood_ge00_init(&qnap_ts41x_ge00_data);
+ kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+ kirkwood_sata_init(&qnap_ts41x_sata_data);
+ kirkwood_ehci_init();
+ platform_device_register(&qnap_ts41x_button_device);
+
+ pm_power_off = qnap_tsx1x_power_off;
+
+}
+
+static int __init ts41x_pci_init(void)
+{
+ if (machine_is_ts41x())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(ts41x_pci_init);
+
+MACHINE_START(TS41X, "QNAP TS-41x")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = qnap_ts41x_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
new file mode 100644
index 000000000000..7221c20b2afa
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+/*
+ * QNAP TS-x1x Boards flash
+ */
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatability with
+ * the QNAP firmware.
+ * Layout as used by QNAP:
+ * 0x00000000-0x00080000 : "U-Boot"
+ * 0x00200000-0x00400000 : "Kernel"
+ * 0x00400000-0x00d00000 : "RootFS"
+ * 0x00d00000-0x01000000 : "RootFS2"
+ * 0x00080000-0x000c0000 : "U-Boot Config"
+ * 0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+struct mtd_partition qnap_tsx1x_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00900000,
+ .offset = 0x00400000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00300000,
+ .offset = 0x00d00000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00040000,
+ .offset = 0x00080000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00140000,
+ .offset = 0x000c0000,
+ },
+};
+
+const struct flash_platform_data qnap_tsx1x_flash = {
+ .type = "m25p128",
+ .name = "spi_flash",
+ .parts = qnap_tsx1x_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
+};
+
+struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &qnap_tsx1x_flash,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+void qnap_tsx1x_register_flash(void)
+{
+ spi_register_board_info(qnap_tsx1x_spi_slave_info,
+ ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
+ kirkwood_spi_init();
+}
+
+
+/*****************************************************************************
+ * QNAP TS-x1x specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx1x_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack UART1 and reset into sane state (19200,8n1) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command 'A' to PIC */
+ writel('A', UART1_REG(TX));
+}
+
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
new file mode 100644
index 000000000000..9a592962a6ea
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -0,0 +1,7 @@
+#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
+#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
+
+extern void qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_power_off(void);
+
+#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9264d814cd7a..4958ef2c6254 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -388,7 +388,7 @@ config CPU_FEROCEON_OLD_ID
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_V6
@@ -764,6 +764,15 @@ config CACHE_L2X0
help
This option enables the L2x0 PrimeCell.
+config CACHE_TAUROS2
+ bool "Enable the Tauros2 L2 cache controller"
+ depends on ARCH_DOVE
+ default y
+ select OUTER_CACHE
+ help
+ This option enables the Tauros2 L2 cache controller (as
+ found on PJ1/PJ4).
+
config CACHE_XSC3L2
bool "Enable the L2 cache on XScale3"
depends on CPU_XSC3
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 055cb2aa8134..06bcf2e73858 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -87,4 +87,4 @@ obj-$(CONFIG_CPU_V7) += proc-v7.o
obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
-
+obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
new file mode 100644
index 000000000000..50868651890f
--- /dev/null
+++ b/arch/arm/mm/cache-tauros2.c
@@ -0,0 +1,263 @@
+/*
+ * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - PJ1 CPU Core Datasheet,
+ * Document ID MV-S104837-01, Rev 0.7, January 24 2008.
+ * - PJ4 CPU Core Datasheet,
+ * Document ID MV-S105190-00, Rev 0.7, March 14 2008.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-tauros2.h>
+
+
+/*
+ * When Tauros2 is used on a CPU that supports the v7 hierarchical
+ * cache operations, the cache handling code in proc-v7.S takes care
+ * of everything, including handling DMA coherency.
+ *
+ * So, we only need to register outer cache operations here if we're
+ * being used on a pre-v7 CPU, and we only need to build support for
+ * outer cache operations into the kernel image if the kernel has been
+ * configured to support a pre-v7 CPU.
+ */
+#if __LINUX_ARM_ARCH__ < 7
+/*
+ * Low-level cache maintenance operations.
+ */
+static inline void tauros2_clean_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
+}
+
+static inline void tauros2_clean_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
+}
+
+static inline void tauros2_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive.
+ */
+#define CACHE_LINE_SIZE 32
+
+static void tauros2_inv_range(unsigned long start, unsigned long end)
+{
+ /*
+ * Clean and invalidate partial first cache line.
+ */
+ if (start & (CACHE_LINE_SIZE - 1)) {
+ tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+ start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+ }
+
+ /*
+ * Clean and invalidate partial last cache line.
+ */
+ if (end & (CACHE_LINE_SIZE - 1)) {
+ tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+ end &= ~(CACHE_LINE_SIZE - 1);
+ }
+
+ /*
+ * Invalidate all full cache lines between 'start' and 'end'.
+ */
+ while (start < end) {
+ tauros2_inv_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+
+static void tauros2_clean_range(unsigned long start, unsigned long end)
+{
+ start &= ~(CACHE_LINE_SIZE - 1);
+ while (start < end) {
+ tauros2_clean_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+
+static void tauros2_flush_range(unsigned long start, unsigned long end)
+{
+ start &= ~(CACHE_LINE_SIZE - 1);
+ while (start < end) {
+ tauros2_clean_inv_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+#endif
+
+static inline u32 __init read_extra_features(void)
+{
+ u32 u;
+
+ __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+ return u;
+}
+
+static inline void __init write_extra_features(u32 u)
+{
+ __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+ u32 u;
+
+ /*
+ * Read the CPU Extra Features register and verify that the
+ * Disable L2 Prefetch bit is set.
+ */
+ u = read_extra_features();
+ if (!(u & 0x01000000)) {
+ printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
+ write_extra_features(u | 0x01000000);
+ }
+}
+
+static inline int __init cpuid_scheme(void)
+{
+ extern int processor_id;
+
+ return !!((processor_id & 0x000f0000) == 0x000f0000);
+}
+
+static inline u32 __init read_mmfr3(void)
+{
+ u32 mmfr3;
+
+ __asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
+
+ return mmfr3;
+}
+
+static inline u32 __init read_actlr(void)
+{
+ u32 actlr;
+
+ __asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+
+ return actlr;
+}
+
+static inline void __init write_actlr(u32 actlr)
+{
+ __asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
+}
+
+void __init tauros2_init(void)
+{
+ extern int processor_id;
+ char *mode;
+
+ disable_l2_prefetch();
+
+#ifdef CONFIG_CPU_32v5
+ if ((processor_id & 0xff0f0000) == 0x56050000) {
+ u32 feat;
+
+ /*
+ * v5 CPUs with Tauros2 have the L2 cache enable bit
+ * located in the CPU Extra Features register.
+ */
+ feat = read_extra_features();
+ if (!(feat & 0x00400000)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ write_extra_features(feat | 0x00400000);
+ }
+
+ mode = "ARMv5";
+ outer_cache.inv_range = tauros2_inv_range;
+ outer_cache.clean_range = tauros2_clean_range;
+ outer_cache.flush_range = tauros2_flush_range;
+ }
+#endif
+
+#ifdef CONFIG_CPU_32v6
+ /*
+ * Check whether this CPU lacks support for the v7 hierarchical
+ * cache ops. (PJ4 is in its v6 personality mode if the MMFR3
+ * register indicates no support for the v7 hierarchical cache
+ * ops.)
+ */
+ if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
+ /*
+ * When Tauros2 is used in an ARMv6 system, the L2
+ * enable bit is in the ARMv6 ARM-mandated position
+ * (bit [26] of the System Control Register).
+ */
+ if (!(get_cr() & 0x04000000)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ adjust_cr(0x04000000, 0x04000000);
+ }
+
+ mode = "ARMv6";
+ outer_cache.inv_range = tauros2_inv_range;
+ outer_cache.clean_range = tauros2_clean_range;
+ outer_cache.flush_range = tauros2_flush_range;
+ }
+#endif
+
+#ifdef CONFIG_CPU_32v7
+ /*
+ * Check whether this CPU has support for the v7 hierarchical
+ * cache ops. (PJ4 is in its v7 personality mode if the MMFR3
+ * register indicates support for the v7 hierarchical cache
+ * ops.)
+ *
+ * (Although strictly speaking there may exist CPUs that
+ * implement the v7 cache ops but are only ARMv6 CPUs (due to
+ * not complying with all of the other ARMv7 requirements),
+ * there are no real-life examples of Tauros2 being used on
+ * such CPUs as of yet.)
+ */
+ if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
+ u32 actlr;
+
+ /*
+ * When Tauros2 is used in an ARMv7 system, the L2
+ * enable bit is located in the Auxiliary System Control
+ * Register (which is the only register allowed by the
+ * ARMv7 spec to contain fine-grained cache control bits).
+ */
+ actlr = read_actlr();
+ if (!(actlr & 0x00000002)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ write_actlr(actlr | 0x00000002);
+ }
+
+ mode = "ARMv7";
+ }
+#endif
+
+ if (mode == NULL) {
+ printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n");
+ return;
+ }
+
+ printk(KERN_INFO "Tauros2: L2 cache support initialised "
+ "in %s mode.\n", mode);
+}
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 70f75d2e3ead..5485c821101c 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -130,9 +130,16 @@ ENTRY(cpu_v6_set_pte_ext)
-
+ .type cpu_v6_name, #object
cpu_v6_name:
.asciz "ARMv6-compatible processor"
+ .size cpu_v6_name, . - cpu_v6_name
+
+ .type cpu_pj4_name, #object
+cpu_pj4_name:
+ .asciz "Marvell PJ4 processor"
+ .size cpu_pj4_name, . - cpu_pj4_name
+
.align
__INIT
@@ -241,3 +248,27 @@ __v6_proc_info:
.long v6_user_fns
.long v6_cache_fns
.size __v6_proc_info, . - __v6_proc_info
+
+ .type __pj4_v6_proc_info, #object
+__pj4_v6_proc_info:
+ .long 0x560f5810
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_XN | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __v6_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pj4_name
+ .long v6_processor_functions
+ .long v6wbi_tlb_fns
+ .long v6_user_fns
+ .long v6_cache_fns
+ .size __pj4_v6_proc_info, . - __pj4_v6_proc_info
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3c20dae43ce2..e11e1cda4ba2 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -780,7 +780,7 @@ config RTC_DRV_TX4939
config RTC_DRV_MV
tristate "Marvell SoC RTC"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || ARCH_DOVE
help
If you say yes here you will get support for the in-chip RTC
that can be found in some of Marvell's SoC devices, such as