Merge commit 'c104f1fa1ecf4ee0fc06e31b1f77630b2551be81' into stable/for-linus-3.4

* commit 'c104f1fa1ecf4ee0fc06e31b1f77630b2551be81': (14566 commits)
  cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS
  sparc64: Eliminate obsolete __handle_softirq() function
  sparc64: Fix bootup crash on sun4v.
  kconfig: delete last traces of __enabled_ from autoconf.h
  Revert "kconfig: fix __enabled_ macros definition for invisible and un-selected symbols"
  kconfig: fix IS_ENABLED to not require all options to be defined
  irq_domain: fix type mismatch in debugfs output format
  staging: android: fix mem leaks in __persistent_ram_init()
  staging: vt6656: Don't leak memory in drivers/staging/vt6656/ioctl.c::private_ioctl()
  staging: iio: hmc5843: Fix crash in probe function.
  panic: fix stack dump print on direct call to panic()
  drivers/rtc/rtc-pl031.c: enable clock on all ST variants
  Revert "mm: vmscan: fix misused nr_reclaimed in shrink_mem_cgroup_zone()"
  hugetlb: fix race condition in hugetlb_fault()
  drivers/rtc/rtc-twl.c: use static register while reading time
  drivers/rtc/rtc-s3c.c: add placeholder for driver private data
  drivers/rtc/rtc-s3c.c: fix compilation error
  MAINTAINERS: add PCDP console maintainer
  memcg: do not open code accesses to res_counter members
  drivers/rtc/rtc-efi.c: fix section mismatch warning
  ...

1 files changed, 0 insertions, 253 deletions

diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
deleted file mode 100644
index aff6e85a97c6..000000000000
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/s3c2412.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-
-#include <mach/idle.h>
-
-#include <plat/cpu-freq.h>
-
-#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-power.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-dsc.h>
-#include <plat/regs-spi.h>
-#include <mach/regs-s3c2412.h>
-
-#include <plat/s3c2412.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
-#include <plat/nand-core.h>
-
-#ifndef CONFIG_CPU_S3C2412_ONLY
-void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
-
-static inline void s3c2412_init_gpio2(void)
-{
-	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
-}
-#else
-#define s3c2412_init_gpio2() do { } while(0)
-#endif
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2412_iodesc[] __initdata = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-	{
-		.virtual = (unsigned long)S3C2412_VA_SSMC,
-		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
-		.length	 = SZ_1M,
-		.type	 = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)S3C2412_VA_EBI,
-		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
-		.length	 = SZ_1M,
-		.type	 = MT_DEVICE,
-	},
-};
-
-/* uart registration process */
-
-void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
-
-	/* rename devices that are s3c2412/s3c2413 specific */
-	s3c_device_sdi.name  = "s3c2412-sdi";
-	s3c_device_lcd.name  = "s3c2412-lcd";
-	s3c_nand_setname("s3c2412-nand");
-
-	/* alter IRQ of SDI controller */
-
-	s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
-	s3c_device_sdi.resource[1].end   = IRQ_S3C2412_SDI;
-
-	/* spi channel related changes, s3c2412/13 specific */
-	s3c_device_spi0.name = "s3c2412-spi";
-	s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
-	s3c_device_spi1.name = "s3c2412-spi";
-	s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
-	s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
-
-}
-
-/* s3c2412_idle
- *
- * use the standard idle call by ensuring the idle mode
- * in power config, then issuing the idle co-processor
- * instruction
-*/
-
-static void s3c2412_idle(void)
-{
-	unsigned long tmp;
-
-	/* ensure our idle mode is to go to idle */
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
-	tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	cpu_do_idle();
-}
-
-void s3c2412_restart(char mode, const char *cmd)
-{
-	if (mode == 's')
-		soft_restart(0);
-
-	/* errata "Watch-dog/Software Reset Problem" specifies that
-	 * this reset must be done with the SYSCLK sourced from
-	 * EXTCLK instead of FOUT to avoid a glitch in the reset
-	 * mechanism.
-	 *
-	 * See the watchdog section of the S3C2412 manual for more
-	 * information on this fix.
-	 */
-
-	__raw_writel(0x00, S3C2412_CLKSRC);
-	__raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST);
-
-	mdelay(1);
-}
-
-/* s3c2412_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2412_map_io(void)
-{
-	/* move base of IO */
-
-	s3c2412_init_gpio2();
-
-	/* set our idle function */
-
-	s3c24xx_idle = s3c2412_idle;
-
-	/* register our io-tables */
-
-	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
-}
-
-void __init_or_cpufreq s3c2412_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
-
-	clk_mpll.rate = fclk;
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
-	hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c2412_setup_clocks();
-	s3c2412_baseclk_add();
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2412 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-struct bus_type s3c2412_subsys = {
-	.name = "s3c2412-core",
-	.dev_name = "s3c2412-core",
-};
-
-static int __init s3c2412_core_init(void)
-{
-	return subsys_system_register(&s3c2412_subsys, NULL);
-}
-
-core_initcall(s3c2412_core_init);
-
-static struct device s3c2412_dev = {
-	.bus		= &s3c2412_subsys,
-};
-
-int __init s3c2412_init(void)
-{
-	printk("S3C2412: Initialising architecture\n");
-
-#ifdef CONFIG_PM
-	register_syscore_ops(&s3c2412_pm_syscore_ops);
-#endif
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
-	return device_register(&s3c2412_dev);
-}