staging: wlags49_h2: Fix spelling Endianess to Endianness in wlags49_h2

Correct spelling typo "Endianess" to "Endianness" in wlags49_h2.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 17 insertions, 17 deletions

diff --git a/drivers/staging/wlags49_h2/hcf.c b/drivers/staging/wlags49_h2/hcf.c
index 5957c3a439ac..366e4a4b75c5 100644
--- a/drivers/staging/wlags49_h2/hcf.c
+++ b/drivers/staging/wlags49_h2/hcf.c
@@ -2871,8 +2871,8 @@ or
 *   The Assert validates the HCF assumption about Hermes implementation upon which the range of
 *   Pseudo-RIDs is based.
 *   Then the control fields up to the start of the 802.3 frame are read from the NIC into the lookahead buffer.
-*   The status field is converted to native Endianess.
-*   The length is, after implicit Endianess conversion if needed, and adjustment for the 14 bytes of the
+*   The status field is converted to native Endianness.
+*   The length is, after implicit Endianness conversion if needed, and adjustment for the 14 bytes of the
 *   802.3 MAC header, stored in IFB_RxLen.
 *   In MAC Monitor mode, 802.11 control frames with a TOTAL length of 14 are received, so without this
 *   length adjustment, IFB_RxLen could not be used to distinguish these frames from "no frame".
@@ -2894,7 +2894,7 @@ or
 *     - the Hermes reported Tunnel encapsulation or
 *     - the Hermes reported 1042 Encapsulation and hcf_encap reports that the HCF would not have used
 *       1042 as the encapsulation mechanism
-*   Note that the first field of the RxFS in bufp has Native Endianess due to the conversion done by the
+*   Note that the first field of the RxFS in bufp has Native Endianness due to the conversion done by the
 *   BE_PAR in get_frag.
 *36: The Type field is the only word kept (after moving) of the just read 8 bytes, it is moved to the
 *   L-field.  The original L-field and 6 byte SNAP header are discarded, so IFB_RxLen and buf_addr must
@@ -3831,7 +3831,7 @@ get_fid( IFBP ifbp )
  *.DESCRIPTION
  * process the single byte (if applicable) read by the previous get_frag and copy len (or len-1) bytes from
  * NIC to bufp.
- * On a Big Endian platform, the parameter word_len controls the number of leading bytes whose endianess is
+ * On a Big Endian platform, the parameter word_len controls the number of leading bytes whose endianness is
  * converted (i.e. byte swapped)
  *
  *
@@ -3980,7 +3980,7 @@ get_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) )
  *    appropriate means on H-I: always
  *    and on H-II if F/W supplier reflects a primary (i.e. only after an Hermes Reset or Init
  *    command).
- *    QUESTION ;? !!!!!! should, For each of the above RIDs the Endianess is converted to native Endianess.
+ *    QUESTION ;? !!!!!! should, For each of the above RIDs the Endianness is converted to native Endianness.
  *    Only the return code of the first hcf_get_info is used. All hcf_get_info calls are made, regardless of
  *    the success or failure of the 1st hcf_get_info. The assumptions are:
  *     - if any call fails, they all fail, so remembering the result of the 1st call is adequate
diff --git a/drivers/staging/wlags49_h2/hcf.h b/drivers/staging/wlags49_h2/hcf.h
index 95527b5cf863..68e23303b5e8 100644
--- a/drivers/staging/wlags49_h2/hcf.h
+++ b/drivers/staging/wlags49_h2/hcf.h
@@ -90,7 +90,7 @@
 
 #define LOF(x) 			(sizeof(x)/sizeof(hcf_16)-1)
 
-/*	Endianess
+/*	Endianness
  *	Little Endian (a.k.a. Intel), least significant byte first
  *	Big Endian (a.k.a. Motorola), most significant byte first
  *
@@ -101,7 +101,7 @@
  */
 
 /* To increase portability, use unsigned char and unsigned char * when accessing parts of larger
- * types to convert their Endianess
+ * types to convert their Endianness
  */
 
 #define CNV_END_SHORT(w)  (hcf_16)( ((hcf_16)(w) & 0x00FF) << 8 | ((hcf_16)(w) & 0xFF00) >> 8 )
@@ -109,14 +109,14 @@
 
 #if HCF_BIG_ENDIAN
 //******************************************** B I G   E N D I A N *******************************************
-#define CNV_LITTLE_TO_SHORT(w)	CNV_END_SHORT(w)	//    endianess conversion needed
-#define CNV_BIG_TO_SHORT(w)		(w)				// no endianess conversion needed
+#define CNV_LITTLE_TO_SHORT(w)	CNV_END_SHORT(w)	//    endianness conversion needed
+#define CNV_BIG_TO_SHORT(w)		(w)				// no endianness conversion needed
 #define CNV_LITTLE_TO_LONG(dw)	CNV_END_LONG(dw)
 #define CNV_LONG_TO_LITTLE(dw)	CNV_END_LONG(dw)
 #else
 //****************************************** L I T T L E   E N D I A N ****************************************
-#define CNV_LITTLE_TO_SHORT(w) 	(w)				// no endianess conversion needed
-#define CNV_BIG_TO_SHORT(w)		CNV_END_SHORT(w)	//    endianess conversion needed
+#define CNV_LITTLE_TO_SHORT(w) 	(w)				// no endianness conversion needed
+#define CNV_BIG_TO_SHORT(w)		CNV_END_SHORT(w)	//    endianness conversion needed
 #define CNV_LITTLE_TO_LONG(dw)	(dw)
 #define CNV_LONG_TO_LITTLE(dw)	(dw)
 
diff --git a/drivers/staging/wlags49_h2/mmd.c b/drivers/staging/wlags49_h2/mmd.c
index c8f52107e6ca..7204a373bc51 100644
--- a/drivers/staging/wlags49_h2/mmd.c
+++ b/drivers/staging/wlags49_h2/mmd.c
@@ -101,10 +101,10 @@
 *	supp	address of the supplier specification
 *
 *	Description: mmd_check_comp is a support routine to check the compatibility between an actor and a
-*	supplier.  mmd_check_comp is independent of the endianess of the actp and supp structures. This is
+*	supplier.  mmd_check_comp is independent of the endianness of the actp and supp structures. This is
 *	achieved by checking the "bottom" or "role" fields of these structures. Since these fields are restricted
 *	to a limited range, comparing the contents to a value with a known endian-ess gives a clue to their actual
-*	endianess.
+*	endianness.
 *
 *.DIAGRAM
 *1a: The role-field of the actor structure has a known non-zero, not "byte symmetric" value (namely
@@ -114,16 +114,16 @@
 *	for a supplier. A supplier has always exactly 1 variant,top,bottom record with (officially, but see the
 *	note below) each of these 3 values in the range 1 through 99, so one byte of the word value of variant,
 *	top and bottom words is 0x00 and the other byte is non-zero. Whether the lowest address byte or the
-*	highest address byte is non-zero depends on the Endianess of the LTV. If and only if the word value of
+*	highest address byte is non-zero depends on the Endianness of the LTV. If and only if the word value of
 *	bottom is less than 0x0100, the supplier is Native Endian.
 *	NOTE: the variant field of the supplier structure can not be used for the Endian Detection Algorithm,
 *	because a a zero-valued variant has been used as Controlled Deployment indication in the past.
 *	Note: An actor may have multiple sets of variant,top,bottom records, including dummy sets with variant,
-*	top and bottom fields with a zero-value. As a consequence the endianess of the actor can not be determined
+*	top and bottom fields with a zero-value. As a consequence the endianness of the actor can not be determined
 *	based on its variant,top,bottom values.
 *
 *	Note: the L and T field of the structures are always in Native Endian format, so you can not draw
-*	conclusions concerning the Endianess of the structure based on these two fields.
+*	conclusions concerning the Endianness of the structure based on these two fields.
 *
 *1b/2b
 *	The only purpose of the CFG_RANGE_SPEC_BYTE_STRCT is to give easy access to the non-zero byte of the word
@@ -149,7 +149,7 @@
 *
 *	This is implemented as:
 *	#if HCF_BIG_ENDIAN == 0	//platform is LE
-*		sup/act_endian becomes reverse of structure-endianess as determined in 1a/1b
+*		sup/act_endian becomes reverse of structure-endianness as determined in 1a/1b
 *	#endif
 *6:	Each of the actor variant-bottom-top records is checked against the (single) supplier variant-bottom-top
 *	range till either an acceptable match is found or all actor records are tried. As explained above, due to